Markus Elfring [Mon, 15 Aug 2016 06:34:56 +0000 (08:34 +0200)]
fjes: Delete owner assignment
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Fri, 12 Aug 2016 16:30:48 +0000 (00:30 +0800)]
pptp: Refactor the struct and macros of PPTP codes
1. Use struct gre_base_hdr directly in pptp_gre_header instead of
duplicated members;
2. Use existing macros like GRE_KEY, GRE_SEQ, and so on instead of
duplicated macros defined by PPTP;
3. Add new macros like GRE_IS_ACK/SEQ and so on instead of
PPTP_GRE_IS_A/S and so on;
Signed-off-by: Gao Feng <fgao@ikuai8.com> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Fri, 12 Aug 2016 15:43:54 +0000 (15:43 +0000)]
net: macb: add missing free_netdev() on error in macb_probe()
Add the missing free_netdev() before return from function macb_probe()
in the platform_get_irq() error handling case.
Fixes: c69618b3e4f2 ("net/macb: fix probe sequence to setup clocks earlier") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 11 Aug 2016 23:29:54 +0000 (23:29 +0000)]
qed: Fix possible memory leak in qed_dcbnl_get_ieee_pfc()
'dcbx_info is malloced in qed_dcbnl_get_ieee_pfc() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.
Fixes: a1d8d8a51e83 ("qed: Add dcbnl support.") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Aug 2016 04:16:58 +0000 (21:16 -0700)]
Merge branch 'cxgb4-IFLA_VF_MAC'
Hariprasad Shenai says:
====================
cxgb4: Add support for IFLA_VF_MAC
We're struggling to implement the PCI SR-IOV management features for
administering Virtual Functions which represent networking devices using
the current Linux APIs. The problem is that these APIs incorporate all
sorts of assumptions which don't match chelsio networking cards.
For instance, the current APIs assume a 1-to-1 mapping of Network Ports,
Physical Functions and the SR-IOV Virtual Functions of those Physical
Functions. This is not the case with our cards where any Virtual Function
can be hooked up to any Port -- or any number of Ports the current Linux
APIs also assume only 1 Network Interface/Port can be accessed per Virtuali
Function.
Another issue is that these APIs assume that the Administrative Driver is
attached to the Physical Function Associated with a Virtual Function. This
is not the case with our card where all administration is performed by a
Driver which is not attached to any of the Physical Functions which have
SR-IOV PCI Capabilities.
Another consequence of these assumptions is the inability to utilize all
of the cards SR-IOV resources. For instance, our cards have SR-IOV
Capabilities on Physical Functions 0..3 and the administrative Driver
attaches to Physical Function 4. Each of the Physical Functions 0..3 can
support up to 16 Virtual Functions. With the current Linux APIs, a 2-Port
card would only be able to use the Virtual Functions on Physical
Function 0..1 and not allow the Virtual Functions on Physical
Functions 2..3 to be used since there are no Ports 2..3 on a 2-Port card.
Patch 1/2 adds support to create management interface for each PF to control
thier corresponding VF's. Patch 2/2 adds support for ndo_set_vf_mac.
This patch series has been created against net-next tree.
We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
V5: Fix warning reported by kbuild bot when CONFIG_PCI_IOV isn't defined.
V4: Handle memory allocation failure for adapter->mbox_log in init_one().
Based on review comment by Yuval Mintz <Yuval.Mintz@qlogic.com>
V3: Based on review comment by Yuval Mintz, removed extra parameter pf
added to IFLA_VF API's and created a net_device corresponding to
each PF for controling their VF. Based on review comment by
Yuval Mintz <Yuval.Mintz@qlogic.com>
V2: Fixed check for MAC address in Patch 2/2, based on review comment by
Yuval Mintz <Yuval.Mintz@qlogic.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: Add control net_device for configuring PCIe VF
Issue:
For instance, the current APIs assume a 1-to-1 mapping of Network Ports,
Physical Functions and the SR-IOV Virtual Functions of those Physical
Functions. This is not the case with our cards where any Virtual
Function can be hooked up to any Port -- or any number of Ports the
current Linux APIs also assume only 1 Network Interface/Port can be
accessed per Virtual Function.
Another issue is that these APIs assume that the Administrative Driver
is attached to the Physical Function Associated with a Virtual Function.
This is not the case with our card where all administration is performed
by a Driver which is not attached to any of the Physical Functions which
have SR-IOV PCI Capabilities.
Another consequence of these assumptions is the inability to utilize all
of the cards SR-IOV resources. For instance, our cards have SR-IOV
Capabilities on Physical Functions 0..3 and the administrative Driver
attaches to Physical Function 4. Each of the Physical Functions 0..3 can
support up to 16 Virtual Functions. With the current Linux APIs, a
2-Port card would only be able to use the Virtual Functions on Physical
Function 0..1 and not allow the Virtual Functions on Physical Functions
2..3 to be used since there are no Ports 2..3 on a 2-Port card.
Fix:
Since the control node is always the netdevice for all VF ACL commands.
Created a dummy netdevice for each Physical Function from 0 to 3 through
which one could control their VFs. The device won't be associated with
any port, since it doesn't need to transmit/receive. Its purely used
for VF management purpose only. The device will be registered only when
VF for a particular PF is configured using PCI sysfs interface and
unregistered while pci_disable_sriov() for the PF is called.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Aug 2016 04:09:11 +0000 (21:09 -0700)]
Merge branch 'proc-per-ns'
Dmitry Torokhov says:
====================
Make /proc per net namespace objects belong to container
Currently [almost] all /proc objects belong to the global root, even if
data belongs to a given namespace within a container and (at least for
sysctls) we work around permssions checks to allow container's root to
access the data.
This series changes ownership of net namespace /proc objects
(/proc/net/self/* and /proc/sys/net/*) to be container's root and not
global root when there exists mapping for container's root in user
namespace.
This helps when running Android CTS in a container, but I think it makes
sense regardless.
Changes from V1:
- added fix for crash when !CONFIG_NET_NS (new patch #1)
- addressed Eric'c comments for error handling style in patch #3 and
added his Ack
- adjusted patch #2 to use the same style of erro handling
- sent out as series instead of separate patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Wed, 10 Aug 2016 21:36:02 +0000 (14:36 -0700)]
net: make net namespace sysctls belong to container's owner
If net namespace is attached to a user namespace let's make container's
root owner of sysctls affecting said network namespace instead of global
root.
This also allows us to clean up net_ctl_permissions() because we do not
need to fudge permissions anymore for the container's owner since it now
owns the objects in question.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Wed, 10 Aug 2016 21:36:01 +0000 (14:36 -0700)]
proc: make proc entries inherit ownership from parent
There are certain parameters that belong to net namespace and that are
exported in /proc. They should be controllable by the container's owner,
but are currently owned by global root and thus not available.
Let's change proc code to inherit ownership of parent entry, and when
create per-ns "net" proc entry set it up as owned by container's owner.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Wed, 10 Aug 2016 21:36:00 +0000 (14:36 -0700)]
netns: do not call pernet ops for not yet set up init_net namespace
When CONFIG_NET_NS is disabled, registering pernet operations causes
init() to be called immediately with init_net as an argument. Unfortunately
this leads to some pernet ops, such as proc_net_ns_init() to be called too
early, when init_net namespace has not been fully initialized. This causes
issues when we want to change pernet ops to use more data from the net
namespace in question, for example reference user namespace that owns our
network namespace.
To fix this we could either play game of musical chairs and rearrange init
order, or we could do the same as when CONFIG_NET_NS is enabled, and
postpone calling pernet ops->init() until namespace is set up properly.
Note that we can not simply undo commit ed160e839d2e ("[NET]: Cleanup
pernet operation without CONFIG_NET_NS") and use the same implementations
for __register_pernet_operations() and __unregister_pernet_operations(),
because many pernet ops are marked as __net_initdata and will be discarded,
which wreaks havoc on our ops lists. Here we rely on the fact that we only
use lists until init_net is fully initialized, which happens much earlier
than discarding __net_initdata sections.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 12 Aug 2016 20:29:24 +0000 (21:29 +0100)]
net: phy: initialize rc to zero to avoid returning garbage value
In the case where phydev->interrupts is not PHY_INTERRUPT_ENABLED
function vsc85xx_ack_interrupt is returning an uninitialized
garbage value. Fix this by initializing rc to zero.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 22:11:05 +0000 (15:11 -0700)]
Merge tag 'mac80211-next-for-davem-2016-08-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Not much for -next so far, but here it goes:
* send more nl80211 events for interfaces
* remove useless network/transport offset mangling code
* validate beacon intervals identically for all interface types
* use driver rate estimates for mesh
* fix a compiler type/signedness warning
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 21:53:41 +0000 (14:53 -0700)]
Merge branch 'net-urb-alloc-failure'
Wolfram Sang says:
====================
net: don't print error when allocating urb fails
This per-subsystem series is part of a tree wide cleanup. usb_alloc_urb() uses
kmalloc which already prints enough information on failure. So, let's simply
remove those "allocation failed" messages from drivers like we did already for
other -ENOMEM cases. gkh acked this approach when we talked about it at LCJ in
Tokyo a few weeks ago.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Thu, 11 Aug 2016 21:05:27 +0000 (23:05 +0200)]
net: usb: lan78xx: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Kosina [Fri, 12 Aug 2016 14:34:49 +0000 (16:34 +0200)]
net: fix up a few missing hashtable.h conflict resolutions
There are a couple of leftover symbol conflicts caused by hashtable.h
being included by netdevice.h; those were not caught as build failure
(they're "only" a warning, but in fact real bugs). Fix those up.
Fixes: e87a8f24c ("net: resolve symbol conflicts with generic hashtable.h") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 19:00:49 +0000 (12:00 -0700)]
Merge branch 'thunderx-next'
Sunil Goutham says:
====================
net: thunderx: Support for newer chips and miscellaneous patches
This patch series adds support for VNIC on 81xx and 83xx SOCs.
81xx/83xx is different from 88xx in terms of capabilities and new type
of interfaces supported (eg: QSGMII, RGMII) and have DLMs instead of
QLMs which allows single BGX to have interfaces of different LMAC types.
Also included some patches which are common for all 88xx/81xx/83xx
SOCs like using netdev's name while registering irqs, reset receive
queue stats and some changes to use standard API for split buffer Rx
packets, generating RSS key e.t.c
PS: Most of the patches were submitted earlier under different series but
for some reason were not picked up by patchwork. Since new patches have been
added in the meantime, resubmitting all as a new patchset.
Changes from v1:
- Incorporated Yuval Mintz's suggestion to use generic API to set minimum
queue count i.e by using netif_get_num_default_rss_queues().
- Resolved a compilation issue reported by test robot while compiling
patch 'Add support for 16 LMACs of 83xx'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:44 +0000 (16:51 +0530)]
net: thunderx: Don't set RX_PACKET_DIS while initializing
Setting BGXX_SPUX_MISC_CONTROL::RX_PACKET_DIS is not needed as
packet reception is anyway disabled by BGXX_CMRX_CONFIG::DATA_PKT_RX_EN.
Also setting RX_PACKET_DIS causes a bogus remote fault condition
which delays link detection.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jerin Jacob [Fri, 12 Aug 2016 11:21:39 +0000 (16:51 +0530)]
net: thunderx: Reset RXQ HW stats when interface is brought down
When SQ/TXQ is reclaimed i.e reset it's stats also automatically reset
by HW. This is not the case with RQ. Also VF doesn't have write access
to statistics counter registers. Hence a new Mbox msg is introduced which
supports resetting RQ, SQ and full Qset stats. Currently only RQ stats
are being reset using this mbox message.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: thunderx: Improvement for MBX interface debug messages
Adding debug messages in case of NACK for a mailbox message, also
did small cleanups.
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:37 +0000 (16:51 +0530)]
net: thunderx: Use skb_add_rx_frag() for split buffer Rx pkts
Instead of a round about way of converting buffers to SKBs and
combining them into a frag list, use standard skb_add_rx_frag()
API to merge page fragments. This code is useful when incoming
packets are of size more than RCV_FRAG_LEN which is currently
set to 2048bytes.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:36 +0000 (16:51 +0530)]
net: thunderx: Use netdev's name for naming VF's interrupts
This patch changes the way VF's irqs are visible in /proc/interrupts.
Instead of VF id, logical interface's netdev name is used for IRQ
naming and also all secondary VF's interrupts in multiqset config
use primary VF's netdev name.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:34 +0000 (16:51 +0530)]
net: thunderx: Add support for 16 LMACs of 83xx
83xx will have 4 BGX blocks i.e 16 LMACs, to avoid changing
the same with every platform, nicpf struct elements which
track LMAC related info are now allocated runtime based
on platform's max possible BGX count.
Also fixed configuring min packet size for all LMAC's
supported on a platform.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:33 +0000 (16:51 +0530)]
net: thunderx: Add RGMII interface type support
This patch adds RGX/RGMII interface type support to BGX
driver. This type of interface is supported by 81xx SOC.
CN81XX VNIC has 8 VFs and max possible LMAC interfaces are 9,
hence RGMII interface will not work if all DLMs are in BGX mode
and all 8 LMACs are enabled
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:30 +0000 (16:51 +0530)]
net: thunderx: Support for different LMAC types within BGX
On 88xx all LMACs in a BGX will be in same mode but on 81xx
BGX can be split as two and there can be LMACs configured in
different modes.
These changes move lmac_type, lane2serdes fields into per lmac
struct from BGX struct. Got rid of qlm_mode field which has become
redundant with these changes. And now no of valid LMACs is read
from CSRs configured by low level firmware and figuring out the
same based on QLM mode is discarded
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:29 +0000 (16:51 +0530)]
net: thunderx: Enable mailbox interrupts on 81xx/83xx
88xx has 128 VFs, 81xx has 8 VFs and 83xx will have 32VFs.
Made changes to PF driver such that mailbox interrupt enable
registers are configuired based on number of VFs HW supports.
Also cleanedup mailbox irq handler registration code.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike 88xx, CQE_RX descriptor's tunnelling extension i.e CQE_RX2_S
is always enabled on 81xx/83xx and HW does insert these fields into
CQE_RX. As a result receive buffer addresses will now be present at
7th word of CQE_RX instead of 6th.
Enable CQE_RX2_S on 88xx pass 2.x as well.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:27 +0000 (16:51 +0530)]
net: thunderx: Set queue count based on number of CPUs
81xx has only 4 CPUs, so it doesn't make sense to initialize
entire Qset i.e 8 queues by default. Made changes to queue
initialization to init queues equal to number of CPUs or
8 queues whichever is lesser. Also this will be applicable to
VMs with VNIC VF attached and having less VCPUs
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:25 +0000 (16:51 +0530)]
net: thunderx: Add VNIC's PCI devid on future chips
This patch adds PCI device IDs of VNIC on newer chips and also
registers VF driver with them. Device id remains same for all
versions of chips but subsystem device id changes.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Fri, 12 Aug 2016 11:21:24 +0000 (16:51 +0530)]
net: thunderx: Moved HW capability info from macros to structure
Current driver has most of the HW maximums info like no of channels,
traffic limiters, RSS indices e.t.c in the form of macros. These have
been moved into a 'hw_info' structure so that support for VNIC on
newer chips with different set of HW maximums can be added.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Added rxlos GPIO mapping by adding rxlos-gpios property.
Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When 10GbE SFP+ module is not plugged in or cable is not connected,
the link status register does not report the proper state due
to floating signal. This patch checks the module present status via an
GPIO to determine whether to ignore the link status register and report
link down.
Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
drivers: net: xgene: XFI PCS reset when link is down
This patch fixes the link recovery issue, by doing PCS reset
when the link is down.
Signed-off-by: Fushen Chen <fchen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch rearranges the port initialization sequence as recommended by
hardware specification. This patch also removes, mac_init() call from
xgene_enet_link_state(), as it was not required.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes FPSel and NxtFPSel fields length to 5-bit value.
Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since register_netdev() call in xgene_enet_probe() was moved down to
the end, it doesn't properly handle errors that may occur, by
deconstructing everything that was setup before the error occurred.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed compiler warnings reported with -Wmaybe-uninitialized W=1,
/drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_rx_frame’:
../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:455:27: warning: variable ‘pdata’ set but not used [-Wunused-but-set-variable]
struct xgene_enet_pdata *pdata;
^
../drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_remove’:
../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:1691:30: warning: variable ‘mac_ops’ set but not used [-Wunused-but-set-variable]
const struct xgene_mac_ops *mac_ops;
^
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 04:57:13 +0000 (21:57 -0700)]
Merge branch 'bpf-improvements'
Alexei Starovoitov says:
====================
bpf improvements
Two bpf improvements:
1. allow bpf helpers like bpf_map_lookup_elem() access packet data directly
for XDP programs
2. enable bpf_get_prandom_u32() for tracing programs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf: allow bpf_get_prandom_u32() to be used in tracing
bpf_get_prandom_u32() was initially introduced for socket filters
and later requested numberous times to be added to tracing bpf programs
for the same reason as in socket filters: to be able to randomly
select incoming events.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Aaron Yue [Fri, 12 Aug 2016 01:17:17 +0000 (18:17 -0700)]
samples/bpf: add verifier tests for the helper access to the packet
test various corner cases of the helper function access to the packet
via crafted XDP programs.
Signed-off-by: Aaron Yue <haoxuany@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
The helper functions like bpf_map_lookup_elem(map, key) were only
allowing 'key' to point to the initialized stack area.
That is causing performance degradation when programs need to process
millions of packets per second and need to copy contents of the packet
into the stack just to pass the stack pointer into the lookup() function.
Allow such helpers read from the packet directly.
All helpers that expect ARG_PTR_TO_MAP_KEY, ARG_PTR_TO_MAP_VALUE,
ARG_PTR_TO_STACK assume byte aligned pointer, so no alignment concerns,
only need to check that helper will not be accessing beyond
the packet range verified by the prior 'if (ptr < data_end)' condition.
For now allow this feature for XDP programs only. Later it can be
relaxed for the clsact programs as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 04:49:42 +0000 (21:49 -0700)]
Merge branch 'bpf-under-cgroup'
Sargun Dhillon says:
====================
Add test_current_task_under_cgroup bpf helper and test
This patchset includes a helper and an example to determine whether the probe is
currently executing in the context of a specific cgroup based on a cgroup bpf
map / array. The helper checks the cgroupsv2 hierarchy based on the handle in
the map and if the current cgroup is equal to it, or a descendant of it. The
helper was tested with the example program, and it was verified that the correct
behaviour occurs in the interrupt context.
In an earlier version of this patchset I had added an "opensnoop"-like tool, and
I realized I was basically reimplementing a lot of the code that already exists
in the bcc repo. So, instead I decided to write a test that creates a new mount
namespace, mounts up the cgroupv2 hierarchy, and does some basic tests. I used
the sync syscall as a canary for these tests because it's a simple, 0-arg
syscall. Once this patch is accepted, adding support to opensnoop will be easy.
I also added a task_under_cgroup_hierarchy function in cgroups.h, as this
pattern is used in a couple places. Converting those can be done in a later
patchset.
Thanks to Alexei, Tejun, and Daniel for providing review.
v1->v2: Clean up
v2->v3: Move around ifdefs out of *.c files, add an "integration" test
v3->v4: De-genercize arraymap fetching function;
rename helper from in_cgroup to under_cgroup (makes much more sense)
Split adding cgroups task_under_cgroup_hierarchy function
v4->v5: Fix formatting
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Fri, 12 Aug 2016 15:57:04 +0000 (08:57 -0700)]
samples/bpf: Add test_current_task_under_cgroup test
This test has a BPF program which writes the last known pid to call the
sync syscall within a given cgroup to a map.
The user mode program creates its own mount namespace, and mounts the
cgroupsv2 hierarchy in there, as on all current test systems
(Ubuntu 16.04, Debian), the cgroupsv2 vfs is unmounted by default.
Once it does this, it proceeds to test.
The test checks for positive and negative condition. It ensures that
when it's part of a given cgroup, its pid is captured in the map,
and that when it leaves the cgroup, this doesn't happen.
It populate a cgroups arraymap prior to execution in userspace. This means
that the program must be run in the same cgroups namespace as the programs
that are being traced.
Signed-off-by: Sargun Dhillon <sargun@sargun.me> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Fri, 12 Aug 2016 15:56:52 +0000 (08:56 -0700)]
bpf: Add bpf_current_task_under_cgroup helper
This adds a bpf helper that's similar to the skb_in_cgroup helper to check
whether the probe is currently executing in the context of a specific
subset of the cgroupsv2 hierarchy. It does this based on membership test
for a cgroup arraymap. It is invalid to call this in an interrupt, and
it'll return an error. The helper is primarily to be used in debugging
activities for containers, where you may have multiple programs running in
a given top-level "container".
Signed-off-by: Sargun Dhillon <sargun@sargun.me> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Sargun Dhillon [Fri, 12 Aug 2016 15:56:40 +0000 (08:56 -0700)]
cgroup: Add task_under_cgroup_hierarchy cgroup inline function to headers
This commit adds an inline function to cgroup.h to check whether a given
task is under a given cgroup hierarchy. This is to avoid having to put
ifdefs in .c files to gate access to cgroups. When cgroups are disabled
this always returns true.
Signed-off-by: Sargun Dhillon <sargun@sargun.me> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Aug 2016 03:42:20 +0000 (20:42 -0700)]
Merge branch 'sfc-SFN8000-support-improvements'
Bert Kenward says:
====================
sfc: SFN8000 support improvements
This series improves support for the recently released SFN8000 series
of adapters. Specifically, it retrieves interrupt moderation timer
settings directly from the adapter and uses those settings. It also
uses a new event queue initialisation interface, allowing specification
of a performance objective rather than enabling individual flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:02:36 +0000 (13:02 +0100)]
sfc: get timer configuration from adapter
On SFN8000 series adapters the MC provides a method to get the timer
quantum and the maximum timer setting. We revert to the old values if the
new call is unavailable.
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:02:09 +0000 (13:02 +0100)]
sfc: set interrupt moderation via MCDI
SFN8000-series NICs require a new method of setting interrupt moderation,
via MCDI. This is indicated by a workaround flag. This new MCDI command
takes an explicit time value rather than a number of ticks. It therefore
makes sense to also store the moderation values in terms of time, since
that is what the ethtool interface is interested in.
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 11 Aug 2016 12:01:54 +0000 (13:01 +0100)]
sfc: use new performance based event queue init
Rather than explicitly specifying flags we can now specify a desired
performance target to the firmware, ie higher throughput or lower latency.
For now we use the default "auto" configuration.
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Thu, 11 Aug 2016 09:51:00 +0000 (17:51 +0800)]
net: ethernet: mediatek: enhance the locking using the lightweight ones
Since these critical sections protected by page_lock are all entered
from the user context or bottom half context, they can be replaced
with the spin_lock() or spin_lock_bh instead of spin_lock_irqsave().
Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Aug 2016 23:57:20 +0000 (16:57 -0700)]
Merge branch 'xilinx-gmiitorgmii-converter'
Kedareswara rao Appana says:
====================
net: phy: Add xilinx gmiitorgmii converter support
The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
Ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
This core can be used in all three modes of operation(10/100/1000 Mb/s).
The Management Data Input/Output (MDIO) interface is used to configure the
Speed of operation. This core can switch dynamically between the three
Different speed modes by configuring the conveter register through mdio write.
The conveter sits b/w the MAC and external phy like below
Using MAC MDIO bus we can access both the converter and the external PHY.
We need to program the line speed of the converter during run time based
On the external phy negotiated speed.
This patch series does the below
---> Add mask for Control register 10Mbps speed.
---> Add support for xilinx gmiitorgmii converter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for gmiitorgmii converter.
The GMII to RGMII IP core provides the Reduced Gigabit Media
Independent Interface (RGMII) between Ethernet physical media
Devices and the Gigabit Ethernet controller. This core can
Switch dynamically between the three different speed modes of
Operation by configuring the converter register through mdio write.
MDIO interface is used to set operating speed of Ethernet MAC.
This converter sits between the MAC and the external phy
MAC <==> GMII2RGMII <==> RGMII_PHY
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Device-tree binding documentation for xilinx gmiitorgmii converter.
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds mask for the Control register
10Mbps speed.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim Altshul [Thu, 11 Aug 2016 10:38:16 +0000 (13:38 +0300)]
mac80211: call get_expected_throughput only after adding station
Depending on which method the driver implements, userspace could
call this (indirectly, by getting station info) before the driver
knows about the station, possibly causing it to misbehave.
Therefore, add a check for sta->uploaded which indicates that the
driver knows about the station.
Denis Kenzior [Wed, 3 Aug 2016 21:58:35 +0000 (16:58 -0500)]
cfg80211: always notify userspace when wireless netdev is removed
This change alters the semantics of NL80211_CMD_DEL_INTERFACE events
by always sending this event whenever a net_device object associated
with a wdev is destroyed. Prior to this change, this event was only
emitted as a result of NL80211_CMD_DEL_INTERFACE command sent from
userspace. This allows userspace to reliably detect when wireless
interfaces have been removed, e.g. due to USB removal events, etc.
For wireless device objects without an associated net_device (e.g.
NL80211_IFTYPE_P2P_DEVICE), the NL80211_CMD_DEL_INTERFACE event is
now generated inside cfg80211_unregister_wdev.
Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Denis Kenzior [Wed, 3 Aug 2016 21:58:33 +0000 (16:58 -0500)]
cfg80211: always notify userspace of new wireless netdevs
This change alters the semantics of NL80211_CMD_NEW_INTERFACE events
by always sending this event whenever a new net_device object
associated with a wdev is registered. Prior to this change, this event
was only sent as a result of NL80211_CMD_NEW_INTERFACE command sent
from userspace. This allows userspace to reliably detect new wireless
interfaces (e.g. due to hardware hot-plug events, etc).
For wdevs created without an associated net_device object (e.g.
NL80211_IFTYPE_P2P_DEVICE), the NL80211_CMD_NEW_INTERFACE event is
still generated inside the relevant nl80211 command handler.
Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 13 Jul 2016 09:00:02 +0000 (11:00 +0200)]
mac80211: remove skb header offset mangling in ieee80211_build_hdr
Since the code only touches the MAC headers, the offsets to the
network/transport headers remain the same throughout this function.
Remove pointless pieces of code that try to 'preserve' them.
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211: mesh: Add support for HW RC implementation
Mesh HWMP module will be able to rely on the HW
RC algorithm if it exists, for path metric calculations.
This allows the metric calculation mechanism to calculate
a correct metric, based on PER and last TX rate both via
HW RC algorithm if it exists or via parameters collected
by the SW.
Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Philippe Reynes [Tue, 9 Aug 2016 22:04:49 +0000 (00:04 +0200)]
net: ethernet: renesas: sh_eth: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Philippe Reynes [Tue, 9 Aug 2016 22:04:48 +0000 (00:04 +0200)]
net: ethernet: renesas: sh_eth: use phydev from struct net_device
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy_dev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log