Dan Carpenter [Mon, 18 Mar 2013 20:25:26 +0000 (20:25 +0000)]
IB/ipath: Silence a static checker warning
I have a static checker which complains that 0x255 is too high for
the "dev->opstats[opcode]" array. It turns out that the hardware
has already validated the opcode at this point so it can't actually
overflow.
However, silencing the warning is good and this matches how the
opcode is treated in qib_ib_rcv() as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
Mike Marciniszyn [Tue, 26 Feb 2013 15:46:27 +0000 (15:46 +0000)]
IPoIB: Fix send lockup due to missed TX completion
Commit f0dc117abdfa ("IPoIB: Fix TX queue lockup with mixed UD/CM
traffic") attempts to solve an issue where unprocessed UD send
completions can deadlock the netdev.
The patch doesn't fully resolve the issue because if more than half
the tx_outstanding's were UD and all of the destinations are RC
reachable, arming the CQ doesn't solve the issue.
This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the
ib_req_notify_cq(). If the rc is above 0, the UD send cq completion
callback is called directly to re-arm the send completion timer.
This issue is seen in very large parallel filesystem deployments
and the patch has been shown to correct the issue.
Cc: <stable@vger.kernel.org> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
David Rientjes [Sun, 17 Mar 2013 22:49:10 +0000 (15:49 -0700)]
perf,x86: fix link failure for non-Intel configs
Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:
arch/x86/power/built-in.o: In function `restore_processor_state':
(.text+0x45c): undefined reference to `perf_restore_debug_store'
Fix it by defining the dummy function appropriately.
Signed-off-by: David Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 Mar 2013 22:44:43 +0000 (15:44 -0700)]
perf,x86: fix wrmsr_on_cpu() warning on suspend/resume
Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.
init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update. Which is not really valid at the
early resume stage, and the warning is quite reasonable. Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.
This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.
Linus Torvalds [Sun, 17 Mar 2013 18:04:14 +0000 (11:04 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Eric's rcu barrier patch fixes a long standing problem with our
unmount code hanging on to devices in workqueue helpers. Liu Bo
nailed down a difficult assertion for in-memory extent mappings."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix warning of free_extent_map
Btrfs: fix warning when creating snapshots
Btrfs: return as soon as possible when edquot happens
Btrfs: return EIO if we have extent tree corruption
btrfs: use rcu_barrier() to wait for bdev puts at unmount
Btrfs: remove btrfs_try_spin_lock
Btrfs: get better concurrency for snapshot-aware defrag work
Liu Bo [Fri, 15 Mar 2013 14:46:39 +0000 (08:46 -0600)]
Btrfs: fix warning of free_extent_map
Users report that an extent map's list is still linked when it's actually
going to be freed from cache.
The story is that
a) when we're going to drop an extent map and may split this large one into
smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means
that it's on the list to be logged, then the smaller ems split from it will also
be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected.
b) we'll keep ems from unlinking the list and freeing when they are flagged with
EXTENT_FLAG_LOGGING, because the log code holds one reference.
The end result is the warning, but the truth is that we set the flag
EXTENT_FLAG_LOGGING only during fsync.
So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one.
Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Linus Torvalds [Sat, 16 Mar 2013 01:06:55 +0000 (18:06 -0700)]
Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
"One fix for for make headers_install/headers_check to not require make
3.81. The requirement has been accidentally introduced in 3.7."
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: fix make headers_check with make 3.80
Linus Torvalds [Sat, 16 Mar 2013 01:05:37 +0000 (18:05 -0700)]
Merge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux
Pull OpenRISC bug fixes from Jonas Bonn:
- The GPIO descriptor work has exposed how broken the non-GPIOLIB bits
for OpenRISC were. We now require GPIOLIB as this is the preferred
way forward.
- The system.h split introduced a bug in llist.h for arches using
asm-generic/cmpxchg.h directly, which is currently only OpenRISC.
The patch here moves two defines from asm-generic/atomic.h to
asm-generic/cmpxchg.h to make things work as they should.
- The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does
not have the virt_to_bus methods, so there's a patch to remove it
again.
* tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux:
openrisc: remove HAVE_VIRT_TO_BUS
asm-generic: move cmpxchg*_local defs to cmpxchg.h
openrisc: require gpiolib
Linus Torvalds [Sat, 16 Mar 2013 01:04:38 +0000 (18:04 -0700)]
Merge tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg Kroah-Hartman:
"Here are some tiny fixes for the w1 drivers and the final removal
patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now
gone from your tree, this just drops the Kconfig item itself.)
All have been in the linux-next tree for a while"
* tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
final removal of CONFIG_EXPERIMENTAL
w1: fix oops when w1_search is called from netlink connector
w1-gpio: fix unused variable warning
w1-gpio: remove erroneous __exit and __exit_p()
ARM: w1-gpio: fix erroneous gpio requests
Linus Torvalds [Sat, 16 Mar 2013 00:35:49 +0000 (17:35 -0700)]
Merge tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, as expected for the middle rc:
- A couple of fixes for potential NULL dereferences and out-of-range
array accesses revealed by static code parsers
- A fix for the wrong error handling detected by trinity
- A regression fix for missing audio on some MacBooks
- CA0132 DSP loader fixes
- Fix for EAPD control of IDT codecs on machines w/o speaker
- Fix a regression in the HD-audio widget list parser code
- Workaround for the NuForce UDH-100 USB audio"
* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
sound: sequencer: cap array index in seq_chn_common_event()
ALSA: hda/ca0132 - Remove extra setting of dsp_state.
ALSA: hda/ca0132 - Check download state of DSP.
ALSA: hda/ca0132 - Check if dspload_image succeeded.
ALSA: hda - Disable IDT eapd_switch if there are no internal speakers
ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value
ALSA: usb-audio: add a workaround for the NuForce UDH-100
ALSA: asihpi - fix potential NULL pointer dereference
ALSA: seq: Fix missing error handling in snd_seq_timer_open()
Linus Torvalds [Sat, 16 Mar 2013 00:35:03 +0000 (17:35 -0700)]
Merge branch 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping fix from Marek Szyprowski:
"An important fix for all ARM architectures which use ZONE_DMA.
Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated
buffers outsize DMA zone."
* 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
Linus Torvalds [Sat, 16 Mar 2013 00:34:01 +0000 (17:34 -0700)]
Merge tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes
Pull MFD fixes from Samuel Ortiz:
"This is the first batch of MFD fixes for 3.9.
With this one we have:
- An ab8500 build failure fix.
- An ab8500 device tree parsing fix.
- A fix for twl4030_madc remove routine to work properly (when
built-in).
- A fix for properly registering palmas interrupt handler.
- A fix for omap-usb init routine to actually write into the
hostconfig register.
- A couple of warning fixes for ab8500-gpadc and tps65912"
* tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
mfd: twl4030-madc: Remove __exit_p annotation
mfd: ab8500: Kill "reg" property from binding
mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO
mfd: wm831x: Don't forward declare enum wm831x_auxadc
mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()
mfd: tps65912: Declare and use tps65912_irq_exit()
mfd: palmas: Provide irq flags through DT/platform data
mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error
mfd: omap-usb-host: Actually update hostconfig
Linus Torvalds [Sat, 16 Mar 2013 00:33:13 +0000 (17:33 -0700)]
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Bug fixes for pmbus, ltc2978, and lineage-pem drivers
Added specific maintainer for some hwmon drivers"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ltc2978) Fix temperature reporting
hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers
Stephane Eranian [Fri, 15 Mar 2013 13:26:07 +0000 (14:26 +0100)]
perf,x86: fix kernel crash with PEBS/BTS after suspend/resume
This patch fixes a kernel crash when using precise sampling (PEBS)
after a suspend/resume. Turns out the CPU notifier code is not invoked
on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly
by the kernel and keeps it power-on/resume value of 0 causing any PEBS
measurement to crash when running on CPU0.
The workaround is to add a hook in the actual resume code to restore
the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0,
the DS_AREA will be restored twice but this is harmless.
Takashi Iwai [Fri, 15 Mar 2013 13:23:32 +0000 (14:23 +0100)]
ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
During the transition to the generic parser, the hook to the codec
specific automute function was forgotten. This resulted in the silent
output on some MacBooks.
Dan Carpenter [Fri, 15 Mar 2013 06:14:22 +0000 (09:14 +0300)]
sound: sequencer: cap array index in seq_chn_common_event()
"chn" here is a number between 0 and 255, but ->chn_info[] only has
16 elements so there is a potential write beyond the end of the
array.
If the seq_mode isn't SEQ_2 then we let the individual drivers
(either opl3.c or midi_synth.c) handle it. Those functions all
do a bounds check on "chn" so I haven't changed anything here.
The opl3.c driver has up to 18 channels and not 16.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arnd Bergmann [Thu, 14 Mar 2013 21:56:38 +0000 (22:56 +0100)]
mfd: twl4030-madc: Remove __exit_p annotation
4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation
on the twl4030_madc_remove function, but left an __exit_p() present on the
pointer to this function. Using __exit_p was as wrong with the devexit in
place as it is now, but now we get a gcc warning about an unused function.
In order for the twl4030_madc_remove to work correctly in built-in code, we
have to remove the __exit_p.
Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Dylan Reid [Fri, 15 Mar 2013 00:27:45 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Check download state of DSP.
Instead of using the dspload_is_loaded() function, check the dsp_state
that is kept in the spec. The dspload_is_loaded() function returns
true if the DSP transfer was never started. This false-positive leads
to multiple second delays when ca0132_setup_efaults() times out on
each write.
Dylan Reid [Fri, 15 Mar 2013 00:27:44 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Check if dspload_image succeeded.
If dspload_image() fails, it was ignored and dspload_wait_loaded() was
still called. dsp_loaded should never be set to true in this case,
skip it. The check in dspload_wait_loaded() return true if the DSP is
loaded or if it never started.
The vm_flags introduced in 6d7825b10dbe ("mm/fremap.c: fix oops on error
path") is supposed to avoid a compiler warning about unitialized
vm_flags without changing the generated code.
However I am concerned that this is going to be very brittle, and fail
with some compiler versions. The failure could be either of:
- compiler could actually load vma->vm_flags before checking for the
!vma condition, thus reintroducing the oops
- compiler could optimize out the !vma check, since the pointer just got
dereferenced shortly before (so the compiler knows it can't be NULL!)
I propose reversing this part of the change and initializing vm_flags to 0
just to avoid the bogus uninitialized use warning.
Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Mar 2013 21:53:07 +0000 (14:53 -0700)]
Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull fix for hlist_entry_safe() regression from Paul McKenney:
"This contains a single commit that fixes a regression in
hlist_entry_safe(). This macro references its argument twice, which
can cause NULL-pointer errors. This commit applies a gcc statement
expression, creating a temporary variable to avoid the double
reference. This has been posted to LKML at
https://lkml.org/lkml/2013/3/9/75.
Kudos to CAI Qian, whose testing uncovered this, to Eric Dumazet, who
spotted root cause, and to Li Zefan, who tested this commit."
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
list: Fix double fetch of pointer in hlist_entry_safe()
list: Fix double fetch of pointer in hlist_entry_safe()
The current version of hlist_entry_safe() fetches the pointer twice,
once to test for NULL and the other to compute the offset back to the
enclosing structure. This is OK for normal lock-based use because in
that case, the pointer cannot change. However, when the pointer is
protected by RCU (as in "rcu_dereference(p)"), then the pointer can
change at any time. This use case can result in the following sequence
of events:
1. CPU 0 invokes hlist_entry_safe(), fetches the RCU-protected
pointer as sees that it is non-NULL.
2. CPU 1 invokes hlist_del_rcu(), deleting the entry that CPU 0
just fetched a pointer to. Because this is the last entry
in the list, the pointer fetched by CPU 0 is now NULL.
3. CPU 0 refetches the pointer, obtains NULL, and then gets a
NULL-pointer crash.
This commit therefore applies gcc's "({ })" statement expression to
create a temporary variable so that the specified pointer is fetched
only once, avoiding the above sequence of events. Please note that
it is the caller's responsibility to use rcu_dereference() as needed.
This allows RCU-protected uses to work correctly without imposing
any additional overhead on the non-RCU case.
Many thanks to Eric Dumazet for spotting root cause!
Reported-by: CAI Qian <caiqian@redhat.com> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Li Zefan <lizefan@huawei.com>
Linus Torvalds [Thu, 14 Mar 2013 19:11:28 +0000 (12:11 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, ext3, reiserfs, quota fixes from Jan Kara:
"A fix for regression in ext2, and a format string issue in ext3. The
rest isn't too serious."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix BUG_ON in evict() on inode deletion
reiserfs: Use kstrdup instead of kmalloc/strcpy
ext3: Fix format string issues
quota: add missing use of dq_data_lock in __dquot_initialize
Liu Bo [Wed, 13 Mar 2013 13:43:03 +0000 (07:43 -0600)]
Btrfs: fix warning when creating snapshots
Creating snapshot passes extent_root to commit its transaction,
but it can lead to the warning of checking root for quota in
the __btrfs_end_transaction() when someone else is committing
the current transaction. Since we've recorded the needed root
in trans_handle, just use it to get rid of the warning.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Wang Shilong [Wed, 6 Mar 2013 11:51:47 +0000 (11:51 +0000)]
Btrfs: return as soon as possible when edquot happens
If one of qgroup fails to reserve firstly, we should return immediately,
it is unnecessary to continue check.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 8 Mar 2013 20:41:02 +0000 (15:41 -0500)]
Btrfs: return EIO if we have extent tree corruption
The callers of lookup_inline_extent_info all handle getting an error back
properly, so return an error if we have corruption instead of being a jerk and
panicing. Still WARN_ON() since this is kind of crucial and I've been seeing it
a bit too much recently for my taste, I think we're doing something wrong
somewhere. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Eric Sandeen [Sat, 9 Mar 2013 15:18:39 +0000 (15:18 +0000)]
btrfs: use rcu_barrier() to wait for bdev puts at unmount
Doing this would reliably fail with -EBUSY for me:
# mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2
...
unable to open /dev/sdb2: Device or resource busy
because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it.
Using systemtap to track bdev gets & puts shows a kworker thread doing a
blkdev put after mkfs attempts a get; this is left over from the unmount
path:
so unmount might complete before __free_device fires & does its blkdev_put.
Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait
until all blkdev_put()s are done, and the device is truly free once
unmount completes.
Cc: stable@vger.kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Guenter Roeck [Thu, 21 Feb 2013 18:27:54 +0000 (10:27 -0800)]
hwmon: (pmbus/ltc2978) Fix temperature reporting
On LTC2978, only READ_TEMPERATURE is supported. It reports
the internal junction temperature. This register is unpaged.
On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported.
READ_TEMPERATURE is paged and reports external temperatures.
READ_TEMPERATURE2 is unpaged and reports the internal junction
temperature.
Axel Lin [Thu, 14 Mar 2013 08:27:18 +0000 (16:27 +0800)]
hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: stable@vger.kernel.org Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Marek Szyprowski [Tue, 26 Feb 2013 06:46:24 +0000 (07:46 +0100)]
ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
Atomic pool should always be allocated from DMA zone if such zone is
available in the system to avoid issues caused by limited dma mask of
any of the devices used for making an atomic allocation.
Reported-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Stable <stable@vger.kernel.org> [v3.6+]
Linus Torvalds [Wed, 13 Mar 2013 22:47:50 +0000 (15:47 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace bugfixes from Eric Biederman:
"This tree includes a partial revert for "fs: Limit sys_mount to only
request filesystem modules." When I added the new style module aliases
to the filesystems I deleted the old ones. A bad move. It turns out
that distributions like Arch linux use module aliases when
constructing ramdisks. Which meant ultimately that an ext3 filesystem
mounted with ext4 would not result in the ext4 module being put into
the ramdisk.
The other change in this tree adds a handful of filesystem module
alias I simply failed to add the first time. Which inconvinienced a
few folks using cifs.
I don't want to inconvinience folks any longer than I have to so here
are these trivial fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
fs: Readd the fs module aliases.
fs: Limit sys_mount to only request filesystem modules. (Part 3)
Tejun Heo [Wed, 13 Mar 2013 21:59:49 +0000 (14:59 -0700)]
idr: idr_alloc() shouldn't trigger lowmem warning when preloaded
GFP_NOIO is often used for idr_alloc() inside preloaded section as the
allocation mask doesn't really matter. If the idr tree needs to be
expanded, idr_alloc() first tries to allocate using the specified
allocation mask and if it fails falls back to the preloaded buffer. This
order prevent non-preloading idr_alloc() users from taking advantage of
preloading ones by using preload buffer without filling it shifting the
burden of allocation to the preload users.
Unfortunately, this allowed/expected-to-fail kmem_cache allocation ends up
generating spurious slab lowmem warning before succeeding the request from
the preload buffer.
This patch makes idr_layer_alloc() add __GFP_NOWARN to the first
kmem_cache attempt and try kmem_cache again w/o __GFP_NOWARN after
allocation from preload_buffer fails so that lowmem warning is generated
if not suppressed by the original @gfp_mask.
Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Teigland <teigland@redhat.com> Tested-by: David Teigland <teigland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:48 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in M32R's asm/stat.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of struct stat64 in M32R's asm/stat.h is wrong in this way.
Note that userspace will likely interpret the field order incorrectly as
the big-endian variant on little-endian machines - depending on header
inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the ordering of st_blocks and __pad4 in struct stat64.
Signed-off-by: David Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:47 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/raid/md_p.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of struct mdp_superblock_s in linux/raid/md_p.h is wrong in
this way. Note that userspace will likely interpret the ordering of the
fields incorrectly as the big-endian variant on a little-endian machines -
depending on header inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the ordering of events_hi, events_lo, cp_events_hi and
cp_events_lo in struct mdp_superblock_s / typedef mdp_super_t.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:46 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/acct.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of ACCT_BYTEORDER in linux/acct.h is wrong in this way.
Note that userspace will likely interpret this incorrectly as the
big-endian variant on little-endian machines - depending on header
inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the value of ACCT_BYTEORDER.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:45 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/aio_abi.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of PADDED() in linux/aio_abi.h is wrong in this way. Note
that userspace will likely interpret this and thus the order of fields in
struct iocb incorrectly as the little-endian variant on big-endian
machines - depending on header inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the ordering of aio_key and aio_reserved1 in struct iocb.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:42 +0000 (14:59 -0700)]
idr: deprecate idr_pre_get() and idr_get_new[_above]()
Now that all in-kernel users are converted to ues the new alloc
interface, mark the old interface deprecated. We should be able to
remove these in a few releases.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:41 +0000 (14:59 -0700)]
tidspbridge: convert to idr_alloc()
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
There are some peculiarities and possible bugs in the converted
functions. This patch preserves those.
* drv_insert_node_res_element() returns -ENOMEM on alloc failure,
-EFAULT if id space is exhausted. -EFAULT is at best misleading.
* drv_proc_insert_strm_res_element() is even weirder. It returns
-EFAULT if kzalloc() fails, -ENOMEM if idr preloading fails and
-EPERM if id space is exhausted. What's going on here?
* drv_proc_insert_strm_res_element() doesn't free *pstrm_res after
failure.
Tejun Heo [Wed, 13 Mar 2013 21:59:39 +0000 (14:59 -0700)]
mlx4: remove leftover idr_pre_get() call
Commit 6a9200603d76 ("IB/mlx4: convert to idr_alloc()") forgot to remove
idr_pre_get() call in mlx4_ib_cm_paravirt_init(). It's unnecessary and
idr_pre_get() will soon be deprecated. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:37 +0000 (14:59 -0700)]
nfsd: convert to idr_alloc()
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
Only compile-tested.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: J. Bruce Fields <bfields@redhat.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Wed, 13 Mar 2013 21:59:33 +0000 (14:59 -0700)]
signal: always clear sa_restorer on execve
When the new signal handlers are set up, the location of sa_restorer is
not cleared, leaking a parent process's address space location to
children. This allows for a potential bypass of the parent's ASLR by
examining the sa_restorer value returned when calling sigaction().
Based on what should be considered "secret" about addresses, it only
matters across the exec not the fork (since the VMAs haven't changed
until the exec). But since exec sets SIG_DFL and keeps sa_restorer,
this is where it should be fixed.
Given the few uses of sa_restorer, a "set" function was not written
since this would be the only use. Instead, we use
__ARCH_HAS_SA_RESTORER, as already done in other places.
Toshi Kani [Wed, 13 Mar 2013 21:59:31 +0000 (14:59 -0700)]
mm: remove_memory(): fix end_pfn setting
remove_memory() calls walk_memory_range() with [start_pfn, end_pfn), where
end_pfn is exclusive in this range. Therefore, end_pfn needs to be set to
the next page of the end address.
Andrew Morton [Wed, 13 Mar 2013 21:59:30 +0000 (14:59 -0700)]
include/linux/res_counter.h needs errno.h
alpha allmodconfig:
In file included from mm/memcontrol.c:28:
include/linux/res_counter.h: In function 'res_counter_set_limit':
include/linux/res_counter.h:203: error: 'EBUSY' undeclared (first use in this function)
include/linux/res_counter.h:203: error: (Each undeclared identifier is reported only once
include/linux/res_counter.h:203: error: for each function it appears in.)
Linus Torvalds [Wed, 13 Mar 2013 22:03:48 +0000 (15:03 -0700)]
Merge tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a number of tiny USB fixes and new USB device ids for your
3.9 tree.
The "largest" one here is a revert of a usb-storage patch that turned
out to be incorrect, breaking existing users, which is never a good
thing. Everything else is pretty simple and small"
* tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
USB: quatech2: only write to the tty if the port is open.
qcserial: bind to DM/DIAG port on Gobi 1K devices
USB: cdc-wdm: fix buffer overflow
usb: serial: Add Rigblaster Advantage to device table
qcaux: add Franklin U600
usb: musb: core: fix possible build error with randconfig
usb: cp210x new Vendor/Device IDs
usb: gadget: pxa25x: fix disconnect reporting
usb: dwc3: ep0: fix sparc64 build
usb: c67x00 RetryCnt value in c67x00 TD should be 3
usb: Correction to c67x00 TD data length mask
usb: Makefile: fix drivers/usb/phy/ Makefile entry
USB: added support for Cinterion's products AH6 and PLS8
usb: gadget: fix omap_udc build errors
USB: storage: fix Huawei mode switching regression
USB: storage: in-kernel modeswitching is deprecated
tools: usb: ffs-test: Fix build failure
USB: option: add Huawei E5331
usb: musb: omap2430: fix sparse warning
usb: musb: omap2430: fix omap_musb_mailbox glue check again
...
Linus Torvalds [Wed, 13 Mar 2013 22:02:02 +0000 (15:02 -0700)]
Merge tag 'tty-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg Kroah-Hartman:
"Here are some tty/serial driver fixes for 3.9
We finally mute the annoying WARN_ON that lots of people are hitting
and it turns out isn't needed anymore. Also add a few new device ids
and a some other minor fixes."
* tag 'tty-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fix typo "SERIAL_S3C2412"
serial: 8250: Keep 8250.<xxxx> module options functional after driver rename
tty: serial: fix typo "ARCH_S5P6450"
tty/8250_pnp: serial port detection regression since v3.7
serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char"
serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller
Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards
tty/serial: Add support for Altera serial port
tty: serial: vt8500: Unneccessary duplicated clock code removed
tty: serial: mpc5xxx: fix PSC clock name bug
TTY: disable debugging warning
Linus Torvalds [Wed, 13 Mar 2013 22:01:08 +0000 (15:01 -0700)]
Merge tag 'staging-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg Kroah-Hartman:
"Here are some drivers/staging and drivers/iio fixes for 3.9 (the two
are still pretty intertwined, hence them coming both from my tree
still.) Nothing major, just a few things that have been reported by
users, all of these have been in linux-next for a while."
* tag 'staging-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: dt9812: use CR_CHAN() for channel number
staging/vt6656: Fix too large integer constant warning on 32-bit
staging: comedi: drivers: usbduxsigma.c: fix DMA buffers on stack
staging: imx/drm: request irq only after adding the crtc
staging: comedi: drivers: usbduxfast.c: fix for DMA buffers on stack
staging: comedi: drivers: usbdux.c: fix DMA buffers on stack
staging: vt6656: Fix oops on resume from suspend.
iio:common:st_sensors fixed all warning messages about uninitialized variables
iio: Fix build error seen if IIO_TRIGGER is defined but IIO_BUFFER is not
iio/imu: inv_mpu6050 depends on IIO_BUFFER
iio:ad5064: Initialize register cache correctly
iio:ad5064: Fix off by one in DAC value range check
iio:ad5064: Fix address of the second channel for ad5065/ad5045/ad5025
Don't allowing sharing the root directory with processes in a
different user namespace. There doesn't seem to be any point, and to
allow it would require the overhead of putting a user namespace
reference in fs_struct (for permission checks) and incrementing that
reference count on practically every call to fork.
So just perform the inexpensive test of forbidding sharing fs_struct
acrosss processes in different user namespaces. We already disallow
other forms of threading when unsharing a user namespace so this
should be no real burden in practice.
This updates setns, clone, and unshare to disallow multiple user
namespaces sharing an fs_struct.
Bill Pemberton [Wed, 13 Mar 2013 13:50:15 +0000 (09:50 -0400)]
USB: quatech2: only write to the tty if the port is open.
The commit 2e124b4a390ca85325fae75764bef92f0547fa25 removed the checks
that prevented qt2_process_read_urb() from trying to put chars into
ttys that weren't actually opened. This resulted in 'tty is NULL'
warnings from flush_to_ldisc() when the device was used.
The devices use just one read urb for all ports. As a result
qt2_process_read_urb() may be called with the current port set to a
port number that has not been opened. Add a check if the port is open
before calling tty_flip_buffer_push().
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Wed, 13 Mar 2013 11:57:08 +0000 (12:57 +0100)]
ext2: Fix BUG_ON in evict() on inode deletion
Commit 8e3dffc6 introduced a regression where deleting inode with
large extended attributes leads to triggering
BUG_ON(inode->i_state != (I_FREEING | I_CLEAR))
in fs/inode.c:evict(). That happens because freeing of xattr block
dirtied the inode and it happened after clear_inode() has been called.
Fix the issue by moving removal of xattr block into ext2_evict_inode()
before clear_inode() call close to a place where data blocks are
truncated. That is also more logical place and removes surprising
requirement that ext2_free_blocks() mustn't dirty the inode.
Reported-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz>
Jonas Bonn [Thu, 28 Feb 2013 05:37:05 +0000 (06:37 +0100)]
asm-generic: move cmpxchg*_local defs to cmpxchg.h
asm/cmpxchg.h can be included on its own and needs to be self-consistent.
The definitions for the cmpxchg*_local macros, as such, need to be part
of this file.
This fixes a build issue on OpenRISC since the system.h smashing patch 96f951edb1f1bdbbc99b0cd458f9808bb83d58ae that introdued the direct inclusion
asm/cmpxchg.h into linux/llist.h.
CC: David Howells <dhowells@redhat.com> Signed-off-by: Jonas Bonn <jonas@southpole.se> Acked-by: Arnd Bergmann <arnd@arndb.de>
Jonas Bonn [Thu, 28 Feb 2013 05:55:22 +0000 (06:55 +0100)]
openrisc: require gpiolib
The recent move to GPIO descriptors breaks the OpenRISC build. Requiring
gpiolib resolves this; using gpiolib exclusively is also the recommended
way forward for all arches by the developers working on these GPIO changes.
The non-gpiolib implementation for OpenRISC never worked anyway...
Randy Dunlap [Mon, 4 Mar 2013 22:32:59 +0000 (14:32 -0800)]
signals: fix new kernel-doc warnings
Fix new kernel-doc warnings in kernel/signal.c:
Warning(kernel/signal.c:2689): No description found for parameter 'uset'
Warning(kernel/signal.c:2689): Excess function parameter 'set' description in 'sys_rt_sigpending'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Mon, 4 Mar 2013 22:32:54 +0000 (14:32 -0800)]
idr: fix new kernel-doc warnings
Fix new kernel-doc warnings in idr:
Warning(include/linux/idr.h:113): No description found for parameter 'idr'
Warning(include/linux/idr.h:113): Excess function parameter 'idp' description in 'idr_find'
Warning(lib/idr.c:232): Excess function parameter 'id' description in 'sub_alloc'
Warning(lib/idr.c:232): Excess function parameter 'id' description in 'sub_alloc'
Linus Torvalds [Wed, 13 Mar 2013 03:25:53 +0000 (20:25 -0700)]
Merge tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
- Compile warnings and errors (one on x86, two on ARM)
- WARNING in xen-pciback
- Use the acpi_processor_get_performance_info instead of the 'register'
version
* tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/acpi: remove redundant acpi/acpi_drivers.h include
xen: arm: mandate EABI and use generic atomic operations.
acpi: Export the acpi_processor_get_performance_info
xen/pciback: Don't disable a PCI device that is already disabled.
I had assumed that the only use of module aliases for filesystems
prior to "fs: Limit sys_mount to only request filesystem modules."
was in request_module. It turns out I was wrong. At least mkinitcpio
in Arch linux uses these aliases.
So readd the preexising aliases, to keep from breaking userspace.
Userspace eventually will have to follow and use the same aliases the
kernel does. So at some point we may be delete these aliases without
problems. However that day is not today.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Oliver Neukum [Tue, 12 Mar 2013 13:52:42 +0000 (14:52 +0100)]
USB: cdc-wdm: fix buffer overflow
The buffer for responses must not overflow.
If this would happen, set a flag, drop the data and return
an error after user space has read all remaining data.
Signed-off-by: Oliver Neukum <oliver@neukum.org> CC: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Good job. I was too lazy to bisect for bad commit;)
Reading the code I found problematic kthread_should_stop call from netlink
connector which causes the oops. After applying a patch, I've been testing
owfs+w1 setup for nearly two days and it seems to work very reliable (no
hangs, no memleaks etc).
More detailed description and possible fix is given below:
Function w1_search can be called from either kthread or netlink callback.
While the former works fine, the latter causes oops due to kthread_should_stop
invocation.
This patch adds a check if w1_search is serving netlink command, skipping
kthread_should_stop invocation if so.
Johan Hovold [Fri, 8 Mar 2013 10:08:00 +0000 (11:08 +0100)]
w1-gpio: fix unused variable warning
Commit 8a1861d997 ("w1-gpio: Simplify & get rid of defines") removed the
compile guards from the device-tree id table, thereby generating a
warning when building without device-tree support.
Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 8 Mar 2013 10:07:59 +0000 (11:07 +0100)]
w1-gpio: remove erroneous __exit and __exit_p()
Commit 8a1861d997 ("w1-gpio: Simplify & get rid of defines") changed
(apparently unknowingly) the driver to a hotpluggable platform-device
driver but did not not update the section markers for probe and remove
(to __devinit/exit, which have since been removed). A later commit fixed
the section mismatch for probe, but left remove marked with __exit.
Johan Hovold [Tue, 12 Mar 2013 19:21:34 +0000 (20:21 +0100)]
ARM: w1-gpio: fix erroneous gpio requests
Fix regression introduced by commit d2323cf773 ("onewire: w1-gpio: add
ext_pullup_enable pin in platform data") which added a gpio entry to the
platform data, but did not add the required initialisers to the board
files using it. Consequently, the driver would request gpio 0 at probe,
which could break other uses of the corresponding pin.
On AT91 requesting gpio 0 changes the pin muxing for PIOA0, which, for
instance, breaks SPI0 on at91sam9g20.
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed. I am not sure what I was thinking. Instead, just directly
select VIRT_TO_BUS where it is needed.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys
Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to
compat_process_vm_rw() shows that the compatibility code requires an
explicit "access_ok()" check before calling
compat_rw_copy_check_uvector(). The same difference seems to appear when
we compare fs/read_write.c:do_readv_writev() to
fs/compat.c:compat_do_readv_writev().
This subtle difference between the compat and non-compat requirements
should probably be debated, as it seems to be error-prone. In fact,
there are two others sites that use this function in the Linux kernel,
and they both seem to get it wrong:
Now shifting our attention to fs/aio.c, we see that aio_setup_iocb()
also ends up calling compat_rw_copy_check_uvector() through
aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to
be missing. Same situation for
security/keys/compat.c:compat_keyctl_instantiate_key_iov().
I propose that we add the access_ok() check directly into
compat_rw_copy_check_uvector(), so callers don't have to worry about it,
and it therefore makes the compat call code similar to its non-compat
counterpart. Place the access_ok() check in the same location where
copy_from_user() can trigger a -EFAULT error in the non-compat code, so
the ABI behaviors are alike on both compat and non-compat.
While we are here, fix compat_do_readv_writev() so it checks for
compat_rw_copy_check_uvector() negative return values.
And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error
handling.
Linus Torvalds [Tue, 12 Mar 2013 17:37:14 +0000 (10:37 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm nouveau fixes from Dave Airlie:
"This is just nouveau fixes from Ben, one fixes a nasty oops that some
Fedora people have been seeing, so I'd like to get it out of the way."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nv50: use correct tiling methods for m2mf buffer moves
drm/nouveau: idle channel before releasing notify object
drm/nouveau: fix regression in vblanking
drm/nv50: encoder creation failure doesn't mean full init failure
Linus Torvalds [Tue, 12 Mar 2013 17:21:38 +0000 (10:21 -0700)]
Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"These bug fixes are for the largest part for mvebu/kirkwood, which saw
a few regressions after the clock infrastructure was enabled, and for
OMAP, which showed a few more preexisting bugs with the new
multiplatform support.
Other small fixes are for imx, mxs, tegra, spear and socfpga"
* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: spear3xx: Use correct pl080 header file
Arm: socfpga: pl330: Add #dma-cells for generic dma binding support
ARM: multiplatform: Sort the max gpio numbers.
ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART"
ARM: imx: pll1_sys should be an initial on clk
arm: mach-orion5x: fix typo in compatible string of a .dts file
arm: mvebu: fix address-cells in mpic DT node
arm: plat-orion: fix address decoding when > 4GB is used
arm: mvebu: Reduce reg-io-width with UARTs
ARM: Dove: add RTC device node
arm: mvebu: enable the USB ports on Armada 370 Reference Design board
ARM: dove: drop "select COMMON_CLK_DOVE"
rtc: rtc-mv: Add support for clk to avoid lockups
gpio: mvebu: Add clk support to prevent lockup
ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels
ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency
ARM: mxs: cfa10049: Fix fb initialisation function
ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
ARM: OMAP: RX-51: add missing USB phy binding
clk: Tegra: Remove duplicate smp_twd clock
...
Linus Torvalds [Tue, 12 Mar 2013 17:20:15 +0000 (10:20 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fixes from Greg Ungerer:
"It contains a few small fixes for the non-MMU m68k platforms. Fixes
some compilation problems, some broken header definitions, removes an
unused config option and adds a name for the old 68000 CPU support."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: drop "select EMAC_INC"
m68knommu: fix misnamed GPIO pin definition for ColdFire 528x CPU
m68knommu: fix MC68328.h defines
m68knommu: fix build when CPU is not coldfire
m68knommu: add CPU_NAME for 68000
Linus Torvalds [Tue, 12 Mar 2013 16:20:58 +0000 (09:20 -0700)]
Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
"Some minor fallout from the user-namespace work broke most krb5 mounts
to nfsd, and I screwed up a change to the AF_LOCAL rpc code."
* 'for-3.9' of git://linux-nfs.org/~bfields/linux:
sunrpc: don't attempt to cancel unitialized work
nfsd: fix krb5 handling of anonymous principals
Steve Conklin [Thu, 7 Mar 2013 23:19:33 +0000 (17:19 -0600)]
usb: serial: Add Rigblaster Advantage to device table
The Rigblaster Advantage is an amateur radio interface sold by West Mountain
Radio. It contains a cp210x serial interface but the device ID is not in
the driver.
Paul Bolle [Tue, 12 Mar 2013 09:10:32 +0000 (10:10 +0100)]
tty: serial: fix typo "SERIAL_S3C2412"
The Kconfig symbol SERIAL_S3C2412 got removed in commit da121506eb03ee5daea55404709110b798bd61d9 ("serial: samsung: merge
probe() function from all SoC specific extensions"). But it also added a
last reference to that symbol. The commit and the tree make clear that
CPU_S3C2412 should have been used instead.
Josh Boyer [Sun, 10 Mar 2013 14:33:40 +0000 (10:33 -0400)]
serial: 8250: Keep 8250.<xxxx> module options functional after driver rename
With commit 835d844d1 (8250_pnp: do pnp probe before legacy probe), the
8250 driver was renamed to 8250_core. This means any existing usage of
the 8259.<xxxx> module parameters or as a kernel command line switch is
now broken, as the 8250_core driver doesn't parse options belonging to
something called "8250".
To solve this, we redefine the module options in a dummy function using
a redefined MODULE_PARAM_PREFX when built into the kernel. In the case
where we're building as a module, we provide an alias to the old 8250
name. The dummy function prevents compiler errors due to global variable
redefinitions that happen as part of the module_param_ macro expansions.
Paul Bolle [Sat, 9 Mar 2013 22:16:44 +0000 (23:16 +0100)]
tty: serial: fix typo "ARCH_S5P6450"
This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at
commit 2555e663b367b8d555e76023f4de3f6338c28d6c ("ARM: S5P64X0: Add UART
serial support for S5P6450") - which added this typo - makes clear this
should be CPU_S5P6450.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Fri, 22 Feb 2013 16:27:19 +0000 (16:27 +0000)]
tty/8250_pnp: serial port detection regression since v3.7
The InsydeH2O BIOS (version dated 09/12/2011) has the following in
its pnp resouces for its serial ports:
$ cat /sys/bus/pnp/devices/00:0b/resources
state = active
io disabled
irq disabled
We do not check if the resources are disabled, and create a bogus
ttyS* device. Since commit 835d844d1a28e (8250_pnp: do pnp probe
before legacy probe) we get a bogus ttyS0, which prevents the legacy
probe from detecting it.
Note, the BIOS can also be upgraded, fixing this problem, but for people
who can't do that, this fix is needed.
Reported-by: Vincent Deffontaines <vincent@gryzor.com> Tested-by: Vincent Deffontaines <vincent@gryzor.com> Signed-off-by: Sean Young <sean@mess.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonas Gorski [Sun, 24 Feb 2013 13:08:39 +0000 (14:08 +0100)]
serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char"
92a19f9cec9a80ad93c06e115822deb729e2c6ad introduced a local variable
with the same name as the argument to bcm_uart_do_rx, breaking
compilation. Fix this by renaming the new variable and its uses where
expected.
Looking back at that thread there were two issues in the original patch.
1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post.
2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return.
This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card.
$ lspci -vvv -n -s 00:08.0
00:08.0 0780: 10b5:9050 (rev 01)
Subsystem: 10b5:1588
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 1: I/O ports at ff00 [size=128]
Region 2: I/O ports at fe00 [size=64]
Region 3: I/O ports at fd00 [size=8]
Capabilities: <access denied>
Kernel driver in use: serial
$ dmesg | grep 0000:00:08.0:
[ 0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780
[ 0.083355] pci 0000:00:08.0: reg 14: [io 0xff00-0xff7f]
[ 0.083369] pci 0000:00:08.0: reg 18: [io 0xfe00-0xfe3f]
[ 0.083382] pci 0000:00:08.0: reg 1c: [io 0xfd00-0xfd07]
[ 0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot
[ 1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A
[ 1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A
[ 1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A
[ 1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A
[ 1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A
[ 1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A
[ 1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A
[ 1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A
projects / karo-tx-linux.git / log