Ville Syrjälä [Fri, 10 Jan 2014 09:28:07 +0000 (11:28 +0200)]
drm/i915: Prepare to track new pipe config per pipe
Add a new_config pointer to intel_crtc which will point to the new pipe
config for said crtc while intel_crtc.config will still contain the old
config during first parts of the modeset operation. This is a step
towards having the entire new state available during the compute phase,
so that we can make accurate decisions about global resource usage.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 10 Jan 2014 09:28:06 +0000 (11:28 +0200)]
drm/i915: Pre-compute pipe enabled state
Add 'new_enabled' to intel_crtc and precompute it alongside new_encoder
and new_crtc. This will allow making decisions about shared resources
that are affected by the set of active pipes, before we've clobbered
anything for real.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I've left the masking in the pageflip code since that seems to be some
useful piece of preemptive robustness.
Iirc I've merged this patch under the assumption that the BIOS leaves
some random gunk in the lower bits and gets unhappy if we trample on
them. We have quite a few case like this, so this made sense.
Now I've just learned that there's actual hardware features bits in
the low 12 bits, and the kernel needs to preserve them to allow a
userspace blob to do its job. Given Dave Airlie's clear stance on
userspace blob drivers I've quickly chatted with him and he doesn't
seem too happy. So let's revert this.
If there are indeed bits that we must preserve in this range then we
can ressurrect this patch, but with proper documentation for those
bits supplied. And we probably also need to think a bit about
interactions with our driver.
Cc: Armin Reese <armin.c.reese@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Todd Previte [Thu, 23 Jan 2014 07:13:41 +0000 (00:13 -0700)]
drm/i915: VLV2 - Fix hotplug detect bits
Add new definitions for hotplug live status bits for VLV2 since they're
in reverse order from the gen4x ones.
Changelog:
- Restored gen4 bit definitions
- Added new definitions for VLV2
- Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct
bit defintions
- Replaced a lost trailing brace for the added switch()
Signed-off-by: Todd Previte <tprevite@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951
[danvet: Switch to _VLV postfix instead of prefix and regroupg
comments again so that the g4x warning is right next to those defines.
Also add a _G4X suffix for those special ones. Also cc stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 20 Jan 2014 10:17:37 +0000 (10:17 +0000)]
drm/i915: Repeat evictions whilst pageflip completions are outstanding
Since an old pageflip will keep its scanout buffer object pinned until
it has executed its unpin task on the common workqueue, we can clog up
our GGTT with stale pinned objects. As we cannot flush those workqueues
without dropping our locks, we have to resort to falling back to
userspace and telling them to repeat the operation in order to have a
chance to run our workqueues and free up the required memory. If we
fail, then we are forced to report ENOSPC back to userspace causing the
operation to fail and best-case scenario is that it introduces temporary
corruption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 20 Jan 2014 10:17:36 +0000 (10:17 +0000)]
drm/i915: Wait for completion of pending flips when starved of fences
On older generations (gen2, gen3) the GPU requires fences for many
operations, such as blits. The display hardware also requires fences for
scanouts and this leads to a situation where an arbitrary number of
fences may be pinned by old scanouts following a pageflip but before we
have executed the unpin workqueue. This is unpredictable by userspace
and leads to random EDEADLK when submitting an otherwise benign
execbuffer. However, we can detect when we have an outstanding flip and
so cause userspace to wait upon their completion before finally
declaring that the system is starved of fences. This is really no worse
than forcing the GPU to stall waiting for older execbuffer to retire and
release their fences before we can reallocate them for the next
execbuffer.
v2: move the test for a pending fb unpin to a common routine for
later reuse during eviction
Reported-and-tested-by: dimon@gmx.net
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73696 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Fri, 17 Jan 2014 13:46:43 +0000 (15:46 +0200)]
drm/i915: don't disable DP port after a failed link training
Atm after a failed link training we disable the DP port. This can happen
during a modeset-enable or a DP link re-establishment. The latter can be
a problem and we shouldn't disable the DP port, see the previous patch for
the reasoning. In the former case the right thing would be to disable
the DP port, but also the rest of the pipe.
As a stop-gap solution leave the DP port enabled in both cases. It is an
improvement on its own (avoiding HW lock ups) and the proper solution
for the first case requires a bigger change, so let's keep that on the
TODO list.
v2:
- fix explanation of change impact (Chris)
Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Thu, 16 Jan 2014 16:35:57 +0000 (18:35 +0200)]
drm/i915: don't disable the DP port if the link is lost
Currently if the DP link is lost (either because of a hot unplug, or
failed link status check) we disable the DP port, but leave the rest
of the pipe running. This is incompatible with the modeset disabling
sequence of some platforms/configurations. At least this is the case for
DP ports on the CPU as opposed to PCH.
Atm we'll also get a warning when we do a modeset disable after the
above link lost event, since we expect the DP port to be enabled at this
point (see the bugzilla ticket for the related dmesg).
Note that with this patch we'll still end up disabling the port, thanks
to the HPD uevent and subsequent modeset disable.
See also the next patch fixing the other half of this issue.
Solution suggested by Ville.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70570 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 16 Jan 2014 16:27:15 +0000 (18:27 +0200)]
drm/i915: Eliminate lots of WARNs when there's no backlight present
My 855gm doesn't register the intel backlight but it still ends up
calling the backlight code to enable/disable the backlight via the
LVDS code. This leads to some WARNs due to backlight.max being 0.
Let's have intel_panel_enable_backlight() and intel_panel_disable_backlight()
check whether there's a backlight present or not.
Also move the backlight.present check from asle_set_backlight() into
intel_panel_set_backlight() for some extra symmetry.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72210
Signed off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 1 Jan 2014 18:15:13 +0000 (10:15 -0800)]
drm/i915/ppgtt: Defer request freeing on reset
We need to defer the free request until the object/vma is capable of
being freed - or else we have a problem when we try to destroy the
context.
The exact same issue is described and fixed here:
commit e20780439b26ba95aeb29d3e27cd8cc32bc82a4c
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Fri Dec 6 14:11:22 2013 -0800
drm/i915: Defer request freeing
I had this fix previously, but decided not to keep it for some reason I
can no longer remember.
gem_reset_stats is a really good test at hitting the problem.
Note: This is a bug that only hits the ppgtt topic branch but I've
figured that doing the request cleanup in this order is generally the
right thing to do.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add a code comment to clarify what's actually going on since
the lifetime rules aroung ppgtt cleanup are ... fuzzy a best atm. Also
add a note about why we need this.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 14 Jan 2014 10:40:54 +0000 (11:40 +0100)]
drm/i915: Tune down reset_stat output from ERROR to debug
This is user-triggerable and hence we should not allow it to spam
dmesg. Also, it upsets the nice dmesg tracking piglit does.
Note that this is just extra debugging information, mostly
unwanted, in case of a hang and that there is a separate message to the
user giving instructions on how to report a bug for a GPU hang.
v2: Add note as suggests in Chris' reply.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72740 Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 17 Dec 2013 23:06:42 +0000 (15:06 -0800)]
drm/i915: Make semaphore modparam RO
A couple patches in the upcoming rework of semaphores will break if
semaphores are toggled by the user at various times. Since the code
cleanups there seem to be an overall win, and toggling semaphores at
runtime is not a terribly useful thing to do, simply make the module
parameter read-only.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 26 Dec 2013 21:39:50 +0000 (13:39 -0800)]
drm/i915: Clarify relocation errnos
While trying to find a random -EINVAL from a failing test, I noticed we
had a few hard to follow return values.
The first two hunks in this patch replace completely useless
initialization of ret. The last several hunks help to distinguish
between altering 'return ret' and 'return <ERROR>'
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Tue, 21 Jan 2014 23:13:13 +0000 (09:13 +1000)]
Merge branch 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux into drm-next
Here's the vblank timestamp pull request you wanted.
I addressed the few bugs that Mario pointed out and added
the r-bs.
As it has been a while since I made the changes, I gave it a
quick spin on a few different i915 machines. Fortunately
everything still seems to be fine.
* 'drm-vbl-timestamp' of git://gitorious.org/vsyrjala/linux:
drm/i915: Add a kludge for DSL incrementing too late and ISR not working
drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos()
drm: Pass 'flags' from the caller to .get_scanout_position()
drm: Fix vblank timestamping constants for interlaced modes
drm/i915: Fix scanoutpos calculations for interlaced modes
drm: Change {pixel,line,frame}dur_ns from s64 to int
drm: Use crtc_clock in drm_calc_timestamping_constants()
drm/radeon: Populate crtc_clock in radeon_atom_get_tv_timings()
drm: Simplify the math in drm_calc_timestamping_constants()
drm: Improve drm_calc_timestamping_constants() documentation
drm/i915: Call drm_calc_timestamping_constants() earlier
drm/i915: Kill hwmode save/restore
drm: Pass the display mode to drm_calc_vbltimestamp_from_scanoutpos()
drm: Pass the display mode to drm_calc_timestamping_constants()
Dave Airlie [Tue, 21 Jan 2014 23:11:39 +0000 (09:11 +1000)]
Merge branch 'topic/core-stuff' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Some straggling drm core patches
* 'topic/core-stuff' of git://people.freedesktop.org/~danvet/drm-intel:
drm/gem: Always initialize the gem object in object_init
drm/edid: Populate picture aspect ratio for CEA modes
drm/edid: parse the list of additional 3D modes
drm/edid: split VIC display mode lookup into a separate function
drm: Make the connector mode_valid() vfunc return a drm_mode_status enum
Daniel Vetter [Mon, 20 Jan 2014 07:21:54 +0000 (08:21 +0100)]
drm/gem: Always initialize the gem object in object_init
At least drm/i915 expects that the obj->dev pointer is set even in
failure paths. Specifically when the shmem initialization fails we
call i915_gem_object_free which needs to deref obj->base.dev to get at
the slab pointer in the device private structure. And the shmem
allocation can easily fail when userspace is hitting open file limits.
Doing the structure init even when the shmem file allocation fails
prevents this Oops.
Dave Airlie [Tue, 21 Jan 2014 00:26:50 +0000 (10:26 +1000)]
Merge branch 'drm-next-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-next
New tree with the INFO ioctl merge fixed up. This also adds a couple
of additional minor fixes.
A few more changes for 3.14, mostly just bug fixes. Note that:
drm/radeon: add query to fetch the max engine clock.
will conflict with 3.13 final, but the fix is pretty obvious.
* 'drm-next-3.14' of git://people.freedesktop.org/~agd5f/linux: (22 commits)
drm/radeon: add UVD support for OLAND
drm/radeon: fix minor typos in si_dpm.c
drm/radeon: set the full cache bit for fences on r7xx+
drm/radeon: fix surface sync in fence on cayman (v2)
drm/radeon/dpm: disable mclk switching on desktop RV770
drm/radeon: fix endian handling in radeon_atom_init_mc_reg_table
drm/radeon: write gfx pg bases even when gfx pg is disabled
drm/radeon: bail early from enable ss in certain cases
drm/radeon: handle ss percentage divider properly
drm/radeon: add query to fetch the max engine clock (v2)
drm/radeon/dp: sleep after powering up the display
drm/radeon/dp: use usleep_range rather than udelay
drm/radeon/dp: bump i2c-over-aux retries to 7
drm/radeon: disable ss on DP for DCE3.x
drm/radeon/cik: use hw defaults for TC_CFG registers
drm/radeon: disable dpm on BTC
drm/radeon/cik: use WAIT_REG_MEM special op for CP HDP flush
drm/radeon/cik: use POLL_REG_MEM special op for sDMA HDP flush
drm/radeon: consolidate sdma hdp flushing code for CIK
drm/radeon: consolidate cp hdp flushing code for CIK
...
Alex Deucher [Tue, 7 Jan 2014 18:51:51 +0000 (13:51 -0500)]
drm/radeon/dpm: disable mclk switching on desktop RV770
Mclk switching doesn't seem to work reliably on these
cards. Most RV770 boards specify the same mclk for all
performance levels anyway so in most cases, this has
no affect.
Alex Deucher [Mon, 20 Jan 2014 23:20:29 +0000 (18:20 -0500)]
drm/radeon: add query to fetch the max engine clock (v2)
This is needed for reporting the max GPU engine clock
in OpenCL. This just reports the max possible engine
clock, it does not take into account current conditions
that may limit that clock.
v2: fix query number for merge with 3.13
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Wood [Fri, 29 Nov 2013 18:18:58 +0000 (18:18 +0000)]
drm/edid: parse the list of additional 3D modes
Parse 2D_VIC_order_X and 3D_Structure_X from the list at the end of the
HDMI Vendor Specific Data Block.
v2: Use an offset value depending on 3D_Multi_present and add
detail_present. (Ville Syrjälä)
v3: Make sure the list is parsed even if 3D_Structure_ALL/MASK is not
present. (Ville Syrjälä)
Fix one length check and remove another. (Ville Syrjälä)
Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thomas Wood [Fri, 29 Nov 2013 15:33:27 +0000 (15:33 +0000)]
drm/edid: split VIC display mode lookup into a separate function
Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 28 Oct 2013 22:04:43 +0000 (00:04 +0200)]
drm/i915: Add a kludge for DSL incrementing too late and ISR not working
On pre-PCH platforms ISR doesn't seem to be an actual ISR, at least as
far as display interrupts are concerned. Instead it sort of looks like
some ISR bits just directly reflect the corresponding bit from PIPESTAT.
The bit appears in the ISR only if the PIPESTAT interrupt is enabled. So
in that sense it sort of looks a bit like the south interrupt scheme on
PCH platforms. So it goes something a bit like this:
PIPESTAT.status & PIPESTAT.enable -> ISR -> IMR -> IIR -> IER -> actual
interrupt
In any case that means the intel_pipe_in_vblank_locked() doesn't actually
work for pre-PCH platforms. As a last resort, add a similar kludge as radeon
has that fixes things up if we got called from the vblank interrupt,
but the scanline counter value indicates that we're not quite there yet.
We know that the scanline counter increments at hsync but is otherwise
accurate, so we can limit the kludge to the line just prior to vblank
start, instead of the relative distance that radeon uses.
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Mon, 28 Oct 2013 19:22:52 +0000 (21:22 +0200)]
drm/radeon: Move the early vblank IRQ fixup to radeon_get_crtc_scanoutpos()
i915 doesn't need this kludge for most platforms. Although we do
appear to need something similar on certain platforms, but we can
be more accurate when we apply the adjustment since we know exactly
why the scanline counter doesn't always quite match the vblank
status.
Also the current code doesn't handle interlaced modes correctly,
and we already deal with interlaced modes in i915 code.
So let's just move the current code to radeon_get_crtc_scanoutpos()
since that's why it was added. For i915 we'll add a more finely
targeted variant.
v2: Fix vpos vs. *vpos bug (Mario)
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Mon, 28 Oct 2013 17:53:25 +0000 (19:53 +0200)]
drm: Fix vblank timestamping constants for interlaced modes
We're currently miscalculating the line and pixel durations for
interlaced modes. crtc_htotal and crtc_vtotal are the full frame
timings, and so is crtc_clock, so we can compute the line
and pixel durations from those w/o any extra adjustments. But
we actually want framedur_ns to be the field, not frame, duration,
so we must divide it by two.
This should make the scanout based vblank timestamp corrections
work correctly with interlaced modes, at least for i915. It all
depends whether we keep the field or frame timings in the display
mode crtc_ timings.
v2: Preserve halve->half typo fix that happened in the meantine
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Mon, 28 Oct 2013 14:31:41 +0000 (16:31 +0200)]
drm/i915: Fix scanoutpos calculations for interlaced modes
The scanline counter counts lines in the current field, not the entire
frame. But the crtc_ timings are the values for the entire frame. Divide
the vertical timings by 2 to make them match the scanline counter.
The rounding was carefully chosen to make it do the right thing wrt. the
observed scanline counter and ISR vblank bit behaviour.
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Sat, 26 Oct 2013 14:38:52 +0000 (17:38 +0300)]
drm: Change {pixel,line,frame}dur_ns from s64 to int
Using s64 for the timestamping constants is wasteful. Signed 32bit
integers get us a range of over +-2 seconds. Presuming that no-one
wants to a vrefresh rate less than 0.5, we can switch to using int
for the timestamping constants. We save a few bytes in drm_crtc and
avoid a bunch of 64bit math.
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Sun, 27 Oct 2013 19:22:58 +0000 (21:22 +0200)]
drm: Use crtc_clock in drm_calc_timestamping_constants()
drm_calc_timestamping_constants() computes the pixel/line/frame
durations based on the crtc_ timing values. The corresponding pixel
clock is in mode->crtc_clock, so we need to use that instead of
mode->clock.
This should fix drm_calc_timestamping_constants() for frame packing
stereo modes.
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Sun, 27 Oct 2013 19:20:10 +0000 (21:20 +0200)]
drm/radeon: Populate crtc_clock in radeon_atom_get_tv_timings()
crtc_clock is now supposed to be the actual pixel clock corresponding to
the other crtc_ timing values. Populate crtc_clock appropriately in
radeon_atom_get_tv_timings().
This was the only obvious place where we frob with the crtc_ timigns
directly instead of calling drm_mode_set_crtcinfo() which would also
update crtc_clock.
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Sat, 26 Oct 2013 14:11:01 +0000 (17:11 +0300)]
drm: Simplify the math in drm_calc_timestamping_constants()
drm_calc_timestamping_constants() makes the math more complex
than necessary.
- multipying the dotclock by 1000 is pointless, just makes all the
numbers bigger
- div64_u64() is also pointless, div_u64 is enough
- pixeldur_ns doesn't need any 64bit math
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Update the pixel/line/frame duration information when we switch to the
new pipe config. This will keep the timestamping constants in better
sync with the real hardware state.
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Sat, 26 Oct 2013 14:57:31 +0000 (17:57 +0300)]
drm: Pass the display mode to drm_calc_vbltimestamp_from_scanoutpos()
Rather than using crtc->hwmode, just pass the relevant mode to
drm_calc_vbltimestamp_from_scanoutpos(). This removes the last hwmode
usage from core drm.
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Sat, 26 Oct 2013 14:16:30 +0000 (17:16 +0300)]
drm: Pass the display mode to drm_calc_timestamping_constants()
We don't really use hwmode anymore in i915, so eliminating its use
from the core code seems prudent. Just pass the appropriate mode
to drm_calc_timestamping_constants().
Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Dave Airlie [Mon, 20 Jan 2014 00:21:54 +0000 (10:21 +1000)]
Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
(but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over
Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.
* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
drm/i915/bdw: make sure south port interrupts are enabled properly v2
drm/i915: Include more information in disabled hotplug interrupt warning
drm/i915: Only complain about a rogue hotplug IRQ after disabling
drm/i915: Only WARN about a stuck hotplug irq ONCE
drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
Dave Airlie [Mon, 20 Jan 2014 00:03:27 +0000 (10:03 +1000)]
Merge tag 'vmwgfx-next-2014-01-17' of git://people.freedesktop.org/~thomash/linux into drm-next
Pull request of 2014-01-17
Pull request for 3.14. One not so urgent fix, One huge device update.
The pull request corresponds to the patches sent out on dri-devel, except:
[PATCH 02/33], review tag typo pointed out by Matt Turner.
[PATCH 04/33], dropped. The new surface formats are never used.
The upcoming vmware svga2 hardware version 11 will introduce the concept
of "guest backed objects" or -resources. The device will in principle
get all
of its memory from the guest, which has big advantages from the device
point of view.
This means that vmwgfx contexts, shaders and surfaces need to be backed
by guest memory in the form of buffer objects called MOBs, presumably
short for MemoryOBjects, which are bound to the device in a special way.
This patch series introduces guest backed object support. Some new IOCTLs
are added to allocate these new guest backed object, and to optionally
provide
them with a backing MOB.
There is an update to the gallium driver that comes with this update, and
it will be pushed in the near timeframe presumably to a separate mesa branch
before merged to master.
* tag 'vmwgfx-next-2014-01-17' of git://people.freedesktop.org/~thomash/linux: (33 commits)
drm/vmwgfx: Invalidate surface on non-readback unbind
drm/vmwgfx: Silence the device command verifier
drm/vmwgfx: Implement 64-bit Otable- and MOB binding v2
drm/vmwgfx: Fix surface framebuffer check for guest-backed surfaces
drm/vmwgfx: Update otable definitions
drm/vmwgfx: Use the linux DMA api also for MOBs
drm/vmwgfx: Ditch the vmw_dummy_query_bo_prepare function
drm/vmwgfx: Persistent tracking of context bindings
drm/vmwgfx: Track context bindings and scrub them upon exiting execbuf
drm/vmwgfx: Block the BIND_SHADERCONSTS command
drm/vmwgfx: Add a parameter to get max MOB memory size
drm/vmwgfx: Implement a buffer object synccpu ioctl.
drm/vmwgfx: Make sure that the multisampling is off
drm/vmwgfx: Extend the command verifier to handle guest-backed on / off
drm/vmwgfx: Fix up the vmwgfx_drv.h header for new files
drm/vmwgfx: Enable 3D for new hardware version
drm/vmwgfx: Add new unused (by user-space) commands to the verifier
drm/vmwgfx: Validate guest-backed shader const commands
drm/vmwgfx: Add guest-backed shaders
drm/vmwgfx: Hook up guest-backed surfaces
...
drm/vmwgfx: Invalidate surface on non-readback unbind
Fixes error messages in vmware.log
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Michael Banack <banackm@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Thu, 10 Oct 2013 16:52:52 +0000 (09:52 -0700)]
drm/vmwgfx: Ditch the vmw_dummy_query_bo_prepare function
Combine it with vmw_dummy_query_bo_create, and also make sure
we use tryreserve when reserving the bo to avoid any lockdep warnings
We are sure the tryreserve will always succeed since we are
the only users at that point.
In addition, allow the vmw_bo_pin function to pin/unpin system memory.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Zack Rusin [Wed, 21 Nov 2012 11:25:33 +0000 (12:25 +0100)]
drm/vmwgfx: Make sure that the multisampling is off
By default SVGA device creates nonmaskable multisampling surfaces, in
which case multisampleCount of 1 means: the first quality setting
of nonmaskable multisampling surface. Lets change it to make sure
that the backends know that multisampling is really off.
Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
Thomas Hellstrom [Wed, 21 Nov 2012 10:29:13 +0000 (11:29 +0100)]
drm/vmwgfx: Detach backing store from its resources when it is evicted
When the backing store buffer is evicted, Issue a readback from the
resources and notify the resources that they are no longer bound to
a valid backing store.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com>
Thomas Hellstrom [Wed, 21 Nov 2012 10:06:22 +0000 (11:06 +0100)]
drm/vmwgfx: Hook up MOBs to TTM as a separate memory type
To bind a buffer object as a MOB, just validate it as a MOB
memory type. We are reusing the GMRID manager, although we create a new
instance of it to manage MOB ids and tomake sure we don't exceed
the maximum amount of MOB pages.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
Thomas Hellstrom [Wed, 21 Nov 2012 09:37:20 +0000 (10:37 +0100)]
drm/vmwgfx: Adapt capability reporting to new hardware version
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com>
Conflicts:
drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
Thomas Hellstrom [Wed, 21 Nov 2012 09:23:14 +0000 (10:23 +0100)]
drm/vmwgfx: Update the driver user-space interface for guest-backed objects
Not hooked up yet. This is only the definition.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com>
Conflicts:
include/uapi/drm/vmwgfx_drm.h
Thomas Hellstrom [Wed, 15 Jan 2014 19:19:53 +0000 (20:19 +0100)]
drm/vmwgfx: Fix the driver for large dma addresses
With dma compliance / IOMMU support added to the driver in kernel 3.13,
the dma addresses can exceed 44 bits, which is what we support in
32-bit mode and with GMR1.
So in 32-bit mode and optionally in 64-bit mode, restrict the dma
addresses to 44 bits, and strip the old GMR1 code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org
projects / karo-tx-linux.git / log