Erik Hugne [Fri, 29 Jun 2012 04:50:21 +0000 (00:50 -0400)]
tipc: remove TIPC packet debugging functions and macros
The link queue traces and packet level debug functions served
a purpose during early development, but are now redundant
since there are other, more capable tools available for
debugging at the packet level.
The TIPC_DEBUG Kconfig option is removed since it does not
provide any extra debugging features anymore.
This gets rid of a lot of tipc_printf usages, which will
make the pending cleanup work of that function easier.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Erik Hugne [Fri, 29 Jun 2012 04:16:37 +0000 (00:16 -0400)]
tipc: use standard printk shortcut macros (pr_err etc.)
All messages should go directly to the kernel log. The TIPC
specific error, warning, info and debug trace macro's are
removed and all references replaced with pr_err, pr_warn,
pr_info and pr_debug.
Commonly used sub-strings are explicitly declared as a const
char to reduce .text size.
Note that this means the debug messages (changed to pr_debug),
are now enabled through dynamic debugging, instead of a TIPC
specific Kconfig option (TIPC_DEBUG). The latter will be
phased out completely
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
[PG: use pr_fmt as suggested by Joe Perches <joe@perches.com>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Paul Gortmaker [Wed, 11 Jul 2012 21:35:01 +0000 (17:35 -0400)]
tipc: limit error messages relating to memory leak to one line
With the default name table size of 1024, it is possible that
the sanity check in tipc_nametbl_stop could spam out 1024
essentially identical error messages if memory was corrupted
or similar. Limit it to issuing no more than a single message.
The actual chain number (i.e. 0 --> 1023) wouldn't provide any
useful insight if/when such an instance happened, so don't
bother printing out that value.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Paul Gortmaker [Wed, 11 Jul 2012 13:40:43 +0000 (09:40 -0400)]
tipc: factor stats struct out of the larger link struct
This is done to improve readability, and so that we can give
the struct a name that will allow us to declare a local
pointer to it in code, instead of having to always redirect
through the link struct to get to it.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Li RongQing [Mon, 9 Jul 2012 23:56:12 +0000 (23:56 +0000)]
bridge: fix endian
mld->mld_maxdelay is net endian, so we should use ntohs, not htons
CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Li RongQing [Mon, 9 Jul 2012 20:56:06 +0000 (20:56 +0000)]
ksz884x: fix Endian
ETH_P_IP is host Endian, skb->protocol is big Endian, when
compare them, Using htons on skb->protocol is wrong.
And fix two code style issues: indentation and remove
unnecessary parentheses.
CC: Tristram Ha <Tristram.Ha@micrel.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Joe Perches <joe@perches.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 10 Jul 2012 10:04:40 +0000 (10:04 +0000)]
bnx2: Fix bug in bnx2_free_tx_skbs().
In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address
when it gets to the last entry of the tx ring. We were not using
the proper macro to skip the last entry when advancing the tx index.
Reported-by: Zongyun Lai <zlai@vmware.com> Reviewed-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 10 Jul 2012 10:03:41 +0000 (10:03 +0000)]
IPoIB: fix skb truesize underestimatiom
Or Gerlitz reported triggering of WARN_ON_ONCE(delta < len); in
skb_try_coalesce()
This warning tracks drivers that incorrectly set skb->truesize
IPoIB indeed allocates a full page to store a fragment, but only
accounts in skb->truesize the used part of the page (frame length)
This patch fixes skb truesize underestimation, and
also fixes a performance issue, because RX skbs have not enough tailroom
to allow IP and TCP stacks to pull their header in skb linear part
without an expensive call to pskb_expand_head()
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Shlomo Pongartz <shlomop@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Hanania [Mon, 9 Jul 2012 20:47:19 +0000 (20:47 +0000)]
net: Fix memory leak - vlan_info struct
In driver reload test there is a memory leak.
The structure vlan_info was not freed when the driver was removed.
It was not released since the nr_vids var is one after last vlan was removed.
The nr_vids is one, since vlan zero is added to the interface when the interface
is being set, but the vlan zero is not deleted at unregister.
Fix - delete vlan zero when we unregister the device.
Signed-off-by: Amir Hanania <amir.hanania@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Herring [Mon, 9 Jul 2012 14:16:08 +0000 (14:16 +0000)]
net: calxedaxgmac: fix hang on rx refill
Fix intermittent hangs in xgmac_rx_refill. If a ring buffer entry already
had an skb allocated, then xgmac_rx_refill would get stuck in a loop. This
can happen on a rx error when we just leave the skb allocated to the entry.
[ 7884.510000] INFO: rcu_preempt detected stall on CPU 0 (t=727315 jiffies)
[ 7884.510000] [<c0010a59>] (unwind_backtrace+0x1/0x98) from [<c006fd93>] (__rcu_pending+0x11b/0x2c4)
[ 7884.510000] [<c006fd93>] (__rcu_pending+0x11b/0x2c4) from [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8)
[ 7884.510000] [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) from [<c0036abb>] (update_process_times+0x2b/0x48)
[ 7884.510000] [<c0036abb>] (update_process_times+0x2b/0x48) from [<c004e8fd>] (tick_sched_timer+0x51/0x94)
[ 7884.510000] [<c004e8fd>] (tick_sched_timer+0x51/0x94) from [<c0045527>] (__run_hrtimer+0x4f/0x1e8)
[ 7884.510000] [<c0045527>] (__run_hrtimer+0x4f/0x1e8) from [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4)
[ 7884.510000] [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) from [<c00101d3>] (twd_handler+0x17/0x24)
[ 7884.510000] [<c00101d3>] (twd_handler+0x17/0x24) from [<c006be39>] (handle_percpu_devid_irq+0x59/0x114)
[ 7884.510000] [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) from [<c0069aab>] (generic_handle_irq+0x17/0x2c)
[ 7884.510000] [<c0069aab>] (generic_handle_irq+0x17/0x2c) from [<c000cc8d>] (handle_IRQ+0x35/0x7c)
[ 7884.510000] [<c000cc8d>] (handle_IRQ+0x35/0x7c) from [<c033b153>] (__irq_svc+0x33/0xb8)
[ 7884.510000] [<c033b153>] (__irq_svc+0x33/0xb8) from [<c0244b06>] (xgmac_rx_refill+0x3a/0x140)
[ 7884.510000] [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) from [<c02458ed>] (xgmac_poll+0x265/0x3bc)
[ 7884.510000] [<c02458ed>] (xgmac_poll+0x265/0x3bc) from [<c029fcbf>] (net_rx_action+0xc3/0x200)
[ 7884.510000] [<c029fcbf>] (net_rx_action+0xc3/0x200) from [<c0030cab>] (__do_softirq+0xa3/0x1bc)
Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:35 +0000 (14:09 +0000)]
ll_temac: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set by the driver on packet recieve.
eth_type_trans already sets skb->dev to the proper value and it is not
referenced anywhere else in the dirver, thus making its setting unnecessary.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:34 +0000 (14:09 +0000)]
sunhme: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is
already being set to the proper value when eth_type_trans is called on packet
receive, and the skb->dev is not referenced anywhere else in the code.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:33 +0000 (14:09 +0000)]
sungem: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set by the driver's skb alloc routine (which is
called in init and during rx). It is already being set to the proper value when
eth_type_trans is called on packet receive, and the skb->dev is not referenced
anywhere else in the code.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:32 +0000 (14:09 +0000)]
sunbmac: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is
already being set to the proper value when eth_type_trans is called on packet
receive, and the skb->dev is not referenced anywhere else in the code.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:31 +0000 (14:09 +0000)]
qlge: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set by the driver on packet recieve.
eth_type_trans already sets skb->dev to the proper value and it is not
referenced anywhere else in the dirver, thus making its setting unnecessary.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:30 +0000 (14:09 +0000)]
qlcnic: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set before calling eth_type_trans.
eth_type_trans already sets skb->dev to the proper value, thus making this
unnecessary.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:29 +0000 (14:09 +0000)]
ksz884x: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set during ring init. It is already being set
to the proper value when eth_type_trans is called on packet receive, and the
skb->dev is not referenced anywhere else in the code.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:28 +0000 (14:09 +0000)]
lantiq_etop: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set before calling eth_type_trans.
eth_type_trans already sets skb->dev to the proper value, thus making this
unnecessary.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:27 +0000 (14:09 +0000)]
netxen: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set by the driver on packet recieve.
eth_type_trans already sets skb->dev to the proper value and it is not
referenced anywhere else in the dirver, thus making its setting unnecessary.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:26 +0000 (14:09 +0000)]
enic: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set after calling eth_type_trans.
eth_type_trans already sets skb->dev to the proper value, thus making this
unnecessary.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason [Mon, 9 Jul 2012 14:09:25 +0000 (14:09 +0000)]
lance: remove unnecessary setting of skb->dev
skb->dev is being unnecessarily set during ring init. It is already being set
to the proper value when eth_type_trans is called on packet receive, and the
skb->dev is not referenced anywhere else in the code.
Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 10 Jul 2012 19:05:57 +0000 (19:05 +0000)]
ipv6: optimize ipv6 addresses compares
On 64 bit arches having efficient unaligned accesses (eg x86_64) we can
use long words to reduce number of instructions for free.
Joe Perches suggested to change ipv6_masked_addr_cmp() to return a bool
instead of 'int', to make sure ipv6_masked_addr_cmp() cannot be used
in a sorting function.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 10 Jul 2012 10:56:59 +0000 (10:56 +0000)]
drivers/net/ethernet: Fix non-kernel-doc comments with kernel-doc start markers
Convert doxygen (or similar) formatted comments to kernel-doc or
unformatted comment. Delete a few that are content-free.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 10 Jul 2012 10:56:00 +0000 (10:56 +0000)]
drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions
Fix incorrect start markers, wrapped summary lines, missing section
breaks, incorrect separators, and some name mismatches. Delete
a few that are content-free.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Jul 2012 05:53:57 +0000 (22:53 -0700)]
Merge branch 'metrics_restructure'
This patch series works towards the goal of minimizing the amount
of things that can change in an ipv4 route.
In a regime where the routing cache is removed, route changes will
lead to cloning in the FIB tables or similar.
The largest trigger of route metrics writes, TCP, now has it's own
cache of dynamic metric state. The timewait timestamps are stored
there now as well.
As a result of that, pre-cowing metrics is no longer necessary,
and therefore FLOWI_FLAG_PRECOW_METRICS is removed.
Redirect and PMTU handling is moved back into the ipv4 routes. I'm
sorry for all the headaches trying to do this in the inetpeer has
caused, it was the wrong approach for sure.
Since metrics become read-only for ipv4 we no longer need the inetpeer
hung off of the ipv4 routes either. So those disappear too.
Also, timewait sockets no longer need to hold onto an inetpeer either.
After this series, we still have some details to resolve wrt. PMTU and
redirects for a route-cache-less system:
1) With just the plain route cache removal, PMTU will continue to
work mostly fine. This is because of how the local route users
call down into the PMTU update code with the route they already
hold.
However, if we wish to cache pre-computed routes in fib_info
nexthops (which we want for performance), then we need to add
route cloning for PMTU events.
2) Redirects require more work. First, redirects must be changed to
be handled like PMTU. Wherein we call down into the sockets and
other entities, and then they call back into the routing code with
the route they were using.
So we'll be adding an ->update_nexthop() method alongside
->update_pmtu().
And then, like for PMTU, we'll need cloning support once we start
caching routes in the fib_info nexthops.
But that's it, we can completely pull the trigger and remove the
routing cache with minimal disruptions.
As it is, this patch series alone helps a lot of things. For one,
routing cache entry creation should be a lot faster, because we no
longer do inetpeer lookups (even to check if an entry exists).
This patch series also opens the door for non-DST_HOST ipv4 routes,
because nothing fundamentally cares about rt->rt_dst any more. It
can be removed with the base routing cache removal patch. In fact,
that was the primary goal of this patch series.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Jul 2012 11:01:57 +0000 (04:01 -0700)]
inet: Kill FLOWI_FLAG_PRECOW_METRICS.
No longer needed. TCP writes metrics, but now in it's own special
cache that does not dirty the route metrics. Therefore there is no
longer any reason to pre-cow metrics in this way.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Jul 2012 07:49:14 +0000 (00:49 -0700)]
tcp: Maintain dynamic metrics in local cache.
Maintain a local hash table of TCP dynamic metrics blobs.
Computed TCP metrics are no longer maintained in the route metrics.
The table uses RCU and an extremely simple hash so that it has low
latency and low overhead. A simple hash is legitimate because we only
make metrics blobs for fully established connections.
Some tweaking of the default hash table sizes, metric timeouts, and
the hash chain length limit certainly could use some tweaking. But
the basic design seems sound.
With help from Eric Dumazet and Joe Perches.
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Tue, 10 Jul 2012 06:18:44 +0000 (06:18 +0000)]
etherdevice: introduce eth_broadcast_addr
A lot of code has either the memset or an inefficient copy
from a static array that contains the all-ones broadcast
address. Introduce eth_broadcast_addr() to fill an address
with all ones, making the code clearer and allowing us to
get rid of some constant arrays.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Jul 2012 01:05:28 +0000 (18:05 -0700)]
ipv4: Fix crashes in fib_rules_tclass().
All paths assume, when CONFIG_IP_MULTIPLE_TABLES is enabled, that any
successful call to fib_lookup() will initialize the fib_result->r
value to something.
We violated that expectation in the new fib_lookup() fast path.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 5 Jul 2012 11:45:13 +0000 (11:45 +0000)]
gianfar: fix potential sk_wmem_alloc imbalance
commit db83d136d7f753 (gianfar: Fix missing sock reference when
processing TX time stamps) added a potential sk_wmem_alloc imbalance
If the new skb has a different truesize than old one, we can get a
negative sk_wmem_alloc once new skb is orphaned at TX completion.
Now we no longer early orphan skbs in dev_hard_start_xmit(), this
probably can lead to fatal bugs.
Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Cc: Jiajun Wu <b06378@freescale.com> Cc: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Sun, 8 Jul 2012 01:37:43 +0000 (01:37 +0000)]
drivers/net/ethernet/broadcom/cnic.c: remove invalid reference to list iterator variable
If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure. Thus this value should not be used after
the end of the iterator. There does not seem to be a meaningful value to
provide to netdev_warn. Replace with pr_warn, since pr_err is used
elsewhere.
This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Sun, 8 Jul 2012 01:37:39 +0000 (01:37 +0000)]
net/rxrpc/ar-peer.c: remove invalid reference to list iterator variable
If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure. Thus this value should not be used after
the end of the iterator. This seems to be a copy-paste bug from a previous
debugging message, and so the meaningless value is just deleted.
This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Sun, 8 Jul 2012 01:37:38 +0000 (01:37 +0000)]
drivers/isdn/mISDN/stack.c: remove invalid reference to list iterator variable
If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure. Thus this value should not be used after
the end of the iterator. The dereferences are just deleted from the
debugging statement.
This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Mon, 9 Jul 2012 21:57:36 +0000 (16:57 -0500)]
net/fsl_pq_mdio: use spin_event_timeout() to poll the indicator register
Macro spin_event_timeout() was designed for simple polling of hardware
registers with a timeout, so use it when we poll the MIIMIND register.
This allows us to return an error code instead of polling indefinitely.
Note that PHY_INIT_TIMEOUT is a count of loop iterations, so we can't use
it for spin_event_timeout(), which asks for microseconds.
Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 8 Jul 2012 21:45:10 +0000 (21:45 +0000)]
net: cgroup: fix out of bounds accesses
dev->priomap is allocated by extend_netdev_table() called from
update_netdev_tables().
And this is only called if write_priomap() is called.
But if write_priomap() is not called, it seems we can have out of bounds
accesses in cgrp_destroy(), read_priomap() & skb_update_prio()
With help from Gao Feng
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: debugfs and network namespaces are incompatible
The bonding debugfs support has been broken in the presence of network
namespaces since it has been added. The debugfs support does not handle
multiple bonding devices with the same name in different network
namespaces.
I haven't had any bug reports, and I'm not interested in getting any.
Disable the debugfs support when network namespaces are enabled.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: Manage /proc/net/bonding/ entries from the netdev events
It was recently reported that moving a bonding device between network
namespaces causes warnings from /proc. It turns out after the move we
were trying to add and to remove the /proc/net/bonding entries from the
wrong network namespace.
Move the bonding /proc registration code into the NETDEV_REGISTER and
NETDEV_UNREGISTER events where the proc registration and unregistration
will always happen at the right time.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
as the manual of module_pci_driver says that
it can be used when the init and exit functions of
the module does nothing but the pci_register_driver
and pci_unregister_driver.
use it for rdc's r6040 driver, as the init and exit
paths does as above, and also this reduces a little
amount of code.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 9 Jul 2012 06:02:24 +0000 (06:02 +0000)]
bnx2x: populate skb->l4_rxhash
l4_rxhash is set on skb when rxhash is obtained from canonical 4-tuple
over transport ports/addresses.
We can set skb->l4_rxhash for all incoming TCP packets on bnx2x for
free, as cqe status contains a hash type information.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Mon, 2 Jul 2012 09:23:22 +0000 (17:23 +0800)]
r8169: support RTL8168G
For RTL8111G, the settings of phy and firmware are replaced with
ocp functions. r8168g_mdio_{write / read} redirects the relative
settings to suitable ocp functions. A per-device variable is needed
to evaluate the real address of ocp functions.
rtl_writephy(tp, 0x1f, xxxx) is dedicated to keeping said variable
up-to-date.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
For the higher mtu sizes requiring the buffer size greater than 8192,
the buffers are sent or received using multiple dma descriptors/ same
descriptor with option of multi buffer handling.
It was observed during tests that the driver was missing on data
packets during the normal ping operations if the data buffers being used
catered to jumbo frame handling.
The memory barrriers are added in between preparation of dma descriptors
in the jumbo frame handling path to ensure all instructions before
enabling the dma are complete.
Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It was observed that during multiple reboots nfs hangs. The status of
receive descriptors shows that all the descriptors were in control of
CPU, and none were assigned to DMA.
Also the DMA status register confirmed that the Rx buffer is
unavailable.
This patch adds the fix for the same by adding the memory barriers to
ascertain that the all instructions before enabling the Rx or Tx DMA are
completed which involves the proper setting of the ownership bit in DMA
descriptors.
Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
iwlegacy: don't mess up the SCD when removing a key
When we remove a key, we put a key index which was supposed
to tell the fw that we are actually removing the key. But
instead the fw took that index as a valid index and messed
up the SRAM of the device.
This memory corruption on the device mangled the data of
the SCD. The impact on the user is that SCD queue 2 got
stuck after having removed keys.
Reported-by: Paul Bolle <pebolle@tiscali.nl> Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
If we only monitor while associated, the following
can happen:
- we're associated, and the queue stuck check
runs, setting the queue "touch" time to X
- we disassociate, stopping the monitoring,
which leaves the time set to X
- almost 2s later, we associate, and enqueue
a frame
- before the frame is transmitted, we monitor
for stuck queues, and find the time set to
X, although it is now later than X + 2000ms,
so we decide that the queue is stuck and
erroneously restart the device
Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
On rt2x00_dmastart() we increase index specified by Q_INDEX and on
rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries
between Q_INDEX_DONE and Q_INDEX are those we currently process in the
hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can
submit to the hardware.
According to that fix rt2x00usb_kick_queue(), as we need to submit RX
entries that are not processed by the hardware. It worked before only
for empty queue, otherwise was broken.
Note that for TX queues indexes ordering are ok. We need to kick entries
that have filled skb, but was not submitted to the hardware, i.e.
started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set.
From practical standpoint this fixes RX queue stall, usually reproducible
in AP mode, like for example reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=828824
Reported-and-tested-by: Franco Miceli <fmiceli@plan.ceibal.edu.uy> Reported-and-tested-by: Tom Horsley <horsley1953@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211: destroy assoc_data correctly if assoc fails
If association failed due to internal error (e.g. no
supported rates IE), we call ieee80211_destroy_assoc_data()
with assoc=true, while we actually reject the association.
This results in the BSSID not being zeroed out.
After passing assoc=false, we no longer have to call
sta_info_destroy_addr() explicitly. While on it, move
the "associated" message after the assoc_success check.
Cc: stable@vger.kernel.org [3.4+] Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Thomas Huehn [Fri, 29 Jun 2012 13:26:27 +0000 (06:26 -0700)]
mac80211: correct size the argument to kzalloc in minstrel_ht
msp has type struct minstrel_ht_sta_priv not struct minstrel_ht_sta.
(This incorporates the fixup originally posted as "mac80211: fix kzalloc
memory corruption introduced in minstrel_ht". -- JWL)
Reported-by: Fengguang Wu <wfg@linux.intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
David S. Miller [Mon, 9 Jul 2012 09:47:59 +0000 (02:47 -0700)]
Merge branch 'master' of git://1984.lsi.us.es/nf
Pablo Neira Ayuso says:
====================
* One to get the timeout special parameter for the SET target back working
(this was introduced while trying to fix another bug in 3.4) from
Jozsef Kadlecsik.
* One crash fix if containers and nf_conntrack are used reported by Hans
Schillstrom by myself.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
removed netdev->base_addr so we need to update cnic to get the MMIO
base address from pci_resource_start(). Otherwise, mmap of the uio
device will fail.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a device with limited QMI support. It does not support
normal QMI_WDS commands for connection management. Instead,
sending a QMI_CTL SET_INSTANCE_ID command is required to
enable the network interface:
01 0f 00 00 00 00 00 00 20 00 04 00 01 01 00 00
A number of QMI_DMS and QMI_NAS commands are also supported
for optional device management.
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
we set max_prioidx to the first zero bit index of prioidx_map in
function get_prioidx.
So when we delete the low index netprio cgroup and adding a new
netprio cgroup again,the max_prioidx will be set to the low index.
when we set the high index cgroup's net_prio.ifpriomap,the function
write_priomap will call update_netdev_tables to alloc memory which
size is sizeof(struct netprio_map) + sizeof(u32) * (max_prioidx + 1),
so the size of array that map->priomap point to is max_prioidx +1,
which is low than what we actually need.
fix this by adding check in get_prioidx,only set max_prioidx when
max_prioidx low than the new prioidx.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log