Ian Abbott [Thu, 1 Nov 2012 16:28:29 +0000 (16:28 +0000)]
staging: comedi: gsc_hpdi: don't store physical base addresses
In `struct hpdi_private`, the `plx9080_phys_iobase` and
`hpdi_phys_iobase` hold the physical memory addresses from the PCI
BARs used by this driver. The physical addresses are only really needed
when ioremapping the resources when the device is being attached by
`hpdi_auto_attach()`. A non-zero value of the `hpdi_phys_iobase` is
also used to indicate that a call to `comedi_pci_enable()` was
successful so that `comedi_pci_disable()` should be called when the
device is detached by `hpdi_detach()`.
Remove the `plx9080_phys_iobase` and `hpdi_phys_iobase` members and use
`dev->iobase` as a flag to indicate whether `comedi_pci_disable()` needs
to be called by `hpdi_detach()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 1 Nov 2012 16:28:28 +0000 (16:28 +0000)]
staging: comedi: gsc_hpdi: remove devpriv->hw_dev
The `hw_dev` member of `struct hpdi_private` is used to point to the
`struct pci_dev`. This is redundant as the `struct comedi_device`
already has a pointer to the `struct device` within the `struct pci_dev`
and there is a convenient inline function, `comedi_to_pci_dev(dev)` that
returns a pointer to the `struct pci_dev`.
Remove the redundant `hw_dev` member and use alternate ways to get at
the `struct pci_dev`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 1 Nov 2012 16:28:27 +0000 (16:28 +0000)]
staging: comedi: gsc_hpdi: use auto_attach method
This driver does not need to support manual attachment of supported PCI
devices. Replace the `attach()` hook (`hpdi_attach()`) with an
`auto_attach()` hook (`hpdi_auto_attach()`). This will be called via
`comedi_pci_auto_config()` at PCI probe time.
This driver no longer increments the PCI reference during attachment, so
remove the call to `pci_dev_put()` when detaching the device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Thu, 1 Nov 2012 06:24:40 +0000 (02:24 -0400)]
staging: csr: sme_blocking.c: add missing check for return of sme_wait_for_reply
sme_ap_config misses a check of the return of the sme_wait_for_reply
as all other functions do here, for the return of sme_wait_for_reply
add the check and fail if it returns other than 0.
Ian Abbott [Thu, 1 Nov 2012 14:02:20 +0000 (14:02 +0000)]
staging: comedi: skel: do auto-attachment of PCI devices
This driver is an example of how to write a Comedi driver and includes
some code for handling PCI devices, but not very much. It calls
`comedi_pci_auto_config()` at PCI probe time. That normally expects to
call the comedi driver's `auto_attach()` hook (or the deprecated
`attach_pci()` hook), but will fall back to using the `attach()` hook
that should only be used for attaching devices "manually" via the
`COMEDI_DEVCONFIG` ioctl.
Add an `auto_attach()` hook (`skel_auto_attach()`) to handle
auto-attachment of supported PCI devices. Add comments to the
`attach()` hook (`skel_attach()`) to indicate that it shouldn't
generally allow PCI devices to be attached that way (and probably isn't
needed at all for PCI-only Comedi drivers). Add code to the `detach()`
hook (`skel_detach()`) to disable PCI devices enabled by the
`auto_attach()` hook.
`skel_auto_attach()` calls new function `skel_find_pci_board()` to find
a matching element in `skel_boards[]`. PCI device ID information has
been added to `skel_boards[]` to give the function something to look
for.
Remove the `pci_dev` member of `struct skel_private` as drivers now use
the `hw_dev` member of `struct comedi_device` to get at the PCI device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Thu, 1 Nov 2012 14:02:13 +0000 (14:02 +0000)]
staging: comedi: skel: remove thisboard macro
This driver's `thisboard` macro relies on a local variable having a
specific name. Replace it with a local variable of the same name in the
functions that use it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the PCI bus walking has been removed from the addi-data
drivers, the only differenced between addi_amcc_s9533.h and the
standard comedi amcc_s5933.h is the additional defines for the
apci3120 "ADDON RELATED ADDITIONS". Move those defines to
hwdrv_apci3120.c.
Modify all the addi-data drivers to then include the standard
comedi amcc_s5933.h header and delete the duplicate in addi-data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: remove 'b_ValidDriver' from the private data
This variable is only used in the detach of the addi-data boards to
indicate that the attach of the board was successful and that the reset
function can be called. We can use the dev->iobase variable to indicate
this instead. Once this variable is set the attach always completes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: remove 'allocated' from the private data
This variable is only used as a flag to indicate that the pci device
has been enabled. Use the comedi_device 'iobase' variable to indicate
this instead. This is how it's normally handled in the comedi pci
drivers.
Make the call to comedi_pci_disabled() in i_ADDI_Detach() common
and move it to the end of the function. Both the if and else case
require it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: use attach_pci callback
Use the comedi pci auto config mechanism to attach the addi-data
drivers. This allows removing all the PCI bus walking code.
Add a function, addi_find_boardinfo(), to find the driver specific
boardinfo. Since this function is currently in the common code we
have to use the pointer to the boardinfo that is stored in the
comedi_driver pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function calls comedi_pci_disable() to disable the pci
device when detached. It's only called from i_ADDI_Detach().
Move the code there and delete the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: remove attach option to disable dma
This pci driver currently uses the comedi legacy attach mechanism
which allows the user to pass configuration options to the driver
when it is attached to the comedi subsystem. The use of these
configuration options is preventing the conversion of the addi-data
drivers to the comedi auto attach mechanism.
For the addi-data drivers, option[2] is used to enable/disable dma.
The default (0) action is to enable dma is the driver supports it.
Remove this configuration option and just enable dma if it is
supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: absorb pci_card_alloc() into i_ADDI_Attach()
The function pci_card_alloc() enables the pci device by calling
comedi_pci_enable() and then optionally calls pci_set_master() to
enable bus mastering for DMA.
Absorb this code directly into i_ADDI_Attach() as is more typical
for comedi PCI drivers. Also, remove the now unused i_Master
parameter from ptr_select_and_alloc_pci_card().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: remove io_addr array from card data
The io_addr array in the card data holds the PCI bar base addresses
returned by pci_resource_start(). Remove this array and just use
pci_resource_start() where needed in i_ADDI_Attach().
This also allows getting rid of i_pci_card_data() since it now
does nothing.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: remove irq parameter from i_pci_card_data()
The irq parameter passed to i_pci_card_data() is used to get the pci_dev
irq that is cached in the card data. This information can easily be found
when needed in i_ADDI_Attach() from the 'card' pointer to the card data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: remove unused parameters from i_pci_card_data()
The pci_bus, pci_slot, and pci_func data returned by i_pci_card_data()
are not used. Remove them from the parameters to the function and also
remove the local variables in i_ADDI_Attach() that held the returned
data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull the module init code out of addi_common.c and add it to
each addi-data driver. Rename the data and functions so they
have namespace associated with the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This source file is #include'd when building the addi_apci_3200 and
addi_apci_3300 driver. All the functions in this file are actually
static and should not be exported to the kernel.
Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.
Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.
Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.
Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This source file is #include'd when building the addi_apci_1710 driver.
All the functions in this file are actually static and should not be
exported to the kernel.
Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This source file is #include'd when building the addi_apci_3001 and
addi_apci_3120 drivers. All the functions in this file are actually
static and should not be exported to the kernel.
Move some of the functions to remove the need for the forward declarations
and make all of the functions in this file static. Note, this patch does
not try to fix any of the coding style issues in the functions.
Also, remove most of the big comment blocks preceding each function.
Leave the 'task' information for some of them to assist in later cleanup.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaotian Feng [Wed, 31 Oct 2012 10:56:48 +0000 (18:56 +0800)]
staging: ozwpan: use tasklet_kill in device remove/release process
Some driver uses tasklet_disable in device remove/release process,
tasklet_disable will inc tasklet->count and return. If the tasklet
is not handled yet under some softirq pressure, the tasklet will be
placed on the tasklet_vec, never have a chance to be excuted. This might
lead to a heavy loaded ksoftirqd, wakeup with pending_softirq, but
tasklet is disabled. tasklet_kill should be used in this case.
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: Rupesh Gujare <rgujare@ozmodevices.com> Cc: Chris Kelly <ckelly@ozmodevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 31 Oct 2012 11:56:23 +0000 (11:56 +0000)]
staging: comedi: rtd520: use auto_attach instead of attach_pci
Change the rtd520 driver to use the new `auto_attach()` method in
`struct comedi_driver` instead of the `attach_pci()` method. I plan to
remove the `attach_pci()` and `attach_usb()` methods once nothing is
using them.
Tag the new `rtd520_auto_attach()` function definition with `__devinit`
as it is only called during PCI probe.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: zram: factor-out zram_decompress_page() function
zram_bvec_read() shared decompress functionality with zram_read_before_write() function.
Factor-out and make commonly used zram_decompress_page() function, which also simplified
error handling in zram_bvec_read().
Kevin McKinney [Wed, 31 Oct 2012 01:50:43 +0000 (21:50 -0400)]
Staging: bcm: Remove typedef for stLocalSFAddIndicationAlt and call directly.
This patch removes typedef for
stLocalSFAddIndicationAlt, changes the
name of the struct to bcm_add_indication_alt,
and removes a comment. In addition, any
calls to typedef stLocalSFAddIndicationAlt
are changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devendra Naga [Tue, 30 Oct 2012 19:18:40 +0000 (15:18 -0400)]
staging: csr: os.c: remove col variable
theres no point in checking the col variable,
its always zero, and wont print a new line, actually
its better to have a new line after a set of characters
printed, instead of confusing with the concatenated
characters when called multiple times at a time.
The PHY registers are now being controlled from the connected phydev,
so there shouldn't be any reason for the et131x code to perform any
extra setup. Removing the interrupt setup code, and register defines
that are now unused.
On testing, no changes in behaviour were experienced.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During a previous refactoring excerise, two NULL pointer assingments
were moved to their respective pointer declarations. Dan Carpenter
correctly points out that these assignments are not needed.
Removing them.
Also two small whitespace changes - rejoining split lines, as they are
now less than 80 chars.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Tue, 30 Oct 2012 18:38:55 +0000 (18:38 +0000)]
staging: et131x: Refactor nic_rx_pkts() to remove indenting
In nic_rx_pkts() some large chunks of code are indented in 'if (len)'
sections. Refactor the code to remove these indents and re-join longer
split lines.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 30 Oct 2012 13:30:04 +0000 (13:30 +0000)]
staging: comedi/drivers: use auto_attach instead of attach_pci
Change comedi drivers for PCI boards to use the new `auto_attach()`
method instead of the `attach_pci()` method. I plan to remove the
`attach_pci()` and `attach_usb()` methods from `struct comedi_driver`
once nothing is using them.
Tag the functions with `__devinit` where they are not already so tagged,
as they are only called during PCI probe.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / karo-tx-linux.git / log