]>
git.karo-electronics.de Git - karo-tx-linux.git/log
Shawn Guo [Sun, 11 May 2014 13:59:26 +0000 (21:59 +0800)]
ARM: dts: imx: add pin function header for imx6sx
Add pin function header for i.MX6 SoloX SoC.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shawn Guo [Sun, 18 May 2014 03:22:01 +0000 (11:22 +0800)]
Merge tag 'imx-dt-3.16' into staging-3.16
i.MX device tree changes for 3.16:
- New board support: imx35-pdk, imx51-digi-connectcore, imx6dl-phytec,
imx6dl-riotboard, and vf610-colibri.
- Improve device tree support for imx51-babbage and eukrea-cpuimx51 to
get the same level support as board files, so that we can kill the
board files.
- Quite some updates on imx27-phytec-phycore board support from
Alexander Shiyan
- Enable USB, sound and touchscreen on the eukrea imx25/35/51 boards,
from Denis Carikli
- Quite a lot of patches from Fabio Estevam, updating Freescale
imx25-pdk and imx27-pdk board support
- Correct USB device configuration for imx25/35
- Fixes i2c4 device node in imx6dl.dtsi regarding to compatible string
and clock data
- Enable HDMI, TVE, LVDS display support on a bunch of imx5/6 boards
- Update PCIe to the new binding and enable PCIe support on
imx6qdl-sabresd board
- A couple of imx6q-dmo-edmqmx6 updates from Lucas Stach, adding pfuze
irq gpio and SPI flash
- Enable CODA7541 VPU for i.MX53
- A series of updates on imx6qdl-phytec boards from Philipp Zabel
- Small cleanups and fixes on board imx28-duckbill - Michael Heimpold
- Add stdout-path property to i.MX boards
- Karo TX25 board updates from Sascha Hauer
- Enable pwm and sdhc devices for board vf610-twr
Shawn Guo [Sun, 18 May 2014 03:21:55 +0000 (11:21 +0800)]
Merge tag 'imx-soc-3.16' into staging-3.16
i.MX SoC changes for 3.16:
- A few cleanups on mx21ads board file, which should make the later
conversion to DT a little bit easier.
- Add some missing clocks and drop unused clk lookups for i.MX1 and
i.MX27 clock drivers
- Add initial i.MX SoloX (imx6sx) SoC support
- Remove mx51_babbage and mach-cpuimx51sd board files, as the
equivalent DT support is ready for the boards
- Clean up device tree timer initialization a little bit
- Add missing i2c4 clock for i.MX6 DualLite/Solo
- Add missing CKO clock i.MX25
- Add shared gate clock support for i.MX specific clk_gate2
- Add low-level debug support for SoC VF610
- Some random code cleanups and defconfig updates
Fabio Estevam [Tue, 13 May 2014 01:04:24 +0000 (22:04 -0300)]
ARM: dts: imx35-pdk: Fix memory region description
On imx35pdk there are two DRAM chip selects that are used:
CS0 at 0x80000000
CS1 at 0x90000000
Each bank is connected to 128MB of DRAM, giving a total of 256MB of system DRAM.
Fix the memory layout to describe the hardware appropriately.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sat, 10 May 2014 15:47:35 +0000 (12:47 -0300)]
ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support
Add support for CAN based on a MCP2515 connected to ECSPI1.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Iain Paton [Fri, 9 May 2014 15:02:11 +0000 (16:02 +0100)]
ARM: dts: imx6: add new board RIoTboard
add element14s RIoTboard http://www.riotboard.org which is an i.MX6Solo
based design targeted at makers.
Signed-off-by: Iain Paton<ipaton0@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Iain Paton [Fri, 9 May 2014 15:01:56 +0000 (16:01 +0100)]
ARM: dts: imx6: i2c4 cleanup
add missing i2c4 clock and correct the compatible string to match other
imx6 i2c blocks
Signed-off-by: Iain Paton<ipaton0@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Silvio Fricke [Thu, 17 Apr 2014 13:28:06 +0000 (15:28 +0200)]
ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:19 +0000 (08:11 +0200)]
ARM: dts: Karo TX25: use hardware ecc
We should use hardware ecc on i.MX. While at it, add the optional
nand-bus-width property.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 11:59:55 +0000 (19:59 +0800)]
ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:17 +0000 (08:11 +0200)]
ARM: dts: Karo TX25: Add pinctrl nodes
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:16 +0000 (08:11 +0200)]
ARM: dts: i.MX25: Add IRAM node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Fri, 9 May 2014 06:11:14 +0000 (08:11 +0200)]
ARM: dts: i.MX25: Add mmc aliases
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Thu, 8 May 2014 06:17:30 +0000 (08:17 +0200)]
ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
The dts relied on the FEC pad ctrl settings from the bootloader by
using the NO_PAD_CTRL option. This breaks once the bootloader starts
initializing the pad ctrl settings from the same dts file. Change
to real pad ctrl settings taken from the platform based babbage
support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Thu, 8 May 2014 14:10:56 +0000 (11:10 -0300)]
ARM: dts: imx6qdl-sabresd: Add USDHC4 support
USDHC4 is connected to a DDR MMC. Add support for it.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Russell King [Fri, 18 Apr 2014 10:01:27 +0000 (11:01 +0100)]
ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i
Add the HDMI DT configuration for the SolidRun HummingBoard and Cubox-i.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 7 May 2014 18:09:05 +0000 (20:09 +0200)]
ARM: dts: imx6: edmqmx6: add SPI bus and flash
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 7 May 2014 18:09:04 +0000 (20:09 +0200)]
ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 6 May 2014 16:34:19 +0000 (13:34 -0300)]
ARM: dts: imx6q-udoo: Add HDMI support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Sascha Hauer [Wed, 7 May 2014 13:19:00 +0000 (15:19 +0200)]
ARM: dts: Add stdout-path property to i.MX boards
This adds the stdout-path property to various i.MX boards. Values
of the property have been taken from barebox, so they should be
correct. Also, the older linux,stdout-path property is converted
to stdout-path.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Thu, 1 May 2014 06:34:04 +0000 (23:34 -0700)]
ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
The GW52xx supports LVDS on channel 0. Remove the obsolete crtcs node and
add display timings for the HanStar HSD100PXN1 display.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Thu, 1 May 2014 06:32:30 +0000 (23:32 -0700)]
ARM: dts: imx: add LVDS backlight for Ventana
The GW54xx/GW53xx/GW52xx all support LVDS with a PWM controlled backlight.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 30 Apr 2014 10:47:09 +0000 (12:47 +0200)]
ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie
This isn't compatible with the new binding and should be
handled via a proper regulator. It shouldn't be needed as
the driver has always ignored this property.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 30 Apr 2014 05:58:15 +0000 (13:58 +0800)]
ARM: dts: imx6: update pcie to bring in line with new binding
The new bindings drops one clock, renames the others and
drops the old interrupt mapping.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 29 Apr 2014 04:59:36 +0000 (01:59 -0300)]
ARM: dts: imx53-qsb-common: Add TVE support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:11 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Fix "reg" property for USBH2 PHY
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:10 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Add CSI enable switch
This patch adds a GPIO fixed regulator which used on RDK to
enable CSI bus.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:09 +0000 (08:52 +0400)]
ARM: dts: imx: Remove excess entries for PMIC
This patch removes excess "#address-cells" and "#size-cells" entries
for PMIC, since these entries is not used.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:08 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-som: Disable PM pins for USB OTG
USB PWR and OC pins are used as GPIOs for different purposes,
so add "disable-over-current" property for OTG node to indicate this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:07 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-som: Fix active level for FEC reset
FEC reset GPIO is active low. Fix this typo.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Apr 2014 04:52:06 +0000 (08:52 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Remove duplicate entries for USB PHY
"compatible", "#address-cells" and "#size-cells" for USB PHY are
already described in the SOM DTS. Remove these duplicate entries.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Wed, 23 Apr 2014 07:47:51 +0000 (00:47 -0700)]
ARM: dts: ventana: Add HDMI support
Configure ddc and enable HDMI
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Marek Vasut [Mon, 21 Apr 2014 20:56:49 +0000 (22:56 +0200)]
ARM: dts: imx6qdl-sabresd: Add PCIe support
Add support for the PCI express bus available on MX6 SabreSDP.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 22 Apr 2014 14:26:22 +0000 (11:26 -0300)]
ARM: dts: imx6qdl-wandboard: Add HDMI support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 22 Apr 2014 13:04:59 +0000 (10:04 -0300)]
ARM: dts: imx6qdl-sabresd: Add HDMI support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Thu, 17 Apr 2014 18:23:31 +0000 (15:23 -0300)]
ARM: dts: imx27-pdk: Add keypad support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Thu, 17 Apr 2014 18:23:30 +0000 (15:23 -0300)]
ARM: dts: imx27-pdk: Add NAND support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Wed, 16 Apr 2014 21:23:50 +0000 (23:23 +0200)]
ARM: dts: imx6q-gk802: Enable HDMI
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 17:53:20 +0000 (14:53 -0300)]
ARM: dts: imx27-pdk: Add USB OTG support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 17:53:19 +0000 (14:53 -0300)]
ARM: dts: imx27: Place the usb phy nodes in the board dts files
It is not a good approach to have the USB PHY nodes inside imx27.dtsi since
the USB PHYs on mx27 are not internal to the SoC.
Place the USB PHY nodes in the board dts files instead.
Also, each board may have a different clock source for the USB PHY, so do not
hardcode it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 17:53:18 +0000 (14:53 -0300)]
ARM: dts: imx27: Use the correct usb clock gate
USB Host1, Host2 and OTG are gated via 'usb_ipg_gate' clock, so fix it in order
to avoid the following kernel oops:
usbcore: registered new interface driver usb-storage
10024000 .usb supply vbus not found, using dummy regulator
Unhandled fault: external abort on non-linefetch (0x808) at 0xf4424184
Internal error: : 808 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted
3.15.0-rc1-26325-g971f9fd -dirty #64
task:
c7829aa0 ti:
c7836000 task.ti:
c7836000
PC is at ci_hdrc_probe+0x3a4/0x634
LR is at ci_hdrc_probe+0x100/0x634
pc : [<
c036cc78 >] lr : [<
c036c9d4 >] psr:
60000013
sp :
c7837d48 ip :
00000001 fp :
00000000
r10:
00000000 r9 :
00000000 r8 :
c791b6c0
r7 :
c7945000 r6 :
f4424000 r5 :
c7945010 r4 :
c794e010
r3 :
f4424184 r2 :
00000000 r1 :
8c000004 r0 :
0c000004
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
0005317f Table:
a0004000 DAC:
00000017
Process swapper (pid: 1, stack limit = 0xc78361c0)
Stack: (0xc7837d48 to 0xc7838000)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 16 Apr 2014 11:25:56 +0000 (08:25 -0300)]
ARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO into a separate pin group
The hardware is better described if we place the PMIC IRQ GPIO into its own
pingroup.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 15 Apr 2014 21:55:12 +0000 (18:55 -0300)]
ARM: dts: imx27-pdk: Add PMIC support
imx27-pdk has a MC13783 PMIC connected to CSPI2 port.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:57 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Use predefined constants for clock definition
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:56 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Add devicetree node for I2C1
This patch adds devicetree node and pinctrl group for I2C1.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:55 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Sort nodes by name
This patch sorts nodes by name and moves "iomux" configuration at
the bottom of file.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:54 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Add USB OTG regulator node
This patch adds a regulator node and pinctrl group for USB OTG.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:53 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Use predefined constants for keys definition
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:52 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Add missing pingroup for PMIC
This patch adds missing pin definition for PMIC IRQ GPIO.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:51 +0000 (11:24 +0400)]
ARM: dts: imx51-babbage: Move "hog" pins into corresponded pin groups
Move "hog" pins into corresponded pin groups for eSDHC1, eSDHC2,
eCSPI1, gpio-keys, regulator-fixed and codec clock.
Additionally, this patch fixes GPIO active level definition for
USB regulator.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 16 Apr 2014 07:24:50 +0000 (11:24 +0400)]
ARM: dts: i.MX51: Allow to define partitions onto NFC
This patch allow to define partitions onto NFC in user defined
devicetrees.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:32 +0000 (17:37 +0200)]
ARM: dts: pbab01: Enable DVI
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:31 +0000 (17:37 +0200)]
ARM: dts: pbab01: Enable UART1
This patch enables UART1 on the phyFLEX connector (i.MX6 uart3).
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:30 +0000 (17:37 +0200)]
ARM: dts: pfla02: Add UART1 (uart3)
The pins labeled UART1 on the module connector are wired to i.MX6 uart3.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:29 +0000 (17:37 +0200)]
ARM: dts: pbab01: Add I2C devices
This patch adds the TLV320, STMPE811, RTC8564, and MX1037 ICs to the I2C2 bus.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:28 +0000 (17:37 +0200)]
ARM: dts: pbab01: Add I2C2 and I2C3
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:27 +0000 (17:37 +0200)]
ARM: dts: pbab01: Set linux,stdout-path to UART4
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:26 +0000 (17:37 +0200)]
ARM: dts: pfla02: PHY reset is active-low
Note that the fec driver code currently hard-codes an active-low
reset, regardless of the flags in the device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:25 +0000 (17:37 +0200)]
ARM: dts: pfla02: Add GPIO LEDs
This patch enables the red and green GPIO LEDs on Phytec phyFLEX i.MX6 modules.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:24 +0000 (17:37 +0200)]
ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
The PBA-B-01 carrier board can be equipped with either Quad or DualLite/Solo
phyFLEX i.MX6 modules (PFL-A-02).
This moves all common devices into imx6qdl-phytec-pbab01.dtsi. The SoC specific
device trees then just include the pfla01 and pbab01 dtsi files corresponding
to the SoC variant.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Mon, 14 Apr 2014 15:37:23 +0000 (17:37 +0200)]
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sun, 13 Apr 2014 14:48:43 +0000 (11:48 -0300)]
ARM: dts: imx27-pdk: Pass the FEC pin configuration
Provide an entry for the FEC pin muxing.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sun, 13 Apr 2014 14:48:42 +0000 (11:48 -0300)]
ARM: dts: imx27-pdk: Pass the UART1 pin configuration
Provide an entry for the UART1 pin muxing.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sun, 13 Apr 2014 14:48:41 +0000 (11:48 -0300)]
ARM: dts: imx27-pdk: Keep the dt nodes sorted
For better readability keep the dt nodes sorted.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 12 Apr 2014 05:29:05 +0000 (09:29 +0400)]
ARM i.MX51: Add Digi ConnectCore devicetree
This patch adds support for Digi ConnectCore® i.MX51/Wi-i.MX51 SOM
and basic support for the ConnectCore for i.MX51 JumpStart Kit.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Wed, 9 Apr 2014 15:08:16 +0000 (19:08 +0400)]
ARM: dts: i.MX: Use single naming style for i.MX WEIM device
This patch converts all i.MX WEIM users to use single naming style
for devices.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Denis Carikli [Tue, 8 Apr 2014 16:22:42 +0000 (18:22 +0200)]
ARM: dts: cpuimx51 Add touchscreen support.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Denis Carikli [Tue, 8 Apr 2014 16:22:41 +0000 (18:22 +0200)]
ARM: dts: cpuimx35 Add touchscreen support.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Denis Carikli [Mon, 7 Apr 2014 16:04:00 +0000 (18:04 +0200)]
ARM: dts: mbimxsd51 baseboard: Add USB support.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Thu, 3 Apr 2014 15:47:10 +0000 (17:47 +0200)]
ARM: dts: add initial Colibri VF61 board support
Add initial Toradex Colibri VF61 board support. Ethernet, UART
and SDHC cards are working. Cache latencies need to be a bit
higher than vf610.dtsi suggests. Those values are validated
by running multiple memory tests.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Thu, 3 Apr 2014 15:47:09 +0000 (17:47 +0200)]
of: add vendor prefix for Toradex AG
Adds toradex to the list of DT vendor prefixes.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 2 Apr 2014 22:25:44 +0000 (19:25 -0300)]
ARM: dts: imx27-pdk: Pass the memory range
imx27-pdk has 128 MB of DRAM. Pass the memory range in dt.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 29 Mar 2014 06:48:25 +0000 (10:48 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Add display control signal definitions
This patch adds display control signal definitions.
These fields are not used in the driver yet, but will be used for
reference to indicate the polarity of the signals.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Michael Heimpold [Thu, 27 Mar 2014 22:51:30 +0000 (23:51 +0100)]
ARM: dts: imx28-duckbill: use symbolic names from gpio.h
Use GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW instead of 0 and 1.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Michael Heimpold [Thu, 27 Mar 2014 22:51:28 +0000 (23:51 +0100)]
ARM: dts: imx28-duckbill: fix phy reset gpio
Fix a copy & paste error: on duckbills the GPIO used for resetting
the ethernet phy differs from FSL's MX28EVK board.
Reported-by: Stefan Wahren <info@lategoodbye.de>
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Michael Heimpold [Thu, 27 Mar 2014 22:51:29 +0000 (23:51 +0100)]
ARM: dts: imx28: include gpio.h to allow use of symbolic names
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Michael Heimpold [Thu, 27 Mar 2014 22:51:27 +0000 (23:51 +0100)]
ARM: dts: imx28-duckbill: fix mmc settings
I2SE's duckbills are only equipped with a micro SD card slot and
thus only provide a 4-bit interface.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 26 Mar 2014 14:54:39 +0000 (11:54 -0300)]
ARM: dts: imx51-babbage: Add USB OTG support
Tested by pinging from the host PC to the imx51-babbage via a g_ether
connection.
Signed-off by: Dave Ebright <dave.ebright@parsons.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 26 Mar 2014 14:54:38 +0000 (11:54 -0300)]
ARM: dts: imx51-babbage: Add USB Host1 support
Signed-off by: Dave Ebright <dave.ebright@parsons.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 25 Mar 2014 17:47:41 +0000 (14:47 -0300)]
ARM: dts: imx35-pdk: Add initial device tree support
Add support for UART, eSDHC and NAND.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Xiubo Li [Mon, 24 Mar 2014 02:22:16 +0000 (10:22 +0800)]
ARM: dts: vf610-twr: Enables FTM PWM device.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Xiubo Li [Mon, 24 Mar 2014 02:22:15 +0000 (10:22 +0800)]
ARM: dts: vf610-twr: Add PWM0's pinctrl node
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Xiubo Li [Mon, 24 Mar 2014 02:22:14 +0000 (10:22 +0800)]
ARM: dts: vf610: Add Freescale FTM PWM node.
This adds devicetree node for VF610, and there are 8 channels
supported.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Wed, 19 Mar 2014 14:49:24 +0000 (15:49 +0100)]
ARM: dts: i.MX53: Add reset line to VPU device node
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Wed, 19 Mar 2014 14:49:23 +0000 (15:49 +0100)]
ARM: dts: i.MX53: Enable CODA7541 VPU
This IP module is always present and has no external connections.
There is no reason to disable it in the device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sun, 16 Mar 2014 21:09:20 +0000 (18:09 -0300)]
ARM: dts: imx25-pdk: Add USB Host1 support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 15 Mar 2014 05:22:40 +0000 (09:22 +0400)]
ARM: dts: imx27-phytec-phycore-rdk: Add display support
This patch adds FB, Sharp-LQ035Q7 display (add-on module) and
corresponded pinctrl devicetree nodes to the Phytec PCM970 RDK.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 12 Mar 2014 13:19:25 +0000 (10:19 -0300)]
ARM: dts: imx25-pdk: Add CAN support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 12 Mar 2014 13:19:24 +0000 (10:19 -0300)]
ARM: dts: imx25-pdk: Add keypad support
Tested with evtest.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 11 Mar 2014 18:55:47 +0000 (02:55 +0800)]
ARM: dts: imx25-pdk: Add audio support
mx25pdk has a sgtl5000 codec connected to the I2C1 port.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 11 Mar 2014 18:55:46 +0000 (02:55 +0800)]
ARM: mx25: Add CLKO support
CLKO support is a clock output on mx25 which can output many of the internal
clock sources. It is useful for debugging purpose or also for driving the
audio codec for example.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Tue, 13 May 2014 16:04:22 +0000 (20:04 +0400)]
ARM: i.MX1 clk: Remove clk_register_clkdev() for unused clocks
This patch removes clk_register_clkdev() for the clocks that do not
have any users from boards and drivers.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Tue, 13 May 2014 16:04:21 +0000 (20:04 +0400)]
ARM: i.MX1 clk: Add missing clocks
This patch adds missing clocks for mpll_gate, spll_gate, uart3_gate,
ssi2_gate and brom_gate. As an additional this fixes incorrect bit
position for dma_gate clock.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shawn Guo [Tue, 13 May 2014 13:46:16 +0000 (21:46 +0800)]
ARM: imx: add basic imx6sx SoC support
Add basic suppport for i.MX6 SoloX SoC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Anson Huang [Sun, 11 May 2014 14:47:09 +0000 (22:47 +0800)]
ARM: imx: add clock driver for imx6sx
Add clock driver for i.MX6 SoloX SoC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shawn Guo [Sun, 11 May 2014 13:53:48 +0000 (21:53 +0800)]
ARM: imx: add low-level debug support for imx6sx
Enable low-level debug support for i.MX6 SoloX by adding the debug
port definitions for the SoC.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Sat, 10 May 2014 15:47:36 +0000 (12:47 -0300)]
ARM: mx51: Remove mach-cpuimx51sd board file
eukrea_mbimxsd51-baseboard.c and mach-cpuimx51sd.c can be replaced with their
devicetree equivalents: imx51-eukrea-mbimxsd51-baseboard.dts and
imx51-eukrea-cpuimx51.dtsi respectively, so remove the board files.
This allows the conversion of mx51 to a devicetree-only platform.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sun, 11 May 2014 07:35:57 +0000 (11:35 +0400)]
ARM: i.MX: Setup IRQ handler from IRQ driver
This patch moves IRQ handler setup to the its corresponded IRQ
driver (AVIC, TZIC).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Juan Solano [Wed, 7 May 2014 15:09:59 +0000 (17:09 +0200)]
ARM: i.MX27 pca100: remove deprecated IRQF_DISABLED
This flag is a NOOP and can be removed now.
Signed-off-by: Juan Solano <jsm@jsolano.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Brian Norris [Thu, 1 May 2014 06:26:36 +0000 (23:26 -0700)]
ARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
These defconfigs contain the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>