]> git.karo-electronics.de Git - linux-beck.git/log
linux-beck.git
13 years ago[S390] MAINTAINERS: Update zcrypt driver entry
Holger Dengler [Wed, 12 Jan 2011 08:55:32 +0000 (09:55 +0100)]
[S390] MAINTAINERS: Update zcrypt driver entry

Holger will take over the zcrypt driver maintainer work. Update the
MAINTAINERS entry accordingly.

Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
13 years ago[S390] Randomize PIEs
Heiko Carstens [Wed, 12 Jan 2011 08:55:31 +0000 (09:55 +0100)]
[S390] Randomize PIEs

Randomize ELF_ET_DYN_BASE, which is used when loading position
independent executables.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] Randomise the brk region
Heiko Carstens [Wed, 12 Jan 2011 08:55:30 +0000 (09:55 +0100)]
[S390] Randomise the brk region

Randomize heap address like other architectures do already.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] Add is_32bit_task() helper function
Heiko Carstens [Wed, 12 Jan 2011 08:55:29 +0000 (09:55 +0100)]
[S390] Add is_32bit_task() helper function

Helper function which tells us if a task is running in ESA mode.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] Randomize lower bits of stack address
Heiko Carstens [Wed, 12 Jan 2011 08:55:28 +0000 (09:55 +0100)]
[S390] Randomize lower bits of stack address

Randomize the lower bits of the stack address like x86 and powerpc.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] Randomize mmap start address
Heiko Carstens [Wed, 12 Jan 2011 08:55:27 +0000 (09:55 +0100)]
[S390] Randomize mmap start address

Randomize mmap start address with 8MB.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] Rearrange mmap.c
Heiko Carstens [Wed, 12 Jan 2011 08:55:26 +0000 (09:55 +0100)]
[S390] Rearrange mmap.c

Shuffle code around so it looks more like x86 and powerpc.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] Enable flexible mmap layout for 64 bit processes
Heiko Carstens [Wed, 12 Jan 2011 08:55:25 +0000 (09:55 +0100)]
[S390] Enable flexible mmap layout for 64 bit processes

Historically 64 bit processes use the legacy address layout. However
there is no reason why 64 bit processes shouldn't benefit from the
flexible mmap layout advantages.
Therefore just enable it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] vdso: dont map at mmap_base
Heiko Carstens [Wed, 12 Jan 2011 08:55:24 +0000 (09:55 +0100)]
[S390] vdso: dont map at mmap_base

The vdso object is currently always mapped with mm->mmap_base used as
requested address. In case of flexible mmap layout this means it gets
mapped above mmap_base and therefore potentially stealing a bit of
address space that is reserved for the stack.
In case of flexible mmap layout the object should be mapped below
mmap base. For legacy mmap layout above.
To fix this just don't request any specific address and let the mmap
code figure out an address that fits.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] reduce miminum gap between stack and mmap_base
Heiko Carstens [Wed, 12 Jan 2011 08:55:23 +0000 (09:55 +0100)]
[S390] reduce miminum gap between stack and mmap_base

Reduce minimum gap between stack and mmap_base to 32MB. That way there
is a bit more space for heap and mmap for tight 31 bit address spaces.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] mmap: consider stack address randomization
Heiko Carstens [Wed, 12 Jan 2011 08:55:22 +0000 (09:55 +0100)]
[S390] mmap: consider stack address randomization

Consider stack address randomization when calulating mmap_base for
flexible mmap layout . Because of address randomization the stack
address can be up to 8MB lower than STACK_TOP.
When calculating mmap_base this isn't taken into account, which could
lead to the case that the gap between the real stack top and mmap_base
is lower than what ulimit specifies for the maximum stack size.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] Update default configuration
Martin Schwidefsky [Wed, 12 Jan 2011 08:55:21 +0000 (09:55 +0100)]
[S390] Update default configuration

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years ago[S390] cio: path_event overindication after resume
Sebastian Ott [Wed, 12 Jan 2011 08:55:10 +0000 (09:55 +0100)]
[S390] cio: path_event overindication after resume

While resuming report any found paths as new to the
device drivers.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 12 Jan 2011 00:32:41 +0000 (16:32 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits)
  cxgb4vf: recover from failure in cxgb4vf_open()
  netfilter: ebtables: make broute table work again
  netfilter: fix race in conntrack between dump_table and destroy
  ah: reload pointers to skb data after calling skb_cow_data()
  ah: update maximum truncated ICV length
  xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC
  ehea: Increase the skb array usage
  net/fec: remove config FEC2 as it's used nowhere
  pcnet_cs: add new_id
  tcp: disallow bind() to reuse addr/port
  net/r8169: Update the function of parsing firmware
  net: ppp: use {get,put}_unaligned_be{16,32}
  CAIF: Fix IPv6 support in receive path for GPRS/3G
  arp: allow to invalidate specific ARP entries
  net_sched: factorize qdisc stats handling
  mlx4: Call alloc_etherdev to allocate RX and TX queues
  net: Add alloc_netdev_mqs function
  caif: don't set connection request param size before copying data
  cxgb4vf: fix mailbox data/control coherency domain race
  qlcnic: change module parameter permissions
  ...

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 12 Jan 2011 00:32:20 +0000 (16:32 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix bootup regression due to perf init ordering.

13 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Wed, 12 Jan 2011 00:31:41 +0000 (16:31 -0800)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (72 commits)
  powerpc/pseries: Fix build of topology stuff without CONFIG_NUMA
  powerpc/pseries: Fix VPHN build errors on non-SMP systems
  powerpc/83xx: add mpc8308_p1m DMA controller device-tree node
  powerpc/83xx: add DMA controller to mpc8308 device-tree node
  powerpc/512x: try to free dma descriptors in case of allocation failure
  powerpc/512x: add MPC8308 dma support
  powerpc/512x: fix the hanged dma transfer issue
  powerpc/512x: scatter/gather dma fix
  powerpc/powermac: Make auto-loading of therm_pm72 possible
  of/address: Use propper endianess in get_flags
  powerpc/pci: Use printf extension %pR for struct resource
  powerpc: Remove unnecessary casts of void ptr
  powerpc: Disable VPHN polling during a suspend operation
  powerpc/pseries: Poll VPA for topology changes and update NUMA maps
  powerpc: iommu: Add device name to iommu error printks
  powerpc: Record vma->phys_addr in ioremap()
  powerpc: Update compat_arch_ptrace
  powerpc: Fix PPC_PTRACE_SETHWDEBUG on PPC_BOOK3S
  powerpc/time: printk time stamp init not correct
  powerpc: Minor cleanups for machdep.h
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Wed, 12 Jan 2011 00:30:08 +0000 (16:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits)
  IB/qib: Fix refcount leak in lkey/rkey validation
  IB/qib: Improve SERDES tunning on QMH boards
  IB/qib: Unnecessary delayed completions on RC connection
  IB/qib: Issue pre-emptive NAKs on eager buffer overflow
  IB/qib: RDMA lkey/rkey validation is inefficient for large MRs
  IB/qib: Change QPN increment
  IB/qib: Add fix missing from earlier patch
  IB/qib: Change receive queue/QPN selection
  IB/qib: Fix interrupt mitigation
  IB/qib: Avoid duplicate writes to the rcv head register
  IB/qib: Add a few new SERDES tunings
  IB/qib: Reset packet list after freeing
  IB/qib: New SERDES init routine and improvements to SI quality
  IB/qib: Clear WAIT_SEND flags when setting QP to error state
  IB/qib: Fix context allocation with multiple HCAs
  IB/qib: Fix multi-Florida HCA host panic on reboot
  IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better
  IB/qib: UD send with immediate receive completion has wrong size
  IB/qib: Set port physical state even if other fields are invalid
  IB/qib: Generate completion callback on errors
  ...

13 years agopowerpc/pseries: Fix build of topology stuff without CONFIG_NUMA
Benjamin Herrenschmidt [Tue, 11 Jan 2011 23:56:29 +0000 (10:56 +1100)]
powerpc/pseries: Fix build of topology stuff without CONFIG_NUMA

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agocxgb4vf: recover from failure in cxgb4vf_open()
Casey Leedom [Tue, 11 Jan 2011 23:44:40 +0000 (15:44 -0800)]
cxgb4vf: recover from failure in cxgb4vf_open()

If the Link Start fails in cxgb4vf_open(), we need to back out any state
that we've built up ...

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'master' of git://1984.lsi.us.es/net-2.6
David S. Miller [Tue, 11 Jan 2011 23:43:03 +0000 (15:43 -0800)]
Merge branch 'master' of git://1984.lsi.us.es/net-2.6

13 years agoMerge branch 'nfs-for-2.6.38' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Tue, 11 Jan 2011 23:11:56 +0000 (15:11 -0800)]
Merge branch 'nfs-for-2.6.38' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'nfs-for-2.6.38' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (89 commits)
  NFS fix the setting of exchange id flag
  NFS: Don't use vm_map_ram() in readdir
  NFSv4: Ensure continued open and lockowner name uniqueness
  NFS: Move cl_delegations to the nfs_server struct
  NFS: Introduce nfs_detach_delegations()
  NFS: Move cl_state_owners and related fields to the nfs_server struct
  NFS: Allow walking nfs_client.cl_superblocks list outside client.c
  pnfs: layout roc code
  pnfs: update nfs4_callback_recallany to handle layouts
  pnfs: add CB_LAYOUTRECALL handling
  pnfs: CB_LAYOUTRECALL xdr code
  pnfs: change lo refcounting to atomic_t
  pnfs: check that partial LAYOUTGET return is ignored
  pnfs: add layout to client list before sending rpc
  pnfs: serialize LAYOUTGET(openstateid)
  pnfs: layoutget rpc code cleanup
  pnfs: change how lsegs are removed from layout list
  pnfs: change layout state seqlock to a spinlock
  pnfs: add prefix to struct pnfs_layout_hdr fields
  pnfs: add prefix to struct pnfs_layout_segment fields
  ...

13 years agonetfilter: ebtables: make broute table work again
Florian Westphal [Tue, 11 Jan 2011 22:55:51 +0000 (23:55 +0100)]
netfilter: ebtables: make broute table work again

broute table init hook sets up the "br_should_route_hook" pointer,
which then gets called from br_input.

commit a386f99025f13b32502fe5dedf223c20d7283826
(bridge: add proper RCU annotation to should_route_hook)
introduced a typedef, and then changed this to:

br_should_route_hook_t *rhook;
[..]
rhook = rcu_dereference(br_should_route_hook);
if (*rhook(skb))

problem is that "br_should_route_hook" contains the address of the function,
so calling *rhook() results in kernel panic.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
13 years agonetfilter: fix race in conntrack between dump_table and destroy
Stephen Hemminger [Tue, 11 Jan 2011 22:54:42 +0000 (23:54 +0100)]
netfilter: fix race in conntrack between dump_table and destroy

The netlink interface to dump the connection tracking table has a race
when entries are deleted at the same time. A customer reported a crash
and the backtrace showed thatctnetlink_dump_table was running while a
conntrack entry was being destroyed.
(see https://bugzilla.vyatta.com/show_bug.cgi?id=6402).

According to RCU documentation, when using hlist_nulls the reader
must handle the case of seeing a deleted entry and not proceed
further down the linked list.  The old code would continue
which caused the scan to walk into the free list.

This patch uses locking (rather than RCU) for this operation which
is guaranteed safe, and no longer requires getting reference while
doing dump operation.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
13 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Tue, 11 Jan 2011 22:45:52 +0000 (14:45 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  UDF: Close small mem leak in udf_find_entry()
  udf: Fix directory corruption after extent merging
  udf: Protect udf_file_aio_write from possible races
  udf: Remove unnecessary bkl usages
  udf: Use of s_alloc_mutex to serialize udf_relocate_blocks() execution
  udf: Replace bkl with the UDF_I(inode)->i_data_sem for protect udf_inode_info struct
  udf: Remove BKL from free space counting functions
  udf: Call udf_add_free_space() for more blocks at once in udf_free_blocks()
  udf: Remove BKL from udf_put_super() and udf_remount_fs()
  udf: Protect default inode credentials by rwlock
  udf: Protect all modifications of LVID with s_alloc_mutex
  udf: Move handling of uniqueID into a helper function and protect it by a s_alloc_mutex
  udf: Remove BKL from udf_update_inode
  udf: Convert UDF_SB(sb)->s_flags to use bitops
  fs/udf: Add printf format/argument verification
  fs/udf: Use vzalloc

(Evil merge: this also removes the BKL dependency from the Kconfig file)

13 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Tue, 11 Jan 2011 22:37:31 +0000 (14:37 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (44 commits)
  ext4: fix trimming starting with block 0 with small blocksize
  ext4: revert buggy trim overflow patch
  ext4: don't pass entire map to check_eofblocks_fl
  ext4: fix memory leak in ext4_free_branches
  ext4: remove ext4_mb_return_to_preallocation()
  ext4: flush the i_completed_io_list during ext4_truncate
  ext4: add error checking to calls to ext4_handle_dirty_metadata()
  ext4: fix trimming of a single group
  ext4: fix uninitialized variable in ext4_register_li_request
  ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessary
  ext4: drop i_state_flags on architectures with 64-bit longs
  ext4: reorder ext4_inode_info structure elements to remove unneeded padding
  ext4: drop ec_type from the ext4_ext_cache structure
  ext4: use ext4_lblk_t instead of sector_t for logical blocks
  ext4: replace i_delalloc_reserved_flag with EXT4_STATE_DELALLOC_RESERVED
  ext4: fix 32bit overflow in ext4_ext_find_goal()
  ext4: add more error checks to ext4_mkdir()
  ext4: ext4_ext_migrate should use NULL not 0
  ext4: Use ext4_error_file() to print the pathname to the corrupted inode
  ext4: use IS_ERR() to check for errors in ext4_error_file
  ...

13 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Tue, 11 Jan 2011 22:36:55 +0000 (14:36 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext2: Resolve 'dereferencing pointer to incomplete type' when enabling EXT2_XATTR_DEBUG
  ext3: Remove redundant unlikely()
  ext2: Remove redundant unlikely()
  ext3: speed up file creates by optimizing rec_len functions
  ext2: speed up file creates by optimizing rec_len functions
  ext3: Add more journal error check
  ext3: Add journal error check in resize.c
  quota: Use %pV and __attribute__((format (printf in __quota_error and fix fallout
  ext3: Add FITRIM handling
  ext3: Add batched discard support for ext3
  ext3: Add journal error check into ext3_rename()
  ext3: Use search_dirblock() in ext3_dx_find_entry()
  ext3: Avoid uninitialized memory references with a corrupted htree directory
  ext3: Return error code from generic_check_addressable
  ext3: Add journal error check into ext3_delete_entry()
  ext3: Add error check in ext3_mkdir()
  fs/ext3/super.c: Use printf extension %pV
  fs/ext2/super.c: Use printf extension %pV
  ext3: don't update sb journal_devnum when RO dev

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh...
Linus Torvalds [Tue, 11 Jan 2011 22:36:08 +0000 (14:36 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Don't set dentry->d_op in create routines
  fs/9p: fix spelling typo
  fs/9p: TREADLINK bugfix
  net/9p: Use proper data types
  fs/9p: Simplify the .L create operation
  fs/9p: Move dotl inode operations into a seperate file
  fs/9p: fix menu presentation
  fs/9p: Fix the return error on default acl removal
  fs/9p: Remove unnecessary semicolons

13 years agoah: reload pointers to skb data after calling skb_cow_data()
Dang Hongwu [Tue, 11 Jan 2011 07:13:33 +0000 (07:13 +0000)]
ah: reload pointers to skb data after calling skb_cow_data()

skb_cow_data() may allocate a new data buffer, so pointers on
skb should be set after this function.

Bug was introduced by commit dff3bb06 ("ah4: convert to ahash")
and 8631e9bd ("ah6: convert to ahash").

Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com>
Acked-by: Krzysztof Witek <krzysztof.witek@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoah: update maximum truncated ICV length
Nicolas Dichtel [Tue, 11 Jan 2011 08:06:19 +0000 (08:06 +0000)]
ah: update maximum truncated ICV length

For SHA256, RFC4868 requires to truncate ICV length to 128 bits,
hence MAX_AH_AUTH_LEN should be updated to 16.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoxfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC
Nicolas Dichtel [Tue, 11 Jan 2011 08:04:12 +0000 (08:04 +0000)]
xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC

Maximum trunc length is defined by MAX_AH_AUTH_LEN (in bytes)
and need to be checked when this value is set (in bits) by
the user. In ah4.c and ah6.c a BUG_ON() checks this condiftion.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Increase the skb array usage
Breno Leitao [Tue, 11 Jan 2011 07:45:57 +0000 (07:45 +0000)]
ehea: Increase the skb array usage

Currently the skb array is not fully allocated, and the allocation
is done as it's requested, which is not the expected way.

This patch just allocate the full skb array at driver initialization.
Also, this patch increases ehea version to 107.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/fec: remove config FEC2 as it's used nowhere
Shawn Guo [Tue, 11 Jan 2011 02:07:52 +0000 (02:07 +0000)]
net/fec: remove config FEC2 as it's used nowhere

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agopcnet_cs: add new_id
Ken Kawasaki [Tue, 11 Jan 2011 01:55:58 +0000 (01:55 +0000)]
pcnet_cs: add new_id

pcnet_cs:
     add another ID of "corega Ether CF-TD" 10Base-T PCMCIA card.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: disallow bind() to reuse addr/port
Eric Dumazet [Tue, 11 Jan 2011 01:14:22 +0000 (01:14 +0000)]
tcp: disallow bind() to reuse addr/port

inet_csk_bind_conflict() logic currently disallows a bind() if
it finds a friend socket (a socket bound on same address/port)
satisfying a set of conditions :

1) Current (to be bound) socket doesnt have sk_reuse set
OR
2) other socket doesnt have sk_reuse set
OR
3) other socket is in LISTEN state

We should add the CLOSE state in the 3) condition, in order to avoid two
REUSEADDR sockets in CLOSE state with same local address/port, since
this can deny further operations.

Note : a prior patch tried to address the problem in a different (and
buggy) way. (commit fda48a0d7a8412ced tcp: bind() fix when many ports
are bound).

Reported-by: Gaspar Chilingarov <gasparch@gmail.com>
Reported-by: Daniel Baluta <daniel.baluta@gmail.com>
Tested-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoext4: fix trimming starting with block 0 with small blocksize
Jan Kara [Tue, 11 Jan 2011 20:16:31 +0000 (15:16 -0500)]
ext4: fix trimming starting with block 0 with small blocksize

When s_first_data_block is not zero (which happens e.g. when block size is 1KB)
and trim ioctl is called to start trimming from block 0, the math in
ext4_get_group_no_and_offset() overflows. The overall result is that ioctl
returns EINVAL which is kind of unexpected and we probably don't want
userspace tools to bother with internal details of filesystem structure.
So just silently increase starting offset (and shorten length) when starting
block is below s_first_data_block.

CC: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
13 years agoext4: revert buggy trim overflow patch
Theodore Ts'o [Tue, 11 Jan 2011 19:42:29 +0000 (14:42 -0500)]
ext4: revert buggy trim overflow patch

This reverts commit 4f531501e44: ext4: fix possible overflow in
ext4_trim_fs()

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
13 years agoMerge branch 'for-linus-merged' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Tue, 11 Jan 2011 19:42:06 +0000 (11:42 -0800)]
Merge branch 'for-linus-merged' of git://oss.sgi.com/xfs/xfs

* 'for-linus-merged' of git://oss.sgi.com/xfs/xfs: (47 commits)
  xfs: convert grant head manipulations to lockless algorithm
  xfs: introduce new locks for the log grant ticket wait queues
  xfs: convert log grant heads to atomic variables
  xfs: convert l_tail_lsn to an atomic variable.
  xfs: convert l_last_sync_lsn to an atomic variable
  xfs: make AIL tail pushing independent of the grant lock
  xfs: use wait queues directly for the log wait queues
  xfs: combine grant heads into a single 64 bit integer
  xfs: rework log grant space calculations
  xfs: fact out common grant head/log tail verification code
  xfs: convert log grant ticket queues to list heads
  xfs: use AIL bulk delete function to implement single delete
  xfs: use AIL bulk update function to implement single updates
  xfs: remove all the inodes on a buffer from the AIL in bulk
  xfs: consume iodone callback items on buffers as they are processed
  xfs: reduce the number of AIL push wakeups
  xfs: bulk AIL insertion during transaction commit
  xfs: clean up xfs_ail_delete()
  xfs: Pull EFI/EFD handling out from under the AIL lock
  xfs: fix EFI transaction cancellation.
  ...

13 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Tue, 11 Jan 2011 19:28:34 +0000 (11:28 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits)
  MAINTAINERS: Update Joel Becker's email address
  ocfs2: Remove unused truncate function from alloc.c
  ocfs2/cluster: dereferencing before checking in nst_seq_show()
  ocfs2: fix build for OCFS2_FS_STATS not enabled
  ocfs2/cluster: Show o2net timing statistics
  ocfs2/cluster: Track process message timing stats for each socket
  ocfs2/cluster: Track send message timing stats for each socket
  ocfs2/cluster: Use ktime instead of timeval in struct o2net_sock_container
  ocfs2/cluster: Replace timeval with ktime in struct o2net_send_tracking
  ocfs2: Add DEBUG_FS dependency
  ocfs2/dlm: Hard code the values for enums
  ocfs2/dlm: Minor cleanup
  ocfs2/dlm: Cleanup dlmdebug.c
  ocfs2: Release buffer_head in case of error in ocfs2_double_lock.
  ocfs2/cluster: Pin the local node when o2hb thread starts
  ocfs2/cluster: Show pin state for each o2hb region
  ocfs2/cluster: Pin/unpin o2hb regions
  ocfs2/cluster: Remove dropped region from o2hb quorum region bitmap
  ocfs2/cluster: Pin the remote node item in configfs
  ocfs2/dlm: make existing convertion precedent over new lock
  ...

13 years agoNFS fix the setting of exchange id flag
Andy Adamson [Tue, 14 Dec 2010 15:11:57 +0000 (10:11 -0500)]
NFS fix the setting of exchange id flag

Indicate support for referrals. Do not set any PNFS roles. Check the flags
returned by the server for validity. Do not use exchange flags from an old
client ID instance when recovering a client ID.

Update the EXCHID4_FLAG_XXX set to RFC 5661.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
13 years agoMerge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Tue, 11 Jan 2011 19:13:46 +0000 (11:13 -0800)]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: remove obsolete DEBUG_BOOTMEM
  microblaze: trivial: Fix removed the part of line
  microblaze: Fix __muldi3 function for little-endian.
  microblaze: Clear i/dcache for sw breakpoints
  microblaze: Remove useless early_init_dt_check_for_initrd
  microblaze: Fix unaligned exception for little endian platform
  microblaze: Add PVR for Microblaze v8.00.b
  microblaze: Correct PVR access macros
  Revert "microblaze: Simplify syscall rutine"
  microblaze: Fix initramfs
  arch/microblaze: Remove unnecessary semicolons

13 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 11 Jan 2011 19:11:46 +0000 (11:11 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix Moorestown VRTC fixmap placement
  x86/gpio: Implement x86 gpio_to_irq convert function
  x86, UV: Fix APICID shift for Westmere processors
  x86: Use PCI method for enabling AMD extended config space before MSR method
  x86: tsc: Prevent delayed init if initial tsc calibration failed
  x86, lapic-timer: Increase the max_delta to 31 bits
  x86: Fix sparse non-ANSI function warnings in smpboot.c
  x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation
  x86, AMD, PCI: Add AMD northbridge PCI device id for CPU families 12h and 14h
  x86, numa: Fix cpu to node mapping for sparse node ids
  x86, numa: Fake node-to-cpumask for NUMA emulation
  x86, numa: Fake apicid and pxm mappings for NUMA emulation
  x86, numa: Avoid compiling NUMA emulation functions without CONFIG_NUMA_EMU
  x86, numa: Reduce minimum fake node size to 32M

Fix up trivial conflict in arch/x86/kernel/apic/x2apic_uv_x.c

13 years agoMerge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 11 Jan 2011 19:06:41 +0000 (11:06 -0800)]
Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rtc: Namespace fixup
  RTC: Remove UIE emulation
  RTC: Rework RTC code to use timerqueue for events

Fix up trivial conflict in drivers/rtc/rtc-dev.c

13 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 11 Jan 2011 19:02:13 +0000 (11:02 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  perf session: Fix infinite loop in __perf_session__process_events
  perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1)
  perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail
  perf tools: Emit clearer message for sys_perf_event_open ENOENT return
  perf stat: better error message for unsupported events
  perf sched: Fix allocation result check
  perf, x86: P4 PMU - Fix unflagged overflows handling
  dynamic debug: Fix build issue with older gcc
  tracing: Fix TRACE_EVENT power tracepoint creation
  tracing: Fix preempt count leak
  tracepoint: Add __rcu annotation
  tracing: remove duplicate null-pointer check in skb tracepoint
  tracing/trivial: Add missing comma in TRACE_EVENT comment
  tracing: Include module.h in define_trace.h
  x86: Save rbp in pt_regs on irq entry
  x86, dumpstack: Fix unused variable warning
  x86, NMI: Clean-up default_do_nmi()
  x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU
  x86, NMI: Remove DIE_NMI_IPI
  x86, NMI: Add priorities to handlers
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Tue, 11 Jan 2011 19:01:24 +0000 (11:01 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (39 commits)
  mmc: davinci: add support for SDIO irq handling
  mmc: fix division by zero in MMC core
  mmc: tmio_mmc: fix CMD irq handling
  mmc: tmio_mmc: handle missing HW interrupts
  mfd: sh_mobile_sdhi: activate SDIO IRQ for tmio_mmc
  mmc: tmio_mmc: implement SDIO IRQ support
  mfd: sdhi: require the tmio-mmc driver to bounce unaligned buffers
  mmc: tmio_mmc: silence compiler warnings
  mmc: tmio_mmc: implement a bounce buffer for unaligned DMA
  mmc: tmio_mmc: merge the private header into the driver
  mmc: tmio_mmc: fix PIO fallback on DMA descriptor allocation failure
  mmc: tmio_mmc: allow multi-element scatter-gather lists
  mmc: Register debugfs dir before calling card probe function.
  mmc: MMC_BLOCK_MINORS should depend on MMC_BLOCK.
  mmc: Explain why we make adjacent mmc_bus_{put,get} calls during rescan.
  mmc: Fix sd/sdio/mmc initialization frequency retries
  mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap
  mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.
  mmc: add sdhci-tegra driver for Tegra SoCs
  mmc: sdhci: add quirk for max len ADMA descriptors
  ...

13 years agofs/9p: Don't set dentry->d_op in create routines
Aneesh Kumar K.V [Tue, 11 Jan 2011 08:14:47 +0000 (08:14 +0000)]
fs/9p: Don't set dentry->d_op in create routines

We do set dentry->d_op in lookup even in case of EOENT entries.
That implies we should have dentry->d_op already set when
create/mkdir/mknod/link/symlink routines are called

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agofs/9p: fix spelling typo
Eric Van Hensbergen [Tue, 11 Jan 2011 15:49:03 +0000 (09:49 -0600)]
fs/9p: fix spelling typo

introduced a typo somehow during a hand merge

Reported by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agofs/9p: TREADLINK bugfix
M. Mohan Kumar [Sat, 8 Jan 2011 01:58:46 +0000 (07:28 +0530)]
fs/9p: TREADLINK bugfix

Remove v9fs_vfs_readlink_dotl function and use generic_readlink. Update
v9fs_vfs_follow_link_dotl function to accommodate this change

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agonet/9p: Use proper data types
M. Mohan Kumar [Mon, 10 Jan 2011 20:23:53 +0000 (14:23 -0600)]
net/9p: Use proper data types

Use proper data types for storing the count of the binary blob and
length of a string. Without this patch length calculation of string will
always result in -1 because of comparision between signed and unsigned
integer.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agofs/9p: Simplify the .L create operation
Aneesh Kumar K.V [Mon, 10 Jan 2011 20:22:21 +0000 (14:22 -0600)]
fs/9p: Simplify the .L create operation

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agofs/9p: Move dotl inode operations into a seperate file
Aneesh Kumar K.V [Mon, 10 Jan 2011 19:51:47 +0000 (13:51 -0600)]
fs/9p: Move dotl inode operations into a seperate file

Source Code Reorganization

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agofs/9p: fix menu presentation
Randy Dunlap [Sun, 2 Jan 2011 06:15:54 +0000 (06:15 +0000)]
fs/9p: fix menu presentation

Make the 9P_FS kconfig options subordinate to the 9P_FS kconfig symbol
in the menu presentation instead of them all being at the same level.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agofs/9p: Fix the return error on default acl removal
Aneesh Kumar K.V [Fri, 10 Dec 2010 06:49:31 +0000 (12:19 +0530)]
fs/9p: Fix the return error on default acl removal

If we don't have default ACL, then trying to remove
default acl on a file should return 0.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
13 years agofs/9p: Remove unnecessary semicolons
Joe Perches [Mon, 15 Nov 2010 03:04:51 +0000 (03:04 +0000)]
fs/9p: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
13 years agox86: Fix Moorestown VRTC fixmap placement
Arjan van de Ven [Tue, 11 Jan 2011 10:55:56 +0000 (10:55 +0000)]
x86: Fix Moorestown VRTC fixmap placement

The x86 fixmaps need to be all together... unfortunately the
VRTC one was misplaced.

This patch makes sure the MRST VRTC fixmap is put prior to the
__end_of_permanent_fixed_addresses marker.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20110111105544.24448.27607.stgit@bob.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86/gpio: Implement x86 gpio_to_irq convert function
Alek Du [Tue, 11 Jan 2011 10:55:32 +0000 (10:55 +0000)]
x86/gpio: Implement x86 gpio_to_irq convert function

We need this for x86 MID platforms where GPIO interrupts are
used. No special magic is needed so the default 1:1 behaviour
will do nicely.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20110111105439.24448.69863.stgit@bob.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86, UV: Fix APICID shift for Westmere processors
Jack Steiner [Mon, 10 Jan 2011 19:52:11 +0000 (13:52 -0600)]
x86, UV: Fix APICID shift for Westmere processors

Westmere processors use a different algorithm for
assigning APICIDs on SGI UV systems. The location of the
node number within the apicid is now a function of the
processor type.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20110110195210.GA18737@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: Use PCI method for enabling AMD extended config space before MSR method
Jan Beulich [Mon, 10 Jan 2011 16:20:23 +0000 (16:20 +0000)]
x86: Use PCI method for enabling AMD extended config space before MSR method

While both methods should work equivalently well for the native
case, the Xen Dom0 case can't reliably work with the MSR one,
since there's no guarantee that the virtual CPUs it has
available fully cover all necessary physical ones.

As per the suggestion of Robert Richter the patch only adds the
PCI method, but leaves the MSR one as a fallback to cover new
systems the PCI IDs of which may not have got added to the code
base yet.

The only change in v2 is the breaking out of the new CPI
initialization method into a separate function, as requested by
Ingo.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Andreas Herrmann3 <Andreas.Herrmann3@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <4D2B3FD7020000780002B67D@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: tsc: Prevent delayed init if initial tsc calibration failed
Thomas Gleixner [Tue, 11 Jan 2011 10:40:48 +0000 (11:40 +0100)]
x86: tsc: Prevent delayed init if initial tsc calibration failed

commit a8760ec (x86: Check tsc available/disabled in the delayed init
function) missed to prevent the setup of the delayed init function in
case the initial tsc calibration failed. This results in the same
divide by zero bug as we have seen without the tsc disabled check.

Skip the delayed work setup when tsc_khz (the initial calibration
value) is 0.

Bisected-and-tested-by: Kirill A. Shutemov <kas@openvz.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agopowerpc/pseries: Fix VPHN build errors on non-SMP systems
Jesse Larrew [Fri, 17 Dec 2010 22:07:47 +0000 (22:07 +0000)]
powerpc/pseries: Fix VPHN build errors on non-SMP systems

The header asm/hvcall.h was previously included indirectly via
smp.h. On non-SMP systems, however, these declarations are excluded
and the build breaks. This is easily fixed by including asm/hvcall.h
directly.

The VPHN feature is only meaningful on NUMA systems that implement
the SPLPAR option, so exclude the VPHN code on systems without
SPLPAR enabled.

Also, expose unmap_cpu_from_node() on systems with SPLPAR enabled,
even if CONFIG_HOTPLUG_CPU is disabled.

Lastly, map_cpu_to_node() is now needed by VPHN to manipulate the
node masks after boot time, so remove the __cpuinit annotation to
fix a section mismatch.

Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
13 years agoMerge remote branch 'gcl/next' into next
Benjamin Herrenschmidt [Tue, 11 Jan 2011 04:10:08 +0000 (15:10 +1100)]
Merge remote branch 'gcl/next' into next

13 years agoMerge branch 'master' into for-linus-merged
Alex Elder [Tue, 11 Jan 2011 03:35:55 +0000 (21:35 -0600)]
Merge branch 'master' into for-linus-merged

This merge pulls the XFS master branch into the latest Linus master.
This results in a merge conflict whose best fix is not obvious.
I manually fixed the conflict, in "fs/xfs/xfs_iget.c".

Dave Chinner had done work that resulted in RCU freeing of inodes
separate from what Nick Piggin had done, and their results differed
slightly in xfs_inode_free().  The fix updates Nick's call_rcu()
with the use of VFS_I(), while incorporating needed updates to some
XFS inode fields implemented in Dave's series.  Dave's RCU callback
function has also been removed.

Signed-off-by: Alex Elder <aelder@sgi.com>
13 years agoMerge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and 'srp...
Roland Dreier [Tue, 11 Jan 2011 01:43:30 +0000 (17:43 -0800)]
Merge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and 'srp' into for-next

13 years agoIB/qib: Fix refcount leak in lkey/rkey validation
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:23 +0000 (17:42 -0800)]
IB/qib: Fix refcount leak in lkey/rkey validation

The mr optimization introduced a reference count leak on an exception
test.  The lock/refcount manipulation is moved down and the problematic
exception test now calls bail to insure that the lock is released.

Additional fixes as suggested by Ralph Campbell <ralph.campbell@qlogic.org>:
- reduce lock scope of dma regions
- use explicit values on returns vs. automatic ret value

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Improve SERDES tunning on QMH boards
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:22 +0000 (17:42 -0800)]
IB/qib: Improve SERDES tunning on QMH boards

Improve the QMH SERDES tunning on initial driver load by having the
driver go through a link state change.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Unnecessary delayed completions on RC connection
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:22 +0000 (17:42 -0800)]
IB/qib: Unnecessary delayed completions on RC connection

Currently on receipt of a response message (ACKs, RDMA Response,
Atomic Responses etc.) if the SDMA completion counter is not advanced
the driver delays the completion of the WQE.  In most cases this is
overly pessimistic as the response (ACK) to a previously transmitted
send implies that the send is complete.  Ensure that SDMA queue is
progressed appropriately before determining if a send has delayed
completions.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Issue pre-emptive NAKs on eager buffer overflow
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:22 +0000 (17:42 -0800)]
IB/qib: Issue pre-emptive NAKs on eager buffer overflow

Under congestion resulting in eager buffer overflow attempt to send
pre-emptive NAKs if header queue entries with TID errors are generated
and a valid header is present.  This prevents long timeouts and flow
restarts if a trailing set of packets are dropped due to eager
overflows.  Pre-emptive NAKs are currently only supported for RDMA
writes.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: RDMA lkey/rkey validation is inefficient for large MRs
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:22 +0000 (17:42 -0800)]
IB/qib: RDMA lkey/rkey validation is inefficient for large MRs

The current code loops during rkey/lkey validiation to isolate the MR
for the RDMA, which is expensive when the current operation is inside
a very large memory region.

This fix optimizes rkey/lkey validation routines for user memory
regions and fast memory regions.  The MR entry can be isolated by
shifts/mods instead of looping.  The existing loop is preserved for
phys memory regions for now.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Change QPN increment
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:22 +0000 (17:42 -0800)]
IB/qib: Change QPN increment

Changing from +1 to +2 allows for better QP distribution across
receive contexts.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Add fix missing from earlier patch
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:21 +0000 (17:42 -0800)]
IB/qib: Add fix missing from earlier patch

The upstream code was missing part of a receive/error race fix from
the internal tree.  Add the missing part, which makes future merges
possible.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Change receive queue/QPN selection
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:21 +0000 (17:42 -0800)]
IB/qib: Change receive queue/QPN selection

The basic idea is that on SusieQ, the difficult part of mapping QPN to
context is handled by the mapping registers so the generic QPN
allocation doesn't need to worry about chip specifics.  For Monty and
Linda, there is no mapping table so the qpt->mask (same as
dd->qpn_mask), is used to see if the QPN to context falls within
[zero..dd->n_krcv_queues).

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Fix interrupt mitigation
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:21 +0000 (17:42 -0800)]
IB/qib: Fix interrupt mitigation

For SusieQ we need to write to the interrupt timer register before
updating the header queue head with interrupt count.  This is to
ensure that the timer is enabled properly and a receive available
interrupt is delivered.  Otherwise this interrupt can be lost if the
receiver header/eager queues are full before the timer is enabled.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Avoid duplicate writes to the rcv head register
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:21 +0000 (17:42 -0800)]
IB/qib: Avoid duplicate writes to the rcv head register

Avoid duplicate writes to the head register as this can lead to lost
interrupts if the context goes full before the second write is done.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Add a few new SERDES tunings
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:21 +0000 (17:42 -0800)]
IB/qib: Add a few new SERDES tunings

Add new SERDES tuning to aid manufacturing.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Reset packet list after freeing
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:21 +0000 (17:42 -0800)]
IB/qib: Reset packet list after freeing

Reset the list pointers after freeing the SDMA packet list.  This is
done to any potential double-free cases.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: New SERDES init routine and improvements to SI quality
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:20 +0000 (17:42 -0800)]
IB/qib: New SERDES init routine and improvements to SI quality

Implement new SERDES initialization routine and improvements to signal
integrity -- disable LE1 adaptation, disable LOS after link-up, set
better SERDES parameters.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Clear WAIT_SEND flags when setting QP to error state
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:20 +0000 (17:42 -0800)]
IB/qib: Clear WAIT_SEND flags when setting QP to error state

If these flags are set when the QP is transitioned to the error state,
it will wait until the flags are cleared, which may never happen if
the error transition is due to a link going down.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Fix context allocation with multiple HCAs
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:20 +0000 (17:42 -0800)]
IB/qib: Fix context allocation with multiple HCAs

The driver was incorrectly choosing HCAs on which to allocate new user
contexts based on overall count of usable ports regardless whether the
usable port was on the currently selected HCA.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Fix multi-Florida HCA host panic on reboot
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:20 +0000 (17:42 -0800)]
IB/qib: Fix multi-Florida HCA host panic on reboot

Add check when setting configured contexts that the value does not
exceed the number of contexts allocated for the card.  If the value
exceeds the already allocated count, set it to what is already
allocated.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:20 +0000 (17:42 -0800)]
IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better

When the link transitions from ACTIVE_DEFERRED to ACTIVE, the driver
only sees the ACTIVE state. With this change, it will check whether
the state was already ACTIVE and if so, it will not generated IB
events and will not clear symbol error counts.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: UD send with immediate receive completion has wrong size
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:20 +0000 (17:42 -0800)]
IB/qib: UD send with immediate receive completion has wrong size

The code to generate receive completion entries for UD send with
immediate contains the wrong payload length.  This is because when the
code to compute the payload size was moved, the value of hdrsize
didn't get moved too.  The fix is to update tlen directly.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Set port physical state even if other fields are invalid
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:19 +0000 (17:42 -0800)]
IB/qib: Set port physical state even if other fields are invalid

The IBTA vol. 1 release 1.2.1 spec. says:
C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall
make any changes it specifies to PortInfo:PortPhysicalState; any other
result is vendor-dependent.

The patch changes the error handling so that the reply says there are
invalid fields but still attempts to set fields that are in range
including PortInfo:PortPhysicalState.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Generate completion callback on errors
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:19 +0000 (17:42 -0800)]
IB/qib: Generate completion callback on errors

According to IBTA vol. 1, C11-30.1.1, a notification callback is
invoked if the CQ is armed for the next solicited completion event or
an error completion.  The error case wasn't being generated correctly.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Add support for the new QME7362 card
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:19 +0000 (17:42 -0800)]
IB/qib: Add support for the new QME7362 card

Add support to recognize another board variation named QME7362.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Add receive header queue size module parameters
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:19 +0000 (17:42 -0800)]
IB/qib: Add receive header queue size module parameters

The receive header queue sizes need to modified for performance
tuning.  Three module parameters are added to support this.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/qib: Remove IB latency turnoff
Mike Marciniszyn [Tue, 11 Jan 2011 01:42:19 +0000 (17:42 -0800)]
IB/qib: Remove IB latency turnoff

This is required for hardware testing.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoRDMA/nes: Fix string continuation line
Joe Perches [Tue, 11 Jan 2011 01:42:14 +0000 (17:42 -0800)]
RDMA/nes: Fix string continuation line

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/mthca: Handle -ENOMEM in forward_trap()
Dan Carpenter [Tue, 11 Jan 2011 01:42:10 +0000 (17:42 -0800)]
IB/mthca: Handle -ENOMEM in forward_trap()

ib_create_send_mad() can return ERR_PTR(-ENOMEM) here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/mlx4: Handle -ENOMEM in forward_trap()
Dan Carpenter [Tue, 11 Jan 2011 01:42:06 +0000 (17:42 -0800)]
IB/mlx4: Handle -ENOMEM in forward_trap()

ib_create_send_mad() can return ERR_PTR(-ENOMEM) here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agomlx4_core: Avoid vunmap() of invalid pointer if allocation fails
Ali Ayoub [Tue, 11 Jan 2011 01:42:06 +0000 (17:42 -0800)]
mlx4_core: Avoid vunmap() of invalid pointer if allocation fails

Signed-off-by: Ali Ayoub <ali@mellanox.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/mlx4: Don't call dma_free_coherent() with irqs disabled
Vladimir Sokolovsky [Tue, 11 Jan 2011 01:42:06 +0000 (17:42 -0800)]
IB/mlx4: Don't call dma_free_coherent() with irqs disabled

mlx4_ib_free_cq_buf() should not be called under spin_lock_irq() since
it calls dma_free_coherent(), which needs irqs enabled.  Fix this by
deferring the free to outside the locked region.

This was found due to the

WARN_ON(irqs_disabled());

in swiotlb_free_coherent().

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agomlx4_core: Remove warning message about firmware bug
Roland Dreier [Tue, 11 Jan 2011 01:42:05 +0000 (17:42 -0800)]
mlx4_core: Remove warning message about firmware bug

The kernel warning message added in commit 58d74bb1d9f7 ("mlx4_core:
Workaround firmware bug in query dev cap") about mlx4 reporting the
wrong number of "blue flame registers" doesn't really help anyone, since
the firmware bug is known and fixed and the bug is pretty much harmless
to users.  So just get rid of the warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIPoIB: Add GRO support
Or Gerlitz [Tue, 11 Jan 2011 01:41:55 +0000 (17:41 -0800)]
IPoIB: Add GRO support

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIPoIB: Remove LRO support
Or Gerlitz [Tue, 11 Jan 2011 01:41:54 +0000 (17:41 -0800)]
IPoIB: Remove LRO support

As a first step in moving from LRO to GRO, revert commit af40da894e9
("IPoIB: add LRO support").  Also eliminate the ethtool set_flags
callback which isn't needed anymore.  Finally, we need to include
<linux/sched.h> directly to get the declaration of restart_syscall()
(which used to be included implicitly through <linux/inet_lro.h>).

Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoIB/ipath: Use printf extension %pR for struct resource
Joe Perches [Tue, 11 Jan 2011 01:41:50 +0000 (17:41 -0800)]
IB/ipath: Use printf extension %pR for struct resource

Using %pR standardizes the struct resource output.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoRDMA/cxgb4: Don't re-init wait object in init/fini paths
Steve Wise [Tue, 11 Jan 2011 01:41:43 +0000 (17:41 -0800)]
RDMA/cxgb4: Don't re-init wait object in init/fini paths

Re-initializing the wait object in rdma_init()/rdma_fini() causes a
timing window which can lead to a deadlock during close.  Once this
deadlock hits, all RDMA activity over the T4 device will be stuck.

There's no need to re-init the wait object, so remove it.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoRDMA/cxgb3,cxgb4: Remove dead code
Stephen Hemminger [Tue, 11 Jan 2011 01:41:43 +0000 (17:41 -0800)]
RDMA/cxgb3,cxgb4: Remove dead code

This removes unused code found by running 'make namespacecheck';
compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
13 years agoMerge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Tue, 11 Jan 2011 01:11:39 +0000 (17:11 -0800)]
Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (390 commits)
  drm/radeon/kms: disable underscan by default
  drm/radeon/kms: only enable hdmi features if the monitor supports audio
  drm: Restore the old_fb upon modeset failure
  drm/nouveau: fix hwmon device binding
  radeon: consolidate asic-specific function decls for pre-r600
  vga_switcheroo: comparing too few characters in strncmp()
  drm/radeon/kms: add NI pci ids
  drm/radeon/kms: don't enable pcie gen2 on NI yet
  drm/radeon/kms: add radeon_asic struct for NI asics
  drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init
  drm/radeon/kms: add ucode loader for NI
  drm/radeon/kms: add support for DCE5 display LUTs
  drm/radeon/kms: add ni_reg.h
  drm/radeon/kms: add bo blit support for NI
  drm/radeon/kms: always use writeback/events for fences on NI
  drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5
  drm/radeon/kms: add backend map workaround for barts
  drm/radeon/kms: fill gpu init for NI asics
  drm/radeon/kms: add disabled vbios accessor for NI asics
  drm/radeon/kms: handle NI thermal controller
  ...

13 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Tue, 11 Jan 2011 01:09:13 +0000 (17:09 -0800)]
Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Constify i2c_client where possible
  i2c-algo-bit: Complain about masters which can't read SCL
  i2c-algo-bit: Refactor adapter registration
  i2c: Add generic I2C multiplexer using GPIO API
  i2c-nforce2: Remove unnecessary cast of pci_get_drvdata
  i2c-i801: Include <linux/slab.h>

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Tue, 11 Jan 2011 01:06:08 +0000 (17:06 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (52 commits)
  Blackfin: encode cpu-rev into uImage name
  Blackfin: bf54x: don't ack GPIO ints when unmasking them
  Blackfin: sram_free_with_lsl: do not ignore return value of sram_free
  Blackfin: boards: add missing "static" to peripheral lists
  Blackfin: DNP5370: new board port
  Blackfin: bf518f-ezbrd: fix dsa resources
  Blackfin: move "-m elf32bfin" to general LDFLAGS
  Blackfin: kgdb_test: make sure to initialize num2
  Blackfin: kgdb: disable preempt schedule when running single step in kgdb
  Blackfin: kgdb: disable interrupt when single stepping in ADEOS
  Blackfin: SMP: kgdb: apply anomaly 257 work around
  Blackfin: fix building IPIPE code when XIP is enabled
  Blackfin: SMP: kgdb: flush core internal write buffer before flushinv
  Blackfin: sport_uart resources: remove unused secondary RX/TX pins
  Blackfin: tll6527m: fix spelling in unused code (struct name)
  Blackfin: bf527-ezkit: add adau1373 chip address
  Blackfin: no-mpu: fix masking of small uncached dma region
  Blackfin: pm: drop irq save/restore in standby and suspend to mem callback
  MAINTAINERS: update Analog Devices support info
  Blackfin: dpmc.h: pull in new pll.h
  ...

13 years agoperf session: Fix infinite loop in __perf_session__process_events
Arnaldo Carvalho de Melo [Mon, 10 Jan 2011 23:37:57 +0000 (21:37 -0200)]
perf session: Fix infinite loop in __perf_session__process_events

In this if statement:

        if (head + event->header.size >= mmap_size) {
                if (mmaps[map_idx]) {
                        munmap(mmaps[map_idx], mmap_size);
                        mmaps[map_idx] = NULL;
                }

                page_offset = page_size * (head / page_size);
                file_offset += page_offset;
                head -= page_offset;
                goto remap;
        }

With, for instance, these values:

head=2992
event->header.size=48
mmap_size=3040

We end up endlessly looping back to remap. Off by one.

Problem introduced in 55b4462.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: David Ahern <daahern@cisco.com>
Bisected-by: David Ahern <daahern@cisco.com>
Tested-by: David Ahern <daahern@cisco.com>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>