V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driver

This is the hw module for DM644x CCDC. This registers with the
vpfe capture driver and provides a set of hw_ops to configure
CCDC for a specific decoder device connected to the VPFE.

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12250): v4l: dm355 ccdc module for vpfe capture driver

Adds ccdc hw module for DM355 CCDC. This registers with the bridge
driver a set of hw_ops for configuring the CCDC for a specific
decoder device connected to vpfe.

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12249): v4l: ccdc hw device header file for vpfe capture

Adds ccdc hw device header for vpfe capture driver

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12248): v4l: vpfe capture bridge driver for DM355 and DM6446

This the vpfe capture bridge driver for doing video
capture on DM355 and DM6446 evms. The ccdc hw modules register with the
driver and are used for configuring the CCD Controller for a specific
decoder interface. The driver also registers the sub devices required
for a specific evm. More than one sub devices can be registered.
This allows driver to switch dynamically to capture video from
any sub device that is registered. Currently only one sub device
(tvp5146) is supported. But in future this driver is expected
to do capture from sensor devices such as Micron's MT9T001, MT9T031
and MT9P031 etc. The driver currently supports MMAP based IO.

Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed by: Alexey Klimov <klimov.linux@gmail.com>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12247): tvp514x: formatting comments as per kernel documentation

Fix documentation style based on comments from Mauro.

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12246): tvp514x: Migration to sub-device framework

This patch converts TVP514x driver to sub-device framework
from V4L2-int framework.

[hverkuil@xs4all.nl: remove inline from the dump_reg function]
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12201): adv7343: remove unused #include <linux/version.h>

Remove unused #include <linux/version.h>'s in drivers/media/video/adv7343.c.

Cc: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12178): vpif_display: Fix compile time warnings for mutex locking

mutex_lock_interruptible return value has to be handled properly to indicate
the status to the higher layers of the kernel.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12177): dm646x: Add an entry for dm646x EVM card at building system

Makefile and Kconfig changes for DM646x Video Display device, using
davinci/vpif, adv7343 and ths7303 drivers.

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12176): davinci/vpif_display: Add VPIF display driver

Adds the VPIF display driver and the associated header file.

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12175): davinci/vpif: Add Video Port Interface (VPIF) driver

This code be used by the display and capture drivers.

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12992): gspca - m5602-ov7660: Disable red and blue gain for now

Red and blue gain isn't handled in conformance with the v4l2 specification. Disable them for now.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12991): gspca - m5602-ov7660: Remove redundant init writes

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12990): gspca - m5602-ov7660: Don't set blue and red gain during init

Don't set blue and red gain during init as we manuall set it later

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12989): gspca - m5602-ov7660: Don't set gain during init

We manually set the gain later, no need to do it during init

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12988): gspca - m5602-ov7660: Remove old init

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12987): gspca - m5602-ov7660: Set the hsync correctly

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12986): gspca - m5602-ov7660: Add hflip, vflip controls

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12985): gspca - m5602-ov7660: Replace magic constants with defines

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12984): gspca - m5602-ov7660: Use a new raw init

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12983): gspca - m5602-ov7660: Add auto exposure ctrl

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12982): gspca - m5602-ov7660: Add auto gain ctrl

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12981): gspca - m5602-ov7660: Set blue and red gain at init

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12980): gspca - m5602-ov7660: Create auto white balance ctrl

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12979): gspca - m5602-ov7660: Ensure that the default exposure is set

Ensure that the default exposure value is set at startup

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12978): gspca - m5602-ov7660: Add red gain control

Hook up the red gain controller

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12977): gspca - m5602-ov7660: Create blue gain control

Hook up a blue gain v4l2 controller

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12976): SAA7164: Removed bus registration messages from driver startup

SAA7164: Removed bus registration messages from driver startup

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12975): SAA7164: Remove the i2c client_attach/detach support, no longer required.

SAA7164: Remove the i2c client_attach/detach support, no longer required.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12974): SAA7164: Remove the SAA7164 bus id, no longer required.

SAA7164: Remove the SAA7164 bus id, no longer required.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Docbook/media: Fix some issues at the docbooks

- Add a few missing entities;
- Some text fixes at remote controllers;
- Add a missing tag at videodev2.h xml version.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12970): saa7164: fix 64bit build warning

Fix the following build warning:

  CC [M]  saa7164-core.o
saa7164-core.c: In function 'saa7164_buffer_deliver':
saa7164-core.c:113: warning: passing argument 2 of 'dvb_dmx_swfilter_packets'
    from incompatible pointer type

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12968): saa7164: fix Kconfig: remove HOTPLUG dependency

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12967): saa7164: fix Kconfig: rename DVB_FE_CUSTOMIZE to MEDIA_TUNER_CUSTOMISE

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12964): tuner-core: add support for NXP TDA18271 without TDA829X demod

Add support for NXP TDA18271 as a standalone tuner, allowing the use of
analog demodulators other than the Philips/NXP TDA829x.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12962): ce6230: increase BULK transfer size from 512 to 8192

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12960): anysee: coding style fix

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12959): anysee: increase BULK transfer size from 512 to 8192

increase BULK transfer size from 512 to 8192 to increase wakeups

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12957): Fix MAC address reading from EEPROM in NetUP Dual DVB-S2 CI card.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12956): Fix gpio mutex in NetUP Dual DVB-S2 CI card.

The card uses the same cx23885 gpio lines for two adapters.
In case of there is several cards in system we must implement
gpio mutex per cx23885 chip.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams

- add the Genesys Logic 05e3:0503 and 05e3:f191 webcam

Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12953): gspca - vc032x: Bad GPIO of the Samsung Q1 on start/stop streaming.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12951): em28xx: add Reddo DVB-C USB TV Box

Support for Reddo DVB-C USB TV Box device. Remote is not working yet.
Thanks to Benjamin Larsson <banan@ludd.ltu.se>

Cc: Benjamin Larsson <banan@ludd.ltu.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12950): tuner-simple: add Philips CU1216L

add Philips CU1216L NIM

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12948): v4l1-compat: fix VIDIOC_G_STD handling

The VIDIOC_G_STD ioctl may not be present in the case of radio receivers.
In that case G_STD will return an error. The v4l1-compat layer should not
attempt to propagate that error to the caller, instead it should be
ignored.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12946): SAA7164: Add support for a new HVR-2250 hardware revision

SAA7164: Add support for a new HVR-2250 hardware revision

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12945): SAA7164: Ensure the HVR-2200 second tuner is configured in slave mode.

SAA7164: Ensure the HVR-2200 second tuner is configured in slave mode.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12944): SAA7164: Minor i2c assignment cleanup

SAA7164: Minor i2c assignment cleanup

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12943): SAA7164: Add a warning about addr usage

SAA7164: Remove meaningless if'0 code

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12942): SAA7164: HVR2250 changes related to attach time tuner configuration

Ensure that by default all tuners are set correctly to master/slave mode.
For all HVR2250's, ensure slave based tuners are caliberated during attach
to avoid locking problems on tuner# above channel 91.

HVR2200 tuner attach time to be reviewed in a future patch.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12941): SAA7164: Removed spurious debug

SAA7164: Removed spurious debug

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12940): SAA7164: IRQ / message timeout related change

In some cases we're seeing large timeouts on commands. I'm changing the
implementation so that the deferred worker checks the PCI bus for
any messages and signals the waiting caller accordingly. The previous
mechanism was too unreliable.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12939): SAA7164: Removed a duplicate call to address any PCI quirks.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12938): SAA7164: Increase the firmware command timeout to avoid firmware errors.

The firmware typically responds in < 50ms and, via the interrupts and
deferred work queue the caller (blocked in the driver) is signalled very
efficiently. In a highly stressed system this can take many multiples
of seconds. So, we need a larger maximum timeout for busy systems.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12937): SAA7164: Cleanup a printk

Cleanup a printk and output two helpful driver params in debug mode.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12936): SAA7164: Added waitsecs module parameter

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12935): SAA7164: Ensure we specify I/F's for all bandwidths

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12934): SAA7164: Fix i2c eeprom read errors during load (some boards).

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12933): SAA7164: Fix IRQ related system hang when firmware is not found.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12932): SAA7164: Fixed the missing eeprom parse on a specific board.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12931): SAA7164: Fix the 88021 definition to work with production boards.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12930): SAA7164: Removed spurious I2C errors during driver load with DVB-T boards.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12929): SAA7164: OOPS avoidance during interrupt handling

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12928): SAA7164: Increase firmware load tolerance

It's timing out and aborting firmware load too quickly on some
platforms, this increases the upper limit.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12927): SAA7164: Remove volatiles for PCI writes (coding style violation)

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12926): SAA7164: Email address change

SAA7164: Email address change

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12925): SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lock

SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lock

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12924): SAA7164: Fix some 32/64bit compile time warnings

SAA7164: Fix some 32/64bit compile time warnings

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon

This patch adds support for all of the known shipping Hauppauge HVR-2200
and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this
time. Both tuners are supported.

Volatiles and typedefs need rework, the rest is coding style compliant.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12922): Add the SAA7164 I2C bus identifier

Add the SAA7164 I2C bus identifier

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12920): DocBook/media: Some xmlto or DTD's don't accept reference inside appendix

That was weird: on some distros, we need to remove <reference> tag
for it to work.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12919): DocBook/media: fix some DocBook non-compliances

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12917): DocBook/media: add V4L2_PIX_FMT_TM6000

This is a proprietary format found with Trident tm6000 series of
chipsets.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12915): DocBook/media: Add isdb-t documentation

Adds ISDB-T_and_ISDB-Tsb_with_S2API spec converted into DocBook format.

The text is authored by Patrick Boettcher, and was converted to DocBook
by me.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12906): dib0700: Add support for Prolink SBTVD

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12903): DiB8000: fix channel search parameter initialization

This patch is fixing the initialization of the channel search parameters.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12902): Documentation: synchronize documentation for Technisat cards

The patch does the following:

a. it synchronizes /Documentation/dvb/technisat.txt to the current kernel
design
b. it syncs Trent Piepho' s latest changes to the flexcop driver concept:
implementation of the dvb pll library for some cards that need it

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12901): DiB0700: add support for STK807XP and STK807XPVR

This patchs adds support for the DiB8000 based devices STK807xP and
STK807xPVR to the dib0700-device-tree.

[mchehab@redhat.com: Fix merge conflicts]

Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000

This commit adds support for the DiB8000 ISDB-T demodulator made by DiBcom.

Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12899): DiB0070: Indenting driver with indent -linux

In order to follow a little bit the kernel coding style from now on
after the generation of that driver file and indent -linux call is
emitted.

Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12898): DiB0070: Update to latest internal release

General update of the dib0070-driver based on DiBcom's latest release.

New driver features can enable better performance in some reception situations.

Signed-off-by: Patrick Boettcher <Patrick.Boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12896): ISDB-T: add mapping of LAYER_ENABLED to frontend-cache

It was forgotten to map the LAYER_ENABLED ioctl to the frontend-cache and back.

Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12892): DVB-API: add support for ISDB-T and ISDB-Tsb (version 5.1)

This patch increments the DVB-API to version 5.1 in order to reflect the addition of ISDB-T and ISDB-Tsb on Linux' DVB-API.

Changes in detail:
- added a small document to describe how to use the API to tune to an ISDB-T or ISDB-Tsb channel
- added necessary fields to dtv_frontend_cache
- added a smarter clear-cache function which resets all fields of the dtv_frontend_cache
- added a TRANSMISSION_MODE_4K to fe_transmit_mode_t

Signed-off-by: Olivier Grenie <olgrenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook/media: Remove Satellites from Analog TV Tuners and Modulators

There were never any satellite support for analog, and adding it
right now doesn't make sense. For digital TV, this is already
covered at part II.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook/media: update dvb url's and use ulink tag instead of emphasis

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook/media: fix some broken links

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook/media: Some typo fixes

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook: Don't use graphics callouts

By default, when a callout is used, DocBook will try to use
a graphics image for callouts. This requires that the graphics
to be copied to the documentation directory. As this is not
done, use the text callouts: (1), (2), ...

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook/media: copy also the pictures to the proper place

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

DocBook/media: renamed xml documents to tmpl

DocBook makefile expects that the documents to be in tmpl extension,
since it has some preprocessing that it is done on it. This preprocessing
is not needed currently, but, as it removes the xml versions, we're
forced to rename anyway.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12889): DIB0700: added USB IDs for a Terratec DVB-T XXS

Since there is now correct support for the DiB7770 the support for the
'Terratec Cinergy T USB XXS (HD)' can be added.

One USB-ID has been moved, another one has been added.

Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12888): STK7770P: Add support for STK7770P

Added support for the dib7770P and the STK7770P

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12887): DIB7000P: SNR calcuation forr DiB7000P

Add the SNR monitoring for the dib7000p. The result is in dB.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12886): Added new Pinnacle USB devices

Added Pinnacle PCTV USB devices based on PCTV 73e.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12884): cx18: Eliminate warning about discarding 'const' is assignment for IR init

i2c-kbd-i2c allows a bridge driver to pass information about IR configuration,
but uses a "void *" to pass along what is essentially constant data.  This
change casts a const * to a void * to remove the warning.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12882): em28xx: remove text editor tags from em28xx-vbi.c

Remove some emacs tags from em28xx-vbi.c, which were copied from cx88-vbi.c,
per Mauro Carvalho Chehab's request.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12881): em28xx: fix codingstyle issues in em28xx-video.c

Fix some codingstyle issues introduced during the addition of em28xx VBI
support.  The patch makes no functional changes other than converting a few
debug printk() statements to em28xx_isocdbg.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12880): em28xx: fix codingstyle issues introduced with VBI support

Fix a few codingstyle issues introduced when I was adding the VBI support to
the em28xx driver.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12878): gspca - m5602-s5k4aa: Add vflip quirk for the GX700

The MSI GX700 is a tricky machine to support. Some revisions do need the sensor flipped, but not all.
Add another quirk, distinguished by its BIOS date.

Signed-off-by: Brian Kloppenborg <bkloppenborg@gmail.com>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (12877): gspca - m5602-s5k4aa: Add vflip quirk for the Amilo Pa 2548

Add vflip quirk for the Fujitsu Siemens Amilo Pa 2548

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>