Amir Shehata [Mon, 22 Feb 2016 22:29:13 +0000 (17:29 -0500)]
staging: lustre: reject invalid net configuration for lnet
Currently if there exists a route that goes over a
remote net and then this net is added dynamically as
a local net, then traffic stops because the code in
lnet_send() determines that the destination nid
can be reached from another local_ni, but the src_nid
is still stuck on the earlier NI, because the src_nid
is stored in the ptlrpc layer and is not updated
when a local NI is configured.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5874
Reviewed-on: http://review.whamcloud.com/12912 Reviewed-by: Isaac Huang <he.huang@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With DLC it's possible to start up a system with no NIs that require
the acceptor thread, and thus it won't start. Later on the user
can add an NI that requires the acceptor thread to start, it is
then necessary to start it up.
If the user removes a NI and as a result there are no more
NIs that require the acceptor thread then it should be stopped.
This patch adds logic in the dynamically adding and removing NIs
code to ensure the above logic is implemented.
Frank Zago [Mon, 22 Feb 2016 22:29:11 +0000 (17:29 -0500)]
staging: lustre: missed a few cases of using NULL instead of 0
It is preferable to use NULL instead of 0 for pointers. This fixes sparse
warnings such as:
lustre/fld/fld_request.c:126:17: warning: Using plain integer as NULL pointer
The second parameter of class_match_param() was changed to a const, to
be able to remove a cast in one user, to prevent splitting a long
line. No other code change.
Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/12567 Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Zago [Mon, 22 Feb 2016 22:29:10 +0000 (17:29 -0500)]
staging: lustre: make some lnet functions static
Some functions and variables are only used in their C file, so reduce
their scope. This reduces the code size, and fixes sparse warnings
such as:
warning: symbol 'proc_lnet_routes' was not declared.
Should it be static?
warning: symbol 'proc_lnet_routers' was not declared.
Should it be static?
Some prototypes were removed from C files and added to the proper
header.
Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/12206 Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Mon, 22 Feb 2016 22:29:09 +0000 (17:29 -0500)]
staging: lustre: return appropriate errno when adding route
When adding route it ignored specific scenarios, namely:
1. route already exists
2. route is on a local net
3. route is unreacheable
This patch returns the appropriate return codes from the lower level
function lnet_add_route(), and then ignores the above case from the
calling function, lnet_parse_route(). This is needed so we don't
halt processing routes in the module parameters.
However, we can now add routes dynamically, and it should be returned
to the user whether adding the requested route succeeded or failed.
In userspace it is determined whether to continue adding routes or to
halt processing. Currently "lnetctl import < config" continues
adding the rest of the configuration and reports at the end which
operations passed and which ones failed.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6045
Reviewed-on: http://review.whamcloud.com/13116 Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Mon, 22 Feb 2016 22:29:08 +0000 (17:29 -0500)]
staging: lustre: improve LNet clean up code and API
This patch addresses a set of related issues: LU-5568, LU-5734,
LU-5839, LU-5849, LU-5850.
Create the local lnet_startup_lndni() API. This function starts
up one LND. lnet_startup_lndnis() calls this function in a loop
on every ni in the list passed in. lnet_startup_lndni() is
responsible for cleaning up after itself in case of failure.
It calls lnet_free_ni() if the ni fails to start. It calls
lnet_shutdown_lndni() if it successfully called the
lnd startup function, but fails later on.
lnet_startup_lndnis() also cleans up after itself.
If lnet_startup_lndni() fails then lnet_shutdown_lndnis() is
called to clean up all nis that might have been
started, and then free the rest of the nis on the list
which have not been started yet.
To facilitate the above changes lnet_dyn_del_ni() now
manages the ping info. It calls lnet_shutdown_lndni(),
to shutdown the NI. lnet_shutdown_lndni() is no longer
an exposed API and doesn't manage the ping info, making
it callable from lnet_startup_lndni() as well.
There are two scenarios for calling lnet_startup_lndni()
1. from lnet_startup_lndnis()
If lnet_startup_lndni() fails it requires to shutdown the ni
without doing anything with the ping information as it hasn't
been created yet.
2. from lnet_dyn_add_ni()
As above it will shutdown the ni, and then lnet_dyn_add_ni() will
take care of managing the ping info
The second part of this change is to ensure that the LOLND is not
added by lnet_parse_networks(), but the caller which needs to do
it (IE: LNetNIInit)
This change ensures that lnet_dyn_add_ni() need only check if there is
only one net that's being added, if not then it frees everything,
otherwise it proceeds to startup the requested net.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5734
Reviewed-on: http://review.whamcloud.com/12658 Reviewed-by: Liang Zhen <liang.zhen@intel.com> Reviewed-by: Isaac Huang <he.huang@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Mon, 22 Feb 2016 22:29:07 +0000 (17:29 -0500)]
staging: lustre: remove LUSTRE_{,SRV_}LNET_PID
Remove LUSTRE_LNET_PID (12354) and LUSTRE_SRV_LNET_PID (12345) from
the libcfs headers and replace their uses with a new macro
LNET_PID_LUSTRE (also 12345) in lnet/types.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11985 Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Mon, 22 Feb 2016 22:29:05 +0000 (17:29 -0500)]
staging: lustre: DLC user/kernel space glue code
This is the sixth patch of a set of patches that enables DLC.
This patch enables the user space to call into the kernel space
DLC code. Added handlers in the LNetCtl function to call
the new functions added for Dynamic Lnet Configuration
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
ntel-bug-id: https://jira.hpdd.intel.com/browse/LU-2456
Reviewed-on: http://review.whamcloud.com/8023 Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Mon, 22 Feb 2016 22:29:04 +0000 (17:29 -0500)]
staging: lustre: fix crash due to NULL networks string
If there is an invalid networks or ip2nets lnet_parse_networks()
gets called with a NULL 'network' string parameter
lnet_parse_networks() needs to sanitize its input string now that
it's being called from multiple places. Instead, check for
a NULL string everytime the function is called, which reduces the
probability of errors with other code modifications.
Amir Shehata [Mon, 22 Feb 2016 22:29:03 +0000 (17:29 -0500)]
staging: lustre: Dynamic LNet Configuration (DLC) show command
This is the fifth patch of a set of patches that enables DLC.
This patch adds the new structures which will be used
in the IOCTL communication. It also added a set of
show operations to show buffers, networks, statistics
and peer information.
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2456
Reviewed-on: http://review.whamcloud.com/8022 Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the fourth patch of a set of patches that enables DLC.
This patch changes the IOCTL infrastructure in preparation of
adding extra IOCTL communication between user and kernel space.
The changes include:
- adding a common header to be passed to ioctl infra functions
instead of passing an exact structure. This header is meant
to be included in all structures to be passed through that
interface. The IOCTL handler casts this header to a particular
type that it expects
- All sanity testing on the past in structure is performed in the
generic ioctl infrastructure code.
- All ioctl handlers changed to take the header instead of a
particular structure type
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2456
Reviewed-on: http://review.whamcloud.com/8021 Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by: James Simmons <uja.ornl@gmail.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes linux_wlan_common.h file and also removes the following
preprocessor at files that include it:
- #include 'linux_wlan_common.h'
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:41:18 +0000 (13:41 +0900)]
staging: wilc1000: remove useless define in linux_wlan_common.h file
This patch removes useless define in linux_wlan_common.h file
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:41:17 +0000 (13:41 +0900)]
staging: wilc1000: move MODALIS and GPIO_NUM define to wilc_wlan.h file
This patch moves MODALIS and GPIO_NUM define to wilc_wlan.h file.
MODALIS and GPIO_NUM define are used to two files (wilc_sdio.c,
wilc_spi.c), these files already include wilc_wlan.h file in common.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:41:16 +0000 (13:41 +0900)]
staging: wilc1000: move WILC_MULTICAST_TABLE_SIZE define to wilc_wlan_if.h file
This patch moves WILC_MULTICAST_TABLE_SIZE define to wilc_wlan_if.h file.
This define is used to three files(host_interface.c,host_interface.h,
linux_wlan.c) these files already include wilc_wlan_if.h file in common.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the argument of the wilc_wlan_cfg_init function,
wilc_debug to void type because wilc_debug function is not used any more.
In addition, finally removes wilc_debug and related variables.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leo Kim [Mon, 22 Feb 2016 04:41:14 +0000 (13:41 +0900)]
staging: wilc1000: removes unnecessary variable of wilc_mac_cfg_t structure
This patch removes unnecessary variable of wilc_mac_cfg_t structure.
The variable is debug print function pointer.
Removes all what used this variable.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary wilc_debug print log.
The print log was written when if condition fail.
The condition is chip-id check function.
Also, replaces this condition with normal function.
Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves LINUX_RX_SIZE and LINUX_TX_SIZE to wilc_wlan.h file
because there are only used to wilc_wlan.c file.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:12:08 +0000 (13:12 +0900)]
staging: wilc1000: moves to define values
This patch moves DEBUG, INFO, WRN and ERR values to wilc_debugfs.c file
because this is only used to wilc_debugfs.c file.
And, removes unnecessary WILC_DEBUGFS and else-case variables.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unused PRINT_XX(region...)
because already removed in used to region feature of whole wilc source.
Also, removes unnecessary related region extern variable.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:12:06 +0000 (13:12 +0900)]
staging: wilc1000: removes unused region feature
This patch removes unused region feature on debug message.
Also, removes the functions of related in this feature.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:12:02 +0000 (13:12 +0900)]
staging: wilc1000: host_interface.c: replace PRINT_ER with netdev_err
This patch replaces PRINT_ER with netdev_err.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:59 +0000 (13:11 +0900)]
staging: wilc1000: removes unused CFG80211_DBG tag
This patch removes unused CFG80211_DBG tag.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary log messages.
And, it adds a 'break' statement in accordance with the switch-case rule.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary log messages and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary log message and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:55 +0000 (13:11 +0900)]
staging: wilc1000: removes unused HOSTAPD_DBG tag
This patch removes unused HOSTAPD_DBG tag.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unnecessary log messages which is used with
the HOSTAPD_DBG tag.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Park [Mon, 22 Feb 2016 04:11:53 +0000 (13:11 +0900)]
staging: wilc1000: linux_mon.c: removes comments
This patch removes unnecessary comments.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary log message and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary log message and relate variables.
Signed-off-by: Chris Park <chris.park@atmel.com> Signed-off-by: Leo Kim <leo.kim@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Ren [Mon, 15 Feb 2016 18:58:48 +0000 (10:58 -0800)]
Staging: rts5208: rtsx_transport.c: Align to open parenthesis
This patch fixes the alignment issue reported by checkpatch.pl:
CHECK: Alignment should match open parenthesis
Add a unsigned char *sgbuffer in rtsx_stor_access_xfer_buffer to make the
following memcpy logic easier to read.
Add a struct scatterlist *sg in the use_sg branch of
rtsx_transfer_data_partial to make the parameters of the
rtsx_transfer_sglist_adma_partial call fit in 80 character lines after
aligning them to the open parenthesis.
Refactor memcpy logic in rtsx_stor_access_xfer_buf to make it more legible.
This patch fixes all multiline comments to conform to the coding style,
which states that multiline comments should start with "/*" and end
with "*/" on a separate line.
Also cleans up some comments to make them more clear and/or reflect what
the code is doing.
Ian Abbott [Fri, 19 Feb 2016 16:13:57 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: terminate "write" command when stopped
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the current
position. An asynchronous command in the "read" direction is terminated
automatically once it has stopped and information about the final
position and error has been reported back to the user. That is not
currently done for commands in the "write" direction. Change it to
terminate the command in the "write" direction automatically. If the
command stopped with an error, report an `EPIPE` error back to the user,
otherwise just report the final buffer position back to the user.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:56 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: return -EPIPE for abnormal read
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the current
position. If an asynchronous command in the "read" direction has
stopped normally, the command is terminated as soon as the position has
been advanced to the end of all available data. This is not currently
done if the command terminated with an error. Change it to allow the
command to be terminated even if it stopped with an error, but report an
`EPIPE` error to the user first. The `EPIPE` error will not be
reported until the "read" position reported back to the user has been
advanced to the end of all available data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:55 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: become non-busy even if bytes_read is 0
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specified the amount to advance the "read" position for an asynchronous
command in the "read" direction. If the command has already stopped
normally, and the "read" position has been advanced to the end of all
available data, the command is terminated by calling
`do_become_nonbusy()`. (That is not currently done if the command
stopped with an error.) Currently, the command is only terminated if
the user is trying to advance the "read" position by a non-zero amount.
Change it to allow the command to be terminated even if the user is not
trying to advance the "read" position. This is justifiable, as the only
time a command stops without error is when it has been set up to read a
finite amount of data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:54 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: return error if no active command
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer and/or get the current buffer position. If no asynchronous
command is active (started via the file object that issued this ioctl),
this information is meaningless. Change it to return an error
(`-EINVAL`) in this case. Prior to this change, if a command was
started via a different file object, the ioctl returned `-EACCES`, but
now it will return `-EINVAL`, which is consistent with the current
behavior of the "read" and "write" file operation handlers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:53 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: force bytes_written to 0 if stopped
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_written` member of `struct
comedi_bufinfo` specifies the amount to advance the "write" position for
an asynchronous command in the "write" direction. On output, the member
indicates the amount the "write" position has actually been advanced.
Advancing the "write" position is current done even if the command has
stopped and cannot use any more written data. Change it to force the
amount successfully written to 0 in that case.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:52 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: update buffer before becoming non-busy
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. For an asynchronous command in the "read" direction, if the
command has finished acquiring data normally, `do_become_nonbusy()` is
called to terminate the command. That resets the buffer position, and
currently, the position information returned back to the user is after
the buffer has been reset. It should be more useful to return the
buffer position before the reset, so move the call to
`do_become_nonbusy()` after the code that gets the updated buffer
position.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:51 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: force bytes_read or bytes_written to 0
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specifies the amount to advance the "read" position for an asynchronous
command in the "read" direction, and the `bytes_written` member
specifies the amount to advance the "write" position for a command in
the "write" direction. The handler `do_bufinfo_ioctl()` may adjust
these by the amount the position is actually advanced before copying
them back to the user. Currently, it ignores the specified `bytes_read`
value for a command in the "write" direction, and ignores the specified
`bytes_written` for a command in the "read" direction, so the values
copied back to the user are unchanged. Change it to force the ignored
value to 0 before copying the values back to the user.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 19 Feb 2016 16:13:50 +0000 (16:13 +0000)]
staging: comedi: COMEDI_BUFINFO: get amount freed, not amount allocated
The `COMEDI_BUFINFO` ioctl is used to advance the current position in
the buffer by a specified amount (which can be 0) and get the new
position. On input, the `bytes_read` member of `struct comedi_bufinfo`
specifies the amount to advance the "read" position for an asynchronous
command in the "read" direction, and the `bytes_written` member
specifies the amount to advance the "write" position for a command in
the "write" direction. The handler `do_bufinfo_ioctl()` may limit the
specified values according to amount of readable or writable space in
the buffer. On output, the `struct comedi_bufinfo` is filled in with
the updated position information, along with the adjusted `bytes_read`
and `bytes_written` members.
Advancing the buffer position occurs in two steps: first, some buffer
space is allocated, and second, it is freed, advancing the current
"read" or "write" position. Currently, `do_bufinfo_ioctl()` limits
`bytes_read` or `bytes_written` to the amount it could allocate in the
first step, but that is invisible and irrelevant to the ioctl user.
It's mostly irrelevant to the COMEDI internals as well, apart from
limiting how much can be freed in the second step. Change it to ignore
how much it managed to allocate in the first step and just use the
amount that was actually freed in the second step, which is the amount
the current buffer position was actually moved by this ioctl call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 17 Feb 2016 08:32:58 +0000 (09:32 +0100)]
staging: rtl8712: reduce stack usage
The "translate_scan" function in rtl8712 uses a lot of stack, and
gets inlined into its single caller, r8711_wx_get_scan, which
in some configurations now blows the 1024 byte stack warning
limit:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'r8711_wx_get_scan':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1227:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This somewhat reduces the stack usage by moving the translate_scan
function out of line with the noinline_for_stack annotation.
It might be possible to modify translate_scan() a little further
to reduce the stack usage, but with this patch, we can build without
the warning, the the call chain to get here is rather predictable
(sys_ioctl->vfs_ioctl->sock_ioctl->dev_ioctl->wext_ioctl->
r8711_wx_get_scan).
Fix a driver hang caused by earlier suspend/resume cycles. By handling a
ENODEV error during suspend as a real error we eventually end up stopping
the whole driver.
Fix this by handling the ENODEV error (during suspend) essentially by
retrying.
Bhumika Goyal [Thu, 18 Feb 2016 05:49:38 +0000 (11:19 +0530)]
Staging: fsl-mc: bus: Drop owner assignment from platform_driver
For platform_driver, we don't need to set .owner field as is set by
platform driver core. The semantic patch used here first checks whether
platform_driver struct was actually used in a call to set the .owner
field.
The coccinelle script that generated the patch can be found here:
http://www.spinics.net/lists/kernel/msg2029903.html
projects / linux-beck.git / log