Markus Pargmann [Sat, 11 Jan 2014 13:48:30 +0000 (14:48 +0100)]
ASoC: codec: tlv320aic32x4: Fix regmap range config
This codec driver fails to probe because it has a higher regmap
range_max value than max_register. This patch sets the range_max to the
max_register value as described in the for struct regmap_range_cfg:
"@range_max: Address of the highest register in virtual range."
Fixes: 4d208ca429ad (ASoC: tlv320aic32x4: Convert to direct regmap API usage) Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org (v3.13 if the fix misses -final)
Note, the crash came from stressing the deletion and reading of debugfs
files. I was not able to recreate this via normal files. But I'm not
sure they are safe. It may just be that the race window is much harder
to hit.
What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().
The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct. Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here. (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).
Note, this is a hack, but it fixes the problem at hand. A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback. But that is a major job to do, and requires a
lot of work. For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.
do_huge_pmd_wp_page() tests is_huge_zero_pmd(orig_pmd) four times: but
since shrink_huge_zero_page() can free the huge_zero_page, and we have
no hold of our own on it here (except where the fourth test holds
page_table_lock and has checked pmd_same), it's possible for it to
answer yes the first time, but no to the second or third test. Change
all those last three to tests for NULL page.
(Note: this is not the same issue as trinity's DEBUG_PAGEALLOC BUG
in copy_page_rep with RSI: ffff88009c422000, reported by Sasha Levin
in https://lkml.org/lkml/2013/3/29/103. I believe that one is due
to the source page being split, and a tail page freed, while copy
is in progress; and not a problem without DEBUG_PAGEALLOC, since
the pmd_same check will prevent a miscopy from being made visible.)
When queue_mode is NULL_Q_MQ and null_blk is being removed,
blk_cleanup_queue() isn't called to cleanup queue, so the queue
allocated won't be freed.
This patch calls blk_cleanup_queue() for MQ to drain all pending
requests first and release the reference counter of queue kobject, then
blk_mq_free_queue() will be called in queue kobject's release handler
when queue kobject's reference counter drops to zero.
Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
"Famouse last words: "final pull request" :-)
I'm sending this because Jason Wang's fixes are pretty important
1) Add missing per-cpu stats initialization to ip6_vti. Otherwise
lockdep spits out a call trace. From Li RongQing.
2) Fix NULL oops in wireless hwsim, from Javier Lopez
3) TIPC deferred packet queue unlink must NULL out skb->next to avoid
crashes. From Erik Hugne
4) Fix access to uninitialized buffer in nf_nat netfilter code, from
Daniel Borkmann
5) Fix lifetime of ipv6 loopback and SIT tunnel addresses, otherwise
they basically timeout immediately. From Hannes Frederic Sowa
6) Fix DMA unmapping of TSO packets in bnx2x driver, from Michal
Schmidt
7) Do not allow L2 forwarding offload via macvtap device, the way
things are now it will not end up being forwaded at all. From
Jason Wang
8) Fix transmit queue selection via ndo_dfwd_start_xmit(), fixing
things like applying NETIF_F_LLTX to the wrong device (!!) and
eliding the proper transmit watchdog handling
9) qlcnic driver was not updating tx statistics at all, from Manish
Chopra"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
qlcnic: Fix ethtool statistics length calculation
qlcnic: Fix bug in TX statistics
net: core: explicitly select a txq before doing l2 forwarding
macvlan: forbid L2 fowarding offload for macvtap
bnx2x: fix DMA unmapping of TSO split BDs
ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME
bnx2x: prevent WARN during driver unload
tipc: correctly unlink packets from deferred packet queue
ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c
netfilter: only warn once on wrong seqadj usage
netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper
NFC: Fix target mode p2p link establishment
iwlwifi: add new devices for 7265 series
mac80211: move "bufferable MMPDU" check to fix AP mode scan
mac80211_hwsim: Fix NULL pointer dereference
Linus Torvalds [Fri, 10 Jan 2014 23:33:03 +0000 (06:33 +0700)]
Merge tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
"Here we have a bugfix for an off-by-one in the remote attribute
verifier that results in a forced shutdown which you can hit with v5
superblock by creating a 64k xattr, and a fix for a missing
destroy_work_on_stack() in the allocation worker.
It's a bit late, but they are both fairly straightforward"
* tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs:
xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
xfs: fix off-by-one error in xfs_attr3_rmt_verify
Linus Torvalds [Fri, 10 Jan 2014 23:26:27 +0000 (06:26 +0700)]
Merge branch 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED fix from Bryan Wu:
"Pali Rohár and Pavel Machek reported the LED of Nokia N900 doesn't
work with our latest 3.13-rc6 kernel. Milo fixed the regression here"
* 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
leds: lp5521/5523: Remove duplicate mutex
Linus Torvalds [Fri, 10 Jan 2014 23:25:02 +0000 (06:25 +0700)]
Merge tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
- Recent commits modifying the lists of C-states in the intel_idle
driver introduced bugs leading to crashes on some systems. Two fixes
from Jiang Liu.
- The ACPI AC driver should receive all types of notifications, but
recent change made it ignore some of them. Fix from Alexander Mezin.
- intel_pstate's validity checks for MSRs it depends on are not
sufficient to catch the lack of support in nested KVM setups, so they
are extended to cover that case. From Dirk Brandewie.
- NEC LZ750/LS has a botched up _BIX method in its ACPI tables, so our
ACPI battery driver needs a quirk for it. From Lan Tianyu.
- The tpm_ppi driver sometimes leaks memory allocated by
acpi_get_name(). Fix from Jiang Liu.
* tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: close avn_cstates array with correct marker
Revert "intel_idle: mark states tables with __initdata tag"
ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS
intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
ACPI / TPM: fix memory leak when walking ACPI namespace
ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY
Linus Torvalds [Fri, 10 Jan 2014 23:23:57 +0000 (06:23 +0700)]
Merge tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes
Pull MFD fix from Samuel Ortiz:
"This is the 2nd MFD pull request for 3.13
It only contains one fix for the rtsx_pcr driver. Without it we see a
kernel panic on some machines, when resuming from suspend to RAM"
* tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
mfd: rtsx_pcr: Disable interrupts before cancelling delayed works
Milo Kim [Tue, 3 Dec 2013 01:21:44 +0000 (17:21 -0800)]
leds: lp5521/5523: Remove duplicate mutex
It can be a problem when a pattern is loaded via the firmware interface.
LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'.
So it should be deleted.
On the other hand, locks are required in store_engine_load()
on updating program memory.
Reported-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> Cc: <stable@vger.kernel.org>
Chuansheng Liu [Tue, 7 Jan 2014 08:53:34 +0000 (16:53 +0800)]
xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to
call destroy_work_on_stack() which frees the debug object to pair
with INIT_WORK_ONSTACK().
Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 6f96b3063cdd473c68664a190524ed966ac0cd92)
Jie Liu [Wed, 1 Jan 2014 11:28:03 +0000 (19:28 +0800)]
xfs: fix off-by-one error in xfs_attr3_rmt_verify
With CRC check is enabled, if trying to set an attributes value just
equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote
attr write verification procedure failure, which would yield the back
trace like below:
This patch fix it to check the remote EA size is greater than the
XATTR_SIZE_MAX rather than more than or equal to it, because it's
valid if the specified EA value size is equal to the limitation as
per VFS setxattr interface.
Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 85dd0707f0cad26d60f2dc574d17a5ab948d10f7)
Shahed Shaikh [Thu, 9 Jan 2014 17:41:05 +0000 (12:41 -0500)]
qlcnic: Fix ethtool statistics length calculation
o Consider number of Tx queues while calculating the length of
Tx statistics as part of ethtool stats.
o Calculate statistics lenght properly for 82xx and 83xx adapter
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 10 Jan 2014 08:18:26 +0000 (16:18 +0800)]
net: core: explicitly select a txq before doing l2 forwarding
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The
will cause several issues:
- NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan
instead of lower device which misses the necessary txq synchronization for
lower device such as txq stopping or frozen required by dev watchdog or
control path.
- dev_hard_start_xmit() was called with NULL txq which bypasses the net device
watchdog.
- dev_hard_start_xmit() does not check txq everywhere which will lead a crash
when tso is disabled for lower device.
Fix this by explicitly introducing a new param for .ndo_select_queue() for just
selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also
extended to accept this parameter and dev_queue_xmit_accel() was used to do l2
forwarding transmission.
With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need
to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep
a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of
dev_queue_xmit() to do the transmission.
In the future, it was also required for macvtap l2 forwarding support since it
provides a necessary synchronization method.
Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 10 Jan 2014 08:18:25 +0000 (16:18 +0800)]
macvlan: forbid L2 fowarding offload for macvtap
L2 fowarding offload will bypass the rx handler of real device. This will make
the packet could not be forwarded to macvtap device. Another problem is the
dev_hard_start_xmit() called for macvtap does not have any synchronization.
Fix this by forbidding L2 forwarding for macvtap.
Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 10 Jan 2014 18:21:22 +0000 (13:21 -0500)]
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
For the mac80211 bits, Johannes says:
"I have a fix from Javier for mac80211_hwsim when used with wmediumd
userspace, and a fix from Felix for buffering in AP mode."
For the NFC bits, Samuel says:
"This pull request only contains one fix for a regression introduced with
commit e29a9e2ae165620d. Without this fix, we can not establish a p2p link
in target mode. Only initiator mode works."
For the iwlwifi bits, Emmanuel says:
"It only includes new device IDs so it's not vital. If you have a pull
request to net.git anyway, I'd happy to have this in."
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Thu, 9 Jan 2014 13:36:27 +0000 (14:36 +0100)]
bnx2x: fix DMA unmapping of TSO split BDs
bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y:
WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920()
bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with
different size [device address=0x00000000da2b389e] [map size=1490 bytes]
[unmap size=66 bytes]
The reason is that bnx2x splits a TSO BD into two BDs (headers + data)
using one DMA mapping for both, but it uses only the length of the first
BD when unmapping.
This patch fixes the bug by unmapping the whole length of the two BDs.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 10 Jan 2014 08:57:23 +0000 (15:57 +0700)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clock fixes from Mike Turquette:
"Late fixes for clock drivers. All of these fixes are for user-visible
regressions, typically boot failures or other unsafe system
configuration that causes badness"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
clk: clk-divider: fix divisor > 255 bug
clk: exynos: File scope reg_save array should depend on PM_SLEEP
clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock
ARM: dts: exynos5250: Fix MDMA0 clock number
clk: samsung: exynos5250: Add MDMA0 clocks
clk: samsung: exynos5250: Fix ACP gate register offset
clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks
clk: samsung: exynos4: Correct SRC_MFC register
Linus Torvalds [Fri, 10 Jan 2014 08:54:49 +0000 (15:54 +0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes for Renesas platforms to fixup DMA masks (this started
causing errors once the DMA API added checks for valid masks in 3.13)"
ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME
In the past the IFA_PERMANENT flag indicated, that the valid and preferred
lifetime where ignored. Since change fad8da3e085ddf ("ipv6 addrconf: fix
preferred lifetime state-changing behavior while valid_lft is infinity")
we honour at least the preferred lifetime on those addresses. As such
the valid lifetime gets recalculated and updated to 0.
If loopback address is added manually this problem does not occur.
Also if NetworkManager manages IPv6, those addresses will get added via
inet6_rtm_newaddr and thus will have a correct lifetime, too.
Reported-by: François-Xavier Le Bail <fx.lebail@yahoo.com> Reported-by: Damien Wyart <damien.wyart@gmail.com> Fixes: fad8da3e085ddf ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity") Cc: Yasushi Asano <yasushi.asano@jp.fujitsu.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Tue, 7 Jan 2014 10:07:41 +0000 (12:07 +0200)]
bnx2x: prevent WARN during driver unload
Starting with commit 80c33dd "net: add might_sleep() call to napi_disable"
bnx2x fails the might_sleep tests causing a stack trace to appear whenever
the driver is unloaded, as local_bh_disable() is being called before
napi_disable().
This changes the locking schematics related to CONFIG_NET_RX_BUSY_POLL,
preventing the need for calling local_bh_disable() and thus eliminating
the issue.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiang Liu [Thu, 9 Jan 2014 07:30:27 +0000 (15:30 +0800)]
intel_idle: close avn_cstates array with correct marker
Close avn_cstates array with correct marker to avoid overflow
in function intel_idle_cpu_init().
[rjw: The problem was introduced when commit 22e580d07f65 was merged
on top of eba682a5aeb6 (intel_idle: shrink states tables).]
Fixes: 22e580d07f65 (intel_idle: Fixed C6 state on Avoton/Rangeley processors) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 9d046ccb98085 marks all state tables with __initdata, but
the state table may be accessed when doing CPU online, which then
causing system crash as below:
Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Thu, 9 Jan 2014 01:08:23 +0000 (09:08 +0800)]
Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Late fixes for libata. Nothing too interesting. Adding missing PM
callbacks to satat_sis and an additional PCI ID for ahci"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata_sis: missing PM support
ahci: add PCI ID for Marvell 88SE9170 SATA controller
parisc: Ensure full cache coherency for kmap/kunmap
Helge Deller noted a few weeks ago problems with the AIO support on
parisc. This change is the result of numerous iterations on how best to
deal with this problem.
The solution adopted here is to provide full cache coherency in a
uniform manner on all parisc systems. This involves calling
flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on
kunmap operations. As a result, the copy_user_page() and
clear_user_page() functions can be removed and the overall code is
simpler.
The change ensures that both userspace and kernel aliases to a mapped
page are invalidated and flushed. This is necessary for the correct
operation of PA8800 and PA8900 based systems which do not support
inequivalent aliases.
With this change, I have observed no cache related issues on c8000 and
rp3440. It is now possible for example to do kernel builds with "-j64"
on four way systems.
On systems using XFS file systems, the patch recently posted by Mikulas
Patocka to "fix crash using XFS on loopback" is needed to avoid a hang
caused by an uninitialized lock passed to flush_dcache_page() in the
page struct.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
Merge tag 'nfc-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes
Samuel Ortiz <sameo@linux.intel.com> says:
"This is the first NFC fixes pull request for 3.13.
It only contains one fix for a regression introduced with commit e29a9e2ae165620d. Without this fix, we can not establish a p2p link in
target mode. Only initiator mode works."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
James Hogan [Mon, 16 Dec 2013 10:41:38 +0000 (10:41 +0000)]
clk: clk-divider: fix divisor > 255 bug
Commit 6d9252bd9a4bb (clk: Add support for power of two type dividers)
merged in v3.6 added the _get_val function to convert a divisor value to
a register field value depending on the flags. However it used the type
u8 for the div field, causing divisors larger than 255 to be masked
and the resultant clock rate to be too high.
E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down
to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This
was masked to 238 (0xee) resulting in a frequency of 103.26KHz.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
The driver defines ADAU1701_SEROCTL_WORD_LEN_16 as 0x10 while it should be b10,
so 0x2. This patch fixes it.
Reported-by: Magnus Reftel <magnus.reftel@lockless.no> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
Dave Airlie [Wed, 8 Jan 2014 07:55:44 +0000 (17:55 +1000)]
Merge tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Just a revert (gen4 backlight seems a lost cause) and a tlb coherency fix
for bdw, plus the patch to sign up Jani for co-maintainer. Thanks to Ben
for taking care of -fixes while I've enjoyed a bit of vacation.
* tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel:
MAINTAINERS: Updates for drm/i915
Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"
drm/i915/bdw: Flush system agent on gen8 also
Ilia Mirkin [Tue, 7 Jan 2014 17:33:59 +0000 (12:33 -0500)]
drm/nouveau/bios: fix offset calculation for BMPv1 bioses
The only BIOS on record that needs the 14 offset has a bios major
version 2 but BMP version 1.01. Another bunch of BIOSes that need the 18
offset have BMP version 2.01 or 5.01 or higher. So instead of looking at the
bios major version, look at the BMP version. BIOSes with BMP version 0
do not contain a detectable script, so always return 0 for them.
See https://bugs.freedesktop.org/show_bug.cgi?id=68835
Reported-by: Mauro Molinari <mauromol@tiscali.it> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
David S. Miller [Tue, 7 Jan 2014 23:38:03 +0000 (18:38 -0500)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
The following patchset contains two patches:
* fix the IRC NAT helper which was broken when adding (incomplete) IPv6
support, from Daniel Borkmann.
* Refine the previous bugtrap that Jesper added to catch problems for the
usage of the sequence adjustment extension in IPVs in Dec 16th, it may
spam messages in case of finding a real bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Erik Hugne [Tue, 7 Jan 2014 20:51:36 +0000 (15:51 -0500)]
tipc: correctly unlink packets from deferred packet queue
When we pull a received packet from a link's 'deferred packets' queue
for processing, its 'next' pointer is not cleared, and still refers to
the next packet in that queue, if any. This is incorrect, but caused
no harm before commit 40ba3cdf542a469aaa9083fa041656e59b109b90 ("tipc:
message reassembly using fragment chain") was introduced. After that
commit, it may sometimes lead to the following oops:
This happens when the last fragment of a message has passed through the
the receiving link's 'deferred packets' queue, and at least one other
packet was added to that queue while it was there. After the fragment
chain with the complete message has been successfully delivered to the
receiving socket, it is released. Since 'next' pointer of the last
fragment in the released chain now is non-NULL, we get the crash shown
above.
We fix this by clearing the 'next' pointer of all received packets,
including those being pulled from the 'deferred' queue, before they
undergo any further processing.
Fixes: 40ba3cdf542a4 ("tipc: message reassembly using fragment chain") Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Before 469bdcefdc ("ipv6: fix the use of pcpu_tstats in ip6_vti.c"),
the pcpu_tstats.syncp is not used to pretect the 64bit elements of
pcpu_tstats, so not appear this calltrace.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Vetter [Tue, 7 Jan 2014 08:24:31 +0000 (09:24 +0100)]
MAINTAINERS: Updates for drm/i915
Jani for co-maintainer!
Jani has been a really active bug-scrubber in the past few months.
I've asked him whether he wants to do this in a more official capacity
and he agreed. I've already chatted with Dave and Jesse and they
support this.
Note that everyone can't now just relax because "Jani will do all the
bug scrubbing" - au contraire expect more nagging and poking now that
we have more bandwidth.
Longer-term the plan is to share more of the maintainer duties, but we
need to fix up the infrastructure a bit first (like moving the git
repo to a common location).
While at it also add the newly set-up patchwork instance.
Cc: Dave Airlie <airlied@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ilia Mirkin [Mon, 6 Jan 2014 01:07:02 +0000 (20:07 -0500)]
drm/nouveau/bios: make jump conditional
This fixes a hang in VBIOS scripts of the form "condition; jump".
The jump used to always be executed, while now it will only be
executed if the condition is true.
See https://bugs.freedesktop.org/show_bug.cgi?id=72943
Reported-by: Darcy Brás da Silva <dardevelin@cidadecool.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org
Pull networking fixes from David Miller:
"I'm hoping this is the very last batch of networking fixes for 3.13,
here goes nothing:
1) Fix crashes in VLAN's header_ops passthru.
2) Bridge multicast code needs to use BH spinlocks to prevent
deadlocks with timers. From Curt Brune.
3) ipv6 tunnels lack proper synchornization when updating percpu
statistics. From Li RongQing.
4) Fixes to bnx2x driver from Yaniv Rosner, Dmitry Kravkov and Michal
Kalderon.
5) Avoid undefined operator evaluation order in llc code, from Daniel
Borkmann.
6) Error paths in various GSO offload paths do not unwind properly,
in particular they must undo any modifications they have made to
the SKB. From Wei-Chun Chao.
7) Fix RX refill races during restore in virtio-net, from Jason Wang.
8) Fix SKB use after free in LLC code, from Daniel Borkmann.
9) Missing unlock and OOPS in netpoll code when VLAN tag handling
fails.
10) Fix vxlan device attachment wrt ipv6, from Fan Du.
11) Don't allow creating infiniband links to non-infiniband devices,
from Hangbin Liu.
12) Revert FEC phy reset active low change, it breaks things. From
Fabio Estevam.
13) Fix header pointer handling in 6lowpan header building code, from
Daniel Borkmann.
14) Fix RSS handling in be2net driver, from Vasundhara Volam.
15) Fix modem port indexing in HSO driver, from Dan Williams"
* http://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
bridge: use spin_lock_bh() in br_multicast_set_hash_max
ipv6: don't install anycast address for /128 addresses on routers
hso: fix handling of modem port SERIAL_STATE notifications
isdn: Drop big endian cpp checks from telespci and hfc_pci drivers
be2net: fix max_evt_qs calculation for BE3 in SR-IOV config
be2net: increase the timeout value for loopback-test FW cmd
be2net: disable RSS when number of RXQs is reduced to 1 via set-channels
xen-netback: Include header for vmalloc
net: 6lowpan: fix lowpan_header_create non-compression memcpy call
fec: Revert "fec: Do not assume that PHY reset is active low"
bnx2x: fix VLAN configuration for VFs.
bnx2x: fix AFEX memory overflow
bnx2x: Clean before update RSS arrives
bnx2x: Correct number of MSI-X vectors for VFs
bnx2x: limit number of interrupt vectors for 57711
qlcnic: Fix bug in Tx completion path
infiniband: make sure the src net is infiniband when create new link
{vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly
cxgb4: allow large buffer size to have page size
netpoll: Fix missing TXQ unlock and and OOPS.
...
Curt Brune [Mon, 6 Jan 2014 19:00:32 +0000 (11:00 -0800)]
bridge: use spin_lock_bh() in br_multicast_set_hash_max
br_multicast_set_hash_max() is called from process context in
net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function.
br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock),
which can deadlock the CPU if a softirq that also tries to take the
same lock interrupts br_multicast_set_hash_max() while the lock is
held . This can happen quite easily when any of the bridge multicast
timers expire, which try to take the same lock.
The fix here is to use spin_lock_bh(), preventing other softirqs from
executing on this CPU.
Steps to reproduce:
1. Create a bridge with several interfaces (I used 4).
2. Set the "multicast query interval" to a low number, like 2.
3. Enable the bridge as a multicast querier.
4. Repeatedly set the bridge hash_max parameter via sysfs.
# while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done
Signed-off-by: Curt Brune <curt@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: don't install anycast address for /128 addresses on routers
It does not make sense to create an anycast address for an /128-prefix.
Suppress it.
As 32019e651c6fce ("ipv6: Do not leave router anycast address for /127
prefixes.") shows we also may not leave them, because we could accidentally
remove an anycast address the user has allocated or got added via another
prefix.
Cc: François-Xavier Le Bail <fx.lebail@yahoo.com> Cc: Thomas Haller <thaller@redhat.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Mon, 6 Jan 2014 16:07:29 +0000 (10:07 -0600)]
hso: fix handling of modem port SERIAL_STATE notifications
The existing serial state notification handling expected older Option
devices, having a hardcoded assumption that the Modem port was always
USB interface #2. That isn't true for devices from the past few years.
hso_serial_state_notification is a local cache of a USB Communications
Interface Class SERIAL_STATE notification from the device, and the
USB CDC specification (section 6.3, table 67 "Class-Specific Notifications")
defines wIndex as the USB interface the event applies to. For hso
devices this will always be the Modem port, as the Modem port is the
only port which is set up to receive them by the driver.
So instead of always expecting USB interface #2, instead validate the
notification with the actual USB interface number of the Modem port.
Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk Brandewie [Mon, 6 Jan 2014 18:59:16 +0000 (10:59 -0800)]
intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
KVM environments do not support APERF/MPERF MSRs. intel_pstate cannot
operate without these registers.
The previous validity checks in intel_pstate_msrs_not_valid() are
insufficent in nested KVMs.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1046317 Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Eric Whitney [Mon, 6 Jan 2014 19:00:23 +0000 (14:00 -0500)]
ext4: fix bigalloc regression
Commit f5a44db5d2 introduced a regression on filesystems created with
the bigalloc feature (cluster size > blocksize). It causes xfstests
generic/006 and /013 to fail with an unexpected JBD2 failure and
transaction abort that leaves the test file system in a read only state.
Other xfstests run on bigalloc file systems are likely to fail as well.
The cause is the accidental use of a cluster mask where a cluster
offset was needed in ext4_ext_map_blocks().
Suresh Reddy [Mon, 6 Jan 2014 07:32:25 +0000 (13:02 +0530)]
be2net: fix max_evt_qs calculation for BE3 in SR-IOV config
The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF.
When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs.
Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Suresh Reddy [Mon, 6 Jan 2014 07:32:24 +0000 (13:02 +0530)]
be2net: increase the timeout value for loopback-test FW cmd
The loopback test FW cmd may need upto 15 seconds to complete on
certain PHYs. This patch also fixes the name of the completion variable
used to synchronize FW cmd completions as it not used by the flashing
cmd alone anymore.
Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: disable RSS when number of RXQs is reduced to 1 via set-channels
When *only* the default RXQ is used, the RSS policy must be disabled so
that all IP and no-IP traffic is placed into the default RXQ. If not,
IP traffic is dropped.
Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for
the interface. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ASoC: dpcm: Allow PCMs to omit the set of supported formats
Allow PCMs that do not impose any restrictions on the supported formats to set
the formats field to 0, Instead of assuming that this means that the PCM does
not support any formats (which doesn't make much sense), assume that it supports
all formats. This brings the behavior of DPCM closer to that of non-DPCM.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
Daniel Borkmann [Tue, 31 Dec 2013 15:28:39 +0000 (16:28 +0100)]
netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper
Commit 5901b6be885e attempted to introduce IPv6 support into
IRC NAT helper. By doing so, the following code seemed to be removed
by accident:
ip = ntohl(exp->master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip);
sprintf(buffer, "%u %u", ip, port);
pr_debug("nf_nat_irc: inserting '%s' == %pI4, port %u\n", buffer, &ip, port);
This leads to the fact that buffer[] was left uninitialized and
contained some stack value. When we call nf_nat_mangle_tcp_packet(),
we call strlen(buffer) on excatly this uninitialized buffer. If we
are unlucky and the skb has enough tailroom, we overwrite resp. leak
contents with values that sit on our stack into the packet and send
that out to the receiver.
Since the rather informal DCC spec [1] does not seem to specify
IPv6 support right now, we log such occurences so that admins can
act accordingly, and drop the packet. I've looked into XChat source,
and IPv6 is not supported there: addresses are in u32 and print
via %u format string.
Therefore, restore old behaviour as in IPv4, use snprintf(). The
IRC helper does not support IPv6 by now. By this, we can safely use
strlen(buffer) in nf_nat_mangle_tcp_packet() and prevent a buffer
overflow. Also simplify some code as we now have ct variable anyway.
Fixes: 5901b6be885e ("netfilter: nf_nat: support IPv6 in IRC NAT helper") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Reported-by: Dylan Borg <borgdylan@hotmail.com> (for a Acer Extensa 5635Z) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mike Turquette [Mon, 6 Jan 2014 05:36:43 +0000 (21:36 -0800)]
Merge tag 'samsung-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-fixes
Samsung Clock fixes for 3.13-rc7
* Several patches fixing up incorrectly defined register addresses and
bitfield offsets that could lead to undefined operation when accessing
respective registers or bitfields.
All three issues have been present since Exynos5250 and Exynos4 clock
drivers were added by commits 6e3ad26816b72 ("clk: exynos5250:
register clocks using common clock framework") and e062b571777f5
("clk: exynos4: register clocks using common clock framework")
respectively.
* Patch to fix automatic disabling of Exynos5250 sysreg clock that could
cause undefined operation of several peripherals, such as USB, I2C,
MIPI or display block.
4) clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg
clock
Present since Exynos5250 clock drivers was added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock
framework").
* Patch fixing compilation warning in clk-exynos-audss driver when
CONFIG_PM_SLEEP is disabled.
5) clk: exynos: File scope reg_save array should depend on PM_SLEEP
Present since the driver was added by commit 1241ef94ccc3 ("clk:
samsung: register audio subsystem clocks using common clock
framework").
Josh Boyer [Sun, 5 Jan 2014 15:24:01 +0000 (10:24 -0500)]
xen-netback: Include header for vmalloc
Commit ac3d5ac27735 ("xen-netback: fix guest-receive-side array sizes")
added calls to vmalloc and vfree in the interface.c file without including
<linux/vmalloc.h>. This causes build failures if the
-Werror=implicit-function-declaration flag is passed.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Where the else path of the condition, that is, non-compression
path, calls memcpy() with a pointer to struct ipv6hdr *hdr as
source, thus two levels of indirection. This cannot be correct,
and likely only one level of pointer was intended as source
buffer for memcpy() here.
Fixes: 44331fe2aa0d ("IEEE802.15.4: 6LoWPAN basic support") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Sun, 5 Jan 2014 16:33:54 +0000 (18:33 +0200)]
bnx2x: fix VLAN configuration for VFs.
If the hypervisor configures a vlan for the VF via the PF, the expected
result is that only packets tagged by said vlan will be received by the VF
(and that vlan will be silently removed).
Due to an incorrect manipulation of vlan filters in the driver, the
VF can receive untagged traffic even if the hypervisor configured
some vlan for it.
This patch corrects the behaviour.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Sun, 5 Jan 2014 16:33:53 +0000 (18:33 +0200)]
bnx2x: fix AFEX memory overflow
There are 2 different (related) flows in the slowpath configuration
that utilize the same pointer and cast it to different structs;
This is obviously incorrect as the intended allocated memory is that
of the smaller struct, possibly causing the flow utilizing the larger
struct to corrupt other slowpath configuration.
Since both flows are exclusive, set the allocated memory to be a union
of both structs.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 5 Jan 2014 16:33:52 +0000 (18:33 +0200)]
bnx2x: Clean before update RSS arrives
When a PF receives a VF message indicating a change in RSS properties
it should clean the flags' bit-fields; Otherwise, it's possible that
some random values will be considered as flags by the lower layers configuring
the RSS in FW.
Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 5 Jan 2014 16:33:51 +0000 (18:33 +0200)]
bnx2x: Correct number of MSI-X vectors for VFs
Number of VFs in PCIe configuration space is zero-based. Driver incorrectly
sets the number of VFs to be larger by one than what actually is feasible by
HW, which might cause later VFs to fail to allocate their MSI-X interrupts.
Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Sun, 5 Jan 2014 16:33:50 +0000 (18:33 +0200)]
bnx2x: limit number of interrupt vectors for 57711
Original straightforward division may lead to zeroing number of SB and
null-pointer dereference when device is short of MSIX vectors or lacks
MSIX capabilities.
Reported-by: Vladislav Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 6 Jan 2014 01:20:45 +0000 (12:20 +1100)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Another set of small fixes for ARM, covering various areas.
Laura fixed a long standing issue with virt_addr_valid() failing to
handle holes in memory. Steve found a problem with dcache flushing
for compound pages. I fixed another bug in footbridge stuff causing
time to tick slowly, and also a problem with the AES code which can
cause linker errors.
A patch from Rob which fixes Xen problems induced by a lack of
consistency in our naming of ioremap_cache() - which thankfully has
very few users"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 7933/1: rename ioremap_cached to ioremap_cache
ARM: fix "bad mode in ... handler" message for undefined instructions
CRYPTO: Fix more AES build errors
ARM: 7931/1: Correct virt_addr_valid
ARM: 7923/1: mm: fix dcache flush logic for compound high pages
ARM: fix footbridge clockevent device
Jiang Liu [Thu, 19 Dec 2013 12:38:15 +0000 (20:38 +0800)]
ACPI / TPM: fix memory leak when walking ACPI namespace
In function ppi_callback(), memory allocated by acpi_get_name() will get
leaked when current device isn't the desired TPM device, so fix the
memory leak.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Alexander Mezin [Sat, 4 Jan 2014 02:07:59 +0000 (09:07 +0700)]
ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY
With kernel 3.13rc5 there are no AC adapter notifications on my laptop.
Commit cc8ef5270734 "ACPI / AC: convert ACPI ac driver to platform bus"
changed the driver to listen to device notifications only. However, AML
code on my laptop notifies the driver with zero event.
This patch changes the driver to listen to all events again.
Fixes: cc8ef5270734 (ACPI / AC: convert ACPI ac driver to platform bus)
References: https://bugzilla.kernel.org/show_bug.cgi?id=67821 Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rob Herring [Fri, 3 Jan 2014 15:17:44 +0000 (16:17 +0100)]
ARM: 7933/1: rename ioremap_cached to ioremap_cache
ioremap_cache is more aligned with other architectures.
There are only 2 users of this in the kernel: pxa2xx-flash and Xen.
This fixes Xen build failures on arm64:
drivers/tty/hvc/hvc_xen.c:233:2: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration]
drivers/xen/grant-table.c:1174:3: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration]
drivers/xen/xenbus/xenbus_probe.c:778:4: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration]
Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 2 Jan 2014 17:14:45 +0000 (17:14 +0000)]
CRYPTO: Fix more AES build errors
Building a multi-arch kernel results in:
arch/arm/crypto/built-in.o: In function `aesbs_xts_decrypt':
sha1_glue.c:(.text+0x15c8): undefined reference to `bsaes_xts_decrypt'
arch/arm/crypto/built-in.o: In function `aesbs_xts_encrypt':
sha1_glue.c:(.text+0x1664): undefined reference to `bsaes_xts_encrypt'
arch/arm/crypto/built-in.o: In function `aesbs_ctr_encrypt':
sha1_glue.c:(.text+0x184c): undefined reference to `bsaes_ctr32_encrypt_blocks'
arch/arm/crypto/built-in.o: In function `aesbs_cbc_decrypt':
sha1_glue.c:(.text+0x19b4): undefined reference to `bsaes_cbc_encrypt'
This code is already runtime-conditional on NEON being supported, so
there's no point compiling it out depending on the minimum build
architecture.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1) Missing include can lead to build failure, from Kirill Tkhai.
2) Use dev_is_pci() where applicable, from Yijing Wang.
3) Enable irqs after we enable preemption in cpu startup path, from
Kirill Tkhai.
4) Revert a __copy_{to,from}_user_inatomic change that broke
iov_iter_copy_from_user_atomic() and thus several tests in xfstests
and LTP. From Dave Kleikamp.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
Revert "sparc64: Fix __copy_{to,from}_user_inatomic defines."
sparc64: smp_callin: Enable irqs after preemption is disabled
sparc/PCI: Use dev_is_pci() to identify PCI devices
sparc64: Fix build regression
This commit broke the behavior of __copy_from_user_inatomic when
it is only partially successful. Instead of returning the number
of bytes not copied, it now returns 1. This translates to the
wrong value being returned by iov_iter_copy_from_user_atomic.
xfstests generic/246 and LTP writev01 both fail on btrfs and nfs
because of this.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Yijing Wang [Wed, 11 Dec 2013 06:00:26 +0000 (14:00 +0800)]
sparc/PCI: Use dev_is_pci() to identify PCI devices
Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arron Wang [Thu, 14 Nov 2013 09:03:41 +0000 (17:03 +0800)]
NFC: Fix target mode p2p link establishment
With commit e29a9e2ae165620d, we set the active_target pointer from
nfc_dep_link_is_up() in order to support the case where the target
detection and the DEP link setting are done atomically by the driver.
That can only happen in initiator mode, so we need to check for that
otherwise we fail to bring a p2p link in target mode.
Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Shahed Shaikh [Fri, 3 Jan 2014 06:34:28 +0000 (01:34 -0500)]
qlcnic: Fix bug in Tx completion path
o Driver is using common tx_clean_lock for all Tx queues. This patch
adds per queue tx_clean_lock.
o Driver is not updating sw_consumer while processing Tx completion
when interface is going down. Fixed in this patch.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 3 Jan 2014 03:33:45 +0000 (11:33 +0800)]
infiniband: make sure the src net is infiniband when create new link
When we create a new infiniband link with uninfiniband device, e.g. `ip link
add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference
cause other dev like Ethernet don't have struct ib_device.
The code path is:
rtnl_newlink
|-- ipoib_new_child_link
|-- __ipoib_vlan_add
|-- ipoib_set_dev_features
|-- ib_query_device
Fix this bug by make sure the src net is infiniband when create new link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
fan.du [Fri, 3 Jan 2014 02:18:58 +0000 (10:18 +0800)]
{vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly
Even if user doesn't supply the physical netdev to attach vxlan dev
to, and at the same time user want to vxlan sit top of IPv6, mark
vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket.
Otherwise kernel crashes safely every time spitting below messages,
Steps to reproduce:
ip link add vxlan0 type vxlan id 42 group ff0e::110
ip link set vxlan0 up
Signed-off-by: Fan Du <fan.du@windriver.com> Reported-by: Ryan Whelan <rcwhelan@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 52367a763d8046190754ab43743e42638564a2d1
("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"),
we have failures like this during cxgb4 probe:
cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536]
cxgb4: probe of 0000:01:00.4 failed with error -22
This happens whenever software parameters are used, without a
configuration file. That happens when the hardware was already
initialized (after kexec, or after csiostor is loaded).
It happens that these values are acceptable, rendering fl_pg_order equal
to 0, which is the case of a hard init when the page size is equal or
larger than 65536.
Accepting fl_large_pg equal to fl_small_pg solves the issue, and
shouldn't cause any trouble besides a possible performance reduction
when smaller pages are used. And that can be fixed by a configuration
file.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 3 Jan 2014 21:48:25 +0000 (13:48 -0800)]
Merge tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6
Pull battery fixes from Anton Vorontsov:
"Two fixes:
- fix build error caused by max17042_battery conversion to the regmap
API.
- fix kernel oops when booting with wakeup_source_activate enabled"
* tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6:
max17042_battery: Fix build errors caused by missing REGMAP_I2C config
power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate
Linus Torvalds [Fri, 3 Jan 2014 21:44:41 +0000 (13:44 -0800)]
Merge tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PM fixes and new device IDs from Rafael Wysocki:
"These commits, except for one, are regression fixes and the remaining
one fixes a divide error leading to a kernel panic. The majority of
the regressions fixed here were introduced during the 3.12 cycle, one
of them is from this cycle and one is older.
Specifics:
- VGA switcheroo was broken for some users as a result of the
ACPI-based PCI hotplug (ACPIPHP) changes in 3.12, because some
previously ignored hotplug events started to be handled. The fix
causes them to be ignored again.
- There are two more issues related to cpufreq's suspend/resume
handling changes from the 3.12 cycle addressed by Viresh Kumar's
fixes.
- intel_pstate triggers a divide error in a timer function if the
P-state information it needs is missing during initialization.
This leads to kernel panics on nested KVM clients and is fixed by
failing the initialization cleanly in those cases.
- PCI initalization code changes during the 3.9 cycle uncovered BIOS
issues related to ACPI wakeup notifications (some BIOSes send them
for devices that aren't supposed to support ACPI wakeup). Work
around them by installing an ACPI wakeup notify handler for all PCI
devices with ACPI support.
- The Calxeda cpuilde driver's probe function is tagged as __init,
which is incorrect and causes a section mismatch to occur during
build. Fix from Andre Przywara removes the __init tag from there.
- During the 3.12 cycle ACPIPHP started to print warnings about
missing _ADR for devices that legitimately don't have it. Fix from
Toshi Kani makes it only print the warnings where they make sense"
* tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
intel_pstate: Fail initialization if P-state information is missing
ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function
PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI
cpufreq: preserve user_policy across suspend/resume
cpufreq: Clean up after a failing light-weight initialization
ACPI / PCI / hotplug: Avoid warning when _ADR not present
projects / karo-tx-linux.git / log