Randy Dunlap [Sun, 19 Aug 2012 00:44:14 +0000 (17:44 -0700)]
regulator: fix kernel-doc warnings in drivers/regulator/core.c
Fix regulator kernel-doc warnings:
Warning(drivers/regulator/core.c:2308): No description found for parameter 'rdev'
Warning(drivers/regulator/core.c:2308): Excess function parameter 'regulator' description in 'regulator_set_voltage_time_sel'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Randy Dunlap [Sun, 19 Aug 2012 00:44:14 +0000 (17:44 -0700)]
regulator: fix kernel-doc warnings in drivers/regulator/core.c
Fix regulator kernel-doc warnings:
Warning(drivers/regulator/core.c:2308): No description found for parameter 'rdev'
Warning(drivers/regulator/core.c:2308): Excess function parameter 'regulator' description in 'regulator_set_voltage_time_sel'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Walleij [Mon, 20 Aug 2012 16:41:35 +0000 (18:41 +0200)]
regulator: ab8500: provide per-regulator shift
This encodes the voltage shifts (the number of bits to shift
the register to get to the selector) into the regulator info.
We have several new variants of the AB8500 so this varies a
lot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Warren [Mon, 20 Aug 2012 15:39:10 +0000 (09:39 -0600)]
regulator: max8907: fix compile error when !CONFIG_OF
Fix the following:
CC [M] drivers/regulator/max8907-regulator.o
drivers/regulator/max8907-regulator.c: In function 'max8907_regulator_probe':
drivers/regulator/max8907-regulator.c:297:12: error: 'max8907_matches' undeclared (first use in this function)
by removing direct references to max8907_matches[], which only exists when
CONFIG_OF is defined.
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Sat, 18 Aug 2012 06:33:05 +0000 (14:33 +0800)]
regulator: max8907: Properly set pmic pointer in max8907_regulator_remove()
Add missing platform_get_drvdata() call in max8907_regulator_remove(), this
fixes below build warning:
CC [M] drivers/regulator/max8907-regulator.o
drivers/regulator/max8907-regulator.c: In function 'max8907_regulator_remove':
drivers/regulator/max8907-regulator.c:353:23: warning: 'pmic' is used uninitialized in this function [-Wuninitialized]
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Thu, 16 Aug 2012 04:26:02 +0000 (12:26 +0800)]
regulator: max8907: Fix n_voltages for MAX8907B SD1
For linear voltage mapping, the n_voltages is (max - min) / step + 1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Stephen Rothwell [Thu, 16 Aug 2012 05:16:05 +0000 (15:16 +1000)]
regulator: using kfree() requires including slab.h
Fixes this build error:
drivers/regulator/twl-regulator.c: In function 'twlreg_probe':
drivers/regulator/twl-regulator.c:1229:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
Also added string.h for kmemdup().
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Gyungoh Yoo [Thu, 9 Aug 2012 20:24:34 +0000 (14:24 -0600)]
regulator: add MAX8907 driver
The MAX8907 is an I2C-based power-management IC containing voltage
regulators, a reset controller, a real-time clock, and a touch-screen
controller.
The original driver was written by:
* Gyungoh Yoo <jack.yoo@maxim-ic.com>
Various fixes and enhancements by:
* Jin Park <jinyoungp@nvidia.com>
* Tom Cherry <tcherry@nvidia.com>
* Prashant Gaikwad <pgaikwad@nvidia.com>
* Dan Willemsen <dwillemsen@nvidia.com>
* Laxman Dewangan <ldewangan@nvidia.com>
During upstreaming, I (swarren):
* Converted to regmap.
* Allowed probing from device tree.
* Reworked the regulator driver to be represented as a single device that
provides multiple regulators, rather than as a device per regulator.
* Replaced many regulator ops with standard functions.
* Added ability to specify supplies for each regulator.
* Removed the WLED regulator. If/when we expose this in the driver, it
should be a backlight object not a regulator object.
* Renamed from max8907c->max8907, since the driver covers at least the
C and B revisions.
* General cleanup.
Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Arnd Bergmann [Tue, 14 Aug 2012 12:41:50 +0000 (12:41 +0000)]
regulator: twl: make twl_info tables const
I currently carry the series to make of_device_id->data const in the
arm-soc tree, which fixes a number of issues, but leaves one new
compiler warning about the twl-regulator driver:
drivers/regulator/twl-regulator.c: In function 'twlreg_probe':
drivers/regulator/twl-regulator.c:1130:8: warning: assignment discards 'const'
qualifier from pointer target type [enabled by default]
drivers/regulator/twl-regulator.c:1139:9: warning: assignment discards 'const'
qualifier from pointer target type [enabled by default]
The warning indicates that the driver takes a static table with
initialization data for each regulator, modifies the data in place
and passes a pointer to that structure to the regulator_register
function. This is probably ok because a system contains only one
instance of each regulator, but it's still bad style because any
driver should be written to support multiple instances of the same
hardware.
This patch changes the code to dynamically allocate the memory
we pass to the regulator core so the table can be constant.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Aaro Koskinen [Tue, 14 Aug 2012 22:10:04 +0000 (01:10 +0300)]
regulator: twl-regulator: fix up VINTANA1/VINTANA2
It seems commit 2098e95ce9bb039ff2e7bf836df358d18a176139 (regulator: twl:
adapt twl-regulator driver to dt) accidentally deleted VINTANA1. Also
the same commit defines VINTANA2 twice with TWL4030_ADJUSTABLE_LDO and
TWL4030_FIXED_LDO. This patch changes the fixed one to be VINTANA1.
I noticed this when auditing my N900 boot logs. I could not notice any
change in device behaviour, though, except that the boot logs are now
like before:
...
[ 0.282928] VDAC: 1800 mV normal standby
[ 0.284027] VCSI: 1800 mV normal standby
[ 0.285400] VINTANA1: 1500 mV normal standby
[ 0.286865] VINTANA2: 2750 mV normal standby
[ 0.288208] VINTDIG: 1500 mV normal standby
[ 0.289978] VSDI_CSI: 1800 mV normal standby
...
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
Laxman Dewangan [Sun, 5 Aug 2012 07:41:58 +0000 (13:11 +0530)]
regulator: tps6586x: add support for SYS rail
Device have SYS rail which is always ON. It is system
power bus. LDO5 and LDO_RTC get powered through this rail
internally. Add support for this rail and make the
LDO5/LDO_RTC input supply to "sys".
Update document accordingly.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
regulator: core: request only valid gpio pins for regulator enable
Commit 65f735082de3 ("regulator: core: Add core support for GPIO controlled
enable lines") introduced enable gpio entry in regulator configuration
structure. Some drivers use '-1' as a placeholder for marking that such
gpio line is not available, because '0' is considered as a valid gpio
number. This patch fixes initialization of such drivers (like MAX8952
on UniversalC210 board), when '-1' is provided as enable gpio pin in the
regulator's platform data.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 9 Aug 2012 15:42:19 +0000 (16:42 +0100)]
regulator: core: Use list_voltage() to read single voltage regulators
If the regulator doesn't supply a way of reading back the voltage but does
provide a list_voltage() operation then use that with a selector of zero
to read the voltage. Regulators doing this means that we have the list
operation there for consumers that want to configure themselves.
Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Shawn Guo [Sun, 5 Aug 2012 15:05:20 +0000 (23:05 +0800)]
regulator: add a new API regulator_set_voltage_tol()
There are some use cases where a voltage range could be reasonably
specified by a target voltage and tolerance. Add a new API
regulator_set_voltage_tol() wrapping regulator_set_voltage() call
to ease the users.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Heiko Stübner [Tue, 7 Aug 2012 22:50:19 +0000 (00:50 +0200)]
regulator: gpio-regulator: Split setting of voltages and currents
Originally gpio-regulator used the first item of its state list
that matched the given voltage or current range.
Commit 4dbd8f63f0 (regulator: gpio-regulator: Set the smallest voltage/current
in the specified range) changed this, to make the selection independent of
the ordering of the state list.
But selecting the minimal value is only true for voltage regulators.
For current regulators the maximum in the given range should be
selected instead.
Therefore split the previous common selection function into specific
functions for voltage and current regulators.
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
missed to add the voltage table to the buck. Fix this and
it works like a charm.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Mon, 16 Jul 2012 16:10:42 +0000 (00:10 +0800)]
regulator: anatop: Fix wrong mask used in anatop_get_voltage_sel
The mask used in anatop_get_voltage_sel does not match the mask used in
anatop_set_voltage_sel.
We need to do left shift anatop_reg->vol_bit_shift bits for the correct mask.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
regulator: tps6586x: correct vin pin for sm0/sm1/sm2
As per datasheet, the vin pin for the regulator is named
as vin_sm0, vin_sm1, vin_sm2 for sm0, sm1 and sm2 respectively.
Correcting the names in driver and documentation to match with
datasheet.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reported-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1. If reading PALMAS_SMPS_CTRL fails, simply returns ret rather than goto
err_unregister_regulator because we have not call regulator_register().
2. If palmas_ldo_init() fails, we need to call regulator_unregister() for the
regulator we just successfully registered in this for loop iteration.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Wed, 18 Jul 2012 04:30:11 +0000 (12:30 +0800)]
regulator: palmas: Fix calculating selector in palmas_map_voltage_ldo
This patch fixes below issues when choosing selector:
1. Current code returns negative selector if min_uV < 900000 which is wrong.
For example, it is possible to satisfy the request with selector = 1 if
the requested min_uV is 850000.
2. Current code may select a voltage lower than requested min_uV.
For example, if the requested min_uV is 945000, current code chooses
selector = 1 which is lower than requested min_uV.
DIV_ROUND_UP to avoid this case.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Mon, 6 Aug 2012 15:44:19 +0000 (23:44 +0800)]
regulator: core: Fix cast to pointer from integer of different size warning
This is to address the following warning during compilation time: (Compile on x86_64)
CC drivers/regulator/core.o
drivers/regulator/core.c: In function '_regulator_do_set_voltage':
drivers/regulator/core.c:2183:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
This patch adds a temporary variable to avoid double cast.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 7 Aug 2012 14:21:23 +0000 (22:21 +0800)]
regulator: ab8500: Set enable enable_time in regulator_desc
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Sun, 5 Aug 2012 19:28:49 +0000 (22:28 +0300)]
Merge branches 'timers-urgent-for-linus' and 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and perf fixes from Ingo Molnar:
"Timers:
- Fix another timekeeping bug
Pef:
- Make clean brace expansion fix for some shells, from Palmer Cox
- Warn user just once per guest kernel when not finding kernel info,
from David Ahern
- perf test fix from Jiri Olsa
- Fix error handling on event creation in perf top, from David Ahern
- Fix check on perf_target__strnerror, from Namhyung Kim
- Save the whole cmdline, from David Ahern
There's this infrastructure change:
- Prep work for the DWARF CFI post unwinder, so that it doesn't use
perf_session in lots of places, just evlist/evsel is enough.
which is a late infrastructure change that prepare for future feature
work - we wanted it upstream to simplify the fixes/development patch
flows."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix adjustment cleanup bug in timekeeping_adjust()
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Remove brace expansion from clean target
perf kvm top: Limit guest kernel info message to once
perf tools: Introduce intlist
perf tools: Change strlist to use the new rblist
perf tools: Introducing rblist
perf kvm: Use strtol for walking guestmount directory
perf tool: Save cmdline from user in file header vs what is passed to record
perf top: Error handling for counter creation should parallel perf-record
perf session: Remove no longer used synthesize_sample method
perf evsel: Adopt parse_sample method from perf_event
perf evlist: Introduce perf_evlist__parse_sample
perf session: Use perf_evlist__id_hdr_size more extensively
perf session: Use perf_evlist__sample_id_all more extensively
perf session: Use perf_evlist__sample_type more extensively
perf evsel: Precalculate the sample size
perf target: Fix check on buffer size
perf symbols: Fix array sizes for binary types arrays
perf test: Fix parse events automated tests
Ingo Molnar [Sat, 4 Aug 2012 19:21:14 +0000 (21:21 +0200)]
time: Fix adjustment cleanup bug in timekeeping_adjust()
Tetsuo Handa reported that sporadically the system clock starts
counting up too quickly which is enough to confuse the hangcheck
timer to print a bogus stall warning.
Linus Torvalds [Sat, 4 Aug 2012 15:32:46 +0000 (08:32 -0700)]
Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS fixes and cleanups from Al Viro.
Most of this is the series to remove sync_supers() and the
->write_supers VFS callback from Artem Bityutskiy. One commit to do the
actual removal work, a whole series of commits to fix up stale comments
etc all over the tree.
There's also a regression fix for an incorrect use of mnt_drop_write()
in do_dentry_open().
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
missed mnt_drop_write() in do_dentry_open()
UBIFS: nuke pdflush from comments
gfs2: nuke pdflush from comments
drbd: nuke pdflush from comments
nilfs2: nuke write_super from comments
hfs: nuke write_super from comments
vfs: nuke pdflush from comments
jbd/jbd2: nuke write_super from comments
btrfs: nuke pdflush from comments
btrfs: nuke write_super from comments
ext4: nuke pdflush from comments
ext4: nuke write_super from comments
ext3: nuke write_super from comments
Documentation: fix the VM knobs descritpion WRT pdflush
Documentation: get rid of write_super
vfs: kill write_super and sync_supers
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from various jbd and jbd2.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from ext3.
Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The mask and shift can be easily calculated by:
mask = 1 << BUCK_ID
shift = BUCK_ID
This patch defines BUCK_FPWM_MASK and BUCK_FPWM_SHIFT macros to replace
buck_pmap mapping table.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 20 Jul 2012 14:22:20 +0000 (22:22 +0800)]
regulator: lp8788-buck: Remove lp8788_set_default_dvs_ctrl_mode function
We already know the mask in lp8788_init_dvs() function, and we can update
the corresponding bit for default_dvs_mode in lp8788_init_dvs() function.
This function looks not necessary to me.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 20 Jul 2012 12:31:19 +0000 (20:31 +0800)]
regulator: lp8788-ldo: Set n_voltages to 1 for fixed voltage
For fixed voltage, the n_voltages should be 1 rather than 0.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Thu, 19 Jul 2012 07:10:31 +0000 (15:10 +0800)]
regulator: mc13892: Simplify implementation of mc13892_sw_regulator_set_voltage_sel()
Use mc13xxx_reg_rmw rather than a mc13xxx_reg_read and a mc13xxx_reg_write calls.
This logic to set MC13892_SWITCHERS0_SWxHI bit is pretty simple:
if (volt > 1375000)
set MC13892_SWITCHERS0_SWxHI bit
else if (volt < 1100000)
clear MC13892_SWITCHERS0_SWxHI bit
else
leave MC13892_SWITCHERS0_SWxHI bit untouched
We already know the selector, so we don't need to calculate the selector again.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Sat, 14 Jul 2012 05:37:13 +0000 (13:37 +0800)]
regulator: twl: Fix checking voltage range in twl6030smps_set_voltage()
The voltage selection logic is supposed to find the samllest voltage falls
within specified range. When using equation to calculate vsel, we need to
ensure the requested min_uV meet the range of using the equation.
Otherwise we may select a voltage that is out of specified range.
For example, in the case vsel = 62 means select voltage of 2100000uV.
What we want is to ensure the requested min_uV <= 2100000 rather than checking
max_uV >= 2100000. And this also means in the case min_uV > 2100000, vsel = 62
does not meet the request.
Also calling twl6030smps_list_voltage() for all cases to ensure the selected
voltage still in bounds.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from various pieces of the kernel documentation.
Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Finally we can kill the 'sync_supers' kernel thread along with the
'->write_super()' superblock operation because all the users are gone.
Now every file-system is supposed to self-manage own superblock and
its dirty state.
The nice thing about killing this thread is that it improves power management.
Indeed, 'sync_supers' is a source of monotonic system wake-ups - it woke up
every 5 seconds no matter what - even if there were no dirty superblocks and
even if there were no file-systems using this service (e.g., btrfs and
journalled ext4 do not need it). So it was wasting power most of the time. And
because the thread was in the core of the kernel, all systems had to have it.
So I am quite happy to make it go away.
Interestingly, this thread is a left-over from the pdflush kernel thread which
was a self-forking kernel thread responsible for all the write-back in old
Linux kernels. It was turned into per-block device BDI threads, and
'sync_supers' was a left-over. Thus, R.I.P, pdflush as well.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Fri, 3 Aug 2012 21:10:00 +0000 (14:10 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI and power management fixes from Len Brown:
"A 3.3 sleep regression fixed, numa bugfix, plus some minor cleanups"
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
ACPI processor: Fix tick_broadcast_mask online/offline regression
ACPI: Only count valid srat memory structures
ACPI: Untangle a return statement for better readability
ACPI / PCI: Do not try to acquire _OSC control if that is hopeless
ACPI: delete _GTS/_BFS support
ACPI/x86: revert 'x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler'
ACPI: replace strlen("string") with sizeof("string") -1
ACPI / PM: Fix build warning in sleep.c for CONFIG_ACPI_SLEEP unset
Linus Torvalds [Fri, 3 Aug 2012 20:24:07 +0000 (13:24 -0700)]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
Pull exofs update from Boaz Harrosh:
"They are all mostly fixes, except the most important patch by Artem
Bityutskiy which removes the use of s_dirt. After this patch s_dirt
can be completely removed from the tree."
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
ore: Fix out-of-bounds access in _ios_obj()
exofs: Use proper max_IO calculations from ore
exofs: Fix __r4w_get_page when offset is beyond i_size
exofs: stop using s_dirt
exofs: readpage_strip: Add a BUG_ON to check for PageLocked(page)
Linus Torvalds [Fri, 3 Aug 2012 18:21:29 +0000 (11:21 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM bug fixes from Marcelo Tosatti:
- Fix DS/ES segment register corruption on x86_32.
- Fix kvmclock wallclock migration offset.
- Fix PIT interrupt ACK vs system reset logic bug.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Fix ds/es corruption on i386 with preemption
KVM: x86: apply kvmclock offset to guest wall clock time
KVM: PIC: call ack notifiers for irqs that are dropped form irr
Linus Torvalds [Fri, 3 Aug 2012 18:20:19 +0000 (11:20 -0700)]
Merge tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes for ASoC, mainly against regressions due to the
defaulting regmap i/o, in addition to a HD-audio fixup."
* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: core: Fix check before defaulting to regmap
ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC
ASoC: wm8962: Allow VMID time to fully ramp
ASoC: AC97 doesn't use regmap by default
ASoC: sgtl5000: enable VAG_POWER for LINE_IN
ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements
ASoC: omap: Add missing modules aliases to get sound working on omap devices
sound: tegra_alc5632: Adjust to of_get_named_gpio() change
sound: tegra_wm8903: Adjust to of_get_named_gpio() change
ASoC: mc13783: Provide codec->control_data
ASoC: ux500: Include the correct header files
ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQs
ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe
ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work
ASoC: mxs-saif: fix clock prepare and enable unbalance issue
ASoC: wm8994: Ensure there are enough BCLKs for four channels
Linus Torvalds [Fri, 3 Aug 2012 18:00:26 +0000 (11:00 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fixes from Ingo Molnar:
"A couple of futex fixes from Darren Hart: two bugs reported by Dave
Jones (found with his trinity test) and Dan Carpenter through static
analysis. The third found while debugging the first two."
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi()
futex: Fix bug in WARN_ON for NULL q.pi_state
futex: Test for pi_mutex on fault in futex_wait_requeue_pi()
Linus Torvalds [Fri, 3 Aug 2012 17:59:36 +0000 (10:59 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Various fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, kcmp: The kcmp system call can be common
arch/x86/kernel/kdebugfs.c: Ensure a consistent return value in error case
x86/mce: Add quirk for instruction recovery on Sandy Bridge processors
x86/mce: Move MCACOD defines from mce-severity.c to <asm/mce.h>
x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs
x86, nops: Missing break resulting in incorrect selection on Intel
x86: CONFIG_CC_STACKPROTECTOR=y is no longer experimental
Linus Torvalds [Fri, 3 Aug 2012 17:58:57 +0000 (10:58 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"One regression fix, and a couple of cleanups that clean up the code
flow in areas that had high-profile bugs recently."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Remove all direct references to timekeeper
time: Clean up offs_real/wall_to_mono and offs_boot/total_sleep_time updates
time: Clean up stray newlines
time/jiffies: Rename ACTHZ to SHIFTED_HZ
time/jiffies: Allow CLOCK_TICK_RATE to be undefined
time: Fix casting issue in tk_set_xtime and tk_xtime_add
Linus Torvalds [Fri, 3 Aug 2012 17:58:13 +0000 (10:58 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fixes and two late cleanups"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cleanups: Add load balance cpumask pointer to 'struct lb_env'
sched: Fix comment about PREEMPT_ACTIVE bit location
sched: Fix minor code style issues
sched: Use task_rq_unlock() in __sched_setscheduler()
sched/numa: Add SD_PERFER_SIBLING to CPU domain
Linus Torvalds [Fri, 3 Aug 2012 17:57:20 +0000 (10:57 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Fix merge window fallout and fix sleep profiling (this was always
broken, so it's not a fix for the merge window - we can skip this one
from the head of the tree)."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/trace: Add ability to set a target task for events
perf/x86: Fix USER/KERNEL tagging of samples properly
perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit
Linus Torvalds [Fri, 3 Aug 2012 17:53:47 +0000 (10:53 -0700)]
Merge tag 'for_linux-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull KGDB/KDB/usb-dbgp fixes and cleanups from Jason Wessel:
"There are no new features, those will be delayed to the 3.7 window.
There are only fixes/cleanup against the usual kernel churn and we are
removing more lines than we add:
- usb-dbgp - increase the controller wait time to come out of halt.
- kdb - Remove unused KDB_FLAG_ONLY_DO_DUMP code and cpu in more prompt
- debug core - pass NMI type on archs that provide NMI types"
* tag 'for_linux-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
USB: echi-dbgp: increase the controller wait time to come out of halt.
kernel/debug: Make use of KGDB_REASON_NMI
kdb: Remove cpu from the more prompt
kdb: Remove unused KDB_FLAG_ONLY_DO_DUMP
Linus Torvalds [Fri, 3 Aug 2012 17:52:41 +0000 (10:52 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
m68k/apollo: Rename "timer" to "apollo_timer"
zorro: Remove unused zorro_bus.devices
m68k: Remove never used asm/shm.h
m68k/sun3: Remove unselectable code in prom_init()
m68k: Use asm-generic version of <asm/sections.h>
m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
mtd/uclinux: Use generic __bss_stop instead of _ebss
m68knommu: Allow ColdFire CPUs to use unaligned accesses
m68k: Remove five unused headers
m68k: CPU32 does not support unaligned accesses
m68k: Introduce config option CPU_HAS_NO_UNALIGNED
m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
m68k: Move CPU_HAS_* config options
m68k: Remove duplicate FPU config option
m68knommu: Clean up printing of sections
m68k: Use asm-generic version of <asm/types.h>
m68k: Use Kbuild logic to import asm-generic headers
perf tools: Remove brace expansion from clean target
The clean target uses brace expansion to remove some generated files. However,
the default shells on many systems do not support this feature resulting in
some generated files not being removed by clean.
Signed-off-by: Palmer Cox <p@lmercox.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1343598883-17907-1-git-send-email-p@lmercox.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / karo-tx-linux.git / log