staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
validBit to valid_bit
victimEntryNum to victim_entry_num
virtualAddr to virtual_addr
xType to xtype
actualValue to actual_value
EASIL1_MMUMMU_IRQSTATUSReadRegister32 to easil1_mmummu_irqstatus_read_register32
EASIL1_MMUMMU_LOCKBaseValueWrite32 to easil1_mmummu_lock_base_value_write32
easiNum to easi_num
expectedValue to expected_value
invalidValue to invalid_value
L1_base to l1_base
L2_base to l2_base
lower16Bits to lower16_bits
lower8Bits to lower8_bits
lowerMiddle8Bits to lower_middle8_bits
lowerUpper8Bits to lower_upper8_bits
maxValidValue to max_valid_value
minValidValue to min_valid_value
newValue to new_value
returnCodeIfMismatch to return_code_if_mismatch
spyCodeIfMisMatch to spy_code_if_mis_match
upper16Bits to upper16_bits
upper8Bits to upper8_bits
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
ulBrdState to brd_state
ulChnl to chnl
ulDspAddr to dsp_add
ulDspDestAddr to dsp_dest_addr
ulDspLoadAddr to dsp_load_addr
ulDspRunAddr to dsp_run_addr
ulDspSrcAddr to dsp_src_addr
ulMapAttrs to map_attr
ulMemType to mem_type
ulRMSFxn to rms_fxn
ulStatus to ret
ulVirtAddr to virt_addr
uNumDesc to num_desc
uNumToDSP to num_to_dsp
uPaSize to pa_size
uPhase to phase
uSegId to segm_id
uStream1 to stream1
uStream2 to stream2
uZId to zid
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
segmentId to segmnt_id
SetPageDirty to set_page_dirty
sizeInBytes to size_in_bytes
sleepCode to sleep_code
Status to status
symName to sym_name
szVar to sz_var
Trapped_Args to trapped_args
TTBPhysAddr to ttb_phys_addr
uChirps to chirps
uChnlId to ch_id
uChnlID to ch_id
uContentSize to cont_size
uDDMAChnlId to ddma_chnl_id
uEvents to events
ulAlign to align_mask
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
puLen to len
pulEntry to entry_pt
pulFxnAddr to fxn_addr
pulId to chan_id
pulSegId to sgmt_id
pVaBuf to va_buf
pVirtualAddress to virtual_address
pwMbVal to mbx_val
pWord to word
pXlatorAttrs to xlator_attrs
registerFxn to register_fxn
rootPersistent to root_prstnt
sectionData to section_data
sectionInfo to section_info
sectionName to section_name
sectName to sec_name
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pstrFxn to str_fxn
pstrLibName to str_lib_name
pstrSect to str_sect
pstrSym to str_sym
pstrZLFileName to str_zl_file_name
pstrZLFile to str_zl_file
pszCoffPath to sz_coff_path
pszMode to sz_mode
pszName to sz_name
pszSectName to sz_sect_name
pszUuid to sz_uuid
pszZlDllName to sz_zl_dll_name
puAddr to addr
pulAddr to addr
pulBufSize to buff_size
pulBytes to nbytes
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pPhysAddr to phys_addr
pPhysicalAddress to physical_address
ppIntfFxns to if_fxns
pProcLoadStat to proc_load_stat
pProcStat to proc_lstat
ppSym to sym_val
pRefData to ref_data
pRef to ref
preservedBit to preserved_bit
pResult to result
procID to proc_id
pSectInfo to sect_inf
pSrc to src
pstrContent to str_content
pstrDummyFile to str_dummy_file
pstrExecFile to str_exec_file
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pMemStatBuf to mem_stat_buf
pMgrAttrs to mgr_attrts
pMgrInfo to mgr_info
pNodeEnv to node_env
pNodeId to node_uuid
pNodeInfo to node_info
pNumLibs to num_libs
pNumPersLibs to num_pers_libs
pObjDef to obj_def
pObjUuid to obj_uuid
poolPhysBase to pool_phys_base
poolSize to pool_size
pPctxt to pctxt
ppDevContext to dev_cntxt
ppDrvInterface to drv_intf
pPersistentDepLibs to prstnt_dep_libs
pPhyAddr to phy_addr
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
phNldrObj to nldr_ovlyobj
phNldr to nldr
phNodeMgr to node_man
pHostBuf to host_buf
pHostConfig to host_config
phRmmMgr to rmm_mgr
phStrmMgr to strm_man
phStrm to strm_objct
phXlator to xlator
physicalAddr to physical_addr
pInfo to channel_info
pIOC to chan_ioc
pLib to lib_obj
pList to lst
pMemBuf to mem_buf
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
phDevContext to device_ctx
phDevNode to dev_nde
phDevObject to device_obj
phDispObject to dispatch_obj
phDmmMgr to dmm_manager
phDrvObject to drv_obj
phDRVObject to drv_obj
phIOMgr to io_man
phLoader to loader
phManager to manager
phMgrObject to mgr_obj
phMgr to mgr
phMsgMgr to msg_man
phMsgQueue to msgq
phNldrNode to nldr_nodeobj
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pdwSize to buff_size
pdwState to board_state
pdwValue to value
pdwVersion to version
pElemExisting to elem_existing
pEntry to entry
pExists to exists
pfEnablePerf to enable_perf
pGenObj to gen_obj
phChnlMgr to channel_mgr
phChnl to chnl
phCodMgr to cod_mgr
phDCDHandle to dcd_handle
phDcdMgr to dcd_mgr
phDehMgr to deh_manager
========================================
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pArb to arb
pbAlreadyAttached to already_attached
pBaseAddr to base_addr
pbHostBuf to host_buff
pBufVa to buf_va
pChnlInfo to channel_info
pConfig to config_param
pContent to content
pContext to context
pdcdProps to dcd_prop
pDepLibUuids to dep_lib_uuids
pDevNodeString to dev_node_strg
pDispAttrs to disp_attrs
pDsp to dsp
pdwAutoStart to auto_start
pdwChnl to chnl
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hStrm to stream_obj
iMode to io_mode
irqMask to irq_mask
lOffset to offset
memPtr to mem_ptr
moduleId to module_id
msgCallback to msg_callback
msgList to msg_list
nArgc to num_argc
nEntryStart to entry_start
nMemSpace to mem_space
nStatus to node_status
nStrms to strms
numLibs to num_libs
numLockedEntries to num_locked_entries
pageSize to page_sz
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hDevContext to dev_ctxt
hDevExtension to dev_extension
hdevObject to device_obj
hDispObject to disp_obj
hDrVObject to driver_obj
hDRVObject to driver_obj
hMGRHandle to mgr_handle
hNldrObject to nldr
hNode1 to node1
hNode2 to node2
hNodeRes to node_resource
hPCtxt to process_ctxt
hProc to proc
hStreamHandle to stream_handle
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
dspAddr to dsp_address
dspAdr to dsp_adr
dspBaseVirt to dsp_base_virt
dwDeviceContext to device_context
dwDSPAddrOffset to dsp_addr_offset
dwDSPAddr to dsp_addr
dwErrInfo to error_info
dwGPPBaseBA to gpp_base_ba
dwMask to mask
dwTimeout to timeout
dwTimeOut to timeout
dwValue to value
entryNum to entry_num
execFile to exec_file
fFlush to flush_data
FlushMemType to flush_mem_type
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
aAddr to addrs
aArgs to args
aSize to len
baseAddress to base_address
bDynamicLoad to dynamic_load
bForce to force
cCharSize to char_size
cContentSize to content_size
cCount to count
cDspCharSize to dsp_char_size
cIndex to index
ClkId to clock_id
cOrigin to origin
dataBasePhys to data_base_phys
dcdObjUnion to dcd_obj
deviceContext to device_ctxt
========================================
Ky Srinivasan [Thu, 20 May 2010 18:54:06 +0000 (12:54 -0600)]
Staging: hyperv: add clocksource driver
This patch is a clocksource implementation suitable for guests hosted on
HyperV. Time keeping in Linux guests hosted on HyperV is unstable. This
clocksource driver fixes the problem. This driver uses the hyperv
detection code integrated into the kernel.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Fri, 2 Jul 2010 23:44:13 +0000 (16:44 -0700)]
Staging: solo: add delay.h header
Several solo drivers need <linux/delay.h>, so add it to the
private solo6010.h header file.
drivers/staging/solo6x10/solo6010-core.c:191: error: implicit declaration of function 'mdelay'
drivers/staging/solo6x10/solo6010-tw28.c:181: error: implicit declaration of function 'msleep_interruptible'
drivers/staging/solo6x10/solo6010-gpio.c:78: error: implicit declaration of function 'udelay'
drivers/staging/solo6x10/solo6010-v4l2-enc.c:254: error: implicit declaration of function 'mdelay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Peter Huewe [Wed, 7 Jul 2010 02:52:16 +0000 (04:52 +0200)]
Staging: panel: Prevent double-calling of parport_release - fix oops.
This patch prevents the code from calling parport_release and
parport_unregister_device twice with the same arguments - and thus fixes an oops.
Rationale:
After the first call the parport is already released and the
handle isn't valid anymore and calling parport_release and
parport_unregister_device twice isn't a good idea.
Dave Jones [Sat, 3 Jul 2010 03:04:44 +0000 (23:04 -0400)]
Staging: rtl8192u: remove a copy of 80211.h
We had a request to enable one of the realtek network drivers in staging in Fedora.
After a quick lookover, I decided this wasn't such a great idea.
In doing so though, I noticed we have 6 copies of ieee80211.h there now,
Two drivers even have two copies of it. (Even worse, cleanups have been pointlessly
happening to both files). The patch below removes one of them, which is asides
from whitespace, identical afaics. With a change of filename to the #include,
it all still compiles for me.
A better fix would be to remove both, and have them use the core ieee80211 stuff,
but this is at least a tiny step in the right direction.
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gustavo Silva [Sat, 26 Jun 2010 22:36:53 +0000 (17:36 -0500)]
Staging: otus: fix coding style issues in ioctl.c
This is a patch to the ioctl.c file that fixes up the following
issues:
ERROR: that open brace { should be on the previous line x 3
WARNING: please, no space before tabs x 1
ERROR: space required before the open parenthesis '(' x 5
WARNING: braces {} are not necessary for single statement blocks x 2
ERROR: space prohibited after that '!' (ctx:BxW) x 1
WARNING: suspect code indent for conditional statements x 2
ERROR: do not use C99 // comments x 1
WARNING: braces {} are not necessary for any arm of this statement x 4
Providing a context which can be passed around the driver, the KIM's platform
driver's struct device to be used to dev_set_drvdata and dev_get_drvdata.
The ST core's data is passed around using tty's disc_data and in other
cases the ST KIM's platform device is exposed from the board-XX.c which
adds KIM platform device whose dev is used.
Thereby remove the need for the global reference struct kim_data_s *kim_gdata;
An important TODO was to remove global references in TI-ST driver,
thereby providing a context to the driver.
This should also serve as a small step in removal of the single device
limit.
Staging: batman-adv: Add last-seen in originator table
Right now, there is no easy/intuitive way to find out whether a node
might have vanished. This commit adds the time when a node was last seen
to the originator table output, so that a common user is able to tell
whether a node might have gone without having to wait PURGE_TIMEOUT
seconds until that node gets "garbe-collected".
It also puts the the versioning information in an extra line, as
the first one of this debug output would otherwise get too long.
Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Tue, 6 Jul 2010 19:05:17 +0000 (21:05 +0200)]
Staging: batman-adv: Move printk to simplified macros
Each general printk which is not informative by itself for a specific
batX device were moved to pr_(info|warning|err) as it provides an easy
interface which for example resolves the problem to add the prefix
"batman-adv: " before each line.
All information which is specific to a batX device will be printed using
a bat_(info|err|warning) macro to prefix it also with "batman-adv:
batX:" in each line.
Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Tue, 6 Jul 2010 19:05:16 +0000 (21:05 +0200)]
Staging: batman-adv: add routing debug log accessible via debugfs
All routing debug messages are saved in a ring buffer that can be
read via the debugfs file "log".
Note that CONFIG_BATMAN_ADV_DEBUG must be activated to have the
debug logs compiled in.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-beck.git / log