K. Y. Srinivasan [Thu, 16 Jun 2011 20:16:35 +0000 (13:16 -0700)]
Staging: hv: netvsc: Increase the timeout value in the netvsc driver
On some loaded windows hosts, we have discovered that the host may not
respond to guest requests within the specified time (one second)
as evidenced by the guest timing out. Fix this problem by increasing
the timeout to 5 seconds.
It may be useful to apply this patch to the 3.0 kernel as well.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Thu, 16 Jun 2011 20:16:34 +0000 (13:16 -0700)]
Staging: hv: vmbus: Increase the timeout value in the vmbus driver
On some loaded windows hosts, we have discovered that the host may not
respond to guest requests within the specified time (one second)
as evidenced by the guest timing out. Fix this problem by increasing
the timeout to 5 seconds.
It may be useful to apply this patch to the 3.0 kernel as well.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kalle Valo [Thu, 30 Jun 2011 08:41:26 +0000 (11:41 +0300)]
staging: remove reference to cs5535_gpio makefile
The driver was removed but 'make clean' still failed:
scripts/Makefile.clean:17:
[...]/drivers/staging/cs5535_gpio/Makefile: No such file or directory
make[3]: *** No rule to make target
`[...]/drivers/staging/cs5535_gpio/Makefile'. Stop.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:42:53 +0000 (15:42 +0100)]
gma500: the MMU code is also generic
Move this over. In actual fact there are some underlying differences as
some devices have more MMU contexts, but for our 2D purposes we don't
actually care.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:42:36 +0000 (15:42 +0100)]
gma500: move opregion files
We've now sorted them out so they can go into the generic code. In actual
fact only the non MID devices use the functions but they are small and
having the name match i915 is going to help any future merging type work.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:42:11 +0000 (15:42 +0100)]
gma500: Rename the psb_intel_bios code
This is generic for the PC class devices and also very similar to the i915
intel_bios.c so rename it. That way the commonality will be obvious and we
can look at merging them one day, or at least synching them up.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:41:56 +0000 (15:41 +0100)]
gma500: begin the config based split
We don't want to carry all the extra gunk around on every device so use the
splitting work so far to tidy this up. Poulsbo is still mandatory as it is
used in bits by the other drivers and not neatly modularised.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:38:53 +0000 (15:38 +0100)]
gma500: Fix early Medfield crash
We need to initialise the DBI interface and the code for it got missed in
the original merge as it's in a daft place. This will need moving but lets
get it added first.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:38:26 +0000 (15:38 +0100)]
gma500: being abstracting out devices a bit more
We really want to move towards a completely abstracted interface rather
than having tons of per chip junk in the same files.
Begin with the power code which is probably the worst offender. Add a set
of methods, initialise a dev_priv->ops pointer and rip the chip specifics
out of the power code. While we are it pick up the display init bits.
So we know it's now chip specifics clean remove the psb_ naming from it.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:37:29 +0000 (15:37 +0100)]
gma500: Extract BIOSisy stuff from psb_drv
This is too big already so lets rip out more of the device specific crud. It
also means we pull the ugly stuff that needs work out of our main line of
cleanup.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:36:32 +0000 (15:36 +0100)]
gma500: 2D polish
Tidy up the 2D bits. For the fill case the CPU seems to be able to
outperform the graphics engine for the cases we get, so don't bother
fixing it but throw it out.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:35:55 +0000 (15:35 +0100)]
gma500: GEM glue
Add this temporarily so we can keep making progress and also bundle all the
GEM bits we need together in our staging driver while we get them into GEM
itself.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:35:06 +0000 (15:35 +0100)]
gma500: 2D acceleration tidying
We have a FIXME to do the power management for which the framework now
exists, and we also need to deal with an erratum. Some operations exactly 8
pixels wide or high fail. The work around is to do two smaller ones (see
the Intel released X driver bits) but for console quite frankly if it's
8bits wide and/or high its not worth it so fall back.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:34:28 +0000 (15:34 +0100)]
gma500: Do sane FB cleanup
If we get a user frame buffer destroyed which is being displayed then clean
up the mess nicely. We can now run a slightly modified modetest including setting
modes, and handling crashes.
Modetest still blows up but this is because libdrm 2.4.25 is busted.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Tue, 5 Jul 2011 14:34:03 +0000 (15:34 +0100)]
gma500: Ensure the frame buffer has a linear virtual mapping
We need this for the framebuffer in order to ensure that the kernel
framebuffer layer can handle it when using KMS. Except for the base
framebuffer this isn't a concern.
Add an npage field to the gtt as too many copies of the page calculation
are getting spread around the code.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Merge branch 'at91/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc
* 'at91/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc:
AT91: Change nand buswidth logic to match hardware default configuration
at91: Use "pclk" as con_id on at91cap9 and at91rm9200
at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl
atmel_serial: fix internal port num
at91: fix at91_set_serial_console: use platform device id
Commits 71c29bd5c235 ("IB/uverbs: Add devnode method to set path/mode")
and c3af0980ce01 ("IB: Add devnode methods to cm_class and umad_class")
added devnode methods that set the mode.
However, these methods don't check for a NULL mode, and so we get a
crash when unloading modules because devtmpfs_delete_node() calls
device_get_devnode() with mode == NULL.
Add the missing checks.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
[ Also fix cm.c. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Ferre [Fri, 1 Jul 2011 10:25:24 +0000 (12:25 +0200)]
AT91: Change nand buswidth logic to match hardware default configuration
The recently modified nand buswitth configuration is not aligned with
board reality: the double footprint on boards is always populated with 8bits
buswidth nand flashes.
So we have to consider that without particular configuration the 8bits
buswidth is selected by default.
Moreover, the previous logic was always using !board_have_nand_8bit(), we
change it to a simpler: board_have_nand_16bit().
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (k10temp) Update documentation for Fam12h
hwmon-vid: Fix typo in VIA CPU name
hwmon: (f71882fg) Add support for the F71869A
hwmon: Use <> rather than () around my e-mail address
hwmon: (emc6w201) Properly handle all errors
The F71869A is almost the same as the F71869F/E, except that it has
the normal number of temp and pwm zones for a F71882FG derived chip,
rather then the limited number of the F71869F/E.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Max Baldwin <archerseven@gmail.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jeff Skirvin [Fri, 1 Jul 2011 20:03:44 +0000 (13:03 -0700)]
isci: Device reset should request sas_phy_reset(phy, true)
The hard_reset parameter passed to the LLDD in the direct-attached
phy control case allows the LLDD to filter link failure events
while the direct-attached device reset is executing.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 1 Jul 2011 18:41:21 +0000 (11:41 -0700)]
isci: cleanup silicon revision detection
Perform checking per-pci device (even though all systems will only have
1 pci device in this generation), and delete support for silicon that
does not report a proper revision (i.e. A0).
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 1 Jul 2011 02:14:33 +0000 (19:14 -0700)]
isci: retire scic_sds_ and scic_ prefixes
The distinction between scic_sds_ scic_ and sci_ are no longer relevant
so just unify the prefixes on sci_. The distinction between isci_ and
sci_ is historically significant, and useful for comparing the old
'core' to the current Linux driver. 'sci_' represents the former core as
well as the routines that are closer to the hardware and protocol than
their 'isci_' brethren. sci == sas controller interface.
Also unwind the 'sds1' out of the parameter structs.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 1 Jul 2011 00:38:32 +0000 (17:38 -0700)]
isci: unify isci_host and scic_sds_controller
Remove the distinction between these two implementations and unify on
isci_host (local instances named ihost). Hmmm, we had two
'oem_parameters' instances, one was unused... nice.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Wed, 29 Jun 2011 20:09:25 +0000 (13:09 -0700)]
isci: unify isci_port and scic_sds_port
Remove the distinction between these two implementations and unify on
isci_port (local instances named iport). The duplicate '->owning_port' and
'->isci_port' in both isci_phy and isci_remote_device will be fixed in a later
patch... this is just the straightforward rename/unification.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 0815632 "isci: unify remote_device stop_handlers" introduced the
possibility that not all requests get terminated if we reach the
request_count. Now that we properly reference count devices we don't
need this self-defense and can do the straightforward scan of all active
requests.
Reported-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Acked-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Tue, 28 Jun 2011 22:05:53 +0000 (15:05 -0700)]
isci: unify isci_phy and scic_sds_phy
They are one in the same object so remove the distinction. The near
duplicate fields (owning_port, and isci_port) will be cleaned up
after the scic_sds_port isci_port unification.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Mon, 27 Jun 2011 21:57:03 +0000 (14:57 -0700)]
isci: unify isci_request and scic_sds_request
They are one in the same object so remove the distinction. The near
duplicate fields (owning_controller, and isci_host) will be cleaned up
after the scic_sds_contoller isci_host unification.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 17 Jun 2011 21:18:39 +0000 (14:18 -0700)]
isci: preallocate requests
the dma_pool interface is optimized for object_size << page_size which
is not the case with isci_request objects and the dma_pool routines show
up in the top of the profile.
The old io_request_table which tracked whether tci slots were in-flight
or not is replaced with an IREQ_ACTIVE flag per request.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Tue, 28 Jun 2011 20:47:09 +0000 (13:47 -0700)]
isci: unify can_queue tracking on the tci_pool, uplevel tag assignment
The tci_pool tracks our outstanding command slots which are also the 'index'
portion of our tags. Grabbing the tag early in ->lldd_execute_task let's us
drop the isci_host_can_queue() and ->was_tag_assigned_by_user infrastructure.
->was_tag_assigned_by_user required the task context to be duplicated in
request-local buffer. With the tci established early we can build the
task_context directly into its final location and skip a memcpy.
With the task context buffer at a known address at request construction we
have the opportunity/obligation to also fix sgl handling. This rework feels
like it belongs in another patch but the sgl handling and task_context are too
intertwined.
1/ fix the 'ab' pair embedded in the task context to point to the 'cd' pair in
the task context (previously we were prematurely linking to the staging
buffer).
2/ fix the broken iteration of pio sgls that assumes all sgls are relative to
the request, and does a dangerous looking reverse lookup of physical
address to virtual address.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Fri, 24 Jun 2011 00:09:02 +0000 (17:09 -0700)]
isci: Terminate dev requests on FIS err bit rx in NCQ
When the remote device transitions to a not-ready state because of
an NCQ error condition, all outstanding requests to that device
are terminated and completed to libsas on the normal path. The
device then waits for a READ LOG EXT command to issue on the task
management path.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Maciej Patelczyk [Tue, 21 Jun 2011 22:03:13 +0000 (22:03 +0000)]
isci: possible buffer overflow in isci_parse_oem_parameters fixed
scu_index is a parameter of isci_parse_eom_parameters and is an index
in controller table. There is a check: scu_index > SCI_MAX_CONTROLLERS
which is insufficient and should be: scu_index >= SCI_MAX_CONTROLLERS.
scu_index is used as an index in the table which size is
SCI_MAX_CONTROLLERS.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Tue, 21 Jun 2011 23:23:03 +0000 (16:23 -0700)]
isci: fix isci_task_execute_tmf completion
1/ fix the timeout for wait_for_completion_timeout
2/ In the tmf timeout case we need to wait for our termination callback
3/ Once the request is successfully started it will be freed according to the
normal lifetime for requests.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 16 Jun 2011 23:59:56 +0000 (16:59 -0700)]
isci: fix support for arbitrarily large smp requests
Instead of duplicating the smp request buffer reuse the one provided by
libsas. This future proofs the driver to support arbitrarily large smp
requests, and shrinks the request structure size by ~700 bytes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 17 Jun 2011 00:20:35 +0000 (17:20 -0700)]
isci: fix smp response frame overrun
Due to a typo we currently copy way too much when copying over the
response data, but since a request is likely backed by a full page
allocation we don't corrupt live data.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 16 Jun 2011 18:26:12 +0000 (11:26 -0700)]
isci: kill isci_remote_device_change_state()
Now that "stopping/stopped" are one in the same and signalled by a NULL device
pointer the rest of the device status infrastructure can be removed (->status
and ->state_lock). The "not ready for i/o state" is replaced with a state
flag, and is evaluated under scic_lock so that we don't see transients from
taking the device reference to submitting the i/o.
This also fixes a potential leakage of can_queue slots in the rare case that
SAS_TASK_ABORTED is set at submission.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Tue, 14 Jun 2011 00:39:44 +0000 (17:39 -0700)]
isci: atomic device lookup and reference counting
We have unsafe references to remote devices that are notified to
disappear at lldd_dev_gone. In order to clean this up we need a single
canonical source for device lookups and stable references once a lookup
succeeds. Towards that end guarantee that domain_device.lldd_dev is
NULL as soon as we start the process of stopping a device. Any code
path that wants to safely lookup a remote device must do so through
task->dev->lldd_dev (isci_lookup_device()).
For in-flight references outside of scic_lock we need reference counting
to ensure that the device is not recycled before we are done with it.
Simplify device back references to just scic_sds_request.target_device
which is now the only permissible internal reference that is maintained
relative to the reference count.
There were two occasions where we wanted new i/o's to be treated as
SAS_TASK_UNDELIVERED but where the domain_dev->lldd_dev link is still
intact. Introduce a 'gone' flag to prevent i/o while waiting for libsas
to take action on the port down event.
One 'core' leftover is that we currently call
scic_remote_device_destruct() from isci_remote_device_deconstruct()
which is called when the 'core' says the device is stopped. It would be
more natural for the final put to trigger
isci_remote_device_deconstruct() but this implementation is deferred as
it requires other changes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Wed, 15 Jun 2011 18:11:03 +0000 (11:11 -0700)]
isci: fix ssp response iu buffer size in isci_tmf
In isci_task_request_complete() we save the response/sense data from the
command. Make sure isci_tmf has enough space to hold the full response.
[ it does not look like we actually use this data, and
response_data_len/sense_data_len should be specifying the byte count,
in any event do the simple fix first so we don't corrupt memory ]
Reported-by: Adam Gruchala <adam.gruchala@intel.com> Tested-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Mon, 13 Jun 2011 07:51:30 +0000 (00:51 -0700)]
isci: cleanup request allocation
Rather than return an error code and update a pointer that was passed by
reference just return the request object directly (or null if allocation
failed).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 9 Jun 2011 23:04:28 +0000 (16:04 -0700)]
isci: cleanup/optimize queue increment macros
Every single i/o or event completion incurs a test and branch to see if
the cycle bit changed. For power-of-2 queue sizes the cycle bit can be
read directly from the rollover of the queue pointer.
Likely premature optimization, but the hidden if() and hidden
assignments / side-effects in the macros were already asking to be
cleaned up.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
projects / linux-beck.git / log