[PATCH] cpufreq_conservative/ondemand: invert meaning of 'ignore nice'
The use of the 'ignore_nice' sysfs file is confusing to anyone using it.
This removes the sysfs file 'ignore_nice' and in its place creates a
'ignore_nice_load' entry that defaults to '0'; meaning nice'd processes
_are_ counted towards the 'business' calculation.
WARNING: this obvious breaks any userland tools that expected ignore_nice'
to exist, to draw attention to this fact it was concluded on the mailing
list that the entry should be removed altogether so the userland app breaks
and so the author can build simple to detect workaround. Having said that
it seems currently very few tools even make use of this functionality; all
I could find was a Gentoo Wiki entry.
Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
Langsdorf, Mark [Tue, 29 Nov 2005 20:18:03 +0000 (14:18 -0600)]
[PATCH] Support 100 MHz frequency transitions
Future versions of the Opteron processor may support
frequency transitions of 100 MHz, instead of the=20
current 200 MHz. This patch enables the powernow-k8
driver to transition to an odd FID code, indicating
a multiple of 100 MHz frequency.
Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com>
Andrea Arcangeli [Mon, 28 Nov 2005 21:44:15 +0000 (13:44 -0800)]
[PATCH] shrinker->nr = LONG_MAX means deadlock for icache
With Andrew Morton <akpm@osdl.org>
The slab scanning code tries to balance the scanning rate of slabs versus the
scanning rate of LRU pages. To do this, it retains state concerning how many
slabs have been scanned - if a particular slab shrinker didn't scan enough
objects, we remember that for next time, and scan more objects on the next
pass.
The problem with this is that with (say) a huge number of GFP_NOIO
direct-reclaim attempts, the number of objects which are to be scanned when we
finally get a GFP_KERNEL request can be huge. Because some shrinker handlers
just bail out if !__GFP_FS.
So the patch clamps the number of objects-to-be-scanned to 2* the total number
of objects in the slab cache.
Signed-off-by: Andrea Arcangeli <andrea@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 28 Nov 2005 21:44:13 +0000 (13:44 -0800)]
[PATCH] md: fix --re-add for raid1 and raid6
If you have an array with a write-intent-bitmap, and you remove a device, then
re-add it, a full recovery isn't needed. We detect a re-add by looking at
saved_raid_disk. For raid1, it doesn't matter which disk it was, only whether
or not it was an active device. The old code being removed set a value of
'mirror' which was then ignored, so it can go. The changed code performs the
correct check.
For raid6, if there are two missing devices, make sure we chose the right slot
on --re-add rather than always the first slot.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 28 Nov 2005 21:44:12 +0000 (13:44 -0800)]
[PATCH] md: set default_bitmap_offset properly in set_array_info
If an array is created using set_array_info, default_bitmap_offset isn't set
properly meaning that an internal bitmap cannot be hot-added until the array
is stopped and re-assembled.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 28 Nov 2005 21:44:11 +0000 (13:44 -0800)]
[PATCH] md: fix problem with raid6 intent bitmap
When doing a recovery, we need to know whether the array will still be
degraded after the recovery has finished, so we can know whether bits can be
clearred yet or not. This patch performs the required check.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NeilBrown [Mon, 28 Nov 2005 21:44:09 +0000 (13:44 -0800)]
[PATCH] md: improve read speed to raid10 arrays using 'far copies'
raid10 has two different layouts. One uses near-copies (so multiple
copies of a block are at the same or similar offsets of different
devices) and the other uses far-copies (so multiple copies of a block
are stored a greatly different offsets on different devices). The point
of far-copies is that it allows the first section (normally first half)
to be layed out in normal raid0 style, and thus provide raid0 sequential
read performance.
Unfortunately, the read balancing in raid10 makes some poor decisions
for far-copies arrays and you don't get the desired performance. So
turn off that bad bit of read_balance for far-copies arrays.
With this patch, read speed of an 'f2' array is comparable with a raid0
with the same number of devices, though write speed is ofcourse still
very slow.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rik van Riel [Mon, 28 Nov 2005 21:44:07 +0000 (13:44 -0800)]
[PATCH] temporarily disable swap token on memory pressure
Some users (hi Zwane) have seen a problem when running a workload that
eats nearly all of physical memory - th system does an OOM kill, even
when there is still a lot of swap free.
The problem appears to be a very big task that is holding the swap
token, and the VM has a very hard time finding any other page in the
system that is swappable.
Instead of ignoring the swap token when sc->priority reaches 0, we could
simply take the swap token away from the memory hog and make sure we
don't give it back to the memory hog for a few seconds.
This patch resolves the problem Zwane ran into.
Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Mon, 28 Nov 2005 21:44:05 +0000 (13:44 -0800)]
[PATCH] cpuset fork locking fix
Move the cpuset_fork() call below the write_unlock_irq call in
kernel/fork.c copy_process().
Since the cpuset-dual-semaphore-locking-overhaul.patch, the cpuset_fork()
routine acquires task_lock(), so cannot be called while holding the
tasklist_lock for write.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now when pages_low is reached, we want to kick asynch reclaim, which gives us
an interval of "b" before we must start synch reclaim, and gives kswapd an
interval of "a" before it need go back to sleep.
When pages_min is reached, normal allocators must enter synch reclaim, but
PF_MEMALLOC, ALLOC_HARDER, and ALLOC_HIGH (ie. atomic allocations, recursive
allocations, etc.) get access to varying amounts of the reserve "c".
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] ext3: Wrong return value for EXT3_IOC_GROUP_ADD
This patch corrects the return value for the EXT3_IOC_GROUP_ADD in case it
fails due to the presence of multiple resizers at the filesystem.
The problem is a little bit more serious than a wrong return value in this
case, since the clause err=0 in the exit_journal path will lead to a call
to update_backups which in turns causes a NULL pointer dereference.
Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hirokazu Takata [Mon, 28 Nov 2005 21:43:58 +0000 (13:43 -0800)]
[PATCH] m32r: Fix sys_tas() syscall
This patch fixes a deadlock problem of the m32r SMP kernel.
In the m32r kernel, sys_tas() system call is provided as a test-and-set
function for userspace, for backward compatibility.
In some multi-threading application program, deadlocks were rarely caused
at sys_tas() funcion. Such a deadlock was caused due to a collision of
__pthread_lock() and __pthread_unlock() operations.
The "tas" syscall is repeatedly called by pthread_mutex_lock() to get a
lock, while a lock variable's value is not 0. On the other hand,
pthead_mutex_unlock() sets the lock variable to 0 for unlocking.
In the previous implementation of sys_tas() routine, there was a
possibility that a unlock operation was ignored in the following case:
- Assume a lock variable (*addr) was equal to 1 before sys_tas() execution.
- __pthread_unlock() operation is executed by the other processor
and the lock variable (*addr) is set to 0, between a read operation
("oldval = *addr;") and the following write operation ("*addr = 1;")
during a execution of sys_tas().
In this case, the following write operation ("*addr = 1;") overwrites the
__pthread_unlock() result, and sys_tas() fails to get a lock in the next
turn and after that.
According to the attatched patch, sys_tas() returns 0 value in the next
turn and deadlocks never happen.
Ben Collins [Mon, 28 Nov 2005 21:43:56 +0000 (13:43 -0800)]
[PATCH] Fix hardcoded cpu=0 in workqueue for per_cpu_ptr() calls
Tracked this down on an Ultra Enterprise 3000. It's a 6-way machine. Odd
thing about this machine (and it's good for finding bugs like this) is that
the CPU id's are not 0 based. For instance, on my machine the CPU's are
6/7/10/11/14/15.
This caused some NULL pointer dereference in kernel/workqueue.c because for
single_threaded workqueue's, it hardcoded the cpu to 0.
I changed the 0's to any_online_cpu(cpu_online_mask), which cpumask.h
claims is "First cpu in mask". So this fits the same usage.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Drokin [Mon, 28 Nov 2005 21:43:53 +0000 (13:43 -0800)]
[PATCH] reiserfs: fix 32-bit overflow in map_block_for_writepage()
I now see another overflow in reiserfs that should lead to data corruptions
with files that are bigger than 4G under certain circumstances when using
mmap.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove bogus usage of test/set_bit() from fbcon rotation code and just
manipulate the bits directly. This fixes an oops on powerpc among others
and should be faster. Seems to work fine on the G5 here.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Mon, 28 Nov 2005 21:43:47 +0000 (13:43 -0800)]
[PATCH] memory_sysdev_class is static
So don't define it as extern in the header file.
drivers/base/memory.c:28: error: static declaration of 'memory_sysdev_class' follows non-static declaration
include/linux/memory.h:88: error: previous declaration of 'memory_sysdev_class' was here
Ashok Raj [Mon, 28 Nov 2005 21:43:46 +0000 (13:43 -0800)]
[PATCH] clean up lock_cpu_hotplug() in cpufreq
There are some callers in cpufreq hotplug notify path that the lowest
function calls lock_cpu_hotplug(). The lock is already held during
cpu_up() and cpu_down() calls when the notify calls are broadcast to
registered clients.
Ideally if possible, we could disable_preempt() at the highest caller and
make sure we dont sleep in the path down in cpufreq->driver_target() calls
but the calls are so intertwined and cumbersome to cleanup.
Hence we consistently use lock_cpu_hotplug() and unlock_cpu_hotplug() in
all places.
- Removed export of cpucontrol semaphore and made it static.
- removed explicit uses of up/down with lock_cpu_hotplug()
so we can keep track of the the callers in same thread context and
just keep refcounts without calling a down() that causes a deadlock.
- Removed current_in_hotplug() uses
- Removed PF_HOTPLUG_CPU in sched.h introduced for the current_in_hotplug()
temporary workaround.
Tested with insmod of cpufreq_stat.ko, and logical online/offline
to make sure we dont have any hang situations.
Signed-off-by: Ashok Raj <ashok.raj@intel.com> Cc: Zwane Mwaikambo <zwane@linuxpower.ca> Cc: Shaohua Li <shaohua.li@intel.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Stern [Mon, 28 Nov 2005 21:43:44 +0000 (13:43 -0800)]
[PATCH] Workaround for gcc 2.96 (undefined references)
LD .tmp_vmlinux1
mm/built-in.o(.text+0x100d6): In function `copy_page_range':
: undefined reference to `__pud_alloc'
mm/built-in.o(.text+0x1010b): In function `copy_page_range':
: undefined reference to `__pmd_alloc'
mm/built-in.o(.text+0x11ef4): In function `__handle_mm_fault':
: undefined reference to `__pud_alloc'
fs/built-in.o(.text+0xc930): In function `install_arg_page':
: undefined reference to `__pud_alloc'
make: *** [.tmp_vmlinux1] Error 1
Those missing references in mm/memory.c arise from this code in
include/linux/mm.h, combined with the fact that __PGTABLE_PMD_FOLDED and
__PGTABLE_PUD_FOLDED are both set and __ARCH_HAS_4LEVEL_HACK is not:
/*
* The following ifdef needed to get the 4level-fixup.h header to work.
* Remove it when 4level-fixup.h has been removed.
*/
#if defined(CONFIG_MMU) && !defined(__ARCH_HAS_4LEVEL_HACK)
static inline pud_t *pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
{
return (unlikely(pgd_none(*pgd)) && __pud_alloc(mm, pgd, address))?
NULL: pud_offset(pgd, address);
}
With my configuration the pgd_none and pud_none routines are inlines
returning a constant 0. Apparently the old compiler avoids generating
calls to __pud_alloc and __pmd_alloc but still lists them as undefined
references in the module's symbol table.
I don't know which change caused this problem. I think it was added
somewhere between 2.6.14 and 2.6.15-rc1, because I remember building
several 2.6.14-rc kernels without difficulty. However I can't point to an
individual culprit.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Mon, 28 Nov 2005 22:34:23 +0000 (14:34 -0800)]
mm: re-architect the VM_UNPAGED logic
This replaces the (in my opinion horrible) VM_UNMAPPED logic with very
explicit support for a "remapped page range" aka VM_PFNMAP. It allows a
VM area to contain an arbitrary range of page table entries that the VM
never touches, and never considers to be normal pages.
Any user of "remap_pfn_range()" automatically gets this new
functionality, and doesn't even have to mark the pages reserved or
indeed mark them any other way. It just works. As a side effect, doing
mmap() on /dev/mem works for arbitrary ranges.
Trond Myklebust [Fri, 25 Nov 2005 22:10:11 +0000 (17:10 -0500)]
SUNRPC: Funny looking code in __rpc_purge_upcall
In __rpc_purge_upcall (net/sunrpc/rpc_pipe.c), the newer code to clean up
the in_upcall list has a typo.
Thanks to Vince Busam <vbusam@google.com> for spotting this!
Trond Myklebust [Fri, 25 Nov 2005 22:10:06 +0000 (17:10 -0500)]
NFS: Fix a spinlock recursion inside nfs_update_inode()
In cases where the server has gone insane, nfs_update_inode() may end
up calling nfs_invalidate_inode(), which again calls stuff that takes
the inode->i_lock that we're already holding.
In addition, given the sort of things we have in NFS these days that
need to be cleaned up on inode release, I'm not sure we should ever
be calling make_bad_inode().
Fix up spinlock recursion, and limit nfs_invalidate_inode() to clearing
the caches, and marking the inode as being stale.
Thanks to Steve Dickson <SteveD@redhat.com> for spotting this.
Russell King [Fri, 25 Nov 2005 15:52:51 +0000 (15:52 +0000)]
[ARM] Do not call flush_tlb_kernel_range() with IRQs disabled.
We must not call TLB maintainence operations with interrupts disabled,
otherwise we risk a lockup in the SMP IPI code.
This means that consistent_free() can not be called from a context with
IRQs disabled. In addition, we must not hold the lock in consistent_free
when we call flush_tlb_kernel_range(). However, we must continue to
prevent consistent_alloc() from re-using the memory region until we've
finished tearing down the mapping and dealing with the TLB.
Therefore, leave the vm_region entry in the list, but mark it inactive
before dropping the lock and starting the tear-down process. After the
mapping has been torn down, re-acquire the lock and remove the entry
from the list.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Fri, 25 Nov 2005 15:43:22 +0000 (15:43 +0000)]
[ARM] Remove mach-types.h from head.S
We don't really need to check whether the machine type is Netwinder
or CATS before setting up the PCI IO mapping for debugging. This
allows us to eliminate asm/mach-types.h from head.S
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Fri, 25 Nov 2005 15:33:12 +0000 (15:33 +0000)]
[ARM] Remove asm/hardware.h include from SA1100 io.h
Unfortunately, we have a symbol clash between the SA-1100 header and
some drivers. Since everywhere which needs SA1100 specifics includes
asm/hardware.h, we don't need to include it in the SA1100 io.h header.
In file included from drivers/net/wireless/wavelan_cs.p.h:459,
from drivers/net/wireless/wavelan_cs.c:60:
drivers/net/wireless/wavelan_cs.h:97:1: warning: "LCSR" redefined
In file included from include/asm/arch/hardware.h:56,
from include/asm/hardware.h:16,
from include/asm/arch/io.h:13,
from include/asm/io.h:71,
from drivers/net/wireless/wavelan_cs.p.h:433,
from drivers/net/wireless/wavelan_cs.c:60:
include/asm/arch/SA-1100.h:1907:1: warning: this is the location of the previous definition
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
David Gibson [Thu, 24 Nov 2005 02:34:56 +0000 (13:34 +1100)]
[PATCH] powerpc: More hugepage boundary case fixes
Blah. The patch [0] I recently sent fixing errors with
in_hugepage_area() and prepare_hugepage_range() for powerpc itself has
an off-by-one bug. Furthermore, the related functions
touches_hugepage_*_range() and within_hugepage_*_range() are also
buggy. Some of the bugs, like those addressed in [0] originated with
commit 7d24f0b8a53261709938ffabe3e00f88f6498df9 where we tweaked the
semantics of where hugepages are allowed. Other bugs have been there
essentially forever, and are due to the undefined behaviour of '<<'
with shift counts greater than the type width (LOW_ESID_MASK could
return non-zero for high ranges with the right congruences).
The good news is that I now have a testsuite which should pick up
things like this if they creep in again.
Stephen Rothwell [Tue, 22 Nov 2005 01:05:26 +0000 (12:05 +1100)]
[PATCH] powerpc: remove arch/powerpc/include hack for 64 bit
With the removal of include/asm-powerpc, we no longer need
arch/powerpc/include/asm for the 64 bit build. We also do not need
-Iarch/powerpc for the 64 bit build either.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Felix Blyakher [Fri, 25 Nov 2005 05:42:13 +0000 (16:42 +1100)]
[XFS] Tight loop in xfs_finish_reclaim_all prevented the xfslogd to run
its queue of IO completion callbacks, thus creating the deadlock between
umount and xfslogd. Breaking the loop solves the problem.
Jasper Spaans [Thu, 24 Nov 2005 15:53:36 +0000 (16:53 +0100)]
[PATCH] fbcon: fix obvious bug in fbcon logo rotation code
This code fixes a tiny problem with the recent fbcon rotation changes:
fb_prepare_logo doesn't check the return value of fb_find_logo and that
causes a crash for my while booting.
Dave Airlie [Thu, 24 Nov 2005 10:41:14 +0000 (21:41 +1100)]
drm: fix quiescent locking
A fix for a locking bug which is triggered when a client tries to lock with
flag DMA_QUIESCENT (typically the X server), but gets interrupted by a signal.
The locking IOCTL should then return an error, but if DMA_QUIESCENT succeeds
it returns 0, and the client falsely thinks it has the lock. In addition
The client waits for DMA_QUISCENT and possibly DMA_READY without having the lock.
From: Thomas Hellstrom Signed-off-by: Dave Airlie <airlied@linux.ie>
David Härdeman [Wed, 23 Nov 2005 23:45:49 +0000 (15:45 -0800)]
[PATCH] USB: fix USB key generates ioctl_internal_command errors issue
On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote:
>On Wed, 16 Nov 2005 23:52:32 +0100, David Härdeman <david@2gen.com> wrote:
>> usb-storage: waiting for device to settle before scanning
>> Vendor: I0MEGA Model: UMni1GB*IOM2K4 Rev: 1.01
>> Type: Direct-Access ANSI SCSI revision: 02
>> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 00 00 00
>> sda: assuming drive cache: write through
>> ioctl_internal_command: <8 0 0 0> return code = 8000002
>> : Current: sense key=0x0
>> ASC=0x0 ASCQ=0x0
>> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
>
>I think it's harmless. I saw things like that, and initially I plugged
>them with workarounds like this:
Thanks for the pointer, and yes, it is harmless, but it floods the
console with the messages which hides other (potentially important)
messages...following your example I've made a patch which fixes the
problem.
This should fix a suspend/resume issues that appear with OHCI on some
PPC hardware. The PCI layer should doesn't have the hooks needed for
such ASIC-specific hooks (in this case, software clock gating), so
this moves the code to do that into hcd-pci.c ... where it can be
done after the relevant PCI PM state transition (to/from D3).
David Brownell [Wed, 23 Nov 2005 23:45:37 +0000 (15:45 -0800)]
[PATCH] USB: EHCI updates split init/reinit logic for resume
Moving the PCI-specific parts of the EHCI driver into their own file
created a few issues ... notably on resume paths which (like swsusp)
require re-initializing the controller. This patch:
- Splits the EHCI startup code into run-once HCD setup code and
separate "init the hardware" reinit code. (That reinit code is
a superset of the "early usb handoff" code.)
- Then it makes the PCI init code run both, and the resume code only
run the reinit code.
- It also removes needless pci wrappers around EHCI start/stop methods.
- Removes a byteswap issue that would be seen on big-endian hardware.
The HCD glue still doesn't actually provide a good way to do all this
run-one init stuff in one place though.
David Brownell [Wed, 23 Nov 2005 23:45:28 +0000 (15:45 -0800)]
[PATCH] USB: EHCI updates
This fixes some bugs in EHCI suspend/resume that joined us over the past
few releases (as usbcore, PCI, pmcore, and other components evolved):
- Removes suspend and resume recursion from the EHCI driver, getting
rid of the USB_SUSPEND special casing.
- Updates the wakeup mechanism to work again; there's a newish usbcore
call it needs to use.
- Provide simpler tests for "do we need to restart from scratch", to
address another case where PCI Vaux was lost. (In this case it was
restoring a swsusp snapshot, but there could be others.)
Un-exports a symbol that was temporarily exported.
A notable change from previous version is that this doesn't move
the spinlock init, so there's still a resume/reinit path bug.
Ian Abbott [Wed, 23 Nov 2005 23:45:23 +0000 (15:45 -0800)]
[PATCH] USB: ftdi_sio: new IDs for KOBIL devices
This patch adds two new devices to the ftdi_sio driver's device ID
table. The device IDs were supplied by Stefan Nies of KOBIL Systems for
two of their devices using the FTDI chip.
Damian Wrobel [Wed, 23 Nov 2005 23:45:17 +0000 (15:45 -0800)]
[PATCH] USB: SN9C10x driver - bad page state fix
This patch solves the following problem I've already discovered on the
latest 2.6.15-rc1-git1 kernel:
Nov 13 07:37:28 wrobel kernel: Bad page state at free_hot_cold_page (in process 'motion', page c164e020)
Nov 13 07:37:28 wrobel kernel: flags:0x40000400 mapping:00000000 mapcount:0 count:0
Nov 13 07:37:28 wrobel kernel: Backtrace:
Nov 13 07:37:28 wrobel kernel: [<c0146d86>] bad_page+0x85/0xbe
Nov 13 07:37:28 wrobel kernel: [<c0147629>] free_hot_cold_page+0x54/0x129
Nov 13 07:37:28 wrobel kernel: [<c01598c6>] __vunmap+0xa9/0xfe
Nov 13 07:37:28 wrobel kernel: [<c0154114>] vmalloc_to_page+0x34/0x55
Nov 13 07:37:28 wrobel kernel: [<c0159942>] vfree+0x27/0x35
Nov 13 07:37:28 wrobel kernel: [<f8a20292>] sn9c102_release_buffers+0x30/0x3f [sn9c102]
Nov 13 07:37:28 wrobel kernel: [<f8a231c2>] sn9c102_release+0x37/0xeb [sn9c102]
Nov 13 07:37:28 wrobel kernel: [<c0163e74>] __fput+0xa9/0x1aa
Nov 13 07:37:28 wrobel kernel: [<c01624f7>] filp_close+0x49/0x6d
Nov 13 07:37:30 wrobel kernel: [<c016258f>] sys_close+0x74/0x95
Nov 13 07:37:30 wrobel kernel: [<c0102ef9>] syscall_call+0x7/0xb
Nov 13 07:37:31 wrobel kernel: Trying to fix it up, but a reboot is needed
When attempting to hotadd a PCI card with a bridge on it, I saw
the kernel reporting resource collision errors even when there were
really no collisions. The problem is that the code doesn't skip
over "invalid" resources with their resource type flag not set.
Others have reported similar problems at boot time and for
non-bridge PCI card hotplug too, where the code flags a
resource collision for disabled ROMs. This patch fixes both
problems.
Rajesh Shah [Wed, 23 Nov 2005 23:44:54 +0000 (15:44 -0800)]
[PATCH] PCI Express Hotplug: clear sticky power-fault bit
Per the PCI Express spec, the power-fault-detected bit in the
slot status register can be set anytime hardware detects a power
fault, regardless of whether the slot has a device populated in
it or not. This bit is sticky and must be explicitly cleared.
This patch is needed to allow hot-add after such a power fault
has been detected.
Jean Delvare [Wed, 23 Nov 2005 23:44:31 +0000 (15:44 -0800)]
[PATCH] hwmon: Fix missing it87 fan div init
Fix a bug where setting the low fan speed limits will not work if no
data was ever read through the sysfs interface and the fan clock
dividers have not been explicitely set yet either. The reason is that
data->fan_div[nr] may currently be used before it is initialized from
the chip register values. The fix is to explicitely initialize
data->fan_div[nr] before using it.
Jean Delvare [Wed, 23 Nov 2005 23:44:26 +0000 (15:44 -0800)]
[PATCH] hwmon: Fix lm78 VID conversion
Fix the lm78 VID reading, which I accidentally broke while making
this driver use the common vid_from_reg function rather than
reimplementing its own in 2.6.14-rc1.
Jody McIntyre [Wed, 23 Nov 2005 23:44:03 +0000 (15:44 -0800)]
[PATCH] Clarify T: field in MAINTAINERS
Pavel Machek points out that for git repos, what we include is not
actually a URL. It is undesirable to use a URL since git repos can be
accessed in many different ways.
projects / linux-beck.git / log