Monam Agarwal [Sun, 9 Mar 2014 05:28:40 +0000 (10:58 +0530)]
Staging: iio/light: Fix return values in tsl2583.c
This patch fixes following smatch warnings:
/drivers/staging/iio/light/tsl2583.c:436 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
/drivers/staging/iio/light/tsl2583.c:448 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
/drivers/staging/iio/light/tsl2583.c:461 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
Chi Pham [Sun, 9 Mar 2014 09:39:04 +0000 (10:39 +0100)]
staging:dgnc: Removed assignments from if statements.
Coccinelle was used for this patch. The script is not complete (semantically) and might raise some checkpatch warnings in terms of indentation depending on existing code.
*** IFASSIGNMENT.COCCI START ***
/* Coccinelle script to handle assignments in if statements
* For compound statements, can so far only handle statements with the
* assignment on either extreme */
/* This rule is for simple cases
* e.g. just an assignment in if, possibly with unary operator */
@simple@
expression E1, E2;
statement S1, S2;
@@
+ E1 = E2;
if (
- (E1 = E2)
+ E1
)
S1 else S2
/* This rule is for compound statements where the assignment is on the right.*/
@right@
expression E, E1, E2;
statement S1, S2;
@@
(
/* and */
- if (E && (E1 = E2))
+ if (E) {
+ E1 = E2;
+ if (E1)
S1 else S2
+ } else S2
|
- if (E && (E1 = E2))
+ if (E) {
+ E1 = E2;
+ if (E1)
S1
+ }
/* or */
|
- if (E || (E1 = E2))
+ if (!E) {
+ E1 = E2;
+ if (E1)
S1 else S2
+ }
+ else S1
|
- if (E || (E1 = E2))
+ if (!E) {
+ E1 = E2;
+ if (E1) S1
+ } else
S1
/* not equal */
|
- if (E != (E1 = E2))
+ E1 = E2;
+ if (E != E1)
S1 else S2
|
- if (E != (E1 = E2))
+ E1 = E2;
+ if (E != E1)
S1
/* equal */
|
- if (E == (E1 = E2))
+ E1 = E2;
+ if (E == E1)
S1 else S2
|
- if (E == (E1 = E2))
+ E1 = E2;
+ if (E == E1)
S1
/* greater than */
|
- if (E > (E1 = E2))
+ E1 = E2;
+ if (E > E1)
S1 else S2
|
- if (E > (E1 = E2))
+ E1 = E2;
+ if (E > E1)
S1
/* less than */
|
- if (E < (E1 = E2))
+ E1 = E2;
+ if (E < E1)
S1 else S2
|
- if (E < (E1 = E2))
+ E1 = E2;
+ if (E < E1)
S1
/* lesser than or equal to */
|
- if (E <= (E1 = E2))
+ E1 = E2;
+ if (E <= E1)
S1 else S2
|
- if (E <= (E1 = E2))
+ E1 = E2;
+ if (E <= E1)
S1
/* greater than or equal to */
|
- if (E >= (E1 = E2))
+ E1 = E2;
+ if (E >= E1)
S1 else S2
|
- if (E >= (E1 = E2))
+ E1 = E2;
+ if (E >= E1)
S1
)
/* This rule is for compound statements where the assignment is on the left.*/
@left@
expression E, E1, E2;
statement S1, S2;
@@
(
/* and */
- if ((E1 = E2) && E)
+ E1 = E2;
+ if (E1 && E)
S1 else S2
|
- if ((E1 = E2) && E)
+ E1 = E2;
+ if (E1 && E)
S1
|
/* or */
- if ((E1 = E2) || E)
+ E1 = E2;
+ if (E1 || E)
S1
|
- if ((E1 = E2) || E)
+ E1 = E2;
+ if (E1 || E)
S1 else S2
|
/* not equal */
- if ((E1 = E2) != E)
+ E1 = E2;
+ if (E1 != E)
S1
|
- if ((E1 = E2) != E)
+ E1 = E2;
+ if (E1 != E)
S1 else S2
|
Stable kernels will need patches
staging: vt6656: s_nsInterruptUsbIoCompleteRead remove usb_fill_bulk_urb
staging: vt6656: PIPEnsInterruptRead use usb_fill_int_urb
Jérôme Pinot [Thu, 13 Mar 2014 15:44:30 +0000 (00:44 +0900)]
staging/ozwpan: coding style ether_addr_copy
This fixes the following issues detected by checkpatch.pl:
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)
#220: FILE: drivers/staging/ozwpan/ozcdev.c:220:
+ memcpy(g_cdev.active_addr, addr, ETH_ALEN);
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)
#286: FILE: drivers/staging/ozwpan/ozcdev.c:286:
+ memcpy(addr, g_cdev.active_addr, ETH_ALEN);
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)
#176: FILE: drivers/staging/ozwpan/ozpd.c:176:
+ memcpy(pd->mac_addr, mac_addr, ETH_ALEN);
Ken Cox [Thu, 13 Mar 2014 20:39:19 +0000 (15:39 -0500)]
Staging: unisys: Clean multiple sparse warnings
Cleaned up multiple sparse warnings, mostly due to improper access of I/O
space. Also declared functions and variables that were only used locally
as static.
Removed ULTRA_disp_channel_header(), ULTRA_disp_channel(),
ULTRA_disp_vnic_channel() because they were never called.
Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Tue, 11 Mar 2014 03:19:06 +0000 (12:19 +0900)]
staging: dgnc: replace unnecessary while() with if()
It doesn't need to use while loop for getting newrate,
because it always breaks out the end of while loop with
"break". So just replace while with if.
And the type of newrate is "unsigned int", this type
is never less than zero. If it can be set to negative value by
user application with ioctl(), it is not zero but it
can be a unexpected value for setting custom baudrate.
Also smatch says:
drivers/staging/dgnc/dgnc_tty.c:967 dgnc_set_custom_speed() warn:
unsigned 'newrate' is never less than zero.
drivers/staging/dgnc/dgnc_tty.c:981 dgnc_set_custom_speed() info:
ignoring unreachable code.
Mark Hounschell [Wed, 12 Mar 2014 16:50:53 +0000 (12:50 -0400)]
staging: dgap: remove unneeded dgap_driver_states
The only driver states we need now is READY or !READY.
No need for a sysfs method of seeing those 2 states so
the sysfs entries for dgap_driver_state is also removed.
Signed-off-by: Mark Hounschell <markh@compro.net> Tested-by: Mark Hounschell <markh@compro.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gary Rookard [Tue, 11 Mar 2014 03:24:29 +0000 (23:24 -0400)]
Staging: lustre: fld: fix split strings.
unsplit strings from two lines to one. Changes resulted
in line over 80 characters warning. Leaving the latter
of the two warnings for possible string grepping reasons.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It initializes an analog input subdevice that only has a (*cancel)
function. It also does a request_irq() to hookup an interrupt handler
using it->options[0] as the IRQ. This option is actually the base
address of the I/O region used by the board. If the interrupt handler
actually did get hooked up, the rest of the code assumes that IRQ 10
is being used.
Rewrite the driver to properly support the hardware.
The DAS6402-12/16 boards have 64 single-ended / 32 differential analog
inputs, 2 analog outputs, 8 digital inputs, and 8 digital outputs. Add
proper support for these subdevices.
Stub in the analog input async command support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define is only used in the attach to specify the I/O region size
passed to comedi_request_region(). Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: gsc_hpdi: tidy up the register map
For aesthetics, convert the various enums into simple defines to
describe the register map for the board. Group the bit defines with
the associated register define. Convert the helper functions for
the register bit/shift/mask stuff into simple defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helper function is used to OR bits with a software copy of a
register value then writel() the new value to the register. The
software copies are never updated in the driver so they are always
0 due to the kzalloc.
Remove the unnecessary 'bits' from the private data and replace
the hpdi_writel() calls with writel().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: gsc_hpdi: tidy up hpdi_cmd_test()
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
interrupt support code.
Absorb the di_cmd_test() helper and tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
interrupt support code.
Absorb the di_cmd() helper and tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: gsc_hpdi: tidy up setup_dma_descriptors()
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
async command support code.
Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: gsc_hpdi: tidy up dio_config_insn()
For aesthetics, rename this function so it has namespace associated
with the driver and move it so that it is not in the middle of the
async command support code.
Absorb the dio_config_block_size() helper function and remove the
forward declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is only called by the (*auto_attach). Absorb it into that
function to clarify the attach and remove the need for some of the forward
declarations.
For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define is only used in the comedi_request_region() call to specify
the size of the I/O region to request. Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 13 Mar 2014 15:30:39 +0000 (15:30 +0000)]
staging: comedi: 8255_pci: initialize MITE data window
According to National Instruments' PCI-DIO-96/PXI-6508/PCI-6503 User
Manual, the physical address in PCI BAR1 needs to be OR'ed with 0x80 and
written to register offset 0xC0 in the "MITE" registers (BAR0). Do so
during initialization of the National Instruments boards handled by the
"8255_pci" driver. The boards were previously handled by the
"ni_pcidio" driver, where the initialization was done by `mite_setup()`
in the "mite" module. The "mite" module comes with too much extra
baggage for the "8255_pci" driver to deal with so use a local, simpler
initialization function.
staging: comedi: dac02: introduce comedi driver for DAC02 boards
This board is currently supported by the poc driver. That driver used
to support a number of simple boards but now only provides support for
the DAC02 board.
Introduce a new comedi driver specifically for the DAC02 board. This
allows cleaning up all the cruft.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: c6xdigio: add readback of last pwm channel values
Add and (*insn_read) for the PWM subdevice to allow reading back the
last value written to the channels.
There are only 2 PWM channels and they have a maxdata of 500. Pack
the last values in the subdevice 'state' instead of adding a private
data struct to this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 24-bit encoder value is read using 3-bits in the status register. The
data register is banged between each read of the status register to advance
the bits.
Introduce a helper function to handle this and remove the union encvaluetype
and struct encbitsbyte.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log