Chris Wilson [Wed, 22 Mar 2017 20:59:30 +0000 (20:59 +0000)]
drm/i915: Restore marking context objects as dirty on pinning
Commit e8a9c58fcd9a ("drm/i915: Unify active context tracking between
legacy/execlists/guc") converted the legacy intel_ringbuffer submission
to the same context pinning mechanism as execlists - that is to pin the
context until the subsequent request is retired. Previously it used the
vma retirement of the context object to keep itself pinned until the
next request (after i915_vma_move_to_active()). In the conversion, I
missed that the vma retirement was also responsible for marking the
object as dirty. Mark the context object as dirty when pinning
(equivalent to execlists) which ensures that if the context is swapped
out due to mempressure or suspend/hibernation, when it is loaded back in
it does so with the previous state (and not all zero).
Fixes: e8a9c58fcd9a ("drm/i915: Unify active context tracking between legacy/execlists/guc") Reported-by: Dennis Gilmore <dennis@ausil.us> Reported-by: Mathieu Marquer <mathieu.marquer@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1 Link: http://patchwork.freedesktop.org/patch/msgid/20170322205930.12762-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Wed, 22 Mar 2017 22:34:47 +0000 (22:34 +0000)]
drm/i915: Actually pass the reclaim gfp_t along to shmemfs!
Words cannot describe the embarrassment at creating a new gfp_t relaim to
only prevent the oomkiller but allow direct|kswapd reclaim, and then not
use it in the shmem_read_mapping_page_gfp().
Fixes: 24f8e00a8a2e ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322223447.7493-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dave Airlie [Wed, 22 Mar 2017 22:53:41 +0000 (08:53 +1000)]
Merge tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc into drm-next
drm-misc for 4.12, 2nd attempt this week:
- topic branch from Jon Corbet for the new graph kerneldoc support
- lots of graphs for kms/atomic things using the above
- some vblank query tuning from Chris
- gem/cma_fops macros
- moar docs
Driver stuff:
- vc4 hdmi audio, yay (Eric)
- dw-hdmi polish from a bunch of people
- some rockchip dp updates that didn't make last week (Chris Zhong)
- misc bridge&driver updates
* tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits)
drm/edid: detect SCDC support in HF-VSDB
drm/edid: detect SCDC support in HF-VSDB
drm/edid: check for HF-VSDB block
drm: Add SCDC helpers
drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config
drm/bridge: dw_hdmi: support i2c extended read mode
drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
drm: bochs: Don't remove uninitialized fbdev framebuffer
drm: vc4: remove redundant check of plane being non-null
drm/vc4: use platform_register_drivers
dma-fence: add dma_fence_match_context helper
drm/vc4: Add HDMI audio support
dt-bindings: Document the dmas and dma-names properties for VC4 HDMI
drm/atmel-hlcdc: Fix suspend/resume implementation
drm: Skip the waitqueue setup for vblank queries
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
drm/doc: atomic overview, with graph
drm/doc: diagram for mode objects and properties
drm/doc: Consistent kerneldoc include order
drm/doc: Add KMS overview graphs
...
Dave Airlie [Wed, 22 Mar 2017 22:47:23 +0000 (08:47 +1000)]
Merge tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel into drm-next
More in i915 for 4.12:
- designware i2c fixes from Hans de Goede, in a topic branch shared
with other subsystems (maybe, they didn't confirm, but requested the
pull)
- drop drm_panel usage from the intel dsi vbt panel (Jani)
- vblank evasion improvements and tracing (Maarten and Ville)
- clarify spinlock irq semantics again a bit (Tvrtko)
- new ->pwrite backend hook (right now just for shmem pageche writes),
from Chris
- more planar/ccs work from Ville
- hotplug safe connector iterators everywhere
- userptr fixes (Chris)
- selftests for cache coloring eviction (Matthew Auld)
- extend debugfs drop_caches interface for shrinker testing (Chris)
- baytrail "the rps kills the machine" fix (Chris)
- use new atomic state iterators, a lot (Maarten)
- refactor guc/huc code some (Arkadiusz Hiler)
- tighten breadcrumbs rbtree a bit (Chris)
- improve wrap-around and time handling in rps residency counters
(Mika)
- split reset-in-progress in two flags, backoff and handoff (Chris)
- other misc reset improvements from a few people
- bunch of vgpu interaction fixes with recent code changes
- misc stuff all over, as usual
* tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel: (144 commits)
drm/i915: Update DRIVER_DATE to 20170320
drm/i915: Initialise i915_gem_object_create_from_data() directly
drm/i915: Correct error handling for i915_gem_object_create_from_data()
drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex
drm/i915: Retire an active batch pool object rather than allocate new
drm/i915: Add i810/i815 pci-ids for completeness
drm/i915: Skip execlists_dequeue() early if the list is empty
drm/i915: Stop using obj->obj_exec_link outside of execbuf
drm/i915: Squelch WARN for VLV_COUNTER_CONTROL
drm/i915/glk: Enable pooled EUs for Geminilake
drm/i915: Remove superfluous i915_add_request_no_flush() helper
drm/i915/vgpu: Neuter forcewakes for VGPU more thoroughly
drm/i915: Fix vGPU balloon for ggtt guard page
drm/i915: Avoid use-after-free of ctx in request tracepoints
drm/i915: Assert that the context pin_counts do not overflow
drm/i915: Wait for reset to complete before returning from debugfs/i915_wedged
drm/i915: Restore engine->submit_request before unwedging
drm/i915: Move engine->submit_request selection to a vfunc
drm/i915: Split I915_RESET_IN_PROGRESS into two flags
drm/i915: make context status notifier head be per engine
...
Ville Syrjälä [Tue, 14 Mar 2017 15:10:50 +0000 (17:10 +0200)]
drm/i915: Fix SKL cursor watermarks
Use intel_wm_plane_visible() to determine cursor visibility for SKL+
also. Previously SKL+ would check the actual visibility which now
conflicts with the assumptions in intel_legacy_cursor_update().
We also change SKL+ to compute the cursor watermarks based on the
unclipped cursor size, just as we do on all the other platforms.
Using the clipped size could now result in garbage results.
Testcase: igt/kms_chv_cursor_fail Fixes: a5509abda48e ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100195 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-2-ville.syrjala@linux.intel.com Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk> Tested-by: Jari Tahvanainen <jari.tahvanainen@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Ville Syrjälä [Tue, 14 Mar 2017 15:10:49 +0000 (17:10 +0200)]
drm/i915: Extract intel_wm_plane_visible()
All platforms that lack double buffered watermarks will need to
handle the legacy cursor updates in the same way. So let's extract the
logic to determine the plane visibility into a small helper. For
simplicity we'll make the function DTRT for any plane, but only apply
the special sauce for cursor planes.
Chris Wilson [Wed, 22 Mar 2017 11:05:21 +0000 (11:05 +0000)]
drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations
Since gfx allocations tend to be large, unmovable and disposable, report
the allocation failure back to userspace as an ENOMEM rather than incur
the oomkiller. We have already tried to make room by purging our own
cached gfx objects, and the oomkiller doesn't attribute ownership of gfx
objects so will likely pick the wrong candidate. Instead, let userspace
see the ENOMEM.
Paulo Zanoni [Wed, 22 Mar 2017 18:58:44 +0000 (15:58 -0300)]
drm/i915: simplify intel_ddi_pll_select()
Because {hsw,skl,bxt}_ddi_pll_select all pretty much do the same thing
in slightly different ways. Replace everything with a simple copy of
the function and inline it inside intle_ddi_pll_select().
drm/i915: Implement cdclk restrictions based on Azalia BCLK
According to BSpec, "The CD clock frequency must be at least twice the
frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by
default. This check is needed because BXT and GLK support cdclk
frequencies less than 192 MHz.
v2: Include other Gen9 platforms too for completeness.(Paulo)
Implement the DP-Audio cdclk restriction for GLK, similar to what is
implemented for BDW and other GEN9 platforms. The max. pixel clock
adjustment for GLK, however factors in the 2 pixels per clock output that
GLK generates.
Separating min. cdclk and max. pixel_rate would be nicer, but let's
defer that to future and fix the GLK bug for now.
Chris Wilson [Tue, 21 Mar 2017 10:25:52 +0000 (10:25 +0000)]
drm/i915: Remove intel_ring.last_retired_head
Storing the position of the breadcrumb of the last retired request as
a separate last_retired_head is superfluous as we always copy that into
head prior to recalculation of the intel_ring.space.
Chris Wilson [Tue, 21 Mar 2017 11:33:20 +0000 (11:33 +0000)]
drm/i915/execlists: Split the atomic test_and_clear_bit for irq handler
Rather than impose the cost of a locked test before queuing a new
request, reduce it to a simple test_bit() with a following clear_bit()
prior to doing the CSB check. This ensure that if an interrupt does
occur whilst reading from the CSB, we still detect it (the interrupt
would trigger a rescheduling of the tasklet anyway).
Arnd Bergmann [Mon, 20 Mar 2017 09:40:28 +0000 (10:40 +0100)]
drm/i915: split out check for noncontiguous pfn range
We get a warning with gcc-7 about a pointless comparison when
using a linear memmap:
drivers/gpu/drm/i915/selftests/scatterlist.c: In function 'alloc_table':
drivers/gpu/drm/i915/selftests/scatterlist.c:219:66: error: self-comparison always evaluates to false [-Werror=tautological-compare]
Splitting out the comparison into a separate function avoids the warning
and makes it slightly more obvious what happens.
As intel_engine_init_global_seqno() may be called by
nop_submit_request() from inside irq context, we have to use atomic
versions of kmap/kunmap. This is rare as this requires using gen8 legacy
ringbuffer submission.
Chris Wilson [Mon, 20 Mar 2017 14:31:33 +0000 (14:31 +0000)]
drm/i915: Protect intel_engine_wakeup() for call from irq context
intel_engine_wakeup() is called by nop_request_submit() which is
installed to handle third party fences completed from within irq
context. As such, it needs the full irqsave/irqrestore and not the
partial spin_irq_lock handling.
Fixes: cdc3a4539034 ("drm/i915: No need to save/restore irq status in intel_engine_wakeup") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170320143133.1507-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tvrtko Ursulin [Mon, 20 Mar 2017 13:25:56 +0000 (13:25 +0000)]
drm/i915/guc: Correct the request_in tracepoint position
It has to be called after the global seqno has been assigned.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 31de73501ac9 ("drm/i915/scheduler: emulate a scheduler for guc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170320132556.29286-1-tvrtko.ursulin@linux.intel.com
Shashank Sharma [Mon, 13 Mar 2017 11:24:02 +0000 (16:54 +0530)]
drm/edid: detect SCDC support in HF-VSDB
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
- Add clock rate calculations for 1/10 and 1/40 ratios
- Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Shashank Sharma [Mon, 13 Mar 2017 11:24:01 +0000 (16:54 +0530)]
drm/edid: detect SCDC support in HF-VSDB
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
Thierry Reding [Mon, 13 Mar 2017 11:23:59 +0000 (16:53 +0530)]
drm: Add SCDC helpers
SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Addressed review comments from Ville
- Handle the I2c return values in a better way (dp_dual_mode)
- Make the macros for SCDC Major/Minor more readable, by adding
a 'GET' in the macro names
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Nickey Yang [Mon, 20 Mar 2017 02:57:31 +0000 (10:57 +0800)]
drm/bridge: dw_hdmi: support i2c extended read mode
"I2C Master Interface Extended Read Mode" implements a segment
pointer-based read operation using the Special Register configuration.
This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned
"The current implementation does not support "I2C Master Interface
Extended Read Mode" to read data addressed by non-zero segment
pointer, this means that if EDID has more than 1 extension blocks,
EDID reading operation won't succeed"
With this patch, dw-hdmi can read EDID data with 1/2/4 blocks.
Arnd Bergmann [Mon, 20 Mar 2017 09:39:25 +0000 (10:39 +0100)]
drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
We now call those two functions even when they are not defined
or declared anywhere because DEBUG_FS is disabled:
drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit':
drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
This adds empty stub implementations for that case.
Chris Wilson [Sat, 18 Mar 2017 10:42:57 +0000 (10:42 +0000)]
drm/i915: Skip force-wake for uncached mmio flush of GGTT writes
The trick of using an uncached mmio read to ensure that the GGTT writes
are flushed does not require us to do the forcewake dance, so avoid it
in the hope of reducing the frequency that we do keep the device forced
awake.
Chris Wilson [Sat, 18 Mar 2017 10:28:59 +0000 (10:28 +0000)]
drm/i915: Reset tasklet back to execlists after disabling guc
When switching back to execlists, we also now need to restore the
tasklet handler.
Reported-by: Oscar Mateo <oscar.mateo@intel.com> Fixes: 31de73501ac9 ("drm/i915/scheduler: emulate a scheduler for guc") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170318102859.24101-1-chris@chris-wilson.co.uk Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
In the same spirit of the fix for QXL in commit 861078381ba5 ("drm: qxl:
Don't alloc fbdev if emulation is not supported"), prevent the Oops in
the unbind path of Bochs if fbdev emulation is disabled.
Dave Airlie [Mon, 20 Mar 2017 06:49:20 +0000 (16:49 +1000)]
Merge tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm PRE/PRG support, deferred plane disabling, separate alpha support
- Initial support for the Prefetch Resolve Engine/Gasket on i.MX6QP,
improving linear scanout buffer memory bandwidth utilization. This
will in the future grow reordering support and allow direct scanout
of Vivante tiled renderbuffers from the GPU.
- Deferred plane disabling gets rid of some busy waiting in the atomic
plane disable and crtc disable paths that lead to wait_for_vblank
timeouts.
- Add support for RGBA formats with a separate alpha plane, that can
reduce memory bandwidth utilization for mostly transparent overlay
planes by skipping color reads for completely transparent regions.
- Allow moving an active overlay plane without enforcing a modeset.
- Add 8-bit and 16-bit bayer formats to ipu_cpmem_set_image.
- Set the base address in ipu_cpmem_set_image even for invalid formats
to increase robustness against errors.
- Use drm_plane_helper_check_state in plane atomic_check.
- Some cleanup.
* tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux: (22 commits)
drm/imx: Remove unneeded definition for structure imx_drm_component
drm/imx: use PRG/PRE when possible
drm/imx: enable/disable PRG on CRTC enable/disable
gpu: ipu-v3: only set non-zero AXI ID for IC when PRG is absent
gpu: ipu-v3: hook up PRG unit
gpu: ipu-v3: document valid IPUv3 compatibles and extend for i.MX6 QuadPlus
gpu: ipu-v3: add driver for Prefetch Resolve Gasket
gpu: ipu-v3: add DT binding for the Prefetch Resolve Gasket
gpu: ipu-v3: add driver for Prefetch Resolve Engine
gpu: ipu-v3: add DT binding for the Prefetch Resolve Engine
drm/imx: ipuv3-plane: add support for separate alpha planes
drm/imx: extend drm_plane_state_to_eba for separate channel support
gpu: ipu-v3: add support for separate alpha channels
drm: add RGB formats with separate alpha plane
drm/imx: add deferred plane disabling
drm/imx: don't wait for vblank and stop calling cleanup_planes in commit_tail
gpu: ipu-v3: add unsynchronised DP channel disabling
gpu: ipu-v3: remove IRQ dance on DC channel disable
gpu: ipu-cpmem: add bayer formats to ipu_cpmem_set_image
gpu: ipu-cpmem: set image base address even for incorrect formats
...
Linus Torvalds [Mon, 20 Mar 2017 02:00:47 +0000 (19:00 -0700)]
mm/swap: don't BUG_ON() due to uninitialized swap slot cache
This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check. The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.
I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there. I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.
Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 20 Mar 2017 01:49:28 +0000 (18:49 -0700)]
Merge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
"A couple of minor powerpc fixes for 4.11:
- wire up statx() syscall
- don't print a warning on memory hotplug when HPT resizing isn't
available
Thanks to: David Gibson, Chandan Rajendra"
* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Don't give a warning when HPT resizing isn't available
powerpc: Wire up statx() syscall
Linus Torvalds [Mon, 20 Mar 2017 01:11:13 +0000 (18:11 -0700)]
Merge branch 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
modules with CONFIG_MODVERSIONS.
- Dave Anglin optimized the cache flushing for vmap ranges.
- Arvind Yadav provided a fix for a potential NULL pointer dereference
in the parisc perf code (and some code cleanups).
- I wired up the new statx system call, fixed some compiler warnings
with the access_ok() macro and fixed shutdown code to really halt a
system at shutdown instead of crashing & rebooting.
* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix system shutdown halt
parisc: perf: Fix potential NULL pointer dereference
parisc: Avoid compiler warnings with access_ok()
parisc: Wire up statx system call
parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
parisc: support R_PARISC_SECREL32 relocation in modules
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the changes are in qla2xxx target driver code to address
various issues found during Cavium/QLogic's internal testing (stable
CC's included), along with a few other stability and smaller
miscellaneous improvements.
There are also a couple of different patch sets from Mike Christie,
which have been a result of his work to use target-core ALUA logic
together with tcm-user backend driver.
Finally, a patch to address some long standing issues with
pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
which will make folks using physical (or virtual) magnetic tape happy"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
qla2xxx: Update driver version to 9.00.00.00-k
qla2xxx: Fix delayed response to command for loop mode/direct connect.
qla2xxx: Change scsi host lookup method.
qla2xxx: Add DebugFS node to display Port Database
qla2xxx: Use IOCB interface to submit non-critical MBX.
qla2xxx: Add async new target notification
qla2xxx: Export DIF stats via debugfs
qla2xxx: Improve T10-DIF/PI handling in driver.
qla2xxx: Allow relogin to proceed if remote login did not finish
qla2xxx: Fix sess_lock & hardware_lock lock order problem.
qla2xxx: Fix inadequate lock protection for ABTS.
qla2xxx: Fix request queue corruption.
qla2xxx: Fix memory leak for abts processing
qla2xxx: Allow vref count to timeout on vport delete.
tcmu: Convert cmd_time_out into backend device attribute
tcmu: make cmd timeout configurable
tcmu: add helper to check if dev was configured
target: fix race during implicit transition work flushes
target: allow userspace to set state to transitioning
target: fix ALUA transition timeout handling
...
Linus Torvalds [Sun, 19 Mar 2017 22:45:02 +0000 (15:45 -0700)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull device-dax fixes from Dan Williams:
"The device-dax driver was not being careful to handle falling back to
smaller fault-granularity sizes.
The driver already fails fault attempts that are smaller than the
device's alignment, but it also needs to handle the cases where a
larger page mapping could be established. For simplicity of the
immediate fix the implementation just signals VM_FAULT_FALLBACK until
fault-size == device-alignment.
One fix is for -stable to address pmd-to-pte fallback from the
original implementation, another fix is for the new (introduced in
4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
ride.
These have received a build success notification from the kbuild
robot"
Quinn Tran [Wed, 15 Mar 2017 16:48:55 +0000 (09:48 -0700)]
qla2xxx: Fix delayed response to command for loop mode/direct connect.
Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.
Quinn Tran [Wed, 15 Mar 2017 16:48:54 +0000 (09:48 -0700)]
qla2xxx: Change scsi host lookup method.
For target mode, when new scsi command arrive, driver first performs
a look up of the SCSI Host. The current look up method is based on
the ALPA portion of the NPort ID. For Cisco switch, the ALPA can
not be used as the index. Instead, the new search method is based
on the full value of the Nport_ID via btree lib.
Quinn Tran [Wed, 15 Mar 2017 16:48:52 +0000 (09:48 -0700)]
qla2xxx: Use IOCB interface to submit non-critical MBX.
The Mailbox interface is currently over subscribed. We like
to reserve the Mailbox interface for the chip managment and
link initialization. Any non essential Mailbox command will
be routed through the IOCB interface. The IOCB interface is
able to absorb more commands.
Following commands are being routed through IOCB interface
- Get ID List (007Ch)
- Get Port DB (0064h)
- Get Link Priv Stats (006Dh)
Quinn Tran [Wed, 15 Mar 2017 16:48:48 +0000 (09:48 -0700)]
qla2xxx: Allow relogin to proceed if remote login did not finish
If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.
Quinn Tran [Wed, 15 Mar 2017 16:48:47 +0000 (09:48 -0700)]
qla2xxx: Fix sess_lock & hardware_lock lock order problem.
The main lock that needs to be held for CMD or TMR submission
to upper layer is the sess_lock. The sess_lock is used to
serialize cmd submission and session deletion. The addition
of hardware_lock being held is not necessary. This patch removes
hardware_lock dependency from CMD/TMR submission.
Use hardware_lock only for error response in this case.
Quinn Tran [Wed, 15 Mar 2017 16:48:46 +0000 (09:48 -0700)]
qla2xxx: Fix inadequate lock protection for ABTS.
Normally, ABTS is sent to Target Core as Task MGMT command.
In the case of error, qla2xxx needs to send response, hardware_lock
is required to prevent request queue corruption.
Quinn Tran [Wed, 15 Mar 2017 16:48:45 +0000 (09:48 -0700)]
qla2xxx: Fix request queue corruption.
When FW notify driver or driver detects low FW resource,
driver tries to send out Busy SCSI Status to tell Initiator
side to back off. During the send process, the lock was not held.
tcmu: Convert cmd_time_out into backend device attribute
Instead of putting cmd_time_out under ../target/core/user_0/foo/control,
which has historically been used by parameters needed for initial
backend device configuration, go ahead and move cmd_time_out into
a backend device attribute.
In order to do this, tcmu_module_init() has been updated to create
a local struct configfs_attribute **tcmu_attrs, that is based upon
the existing passthrough_attrib_attrs along with the new cmd_time_out
attribute. Once **tcm_attrs has been setup, go ahead and point
it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core.
Also following MNC's previous change, ->cmd_time_out is stored in
milliseconds but exposed via configfs in seconds. Also, note this
patch restricts the modification of ->cmd_time_out to before +
after the TCMU device has been configured, but not while it has
active fabric exports.
Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 9 Mar 2017 08:42:09 +0000 (02:42 -0600)]
tcmu: make cmd timeout configurable
A single daemon could implement multiple types of devices
using multuple types of real devices that may not support
restarting from crashes and/or handling tcmu timeouts. This
makes the cmd timeout configurable, so handlers that do not
support it can turn if off for now.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 9 Mar 2017 08:42:08 +0000 (02:42 -0600)]
tcmu: add helper to check if dev was configured
This adds a helper to check if the dev was configured. It
will be used in the next patch to prevent updates to some
config settings after the device has been setup.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Sat, 18 Mar 2017 22:50:39 +0000 (15:50 -0700)]
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull OpenRISC fixes from Stafford Horne:
"OpenRISC fixes for build issues that were exposed by kbuild robots
after 4.11 merge. All from allmodconfig builds. This includes:
- bug in the handling of 8-byte get_user() calls
- module build failure due to multile missing symbol exports"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
openrisc: Export symbols needed by modules
openrisc: fix issue handling 8 byte get_user calls
openrisc: xchg: fix `computed is not used` warning
Mike Christie [Thu, 2 Mar 2017 10:59:50 +0000 (04:59 -0600)]
target: fix race during implicit transition work flushes
This fixes the following races:
1. core_alua_do_transition_tg_pt could have read
tg_pt_gp_alua_access_state and gone into this if chunk:
if (!explicit &&
atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
ALUA_ACCESS_STATE_TRANSITION) {
and then core_alua_do_transition_tg_pt_work could update the
state. core_alua_do_transition_tg_pt would then only set
tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
not get updated with the second calls state.
2. core_alua_do_transition_tg_pt could be setting
tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
is already completing. core_alua_do_transition_tg_pt then waits on the
completion that will never be called.
To handle these issues, we just call flush_work which will return when
core_alua_do_transition_tg_pt_work has completed so there is no need
to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
was running, instead of trying to sneak in the state change, we just
schedule up another core_alua_do_transition_tg_pt_work call.
Note that this does not handle a possible race where there are multiple
threads call core_alua_do_transition_tg_pt at the same time. I think
we need a mutex in target_tg_pt_gp_alua_access_state_store.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 10:59:49 +0000 (04:59 -0600)]
target: allow userspace to set state to transitioning
Userspace target_core_user handlers like tcmu-runner may want to set the
ALUA state to transitioning while it does implicit transitions. This
patch allows that state when set from configfs.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 10:59:48 +0000 (04:59 -0600)]
target: fix ALUA transition timeout handling
The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:13:26 +0000 (23:13 -0600)]
target: Use system workqueue for ALUA transitions
If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.
Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.
For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:13:25 +0000 (23:13 -0600)]
target: fail ALUA transitions for pscsi
We do not setup the LU group for pscsi devices, so if you write
a state to alua_access_state that will cause a transition you will
get a NULL pointer dereference.
This patch will fail attempts to try and transition the path
for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA
flag.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:13:24 +0000 (23:13 -0600)]
target: allow ALUA setup for some passthrough backends
This patch allows passthrough backends to use the core/base LIO
ALUA setup and state checks, but still handle the execution of
commands.
This will allow the target_core_user module to execute STPG and RTPG
in userspace, and not have to duplicate the ALUA state checks, path
information (needed so we can check if command is executable on
specific paths) and setup (rtslib sets/updates the configfs ALUA
interface like it does for iblock or file).
For STPG, the target_core_user userspace daemon, tcmu-runner will
still execute the STPG, and to update the core/base LIO state it
will use the existing configfs interface. For RTPG, tcmu-runner
will loop over configfs and/or cache the state.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mike Christie [Thu, 2 Mar 2017 05:14:39 +0000 (23:14 -0600)]
tcmu: allow hw_max_sectors greater than 128
tcmu hard codes the hw_max_sectors to 128 which is a litle small.
Userspace uses the max_sectors to report the optimal IO size and
some initiators perform better with larger IOs (open-iscsi seems
to do better with 256 to 512 depending on the test).
(Fix do not display hw max sectors twice - MNC)
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
All in-tree fabric drivers provide a tfo->check_stop_free(),
so there is no need to do the extra check within existing
transport_cmd_check_stop_to_fabric() code.
Just to be sure, add a check in target_fabric_tf_ops_check()
to notify any out-of-tree drivers that might be missing it.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Helge Deller [Sat, 18 Mar 2017 16:13:27 +0000 (17:13 +0100)]
parisc: Fix system shutdown halt
On those parisc machines which don't provide a software power off
function, the system currently kills the init process at the end of a
shutdown and unexpectedly restarts insteads of halting.
Fix it by adding a loop which will not return.
Linus Torvalds [Sat, 18 Mar 2017 15:33:44 +0000 (08:33 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Thomas Gleixner:
"A single fix preventing the concurrent execution of the CPU hotplug
callback install/invocation machinery. Long standing bug caused by a
massive brain slip of that Gleixner dude, which went unnoticed for
almost a year"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Serialize callback invocations proper
Linus Torvalds [Sat, 18 Mar 2017 00:25:14 +0000 (17:25 -0700)]
Merge tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few more intel_pstate issues and one small issue in the
cpufreq core.
Specifics:
- Fix breakage in the intel_pstate's debugfs interface for PID
controller tuning (Rafael Wysocki)
- Fix computations related to P-state limits in intel_pstate to avoid
excessive rounding errors leading to visible inaccuracies (Srinivas
Pandruvada, Rafael Wysocki)
- Add a missing newline to a message printed by one function in the
cpufreq core and clean up that function (Rafael Wysocki)"
* tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
cpufreq: intel_pstate: Avoid percentages in limits-related computations
cpufreq: intel_pstate: Correct frequency setting in the HWP mode
cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
Merge branches 'pm-cpufreq-fixes' and 'intel_pstate-fixes'
* pm-cpufreq-fixes:
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
* intel_pstate-fixes:
cpufreq: intel_pstate: Avoid percentages in limits-related computations
cpufreq: intel_pstate: Correct frequency setting in the HWP mode
cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
Colin Ian King [Thu, 16 Mar 2017 18:54:18 +0000 (18:54 +0000)]
drm: vc4: remove redundant check of plane being non-null
The pointer plane is always null on the error path at label 'fail'
hence the check if it is non-null is redundant. We can therefore
remove the check and the destruction of plane as well as the fail
error path and instead just return an -ENOMEM ERR_PTR.
Detected by CoverityScan, CID#1339532 ("Logically Dead Code")
Linus Torvalds [Fri, 17 Mar 2017 21:16:22 +0000 (14:16 -0700)]
Merge tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"We have a handful of stable fixes to fix kernel warnings and other
bugs that have been around for a while. We've also found a few other
reference counting bugs and memory leaks since the initial 4.11 pull.
Stable Bugfixes:
- Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings
- Prevent a double free in async nfs4_exchange_id()
- Squelch a kbuild sparse complaint for xprtrdma
Other Bugfixes:
- Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak
- Fix a reference leak that causes kernel warnings
- Make nfs4_cb_sv_ops static to fix a sparse warning
- Respect a server's max size in CREATE_SESSION
- Handle errors from nfs4_pnfs_ds_connect
- Flexfiles layout shouldn't mark devices as unavailable"
* tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
pNFS/flexfiles: never nfs4_mark_deviceid_unavailable
pNFS: return status from nfs4_pnfs_ds_connect
NFSv4.1 respect server's max size in CREATE_SESSION
NFS prevent double free in async nfs4_exchange_id
nfs: make nfs4_cb_sv_ops static
xprtrdma: Squelch kbuild sparse complaint
NFS: fix the fault nrequests decreasing for nfs_inode COPY
NFSv4: fix a reference leak caused WARNING messages
nfs4: fix a typo of NFS_ATTR_FATTR_GROUP_NAME
Linus Torvalds [Fri, 17 Mar 2017 21:05:03 +0000 (14:05 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"An assorted pile of fixes along with some hardware enablement:
- a fix for a KASAN / branch profiling related boot failure
- some more fallout of the PUD rework
- a fix for the Always Running Timer which is not initialized when
the TSC frequency is known at boot time (via MSR/CPUID)
- a resource leak fix for the RDT filesystem
- another unwinder corner case fixup
- removal of the warning for duplicate NMI handlers because there are
legitimate cases where more than one handler can be registered at
the last level
- make a function static - found by sparse
- a set of updates for the Intel MID platform which got delayed due
to merge ordering constraints. It's hardware enablement for a non
mainstream platform, so there is no risk"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mpx: Make unnecessarily global function static
x86/intel_rdt: Put group node in rdtgroup_kn_unlock
x86/unwind: Fix last frame check for aligned function stacks
mm, x86: Fix native_pud_clear build error
x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
x86/platform/intel-mid: Add power button support for Merrifield
x86/platform/intel-mid: Use common power off sequence
x86/platform: Remove warning message for duplicate NMI handlers
x86/tsc: Fix ART for TSC_KNOWN_FREQ
x86/platform/intel-mid: Correct MSI IRQ line for watchdog device
Linus Torvalds [Fri, 17 Mar 2017 21:01:40 +0000 (14:01 -0700)]
Merge branch 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 acpi fixes from Thomas Gleixner:
"This update deals with the fallout of the recent work to make
cpuid/node mappings persistent.
It turned out that the boot time ACPI based mapping tripped over ACPI
inconsistencies and caused regressions. It's partially reverted and
the fragile part replaced by an implementation which makes the mapping
persistent when a CPU goes online for the first time"
* 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
acpi/processor: Check for duplicate processor ids at hotplug time
acpi/processor: Implement DEVICE operator for processor enumeration
x86/acpi: Restore the order of CPU IDs
Revert"x86/acpi: Enable MADT APIs to return disabled apicids"
Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"
Linus Torvalds [Fri, 17 Mar 2017 20:19:07 +0000 (13:19 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"From the scheduler departement:
- a bunch of sched deadline related fixes which deal with various
buglets and corner cases.
- two fixes for the loadavg spikes which are caused by the delayed
NOHZ accounting"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Use deadline instead of period when calculating overflow
sched/deadline: Throttle a constrained deadline task activated after the deadline
sched/deadline: Make sure the replenishment timer fires in the next period
sched/loadavg: Use {READ,WRITE}_ONCE() for sample window
sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
sched/deadline: Add missing update_rq_clock() in dl_task_timer()
Linus Torvalds [Fri, 17 Mar 2017 20:13:35 +0000 (13:13 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Just a simple revert of a new sched_clock implementation which turned
out to be buggy"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock"
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it
can wait on another context to reach the same failure.
This checks that the rpc_create succeeded and returns the error to the
caller.
When an error is returned, both the files and flexfiles layouts will return
NULL from _prepare_ds(). The flexfiles layout will also return the layout
with the error NFS4ERR_NXIO.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFSv4.1 respect server's max size in CREATE_SESSION
Currently client doesn't respect max sizes server returns in CREATE_SESSION.
nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0
so they never get set to the sizes returned by the server.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since rpc_task is async, the release function should be called which
will free the impl_id, scope, and owner.
Trond pointed at 2 more problems:
-- use of client pointer after free in the nfs4_exchangeid_release() function
-- cl_count mismatch if rpc_run_task() isn't run
Fixes: 8d89bd70bc9 ("NFS setup async exchange_id") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Cc: stable@vger.kernel.org # 4.9 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I can't reproduce this running sparse here. Likewise, "make W=1
net/sunrpc/xprtrdma/verbs.o" never indicated any issue.
A little poking suggests that because the range of its values is
small, gcc can make the actual width of RPCRDMA_MAX_SEND_SGES
smaller than the width of an unsigned integer.
Fixes: 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Kinglong Mee [Thu, 9 Mar 2017 03:36:36 +0000 (11:36 +0800)]
NFS: fix the fault nrequests decreasing for nfs_inode COPY
The nfs_commit_file for NFSv4.2's COPY operation goes through
the commit path for normal WRITE, but without increase nrequests,
so, the nrequests decreased in nfs_commit_release_pages is fault.
After that, the nrequests will be wrong.
Linus Torvalds [Fri, 17 Mar 2017 19:16:44 +0000 (12:16 -0700)]
Merge tag 'afs-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Fixes to the AFS filesystem in the kernel.
They fix a variety of bugs. These include some issues fixed for
consistency with other AFS implementations:
- handle AFS mode bits better
- use the client mtime rather than the server mtime in the protocol
- handle the server returning more or less data than was requested in
a FetchData call
- distinguish mountpoints from symlinks based on the mode bits rather
than preemptively reading every symlink to find out what it
actually represents
One other notable change for the user is that files are now flushed on
close analogously with other network filesystems"
* tag 'afs-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (28 commits)
afs: Don't wait for page writeback with the page lock held
afs: ->writepage() shouldn't call clear_page_dirty_for_io()
afs: Fix abort on signal while waiting for call completion
afs: Fix an off-by-one error in afs_send_pages()
afs: Fix afs_kill_pages()
afs: Fix page leak in afs_write_begin()
afs: Don't set PG_error on local EINTR or ENOMEM when filling a page
afs: Populate and use client modification time
afs: Better abort and net error handling
afs: Invalid op ID should abort with RXGEN_OPCODE
afs: Fix the maths in afs_fs_store_data()
afs: Use a bvec rather than a kvec in afs_send_pages()
afs: Make struct afs_read::remain 64-bit
afs: Fix AFS read bug
afs: Prevent callback expiry timer overflow
afs: Migrate vlocation fields to 64-bit
afs: security: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
afs: inode: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
afs: Distinguish mountpoints from symlinks by file mode alone
afs: Flush outstanding writes when an fd is closed
...
Linus Torvalds [Fri, 17 Mar 2017 18:25:46 +0000 (11:25 -0700)]
Merge tag 'for-linus-4.11b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A minor fix for using the appropriate refcount_t instead of atomic_t"
* tag 'for-linus-4.11b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers, xen: convert grant_map.users from atomic_t to refcount_t
Philipp Zabel [Fri, 17 Mar 2017 16:34:49 +0000 (17:34 +0100)]
dma-fence: add dma_fence_match_context helper
Add a helper to check if all fences in a fence array are from a given
context. For convenience, the function can also handle being given a
non-array fence.
Linus Torvalds [Fri, 17 Mar 2017 18:19:52 +0000 (11:19 -0700)]
Merge tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Bunch of fixes across the drivers, in a St Patrick's day pull request
(please turn terminal colors to green on black or black on green for
full effect).
On the arm side, tilcdc, omap and malidp got fixes, while amd has some
powermanagement fixes, and intel has a set of fixes across the driver.
Nothing seems to bad or scary at this point"
* tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux: (27 commits)
drm/amd/amdgpu: Fix debugfs reg read/write address width
drm/amdgpu/si: add dpm quirk for Oland
drm/radeon/si: add dpm quirk for Oland
drm: amd: remove broken include path
drm/amd/powerplay: fix copy error in smu7_clockpoweragting.c
drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled
drm/tilcdc: Fix hardcoded fail-return value in tilcdc_crtc_create()
drm/i915: Fix forcewake active domain tracking
drm/i915: Nuke skl_update_plane debug message from the pipe update critical section
drm/i915: use correct node for handling cache domain eviction
uapi: fix drm/omap_drm.h userspace compilation errors
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
drm/amdgpu: fix parser init error path to avoid crash in parser fini
drm/amd/amdgpu: Disable GFX_PG on Carrizo until compute issues solved
drm: mali-dp: Fix smart layer not going to composition
drm: mali-dp: Remove mclk rate management
drm/i915: Drain the freed state from the tail of the next commit
drm/i915: Nuke debug messages from the pipe update critical section
drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl
drm/i915: Store a permanent error in obj->mm.pages
...
Chris Wilson [Thu, 16 Mar 2017 13:19:53 +0000 (13:19 +0000)]
drm/i915: Retire an active batch pool object rather than allocate new
Since obj->active_count is only updated upon retirement, if we see an
active object in the batch pool, double check that is still active
before deciding to allocate a new object.
Chris Wilson [Mon, 13 Mar 2017 11:28:10 +0000 (11:28 +0000)]
drm/i915: Add i810/i815 pci-ids for completeness
To improve our historical record and to simplify userspace that wants to
include i915_pciids.h as its canonical breakdown of PCI IDs and their
respective generations, include the gen1 ids for i810 and i815.
Chris Wilson [Fri, 17 Mar 2017 12:07:16 +0000 (12:07 +0000)]
drm/i915: Skip execlists_dequeue() early if the list is empty
Do an early read of the execlists' queue before we take the spinlock and
start checking. This is safe as the first writer to the execlists queue
will cause the tasklet to be run again after a memory barrier.
v2: Keep guc in sync with execlists queue changes
v3: Explain the mb between the tasklet running on one cpu and the
execlist_first update and schedule from a second cpu.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170317120716.17191-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 16 Mar 2017 13:19:57 +0000 (13:19 +0000)]
drm/i915: Stop using obj->obj_exec_link outside of execbuf
i915_gem_stolen_list_info() sneakily takes advantage of the
obj->obj_exec_link to save itself from having to allocate. Enough of the
subterfuge, just allocate an array of pointers and sort them instead of
the list.
Chris Wilson [Fri, 17 Mar 2017 12:59:18 +0000 (12:59 +0000)]
drm/i915: Squelch WARN for VLV_COUNTER_CONTROL
Before rc6 is initialised (after driver load or resume), the value inside
VLV_COUNTER_CONTROL is undefined so we cannot make an assertion that is
in HIGH_RANGE mode.
Fixes: 6b7f6aa75e38 ("drm/i915: Use coarse grained residency counter with byt")
Testcase: igt/drv_suspend/debugfs-reader Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170317125918.11351-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
It is unclear if the recommendation to disable it for 2x6 configurations
from commit e015dd69b2cf ("drm/i915/bxt: Add WaEnablePooledEuFor2x6")
should also apply to GLK, but it is applied anyway to be on the safe
side. That restriction can be lifted later if determined not to impact
performance.
The extra restriction should not impact user space either. The only user
space that uses this feature is Beignet, and it only does so for 3x6
devices. See See Beignet's commit 6901899ec90a ("Runtime: set the sub
slice according to kernel pooled EU configure.").
v2: Improve commit message. (Mika, Roy)
Cc: Arun Siluvery <arun.siluvery@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Yang Rong <rong.r.yang@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170317140436.24645-1-ander.conselvan.de.oliveira@intel.com
projects / karo-tx-linux.git / log