_ReadLEDSetting() doesn't read led settings this function actually
initialize member variables of struct led_priv, we should do that
inside rtl8188eu_InitSwLeds().
staging: rtl8188eu: fix spaces instead of tabs for rtw_p2p.c
This commit fixes the following checkpatch errors:
rtl8188eu/core/rtw_p2p.c
- 1508: ERROR: code indent should use tabs where possible
- 1509: ERROR: code indent should use tabs where possible
- 1510: ERROR: code indent should use tabs where possible
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Sat, 19 Apr 2014 14:35:49 +0000 (15:35 +0100)]
staging: rtl8821ae: Fix indetentation of switch case statements
Fixes checkpatch error:
ERROR: switch and case should be at the same indent
+ switch (coex_dm->cur_retrylimit_type) {
+ case 0: /* normal mode */
[...]
+ case 1: /* retry limit=8 */
[...]
+ default:
Signed-off-by: Mark Einon <mark@einon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Einon [Sat, 19 Apr 2014 14:35:45 +0000 (15:35 +0100)]
staging: rtl8821ae: Fix halbtc8192e2ant.c 'defined but not used' sparse warnings
Sparse complains about halbtc8192e2ant_low_penalty_ra() not being used,
and subsequently halbtc8192e2ant_set_sw_penalty_tx_rateadaptive() when
this is removed. remove both functions.
Signed-off-by: Mark Einon <mark@einon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The symbol 'r8192_get_wireless_stats' is declared as 'extern'
but it is only used in the local scope. The declaration is deleted
of rtl_wx.h, fixing the conflict with the 'extern' and 'static' scope.
The symbol 'r8192_wx_handlers_def' was fixed of some issues related
to variable declaration marked as 'extern' implicitly,
causing this sparse warning:
drivers/staging/rtl8192e/rtl8192e/rtl_wx.c:1323:24: warning: symbol
'r8192_wx_handlers_def' was not declared. Should it be static?
Resolved incluing the fixed header to rtl_wx.c
Also, isn't declared as constant variable, so it declared as such.
And delete unnecessary cast in rtl_core.c.
Signed-off-by: Joel Pelaez Jorge <joelpelaez@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 7 Apr 2014 06:31:21 +0000 (09:31 +0300)]
Staging: rtl8188eu: overflow in update_sta_support_rate()
The ->SupportedRates[] array has NDIS_802_11_LENGTH_RATES_EX (16)
elements. Since "ie_len" comes from then network and can go up to 255
then it means we should add a range check to prevent memory corruption.
Fixes: d6846af679e0 ('staging: r8188eu: Add files for new driver - part 7') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some code is hide inside #ifdef BP_PROC_SUPPORT and it never defined
anywhere. And, it made defined but not used function which calling
code was hide inside #ifdef BP_PROC_SUPPORT and caused following
build warning:
drivers/staging/silicom/bpctl_mod.c:6786:12: warning:
‘bp_proc_create’ defined but not used [-Wunused-function]
static int bp_proc_create(void)
^
Fix the warning and remove code complexity by remove whole code
inside #ifdef BP_PROC_SUPPORT.
Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Staging: lustre: ops structs should be declared static
Fixed the following sparse complaints:
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:549:22:
warning: symbol 'ldlm_srv_pool_ops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:555:22:
warning: symbol 'ldlm_cli_pool_ops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:681:1:
warning: symbol 'lprocfs_pool_state_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:697:1:
warning: symbol 'lprocfs_grant_plan_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:700:1:
warning: symbol 'lprocfs_wr_recalc_period' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:708:1:
warning: symbol 'lprocfs_recalc_period_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:710:1:
warning: symbol 'ldlm_pool_u64_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:711:1:
warning: symbol 'ldlm_pool_atomic_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:712:1:
warning: symbol 'ldlm_pool_rw_atomic_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:714:1:
warning: symbol 'lprocfs_grant_speed_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:755:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:757:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:758:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:759:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:760:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:762:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:764:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:765:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:766:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:768:9:
warning: Using plain integer as NULL pointer
Dan Carpenter [Thu, 24 Apr 2014 21:49:13 +0000 (00:49 +0300)]
staging: lustre: improve length checks in ioctls
We copy "hdr->ioc_len" from the user twice but we only verify that it's
within the limit on the first copy. Otherwise we could read unmapped
memory and Oops.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helper function is called by the ai (*do_cmd) to setup and
start the async command based on the "mode" of operation. This
"mode" is determined by the cmd convert_src and start_src.
Move this "mode" determination and combine the functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adv_pci1710: remove 'ai_timer1' from private data
This member of the private data is just a copy of the cmd->convert_arg.
Use that instead and remove the unnecessary sanity checking since it
was already validated in the (*do_cmdtest).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: separate from addi_common.c
Using the addi-data "common" code in addi_apci_1564 introduces a lot of
bloat. By separating this driver off from addi_common.c, a lot of the
common code can be stripped out. This patch copies the code over from
addi_common.c, and removes the #include of the file. The auto_attach
function from the common code replaces the one that was previously in this
driver, though renamed to that it stays within the namespace associated
with this driver, and the detach function has been renamed for this reason
as well.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_pci224: only calc the pacer divisors once
When the cmd->scan_begin_src == TRIG_TIMER the divisors needed to
generate the pacer time are calculated in the (*do_cmdtest) to
validate the cmd->scan_begin_arg. The core always does the
(*do_cmdtest) before the (*do_cmd) so there is no reason to recalc
the divisors.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas64: remove unnecessary Step 2b test in (*do_cmdtest)
This test is unnecessary. The cfc_check_trigger_src() in Step 1 ensures that
the trigger source is one of these values and Step 2 makes sure it's only one
of these values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Monam Agarwal [Sun, 23 Mar 2014 18:38:22 +0000 (00:08 +0530)]
drivers/staging: Use RCU_INIT_POINTER(x, NULL) in fwserial/fwserial.c
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)
The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
fwserial: (coding style) removing FSF postal address
Style-only modifications to make checkpatch.pl --file --strict a bit happier.
Removing FSF postal address from file top comment since it has changed in the
past, as stated by checkpatch.pl.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Style-only modifications to make checkpatch.pl --file --strict a bit happier.
Removed useless "extern" in dma_fifo.h ;
Removed one supernumerary space.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Style-only modifications to make checkpatch.pl --file --strict a bit happier.
if/else bracket matching (either none or both options should be bracketed).
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbduxfast: fix the cmd->start_arg validation and use
This driver supports cmd->start_src values of TRIG_NOW, TRIG_EXT, and
TRIG_INT. Currently the cmd->start_arg is only validated for TRIG_NOW.
For TRIG_EXT sources, the cmd->start_src is driver specific. For a
TRIG_INT source, the cmd->start_arg is actually the valid trig_num
that is used by the async (*inttrig) callback.
The cmd->start_arg is currently not use in the driver. Just trivially
validate it to be 0 for all cmd->start_src values.
Refactor the (*inttrig) function so that the cmd->start_arg is used
to check the trig_num instead of the open coded value.
For aesthetics, remove some unnecessary comments in the (*do_cmd)
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: usbduxsigma: fix the ai/ao cmd->start_arg use for TRIG_INT
For both ai and ao commands this driver supports a cmd->start_src of
TRIG_NOW or TRIG_INT. The cmd->start_arg is trivially validated for
both sources to be 0.
For a TRIG_INT source, the cmd->start_arg is actually the valid
trig_num that is used by the async (*inttrig) callback.
Refactor the (*inttrig) functions so that the cmd->start_arg is used
to check the trig_num instead of the open coded values.
For aesthetics, remove some unnecessary comments in the (*do_cmd)
functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc: clarify the cmd->start_arg validation
This driver supports cmd->start_src sources of TRIG_NOW and TRIG_EXT.
Refactor the (*do_cmdtest) to clarify the trivial validation of the
cmd->start_arg.
This also fixes a bug, the cmd->start_src has the trigger not the
cmd->start_arg.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_tiocmd: clarify the cmd->start_arg validation and use
This driver supportes cmd->start_src sources of TRIG_NOW, TRIG_INT, TRIG_OTHER,
and TRIG_EXT. Refactor the (*do_cmdtest) to clarify the trivial validation of
the cmd->start_arg. For a TRIG_INT source, the cmd->start_arg is actually the
valid trig_num that is passed to the async (*inttrig) callback.
Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_pcidio: fix the cmd->start_arg use for TRIG_INT
This driver only a cmd->start_src of TRIG_NOW or TRIG_INT. The cmd->start_arg
is trivially validated for both sources to be 0. For a TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.
Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: fix the ao cmd->start_arg use for TRIG_INT
This driver only supports a cmd->start_src of TRIG_INT for ao commands. The
cmd->start_arg is trivially validated to be 0. For TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.
Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas64: validate the ai/ao cmd->start_arg
The cmd->start_arg should be trivially validated in Step 3 of the
(*do_cmdtest) functions. Add the necessary code.
For the analog output, a cmd->start_src of TRIG_NOW and TRIG_INT is
supported. For both sources the cmd->start_arg is validated to be 0.
For a TRIG_INT source, the cmd->start_Arg is actually the valid trig_num
that is passed to the async (*inttrig) callback.
Refactor the (*inttrig) function so that the cmd->start_arg is used to
check the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: fix the ao cmd->start_arg use for TRIG_INT
This driver only supports a cmd->start_src of TRIG_INT for ai commands. The
cmd->start_arg is trivially validated to be 0. For TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.
Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_pci230: fix the ai/ao cmd->start_arg use for TRIG_INT
This driver trivially validates the cmd->start_arg for all cmd->start_src values
to be 0. For TRIG_INT source, the cmd->start_arg is actually the valid trig_num
that is passed to the async (*inttrig) callback.
Refactor the (*inttrig) functions so that the cmd->start_arg is used to check the
trig_num instead of the open coded values.
For aesthetics, refactor the ai (*do_cmd) to remove some unnecessary {}.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_pci224: fix the ao cmd->start_arg use
This driver supports two cmd->start_src values, TRIG_INT and TRIG_EXT. For
TRIG_INT sources, the cmd->start_arg is actually the valid trig_num that is
passed to the async (*inttrig) callback. This driver trivially validates the
arg for this source to be 0.
Refactor the (*inttrig) so that the cmd->start_arg is used to check the trig_num
instead of the open coded value.
For aesthetics, refactor the (*do_cmd) to use if/else instead of the switch when
handling the cmd->start_src. All code paths do the spin lock/unlock so move those
out of the if/else.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_dio200_common: fix the cmd->start_arg use
This driver supports two cmd->start_src values, TRIG_NOW and TRIG_INT. TRIG_NOW
sources should always have an arg of 0. For TRIG_INT sources, the cmd->start_arg
is actually the valid trig_num that is passed to the async (*inttrig) callback.
This driver trivially validates the arg for both sources to be 0.
Refactor the (*inttrig) so that the cmd->start_arg is used to check the trig_num
instead of the open coded value.
For aesthetics, refactor the (*do_cmd) to use if/else instead of the switch when
handling the cmd->start_src.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci9118: fix the ai cmd->start_arg validation and use
This driver supports three cmd->start_src values, TRIG_NOW, TRIG_EXT, and
TRIG_INT. TRIG_NOW sources should always have an arg of 0 and arg for TRIG_EXT
sources is driver specific. This driver does not use the cmd->start_arg with
the TRIG_EXT source so a trivial value of 0 is good.
When the cmd->start_src is TRIG_INT the cmd->start_arg is actually the valid
trig_num that is passed to the async (*inttrig) callback. This driver allows
any value to be used and currently carries that value in the private data.
Refactor the (*do_cmdtest) so that the trivial validation of the cmd->start_arg
is clear.
Refactor the (*inttrig) so that the cmd->start_arg is used directly to check
the trig_num and remove the then unused 'ai_inttrig_start' member from the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci3200: properly validata the ai cmd->start_arg
The async command 'arguments' should be trivially validated in Step 3 of
the (*do_cmdtest) not Step 2b. Move the validataion in this driver to the
proper place.
This driver supports two cmd->start_src values, TRIG_NOW and TRIG_EXT.
TRIG_NOW sources should always have an arg of 0. The arg for TRIG_EXT
sources is driver specific.
Properly validate the cmd->start_arg based on the cmd->start_src. Remove
the noise when the arg is invalid and modify the cmd->start_arg so that
a valid value is returned to the user.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: comedi_test: ao subdevice does not support async commands
The comedi_subdevices array is kzalloc()'d so the async command callbacks do
not need to be set to NULL when the analog output subdevice is initialized.
Also, remove the initialzation of the subdevice 'len_chanlist' since this
value is only used by the async commands. The core will default it to 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3xxx: fix ai subdevice 'len_chanlist'
Due to a driver limitation, the (*do_cmdtest) for the analog input subdevice
overrides the cmd->chanlist_len to force single channel chanlists. But, the
cmd->scan_end_arg was already validated before this happens. Instead of
fixing the (*do_cmdtest) just set the subdevice len_chanlist to 1 to limit
the chanlist size. Move the comment also.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the async command 'scan_end_src' is TRIG_COUNT the 'scan_end_arg'
is the cmd->chanlist_len. Fix a couple open-coded drivers. Add the
check to the drivers that do not validate this command argument.
The core validates that the cmd->chanlist_len is <= s->len_chanlist.
During the post config after the attach the core also make sure that
the s->len_chanlist is initialized. For clarity, initialize the
s->len_chanlist in a couple drivers that are relying on the core to
initialize it to '1'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: drivers: core validates chanlist_len max
The comedi core checks if the (cmd->chanlist_len > s->len_chanlist) when the
comedi_cmd is copied from user to kernel space by __comedi_get_user_cmd().
If so, the core returns -EINVAL and will not call the subdevice (*do_cmdtest)
and (*do_cmd).
Remove the unnecessary "max" checks in the comedi driver (*do_cmdtest) and
helper functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log