Jani Nikula [Tue, 27 Aug 2013 12:12:22 +0000 (15:12 +0300)]
drm/i915: fix PLL assertions for DSI PLL
For DSI, we need to be asserting DSI PLL, not DPLL.
This is a somewhat stopgap implementation. It's slightly ugly to have to
pass the dsi parameter to intel_enable_pipe().
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ymohanma [Tue, 27 Aug 2013 20:40:56 +0000 (23:40 +0300)]
drm/i915: add VLV DSI PLL Calculations
v2:
- Grab dpio_lock mutex in vlv_enable_dsi_pll().
- Add and call vlv_disable_dsi_pll().
v3: Mostly based on Ville's review comments.
- Only pipe A has DSI PLL lock bit.
- Add more of CCK REG bit definitions for DSI PLL.
- Make tables static.
- Move clock gating out of the clock calculation functions.
- DSI PLL LDO power gating.
- Put alternative MNP from table calc behind #ifdef.
v4: s/CKK/CLK/ in the CCK REG bit definitions (Ville).
Signed-off-by: ymohanma <yogesh.mohan.marimuthu@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:20 +0000 (15:12 +0300)]
drm/i915: add basic MIPI DSI output support
This does not include any panel specific sub-encoders yet.
v2: Fix fixed mode handling (Daniel)
v3: Mostly based on Ville's review comments.
- Fix MIPI_HS_TX_TIMEOUT.
- DPI_ENABLE only for video mode.
- Drop ULPS usage for now, use DEVICE_READY only.
- Set MIPI_INIT_COUNT based on txclkesc.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:19 +0000 (15:12 +0300)]
drm/i915: add MIPI DSI command sending routines
v2: Rebase due to register bit definition change.
v3: Mostly based on Ville's review comments.
- Use size_t for length all around.
- Reuse dsi_vc_send_short in dsi_vc_send_long.
- Remove stale/incorrect comments.
- Reverse special packet sent interrupt check.
- Use DSI controller regs for reading, not adapter.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:18 +0000 (15:12 +0300)]
drm/i915: add structs for MIPI DSI output
The sub-encoder model is copied from DVO.
v2: Add attached_connector to struct intel_dsi.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:16 +0000 (15:12 +0300)]
drm/i915: add MIPI DSI register definitions
Add definitions for VLV MIPI DSI registers.
v2: Small fixes per Ville's review comments.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 27 Aug 2013 12:12:15 +0000 (15:12 +0300)]
drm/i915: add VLV pipeconf bit definition for DSI PLL lock
v2: Add comment this is pipe A only (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shobhit Kumar [Tue, 27 Aug 2013 12:12:13 +0000 (15:12 +0300)]
drm: add MIPI DSI encoder and connector types
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:51:00 +0000 (19:51 -0300)]
drm/i915: Always prefer CPU relocations with LLC
A follow-on to the update of the LLC coherency logic is that we can rely
on the LLC being coherent with the CS for rewriting batchbuffers
irrespective of their cache domain. (This should have no effect
currently as all the batch buffers are expected to be I915_CACHE_LLC and
so using the cpu relocation path anyway.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 26 Aug 2013 09:23:47 +0000 (11:23 +0200)]
drm/i915: More vma fixups around unbind/destroy
The important bugfix here is that we must not unlink the vma when
we keep it around as a placeholder for the execbuf code. Since then we
won't find it again when execbuf gets interrupt and restarted and
create a 2nd vma. And since the code as-is isn't fit yet to deal with
more than one vma, hilarity ensues.
Specifically the dma map/unmap of the sg table isn't adjusted for
multiple vmas yet and will blow up like this:
As a consequence we need to change the "only one vma for now" check in
vma_unbind - since vma_destroy isn't always called the obj->vma_list
might not be empty. Instead check that the vma list is singular at the
beginning of vma_unbind. This is also more symmetric with bind_to_vm.
This fixes the igt/gem_evict_everything|alignment testcases.
v2:
- Add a paranoid WARN to mark_free in the eviction code to make sure
we never try to evict a vma used by the execbuf code right now.
- Move the check for a temporary execbuf vma into vma_destroy -
otherwise the failure path cleanup in bind_to_vm will blow up.
drm/i915: Don't destroy the vma placeholder during execbuffer reservation
Squash with this when merging!
v3: Improvements suggested in Chris' review:
- Move the WARN_ON in vma_destroy that checks for vmas with an drm_mm
allocation before the early return.
- Bail out if we hit the WARN in mark_free to hopefully make the
kernel survive for long enough to capture it.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68298
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68171 Tested-by: lu hua <huax.lu@intel.com> (v2) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 20 Aug 2013 11:56:40 +0000 (12:56 +0100)]
drm/i915: Don't destroy the vma placeholder during execbuffer reservation
The execbuffer handle and exec_link were moved from the object into the
vma. As the vma may be unbound and destroyed whilst attempting to
reserve the execbuffer objects (either through a forced unbind to fix up
a misalignment or through an evict-everything call) we need to prevent
the free of the i915_vma itself. Otherwise not only is the list of
objects to reserve corrupt, but we continue to reference stale vma
entries.
Fixes kernel crash with i-g-t/gem_evict_everything
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
References: http://www.spinics.net/lists/intel-gfx/msg32038.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68298 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 14 Aug 2013 12:14:04 +0000 (14:14 +0200)]
drm/i915: inline vma_create into lookup_or_create_vma
In the execbuf code we don't clean up any vmas which ended up not
getting bound for code simplicity. To make sure that we don't end up
creating multiple vma for the same vm kill the somewhat dangerous
vma_create function and inline it into lookup_or_create.
This is just a safety measure to prevent surprises in the future.
Also update the somewhat confused comment in the execbuf code and
clarify what kind of magic is going on with a new one.
v2: Keep the function separate as requested by Chris. But give it a __
prefix for paranoia and move it tighter together with the other vma
stuff.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 14 Aug 2013 09:38:36 +0000 (11:38 +0200)]
drm/i915: Convert execbuf code to use vmas
In order to transition more of our code over to using a VMA instead of
an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up
until now, we've only had a VMA when actually binding an object.
The previous patch helped handle the distinction on bound vs. unbound.
This patch will help us catch leaks, and other issues before we actually
shuffle a bunch of stuff around.
This attempts to convert all the execbuf code to speak in vmas. Since
the execbuf code is very self contained it was a nice isolated
conversion.
The meat of the code is about turning eb_objects into eb_vma, and then
wiring up the rest of the code to use vmas instead of obj, vm pairs.
Unfortunately, to do this, we must move the exec_list link from the obj
structure. This list is reused in the eviction code, so we must also
modify the eviction code to make this work.
WARNING: This patch makes an already hotly profiled path slower. The cost is
unavoidable. In reply to this mail, I will attach the extra data.
v2: Release table lock early, and two a 2 phase vma lookup to avoid
having to use a GFP_ATOMIC. (Chris)
v3: s/obj_exec_list/obj_exec_link/
Updates to address
commit 6d2b888569d366beb4be72cacfde41adee2c25e1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Aug 7 18:30:54 2013 +0100
drm/i915: List objects allocated from stolen memory in debugfs
v4: Use obj = vma->obj for neatness in some places (Chris)
need_reloc_mappable() should return false if ppgtt (Chris)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Split out prep patches. Also remove a FIXME comment which is
now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 3 Sep 2013 18:40:37 +0000 (20:40 +0200)]
drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
The dpll actually runs at the port clock so we don't need
to multiply it again with the pixel multiplier to get the
adjusted_mode.clock. This is in contrast to the ironlake
pixel clock readout code which uses the fdi dotclock: That
one does _not_ run with multiplied pixels.
This issue goes back to the original clock readout code added
in
Daniel Vetter [Tue, 3 Sep 2013 18:40:36 +0000 (20:40 +0200)]
drm/i915: handle sdvo input pixel multiplier correctly again
The sdvo input timing needs to be the actual mode, the sdvo
encoder automatically adjusts for the need of pixel doubling or
quadrupling. This was lost in pipe config conversion of the
pixel multiplier in
Daniel Vetter [Mon, 2 Sep 2013 14:22:25 +0000 (16:22 +0200)]
drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
Historically we've run our own driver hotplug handling in our own
work-queue, which then launched the drm core hotplug handling in the
system workqueue. This is important since we flush our own driver
workqueue in the pageflip code while hodling modeset locks, and only
the drm hotplug code grabbed these locks. But with
this was changed and now we could deadlock in our flip handler if
there's a hotplug work blocking the progress of the crucial unpin
works. So this broke the careful deadlock avoidance implemented in
drm/i915: Flush outstanding unpin tasks before pageflipping
Since the rule thus far has been that work items on our own workqueue
may never grab modeset locks simply restore that rule again.
v2: Add a comment to the declaration of dev_priv->wq to warn readers
about the tricky implications of using it. Suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Stuart Abercrombie <sabercrombie@chromium.org> Reported-by: Stuart Abercrombie <sabercrombie@chromium.org>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/26239 Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in a comment at the place where we schedule the work.
Requested after-the-fact by Chris on irc since the hpd work isn't the
only place we botch this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 2 Sep 2013 18:13:39 +0000 (21:13 +0300)]
drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
intel_fixed_panel_mode() overwrote the adjusted_mode with the fixed mode
only partially. Notably it forgot to copy over the sync flags. The LVDS code however programmed the hardware with the sync flags from fixed mode, and then later the pipe config comparison obviously failed as we
filled out the adjusted_mode in get_config from the real registers.
Just call drm_mode_copy() in intel_fixed_panel_mode() to copy over the
whole thing, and then just use adjusted_mode in the LVDS code to figure
out which sync settings the hardware needs.
Also constify the fixed_mode argument to intel_fixed_panel_mode().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 30 Aug 2013 14:39:26 +0000 (15:39 +0100)]
drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
One needs to call __sg_free_table() if __sg_alloc_table() fails, but
sg_alloc_table() does that for us already.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewd-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Williamson [Wed, 28 Aug 2013 15:39:08 +0000 (09:39 -0600)]
i915: Update VGA arbiter support for newer devices
This is intended to add VGA arbiter support for Intel HD graphics on
Core processors. The old GMCH registers no longer exist, so even
though it appears that i915 participates in VGA arbitration, it doesn't
work. On Intel HD graphics we already attempt to disable VGA regions
of the device. This makes registering as a VGA client unnecessary since
we don't intend to operate differently depending on how many VGA devices
are present. We can disable VGA memory regions by clearing the memory
enable bit in the VGA MSR. That only leaves VGA IO, which we update
the VGA arbiter to know that we don't participate in VGA memory
arbitration. We also add a hook on unload to re-enable memory and
reinstate VGA memory arbitration.
v3: Use explicit LEGACY_IO | LEGACY_MEM when restoring rather than
LEGACY_MASK, per Ville's comments.
v2: I915_READ/WRITE accessors don't work in i915_disable_vga, use inb/outb
directly. Also, on the driver unbind VGA enable path, acquire legacy
IO to re-enable VGA memory. Correct comment.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add patch changelog. Also squash in a fixup to have a dummy
static inline for vga_set_legacy_decoding for CONFIG_VGA_ARB=n as
reported by the 0-day kernel build bot.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
fixup 2
Alex Williamson [Thu, 15 Aug 2013 22:37:59 +0000 (16:37 -0600)]
vgaarb: Fix VGA decodes changes
When VGA decodes change we need to do a bit more evaluation of exactly what
has changed. We don't necessarily give up all the old owns resources and
we need to account for resources with locks. The new algorithm is: If
something is added, update decodes. If legacy resources were added and
none were there before, we have a new participant. If something is
removed, update decodes. If we previously owned it, we no longer own it.
If it was previously locked, invalidate all locks and release it. If
legacy resources were removed and none are left, remove the participant
from VGA arbitration.
Previously we updated decodes, released ownership of everything that was
previously decoded, ignored all locks, and went off looking for another
device to transfer VGA to. In a test case where Intel IGD removes only
legacy VGA memory decoding, this left the arbiter switching to discrete
graphics without actually disabling legacy VGA IO from the IGD. As a
bonus, we bumped up the count of VGA arbitration participants for no
good reason.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Kill now unused variables, reported by the 0-day kernel
builtbot.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Williamson [Thu, 15 Aug 2013 22:37:53 +0000 (16:37 -0600)]
vgaarb: Don't disable resources that are not owned
If a device does not own a resource then we don't need to disable it.
This resolves the case where an Intel IGD device can be configured to
disable decode of VGA memory but we still need the arbiter to handle
VGA I/O port routing. When the IGD device is in conflict, only
PCI_COMMAND_IO should be disabled since VGA memory does not require
arbitration on this device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:50:55 +0000 (19:50 -0300)]
drm/i915: Pin pages whilst mapping the dma-buf
As we attempt to kmalloc after calling get_pages, there is a possibility
that the shrinker may reap the pages we just acquired. To prevent this
we need to increment the pages_pin_count early, so rearrange the code
and error paths to make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 23 Aug 2013 22:51:28 +0000 (19:51 -0300)]
drm/i915: enable trickle feed on Haswell
We shouldn't disable the trickle feed bits on Haswell. Our
documentation explicitly says the trickle feed bits of PRI_CTL and
CUR_CTL should not be programmed to 1, and the hardware engineer also
asked us to not program the SPR_CTL field to 1. Leaving the bits as 1
could cause underflows.
Reported-by: Arthur Runyan <arthur.j.runyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
x86: add early quirk for reserving Intel graphics stolen memory v5
Systems with Intel graphics controllers set aside memory exclusively for
gfx driver use. This memory is not always marked in the E820 as
reserved or as RAM, and so is subject to overlap from E820 manipulation
later in the boot process. On some systems, MMIO space is allocated on
top, despite the efforts of the "RAM buffer" approach, which simply
rounds memory boundaries up to 64M to try to catch space that may decode
as RAM and so is not suitable for MMIO.
v2: use read_pci_config for 32 bit reads instead of adding a new one
(Chris)
add gen6 stolen size function (Chris)
v3: use a function pointer (Chris)
drop gen2 bits (Daniel)
v4: call e820_sanitize_map after adding the region
v5: fixup comments (Peter)
simplify loop (Chris)
Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: H. Peter Anvin <hpa@zytor.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66726
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66844 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For use by userspace (at some point in the future) and other kernel code.
v2: move PCI IDs to uabi (Chris)
move PCI IDs to drm/ (Dave)
v3: fixup Quanta detection - needs to come first (Daniel)
v4: fix up PCI match structure init for easier use by userspace (Chris)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 19:58:12 +0000 (20:58 +0100)]
drm/i915: Use RCS flips on Ivybridge+
RCS flips do work on Iybridge+ so long as we can unmask the messages
through DERRMR. However, there are quite a few workarounds mentioned
regarding unmasking more than one event or triggering more than one
message through DERRMR. Those workarounds in principle prevent us from
performing pipelined flips (and asynchronous flips across multiple
planes) and equally apply to the "known good" BCS ring. Given that it
already appears to work, and also appears to work with unmasking all 3
planes at once (and queuing flips across multiple planes), be brave.
Bugzlla: https://bugs.freedesktop.org/show_bug.cgi?id=67600 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Lightly-tested-by: Stephane Marchesin <marchesin@icps.u-strasbg.fr> Cc: Stephane Marchesin <marchesin@icps.u-strasbg.fr> Cc: Ben Widawsky <ben@bwidawsk.net> Tested-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 19:58:11 +0000 (20:58 +0100)]
drm/i915: Embed the ring->private within the struct intel_ring_buffer
We now have more devices using ring->private than not, and they all want
the same structure. Worse, I would like to use a scratch page from
outside of intel_ringbuffer.c and so for convenience would like to reuse
ring->private. Embed the object into the struct intel_ringbuffer so that
we can keep the code clean.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 27 Aug 2013 09:24:09 +0000 (12:24 +0300)]
drm/i915: fix lvds/dp panel fitter setting
If need to enable the panel fitter, the crtc timings have to be
programmed according to the panel's native (fixed) mode. This isn't the
case atm, since after the encoder changes adjusted_mode to fixed
mode the crtc_* timing fields of adjusted_mode will stay at their original
non-native values that the user passed in. This results in a corrupted
output.
One exception is when we have a second pass of computing encoder configs
due to bandwidth limitation, since then we'll set adjusted_mode.crtc_*
fields to the fixed mode values set in the first pass; so in this case
things will work out.
Fix this by updating the adjusted_mode.crtc_* fields when we set the
fixed panel mode.
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 28 Aug 2013 08:57:59 +0000 (10:57 +0200)]
drm/i915: tune down hangcheck noise
We already have a big splashing *ERROR* for all the relevant cases of
hangs, so this one here is redudant. And it results in an unclean
dmesg when running with simulated hangs. Regression has been
introduced in
drm/i915: detect hang using per ring hangcheck_score
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68641 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:51:01 +0000 (19:51 -0300)]
drm/i915: Report requested frequency alongside current frequency in debugfs
It can be useful to compare at times the current vs requested frequency
of the GPU, so provide the contents of RPNSWREQ alonside CAGF.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 22:51:06 +0000 (19:51 -0300)]
drm/i915: Apply the force-detect VGA w/a to Valleyview
It appears that Valleyview shares its VGA encoder with more recent
siblings and requires the same forced detection cycle after a hardware
reset before we can rely on hotplugging.
Reported-and-tested-by: kobeqin <kobe.qin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67733 Tested-by: kobeqin <kobe.qin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Check for gen >= 5 insted, acked by Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 26 Aug 2013 15:18:54 +0000 (16:18 +0100)]
drm/i915: Adjust available RPS information through sysfs for vlv
Valleyview has its own render power state implementation with different
capability knobs - it has no RP0,RP1,RPn but rather RPe.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67734 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: kobe.qin@intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 23 Aug 2013 13:52:30 +0000 (16:52 +0300)]
drm/i915: sanitize forcewake registers on reset
In reset we try to restore the forcewake state to
pre reset state, using forcewake_count. The reset
doesn't seem to clear the forcewake bits so we
get warn on forcewake ack register not clearing.
Use same mechanism as intel_uncore_sanitize() does
when loading driver to reset the forcewake bits, right
after the chip has been reset.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 22 Aug 2013 18:09:00 +0000 (21:09 +0300)]
drm/i915: Don't mask EI UP interrupt on IVB|SNB
Submitting a batchbuffer which simulates a gpu
hang by doing MI_BATCH_BUFFER_START into itself,
to test hangcheck, started to hard hang the whole box
(IVB). Bisecting lead to this commit:
Experimenting with the mask register showed that
unmasking EI UP will prevent the hard hang in IVB and SNB.
HSW doesn't hang with EI UP masked.
Considering we are just disabling interrupts that aren't even
delivered to driver, this change is more likely to paper over some
weirdness in gpu's internal state machine. But until better
explanation can be found, let's trade little bit of power
for stability on these architectures.
v2: - Unmask EI_EXPIRED directly in I915_WRITE (Vinit)
v3: - Only unmask on SNB and IVB
Cc: Vinit Azad <vinit.azad@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Acked-by: Vinit Azad <vinit.azad@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Christian König [Sun, 25 Aug 2013 16:29:03 +0000 (18:29 +0200)]
drm/radeon: support render nodes
Enable support for drm render nodes for radeon by flagging the ioctls that
are safe and just needed for rendering.
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Martin Peres [Sun, 25 Aug 2013 16:29:02 +0000 (18:29 +0200)]
drm/nouveau: Support render nodes
Enable support for drm render nodes for nouveau by flagging the ioctls that
are safe and just needed for rendering.
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Enable support for drm render nodes for i915 by flagging the ioctls that
are safe and just needed for rendering.
v2: mark reg_read, set_caching and get_caching (ickle, danvet)
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
David Herrmann [Mon, 26 Aug 2013 13:16:49 +0000 (15:16 +0200)]
drm: fix DRM_IOCTL_MODE_GETFB handle-leak
DRM_IOCTL_MODE_GETFB is used to retrieve information about a given
framebuffer ID. It is a read-only helper and was thus declassified for
unprivileged access in:
drm: remove master fd restriction on mode setting getters
However, alongside width, height and stride information,
DRM_IOCTL_MODE_GETFB also passes back a handle to the underlying buffer of
the framebuffer. This handle allows users to mmap() it and read or write
into it. Obviously, this should be restricted to DRM-Master.
With the current setup, *any* process with access to /dev/dri/card0 (which
means any process with access to hardware-accelerated rendering) can
access the current screen framebuffer and modify it ad libitum.
For backwards-compatibility reasons we want to keep the
DRM_IOCTL_MODE_GETFB call unprivileged. Besides, it provides quite useful
information regarding screen setup. So we simply test whether the caller
is the current DRM-Master and if not, we return 0 as handle, which is
always invalid. A following DRM_IOCTL_GEM_CLOSE on this handle will fail
with EINVAL, but we accept this. Users shouldn't test for errors during
GEM_CLOSE, anyway. And it is still better as a failing MODE_GETFB call.
v2: add capable(CAP_SYS_ADMIN) check for compatibility with i-g-t
Cc: <stable@vger.kernel.org> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
Rob Clark [Fri, 30 Aug 2013 17:02:15 +0000 (13:02 -0400)]
drm/msm: convert to drm_bridge
Drop the msm_connector base class, and special calls to base class
methods from the encoder, and use instead drm_bridge. This allows for a
cleaner division between the hdmi (and in future dsi) blocks, from the
mdp block.
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Sean Paul [Wed, 14 Aug 2013 20:47:37 +0000 (16:47 -0400)]
drm: Add drm_bridge
This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).
Signed-off-by: Sean Paul <seanpaul@chromium.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 1 Sep 2013 23:31:40 +0000 (09:31 +1000)]
Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-next
Alex writes:
This is the radeon drm-next request. Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes
[airlied: fix up a bunch of conflicts from drm_order removal]
* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
drm/radeon/dpm: make sure dc performance level limits are valid (CI)
drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
drm/radeon: gcc fixes for extended dpm tables
drm/radeon: gcc fixes for kb/kv dpm
drm/radeon: gcc fixes for ci dpm
drm/radeon: gcc fixes for si dpm
drm/radeon: gcc fixes for ni dpm
drm/radeon: gcc fixes for trinity dpm
drm/radeon: gcc fixes for sumo dpm
drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
drm/radeon: gcc fixes for rv6xx dpm
drm/radeon: gcc fixes for radeon_atombios.c
drm/radeon: enable UVD interrupts on CIK
drm/radeon: fix init ordering for r600+
drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
drm/radeon/audio: set up the sads on DCE3.2 asics
drm/radeon: fix handling of variable sized arrays for router objects
...
Alex Deucher [Fri, 30 Aug 2013 20:24:33 +0000 (16:24 -0400)]
drm/radeon/dpm: make sure dc performance level limits are valid (CI)
Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table. In that case just
use the ac limits. This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.
Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 30 Aug 2013 20:18:35 +0000 (16:18 -0400)]
drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table. In that case just
use the ac limits. This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.
Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708
v2: fix up limits in dpm_init()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Fri, 23 Aug 2013 19:28:42 +0000 (15:28 -0400)]
drm/radeon: gcc fixes for extended dpm tables
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 23:09:54 +0000 (19:09 -0400)]
drm/radeon: gcc fixes for kb/kv dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 23:08:22 +0000 (19:08 -0400)]
drm/radeon: gcc fixes for ci dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 23:06:54 +0000 (19:06 -0400)]
drm/radeon: gcc fixes for si dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 23:04:02 +0000 (19:04 -0400)]
drm/radeon: gcc fixes for ni dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 23:02:14 +0000 (19:02 -0400)]
drm/radeon: gcc fixes for trinity dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 22:59:41 +0000 (18:59 -0400)]
drm/radeon: gcc fixes for sumo dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 22:51:08 +0000 (18:51 -0400)]
drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 22:47:07 +0000 (18:47 -0400)]
drm/radeon: gcc fixes for rv6xx dpm
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 20 Aug 2013 22:40:46 +0000 (18:40 -0400)]
drm/radeon: gcc fixes for radeon_atombios.c
Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs. Rather than indexing the arrays, use
pointer arithmetic.
See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 30 Aug 2013 09:10:33 +0000 (11:10 +0200)]
drm/radeon: enable UVD interrupts on CIK
The same as on evergreen.
Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: FrankR Huang <FrankR.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Fri, 30 Aug 2013 12:58:20 +0000 (08:58 -0400)]
drm/radeon: fix init ordering for r600+
The vram scratch buffer needs to be initialized
before the mc is programmed otherwise we program
0 as the GPU address of the default GPU fault
page. In most cases we put vram at zero anyway and
reserve a page for the legacy vga buffer so in practice
this shouldn't cause any problems, but better to make
it correct.
Alex Deucher [Wed, 28 Aug 2013 22:12:59 +0000 (18:12 -0400)]
drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
For powergating, we just need to re-init the registers, there
is no need to restore the uvd BOs. This just adds needless
work when powergating uvd for playback while the system is
on. We only need to restore the uvd BOs on an actual resume
from suspend or when the driver loads.
This fixes multi-stream UVD playback on KB systems.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
Commit a01c34f72e7cd2624570818f579b5ab464f93de2 (radeon kms: do not
flush uninitialized hotplug work) moved work initialisation phase to
the last step of radeon_irq_kms_init(). Meelis Roos reported that this
causes problems on his machine because drm_irq_install() uses hotplug
work on r100.
hotplug work flushed in radeon_irq_kms_fini(), with two possible cases:
-- radeon_irq_kms_fini() call after successful radeon_irq_kms_init()
-- radeon_irq_kms_fini() call after unsuccessful (or not called at all)
radeon_irq_kms_init()
The latter one causes flush work on uninitialised hotplug work. Move
work initialisation before drm_irq_install(), but keep existing agreement
to flush hotplug work in radeon_irq_kms_fini() only for `irq.installed'
(successful radeon_irq_kms_init()) case.
Alex Deucher [Tue, 27 Aug 2013 16:36:01 +0000 (12:36 -0400)]
drm/radeon: fix handling of variable sized arrays for router objects
The table has the following format:
typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure
{
UCHAR ucNumberOfSrc;
USHORT usSrcObjectID[1];
UCHAR ucNumberOfDst;
USHORT usDstObjectID[1];
}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
usSrcObjectID[] and usDstObjectID[] are variably sized, so we
can't access them directly. Use pointers and update the offset
appropriately when accessing the Dst members.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Mon, 26 Aug 2013 21:52:12 +0000 (17:52 -0400)]
drm/radeon: fix resume on some rs4xx boards (v2)
Setting MC_MISC_CNTL.GART_INDEX_REG_EN causes hangs on
some boards on resume. The systems seem to work fine
without touching this bit so leave it as is.
v2: read-modify-write the GART_INDEX_REG_EN bit.
I suspect the problem is that we are losing the other
settings in the register.
Reported-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Daniel Tobias <dan.g.tob@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Wed, 21 Aug 2013 18:44:15 +0000 (14:44 -0400)]
drm/radeon: disable the GRPH block when we disable the crtc
Since we aren't using it when the crtc is disabled, turn it off
to save power. The GRPH block is the part of the display
controller that controls the primary graphics plane (size,
address, etc.).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 19 Aug 2013 15:39:27 +0000 (11:39 -0400)]
drm/radeon: update line buffer allocation for dce8
We need to allocate line buffer to each display when
setting up the watermarks. Failure to do so can lead
to a blank screen. This fixes blank screen problems
on dce8 asics.
Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Mon, 19 Aug 2013 15:15:43 +0000 (11:15 -0400)]
drm/radeon: update line buffer allocation for dce6
We need to allocate line buffer to each display when
setting up the watermarks. Failure to do so can lead
to a blank screen. This fixes blank screen problems
on dce6 asics.
Alex Deucher [Mon, 19 Aug 2013 15:06:50 +0000 (11:06 -0400)]
drm/radeon: update line buffer allocation for dce4.1/5
We need to allocate line buffer to each display when
setting up the watermarks. Failure to do so can lead
to a blank screen. This fixes blank screen problems
on dce4.1/5 asics.
Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Tom Stellard [Fri, 16 Aug 2013 21:47:39 +0000 (17:47 -0400)]
drm/radeon/si: Add support for CP DMA to CS checker for compute v2
Also add a new RADEON_INFO query to check that CP DMA packets are
supported on the compute ring.
CP DMA has been supported since the 3.8 kernel, but due to an oversight
we forgot to teach the CS checker that the CP DMA packet was legal for
the compute ring on Southern Islands GPUs.
This patch fixes a bug where the radeon driver will incorrectly reject a legal
CP DMA packet from user space. I would like to have the patch
backported to stable so that we don't have to require Mesa users to use a
bleeding edge kernel in order to take advantage of this feature which
is already present in the stable kernels (3.8 and newer).
v2:
- Don't bump kms version, so this patch can be backported to stable
kernels.
Cc: stable@vger.kernel.org Signed-off-by: Tom Stellard <thomas.stellard@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Aug 2013 22:58:43 +0000 (18:58 -0400)]
drm/radeon: enable mgcg on CIK
Now that the CP is no longer reset and cg is properly
disabled in when appropriate in the dpm code we can
now enable mgcg (medium grained clockgating).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 22 Aug 2013 15:57:46 +0000 (11:57 -0400)]
drm/radeon/cik: properly set up the clearstate buffer for pg (v2)
The format of the clearstate buffer used for pg (powergating)
changed between NI and SI. This formats it properly for what
the hardware expects on SI+.
v2: fix addresses
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 12 Aug 2013 21:25:26 +0000 (17:25 -0400)]
drm/radeon: fixes for gfx clockgating on CIK
Clockgating requires signalling between the CP and the
RLC to work properly. Resetting the CP block in the
CP resume code messed up the internal coordination
between the blocks. Removing the reset allows gfx
clockgating to work properly. However, when gfx clock
gating is enabled, there is a strange interaction with
dpm which causes the chip to stay in the high performance
level all the time, so leave gfx clockgating disabled
for now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 9 Aug 2013 15:18:39 +0000 (11:18 -0400)]
drm/radeon: restructure cg/pg on cik (v2)
- use new cg/pg flags for finer grained clock and
powergating control
- restructure the cg/pg code so it can be called from
other components such as dpm
v2: fix build breakage from rebase
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 14 Aug 2013 22:53:56 +0000 (18:53 -0400)]
drm/radeon: enable mgcg on SI
Now that the CP is no longer reset and cg is properly
disabled in when appropriate in the dpm code we can
now enable mgcg (medium grained clockgating).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 15 Aug 2013 20:20:26 +0000 (16:20 -0400)]
drm/radeon: fixes for gfx clockgating on SI
Clockgating requires signalling between the CP and the
RLC to work properly. Resetting the CP block in the
CP resume code messed up the internal coordination
between the blocks. Removing the reset allows gfx
clockgating to work properly. However, when gfx clock
gating is enabled, there is a strange interaction with
dpm which causes the chip to stay in the high performance
level all the time, so leave gfx clockgating disabled
for now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Aug 2013 20:31:25 +0000 (16:31 -0400)]
drm/radeon: add cg and pg flags
This commits adds flags for supported clockgating and
powergating features. This allows us to more easily
track which features are supported on a particular
asic and to enable/disable features for debugging.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / linux-beck.git / log