Dave Airlie [Thu, 19 Sep 2013 01:47:23 +0000 (11:47 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
A couple of bios parser fixes (one for ancient chips, another for new ones - important in Optimus configs). Another to make sure KMS is enabled on certain Optimus configs, and a TTM failure path fix.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path
drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM
drm/nouveau/kms: enable for non-vga pci classes
drm/nouveau/bios/init: stub opcode 0xaa
Dave Airlie [Mon, 16 Sep 2013 01:36:19 +0000 (11:36 +1000)]
Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A few more radeon fixes. A fix for UVD on AGP cards, a fix for non-full
screen scaling on laptop panels with DP bridge chips, and a bunch of dpm
fixes.
* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: avoid UVD corruptions on AGP cards
drm/radeon: fix panel scaling with eDP and LVDS bridges
drm/radeon/dpm: rework auto performance level enable
drm/radeon: Fix hmdi typo
drm/radeon/dpm/rs780: fix force_performance state for same sclks
drm/radeon/dpm/rs780: don't enable sclk scaling if not required
drm/radeon/dpm/rs780: add some sanity checking to sclk scaling
drm/radeon/dpm/rs780: use drm_mode_vrefresh()
Alex Deucher [Fri, 13 Sep 2013 18:07:03 +0000 (14:07 -0400)]
drm/radeon/dpm: rework auto performance level enable
Calling force_performance_level() from set_power_state()
doesn't work on some asics because the current power
state pointer has not been properly updated at that point.
Move the calls to force_performance_level() out of the
asic specific set_power_state() functions and into
the main power state sequence.
Fixes dpm resume on SI.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 13 Sep 2013 15:04:28 +0000 (11:04 -0400)]
drm/radeon/dpm/rs780: fix force_performance state for same sclks
If the low and high sclks within a power state are the same,
there no need to enable sclk scaling. Enabling sclk scaling
can cause display stability issues on some boards.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
Daniel Vetter [Thu, 12 Sep 2013 15:57:29 +0000 (17:57 +0200)]
drm/udl: rip out set_need_resched
This very much looks like copypasta from drm/i915's fault handler.
It was used there to duct-tape over issues around gpu reset handling.
Since that can't ever happen for udl and there's seemingly no other
reason for this just drop it.
Reported-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 9 Sep 2013 23:11:52 +0000 (19:11 -0400)]
drm/radeon/dpm: add infrastructure to properly handle bapm
bapm is a pm feature for sharing the power budget between
the GPU and the CPU on APUs. It needs to be enabled or
disabled in certain circumstances. For now, disable it
when on battery and enable it when on AC power.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 9 Sep 2013 23:27:01 +0000 (19:27 -0400)]
drm/radeon/dpm: handle bapm on kb/kv
bapm is a power management feature for handling the
power budget between the CPU and GPU on APUs. This
patch adds support for enabling or disabling it.
For now disable it by default. Enabling it properly
requires quite a bit more work and will be addressed
in a separate patch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 9 Sep 2013 22:56:50 +0000 (18:56 -0400)]
drm/radeon/dpm: handle bapm on trinity
bapm is a power management feature for handling the
power budget between the CPU and GPU on APUs. This
patch adds support for enabling or disabling it.
For now disable it by default. Enabling it properly
requires quite a bit more work and will be addressed
in a separate patch.
This patch fixes hangs on boot on certain trinity
laptops when the system is on battery power.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Jean Delvare [Tue, 10 Sep 2013 08:32:41 +0000 (10:32 +0200)]
drm/radeon: expose DPM thermal thresholds through sysfs
The hwmon sysfs interface allows exposing temperature limits. The "max"
and "min" thresholds will be exposed as a critical high limit and its
hysteresis value, respectively. This gives the user a better idea of how
well cooling is doing and whether it is sufficient.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jean Delvare [Tue, 10 Sep 2013 08:30:44 +0000 (10:30 +0200)]
drm/radeon: simplify driver data retrieval
You can get the driver data from struct device directly, there's no
need to get the PCI device first.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 9 Sep 2013 14:54:22 +0000 (10:54 -0400)]
drm/radeon/atom: workaround vbios bug in transmitter table on rs880 (v2)
The OUTPUT_ENABLE action jumps past the point in the coder where
the data_offset is set on certain rs780 cards. This worked
previously because the OUTPUT_ENABLE action is always called
immediately after the ENABLE action so the data_offset remained
set. In 6f8bbaf568c7f2c497558bfd04654c0b9841ad57
(drm/radeon/atom: initialize more atom interpretor elements to 0),
we explictly reset data_offset to 0 between atom calls which then
caused this to fail. The fix is to just skip calling the
OUTPUT_ENABLE action on the problematic chipsets. The ENABLE
action does the same thing and more. Ultimately, we could
probably drop the OUTPUT_ENABLE action all together on DCE3
asics.
Alex Deucher [Tue, 10 Sep 2013 13:40:37 +0000 (09:40 -0400)]
drm/radeon/dpm: fix fallback for empty UVD clocks
Some older 6xx-7xx boards didn't always fill in the
UVD clocks properly in the UVD power states. This
leads to the driver trying to set a 0 clock which
results in slow or broken UVD playback.
Alex Deucher [Thu, 5 Sep 2013 13:52:37 +0000 (09:52 -0400)]
drm/radeon/r6xx: add a stubbed out set_uvd_clocks callback
Certain r6xx boards use the same power state for both UVD
and other things. Since we don't support UVD on r6xx boards
at the moment, there was no callback installed for setting
the UVD clocks, however, on systems that use the same power
state, this leads to a NULL pointer dereference. Fill
in a stubbed out implementation for now to avoid the crash.
Alex Deucher [Tue, 3 Sep 2013 23:00:09 +0000 (19:00 -0400)]
drm/radeon: add spinlocks for indirect register accesss
This adds spinlocks to protect access to other
indirect register apertures. These indirect spaces are
used pretty infrequently and we haven't had an reported
problems, but better safe than sorry.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 3 Sep 2013 22:19:42 +0000 (18:19 -0400)]
drm/radeon: protect concurrent smc register access with a spinlock
smc registers are access indirectly via the main mmio aperture, so
there may be problems with concurrent access. This adds a spinlock
to protect access to this register space.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 4 Sep 2013 09:31:36 +0000 (12:31 +0300)]
drm/radeon: signedness bug in kv_dpm.c
The problem here is that "unsigned i" is always greater than or equal to
zero. These loops mostly have a second check for "(i == 0)" so only the
last two are actually buggy. The rest is just cleanup.
Bug 1: kv_force_dpm_highest() doesn't have an "(i == 0)" check so it's
a potential forever loop.
Bug 2: In kv_get_sleep_divider_id_from_clock() there is a typo and the
test is reversed "<=" vs ">" so we never enter the loop. That means
normally we return KV_MAX_DEEPSLEEP_DIVIDER_ID (5). The return value
from here is saved in ->DeepSleepDivId and I wasn't able to determine
how that is used. This is a static checker fix and I have not tested
it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 3 Sep 2013 18:58:44 +0000 (14:58 -0400)]
drm/radeon: add a connector property for audio
This provides a connector property to enable/disable hdmi
audio on the fly. The default is disabled, but you can select
auto (let the driver detect an audio capable monitor and enable it)
or enabled (force audio enabled). This also enables audio by
default so you no longer need a module parameter to enable audio.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 3 Sep 2013 17:31:33 +0000 (13:31 -0400)]
drm/radeon/si: properly handle internal cp ints
The internal cp interrupts need to be enabled and
disabled at specific times in order clockgating to
work properly. This patch changes the handling
of the CP_INT_CNTL register to respect the current
state of the internal CP interrupts when making
changes to the other interrupts in CP_INT_CNTL.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 3 Sep 2013 14:17:13 +0000 (10:17 -0400)]
drm/radeon/cik: properly handle internal cp ints
The internal cp interrupts need to be enabled and
disabled at specific times in order clockgating to
work properly. This patch changes the handling
of the CP_INT_CNTL register to respect the current
state of the internal CP interrupts when making
changes to the other interrupts in CP_INT_CNTL.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Tue, 10 Sep 2013 02:36:55 +0000 (12:36 +1000)]
Merge tag 'drm-intel-fixes-2013-09-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
- Early stolen mem reservation from Jesse in x86 boot code. Acked by Ingo
and hpa. This was ready much earlier but somehow I've thought it'd go
in through x86 trees, hence why this is late. Avoids the pci resource
code to plant mmiobars in the middle of stolen mem and other ugliness.
- vgaarb improvements from Alex Williamson plus the fix from Ville for the
vgacon->fbcon smooth transition "feature".
- Render pageflips on ivb/hsw to avoid stalls due to the ring switching
when only flipping on the blitter (Chris).
- Deadlock fixes around our flush_workqueue which crept back in - lockdep
isn't clever enough :(
- Shrinker recursion fix from Chris - this is the thing that blew the vma
patches from Ben I've taken out of 3.12.
- Fixup for the relocation refactoring. Also an igt testcase to make sure
we don't break this again.
- Pile of smaller fixups all over, shortlog has full details.
* tag 'drm-intel-fixes-2013-09-06' of git://people.freedesktop.org/~danvet/drm-intel: (29 commits)
drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done
drm/i915: try not to lose backlight CBLV precision
drm/i915: Confine page flips to BCS on Valleyview
drm/i915: Skip stolen region initialisation if none is reserved
drm/i915: fix gpu hang vs. flip stall deadlocks
drm/i915: Hold an object reference whilst we shrink it
drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
drm/i915: handle sdvo input pixel multiplier correctly again
drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
drm/i915: fix up the relocate_entry refactoring
drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
i915: Update VGA arbiter support for newer devices
vgaarb: Fix VGA decodes changes
vgaarb: Don't disable resources that are not owned
drm/i915: Pin pages whilst mapping the dma-buf
drm/i915: enable trickle feed on Haswell
x86: add early quirk for reserving Intel graphics stolen memory v5
drm/i915: split PCI IDs out into i915_drm.h v4
i915_gem: Convert kmem_cache_alloc(...GFP_ZERO) to kmem_cache_zalloc
...
Ville Syrjälä [Thu, 5 Sep 2013 17:40:52 +0000 (20:40 +0300)]
drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done
When transitioning away from vgacon the system tries to save the
current contents of the VGA memory, so that it can be cleanly handed
off to fbcon (or whatever comes afterwards).
i915: Update VGA arbiter support for newer devices
caused i915 to disable VGA memory decode for the IGD when i915 is
initializing. Unfortunately that happens before the vgacon->fbcon
handoff so vgacon_save_screen() will read out all ones from the
VGA memory.
After the handoff fbcon will inherit the bogus state from vgacon,
and pre-fills the fb with matching contents. The end result is
a white rectangle in the top left corner of the screen, the size
of which matches the now inactive VGA console.
To remedy the situation delay the disabling of VGA memory until
the vgacon->fbcon handoff has happened.
Also rename i915_enable_vga to i915_enable_vga_mem to make
the relationship between these functions clearer.
Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 23 Aug 2013 07:50:39 +0000 (10:50 +0300)]
drm/i915: try not to lose backlight CBLV precision
ACPI has _BCM and _BQC methods to set and query the backlight
brightness, respectively. The ACPI opregion has variables BCLP and CBLV
to hold the requested and current backlight brightness, respectively.
The BCLP variable has range 0..255 while the others have range
0..100. This means the _BCM method has to scale the brightness for BCLP,
and the gfx driver has to scale the requested value back for CBLV. If
the _BQC method uses the CBLV variable (apparently some implementations
do, some don't) for current backlight level reporting, there's room for
rounding errors.
Use DIV_ROUND_UP for scaling back to CBLV to get back to the same values
that were passed to _BCM, presuming the _BCM simply uses bclp = (in *
255) / 100 for scaling to BCLP.
Reference: https://gist.github.com/aaronlu/6314920 Reported-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 4 Sep 2013 09:54:30 +0000 (10:54 +0100)]
drm/i915: Confine page flips to BCS on Valleyview
Once again we find that Valleyview is ever so subtlety different from
the rest of its gen7 brethen. In this case, Valleyview has no support
for pageflipping from the RCS ring.
Reported-by: "Lee, Chon Ming" <chon.ming.lee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68968 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 5 Sep 2013 12:40:25 +0000 (13:40 +0100)]
drm/i915: Skip stolen region initialisation if none is reserved
Paulo reported that if he set the amount of reserved memory to 0, then
we emitted a warning about a conflict before disabling our use of stolen
memory. This was introduced with
drm/i915: Verify that our stolen memory doesn't conflict
and is simply fixed by checking for a no reservation first.
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: Finish page flips and update primary planes after a GPU reset
the gpu reset work now also grabs modeset locks. But since work items
on our private work queue are not allowed to do that due to the
flush_workqueue from the pageflip code this results in a neat
deadlock:
This blew up while running kms_flip/flip-vs-panning-vs-hang-interruptible
on one of my older machines.
Unfortunately (despite the proper lockdep annotations for
flush_workqueue) lockdep still doesn't detect this correctly, so we
need to rely on chance to discover these bugs.
Apply the usual bugfix and schedule the reset work on the system
workqueue to keep our own driver workqueue free of any modeset lock
grabbing.
Note that this is not a terribly serious regression since before the
offending commit we'd simply have stalled userspace forever due to
failing to abort all outstanding pageflips.
v2: Add a comment as requested by Chris.
Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 4 Sep 2013 09:45:50 +0000 (10:45 +0100)]
drm/i915: Hold an object reference whilst we shrink it
Whilst running the shrinker, we need to hold a reference as we unbind
the objects, or else we may end up waiting for and retiring requests,
which in turn may result in this object being freed.
This is very similar to the eviction code which also has to be very
careful to keep a reference to its objects as it retires and unbinds
them.
Another similarity, that Ben pointed out, is that as we may call
retire-requests, the unbound_list is outside of our control. We must
only process a single element of that list at a time, that is we can not
rely on the "safe" next pointer being valid after a call to
i915_vma_unbind().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68171 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org
[danvet: Bikeshed the comments a bit as discussed with Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Thu, 5 Sep 2013 07:48:04 +0000 (17:48 +1000)]
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Summary:
- Consider fallback option to gem allocation fail
. try to allocate physically non-contiguous memory
if iommu is supported when physically contiguous memory allocation
failed.
- Add runtime pm support to g2d driver
- Add device tree support
. add device tree support to rotator driver, make fimd driver get
signal polarities from device tree.
- some fixups
. correct pixel format setting to fimd driver, and consider pixel
format checking to a particular window layer.
- some cleanups
. replace fb_videomode with videomode.
. remove non-DT support
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (21 commits)
drm/exynos: Fix build error with exynos_drm_connector.c
drm/exynos: Remove non-DT support in exynos_drm_fimd
drm/exynos: Remove non-DT support in exynos_hdmi
drm/exynos: Remove non-DT support in exynos_drm_g2d
drm/exynos: Remove non-DT support in exynos_hdmiphy
drm/exynos: Remove non-DT support in exynos_ddc
drm/exynos: Make Exynos DRM drivers depend on OF
drm/exynos: Consider fallback option to allocation fail
drm/exynos: fimd: move platform data parsing to separate function
drm/exynos: fimd: get signal polarities from device tree
drm/exynos: fimd: replace struct fb_videomode with videomode
drm/exynos: check a pixel format to a particular window layer
drm/exynos: fix fimd pixel format setting
drm/exynos: Add NULL pointer check
drm/exynos: Remove redundant error messages
drm/exynos: Add missing of.h header include
drm/exynos: Remove redundant NULL check in exynos_drm_buf
drm/exynos: add device tree support for rotator
drm/exynos: Add missing includes
drm/exynos: add runtime pm interfaces to g2d driver
...
Sachin Kamat [Fri, 30 Aug 2013 09:10:51 +0000 (14:40 +0530)]
drm/exynos: Fix build error with exynos_drm_connector.c
exynos_drm_connector.c now uses videomode helper API. Hence select
VIDEOMODE_HELPERS at DRM_EXYNOS level itself instead of at
DRM_EXYNOS_FIMD to avoid the following compilation error when FIMD
is not selected (introduced by commit cf796235a6 "drm/exynos: fimd:
replace struct fb_videomode with videomode"):
drivers/built-in.o: In function `exynos_drm_connector_get_modes':
drivers/gpu/drm/exynos/exynos_drm_connector.c:86:
undefined reference to `drm_display_mode_from_videomode'
Sachin Kamat [Wed, 28 Aug 2013 05:17:58 +0000 (10:47 +0530)]
drm/exynos: Remove non-DT support in exynos_drm_fimd
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Sachin Kamat [Wed, 28 Aug 2013 05:17:57 +0000 (10:47 +0530)]
drm/exynos: Remove non-DT support in exynos_hdmi
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Sachin Kamat [Wed, 28 Aug 2013 05:17:56 +0000 (10:47 +0530)]
drm/exynos: Remove non-DT support in exynos_drm_g2d
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Sachin Kamat [Wed, 28 Aug 2013 05:17:55 +0000 (10:47 +0530)]
drm/exynos: Remove non-DT support in exynos_hdmiphy
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Sachin Kamat [Wed, 28 Aug 2013 05:17:54 +0000 (10:47 +0530)]
drm/exynos: Remove non-DT support in exynos_ddc
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.
Vikas Sajjan [Fri, 23 Aug 2013 06:35:06 +0000 (12:05 +0530)]
drm/exynos: Consider fallback option to allocation fail
To address the case where physically contiguous memory
MAY NOT be a mandatory requirement for framebuffer for
the application calling exynos_drm_gem_dumb_create,
the patch adds a feature to get non physically contiguous
memory for framebuffer, if physically contiguous memory
allocation fails and if IOMMU is supported.
Andrzej Hajda [Wed, 21 Aug 2013 14:22:01 +0000 (16:22 +0200)]
drm/exynos: fimd: replace struct fb_videomode with videomode
The patch replaces all occurrences of struct fb_videomode by
more accurate struct videomode. The change allows to remove
mode conversion function and simplifies clock divider calculation.
Clock configuration is moved to separate function.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Tue, 20 Aug 2013 04:51:02 +0000 (13:51 +0900)]
drm/exynos: fix fimd pixel format setting
This patch fixes wrong pixel format setting.
A pixel format is decided according to bpp and depth, or user-requested
format but fimd driver considered only bpp value to decide a proper pixel
format. So this patch makes a proper pixel format to be set according
to drm_framebuffer's pixel_format which is set by addfb with bpp and
depth, or addfb2 with user-requested format.
Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Chanho Park [Tue, 13 Aug 2013 05:12:56 +0000 (14:12 +0900)]
drm/exynos: add device tree support for rotator
The exynos4 platform is only dt-based since 3.10, we should convert driver data
and ids to dt-based parsing methods. The rotator driver has a limit table to get
size limit of input picture. Each SoCs has slightly different limit value
compared with any others.
For example, exynos4210's max_size of RGB888 is 16k x 16k. But, others have
8k x 8k. Another example the exynos5250 should have multiple of 2 pixel size
for its X/Y axis. Thus, we should keep different tables for each of them.
This patch also includes desciptions of each nodes for the rotator and specifies
a example how to bind it.
Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Mark Brown [Mon, 12 Aug 2013 23:46:40 +0000 (00:46 +0100)]
drm/exynos: Add missing includes
Ensure that all externally accessed functions are correctly prototyped
when defined in each file by making sure the headers with the protoypes
are included in the file with the definition.
Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Vikas Sajjan [Tue, 6 Aug 2013 11:52:04 +0000 (17:22 +0530)]
drm/exynos: Add fallback option to get non physically contiguous memory for fb
While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
connected with resolution 2560x1600, following error occured even with
IOMMU enabled:
[0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
[0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0
To address the cases where physically contiguous memory MAY NOT be a
mandatory requirement for fb, the patch adds a feature to get non physically
contiguous memory for fb if physically contiguous memory allocation fails
and if IOMMU is supported.
Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Arun Kumar <arun.kk@samsung.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
Daniel Vetter [Tue, 3 Sep 2013 18:40:37 +0000 (20:40 +0200)]
drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
The dpll actually runs at the port clock so we don't need
to multiply it again with the pixel multiplier to get the
adjusted_mode.clock. This is in contrast to the ironlake
pixel clock readout code which uses the fdi dotclock: That
one does _not_ run with multiplied pixels.
This issue goes back to the original clock readout code added
in
Daniel Vetter [Tue, 3 Sep 2013 18:40:36 +0000 (20:40 +0200)]
drm/i915: handle sdvo input pixel multiplier correctly again
The sdvo input timing needs to be the actual mode, the sdvo
encoder automatically adjusts for the need of pixel doubling or
quadrupling. This was lost in pipe config conversion of the
pixel multiplier in
Daniel Vetter [Mon, 2 Sep 2013 14:22:25 +0000 (16:22 +0200)]
drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
Historically we've run our own driver hotplug handling in our own
work-queue, which then launched the drm core hotplug handling in the
system workqueue. This is important since we flush our own driver
workqueue in the pageflip code while hodling modeset locks, and only
the drm hotplug code grabbed these locks. But with
this was changed and now we could deadlock in our flip handler if
there's a hotplug work blocking the progress of the crucial unpin
works. So this broke the careful deadlock avoidance implemented in
drm/i915: Flush outstanding unpin tasks before pageflipping
Since the rule thus far has been that work items on our own workqueue
may never grab modeset locks simply restore that rule again.
v2: Add a comment to the declaration of dev_priv->wq to warn readers
about the tricky implications of using it. Suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Stuart Abercrombie <sabercrombie@chromium.org> Reported-by: Stuart Abercrombie <sabercrombie@chromium.org>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/26239 Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in a comment at the place where we schedule the work.
Requested after-the-fact by Chris on irc since the hpd work isn't the
only place we botch this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Wed, 4 Sep 2013 04:28:53 +0000 (14:28 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Nothing major ready for merging yet, so mostly bug fixes below, in addition to VP3 enablement from Ilia.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: fix command submission to use vmalloc for big allocations
drm/nouveau/bios/therm: handle vbioses with duplicate entries (mostly nva5)
drm/nouveau: use MSI interrupts
drm/nv50-/kms: assume analog display connected if load on any pin
drm/nv50/disp: prevent false output detection on the original nv50
drm/nouveau/i2c: pass the function pointers in at creation time
drm/nouveau/therm: survive to suspend/resume cycles
drm/nouveau/timer: add a way to cancel alarms
drm/nouveau/timer: restore the time on resume
drm/nouveau/fan: restore pwm value on resume when in manual/auto mode
drm/nouveau/therm: Set the correct pwm_mode upon resume
drm/nouveau: require contiguous bo for framebuffer
drm/nv50-/disp: use the number of dac, sor, pior rather than hardcoded values
drm/nouveau: remove duplicate copy of nv44_graph_class
drm/nouveau/vdec: implement support for VP3 engines
drm/nouveau/core: get rid of math.h, replace log2i with order_base_2
Martin Peres [Fri, 30 Aug 2013 23:58:50 +0000 (01:58 +0200)]
drm/nouveau/bios/therm: handle vbioses with duplicate entries (mostly nva5)
Some vbioses have extra useless entries after "the end" of the table. This is
problematic since all of the vbios I found with this issue redefine the
pwm freq divider to insane levels (52750 Hz instead of 2500), thus breaking
fan management.
The first solution to solve this mess would be to change the length of the
table. The solution I choose was simply to avoid setting the pwm freq twice
as the other redefinitions are harmless with our current parser.
Signed-off-by: Martin Peres <martin.peres@labri.fr> Reported-by: Mariusz Bialonczyk <manio@skyboo.net> Tested-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lucas Stach [Wed, 28 Aug 2013 00:00:50 +0000 (02:00 +0200)]
drm/nouveau: use MSI interrupts
MSIs were only problematic on some old, broken chipsets. But now that we
already see systems where PCI legacy interrupts are somewhat flaky, it's
really time to move to MSIs.
v2 (Ben Skeggs): blacklist BR02 boards
Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Fri, 23 Aug 2013 17:43:42 +0000 (18:43 +0100)]
drm/nv50/disp: prevent false output detection on the original nv50
Commit ea9197cc323839ef3d5280c0453b2c622caa6bc7 effectively enabled the
use of an improved DAC detection code, but introduced a regression on
the original nv50 chipset, causing a ghost monitor to be detected.
v2 (Ben Skeggs): the offending line was likely a thinko, removed it for
all chipsets (tested nv50 and nve6 to cover entire range) and added
some additional debugging.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67382 Tested-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Fri, 23 Aug 2013 17:03:14 +0000 (13:03 -0400)]
drm/nouveau/i2c: pass the function pointers in at creation time
i2c_bit_add_bus can call the pre_xfer function, which expects the func
pointer to be set. Pass in func to the port creation logic so that it is
set before i2c_bit_add_bus.
See https://bugs.freedesktop.org/show_bug.cgi?id=68456
Reported-by: Hans-Peter Deifel <hpdeifel@gmx.de> Tested-by: Hans-Peter Deifel <hpdeifel@gmx.de> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 12 Aug 2013 02:48:52 +0000 (22:48 -0400)]
drm/nouveau/therm: survive to suspend/resume cycles
Therm uses 3 ptimer alarms. Two to drive the fan and one for polling the
temperature. When suspending/resuming, alarms will never be fired.
As we are checking if there isn't an alarm pending before rescheduling
another one, we end up never checking temperature or updating the
fan speed.
This commit also adds debug messages to be able to spot more easily
if this case happens again in the future. Sorry for the spam if you
activate the debug level though.
Tested-by: Dash Four <mr.dash.four@googlemail.com>
v2:
- fix temperature polling too
Signed-off-by: Martin Peres <martin.peres@labri.fr> Tested-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 12 Aug 2013 02:48:51 +0000 (22:48 -0400)]
drm/nouveau/timer: add a way to cancel alarms
Since alarms don't play well with suspend, it is important every alarm
user cancels his tasks before suspending.
The task should be rescheduled on resume.
Signed-off-by: Martin Peres <martin.peres@labri.fr> Tested-by: Martin Peres <martin.peres@labri.fr> Tested-by: Dash Four <mr.dash.four@googlemail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 12 Aug 2013 02:48:50 +0000 (22:48 -0400)]
drm/nouveau/timer: restore the time on resume
This can be useful if some parts of Nouveau try to calculate the time
between two events. Without this patch, the time difference would be
negative in the case where the computer is suspended/resumed between
two events.
This patch should fix fan speed probing when done while suspending/resuming.
Solve this by saving the current time before suspending and by restoring it
on resume.
Signed-off-by: Martin Peres <martin.peres@labri.fr> Tested-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 12 Aug 2013 02:48:49 +0000 (22:48 -0400)]
drm/nouveau/fan: restore pwm value on resume when in manual/auto mode
If the fan was in manual or auto mode, we should restore the fan speed
that was previously set when resuming.
The initial pwm value is saved when loading the module.
Signed-off-by: Martin Peres <martin.peres@labri.fr> Tested-by: Martin Peres <martin.peres@labri.fr> Tested-by: Dash Four <mr.dash.four@googlemail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Mon, 12 Aug 2013 02:48:48 +0000 (22:48 -0400)]
drm/nouveau/therm: Set the correct pwm_mode upon resume
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Tested-by: Martin Peres <martin.peres@labri.fr> Tested-by: Dash Four <mr.dash.four@googlemail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Tue, 30 Jul 2013 00:01:10 +0000 (01:01 +0100)]
drm/nv50-/disp: use the number of dac, sor, pior rather than hardcoded values
The values are already stored on chipset specific basis in the ctor.
Make the most of them and simplify the code further by using a temporary
variable to avoid code duplication.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Mon, 29 Jul 2013 02:30:06 +0000 (22:30 -0400)]
drm/nouveau/vdec: implement support for VP3 engines
For NV98+, BSP/VP/PPP are all FUC-based engines. Hook them all up in the
same way as NVC0, but with a couple of different values. Also make sure
that the PPP engine is handled in the fifo/mc/vm.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Tue, 3 Sep 2013 23:01:02 +0000 (09:01 +1000)]
Merge tag 'drm/for-3.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.12-rc1
Only a couple of small patches this time around. These are mostly fixes
for minor bugs that showed up, but there is also some preparatory work
that will come in handy for future patches.
* tag 'drm/for-3.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Parse device tree earlier
gpu: host1x: Sort drivers by probe order
gpu: host1x: Check for valid host1x pointer
gpu: host1x: returning success instead of -ENOMEM
gpu: host1x: fix an integer overflow check
drm/tegra: hdmi: Make sure clock is enabled before dumping registers
Ville Syrjälä [Mon, 2 Sep 2013 18:13:39 +0000 (21:13 +0300)]
drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
intel_fixed_panel_mode() overwrote the adjusted_mode with the fixed mode
only partially. Notably it forgot to copy over the sync flags. The LVDS code however programmed the hardware with the sync flags from fixed mode, and then later the pipe config comparison obviously failed as we
filled out the adjusted_mode in get_config from the real registers.
Just call drm_mode_copy() in intel_fixed_panel_mode() to copy over the
whole thing, and then just use adjusted_mode in the LVDS code to figure
out which sync settings the hardware needs.
Also constify the fixed_mode argument to intel_fixed_panel_mode().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Fri, 30 Aug 2013 14:39:26 +0000 (15:39 +0100)]
drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
One needs to call __sg_free_table() if __sg_alloc_table() fails, but
sg_alloc_table() does that for us already.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewd-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Williamson [Wed, 28 Aug 2013 15:39:08 +0000 (09:39 -0600)]
i915: Update VGA arbiter support for newer devices
This is intended to add VGA arbiter support for Intel HD graphics on
Core processors. The old GMCH registers no longer exist, so even
though it appears that i915 participates in VGA arbitration, it doesn't
work. On Intel HD graphics we already attempt to disable VGA regions
of the device. This makes registering as a VGA client unnecessary since
we don't intend to operate differently depending on how many VGA devices
are present. We can disable VGA memory regions by clearing the memory
enable bit in the VGA MSR. That only leaves VGA IO, which we update
the VGA arbiter to know that we don't participate in VGA memory
arbitration. We also add a hook on unload to re-enable memory and
reinstate VGA memory arbitration.
v3: Use explicit LEGACY_IO | LEGACY_MEM when restoring rather than
LEGACY_MASK, per Ville's comments.
v2: I915_READ/WRITE accessors don't work in i915_disable_vga, use inb/outb
directly. Also, on the driver unbind VGA enable path, acquire legacy
IO to re-enable VGA memory. Correct comment.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add patch changelog. Also squash in a fixup to have a dummy
static inline for vga_set_legacy_decoding for CONFIG_VGA_ARB=n as
reported by the 0-day kernel build bot.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
fixup 2
Alex Williamson [Thu, 15 Aug 2013 22:37:59 +0000 (16:37 -0600)]
vgaarb: Fix VGA decodes changes
When VGA decodes change we need to do a bit more evaluation of exactly what
has changed. We don't necessarily give up all the old owns resources and
we need to account for resources with locks. The new algorithm is: If
something is added, update decodes. If legacy resources were added and
none were there before, we have a new participant. If something is
removed, update decodes. If we previously owned it, we no longer own it.
If it was previously locked, invalidate all locks and release it. If
legacy resources were removed and none are left, remove the participant
from VGA arbitration.
Previously we updated decodes, released ownership of everything that was
previously decoded, ignored all locks, and went off looking for another
device to transfer VGA to. In a test case where Intel IGD removes only
legacy VGA memory decoding, this left the arbiter switching to discrete
graphics without actually disabling legacy VGA IO from the IGD. As a
bonus, we bumped up the count of VGA arbitration participants for no
good reason.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Kill now unused variables, reported by the 0-day kernel
builtbot.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
projects / karo-tx-linux.git / log