Rusty Russell [Fri, 13 Feb 2015 06:43:40 +0000 (17:13 +1030)]
tools/lguest: handle device reset correctly in example launcher.
The example launcher doesn't reset the queue_enable like the spec says
we have to. Plus, we should reset the size in case they negotiated
a different (smaller) one.
This is easy to test by unloading and reloading a virtio module.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
virtual: Documentation: simplify and generalize paravirt_ops.txt
The general documentation we have for pv_ops is currenty present
on the IA64 docs, but since this documentation covers IA64 xen
enablement and IA64 Xen support got ripped out a while ago
through commit d52eefb47 present since v3.14-rc1 lets just
simplify, generalize and move the pv_ops documentation to a
shared place.
Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Alok Kataria <akataria@vmware.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:58:01 +0000 (15:28 +1030)]
lguest: remove NOTIFY call and eventfd facility.
Disappointing, as this was kind of neat (especially getting to use RCU
to manage the address -> eventfd mapping). But now the devices are PCI
handled in userspace, we get rid of both the NOTIFY hypercall and
the interface to connect an eventfd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:56:01 +0000 (15:26 +1030)]
lguest: use the PCI console device's emerg_wr for early boot messages.
This involves manually checking the console device (which is always in
slot 1 of bus 0) and using the window in VIRTIO_PCI_CAP_PCI_CFG to
program it (as we can't map the BAR yet).
We could in fact do this much earlier, but we wait for the first
write from the virtio_cons_early_init() facility.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:54:01 +0000 (15:24 +1030)]
lguest: support backdoor window.
The VIRTIO_PCI_CAP_PCI_CFG in the PCI virtio 1.0 spec allows access to
the BAR registers without mapping them. This is a compulsory feature,
and we implement it here.
There are some subtleties involving access widths which we should
note:
...
Upon detecting driver write access to pci_cfg_data, the device MUST
execute a write access at offset cap.offset at BAR selected by
cap.bar using the first cap.length bytes from pci_cfg_data.
Upon detecting driver read access to pci_cfg_data, the device MUST
execute a read access of length cap.length at offset cap.offset at
BAR selected by cap.bar and store the first cap.length bytes in
pci_cfg_data.
So, for a write, we copy into the pci_cfg_data window, then write from
there out to the BAR. This works correctly if cap.length != width of
write. Similarly, for a read, we read into window from the BAR then
read the value from there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:46:01 +0000 (15:16 +1030)]
lguest: Convert net device to virtio 1.0 PCI.
The only real change here (other than using the PCI bus) is that we
didn't negotiate VIRTIO_NET_F_MRG_RXBUF before, so the format of the
packet header changed with virtio 1.0; we need TUNSETVNETHDRSZ on the
tun fd to tell it about the extra two bytes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:45:11 +0000 (15:15 +1030)]
lguest: decode mmio accesses for PCI in example launcher.
We don't do anything with them yet (emulate_mmio_write and
emulate_mmio_read are stubs), but we decode the instructions and
search for the device they're hitting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:45:11 +0000 (15:15 +1030)]
lguest: add MMIO region allocator in example launcher.
This is where we point our PCI BARs, so that we can intercept MMIO
accesses. We tell the kernel about it so any faults in this area are
directed to us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:45:10 +0000 (15:15 +1030)]
lguest: suppress PS/2 keyboard polling.
While hacking on getting I/O out to the lguest launcher, I noticed
that returning 0xFF for the PS/2 keyboard status made it spin for a
while thinking there was a key pending. Fix this by returning 1
instead of 0xFF.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:45:10 +0000 (15:15 +1030)]
lguest: send trap 13 through to userspace.
We copy 7 bytes at eip for userspace's instruction decode; we have to
carefully handle the case where eip is at the end of a page. We can't
leave this to userspace since kernel has all the page table decode
logic.
The decode logic moves to userspace, basically unchanged.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Wed, 11 Feb 2015 04:31:14 +0000 (15:01 +1030)]
virtio_pci: use 16-bit accessor for queue_enable.
Since PCI is little endian, 8-bit access might work, but the spec section
is very clear on this:
4.1.3.1 Driver Requirements: PCI Device Layout
The driver MUST access each field using the “natural” access method,
i.e. 32-bit accesses for 32-bit fields, 16-bit accesses for 16-bit
fields and 8-bit accesses for 8-bit fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tetsuo Handa [Wed, 11 Feb 2015 04:31:13 +0000 (15:01 +1030)]
virtio: Avoid possible kernel panic if DEBUG is enabled.
The virtqueue_add() calls START_USE() upon entry. The virtqueue_kick() is
called if vq->num_added == (1 << 16) - 1 before calling END_USE().
The virtqueue_kick_prepare() called via virtqueue_kick() calls START_USE()
upon entry, and will call panic() if DEBUG is enabled.
Move this virtqueue_kick() call to after END_USE() call.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pawel Moll [Fri, 23 Jan 2015 04:15:55 +0000 (14:45 +1030)]
virtio-mmio: Update the device to OASIS spec version
This patch add a support for second version of the virtio-mmio device,
which follows OASIS "Virtual I/O Device (VIRTIO) Version 1.0"
specification.
Main changes:
1. The control register symbolic names use the new device/driver
nomenclature rather than the old guest/host one.
2. The driver detect the device version (version 1 is the pre-OASIS
spec, version 2 is compatible with fist revision of the OASIS spec)
and drives the device accordingly.
3. New version uses direct addressing (64 bit address split into two
low/high register) instead of the guest page size based one,
and addresses each part of the queue (descriptors, available, used)
separately.
4. The device activity is now explicitly triggered by writing to the
"queue ready" register.
5. Whole 64 bit features are properly handled now (both ways).
Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't know the # of VQs that drivers are going to use so it's hard to
predict how much memory we'll need to map. However, the relevant
capability does give us an upper limit.
If that's below a page, we can reduce the number of required
mappings by mapping it all once ahead of the time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
One thing *not* implemented here is separate mappings
for descriptor/avail/used rings. That's nice to have,
will be done later after we have core support.
This also exposes the PCI layout to userspace, and
adds macros for PCI layout offsets:
QEMU wants it, so why not? Trust, but verify.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sasha Levin [Fri, 2 Jan 2015 19:47:39 +0000 (14:47 -0500)]
virtio_pci: drop useless del_vqs call
Device VQs were getting freed twice: once in every device's removal
functions, and then again in virtio_pci_legacy_remove(). The ones in
devices are called first, so drop the useless second call.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Virtio drivers should map the part of the range they need, not
necessarily all of it.
To this end, support mapping ranges within BAR on s390.
Since multiple ranges can now be mapped within a BAR, we keep track of
the number of mappings created, and only clear out the mapping for a BAR
when this number reaches 0.
Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
pci-iomap.c was (apparently, mistakenly) reintroduced as part of
commit 83c2dc15ce824450e7044b9f90cd529c25747ae0
MN10300: Handle cacheable PCI regions in pci_iomap()
probably as side-effect of forward-porting the patch
from an old kernel.
It's not really needed: the generic pci_iomap does the right thing here.
The new file isn't compiled so it's safe to drop.
Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: trivial@kernel.org Cc: David Howells <dhowells@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/balloon needs config space access so make it
fail gracefully if not there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/scsi needs config space access so make it
fail gracefully if not there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/net needs config space access so make it
fail gracefully if not there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/console needs config space access so make it
fail gracefully if not there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/blk needs config space access so make it
fail gracefully if not there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some devices might not implement config space access
(e.g. remoteproc used not to - before 3.9).
virtio/9p needs config space access so make it
fail gracefully if not there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus Torvalds [Tue, 20 Jan 2015 19:54:16 +0000 (07:54 +1200)]
Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
- Bartlomiej will be co-maintaining PATA portion of libata. git
workflow will stay the same.
- sata_sil24 wasn't happy with tag ordered submission. An option to
restore the old tag allocation behavior is implemented for sil24.
- a very old race condition in PIO host state machine which can trigger
BUG fixed.
- other driver-specific changes
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: prevent HSM state change race between ISR and PIO
libata: allow sata_sil24 to opt-out of tag ordered submission
ata: pata_at91: depend on !ARCH_MULTIPLATFORM
ahci: Remove Device ID for Intel Sunrise Point PCH
ahci: Use dev_info() to inform about the lack of Device Sleep support
libata: Whitelist SSDs that are known to properly return zeroes after TRIM
sata_dwc_460ex: fix resource leak on error path
ata: add MAINTAINERS entry for libata PATA drivers
libata: clean up MAINTAINERS entries
libata: export ata_get_cmd_descript()
ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command.
ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
Linus Torvalds [Tue, 20 Jan 2015 19:51:46 +0000 (07:51 +1200)]
Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"The xfs folks have been running into weird and very rare lockups for
some time now. I didn't think this could have been from workqueue
side because no one else was reporting it. This time, Eric had a
kdump which we looked into and it turned out this actually was a
workqueue bug and the bug has been there since the beginning of
concurrency managed workqueue.
A worker pool ensures forward progress of the workqueues associated
with it by always having at least one worker reserved from executing
work items. When the pool is under contention, the idle one tries to
create more workers for the pool and if that doesn't succeed quickly
enough, it calls the rescuers to the pool.
This logic had a subtle race condition in an early exit path. When a
worker invokes this manager function, the function may return %false
indicating that the caller may proceed to executing work items either
because another worker is already performing the role or conditions
have changed and the pool is no longer under contention.
The latter part depended on the assumption that whether more workers
are necessary or not remains stable while the pool is locked; however,
pool->nr_running (concurrency count) may change asynchronously and it
getting bumped from zero asynchronously could send off the last idle
worker to execute work items.
The race window is fairly narrow, and, even when it gets triggered,
the pool deadlocks iff if all work items get blocked on pending work
items of the pool, which is highly unlikely but can be triggered by
xfs.
The patch removes the race window by removing the early exit path,
which doesn't server any purpose anymore anyway"
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix subtle pool management issue which can stall whole worker_pool
Linus Torvalds [Tue, 20 Jan 2015 09:23:41 +0000 (21:23 +1200)]
Merge tag 'pinctrl-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is a (hopefully final) slew of pin control fixes for the v3.19
series. The deadlock fix is kind of serious and tagged for stable,
the rest is business as usual.
- Fix two deadlocks around the pin control mutexes, a long-standing
issue that manifest itself in plug/unplug of pin controllers.
(Tagged for stable.)
- Handle an error path with zero functions in the Qualcomm pin
controller.
- Drop a bogus second GPIO chip added in the Lantiq driver.
- Fix sudden IRQ loss on Rockchip pin controllers.
- Register the GIT tree in MAINTAINERS"
* tag 'pinctrl-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: MAINTAINERS: add git tree reference
pinctrl: qcom: Don't iterate past end of function array
pinctrl: lantiq: remove bogus of_gpio_chip_add
pinctrl: Fix two deadlocks
pinctrl: rockchip: Avoid losing interrupts when supporting both edges
1) Socket addresses returned in the error queue need to be fully
initialized before being passed on to userspace, fix from Willem de
Bruijn.
2) Interrupt handling fixes to davinci_emac driver from Tony Lindgren.
3) Fix races between receive packet steering and cpu hotplug, from Eric
Dumazet.
4) Allowing netlink sockets to subscribe to unknown multicast groups
leads to crashes, don't allow it. From Johannes Berg.
5) One to many socket races in SCTP fixed by Daniel Borkmann.
6) Put in a guard against the mis-use of ipv6 atomic fragments, from
Hagen Paul Pfeifer.
7) Fix promisc mode and ethtool crashes in sh_eth driver, from Ben
Hutchings.
8) NULL deref and double kfree fix in sxgbe driver from Girish K.S and
Byungho An.
9) cfg80211 deadlock fix from Arik Nemtsov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
s2io: use snprintf() as a safety feature
r8152: remove sram_read
r8152: remove generic_ocp_read before writing
bgmac: activate irqs only if there is nothing to poll
bgmac: register napi before the device
sh_eth: Fix ethtool operation crash when net device is down
sh_eth: Fix promiscuous mode on chips without TSU
ipv6: stop sending PTB packets for MTU < 1280
net: sctp: fix race for one-to-many sockets in sendmsg's auto associate
genetlink: synchronize socket closing and family removal
genetlink: disallow subscribing to unknown mcast groups
genetlink: document parallel_ops
net: rps: fix cpu unplug
net: davinci_emac: Add support for emac on dm816x
net: davinci_emac: Fix ioremap for devices with MDIO within the EMAC address space
net: davinci_emac: Fix incomplete code for getting the phy from device tree
net: davinci_emac: Free clock after checking the frequency
net: davinci_emac: Fix runtime pm calls for davinci_emac
net: davinci_emac: Fix hangs with interrupts
ip: zero sockaddr returned on error queue
...
Pull crypto fix from Herbert Xu:
"This fixes a regression that arose from the change to add a crypto
prefix to module names which was done to prevent the loading of
arbitrary modules through the Crypto API.
In particular, a number of modules were missing the crypto prefix
which meant that they could no longer be autoloaded"
hayeswang [Mon, 19 Jan 2015 09:02:46 +0000 (17:02 +0800)]
r8152: remove sram_read
Read OCP register 0xa43a~0xa43b would clear some flags which the hw
would use, and it may let the device lost. However, the unit of
reading is 4 bytes. That is, it would read 0xa438~0xa43b when calling
sram_read() to read OCP_SRAM_DATA.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Mon, 19 Jan 2015 09:02:45 +0000 (17:02 +0800)]
r8152: remove generic_ocp_read before writing
For ocp_write_word() and ocp_write_byte(), there is a generic_ocp_read()
which is used to read the whole 4 byte data, keep the unchanged bytes,
and modify the expected bytes. However, the "byen" could be used to
determine which bytes of the 4 bytes to write, so the action could be
removed.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 19 Jan 2015 21:00:02 +0000 (16:00 -0500)]
Merge branch 'bgmac'
Hauke Mehrtens says:
====================
bgmac: some fixes to napi usage
I compared the napi documentation with the bgmac driver and found some
problems in that driver. These two patches should fix the problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 19 Jan 2015 20:37:44 +0000 (15:37 -0500)]
Merge branch 'sh_eth'
Ben Hutchings says:
====================
sh_eth fixes
I'm currently looking at Ethernet support on the R-Car H2 chip,
reviewing and testing the sh_eth driver. Here are fixes for two fairly
obvious bugs in the driver; I will probably have some more later.
These are not tested on any of the other supported chips.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 16 Jan 2015 17:51:25 +0000 (17:51 +0000)]
sh_eth: Fix ethtool operation crash when net device is down
The driver connects and disconnects the PHY device whenever the
net device is brought up and down. The ethtool get_settings,
set_settings and nway_reset operations will dereference a null
or dangling pointer if called while it is down.
I think it would be preferable to keep the PHY connected, but there
may be good reasons not to.
As an immediate fix for this bug:
- Set the phydev pointer to NULL after disconnecting the PHY
- Change those three operations to return -ENODEV while the PHY is
not connected
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Fri, 16 Jan 2015 17:51:12 +0000 (17:51 +0000)]
sh_eth: Fix promiscuous mode on chips without TSU
Currently net_device_ops::set_rx_mode is only implemented for
chips with a TSU (multiple address table). However we do need
to turn the PRM (promiscuous) flag on and off for other chips.
- Remove the unlikely() from the TSU functions that we may safely
call for chips without a TSU
- Make setting of the MCT flag conditional on the tsu capability flag
- Rename sh_eth_set_multicast_list() to sh_eth_set_rx_mode() and plumb
it into both net_device_ops structures
- Remove the previously-unreachable branch in sh_eth_rx_mode() that
would otherwise reset the flags to defaults for non-TSU chips
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Reduce the attack vector and stop generating IPv6 Fragment Header for
paths with an MTU smaller than the minimum required IPv6 MTU
size (1280 byte) - called atomic fragments.
See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1]
for more information and how this "feature" can be misused.
Signed-off-by: Fernando Gont <fgont@si6networks.com> Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David Jeffery [Mon, 19 Jan 2015 19:03:25 +0000 (13:03 -0600)]
libata: prevent HSM state change race between ISR and PIO
It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to
HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE
and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().
This problem is hard to reproduce making this patch hard to verify, but this
fix will prevent the race.
I have not been able to reproduce the problem, but here is a crash dump from
a 2.6.32 kernel.
On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE:
Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(),
which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value.
Somewhere between the ata_sff_hsm_move() check and the ata_sff_host_intr() check, the value changed.
On examining the other cpus to see what else was running, another cpu was running the error handler
routines:
Before it tried to acquire a spinlock, ata_exec_internal_sg() called ata_sff_flush_pio_task().
This function will set ap->hsm_task_state to HSM_ST_IDLE, and has no locking around setting this
value. ata_sff_flush_pio_task() can then race with the interrupt handler and potentially set
HSM_ST_IDLE at a fatal moment, which will trigger a kernel BUG.
v2: Fixup comment in ata_sff_flush_pio_task()
tj: Further updated comment. Use ap->lock instead of shost lock and
use the [un]lock_irq variant instead of the irqsave/restore one.
Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
Dan Williams [Fri, 16 Jan 2015 23:13:02 +0000 (15:13 -0800)]
libata: allow sata_sil24 to opt-out of tag ordered submission
Ronny reports: https://bugzilla.kernel.org/show_bug.cgi?id=87101
"Since commit 8a4aeec8d "libata/ahci: accommodate tag ordered
controllers" the access to the harddisk on the first SATA-port is
failing on its first access. The access to the harddisk on the
second port is working normal.
When reverting the above commit, access to both harddisks is working
fine again."
Maintain tag ordered submission as the default, but allow sata_sil24 to
continue with the old behavior.
Cc: <stable@vger.kernel.org> Cc: Tejun Heo <tj@kernel.org> Reported-by: Ronny Hegewald <Ronny.Hegewald@online.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Stephen Boyd [Mon, 19 Jan 2015 10:17:45 +0000 (11:17 +0100)]
pinctrl: qcom: Don't iterate past end of function array
Timur reports that this code crashes if nfunctions is 0. Fix the
loop iteration to only consider valid elements of the functions
array.
Reported-by: Timur Tabi <timur@codeaurora.org> Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Ivan T. Ivanov <iivanov@mm-sol.com> Cc: Andy Gross <agross@codeaurora.org> Fixes: 327455817a92 "pinctrl: qcom: Add support for reset for apq8064" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Sun, 18 Jan 2015 17:03:13 +0000 (05:03 +1200)]
Merge tag 'gpio-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here is a set of fixes that mainly appeared when Johan Hovold started
exercising the removal path of the GPIO library, dealing with
hotplugging of GPIO controllers. Details from tag:
A slew of fixes dealing with some irritating bugs (non-regressions)
that have been around forever in the GPIO subsystem, most of them also
tagged for stable:
- A large slew of fixes from Johan Hovold who is finally testing and
reviewing the removal path of the GPIO drivers.
- Fix of_get_named_gpiod_flags() so it works as expected.
- Fix an IRQ handling bug in the crystalcove driver"
* tag 'gpio-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: of: Correct error handling in of_get_named_gpiod_flags
gpio: sysfs: fix gpio attribute-creation race
gpio: sysfs: fix gpio device-attribute leak
gpio: sysfs: fix gpio-chip device-attribute leak
gpio: unregister gpiochip device before removing it
gpio: fix sleep-while-atomic in gpiochip_remove
gpio: fix memory leak and sleep-while-atomic
gpio: clean up gpiochip_add error handling
gpio: fix gpio-chip list corruption
gpio: fix memory and reference leaks in gpiochip_add error path
gpio: crystalcove: use handle_nested_irq
Linus Torvalds [Sun, 18 Jan 2015 16:55:23 +0000 (04:55 +1200)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - fix ioctl nr overflow for UI_GET_SYSNAME/VERSION
Input: I8042 - add Acer Aspire 7738 to the nomux list
Input: elantech - support new ICs types for version 4
Input: i8042 - reset keyboard to fix Elantech touchpad detection
MAINTAINERS: remove Dmitry Torokhov's alternate address
Linus Torvalds [Sun, 18 Jan 2015 06:00:40 +0000 (18:00 +1200)]
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"We've been sitting on our fixes branch for a while, so this batch is
unfortunately on the large side.
A lot of these are tweaks and fixes to device trees, fixing various
bugs around clocks, reg ranges, etc. There's also a few defconfig
updates (which are on the late side, no more of those).
All in all the diffstat is bigger than ideal at this time, but nothing
in here seems particularly risky"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
reset: sunxi: fix spinlock initialization
ARM: dts: disable CCI on exynos5420 based arndale-octa
drivers: bus: check cci device tree node status
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288
ARM: nomadik: fix up leftover device tree pins
ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
ARM: at91/dt: sam9263: Add missing clocks to lcdc node
ARM: at91: sama5d3: dt: correct the sound route
ARM: at91/dt: sama5d4: fix the timer reg length
ARM: exynos_defconfig: Enable LM90 driver
ARM: exynos_defconfig: Enable options for display panel support
arm: dts: Use pmu_system_controller phandle for dp phy
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: dts: berlin: correct BG2Q's SM GPIO location.
ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT
ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
...
Daniel Borkmann [Thu, 15 Jan 2015 15:34:35 +0000 (16:34 +0100)]
net: sctp: fix race for one-to-many sockets in sendmsg's auto associate
I.e. one-to-many sockets in SCTP are not required to explicitly
call into connect(2) or sctp_connectx(2) prior to data exchange.
Instead, they can directly invoke sendmsg(2) and the SCTP stack
will automatically trigger connection establishment through 4WHS
via sctp_primitive_ASSOCIATE(). However, this in its current
implementation is racy: INIT is being sent out immediately (as
it cannot be bundled anyway) and the rest of the DATA chunks are
queued up for later xmit when connection is established, meaning
sendmsg(2) will return successfully. This behaviour can result
in an undesired side-effect that the kernel made the application
think the data has already been transmitted, although none of it
has actually left the machine, worst case even after close(2)'ing
the socket.
Instead, when the association from client side has been shut down
e.g. first gracefully through SCTP_EOF and then close(2), the
client could afterwards still receive the server's INIT_ACK due
to a connection with higher latency. This INIT_ACK is then considered
out of the blue and hence responded with ABORT as there was no
alive assoc found anymore. This can be easily reproduced f.e.
with sctp_test application from lksctp. One way to fix this race
is to wait for the handshake to actually complete.
The fix defers waiting after sctp_primitive_ASSOCIATE() and
sctp_primitive_SEND() succeeded, so that DATA chunks cooked up
from sctp_sendmsg() have already been placed into the output
queue through the side-effect interpreter, and therefore can then
be bundeled together with COOKIE_ECHO control chunks.
Looks like this bug is from the pre-git history museum. ;)
Fixes: 08707d5482df ("lksctp-2_5_31-0_5_1.patch") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 18 Jan 2015 03:29:11 +0000 (15:29 +1200)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clock driver fixes from Mike Turquette:
"Small number of fixes for clock drivers and a single null pointer
dereference fix in the framework core code.
The driver fixes vary from fixing section mismatch warnings to
preventing machines from hanging (and preventing developers from
crying)"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
clk: fix possible null pointer dereference
Revert "clk: ppc-corenet: Fix Section mismatch warning"
clk: rockchip: fix deadlock possibility in cpuclk
clk: berlin: bg2q: remove non-exist "smemc" gate clock
clk: at91: keep slow clk enabled to prevent system hang
clk: rockchip: fix rk3288 cpuclk core dividers
clk: rockchip: fix rk3066 pll lock bit location
clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri
clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
Linus Torvalds [Sun, 18 Jan 2015 03:26:52 +0000 (15:26 +1200)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is one fix for a Multiqueue sleeping in invalid context problem
and a MAINTAINER file update for Qlogic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ->queue_rq can't sleep
MAINTAINERS: Update maintainer list for qla4xxx
The commit 646cafc6 (clk: Change clk_ops->determine_rate to
return a clk_hw as the best parent) opens a possibility for
null pointer dereference, fix this.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
That commit tried to fix the section mismatch warning by moving the
ppc_corenet_clk_driver struct to init section. This is definitely wrong
because the kernel would free the memories occupied by this struct
after boot while this driver is still registered in the driver core.
The kernel would panic when accessing this driver struct.
Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
Linus Torvalds [Sat, 17 Jan 2015 18:26:24 +0000 (06:26 +1200)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two patches, the first by Andy to fix dw dmac runtime pm and second
one by me to fix the dmaengine headers in MAINTAINERS"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: balance PM runtime calls
MAINTAINERS: dmaengine: fix the header file for dmaengine
Linus Torvalds [Sat, 17 Jan 2015 18:24:30 +0000 (06:24 +1200)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also two PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools powerpc: Use dwfl_report_elf() instead of offline.
perf tools: Fix segfault for symbol annotation on TUI
perf test: Fix dwarf unwind using libunwind.
perf tools: Avoid build splat for syscall numbers with uclibc
perf tools: Elide strlcpy warning with uclibc
perf tools: Fix statfs.f_type data type mismatch build error with uclibc
tools: Remove bitops/hweight usage of bits in tools/perf
perf machine: Fix __machine__findnew_thread() error path
perf tools: Fix building error in x86_64 when dwarf unwind is on
perf probe: Propagate error code when write(2) failed
perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM
perf/rapl: Fix sysfs_show() initialization for RAPL PMU
projects / linux-beck.git / log