The RPF source memory pointers need to be offset to take the crop
rectangle into account. Offsets are computed in the RPF stream start,
which can happen (when using the DRM pipeline) after calling the RPF
.set_memory() operation that programs the buffer addresses.
The .set_memory() operation tries to guard against the problem by
skipping programming of the registers when the module isn't streaming.
This will however only protect the first use of an RPF in a DRM
pipeline, as in all subsequent uses the module streaming flag will be
set and the .set_memory() operation will use potentially incorrect
offsets.
Fix this by allowing the caller to decide whether to program the
hardware immediately or just cache the addresses. While at it refactor
the memory set code and create a new vsp1_rwpf_set_memory() that cache
addresses and calls the .set_memory() operation to apply them to the
hardware.
As a side effect the driver now writes all three DMA address registers
regardless of the number of planes, and initializes unused addresses to
zero.
[media] v4l: vsp1: Enable display list support for the HS[IT], LUT, SRU and UDS
Those modules were left out of display list integration as they're not
used by the DRM pipeline. To prepare for display list support in non-DRM
pipelines use the module write API to set registers.
[media] v4l: vsp1: sru: Don't program intensity in control set handler
The datasheet clearly states that all but a few registers can't be
modified when the device is running. Programming the intensity
parameters in the control set handler is thus prohibited. Program it
when starting the module instead.
This requires storing the intensity value internally as the module can
be started from the frame completion interrupt handler, and accessing
control values requires taking a mutex.
[media] v4l: vsp1: rwpf: Don't program alpha value in control set handler
The datasheet clearly states that all but a few registers can't be
modified when the device is running. Programming the alpha value in
the control set handler is thus prohibited. Program it when starting the
module instead.
This requires storing the alpha value internally as the module can be
started from the frame completion interrupt handler, and accessing
control values requires taking a mutex.
As reported by smatch:
drivers/media/platform/vsp1/vsp1_drm.c:39:6: warning: no previous prototype for 'vsp1_drm_frame_end' [-Wmissing-prototypes]
void vsp1_drm_frame_end(struct vsp1_pipeline *pipe)
Fixes: ef9621bcd664 ("[media] v4l: vsp1: Store the display list manager in the WPF") Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[media] v4l: vsp1: bru: Don't program background color in control set handler
The datasheet clearly states that all but a few registers can't be
modified when the device is running. Programming the background color
in the control set handler is thus prohibited. Program it when starting
the module instead.
This requires storing the background color value internally as the
module can be started from the frame completion interrupt handler, and
accessing control values requires taking a mutex.
Laurent Pinchart [Sun, 15 Nov 2015 00:27:52 +0000 (22:27 -0200)]
[media] v4l: vsp1: Store the display list manager in the WPF
Each WPF can process display lists independently, move the manager to
the WPF to reflect that and prepare for display list support for non-DRM
pipelines.
Laurent Pinchart [Sat, 14 Nov 2015 18:33:40 +0000 (16:33 -0200)]
[media] v4l: vsp1: Simplify frame end processing
The DRM pipeline, as it runs in automatic restart mode, never sees the
pipeline state set to VSP1_PIPELINE_STOPPING or VSP1_PIPELINE_STOPPED
when running the frame end interrupt handler. We can thus skip the
checks various checks in the handler and return immediately.
Similarly the DRM frame end handler calls vsp1_pipeline_run()
unnecessarily, as the state there is never VSP1_PIPELINE_STOPPED. Remove
the function call and the frame end handler is it's now empty.
Make sure display list usage is correctly disabled by always setting up
the corresponding registers, including when the display list feature
isn't used.
Laurent Pinchart [Mon, 29 Feb 2016 02:28:38 +0000 (23:28 -0300)]
[media] v4l: vsp1: video: Fix coding style
Commit 54b5a749b4f3 ("[media] v4l: vsp1: Use media entity enumeration
interface") wasn't aligned with the driver coding style. Fix it by
renaming the rval variable to ret.
Furthermore shorten lines by accessing the media_device instance in a
more straightforward fashion.
Laurent Pinchart [Sat, 20 Feb 2016 01:13:45 +0000 (23:13 -0200)]
[media] v4l: vsp1: drm: Include correct header file
The VSP1 DRM API is declared in <media/vsp1.h>, not <linux/vsp1.h>. Fix
it. This also reverts commit 18922936dc28 ("[media] vsp1_drm.h: add
missing prototypes") that added the same declarations in a different
header file.
[media] v4l: subdev: Add pad config allocator and init
Add a new subdev operation to initialize a subdev pad config array, and
a helper function to allocate and initialize the array. This can be used
by bridge drivers to implement try format based on subdev pad
operations.
Laurent Pinchart [Mon, 29 Feb 2016 11:45:45 +0000 (08:45 -0300)]
[media] media: Rename is_media_entity_v4l2_io to is_media_entity_v4l2_video_device
All users of is_media_entity_v4l2_io() (the exynos4-is, omap3isp,
davince_vpfe and omap4iss drivers and the v4l2-mc power management code)
use the function to check whether entities are video_device instances,
either to ensure they can cast the entity to a struct video_device, or
to count the number of video nodes users.
The purpose of the function is thus to identify whether the media entity
instance is an instance of the video_device object, not to check whether
it can perform I/O. Rename it accordingly, we will introduce a more
specific is_media_entity_v4l2_io() check when needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Laurent Pinchart [Mon, 29 Feb 2016 11:45:44 +0000 (08:45 -0300)]
[media] media: Add obj_type field to struct media_entity
Code that processes media entities can require knowledge of the
structure type that embeds a particular media entity instance in order
to cast the entity to the proper object type. This needs is shown by the
presence of the is_media_entity_v4l2_io and is_media_entity_v4l2_subdev
functions.
The implementation of those two functions relies on the entity function
field, which is both a wrong and an inefficient design, without even
mentioning the maintenance issue involved in updating the functions
every time a new entity function is added. Fix this by adding add an
obj_type field to the media entity structure to carry the information.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Simon Horman [Tue, 15 Mar 2016 00:40:27 +0000 (21:40 -0300)]
[media] soc_camera: rcar_vin: add device tree support for r8a7792
Simply document new compatibility string.
As a previous patch adds a generic R-Car Gen2 compatibility string
there appears to be no need for a driver updates.
By documenting this compat string it may be used in DTSs shipped, for
example as part of ROMs. It must be used in conjunction with the Gen2
fallback compat string. At this time there are no known differences between
the r8a7792 IP block and that implemented by the driver for the Gen2
fallback compat string. Thus there is no need to update the driver as the
use of the Gen2 fallback compat string will activate the correct code in
the current driver while leaving the option for r8a7792-specific driver
code to be activated in an updated driver should the need arise.
Yoshihiro Kaneko [Tue, 15 Mar 2016 00:40:26 +0000 (21:40 -0300)]
[media] soc_camera: rcar_vin: add R-Car Gen 2 and 3 fallback compatibility strings
Add fallback compatibility string for R-Car Gen 1 and 2.
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 2 and 3. But beyond that it's unclear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.
Simon Horman [Tue, 8 Mar 2016 01:03:58 +0000 (22:03 -0300)]
[media] sh_mobile_ceu_camera: Remove dependency on SUPERH
A dependency on ARCH_SHMOBILE seems to be the best option for
sh_mobile_ceu_camera:
* For Super H based SoCs: sh_mobile_ceu is used on SH_AP325RXA, SH_ECOVEC,
SH_KFR2R09, SH_MIGOR, and SH_7724_SOLUTION_ENGINE which depend on
CPU_SUBTYPE_SH7722, CPU_SUBTYPE_SH7723, or CPU_SUBTYPE_SH7724 which all
select ARCH_SHMOBILE.
* For ARM Based SoCs: Since the removal of legacy (non-multiplatform)
support this driver has not been used by any Renesas ARM based SoCs.
The Renesas ARM based SoCs currently select ARCH_SHMOBILE, however,
it is planned that this will no longer be the case.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Thanks to Geert Uytterhoeven for analysis and portions of the
change log text.
Simon Horman [Tue, 8 Mar 2016 01:03:55 +0000 (22:03 -0300)]
[media] rcar_vin: Use ARCH_RENESAS
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Dan Carpenter [Tue, 15 Mar 2016 07:07:10 +0000 (04:07 -0300)]
[media] m5mols: potential uninitialized variable
Smatch complains that there are some paths where "status" isn't
initialized. The code does assume that m5mols_read_u8() can fail so it
seems as if Smatch is correct.
Let's initialize it to REG_ISO_AUTO which is zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Dan Carpenter [Tue, 15 Mar 2016 07:05:20 +0000 (04:05 -0300)]
[media] cx23885: uninitialized variable in cx23885_av_work_handler()
The "handled" variable could be uninitialized if the
interrupt_service_routine() call back hasn't been implimented or if it
has been implemented but doesn't initialize "handled" to zero at the
start. For example, adv76xx_isr() only sets "handled" to true.
Fixes: 44b153ca639f ('[media] m5mols: Add ISO sensitivity controls') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Arnd Bergmann [Mon, 14 Mar 2016 22:40:08 +0000 (19:40 -0300)]
[media] am437x-vfpe: fix typo in vpfe_get_app_input_index
gcc-6 points out an obviously silly comparison in vpfe_get_app_input_index():
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_app_input_index':
drivers/media/platform/am437x/am437x-vpfe.c:1709:27: warning: self-comparison always evaluats to true [-Wtautological-compare]
client->adapter->nr == client->adapter->nr) {
^~
This was introduced in a slighly incorrect conversion, and it's
clear that the comparison was meant to compare the iterator
to the current subdev instead, as we do in the line above.
Fixes: d37232390fd4 ("[media] media: am437x-vpfe: match the OF node/i2c addr instead of name") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Arnd Bergmann [Mon, 14 Mar 2016 22:40:07 +0000 (19:40 -0300)]
[media] cobalt: add MTD dependency
The cobalt driver fails to link when it is built-in and MTD is disabled or a
loadable module:
drivers/media/built-in.o: In function `cobalt_flash_probe':
:(.text+0xb8b46): undefined reference to `mtd_device_parse_register'
:(.text+0xb8b88): undefined reference to `do_map_probe'
drivers/media/built-in.o: In function `cobalt_flash_remove':
:(.text+0xb8bb4): undefined reference to `mtd_device_unregister'
:(.text+0xb8bbe): undefined reference to `map_destroy'
This adds a Kconfig dependency to ensure we can call the API.
Tiffany Lin [Mon, 14 Mar 2016 11:16:14 +0000 (08:16 -0300)]
[media] media: v4l2-compat-ioctl32: fix missing reserved field copy in put_v4l2_create32
In v4l2-compliance utility, test VIDIOC_CREATE_BUFS will check whether reserved
filed of v4l2_create_buffers filled with zero
Reserved field is filled with zero in v4l_create_bufs.
This patch copy reserved field of v4l2_create_buffer from kernel space to user
space
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v3.19 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[media] exynos-gsc: remove an always false condition
As reported by smatch:
drivers/media/platform/exynos-gsc/gsc-core.c:1073 gsc_probe() warn: impossible condition '(gsc->id < 0) => (0-65535 < 0)'
drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_probe':
drivers/media/platform/exynos-gsc/gsc-core.c:1073:51: warning: comparison is always false due to limited range of data type [-Wtype-limits]
if (gsc->id >= drv_data->num_entities || gsc->id < 0) {
^
gsc->id is an u16, so it can never be a negative number. So,
remove the always false condition.
[media] exynos4-is: Put node before s5pcsis_parse_dt() return error
The MIPI CSIS DT parse function return an -ENXIO errno if the port #
is outside of the supported values. But it doesn't call of_node_put()
to decrement the node's reference counter, that's incremented inside
the of_graph_get_next_endpoint() function that was called before.
Instead of just returning, go to the error path that already does it.
Merge tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some bug fixes on au0828 and snd-usb-audio:
- the au0828+snd-usb-audio MC patch broke several things and produced
some race conditions. Better to revert the patches, and re-work on
them for a next version
- fix a regression at tuner disable links logic
- properly handle dev_state as a bitmask"
* tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] Revert "[media] media: au0828 change to use Managed Media Controller API"
[media] Revert "[media] sound/usb: Use Media Controller API to share media resources"
[media] au0828: Fix dev_state handling
[media] au0828: fix au0828_v4l2_close() dev_state race condition
[media] media: au0828 fix to clear enable/disable/change source handlers
[media] v4l2-mc: cleanup a warning
[media] au0828: disable tuner links and cache tuner/decoder
Merge tag 'linux-kselftest-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update for Kselftest contains seccomp fixes"
* tag 'linux-kselftest-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest/seccomp: Fix the seccomp(2) signature
selftest/seccomp: Fix the flag name SECCOMP_FILTER_FLAG_TSYNC
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"This is the first round of MIPS fixes for 4.6:
- Fix spelling mistakes all over arch/mips
- Provide __bswapsi2 so XZ kernel compression will build with older GCC
- ATH79 clock fixes.
- Fix clock-rated copy-paste erros in ATH79 DTS.
- Fix gisb-arb compatible string for 7435 BMIPS
- Enable NAND and UBIFS support in CI20.
- Fix BUG() assertion caused by inapropriate smp_processor_id() use.
- Fix exception handling issues for the sake of debuggers
- Fix the last remaining instance of irq_to_gpio in the db1xxx_ss PCMCIA code
- Fix MSA unaligned load failures
- Panic if kernel is configured for a not TLB-supported page size
- Bail out on unsupported relocs in modules.
- Partial fix for Qemu breakage after recent IPI rewrite
- Wire up the preadv2 and pwrite2 syscalls
- Fix the ar724x clock calculation"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: traps.c: Verify the ISA for microMIPS RDHWR emulation
MIPS: BMIPS: Fix gisb-arb compatible string for 7435
MIPS: Bail on unsupported module relocs
MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name
MIPS: ath79: Fix the ar913x reference clock rate
MIPS: ath79: Fix the ar724x clock calculation
dt-bindings: clock: qca,ath79-pll: fix copy-paste typos
MIPS: traps: Correct the SIGTRAP debug ABI in `do_watch' and `do_trap_or_bp'
FIRMWARE: Broadcom: Fix grammar of warning messages in bcm47xx_sprom.c.
MIPS: ci20: Enable NAND and UBIFS support in defconfig.
MIPS: Fix misspellings in comments.
MIPS: tlb-r4k: panic if the MMU doesn't support PAGE_SIZE
MIPS: zboot: Remove copied source files on clean
MIPS: zboot: Fix the build with XZ compression on older GCC versions
MIPS: Wire up preadv2 and pwrite2 syscalls.
MIPS: cpu_name_string: Use raw_smp_processor_id().
pcmcia: db1xxx_ss: fix last irq_to_gpio user
MIPS: Fix MSA ld unaligned failure cases
MIPS: Fix broken malta qemu
Merge tag 'for-linus-4.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from David Vrabel:
"Regression and bug fixes for 4.6-rc2:
- safely migrate event channels between CPUs
- fix CPU hotplug
- maintainer changes"
* tag 'for-linus-4.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: xen: Konrad to step down and Juergen to pick up
xen/events: Mask a moving irq
Xen on ARM and ARM64: update MAINTAINERS info
xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()
xen/apic: Provide Xen-specific version of cpu_present_to_apicid APIC op
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota fixes from Jan Kara:
"Fixes for oopses when the new quotactl gets used with quotas disabled"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ocfs2: Fix Q_GETNEXTQUOTA for filesystem without quotas
quota: Handle Q_GETNEXTQUOTA when quota is disabled
Merge tag 'f2fs-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim.
* tag 'f2fs-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: retrieve IO write stat from the right place
f2fs crypto: fix corrupted symlink in encrypted case
f2fs: cover large section in sanity check of super
In commit e45708976aea ("drm/dp-helper: Move the legacy helpers to
gma500") the legacy i2c helpers were moved to the only remaining user of
them, the gma500 driver. Together with that move, i2c_dp_aux_add_bus()
was marked deprecated and started warning about its remaining use.
It's now been a year and a half of annoying warning, and apparently
nobody cares enough about gma500 to try to move it along to the more
modern models.
Get rid of the warning - if even the gma500 people don't care enough,
then they should certainly not spam other innocent developers with a
warning that might hide other, much more real issues.
Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
"PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
Let's stop pretending that pages in page cache are special. They are
not.
The first patch with most changes has been done with coccinelle. The
second is manual fixups on top.
The third patch removes macros definition"
[ I was planning to apply this just before rc2, but then I spaced out,
so here it is right _after_ rc2 instead.
As Kirill suggested as a possibility, I could have decided to only
merge the first two patches, and leave the old interfaces for
compatibility, but I'd rather get it all done and any out-of-tree
modules and patches can trivially do the converstion while still also
working with older kernels, so there is little reason to try to
maintain the redundant legacy model. - Linus ]
* PAGE_CACHE_SIZE-removal:
mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
MIPS: traps.c: Verify the ISA for microMIPS RDHWR emulation
Make sure it's the microMIPS rather than MIPS16 ISA before emulating
microMIPS RDHWR. Mostly needed as an optimisation for configurations
where `cpu_has_mmips' is hardcoded to 0 and also a good measure in case
we add further microMIPS instructions to emulate in the future, as the
corresponding MIPS16 encoding is ADDIUSP, not supposed to trap.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12282/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sun, 31 Jan 2016 22:52:05 +0000 (14:52 -0800)]
MIPS: BMIPS: Fix gisb-arb compatible string for 7435
The SUN GISB arbiter was added with the wrong compatible string, leading to
using the wrong register layout, use the correct compatible string for this
chip: brcm,bcm7435-gisb-arb.
If at this moment target processor is handling an unrelated event in
evtchn_2l_handle_events()'s loop it may pick up our event since target's
cpu_evtchn_mask claims that this event belongs to it *and* the event is
unmasked and still pending. At the same time, source CPU will continue
executing its own handle_edge_irq().
With FIFO interrupt the scenario is similar: irq_move_irq() may result
in a EVTCHNOP_unmask hypercall which, in turn, may make the event
pending on the target CPU.
We can avoid this situation by moving and clearing the event while
keeping event masked.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core kernel fixes from Ingo Molnar:
"This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness
you noted during the original nohz pull request, plus there's also
misc fixes:
- fix liblockdep build bug
- fix uapi header build bug
- print more lockdep hash collision info to help debug recent reports
of hash collisions
- update MAINTAINERS email address"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update my email address
locking/lockdep: Print chain_key collision information
uapi/linux/stddef.h: Provide __always_inline to userspace headers
tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh
locking/atomic, sched: Unexport fetch_or()
timers/nohz: Convert tick dependency mask to atomic_t
locking/atomic: Introduce atomic_fetch_or()
Commit 840f5b0572ea ("media: au0828 disable tuner to demod link in
au0828_media_device_register()") removed all uses of the 'dtv_demod',
but left the variable itself around.
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This lot contains:
- Some fixups for the fallout of the topology consolidation which
unearthed AMD/Intel inconsistencies
- Documentation for the x86 topology management
- Support for AMD advanced power management bits
- Two simple cleanups removing duplicated code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add advanced power management bits
x86/thread_info: Merge two !__ASSEMBLY__ sections
x86/cpufreq: Remove duplicated TDP MSR macro definitions
x86/Documentation: Start documenting x86 topology
x86/cpu: Get rid of compute_unit_id
perf/x86/amd: Cleanup Fam10h NB event constraints
x86/topology: Fix AMD core count
Paul Burton [Thu, 4 Feb 2016 13:05:02 +0000 (13:05 +0000)]
MIPS: Bail on unsupported module relocs
When an unsupported reloc is encountered in a module, we currently
blindly branch to whatever would be at its entry in the reloc handler
function pointer arrays. This may be NULL, or if the unsupported reloc
has a type greater than that of the supported reloc with the highest
type then we'll dereference some value after the function pointer array
& branch to that. The result is at best a kernel oops.
Fix this by checking that the reloc type has an entry in the function
pointer array (ie. is less than the number of items in the array) and
that the handler is non-NULL, returning an error code to fail the module
load if no handler is found.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12432/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Antony Pavlov [Thu, 17 Mar 2016 03:34:13 +0000 (06:34 +0300)]
MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name
Current ath79 clock.c code does not read reference clock and
pll setup from devicetree. The ar724x_clocks_init() function
recreates the clocks from scratch so devicetree clock
information is dropped. After adding the code which picked up
reference clock from devicetree I have found
that kernel does not boot anymore. The SPI and UART drivers
can't get clk; here are the bootlog error messages:
of_serial: probe of 18020000.uart failed with error -22
ath79-spi: probe of 1f000000.spi failed with error -22
The problem is that clock code assumes that reference clock
name is "ref" but current dts-file uses another name: "oscillator".
This patch fixes the problem by changing external oscillator
dt node name to "ref".
Please note that there is an alternative solution for the problem:
Alban Bedel [Thu, 17 Mar 2016 03:34:10 +0000 (06:34 +0300)]
MIPS: ath79: Fix the ar913x reference clock rate
The reference clock on ar913x is at 40MHz and not 5MHz. The current
implementation use the wrong reference rate because it doesn't take
the PLL divider in account. But if we fix the code to use the divider
it becomes identical with the implementation for ar724x, so just drop
the broken ar913x implementation.
MIPS: traps: Correct the SIGTRAP debug ABI in `do_watch' and `do_trap_or_bp'
Follow our own rules set in <asm/siginfo.h> for SIGTRAP signals issued
from `do_watch' and `do_trap_or_bp' by setting the signal code to
TRAP_HWBKPT and TRAP_BRKPT respectively, for Watch exceptions and for
those Breakpoint exceptions whose originating BREAK instruction's code
does not have a special meaning. Keep Trap exceptions unaffected as
these are not debug events.
No existing user software is expected to examine signal codes for these
signals as SI_KERNEL has been always used here. This change makes the
MIPS port more like other Linux ports, which reduces the complexity and
provides for performance improvement in GDB.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Pedro Alves <palves@redhat.com> Cc: Luis Machado <lgustavo@codesourcery.com> Cc: linux-mips@linux-mips.org Cc: gdb@sourceware.org
Patchwork: https://patchwork.linux-mips.org/patch/12758/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Mon, 13 Jul 2015 16:12:44 +0000 (17:12 +0100)]
MIPS: tlb-r4k: panic if the MMU doesn't support PAGE_SIZE
After writing the appropriate mask to the cop0 PageMask register, read
the register back & check it matches what we want. If it doesn't then
the MMU does not support the page size the kernel is configured for and
we're better off bailing than continuing to do odd things with TLB
exceptions.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10691/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Alban Bedel [Tue, 26 Jan 2016 08:38:27 +0000 (09:38 +0100)]
MIPS: zboot: Fix the build with XZ compression on older GCC versions
Some older GCC version (at least 4.6) emits calls to __bswapsi2() when
building the XZ decompressor. The link of the compressed image then
fails with the following error:
arch/mips/boot/compressed/decompress.o: In function '__fswab32':
include/uapi/linux/swab.h:60: undefined reference to '__bswapsi2'
Add bswapsi.o to the link to fix the build with these versions.
Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12232/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Merge tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc
Pull remoteproc fix from Bjorn Andersson:
"Fix incorrect error check in the ST remoteproc driver and advertise
the newly created linux-remoteproc mailing list"
* tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc:
MAINTAINERS: Add mailing list for remote processor subsystems
remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value
Pull SCSI target fixes from Nicholas Bellinger:
"This includes fixes from HCH for -rc1 configfs default_groups
conversion changes that ended up breaking some iscsi-target
default_groups, along with Sagi's ib_drain_qp() conversion for
iser-target to use the common caller now available to RDMA kernel
consumers in v4.6+ code"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: add a new add_wwn_groups fabrics method
target: initialize the nacl base CIT begfore init_nodeacl
target: remove ->fabric_cleanup_nodeacl
iser-target: Use ib_drain_qp
Convert straggling drivers to new six-argument get_user_pages()
Commit d4edcf0d5695 ("mm/gup: Switch all callers of get_user_pages() to
not pass tsk/mm") switched get_user_pages() callers to the simpler model
where they no longer pass in the thread and mm pointer. But since then
we've merged changes to a few drivers that re-introduce use of the old
interface. Let's fix them up.
They continued to work fine (thanks to the truly disgusting macros
introduced in commit cde70140fed8: "mm/gup: Overload get_user_pages()
functions"), but cause unnecessary build noise.
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of const updates for reset ops and a couple fixes to the
newly introduced IPQ4019 clock driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll
clk: qcom: ipq4019: switch remaining defines to enums
clk: qcom: Make reset_control_ops const
clk: tegra: Make reset_control_ops const
clk: sunxi: Make reset_control_ops const
clk: atlas7: Make reset_control_ops const
clk: rockchip: Make reset_control_ops const
clk: mmp: Make reset_control_ops const
clk: mediatek: Make reset_control_ops const
Merge tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fix from Rafael J. Wysocki:
"Just one fix for a nasty boot failure on some systems based on Intel
Skylake that shipped with broken firmware where enabling
hardware-coordinated P-states management (HWP) causes a faulty
interrupt handler in SMM to be invoked and crash the system (Srinivas
Pandruvada)"
* tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Request native thermal interrupt handling via _OSC
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
.mailmap: add Christophe Ricard
Make CONFIG_FHANDLE default y
mm/page_isolation.c: fix the function comments
oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head
mm/page_isolation: fix tracepoint to mirror check function behavior
mm/rmap: batched invalidations should use existing api
x86/mm: TLB_REMOTE_SEND_IPI should count pages
mm: fix invalid node in alloc_migrate_target()
include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock()
mm, kasan: fix compilation for CONFIG_SLAB
MAINTAINERS: orangefs mailing list is subscribers-only
Merge branch 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This has a few fixes Dave Sterba had queued up. These are all pretty
small, but since they were tested I decided against waiting for more"
* 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: transaction_kthread() is not freezable
btrfs: cleaner_kthread() doesn't need explicit freeze
btrfs: do not write corrupted metadata blocks to disk
btrfs: csum_tree_block: return proper errno value
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- fix oops when patching in alternative sequences on big-endian CPUs
- reconcile asm/perf_event.h after merge window fallout with KVM ARM
- defconfig updates
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: updates for 4.6
arm64: perf: Move PMU register related defines to asm/perf_event.h
arm64: opcodes.h: Add arm big-endian config options before including arm header
Merge tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- a fix in ALSA timer core to avoid possible BUG() trigger
- a fix in ALSA timer core 32bit compat layer
- a few HD-audio quirks for ASUS and HP machines
- AMD HD-audio HDMI controller quirks
- fixes of USB-audio double-free at some error paths
- a fix for memory leak in DICE driver at hotunplug"
* tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Use mod_timer() for rearming the system timer
ALSA: hda - fix front mic problem for a HP desktop
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps
ALSA: dice: fix memory leak when unplugging
ALSA: hda - Apply fix for white noise on Asus N550JV, too
ALSA: hda - Fix white noise on Asus N750JV headphone
ALSA: hda - Asus N750JV external subwoofer fixup
ALSA: timer: fix gparams ioctl compatibility for different architectures
Newer Fedora and OpenSUSE didn't boot with my standard configuration.
It took me some time to figure out why, in fact I had to write a script
to try different config options systematically.
The problem is that something (systemd) in dracut depends on
CONFIG_FHANDLE, which adds open by file handle syscalls.
While it is set in defconfigs it is very easy to miss when updating
older configs because it is not default y.
Make it default y and also depend on EXPERT, as dracut use is likely
widespread.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Zhang [Fri, 1 Apr 2016 21:31:37 +0000 (14:31 -0700)]
mm/page_isolation.c: fix the function comments
Commit fea85cff11de ("mm/page_isolation.c: return last tested pfn rather
than failure indicator") changed the meaning of the return value. Let's
change the function comments as well.
Signed-off-by: Neil Zhang <neilzhang1123@hotmail.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 1 Apr 2016 21:31:34 +0000 (14:31 -0700)]
oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head
Commit bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using
simpler way") has simplified the check for tasks already enqueued for
the oom reaper by checking tsk->oom_reaper_list != NULL. This check is
not sufficient because the tsk might be the head of the queue without
any other tasks queued and then we would simply lockup looping on the
same task. Fix the condition by checking for the head as well.
Fixes: bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-beck.git / log