[media] tm6000: rewrite IR support

The IR support were broken on my tests with HVR-900H. Also,
there were several issues on the current implementation.
This patch is a major rewrite of the IR support for this
- Improve debug messages;
- Don't do polling for interrrupt based IR;
- Add proper support for RC-5 protocol;
- Always provide 16 bits for NEC and RC-5;
- Fix polling code;
- Split polling functions from URB Interrupt ones;
- Don't hardcode the XTAL reference for tm6000 IR;
- If a URB submit fails, retries after 100ms;
- etc.

Tested on Hauppauge HVR-900H, with RC-5 and NEC remotes.

Issues on IR handling, on this device:
- Repeat events aren't detected (neither on NEC or RC-5);
- NEC codes are always provided with 16 bits.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add IR support for HVR-900H

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-xc2028: Better report signal strength

Fix lock bit to better indicate signal strength, from 4096 to
65535.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix IR register names

IR registers 0xd9 to 0xdf were badly named, making harder to
check what's the register accessed at the RC code. Fix the
name convention.

No functional changes on this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Warning cleanup

drivers/media/video/tm6000/tm6000-video.c: In function ‘tm6000_release’:
drivers/media/video/tm6000/tm6000-video.c:1608:7: warning: unused variable ‘err’ [-Wunused-variable]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix data check

beholder use a map with 3 bytes, but many rc maps have 2 bytes, so I add a workaround for beholder rc.

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix at bulk transfer

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix at interrupt reset

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: bugfix at tm6000_set_reg_mask() register setting

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: remove experimental depends

Signed-off-by: Stefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix tm6010 audio standard selection

A V4L2 standards mask may contain several standards. A more restricted
mask with just one standard is used when user needs to bind to an specific
standard that can't be auto-detect among a more generic mask.

So, Improve the autodetection logic to detect the correct audio standard
most of the time.

Based on a patch made by Dmitri Belimov <d.belimov@gmail.com>.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Add a few missing bits to alsa

There are some properties found on em28xx, but not on tm6000. Add
them, in order to be more consistent.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L: omap1_camera: fix missing <linux/module.h> include

Otherwise compilation breaks with:

...

after apparently no longer included recursively from other header files.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: lirc_imon: add a __user annotation

This silences the following Sparse warnings:
lirc_imon.c:404:32: warning: incorrect type in argument 1 (different address spaces)
lirc_imon.c:404:32:    expected void const [noderef] <asn:1>*<noident>
lirc_imon.c:404:32:    got char const *buf
lirc_imon.c:117:28: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
lirc_imon.c:117:28:    expected long ( *write )( ... )
lirc_imon.c:117:28:    got long ( static [toplevel] *<noident> )( ... )

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio: NUL terminate a user string

We pass this to fm_tx_set_radio_text() which expects a NUL terminated
string.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L2 spec: fix the description of V4L2_FBUF_CAP_SRC_CHROMAKEY

V4L2_FBUF_CAP_SRC_CHROMAKEY is the opposite of V4L2_FBUF_CAP_CHROMAKEY, but
according to the documentation it was the same. The terms 'video' and
'framebuffer' were accidentally swapped in the text.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
CC: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2 framework doc: clarify locking

  high-latency devices.

Thanks to Hans de Goede for our discussions on this topic.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L2 Spec: clarify usage of V4L2_FBUF_FLAG_PRIMARY

As per discussion during the 2011 V4L-DVB workshop.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L spec: fix typo and missing CAP_RDS documentation

For some reason the V4L2_TUNER_CAP_RDS_CONTROLS/BLOCK_IO capabilities were never
documented in the proper table. In addition, then RDS interface section incorrectly
referred to them as V4L2_TUNER_SUB_RDS_... instead of CAP_RDS_...

This is now fixed.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] go7007: Fix 2250 urb type

commit a846d8fce9e8be30046be3c512982bd0345e7015

The 2250 board uses bulk endpoint for interrupt handling,
and should use a bulk urb instead of an int urb.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Casting (void *) value returned by kmalloc is useless

The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dw2102: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drxd: Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib9090: limit the I2C speed

The intend of this patch is to limit the maximum I2C speed.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib8096P: add the reference board TFE8096P

The intend of this patch is to add the support for the DiBcom reference
board TFE8096P.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] add the support for DiBcom dib8096P

The purpose of this patch is to support the DiBcom chip dib8096P.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7090: add the reference board TFE7790E

The intend of this patch is to add the support for the DiBcom reference
board TFE7790E.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiB8000: improve the tuning and the SNR monitoring

This patches improves the tuning of the dib8000 and correct the monitoringr
of the SNR.The patch allows to faster detect that there is no ISDB-T channel
on the wanted frequency.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiBcom: correct warnings

The intend of this patch is to correct some warnings given.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7090: add the reference board TFE7090E

The intend of this patch is to add the support for the DiBcom reference
board TFE7090E.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7000p/dib0090: update the driver

This patch intends to update the dib7000p and dib0090 driver in order to
improve the performances.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: as102: Add support for Sky Italia Digital Key based on the same chip

Add support for the Sky Italia Digital Key, an USB dongle offered
by Sky Italia to its customers for use with their satellite set-top-boxes.
This is the "green led" model based on the Abilis as102 chip, while the
so called "blue led" model is based on the Avermedia A867 design.

Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Sylwester Nawrocki <snjw23@gmail.com>
Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: Add Terratec Cinergy HTC Stick

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: fix warnings: variable set but not used

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: drop usb_class_driver

Drop usb_class_driver and collaterals as it is not used

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: add easycap prefix to global functions names

Add easycap prefix to global function to reduce
possibility of name collision.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: remove unused members of struct easycap

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: easycap_usb_driver should be static to easycap_main.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: use usb_kill_urb wrapper functions

1. kill_video_usb can be used in all places where video urbs are killed
and reduce code repetition

2. remove unnecessary check for easycap == NULL in the function
as it is always checked by the calling function

3. rename the function to easycap_video_kill_urb to reduce
possibility of name conflict

4. implement also easycap_audio_kill_urb

5. simplify freeing urbs

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: drop initializations to 0 in the probe functions

peasycap was allocated using kzalloc so drop all
to zero initializations

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: streamline the code

change statements of types
if (err)
return err
else
do something

and
if (ok)
do something
else
return err

into

if (err)
return err

do something

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: compress initialization tables

1. saa and stk initialization tables are less then
256 entries
2. stk table can fit into u16 and saa into u8

size before
 text    data     bss     dec     hex filename
 105687    1072 1134800 1241559  12f1d7 easycap.ko

size after

 text    data     bss     dec     hex filename
 97919    1072 1134800 1233791  12d37f easycap.ko

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: remove linux/version.h include from easycap_ioctl.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] easycap: cleanup function usage

1. Remove declarations of none global functions from easycap.h
and make them static in the c-files.
2. Reorder static functions to reduce number of forward declarations.
3. Remove unused functions.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821.h: Line up defines

Line up constant defines to the same column.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Fix indent

Fix indent of statements to improve readability.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Move operators

Move operator in complex expression to the end of the line to preserve
consistency.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Fix definitions

Change multiple definitions in one statement into multiple statements
with one definition per statement.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Fix assignment

Change double assignment in one statement into two assignment
statements.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Change spaces

Change double spaces between lexemes into single spaces.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video.c: Delete empty line

Delete unnecessary empty line.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream.c: Fix indent

Change indent of statements to use tabs and to improve readability.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream.c: Remove braces

Delete curly braces around single if-else statements.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Remove braces

Remove unnecessary curly braces around single if statement.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upsstream-ch2.c: Move operators

Move operators in complex expressions to the end of the lines to
preserve consistency.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Fix indent

Change indent of statements with (less than 8) spaces to indent with
tabs.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-video-upstream-ch2.c: Line up comments

Line up comments to match indent of surrounding statements.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-medusa-video.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-medusa-video.c: Move operators

Plase operators in complex expressions at the end of the lines to
preserve consistency.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-medusa-video.c: Fix comment

Delete part of the comment that is not checked in code.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-medusa-reg.h: Line up defines

Line up constant defines to the same column. (also delete unnecessary
spaces in comments)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-medusa-defines.h: Line up defines

Line up constant defines to the same column.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-medusa-defines.h: Fix typo

Fix typo in comment in word 'decoder'.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-i2c.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-core.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-core.c: Fix indent

Change indent of statements that indented with spaces to indent with
tabs.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-core.c: Delete empty line

Delete redundant empty line.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-cards.c: Fix indent

Fix indent of statement to use tab instead of spaces.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-audio.h: Fix multiline defines

Change column of line continuation character ('\') and fix indent of
multiline defines.
Also line up remaining constant defines.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-audio.h: Line up defines

Line up defines to the same column.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-audio-upstream.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-audio-upstream.c: Move operators

Move operator of complex expression to the end of the lines to preserve
consistency.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-audio-upstream.c: Fix indent

Change wrong indent (with spaces and less than 7 columns) of statements
to tabs.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-alsa.c: Change line endings

Change obscure line endings to less obscure ones. (improve readability)

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-alsa.c: Fix indent

Delete unnecessary space before indented statement.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-alsa.c: Add braces to else clause

Add curly braces around else clause because corresponding if has them.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx25821-alsa.c: Line up comments

Line up comments to the same column.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media/radio/tef6862: fix checking return value of i2c_master_send

i2c_master_send returns negative errno, or else the number of bytes written.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: lirc_serial: Do not assume error codes returned by request_irq()

lirc_serial_probe() must fail if request_irq() returns an error, even if
it isn't EBUSY or EINVAL,

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: lirc_serial: Fix bogus error codes

Device not found?  ENODEV, not EINVAL.
Write to read-only device?  EPERM, not EBADF.
Invalid argument?  EINVAL, not ENOSYS.
Unsupported ioctl?  ENOIOCTLCMD, not ENOSYS.
Another function returned an error code?  Use that, don't replace it.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: lirc_serial: Fix deadlock on resume failure

A resume function cannot remove the device it is resuming!

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: lirc_serial: Free resources on failure paths of lirc_serial_probe()

Failure to allocate the I/O region leaves the IRQ allocated.
A later failure leaves them both allocated.

Reported-by: Torsten Crass <torsten.crass@eBiology.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: lirc_serial: Fix init/exit order

Currently the module init function registers a platform_device and
only then allocates its IRQ and I/O region.  This allows allocation to
race with the device's suspend() function.  Instead, allocate
resources in the platform driver's probe() function and free them in
the remove() function.

The module exit function removes the platform device before the
character device that provides access to it.  Change it to reverse the
order of initialisation.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] board-dm646x-evm.c: wrong register used in setup_vpif_input_channel_mode

The function setup_vpif_input_channel_mode() used the VSCLKDIS register
instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0
used a different clock from channel 1.

Clearly a copy-and-paste error.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ce168: remove experimental from Kconfig

I have been working many years without problems.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ce6230: remove experimental from Kconfig

I have been working many years without problems.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxd2820r: check bandwidth earlier for DVB-T/T2

It is param that could be potentially unsupported and
due to that it is good idea to check it very first.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxd2820r: switch to .get_if_frequency()

All tuners used with cxd2820r offers IF frequency so switch that.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18212: round IF frequency to close hardware value

Chip configures IF frequency resolution of 50 kHz. Round it nearest.
Off-by 50 kHz is almost nothing in real life...

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18212: implement .get_if_frequency()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] qt1010: implement .get_if_frequency()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt2060: implement .get_if_frequency()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9013: use .get_if_frequency() when possible

Get IF frequency from tuner if tuner provides it.

Remove TDA18271 and TDA18218 IF frequency hacks since both tuners provides .get_if_frequency().

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18218: implement .get_if_frequency()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Fix typos in VIDEO_CX231XX_DVB Kconfig entry

Commit ede676c72d ("[...] add digital support for PV SBTVD hybrid")
added "select MEDIA_TUNER_NXP18271" to the VIDEO_CX231XX_DVB Kconfig
entry. But there's no Kconfig symbol MEDIA_TUNER_NXP18271. That should
have been MEDIA_TUNER_TDA18271. (The code added in that commit uses
tda18271_attach, which is only available if MEDIA_TUNER_TDA18271 is
set.)

The selects of MEDIA_TUNER_XC5000 and MEDIA_TUNER_TDA18271 should only
be done if MEDIA_TUNER_CUSTOMISE isn't set.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>