Commit FIXME ("ARM: shmobile: Consolidate SCU mapping code") removed the
last user of the static mapping on emev2-based systems. Remove the
mapping and the legacy machine_desc.map_io() callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit 37201ba5c99d0be8 ("ARM: shmobile: r8a7740: Migrate to generic l2c
OF initialization") removed the last user of the legacy "IOMEM()" macro
on r8a7740-based systems. Hence there's no longer a need to set up a
transparent mapping of system I/O registers. Remove the mapping and the
legacy machine_desc.map_io() callback.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Currently the SCU registers are mapped in SoC-specific code, using
different methods, all involving the static mapping set up from
machine_desc.map_io():
- On emev2, a static (non-identity) mapping is used, with ioremap().
As the static mapping uses the MT_DEVICE type, ioremap() reuses it,
and the returned virtual address is suitable for passing to
shmobile_smp_hook(),
- On sh73a0 and r8a7779, a static identity mapping is used, with the
legacy IOMEM() macro.
As the static mapping uses the MT_DEVICE_NONSHARED type, replacing
IOMEM() by ioremap() would create a new mapping, whose virtual
address cannot be passed to shmobile_smp_hook().
Move the mapping of the SCU registers from SoC-specific code to common
code, always using ioremap(). To work in the absence of a static
mapping, this requires passing the physical SCU base address to
shmobile_smp_hook().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: Move shmobile_scu_base from .text to .data
shmobile_scu_base is being written to, so it doesn't belong in the .text
section. Fix this by moving it from asm .text to C .data, as it's no
longer used from asm code since commit 4f6da36f7edd5790 ("ARM: shmobile:
Remove old SCU boot code").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
Now all r8a7740-based platforms have been migrated to the generic l2c OF
initialization, it's no longer needed to map the L2 cache controller
registers from .map_io().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit 0ca2894b5a900709 ("ARM: shmobile: Use shared SCU SMP boot code on
r8a7779") obsoleted the r8a7779-specific SCU boot code, but forgot to
remove the setup of shmobile_boot_fn and shmobile_boot_arg, which is
overwritten by shmobile_smp_scu_prepare_cpus().
Note that shmobile_scu_base wasn't initialized at that point yet anyway.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
ARM: dts: koelsch: Enable SCIF_CLK frequency and pins
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates:
- SCIF:
- Supports now 50, 75, 110, 1152000, 1500000, 2000000, and 4000000 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000 bps.
- HSCIF:
- Supports now 50, 75, 110, 134, 150, and 200 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000, 1152000, 3000000, 3500000, and 4000000
bps.
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (S1 and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF device nodes.
This increases the range and accuracy of supported baud rates on SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (S1 and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF device nodes.
This increases the range and accuracy of supported baud rates on SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Linus Torvalds [Tue, 9 Feb 2016 18:15:16 +0000 (10:15 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
API:
- Fix async algif_skcipher, it was broken by recent fixes.
- Fix potential race condition in algif_skcipher with ctx.
- Fix potential memory corruption in algif_skcipher.
- Add missing lock to crypto_user when doing an alg dump.
Drivers:
- marvell/cesa was testing the wrong variable for NULL after
allocation.
- Fix potential double-free in atmel-sha.
- Fix illegal call to sleepin function from atomic context in
atmel-sha"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvell/cesa - fix test in mv_cesa_dev_dma_init()
crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts
crypto: atmel-sha - fix atmel_sha_remove()
crypto: algif_skcipher - Do not set MAY_BACKLOG on the async path
crypto: algif_skcipher - Do not dereference ctx without socket lock
crypto: algif_skcipher - Do not assume that req is unchanged
crypto: user - lock crypto_alg_list on alg dump
J. Bruce Fields [Wed, 10 Jul 2013 20:54:34 +0000 (16:54 -0400)]
scripts: add "prune-kernel" script to clean up old kernel images
Long ago, Dave Jones complained about CONFIG_LOCALVERSION_AUTO:
"I don't use the auto config, because I end up filling up /boot unless
I go through and clean them out by hand every time I install a new one
(which I do probably a dozen or so times a day). Is there some easy
way to prune old builds I'm missing?"
To which Bruce replied:
"I run this by hand every now and then. I'm probably doing it all wrong"
And if he is running it wrong, then so am I - because I've been using
this script ever since. It is true that CONFIG_LOCALVERSION_AUTO easily
ends up filling your /boot partition if you don't clean up old versions
regularly, and this script helps make that easier.
Checked with Bruce to see that it's fine to add this to the kernel
scripts. Maybe people will come up with enhancements, but more
importantly, this way I won't misplace this script whenever I install a
new machine and start doing custom kernels for it.
Alexander Duyck [Tue, 9 Feb 2016 10:49:54 +0000 (02:49 -0800)]
flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
This patch fixes an issue with unaligned accesses when using
eth_get_headlen on a page that was DMA aligned instead of being IP aligned.
The fact is when trying to check the length we don't need to be looking at
the flow label so we can reorder the checks to first check if we are
supposed to gather the flow label and then make the call to actually get
it.
v2: Updated path so that either STOP_AT_FLOW_LABEL or KEY_FLOW_LABEL can
cause us to check for the flow label.
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Mon, 8 Feb 2016 16:26:58 +0000 (17:26 +0100)]
ALSA: timer: Fix race at concurrent reads
snd_timer_user_read() has a potential race among parallel reads, as
qhead and qused are updated outside the critical section due to
copy_to_user() calls. Move them into the critical section, and also
sanitize the relevant code a bit.
Takashi Iwai [Tue, 9 Feb 2016 09:23:52 +0000 (10:23 +0100)]
ALSA: hda - Fix bad dereference of jack object
The hda_jack_tbl entries are managed by snd_array for allowing
multiple jacks. It's good per se, but the problem is that struct
hda_jack_callback keeps the hda_jack_tbl pointer. Since snd_array
doesn't preserve each pointer at resizing the array, we can't keep the
original pointer but have to deduce the pointer at each time via
snd_array_entry() instead. Actually, this resulted in the deference
to the wrong pointer on codecs that have many pins such as CS4208.
This patch replaces the pointer to the NID value as the search key.
As an unexpected good side effect, this even simplifies the code, as
only NID is needed in most cases.
Takashi Iwai [Tue, 9 Feb 2016 11:02:32 +0000 (12:02 +0100)]
ALSA: timer: Fix race between stop and interrupt
A slave timer element also unlinks at snd_timer_stop() but it takes
only slave_active_lock. When a slave is assigned to a master,
however, this may become a race against the master's interrupt
handling, eventually resulting in a list corruption. The actual bug
could be seen with a syzkaller fuzzer test case in BugLink below.
As a fix, we need to take timeri->timer->lock when timer isn't NULL,
i.e. assigned to a master, while the assignment to a master itself is
protected by slave_active_lock.
Denis Kirjanov [Mon, 14 Dec 2015 20:18:06 +0000 (23:18 +0300)]
powerpc/pseries: Don't trace hcalls on offline CPUs
If a cpu is hotplugged while the hcall trace points are active, it's
possible to hit a warning from RCU due to the trace points calling into
RCU from an offline cpu, eg:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
Make the hypervisor tracepoints conditional by using
TRACE_EVENT_FN_COND.
Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/mm: Fix Multi hit ERAT cause by recent THP update
With ppc64 we use the deposited pgtable_t to store the hash pte slot
information. We should not withdraw the deposited pgtable_t without
marking the pmd none. This ensure that low level hash fault handling
will skip this huge pte and we will handle them at upper levels.
Recent change to pmd splitting changed the above in order to handle the
race between pmd split and exit_mmap. The race is explained below.
Consider following race:
CPU0 CPU1
shrink_page_list()
add_to_swap()
split_huge_page_to_list()
__split_huge_pmd_locked()
pmdp_huge_clear_flush_notify()
// pmd_none() == true
exit_mmap()
unmap_vmas()
zap_pmd_range()
// no action on pmd since pmd_none() == true
pmd_populate()
As result the THP will not be freed. The leak is detected by check_mm():
The above required us to not mark pmd none during a pmd split.
The fix for ppc is to clear the huge pte of _PAGE_USER, so that low
level fault handling code skip this pte. At higher level we do take ptl
lock. That should serialze us against the pmd split. Once the lock is
acquired we do check the pmd again using pmd_same. That should always
return false for us and hence we should retry the access. We do the
pmd_same check in all case after taking plt with
THP (do_huge_pmd_wp_page, do_huge_pmd_numa_page and
huge_pmd_set_accessed)
Also make sure we wait for irq disable section in other cpus to finish
before flipping a huge pte entry with a regular pmd entry. Code paths
like find_linux_pte_or_hugepte depend on irq disable to get
a stable pte_t pointer. A parallel thp split need to make sure we
don't convert a pmd pte to a regular pmd entry without waiting for the
irq disable section to finish.
Fixes: eef1b3ba053a ("thp: implement split_huge_pmd()") Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aaro Koskinen [Wed, 3 Feb 2016 19:35:29 +0000 (21:35 +0200)]
of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities.
Commit ae461131960b ("of: of_mdio: Add a whitelist of PHY
compatibilities.") missed one compatible string used in in-tree DTBs:
in OCTEON, for selected boards, the kernel DTB pruning code will overwrite
the DTB compatible string with "marvell,88e1145", which is missing
from the whitelist. Add it.
The patch fixes broken networking on EdgeRouter Lite.
Fixes: ae461131960b ("of: of_mdio: Add a whitelist of PHY compatibilities.") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
This device tree is based on the board file:
arch/arm/mach-orion5x/kurobox_pro-setup.c
However, that board file also support Kurobox Pro, which is not supported by
device tree yet. So the board file is not removed.
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Roger Shimizu [Sat, 6 Feb 2016 05:59:52 +0000 (14:59 +0900)]
ARM: dts: orion5x: split linkstation lswtgl into common and device parts
In order to support more linkstation devices, common part of current
.dts file goes into .dtsi file. Some .dtsi start with "mvebu-" prefix
because other kirkwood based linkstation devices are similar, and
will be migrated to use these .dtsi some time later.
- orion5x-linkstation.dtsi
- mvebu-linkstation-fan.dtsi
- mvebu-linkstation-gpio-simple.dtsi
while all rest part remains in device specific .dts file:
- orion5x-linkstation-lswtgl.dts
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thomas Petazzoni [Wed, 27 Jan 2016 15:08:20 +0000 (16:08 +0100)]
ARM: dts: armada-38x: add reference to ETH connectors for A385-AP
This commit adds some comments to the Armada 385 AP Device Tree
description to indicate which Ethernet interface matches which
physical connector on the board.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thomas Petazzoni [Wed, 27 Jan 2016 15:08:19 +0000 (16:08 +0100)]
ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38x
On Armada 38x, the available network interfaces are:
- port 0, at 0x70000
- port 1, at 0x30000
- port 2, at 0x34000
Due to the rule saying that DT nodes should be ordered by register
addresses, the network interfaces are probed in this order:
- port 1, at 0x30000, which gets named eth0
- port 2, at 0x34000, which gets named eth1
- port 0, at 0x70000, which gets named eth2
(if all three ports are enabled at the board level)
Unfortunately, the network subsystem doesn't provide any way to rename
network interfaces from the kernel (it can only be done from
userspace). So, the default naming of the network interfaces is very
confusing as it doesn't match the datasheet, nor the naming of the
interfaces in the bootloader, nor the naming of the interfaces on
labels printed on the board.
For example, on the Armada 388 GP, the board has two ports, labelled
GE0 and GE1. One has to know that GE0 is eth1 and GE1 is eth0, which
isn't really obvious.
In order to solve this, this patch proposes to exceptionaly violate
the rule of "order DT nodes by register address", and put the 0x70000
node before the 0x30000 node, so that network interfaces get named in
a more natural way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
ARM: dts: kirkwood: use unique machine name for ds112
Downstream packages like Debian flash-kernel use
/proc/device-tree/model
to determine which dtb file to install.
Hence each dts in the Linux kernel should provide a unique model
identifier.
Commit 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS
devices") created the new files kirkwood-ds111.dts and kirkwood-ds112.dts
using the same model identifier.
This patch provides a unique model identifier for the
Synology DiskStation DS112.
Fixes: 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Mario Lange [Mon, 25 Jan 2016 16:44:10 +0000 (01:44 +0900)]
ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvl
Add dts file to support Buffalo Linkstation LS-QVL,
which is marvell kirkwood based 4-bay 3.5" HDD NAS.
Product info:
- (JPN) http://buffalo.jp/product/hdd/network/ls-qvl_r5/
- (ENG) http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-pro-quad
Signed-off-by: Mario Lange <mario_lange@gmx.net> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Aaro Koskinen [Sat, 23 Jan 2016 22:36:39 +0000 (00:36 +0200)]
ARM: dts: kirkwood: fix audio for OpenRD clients
Fix audio on kirkwood-openrd-client:
1) The audio-controller was left disabled.
2) The probe fails because cs42l51 is missing #sound-dai-cells.
/sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp@f1000000/i2c@11000/cs42l51@4a
asoc-simple-card sound: parse error -22
asoc-simple-card: probe of sound failed with error -22
3) The mapping is incorrect:
asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok
should be:
asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok
Reported-by: Rick Thomas <rbthomas@pobox.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Rick Thomas <rbthomas@pobox.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Roger Shimizu [Thu, 21 Jan 2016 14:38:50 +0000 (23:38 +0900)]
ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl
LS-WVL/VL are both kirkwood-6282 based NAS devices, which share
many MPP pins. However they are slightly different:
- LS-WVL is 2-Bay NAS, and LS-VL is only 1-Bay.
- There're two red LED indicator on LS-WVL to show when HDD fails,
which is similar to LS-WXL, but there's no such on LS-VL.
So after the split, common part goes into .dtsi file:
- kirkwood-linkstation-6282.dtsi
while all rest part goes into device specific .dts file:
- kirkwood-linkstation-lsvl.dts
- kirkwood-linkstation-lswvl.dts
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Roger Shimizu [Thu, 21 Jan 2016 14:38:49 +0000 (23:38 +0900)]
ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl
LS-WXL/WSXL are both kirkwood-6281 based 2-Bay NAS devices, which share
many MPP pins. However they are slightly different:
- There're two red LED indicator on LS-WXL to show when HDD fails,
but there's no such on LS-WSXL.
- There's 4-level speed adjustable FAN on LS-WXL, but not LS-WSXL.
So after the split, common part goes into .dtsi file:
- kirkwood-linkstation.dtsi
- kirkwood-linkstation-duo-6281.dtsi
while all rest part goes into device specific .dts file:
- kirkwood-linkstation-lswsxl.dts
- kirkwood-linkstation-lswxl.dts
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Aaro Koskinen [Tue, 12 Jan 2016 20:07:33 +0000 (22:07 +0200)]
ARM: dts: kirkwood: fix SD slot default configuration for OpenRD
The SD card slot was enabled by default with legacy booting.
It does not work anymore with DT boot. Fix by providing GPIO configuration
that matches the old default.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
projects / karo-tx-linux.git / log