Ville Syrjälä [Tue, 19 May 2015 17:32:56 +0000 (20:32 +0300)]
drm/i915: Move WaProgramL3SqcReg1Default:bdw to init_clock_gating()
GEN8_L3SQCREG1 isn't saved in the context (verified by going through
a context dump), and so we shouldn't be using the ring w/a code to
initialize it. Also Bspec explicitly talks about MMIO and writing it
with the CPU.
Additionally there's another w/a WaTempDisableDOPClkGating:bdw which
tells us to disable DOP clock gating around the GEN8_L3SQCREG1 write
to make sure everyone notices the change. So let's do that as well.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 19 May 2015 17:32:55 +0000 (20:32 +0300)]
drm/i915: Use ilk_init_lp_watermarks() on BDW
We're not using ilk_init_lp_watermarks() on BDW for some reason.
Probably due to the BDW patches and the relevant WM patches landing
roughlly at the same time. Fix it up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:36 +0000 (17:17 +0300)]
drm/i915: Disable SDVO port after the pipe on PCH platforms
While at it also remove the redundant/unneeded w/a like done for hdmi
already.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Mention that this also removes the unneeded w/a, as suggested
by Jesse.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:35 +0000 (17:17 +0300)]
drm/i915: Disable HDMI port after the pipe on PCH platforms
BSpec says we should disable all ports after the pipe on PCH
platforms. Do so. Fixes a pipe off timeout on ILK now caused by
the transcoder B workaround.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:34 +0000 (17:17 +0300)]
drm/i915: Fix the IBX transcoder B workarounds
Currently the IBX transcoder B workarounds are not working correctly.
Well, the HDMI one seems to be working somewhat, but the DP one is
definitely busted.
After a bit of experimentation it looks like the best way to make this
work is first disable the port on transcoder B, and then re-enable it
transcoder A, and immediately disable it again.
We can also clean up the code by noting that we can't be called without
a valid crtc. And also note that port A on ILK does not need the
workaround, so let's check for that one too.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:33 +0000 (17:17 +0300)]
drm/i915: Write the SDVO reg twice on IBX
On IBX the SDVO/HDMI register write may be masked when enabling the
port, so it may need to written twice. The HDMI code does this, but
the SDVO code does not. Add the workaround to the SDVO code as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:31 +0000 (17:17 +0300)]
drm/i915: Fix DP enhanced framing for CPT
Currently we're always enabling enhanced framing on CPT even if the sink
doesn't support it. Fix this up by actaully looking at what the sink
tells us.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:29 +0000 (17:17 +0300)]
drm/i915: Clarfify the DP code platform checks
intel_dp.c is a mess with all the checks for different
platform/PCH variants and ports. Try to clean it up by recognizing
the following facts:
- IVB port A, and CPT port B/C/D are always the special cases
- VLV/CHV don't have port A
- Using the same kind of logic everywhere makes things much easier to
parse
So let's move the IVB port A and PCH port B/C/D checks to be done first,
and let the other cases fall through, and always check for these things
using the same logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:28 +0000 (17:17 +0300)]
drm/i915: Remove the double register write from intel_disable_hdmi()
IBX can have problems with the first write to the port register getting
masked when enabling the port. We are trying to apply the workaround
also when disabling the port where it's not needed, and we also try
to apply it for CPT/PPT as well which don't need it. Just kill it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict with the remove CHV if block.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 5 May 2015 14:17:27 +0000 (17:17 +0300)]
drm/i915: Remove a bogus 12bpc "toggle" from intel_disable_hdmi()
The IBX 12bpc port enable toggle is only relevant when enabling
the port, not when disabling it. Also this code doesn't actually
toggle anything, and essentially just writes the port register
one extra time. Furthermore CPT/PPT don't need such workarounds
and yet we include them. Just kill it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Thu, 21 May 2015 15:37:48 +0000 (16:37 +0100)]
drm/i915/skl: Deinit/init the display at suspend/resume
We need to re-init the display hardware when going out of suspend. This
includes:
- Hooking the PCH to the reset logic
- Restoring CDCDLK
- Enabling the DDB power
Among those, only the CDCDLK one is a bit tricky. There's some
complexity in that:
- DPLL0 (which is the source for CDCLK) has two VCOs, each with a set
of supported frequencies. As eDP also uses DPLL0 for its link rate,
once DPLL0 is on, we restrict the possible eDP link rates the chosen
VCO.
- CDCLK also limits the bandwidth available to push pixels.
So, as a first step, this commit restore what the BIOS set, until I can
do more testing.
In case that's of interest for the reviewer, I've unit tested the
function that derives the decimal frequency field:
for (i = 0; i < ARRAY_SIZE(freqs); i++)
test_freq(&freqs[i]);
return 0;
}
v2:
- Rebase on top of -nightly
- Use (freq - 1000) / 500 for the decimal frequency (Ville)
- Fix setting the enable bit of HSW_NDE_RSTWRN_OPT (Ville)
- Rename skl_display_{resume,suspend} to skl_{init,uninit}_cdclk to
be consistent with the BXT code (Ville)
- Store boot CDCLK in ddi_pll_init (Ville)
- Merge dev_priv's skl_boot_cdclk into cdclk_freq
- Use LCPLL_PLL_LOCK instead of (1 << 30) (Ville)
- Replace various '0' by SKL_DPLL0 to be a bit more explicit that
we're programming DPLL0
- Busy poll the PCU before doing the frequency change. It takes about
3/4 cycles, each separated by 10us, to get the ACK from the CPU
(Ville)
v3:
- Restore dev_priv->skl_boot_cdclk, leaving unification with
dev_priv->cdclk_freq for a later patch (Daniel, Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:24 +0000 (13:41 +0100)]
drm/i915: Free RPS boosts for all laggards
If the client stalls on a congested request, chosen to be 20ms old to
match throttling, allow the client a free RPS boost.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/]
[danvet: s/0/NULL/ reported by 0-day build] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:23 +0000 (13:41 +0100)]
drm/i915: Don't downclock whilst we have clients waiting for GPU results
If we have clients stalled waiting for requests, ignore the GPU if it
signals that it should downclock due to low load. This helps prevent
the automatic timeout from causing extremely long running batches from
taking even longer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:22 +0000 (13:41 +0100)]
drm/i915: Convert RPS tracking to a intel_rps_client struct
Now that we have internal clients, rather than faking a whole
drm_i915_file_private just for tracking RPS boosts, create a new struct
intel_rps_client and pass it along when waiting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:21 +0000 (13:41 +0100)]
drm/i915: Limit mmio flip RPS boosts
Since we will often pageflip to an active surface, we will often have to
wait for the surface to be written before issuing the flip. Also we are
likely to wait on that surface in plenty of time before the vblank.
Since we have a mechanism for boosting when a flip misses the expected
vblank, curtain the number of times we RPS boost when simply waiting for
mmioflip.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:20 +0000 (13:41 +0100)]
drm/i915: Limit ring synchronisation (sw sempahores) RPS boosts
Ring switches can occur many times per frame, and are often out of
control, causing frequent RPS boosting for no practical benefit. Treat
the sw semaphore synchronisation as a separate client and only allow it
to boost once per busy/idle cycle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/rq/req/] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently, we only track the last request globally across all engines.
This prevents us from issuing concurrent read requests on e.g. the RCS
and BCS engines (or more likely the render and media engines). Without
semaphores, we incur costly stalls as we synchronise between rings -
greatly impacting the current performance of Broadwell versus Haswell in
certain workloads (like video decode). With the introduction of
reference counted requests, it is much easier to track the last request
per ring, as well as the last global write request so that we can
optimise inter-engine read read requests (as well as better optimise
certain CPU waits).
v2: Fix inverted readonly condition for nonblocking waits.
v3: Handle non-continguous engine array after waits
v4: Rebase, tidy, rewrite ring list debugging
v5: Use obj->active as a bitfield, it looks cool
v6: Micro-optimise, mostly involving moving code around
v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf)
v8: Rebase
v9: Refactor i915_gem_object_sync() to allow the compiler to better
optimise it.
Benchmark: igt/gem_read_read_speed
hsw:gt3e (with semaphores):
Before: Time to read-read 1024k: 275.794µs
After: Time to read-read 1024k: 123.260µs
hsw:gt3e (w/o semaphores):
Before: Time to read-read 1024k: 230.433µs
After: Time to read-read 1024k: 124.593µs
bdw-u (w/o semaphores): Before After
Time to read-read 1x1: 26.274µs 10.350µs
Time to read-read 128x128: 40.097µs 21.366µs
Time to read-read 256x256: 77.087µs 42.608µs
Time to read-read 512x512: 281.999µs 181.155µs
Time to read-read 1024x1024: 1196.141µs 1118.223µs
Time to read-read 2048x2048: 5639.072µs 5225.837µs
Time to read-read 4096x4096: 22401.662µs 21137.067µs
Time to read-read 8192x8192: 89617.735µs 85637.681µs
Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8]
[danvet: s/\<rq\>/req/g] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 21 May 2015 12:21:25 +0000 (14:21 +0200)]
drm/i915: s/\<rq\>/req/g
The merged seqno->request conversion from John called request
variables req, but some (not all) of Chris' recent patches changed
those to just rq. We've had a lenghty (and inconclusive) discussion on
irc which is the more meaningful name with maybe at most a slight bias
towards req.
Given that the "don't change names without good reason to avoid
conflicts" rule applies, so lets go back to a req everywhere for
consistency. I'll sed any patches for which this will cause conflicts
before applying.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: John Harrison <John.C.Harrison@Intel.com>
[danvet: s/origina/merged/ as pointed out by Chris - the first
mass-conversion patch was from Chris, the merged one from John.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
v2:
- set the override disable flag too on stepping F0 (mika)
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Spotted-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 20 May 2015 13:12:47 +0000 (14:12 +0100)]
drm/i915: Force clean compilation with -Werror
Our driver compiles clean (nowadays thanks to 0day) but for me, at least,
it would be beneficial if the compiler threw an error rather than a
warning when it found a piece of suspect code. (I use this to
compile-check patch series and want to break on the first compiler error
in order to fix the patch.)
v2: Kick off a new "Debugging" submenu for i915.ko
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Add "DRM i915" to the menu name as requested by Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Wed, 20 May 2015 08:10:48 +0000 (13:40 +0530)]
drm/i915/skl: Swapping 90 and 270 to be compliant with Xrandr
Since DRM_ROTATE is counter clockwise (which is compliant with Xrandr),
and HW rotation is clockwise, swapping 90/270 to work as expected from
userspace.
v2: Rebased
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Tue, 19 May 2015 11:29:16 +0000 (12:29 +0100)]
drm/i915: Tighten the exposure ARGB/ABGR 8888 formats
ARGB8888 is used for cursors on all platforms so we need to allow it
everywhere.
ABGR8888 is currently only honoured:
- on VLV/CHV in sprite planes
- on SKL+ for primary and sprite planes
so only allow it for those platforms.
Note that we only support ARGB8888/ABGR8888 on the primary plane for
SKL/BXT because we have in line of sight the pipe bottom color on those
platforms and because the primary plane programming on VLV/CHV doesn't
anything different for those formats today.
v2: Fix the logic to forbid the creation ABGR2101010 fbs (Ville)
v3: Still allow the creation of ARGB8888 fbs now that cursor planes use
real fb objects (found by PRTS).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Vandana Kannan [Wed, 13 May 2015 06:48:52 +0000 (12:18 +0530)]
drm/i915/bxt: Port PLL programming BUN
BUN 1: prop_coeff, int_coeff, tdctargetcnt programming updated and tied to
VCO frequencies. Program i_lockthresh in PORT_PLL_9.
VCO calculated based on the formula:
Desired Output = Port bit rate in MHz (DisplayPort HBR2 is 5400 MHz)
Fast Clock = Desired Output / 2
VCO = Fast Clock * P1 * P2
Prop_coeff, int_coeff, and tdctargetcnt modified according to above
calculation.
BUN 2: Port PLLs require additional programming at certain frequencies -
DCO amplitude in PORT_PLL_10
Review comments from Siva which were addressed in the initial version of the
patch.
- Change PORT_PLL_LOCK_THRESHOLD to PORT_PLL_LOCK_THRESHOLD_MASK
- Calculate for HDMI
- Correct values for vco = 5.4
- return in case of invalid vco range
v2: Imre's review comments addressed
- change dcoampovr_en to dcoampovr_en_h
- change PORT_PLL_DCO_AMP_OVR_EN to PORT_PLL_DCO_AMP_OVR_EN_H
- Correct lane stagger value for 324MHz
- Make coef common for HDMI and DP
- remove superfluous comments
v3: Imre's comments addressed
- Remove Prop_coeff, int_coeff, tdctargetcnt, dcoampovr_en, gain_ctl,
dcoampovr_en_h from bxt_clk_div and make them local variables.
Chris Wilson [Fri, 15 May 2015 10:42:21 +0000 (11:42 +0100)]
drm/i915: Use uninterruptible mutex_lock for userptr bo creation
Mika encountered one pathological scenario under X where acquiring all
the mm locks (required to insert a mmu notifier) was very slow, so slow
that by the time we tried to lock the struct_mutex with the usual call
to i915_mutex_lock_interruptible(), X's signal timer had fired causing
us to restart the ioctl (and so looped indefinitely).
While I suspect this is the result of another bug (something leaking mm
perhaps?) we can forgo the error checking and interuptible nature of the
lock here so we only have to pay the expense once and get on with it.
This does expose the userptr creation routine to a driver livelock
though by not being interruptible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Init ret to avoid issues reported by PRTS.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Preserve ddi_pll_sel when allocating new pipe_config
When the modeset code is reached with a CRTC that only needs a flip, the
code that assigns PLLs is skipped. But since there is still a state swap
for that CRTC, the current PLL assignment needs to be preserved. I
missed the ddi_pll_sel field in the following commit, which causes
warnings in DDI platforms.
commit 4978cc93d9ac240b435ce60431aef24239b4c270
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:21 2015 +0300
drm/i915: Preserve shared DPLL information in new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90410 Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Don't overwrite (e)DP PLL selection on SKL
In the following commit, the place where the contents of dpll_hw_state
in crtc_state where zeroed was changed. Prior to that commit, it
happened when the new state was allocated, but now that happens just
before the call the .crtc_compute_clock() hook. The DP code for SKL,
however, sets up the (private) PLL in the encoder compute config
function that has already run by the time that memset() is reached,
causing the previous value to be lost.
This patch fixes the issue by moving the memset() down the call chain,
so that it is only called if the values in dpll_hw_state are going to be
updated.
commit 4978cc93d9ac240b435ce60431aef24239b4c270
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:21 2015 +0300
drm/i915: Preserve shared DPLL information in new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90462 Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 13 May 2015 12:34:05 +0000 (15:34 +0300)]
drm/i915/bios: be more explicit about discarding iomem address space
Add one explicit discard of __iomem address space qualifier in
validate_vbt(), and respect it otherwise. This adds clarity in the code,
and reduces the sparse warnings from the module to just one.
Quoting Daniel, "The vbt really is plain old memory. Except that it's
reserved in the e820 table as something special and hence treated as io
range by the kernel. But it is memory, hence casting away the __iomem is
imo the right approach."
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 15 May 2015 14:07:02 +0000 (15:07 +0100)]
drm/i915/skl: Remove unnecessary local variables in skl_plane_ctl*()
Ville noticed in another patch we we didn't need them at all, so remove
them. It's worth saying that it makes no difference to code generated as
gcc is clever enough to optimize it out.
v2: Remove 'break' after 'return' in switches (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 13 May 2015 07:35:25 +0000 (10:35 +0300)]
drm/i915/dsi: add support for DSI PLL N1 divisor values
Currently DSI PLL N1 is hardcoded off. Make it possible to use it
later. This should have no functional changes for now.
v2: s/ffz(~(n))/ffs(n) - 1/ (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Animesh Manna [Wed, 13 May 2015 16:43:29 +0000 (22:13 +0530)]
drm/i915/skl: Documentation for CSR firmware
Added docbook info regarding context save and restore (CSR)
firmware support added from gen9 onwards to drive newly added
DMC (Display microcontroller) in display engine.
v1: Initial version as RFC.
v2: Used "DOC:" tag for csr description based on review comment from Daniel.
Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 15 May 2015 10:09:21 +0000 (13:09 +0300)]
drm/i915: Don't read dpcd for disconnected ports
Reading from disconnected ports will spit out timeout error
on the dmesg. Skip the attempted read if the port is not
connected and avoid confusing users/testcases about
expected timeouts.
This new dpcd debugfs entry was introduced by commit aa7471d228eb
("drm/i915: add i915 specific connector debugfs file for DPCD")
v2 by Jani: move the check at the top, out of the loop.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90060 Tested-by: yex.tian@intel.com Cc: Jani Nikula <jani.nikula@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dan Carpenter [Tue, 12 May 2015 18:07:37 +0000 (21:07 +0300)]
drm/edid: fix a debug message
There is an extra semi-colon on the if statement so the debug output
always says "Failed to write EDID checksum" even when it didn't fail.
Fixes: 559be30cb74d ('drm/i915: Implement the intel_dp_autotest_edid function for DP EDID complaince tests') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Tue, 12 May 2015 15:13:16 +0000 (16:13 +0100)]
drm/i915/skl: Replace BUG() by MISSING_CASE() in skl_plane_ctl_format()
Let's be consistent with the others skl_plane_ctl_*() functions and use
a MISSING_CASE(). Not only that, but it's a rude to BUG() the whole
machine here.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 12 May 2015 12:23:09 +0000 (15:23 +0300)]
drm/i915: clean up dsi pll calculation
Improve readability. No functional changes.
v2: use more rational types (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 12 May 2015 12:41:32 +0000 (15:41 +0300)]
drm/i915: constify validate_vbt in VBT parsing
Make input and output of validate_vbt const, and fix the fallout. We
shouldn't modify the VBT, so make the compiler help us here.
v2: use pointer arithmetics on void* to simplify (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 15 Apr 2015 12:18:28 +0000 (15:18 +0300)]
drm/i915: constify find_section in VBT parsing
Make input and output of find_section const, and fix the fallout. We
shouldn't modify the VBT, so make the compiler help us here.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 11 May 2015 17:49:10 +0000 (20:49 +0300)]
drm/i915: Use HOTPLUG_INT_STATUS_G4X on VLV/CHV
Use HOTPLUG_INT_STATUS_G4X instead of HOTPLUG_INT_STATUS_I915 on VLV/CHV
so that we don't confuse the AUX status bits with SDVO status bits.
Avoid pointless log spam as below while handling AUX interrupts:
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_hpd_irq_handler] hotplug event received, stat 0x00000040, dig 0x00000000
[drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064
Note that there's no functional issue, it's just that the sdvo bits
overlap with the dp aux bits. Hence every time we receive an aux
interrupt we also think there's an sdvo hpd interrupt, but due to lack
of any sdvo encoders nothing ever happens because of that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Add Ville's explanation why nothing functional really
changes.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 11 May 2015 17:49:09 +0000 (20:49 +0300)]
drm/i915: Remove excess inline keywords
Remove some inline keywords. One of the functions has clearly outgrown
it anyway, so let's just leave it to the compiler.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Tue, 12 May 2015 07:35:08 +0000 (10:35 +0300)]
drm/i915/gtt: Fix the boundary check for vm area
The check for start + length >= total_vm_size is
wrong since start + length can be exactly the size of
the vm.
Fix the check to allow allocation to boundary.
Fixes a regression in commit 4dd738e9cd79
("drm/i915: Fix 32b overflow check in gen8_ppgtt_alloc_page_directories")
Testcase: igt/gem_evict_everything/swapping-interruptible
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90399 Tested-by: Lu Hua <huax.lu@intel.com> Cc: Chris Wilson <chris@chris.wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chandra Konduru [Mon, 11 May 2015 21:35:47 +0000 (14:35 -0700)]
drm/i915: Make scaler_id check in check_crtc_state work for all gens
During check_crtc_state, scaler_id mispatch is being reported for HSW.
This is applicable for skl+ and not for HSW. It is introduced by
commit id:
commit a1b2278e4dfcd2dbea85e319ebf73a6b7b2f180b
Author: Chandra Konduru <chandra.konduru@intel.com>
Date: Tue Apr 7 15:28:45 2015 -0700
drm/i915: skylake panel fitting using shared scalers
This patch will make sure that we leave scaler_id as 0 for platforms
before skl and set for skl+ only. This way scaler_id check during
check_crtc_state will pass for both prior to skl and skl+ platforms.
v2:
-Leave scaler_id as 0 for gen < 9 (Daniel)
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
References: http://lists.freedesktop.org/archives/intel-gfx/2015-May/065741.html Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:16 +0000 (13:41 +0100)]
drm/i915: Fix race on unreferencing the wrong mmio-flip-request
As we perform the mmio-flip without any locking and then try to acquire
the struct_mutex prior to dereferencing the request, it is possible for
userspace to queue a new pageflip before the worker can finish clearing
the old state - and then it will clear the new flip request. The result
is that the new flip could be completed before the GPU has finished
rendering.
The bugs stems from removing the seqno checking in
commit 536f5b5e86b225dab94c7ff8061ae482b6077387
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Thu Nov 6 11:03:40 2014 +0200
drm/i915: Make mmio flip wait for seqno in the work function
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:15 +0000 (13:41 +0100)]
drm/i915: Ensure cache flushes prior to doing CS flips
Synchronising to an object active on the same ring is a no-op, for the
benefit of execbuffer scheduler. However, for CS flips this means that
we can forgo checking whether the last write request of the object is
actually queued and more importantly whether the cache flush for the
write was emitted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Apr 2015 12:41:14 +0000 (13:41 +0100)]
drm/i915: Remove domain flubbing from i915_gem_object_finish_gpu()
We no longer interpolate domains in the same manner, and even if we did,
we should trust setting either of the other write domains would trigger
an invalidation rather than force it. Remove the tweaking of the
read_domains since it serves no purpose and use
i915_gem_object_wait_rendering() directly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add notes with information dug out of git history.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Sat, 9 May 2015 12:45:46 +0000 (18:15 +0530)]
drm/i915/chv: Set min freq to efficient frequency on chv
After feedback from the hardware team, now we set the GPU min/idel freq to RPe.
Punit is expecting us to operate GPU between Rpe & Rp0. If we drop the
frequency to RPn, punit is failing to change the vgg input voltage to
minimum :(
Since Punit validates the rps range [RPe, RP0]. This patch
removes unused cherryview_rps_min_freq function.
v2: Change commit message
v3: set min_freq before idle_freq (chris)
v4: Squash 'Remove unused rps min function' patch
Signed-off-by: Deepak S <deepak.s@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Sat, 9 May 2015 12:41:54 +0000 (18:11 +0530)]
drm/i915/chv: Extend set idle rps wa to chv
It is observed on BSW that requesting a new frequency from Punit
does nothing when the GPU is in rc6, and if we let GPU enter rc6
with a high frequency, Vnn remains slightly higher than at minimum
frequency. Extending vlv_set_rps_idle() workaround on CHV/BSW.
v2: Update commit msg (Ville)
suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Sat, 9 May 2015 12:34:44 +0000 (18:04 +0530)]
drm/i915/vlv: Remove wait for for punit to updates freq.
When GPU is idle on VLV, Request freq to punit should be good enough to
get the voltage back to VNN. Also, make sure gfx clock force applies
before requesting the freq fot vlv.
v2: Do forcewake before setting idle frequency (ville)
Update function comments to match the code (Deepak)
v3: Fix get/put across idle frequency Request. (Ville)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75244
suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Sat, 9 May 2015 01:05:55 +0000 (02:05 +0100)]
drm/i915: Be optimistic about future display engines having 7 WM levels
As we're doing throughout the code, being optimistic that platform n + 1
will mostly reuse the same things as platform n allows us to minimize
the enabling work needed.
This time, it's about the number of WM levels.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Always keep crtc_state->active in sync with enable
With the recent modeset internal rework, we wind up setting crtc_state->enable
to false, but leave crtc_state->active as true following a
drmModeSetCrtc(fb=0), which is incorrect. This mismatch gets caught by
drm_atomic_crtc_check() and causes subsequent atomic operations (such as plane
updates while the CRTC is disabled) to fail.
Bisect points to
commit dad9a7d6d96630182fb52aae7c3856e9e7285e13
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
as the commit that actually triggers the regression.
The difference compared to (which this patch reverts)
drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)
is that we know keep state->active/enable in sync for all legacy
modeset paths, as it should be.
Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reported-and-Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Directly squash in the revert and augment the commit
message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Revert "drm/i915: Set crtc_state->active to false when CRTC is disabled (v2)"
drm/i915: Adding dbuf support for skl nv12 format.
Skylake nv12 format requires dbuf (aka. ddb) calculations
and programming for each of y and uv sub-planes. Made minor
changes to reuse current dbuf calculations and programming
for uv plane. i.e., with this change, existing computation
is used for either packed format or uv portion of nv12
depending on incoming format. Added new code for dbuf
computation and programming for y plane.
This patch is a pre-requisite for adding NV12 format support.
Actual nv12 support is coming in later patches.
Dave Airlie [Tue, 19 May 2015 23:20:48 +0000 (09:20 +1000)]
Merge tag 'drm-amdkfd-next-2015-05-19' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Add the interrupts & events modules, including new IOCTLs to create and wait
on events. The HSA RT open source stack is mainly using events to know when
a dispatched work has been completed. In addition, this module is
a pre-requisite for the next module I'm going to upstream - debugger support
This module also handles H/W exceptions, such as memory exception received
through the IOMMUv2 H/W and Bad Opcode exception receieved from the GPU.
- Adding a new kernel module parameter to let the user decide whether he wants
to receive a SIGTERM when a memory exception occurs inside the GPU kernel and
the HSA application doesn't wait on an appropriate event, or if he just want
to receive notification about this event in dmesg. The default is the latter.
- Additional improvements for SDMA code
- Update my email address in Maintainers file.
* tag 'drm-amdkfd-next-2015-05-19' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: change driver version to 0.7.2
drm/amdkfd: Implement events IOCTLs
drm/amdkfd: Add module parameter of send_sigterm
drm/amdkfd: Add bad opcode exception handling
drm/amdkfd: Add memory exception handling
drm/amdkfd: Add the events module
drm/amdkfd: add events IOCTL set definitions
drm/amdkfd: Add interrupt handling module
drm/radeon: Add init interrupt kfd->kgd interface
MAINTAINERS: update amdkfd Oded's email address
drm/amdkfd: make the sdma vm init to be asic specific
drm/amdkfd: Use new struct for asic specific ops
drm/amdkfd: reformat some debug prints
drm/amdkfd: Remove unessary void pointer cast
Dave Airlie [Tue, 19 May 2015 23:19:58 +0000 (09:19 +1000)]
Merge tag 'topic/drm-misc-2015-05-19' of git://anongit.freedesktop.org/drm-intel into drm-next
Scattering of random drm core patches. Bunch of atomic prep work too, but
the final bits for blob properties, atomic modesets and lifting the
experimental tag on the atomic ioctl are still blocked on Daniel Stone
finalizing and testing the weston support for it. I hope that we can get
it all ready for 4.2 though.
* tag 'topic/drm-misc-2015-05-19' of git://anongit.freedesktop.org/drm-intel: (22 commits)
drm/atomic: Allow drivers to subclass drm_atomic_state, v3
drm/atomic: remove duplicated assignment of old_plane_state
drm/dp: Fix comment in DP helper
drm/atomic: add drm_atomic_get_existing_*_state helpers
drm/core: get rid of -Iinclude/drm
drm/i915: get rid of -Iinclude/drm
drm/atomic-helpers: Export drm_atomic_helper_update_legacy_modeset_state
drm/atomic-helpers: Update vblank timestamping constants
drm/sysfs: remove unnecessary connector type checks
drm/sysfs: split DVI-I and TV-out attributes
drm/sysfs: make optional attribute groups per connector type
drm/sysfs: add a helper for extracting connector type from kobject
drm/edid: Add CEA modes before inferred modes
drm/prime: Allow internal imports without import_sg_table
drm: Add reference counting to blob properties
drm: Introduce blob_lock
drm: Introduce helper for replacing blob properties
drm: Don't leak path blob property when updating
drm/atomic: Don't open-code CRTC state destroy
drm/edid: Add DMT modes with ID > 0x50
...
This patch adds Peripheral Page Request (PPR) failure processing
and reporting.
Bad address or pointer to a system memory block with inappropriate
read/write permission cause such PPR failure during a user queue
processing. PPR request handling is done by IOMMU driver notifying
AMDKFD module on PPR failure.
The process triggering a PPR failure will be notified by
appropriate event or SIGTERM signal will be sent to it.
v3:
- Change all bool fields in struct kfd_memory_exception_failure to
uint32_t
Andrew Lewycky [Sun, 10 May 2015 09:15:46 +0000 (12:15 +0300)]
drm/amdkfd: Add the events module
This patch adds the events module (kfd_events.c) and the interrupt
handle module for Kaveri (cik_event_interrupt.c).
The patch updates the interrupt_is_wanted(), so that it now calls the
interrupt isr function specific for the device that received the
interrupt. That function(implemented in cik_event_interrupt.c)
returns whether this interrupt is of interest to us or not.
The patch also updates the interrupt_wq(), so that it now calls the
device's specific wq function, which checks the interrupt source
and tries to signal relevant events.
v2:
Increase limit of signal events to 4096 per process
Remove bitfields from struct cik_ih_ring_entry
Rename radeon_kfd_event_mmap to kfd_event_mmap
Add debug prints to allocate_free_slot and allocate_signal_page
Make allocate_event_notification_slot return a correct value
Add warning prints to create_signal_event
Remove error print from IOCTL path
Reformatted debug prints in kfd_event_mmap
Map correct size (as received from mmap) in kfd_event_mmap
v3:
Reduce limit of signal events back to 256 per process
Fix allocation of kernel memory for signal events
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Andrew Lewycky [Wed, 16 Jul 2014 22:37:30 +0000 (01:37 +0300)]
drm/amdkfd: Add interrupt handling module
This patch adds the interrupt handling module, kfd_interrupt.c, and its
related members in different data structures to the amdkfd driver.
The amdkfd interrupt module maintains an internal interrupt ring
per amdkfd device. The internal interrupt ring contains interrupts
that needs further handling. The extra handling is deferred to
a later time through a workqueue.
There's no acknowledgment for the interrupts we use. The hardware
simply queues a new interrupt each time without waiting.
The fixed-size internal queue means that it's possible for us to lose
interrupts because we have no back-pressure to the hardware.
However, only interrupts that are "wanted" by amdkfd, are copied into
the amdkfd s/w interrupt ring, in order to minimize the chances
for overflow of the ring.
Signed-off-by: Andrew Lewycky <Andrew.Lewycky@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay [Thu, 5 Mar 2015 13:13:18 +0000 (15:13 +0200)]
drm/radeon: Add init interrupt kfd->kgd interface
This patch adds a new interface function to the kfd->kgd interface.
The function is kgd_init_interrupts() and its function is to
initialize a pipe's interrupts.
The function currently enables the timestamp interrupt and the
bad opcode interrupt.
projects / linux-beck.git / log