Bjorn Helgaas [Thu, 31 Oct 2013 19:50:08 +0000 (13:50 -0600)]
Merge branch 'pci/gregkh-driver-core' into next
* pci/gregkh-driver-core:
PCI: Make pci_bus_attrs, pci_dev_attrs, dev_rescan_attr, dev_remove_attr, vga_attr static
PCI: convert bus code to use dev_groups
PCI: convert bus code to use drv_groups
PCI: convert bus code to use bus_groups
Marek Vasut [Tue, 15 Oct 2013 16:06:38 +0000 (18:06 +0200)]
PCI: imx6: Probe the PCIe in fs_initcall()
Probe the PCIe driver in fs_initcall() instead of module_init()
to assure that pci_assign_unassigned_resources() will be called
early. This function is called in dw_pcie_host_init(), which is
in turn called from imx6_add_pcie_port(), which is called from
imx6_pcie_probe(). If this is not called early, we will hit
resource collisions since pcieport driver is then probed way too
late.
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Frank Li <lznuaa@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mohit KUMAR <Mohit.KUMAR@st.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Richard Zhu <r65037@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sean Cross <xobs@kosagi.com> Cc: Siva Reddy Kallam <siva.kallam@samsung.com> Cc: Srikanth T Shivanand <ts.srikanth@samsung.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Yinghai Lu <yinghai@kernel.org>
This adds internal PCI controller driver for R-Car Gen2 SoC. There are
three PCI controllers available with only a single EHCI/OHCI device
built-in on each PCI bus. This gives us three USB channels. Channel 0 is
shared with the USBHS device, while channel 2 is shared with the USBSS.
The PCI controllers do not support I/O port space mapping, and it is not
needed here.
Marek Vasut [Wed, 23 Oct 2013 05:12:18 +0000 (22:12 -0700)]
PCI: imx6: Increase link startup timeout
A longer link startup timeout is required when certain PCI switches are
attached to the root complex. This was tested with a Pericom switch
and a PLX switch.
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tim Harvey [Fri, 18 Oct 2013 00:27:22 +0000 (17:27 -0700)]
PCI: imx6: Fix imprecise abort handler
An imprecise abort is triggered when a port behind a switch is accessed
and no device is present. At enumeration, imprecise aborts are not enabled
thus this ends up getting deferred until the kernel has completed init. At
that point we must not adjust PC - the handler must do nothing, but a
handler must exist.
This fixes random crashes that occur right after freeing init.
Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de>
Pratyush Anand [Wed, 9 Oct 2013 12:32:12 +0000 (21:32 +0900)]
PCI: designware: Add irq_create_mapping()
Without irq_create_mapping(), the correct IRQ number cannot be
provided. In this case, it makes problems such as NULL dereference.
Thus, irq_create_mapping() should be added for MSI.
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pci/misc:
PCI: Remove unused PCI_MSIX_FLAGS_BIRMASK definition
PCI: acpiphp_ibm: Convert to dynamic debug
PCI: acpiphp: Convert to dynamic debug
PCI: Remove Intel Haswell D3 delays
PCI: Pass type, width, and prefetchability for window alignment
PCI: Document reason for using pci_is_root_bus()
PCI: Use pci_is_root_bus() to check for root bus
PCI: Remove unused "is_pcie" from pci_dev structure
PCI: Update pci_find_slot() description in pci.txt
[SCSI] qla2xxx: Use standard PCIe Capability Link register field names
PCI: Fix comment typo, remove unnecessary !! in pci_is_pcie()
PCI: Drop "setting latency timer" messages
* pci/host-exynos:
PCI: exynos: Turn off power of phy block when link failed
PCI: exynos: Add support for MSI
MAINTAINERS: Add Jingoo Han as Samsung Exynos PCIe driver maintainer
Lan Tianyu [Wed, 25 Sep 2013 00:07:28 +0000 (18:07 -0600)]
PCI: acpiphp_ibm: Convert to dynamic debug
This patch is to use pr_debug/info/warn/err to replace acpiphp_ibm debug
functions and remove module's debug param.
User interface change: before this patch, boot with the "acpiphp_ibm.debug"
kernel parameter to turn on debug. After this patch, set
CONFIG_DYNAMIC_DEBUG=y and boot with "acpiphp_ibm.dyndebug=+p" instead.
See Documentation/dynamic-debug-howto.txt.
[bhelgaas: changelog] Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Lan Tianyu [Wed, 25 Sep 2013 00:11:48 +0000 (18:11 -0600)]
PCI: acpiphp: Convert to dynamic debug
This patch is to use pr_debug/info/warn/err to replace acpiphp debug
functions and remove module's debug param.
User interface change: before this patch, boot with the "acpiphp.debug"
kernel parameter to turn on debug. After this patch, set
CONFIG_DYNAMIC_DEBUG=y and boot with "acpiphp.dyndebug=+p" instead.
See Documentation/dynamic-debug-howto.txt.
[bhelgaas: changelog] Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Jingoo Han [Fri, 6 Sep 2013 08:21:45 +0000 (17:21 +0900)]
PCI: exynos: Turn off power of phy block when link failed
When link failed, there is no need to turn on phy block. Also,
turning on phy block is added, in order to turn on phy block
regardless of the default value of phy registers.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The latest Intel Haswell chipsets have a hardware optimization which
allows on-chip PCI devices to ignore the 10ms delay before entering
or exiting D3 suspend.
This patch implements the optimization as a PCI quirk, since we want
tight control over which devices use it. This way we can test each device
individually to be sure there are no issues before we enable the quirk.
The first set of devices are from the Haswell platform, which includes
every PCI device that is on the northbridge and southbridge.
This patch reduces the Haswell suspend time from 93 ms to 47 ms and resume
time from 160 ms to 64 ms.
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Wei Yang [Fri, 6 Sep 2013 01:45:58 +0000 (09:45 +0800)]
PCI: Pass type, width, and prefetchability for window alignment
When calculating window_alignment(), type information like IORESOURCE_MEM
and IORESOURCE_PREFETCH may not be enough. For example, on powernv, we
need to know whether the window is 64-bit or not.
This patch passes the full resource type (res->flags) for window alignment.
Some code assumes "bus->self == NULL" means the bus is a root bus. This
adds a comment explaining why this is incorrect ("virtual" buses added for
SR-IOV have "bus->self == NULL" but are not root buses).
Wei Yang [Fri, 6 Sep 2013 01:45:56 +0000 (09:45 +0800)]
PCI: Use pci_is_root_bus() to check for root bus
In __pci_bus_size_bridges() we check whether a bus is a root bus by testing
bus->self. As indicated by commit 79af72d7 ("PCI: pci_is_root_bus
helper"), bus->self == NULL is not a proper way to check for a root bus.
One issue is that "virtual" buses added for SR-IOV (via virtfn_add_bus())
have bus->self == NULL but are not root buses.
This patch changes it to pci_is_root_bus() to check whether it is a root
bus.
[bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[SCSI] qla2xxx: Use standard PCIe Capability Link register field names
Use the standard #defines for PCIe Link Capability register fields
rather than bare numbers. This also uses the new PCI Express Capability
accessor rather than reading the capability directly.
Merge branch 'pci/yijing-pci_is_pcie-v2' into next
* pci/yijing-pci_is_pcie-v2:
powerpc/pci: Use pci_is_pcie() to simplify code
[SCSI] qla2xxx: Use pcie_is_pcie() to simplify code
[SCSI] csiostor: Use pcie_capability_clear_and_set_word() to simplify code
[SCSI] bfa: Use pcie_set()/get_readrq() to simplify code
x86/pci: Use cached pci_dev->pcie_cap to simplify code
PCI: Use pci_is_pcie() to simplify code
* pci/bjorn-osc:
PCI/ACPI: Decode _OSC bitmasks symbolically
PCI/ACPI: Separate out _OSC "we don't support enough services" path
PCI/ACPI: Separate out _OSC "PCIe port services disabled" path
PCI/ACPI: Skip _OSC control tests if _OSC support call failed
PCI/ACPI: Run _OSC only once for OSPM feature support
PCI/ACPI: Split _OSC "support" and "control" flags into separate variables
PCI/ACPI: Move _OSC stuff from acpi_pci_root_add() to negotiate_os_control()
PCI/ACPI: Drop unnecessary _OSC existence tests
PCI/ACPI: Name _OSC #defines more consistently
ACPI: Write OSC_PCI_CONTROL_MASKS like OSC_PCI_SUPPORT_MASKS
ACPI: Remove unused OSC_PCI_NATIVE_HOTPLUG
ACPI: Tidy acpi_run_osc() declarations
ACPI: Rename OSC_QUERY_TYPE to OSC_QUERY_DWORD
ACPI: Write _OSC bit field definitions in hex
This updates _OSC-related messages to be more human-readable. We now always
show the features we declare support for (this was previously invisible) as
well as the features we are granted control of.
Typical changes:
-acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
-acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
+acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
+acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI/ACPI: Separate out _OSC "we don't support enough services" path
Test the services we support (extended config space, ASPM, MSI) separately
so we can give a better message. Previously we said "Unable to request
_OSC control..."; now we'll say "we support %#02x but %#02x are required".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI/ACPI: Separate out _OSC "PCIe port services disabled" path
Test "pcie_ports_disabled" separately so we can give a better message.
Previously we said "Unable to request _OSC control..."; now we'll
say "PCIe port services disabled; not requesting _OSC control".
"pcie_ports_disabled" is true when CONFIG_PCIEPORTBUS=n or we boot
with "pcie_ports=compat".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI/ACPI: Skip _OSC control tests if _OSC support call failed
If the _OSC support notification fails, we will never request control
(because "support == OSC_PCI_SEGMENT_GROUPS_SUPPORT", which doesn't include
all the features in ACPI_PCIE_REQ_SUPPORT), so we can return early to
simplify the code.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI/ACPI: Run _OSC only once for OSPM feature support
Previously, we ran _OSC once to tell the platform that we support
PCI Segment Groups, then we ran it again if we supported any additional
features (ASPM, MSI, or extended config space). I don't think it's
necessary to run it twice, since we can easily build the complete
mask of features we support before running _OSC the first time.
We run _OSC again later when requesting control of PCIe features;
that's unaffected by this change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI/ACPI: Split _OSC "support" and "control" flags into separate variables
Previously we used "flags" for both:
- the bitmask of features we support (segments, ASPM, MSI, etc.), and
- the bitmask of features we want to control (native hotplug, AER, etc.)
To reduce confusion, this patch splits this into two variables:
"support" is the bitmask of features we support, and "control" is the
bitmask of features we want to control. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PCI/ACPI: Move _OSC stuff from acpi_pci_root_add() to negotiate_os_control()
This doesn't change any of the _OSC code; it just moves it out into
a new function so it doesn't clutter acpi_pci_root_add() so much. This
also enables future simplifications.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There's no need to check whether _OSC exists here; we eventually
call acpi_evaluate_object(..., "_OSC", ...), and that will fail
gracefully if _OSC doesn't exist.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OSC_QUERY_TYPE isn't a "type"; it's an index into the _OSC Capabilities
Buffer of DWORDs. Rename OSC_QUERY_TYPE, OSC_SUPPORT_TYPE, and
OSC_CONTROL_TYPE to OSC_QUERY_DWORD, etc., to make this clear.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update _OSC definition comments to correspond to the 1-based spec wording
(DWORD 1, etc.) Write _OSC field #defines as hex to make clear that they
are bits in a 32-bit DWORD, not arbitrary values. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Yijing Wang [Thu, 5 Sep 2013 07:55:26 +0000 (15:55 +0800)]
[SCSI] csiostor: Use pcie_capability_clear_and_set_word() to simplify code
pci_is_pcie() and pcie_capability_clear_and_set_word() make it trivial
to set the PCIe Completion Timeout, so just fold the
csio_set_pcie_completion_timeout() function into its caller.
[bhelgaas: changelog, fold csio_set_pcie_completion_timeout() into caller] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Naresh Kumar Inna <naresh@chelsio.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jesper Juhl <jj@chaosbits.net>
Yijing Wang [Thu, 5 Sep 2013 07:55:28 +0000 (15:55 +0800)]
x86/pci: Use cached pci_dev->pcie_cap to simplify code
The PCI core caches the PCIe Capability offset in pci_dev->pcie_cap, so
use that instead of pci_find_capability(). Use pci_bus_set_ops() when
replacing the device pci_ops. And use #defines instead of numeric
constants.
[bhelgaas: changelog, also use PCI_EXP_LNKCTL_ASPMC] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Merge tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are a number of small staging tree and iio driver fixes. Nothing
major, just lots of little things"
* tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits)
iio:buffer_cb: Add missing iio_buffer_init()
iio: Prevent race between IIO chardev opening and IIO device free
iio: fix: Keep a reference to the IIO device for open file descriptors
iio: Stop sampling when the device is removed
iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL
iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume
iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume
iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume
iio: iio_device_add_event_sysfs() bugfix
staging: iio: ade7854-spi: Fix return value
staging:iio:hmc5843: Fix measurement conversion
iio: isl29018: Fix uninitialized value
staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver.
iio: at91: fix adc_clk overflow
staging: line6: add bounds check in snd_toneport_source_put()
Staging: comedi: Fix dependencies for drivers misclassified as PCI
staging: r8188eu: Adjust RX gain
staging: r8188eu: Fix smatch warning in core/rtw_ieee80211.
staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c
staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c
...
Merge tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 3.12-rc2.
One is a revert of a EHCI change that isn't quite ready for 3.12.
Others are minor things, gadget fixes, Kconfig fixes, and some quirks
and documentation updates.
All have been in linux-next for a bit"
* tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: pl2303: distinguish between original and cloned HX chips
USB: Faraday fotg210: fix email addresses
USB: fix typo in usb serial simple driver Kconfig
Revert "USB: EHCI: support running URB giveback in tasklet context"
usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intr
usb: s3c-hsotg: fix unregistration function
usb: gadget: f_mass_storage: reset endpoint driver data when disabled
usb: host: fsl-mph-dr-of: Staticize local symbols
usb: gadget: f_eem: Staticize eem_alloc
usb: gadget: f_ecm: Staticize ecm_alloc
usb: phy: omap-usb3: Fix return value
usb: dwc3: gadget: avoid memory leak when failing to allocate all eps
usb: dwc3: remove extcon dependency
usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register()
usb: dwc3: pci: add support for BayTrail
usb: gadget: cdc2: fix conversion to new interface of f_ecm
usb: gadget: fix a bug and a WARN_ON in dummy-hcd
usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
- some small fixes for msm and exynos
- a regression revert affecting nouveau users with old userspace
- intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
Revert "drm: mark context support as a legacy subsystem"
drm/i915: Don't enable the cursor on a disable pipe
drm/i915: do not update cursor in crtc mode set
drm/exynos: fix return value check in lowlevel_buffer_allocate()
drm/exynos: Fix address space warnings in exynos_drm_fbdev.c
drm/exynos: Fix address space warning in exynos_drm_buf.c
drm/exynos: Remove redundant OF dependency
drm/msm: drop unnecessary set_need_resched()
drm/i915: kill set_need_resched
drm/msm: fix potential NULL pointer dereference
drm/i915/dvo: set crtc timings again for panel fixed modes
drm/i915/sdvo: Robustify the dtd<->drm_mode conversions
drm/msm: workaround for missing irq
drm/msm: return -EBUSY if bo still active
drm/msm: fix return value check in ERR_PTR()
drm/msm: fix cmdstream size check
drm/msm: hangcheck harder
drm/msm: handle read vs write fences
drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion
drm/i915: Use proper print format for debug prints
...
Merge branch 'for-3.12/core' of git://git.kernel.dk/linux-block
Pull block IO fixes from Jens Axboe:
"After merge window, no new stuff this time only a collection of neatly
confined and simple fixes"
* 'for-3.12/core' of git://git.kernel.dk/linux-block:
cfq: explicitly use 64bit divide operation for 64bit arguments
block: Add nr_bios to block_rq_remap tracepoint
If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up.
bio-integrity: Fix use of bs->bio_integrity_pool after free
blkcg: relocate root_blkg setting and clearing
block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
block: trace all devices plug operation
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"These are mostly bug fixes and a two small performance fixes. The
most important of the bunch are Josef's fix for a snapshotting
regression and Mark's update to fix compile problems on arm"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
Btrfs: create the uuid tree on remount rw
btrfs: change extent-same to copy entire argument struct
Btrfs: dir_inode_operations should use btrfs_update_time also
btrfs: Add btrfs: prefix to kernel log output
btrfs: refuse to remount read-write after abort
Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0
Btrfs: don't leak transaction in btrfs_sync_file()
Btrfs: add the missing mutex unlock in write_all_supers()
Btrfs: iput inode on allocation failure
Btrfs: remove space_info->reservation_progress
Btrfs: kill delay_iput arg to the wait_ordered functions
Btrfs: fix worst case calculator for space usage
Revert "Btrfs: rework the overcommit logic to be based on the total size"
Btrfs: improve replacing nocow extents
Btrfs: drop dir i_size when adding new names on replay
Btrfs: replay dir_index items before other items
Btrfs: check roots last log commit when checking if an inode has been logged
Btrfs: actually log directory we are fsync()'ing
Btrfs: actually limit the size of delalloc range
Btrfs: allocate the free space by the existed max extent size when ENOSPC
...
Merge tag 'iio-fixes-for-3.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First round of IIO fixes for 3.12
A series of wrong 'struct dev' assumptions in suspend/resume callbacks
following on from this issue being identified in a new driver review.
One to watch out for in future.
A number of driver specific fixes
1) at91 - fix a overflow in clock rate computation
2) dummy - Kconfig dependency issue
3) isl29018 - uninitialized value
4) hmc5843 - measurement conversion bug introduced by recent cleanup.
5) ade7854-spi - wrong return value.
Some IIO core fixes
1) Wrong value picked up for event code creation for a modified channel
2) A null dereference on failure to initialize a buffer after no buffer has
been in use, when using the available_scan_masks approach.
3) Sampling not stopped when a device is removed. Effects forced removal
such as hot unplugging.
4) Prevent device going away if a chrdev is still open in userspace.
5) Prevent race on chardev opening and device being freed.
6) Add a missing iio_buffer_init in the call back buffer.
These last few are the first part of a set from Lars-Peter Clausen who
has been taking a closer look at our removal paths and buffer handling
than anyone has for quite some time.
Adding the number of bios in a remapped request to 'block_rq_remap'
tracepoint.
Request remapper clones bios in a request to track the completion
status of each bio. So the number of bios can be useful information
for investigation.
Related discussions:
http://www.redhat.com/archives/dm-devel/2013-August/msg00084.html
http://www.redhat.com/archives/dm-devel/2013-September/msg00024.html
Josef Bacik [Sat, 21 Sep 2013 02:33:20 +0000 (22:33 -0400)]
Btrfs: create the uuid tree on remount rw
Users have been complaining of the uuid tree stuff warning that there is no uuid
root when trying to do snapshot operations. This is because if you mount -o ro
we will not create the uuid tree. But then if you mount -o rw,remount we will
still not create it and then any subsequent snapshot/subvol operations you try
to do will fail gloriously. Fix this by creating the uuid_root on remount rw if
it was not already there. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Mark Fasheh [Tue, 17 Sep 2013 22:43:54 +0000 (15:43 -0700)]
btrfs: change extent-same to copy entire argument struct
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data
back to it's argument struct. Unfortunately, not all architectures provide
__put_user_unaligned(), so compiles break on them if btrfs is selected.
Instead, just copy the whole struct in / out at the start and end of
operations, respectively.
Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Guangyu Sun [Mon, 16 Sep 2013 17:42:03 +0000 (10:42 -0700)]
Btrfs: dir_inode_operations should use btrfs_update_time also
Commit 2bc5565286121d2a77ccd728eb3484dff2035b58 (Btrfs: don't update atime on
RO subvolumes) ensures that the access time of an inode is not updated when
the inode lives in a read-only subvolume.
However, if a directory on a read-only subvolume is accessed, the atime is
updated. This results in a write operation to a read-only subvolume. I
believe that access times should never be updated on read-only subvolumes.
Reported-by: Koen De Wit <koen.de.wit@oracle.com> Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Frank Holton [Fri, 13 Sep 2013 15:46:50 +0000 (11:46 -0400)]
btrfs: Add btrfs: prefix to kernel log output
The kernel log entries for device label %s and device fsid %pU
are missing the btrfs: prefix. Add those here.
Signed-off-by: Frank Holton <fholton@gmail.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
David Sterba [Fri, 13 Sep 2013 15:41:20 +0000 (17:41 +0200)]
btrfs: refuse to remount read-write after abort
It's still possible to flip the filesystem into RW mode after it's
remounted RO due to an abort. There are lots of places that check for
the superblock error bit and will not write data, but we should not let
the filesystem appear read-write.
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0
This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default
subvolume by passing a subvolume id of 0.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: don't leak transaction in btrfs_sync_file()
In btrfs_sync_file(), if the call to btrfs_log_dentry_safe() returns
a negative error (for e.g. -ENOMEM via btrfs_log_inode()), we would
return without ending/freeing the transaction.
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Stefan Behrens [Wed, 11 Sep 2013 07:59:22 +0000 (09:59 +0200)]
Btrfs: add the missing mutex unlock in write_all_supers()
The BUG() was replaced by btrfs_error() and return -EIO with the
patch "get rid of one BUG() in write_all_supers()", but the missing
mutex_unlock() was overlooked.
The 0-DAY kernel build service from Intel reported the missing
unlock which was found by the coccinelle tool:
fs/btrfs/disk-io.c:3422:2-8: preceding lock on line 3374
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Tue, 17 Sep 2013 14:55:51 +0000 (10:55 -0400)]
Btrfs: kill delay_iput arg to the wait_ordered functions
This is a left over of how we used to wait for ordered extents, which was to
grab the inode and then run filemap flush on it. However if we have an ordered
extent then we already are holding a ref on the inode, and we just use
btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on
the inode to start work on the ordered extent. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Tue, 17 Sep 2013 14:50:06 +0000 (10:50 -0400)]
Btrfs: fix worst case calculator for space usage
Forever ago I made the worst case calculator say that we could potentially split
into 3 blocks for every level on the way down, which isn't right. If we split
we're only going to get two new blocks, the one we originally cow'ed and the new
one we're going to split. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Tue, 17 Sep 2013 14:48:00 +0000 (10:48 -0400)]
Revert "Btrfs: rework the overcommit logic to be based on the total size"
This reverts commit 70afa3998c9baed4186df38988246de1abdab56d. It is causing
performance issues and wasn't actually correct. There were problems with the
way we flushed delalloc and that was the real cause of the early enospc.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Thu, 12 Sep 2013 20:58:28 +0000 (16:58 -0400)]
Btrfs: improve replacing nocow extents
Various people have hit a deadlock when running btrfs/011. This is because when
replacing nocow extents we will take the i_mutex to make sure nobody messes with
the file while we are replacing the extent. The problem is we are already
holding a transaction open, which is a locking inversion, so instead we need to
save these inodes we find and then process them outside of the transaction.
Further we can't just lock the inode and assume we are good to go. We need to
lock the extent range and then read back the extent cache for the inode to make
sure the extent really still points at the physical block we want. If it
doesn't we don't have to copy it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Wed, 11 Sep 2013 18:17:00 +0000 (14:17 -0400)]
Btrfs: drop dir i_size when adding new names on replay
So if we have dir_index items in the log that means we also have the inode item
as well, which means that the inode's i_size is correct. However when we
process dir_index'es we call btrfs_add_link() which will increase the
directory's i_size for the new entry. To fix this we need to just set the dir
items i_size to 0, and then as we find dir_index items we adjust the i_size.
btrfs_add_link() will do it for new entries, and if the entry already exists we
can just add the name_len to the i_size ourselves. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Wed, 11 Sep 2013 15:57:23 +0000 (11:57 -0400)]
Btrfs: replay dir_index items before other items
A user reported a bug where his log would not replay because he was getting
-EEXIST back. This was because he had a file moved into a directory that was
logged. What happens is the file had a lower inode number, and so it is
processed first when replaying the log, and so we add the inode ref in for the
directory it was moved to. But then we process the directories DIR_INDEX item
and try to add the inode ref for that inode and it fails because we already
added it when we replayed the inode. To solve this problem we need to just
process any DIR_INDEX items we have in the log first so this all is taken care
of, and then we can replay the rest of the items. With this patch my reproducer
can remount the file system properly instead of erroring out. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Wed, 11 Sep 2013 13:55:42 +0000 (09:55 -0400)]
Btrfs: check roots last log commit when checking if an inode has been logged
Liu introduced a local copy of the last log commit for an inode to make sure we
actually log an inode even if a log commit has already taken place. In order to
make sure we didn't relog the same inode multiple times he set this local copy
to the current trans when we log the inode, because usually we log the inode and
then sync the log. The exception to this is during rename, we will relog an
inode if the name changed and it is already in the log. The problem with this
is then we go to sync the inode, and our check to see if the inode has already
been logged is tripped and we don't sync the log. To fix this we need to _also_
check against the roots last log commit, because it could be less than what is
in our local copy of the log commit. This fixes a bug where we rename a file
into a directory and then fsync the directory and then on remount the directory
is no longer there. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Wed, 11 Sep 2013 13:36:30 +0000 (09:36 -0400)]
Btrfs: actually log directory we are fsync()'ing
If you just create a directory and then fsync that directory and then pull the
power plug you will come back up and the directory will not be there. That is
because we won't actually create directories if we've logged files inside of
them since they will be created on replay, but in this check we will set our
logged_trans of our current directory if it happens to be a directory, making us
think it doesn't need to be logged. Fix the logic to only do this to parent
directories. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 30 Aug 2013 18:38:49 +0000 (14:38 -0400)]
Btrfs: actually limit the size of delalloc range
So forever we have had this thing to limit the amount of delalloc pages we'll
setup to be written out to 128mb. This is because we have to lock all the pages
in this range, so anything above this gets a bit unweildly, and also without a
limit we'll happily allocate gigantic chunks of disk space. Turns out our check
for this wasn't quite right, we wouldn't actually limit the chunk we wanted to
write out, we'd just stop looking for more space after we went over the limit.
So if you do a giant 20gb dd on my box with lots of ram I could get 2gig
extents. This is fine normally, except when you go to relocate these extents
and we can't find enough space to relocate these moster extents, since we have
to be able to allocate exactly the same sized extent to move it around. So fix
this by actually enforcing the limit. With this patch I'm no longer seeing
giant 1.5gb extents. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: allocate the free space by the existed max extent size when ENOSPC
By the current code, if the requested size is very large, and all the extents
in the free space cache are small, we will waste lots of the cpu time to cut
the requested size in half and search the cache again and again until it gets
down to the size the allocator can return. In fact, we can know the max extent
size in the cache after the first search, so we needn't cut the size in half
repeatedly, and just use the max extent size directly. This way can save
lots of cpu time and make the performance grow up when there are only fragments
in the free space cache.
According to my test, if there are only 4KB free space extents in the fs,
and the total size of those extents are 256MB, we can reduce the execute
time of the following test from 5.4s to 1.4s.
dd if=/dev/zero of=<testfile> bs=1MB count=1 oflag=sync
Changelog v2 -> v3:
- fix the problem that we skip the block group with the space which is
less than we need.
Changelog v1 -> v2:
- address the problem that we return a wrong start position when searching
the free space in a bitmap.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Stefan Behrens [Tue, 3 Sep 2013 13:25:27 +0000 (15:25 +0200)]
btrfs: show compiled-in config features at module load time
We want to know if there are debugging features compiled in, this may
affect performance. The message is printed before the sanity checks.
(This commit message is a copy of David Sterba's commit message when
he introduced btrfs_print_info()).
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: more efficient inode tree replace operation
Instead of removing the current inode from the red black tree
and then add the new one, just use the red black tree replace
operation, which is more efficient.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs: do not add replace target to the alloc_list
If replace was suspended by the umount, replace target device is added
to the fs_devices->alloc_list during a later mount. This is obviously
wrong. ->is_tgtdev_for_dev_replace is supposed to guard against that,
but ->is_tgtdev_for_dev_replace is (and can only ever be) initialized
*after* everything is opened and fs_devices lists are populated. Fix
this by checking the devid instead: for replace targets it's always
equal to BTRFS_DEV_REPLACE_DEVID.
Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 30 Aug 2013 19:09:51 +0000 (15:09 -0400)]
Btrfs: fixup error handling in btrfs_reloc_cow
If we failed to actually allocate the correct size of the extent to relocate we
will end up in an infinite loop because we won't return an error, we'll just
move on to the next extent. So fix this up by returning an error, and then fix
all the callers to return an error up the stack rather than BUG_ON()'ing.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
projects / linux-beck.git / log