Shaohua Li [Tue, 13 Dec 2016 00:41:50 +0000 (16:41 -0800)]
mm/vmscan.c: set correct defer count for shrinker
Our system uses significantly more slab memory with memcg enabled with
the latest kernel. With 3.10 kernel, slab uses 2G memory, while with
4.6 kernel, 6G memory is used. The shrinker has problem. Let's see we
have two memcg for one shrinker. In do_shrink_slab:
1. Check cg1. nr_deferred = 0, assume total_scan = 700. batch size
is 1024, then no memory is freed. nr_deferred = 700
2. Check cg2. nr_deferred = 700. Assume freeable = 20, then
total_scan = 10 or 40. Let's assume it's 10. No memory is freed.
nr_deferred = 10.
The deferred share of cg1 is lost in this case. kswapd will free no
memory even run above steps again and again.
The fix makes sure one memcg's deferred share isn't lost.
Link: http://lkml.kernel.org/r/2414be961b5d25892060315fbb56bb19d81d0c07.1476227351.git.shli@fb.com Signed-off-by: Shaohua Li <shli@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Tue, 13 Dec 2016 00:41:47 +0000 (16:41 -0800)]
mm/mprotect.c: don't touch single threaded PTEs which are on the right node
We had some problems with pages getting unmapped in single threaded
affinitized processes. It was tracked down to NUMA scanning.
In this case it doesn't make any sense to unmap pages if the process is
single threaded and the page is already on the node the process is
running on.
Add a check for this case into the numa protection code, and skip
unmapping if true.
In theory the process could be migrated later, but we will eventually
rescan and unmap and migrate then.
In theory this could be made more fancy: remembering this state per
process or even whole mm. However that would need extra tracking and be
more complicated, and the simple check seems to work fine so far.
David Rientjes [Tue, 13 Dec 2016 00:41:44 +0000 (16:41 -0800)]
mm, slab: maintain total slab count instead of active count
Rather than tracking the number of active slabs for each node, track the
total number of slabs. This is a minor improvement that avoids active
slab tracking when a slab goes from free to partial or partial to free.
For slab debugging, this also removes an explicit free count since it
can easily be inferred by the difference in number of total objects and
number of active objects.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1612042020110.115755@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Suggested-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Greg Thelen <gthelen@google.com> Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Thelen [Tue, 13 Dec 2016 00:41:41 +0000 (16:41 -0800)]
mm, slab: faster active and free stats
Reading /proc/slabinfo or monitoring slabtop(1) can become very
expensive if there are many slab caches and if there are very lengthy
per-node partial and/or free lists.
Commit 07a63c41fa1f ("mm/slab: improve performance of gathering slabinfo
stats") addressed the per-node full lists which showed a significant
improvement when no objects were freed. This patch has the same
motivation and optimizes the remainder of the usecases where there are
very lengthy partial and free lists.
This patch maintains per-node active_slabs (full and partial) and
free_slabs rather than iterating the lists at runtime when reading
/proc/slabinfo.
When allocating 100GB of slab from a test cache where every slab page is
on the partial list, reading /proc/slabinfo (includes all other slab
caches on the system) takes ~247ms on average with 48 samples.
As a result of this patch, the same read takes ~0.856ms on average.
[rientjes@google.com: changelog] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1611081505240.13403@chino.kir.corp.google.com Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Garnier [Tue, 13 Dec 2016 00:41:38 +0000 (16:41 -0800)]
mm/slab_common.c: check kmem_create_cache flags are common
Verify that kmem_create_cache flags are not allocator specific. It is
done before removing flags that are not available with the current
configuration.
The current kmem_cache_create removes incorrect flags but do not
validate the callers are using them right. This change will ensure that
callers are not trying to create caches with flags that won't be used
because allocator specific.
Link: http://lkml.kernel.org/r/1478553075-120242-2-git-send-email-thgarnie@google.com Signed-off-by: Thomas Garnier <thgarnie@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 13 Dec 2016 00:41:35 +0000 (16:41 -0800)]
slub: avoid false-postive warning
The slub allocator gives us some incorrect warnings when
CONFIG_PROFILE_ANNOTATED_BRANCHES is set, as the unlikely() macro
prevents it from seeing that the return code matches what it was before:
mm/slub.c: In function `kmem_cache_free_bulk':
mm/slub.c:262:23: error: `df.s' may be used uninitialized in this function [-Werror=maybe-uninitialized]
mm/slub.c:2943:3: error: `df.cnt' may be used uninitialized in this function [-Werror=maybe-uninitialized]
mm/slub.c:2933:4470: error: `df.freelist' may be used uninitialized in this function [-Werror=maybe-uninitialized]
mm/slub.c:2943:3: error: `df.tail' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I have not been able to come up with a perfect way for dealing with
this, the three options I see are:
- add a bogus initialization, which would increase the runtime overhead
- replace unlikely() with unlikely_notrace()
- remove the unlikely() annotation completely
I checked the object code for a typical x86 configuration and the last
two cases produce the same result, so I went for the last one, which is
the simplest.
Link: http://lkml.kernel.org/r/20161024155704.3114445-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Laura Abbott <labbott@fedoraproject.org> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Tue, 13 Dec 2016 00:41:32 +0000 (16:41 -0800)]
slub: move synchronize_sched out of slab_mutex on shrink
synchronize_sched() is a heavy operation and calling it per each cache
owned by a memory cgroup being destroyed may take quite some time. What
is worse, it's currently called under the slab_mutex, stalling all works
doing cache creation/destruction.
Actually, there isn't much point in calling synchronize_sched() for each
cache - it's enough to call it just once - after setting cpu_partial for
all caches and before shrinking them. This way, we can also move it out
of the slab_mutex, which we have to hold for iterating over the slab
cache list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=172991 Link: http://lkml.kernel.org/r/0a10d71ecae3db00fb4421bcd3f82bcc911f4be4.1475329751.git.vdavydov.dev@gmail.com Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reported-by: Doug Smythies <dsmythies@telus.net> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Tue, 13 Dec 2016 00:41:29 +0000 (16:41 -0800)]
mm: memcontrol: use special workqueue for creating per-memcg caches
Creating a lot of cgroups at the same time might stall all worker
threads with kmem cache creation works, because kmem cache creation is
done with the slab_mutex held. The problem was amplified by commits 801faf0db894 ("mm/slab: lockless decision to grow cache") in case of
SLAB and 81ae6d03952c ("mm/slub.c: replace kick_all_cpus_sync() with
synchronize_sched() in kmem_cache_shrink()") in case of SLUB, which
increased the maximal time the slab_mutex can be held.
To prevent that from happening, let's use a special ordered single
threaded workqueue for kmem cache creation. This shouldn't introduce
any functional changes regarding how kmem caches are created, as the
work function holds the global slab_mutex during its whole runtime
anyway, making it impossible to run more than one work at a time. By
using a single threaded workqueue, we just avoid creating a thread per
each work. Ordering is required to avoid a situation when a cgroup's
work is put off indefinitely because there are other cgroups to serve,
in other words to guarantee fairness.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=172981 Link: http://lkml.kernel.org/r/20161004131417.GC1862@esperanza Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reported-by: Doug Smythies <dsmythies@telus.net> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Deepa Dinamani [Tue, 13 Dec 2016 00:41:26 +0000 (16:41 -0800)]
ocfs2: replace CURRENT_TIME macro
CURRENT_TIME is not y2038 safe.
Use y2038 safe ktime_get_real_seconds() here for timestamps. struct
heartbeat_block's hb_seq and deletetion time are already 64 bits wide
and accommodate times beyond y2038.
Also use y2038 safe ktime_get_real_ts64() for on disk inode timestamps.
These are also wide enough to accommodate time64_t.
Link: http://lkml.kernel.org/r/1475365298-29236-1-git-send-email-deepa.kernel@gmail.com Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Deepa Dinamani [Tue, 13 Dec 2016 00:41:23 +0000 (16:41 -0800)]
ocfs2: use time64_t to represent orphan scan times
struct timespec is not y2038 safe. Use time64_t which is y2038 safe to
represent orphan scan times. time64_t is sufficient here as only the
seconds delta times are relevant.
Also use appropriate time functions that return time in time64_t format.
Time functions now return monotonic time instead of real time as only
delta scan times are relevant and these values are not persistent across
reboots.
The format string for the debug print is still using long as this is
only the time elapsed since the last scan and long is sufficient to
represent this value.
Link: http://lkml.kernel.org/r/1475365138-20567-1-git-send-email-deepa.kernel@gmail.com Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ashish Samant [Tue, 13 Dec 2016 00:41:20 +0000 (16:41 -0800)]
ocfs2: fix double put of recount tree in ocfs2_lock_refcount_tree()
In ocfs2_lock_refcount_tree, if ocfs2_read_refcount_block() returns an
error, we do ocfs2_refcount_tree_put twice (once in
ocfs2_unlock_refcount_tree and once outside it), thereby reducing the
refcount of the refcount tree twice, but we dont delete the tree in this
case. This will make refcnt of the tree = 0 and the
ocfs2_refcount_tree_put will eventually call ocfs2_mark_lockres_freeing,
setting OCFS2_LOCK_FREEING for the refcount_tree->rf_lockres.
The error returned by ocfs2_read_refcount_block is propagated all the
way back and for next iteration of write, ocfs2_lock_refcount_tree gets
the same tree back from ocfs2_get_refcount_tree because we havent
deleted the tree. Now we have the same tree, but OCFS2_LOCK_FREEING is
set for rf_lockres and eventually, when _ocfs2_lock_refcount_tree is
called in this iteration, BUG_ON( __ocfs2_cluster_lock:1395 ERROR:
Cluster lock called on freeing lockres T00000000000000000386019775b08d!
flags 0x81) is triggerred.
Call stack:
(loop16,11155,0):ocfs2_lock_refcount_tree:482 ERROR: status = -5
(loop16,11155,0):ocfs2_refcount_cow_hunk:3497 ERROR: status = -5
(loop16,11155,0):ocfs2_refcount_cow:3560 ERROR: status = -5
(loop16,11155,0):ocfs2_prepare_inode_for_refcount:2111 ERROR: status = -5
(loop16,11155,0):ocfs2_prepare_inode_for_write:2190 ERROR: status = -5
(loop16,11155,0):ocfs2_file_write_iter:2331 ERROR: status = -5
(loop16,11155,0):__ocfs2_cluster_lock:1395 ERROR: bug expression:
lockres->l_flags & OCFS2_LOCK_FREEING
(loop16,11155,0):__ocfs2_cluster_lock:1395 ERROR: Cluster lock called on
freeing lockres T00000000000000000386019775b08d! flags 0x81
piaojun [Tue, 13 Dec 2016 00:41:17 +0000 (16:41 -0800)]
ocfs2: clean up unused 'page' parameter in ocfs2_write_end_nolock()
'page' parameter in ocfs2_write_end_nolock() is never used.
Link: http://lkml.kernel.org/r/582FD91A.5000902@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
piaojun [Tue, 13 Dec 2016 00:41:14 +0000 (16:41 -0800)]
ocfs2/dlm: clean up deadcode in dlm_master_request_handler()
When 'dispatch_assert' is set, 'response' must be DLM_MASTER_RESP_YES,
and 'res' won't be null, so execution can't reach these two branch.
Link: http://lkml.kernel.org/r/58174C91.3040004@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
piaojun [Tue, 13 Dec 2016 00:41:08 +0000 (16:41 -0800)]
ocfs2/dlm: clean up useless BUG_ON default case in dlm_finalize_reco_handler()
The value of 'stage' must be between 1 and 2, so the switch can't reach
the default case.
Link: http://lkml.kernel.org/r/57FB5EB2.7050002@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee [Tue, 13 Dec 2016 00:40:57 +0000 (16:40 -0800)]
m32r: fix build warning
While building m32r defconfig we got warnings:
arch/m32r/platforms/m32700ut/setup.c:249:24: warning: 'm32700ut_lcdpld_irq_type' defined but not used [-Wunused-variable]
m32700ut_lcdpld_irq_type is only used when CONFIG_USB is enabled.
Modify the code to declare the related variables and functions only when
CONFIG_USB is enabled.
Sudip Mukherjee [Tue, 13 Dec 2016 00:40:54 +0000 (16:40 -0800)]
m32r: add simple dma
Some builds of m32r were failing as it tried to build few drivers which
needed dma but m32r is not having dma support. Objections were raised
when it was tried to make those drivers depend on HAS_DMA. So the next
best thing is to add dma support to m32r. dma_noop is a very simple dma
with 1:1 memory mapping.
Sam Protsenko [Tue, 13 Dec 2016 00:40:51 +0000 (16:40 -0800)]
scripts/tags.sh: handle OMAP platforms properly
When SUBARCH is "omap1" or "omap2", plat-omap/ directory must be
indexed. Handle this special case properly.
While at it, check if mach- directory exists at all.
Link: http://lkml.kernel.org/r/20161202122148.15001-1-joe.skb7@gmail.com Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Cc: Michal Marek <mmarek@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
prctl: remove one-shot limitation for changing exe link
This limitation came with the reason to remove "another way for
malicious code to obscure a compromised program and masquerade as a
benign process" by allowing "security-concious program can use this
prctl once during its early initialization to ensure the prctl cannot
later be abused for this purpose":
This explanation doesn't look sufficient. The only thing "exe" link is
indicating is the file, used to execve, which is basically nothing and
not reliable immediately after process has returned from execve system
call.
Moreover, to use this feture, all the mappings to previous exe file have
to be unmapped and all the new exe file permissions must be satisfied.
Which means, that changing exe link is very similar to calling execve on
the binary.
The need to remove this limitations comes from migration of NFS mount
point, which is not accessible during restore and replaced by other file
system. Because of this exe link has to be changed twice.
[akpm@linux-foundation.org: fix up comment] Link: http://lkml.kernel.org/r/20160927153755.9337.69650.stgit@localhost.localdomain Signed-off-by: Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: John Stultz <john.stultz@linaro.org> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Iooss [Tue, 13 Dec 2016 00:40:39 +0000 (16:40 -0800)]
kthread: add __printf attributes
When commit fbae2d44aa1d ("kthread: add kthread_create_worker*()")
introduced some kthread_create_...() functions which were taking
printf-like parametter, it introduced __printf attributes to some
functions (e.g. kthread_create_worker()). Nevertheless some new
functions were forgotten (they have been detected thanks to
-Wmissing-format-attribute warning flag).
Add the missing __printf attributes to the newly-introduced functions in
order to detect formatting issues at build-time with -Wformat flag.
Link: http://lkml.kernel.org/r/20161126193543.22672-1-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 12 Dec 2016 20:58:50 +0000 (12:58 -0800)]
Merge branch 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Ingo Molnar:
"The main changes in this development cycle were:
- more AMD northbridge support work, mostly in preparation for Fam17h
CPUs (Yazen Ghannam, Borislav Petkov)
- cleanups/refactorings and fixes (Borislav Petkov, Tony Luck,
Yinghai Lu)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Include the PPIN in MCE records when available
x86/mce/AMD: Add system physical address translation for AMD Fam17h
x86/amd_nb: Add SMN and Indirect Data Fabric access for AMD Fam17h
x86/amd_nb: Add Fam17h Data Fabric as "Northbridge"
x86/amd_nb: Make all exports EXPORT_SYMBOL_GPL
x86/amd_nb: Make amd_northbridges internal to amd_nb.c
x86/mce/AMD: Reset Threshold Limit after logging error
x86/mce/AMD: Fix HWID_MCATYPE calculation by grouping arguments
x86/MCE: Correct TSC timestamping of error records
x86/RAS: Hide SMCA bank names
x86/RAS: Rename smca_bank_names to smca_names
x86/RAS: Simplify SMCA HWID descriptor struct
x86/RAS: Simplify SMCA bank descriptor struct
x86/MCE: Dump MCE to dmesg if no consumers
x86/RAS: Add TSC timestamp to the injected MCE
x86/MCE: Do not look at panic_on_oops in the severity grading
Linus Torvalds [Mon, 12 Dec 2016 20:53:54 +0000 (12:53 -0800)]
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull hotplug API fix from Ingo Molnar:
"Late breaking fix from the v4.9 cycle: fix a hotplug register/
unregister notifier API asymmetry bug that can cause kernel warnings
(and worse) with certain Kconfig combinations"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hotplug: Make register and unregister notifier API symmetric
Linus Torvalds [Mon, 12 Dec 2016 20:15:10 +0000 (12:15 -0800)]
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main scheduler changes in this cycle were:
- support Intel Turbo Boost Max Technology 3.0 (TBM3) by introducig a
notion of 'better cores', which the scheduler will prefer to
schedule single threaded workloads on. (Tim Chen, Srinivas
Pandruvada)
- enhance the handling of asymmetric capacity CPUs further (Morten
Rasmussen)
- improve/fix load handling when moving tasks between task groups
(Vincent Guittot)
- simplify and clean up the cputime code (Stanislaw Gruszka)
- make struct kthread kmalloc()ed and related fixes (Oleg Nesterov)
- add uaccess atomicity debugging (when using access_ok() in the
wrong context), under CONFIG_DEBUG_ATOMIC_SLEEP=y (Peter Zijlstra)
- implement various fixes, cleanups and other enhancements (Daniel
Bristot de Oliveira, Martin Schwidefsky, Rafael J. Wysocki)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched/core: Use load_avg for selecting idlest group
sched/core: Fix find_idlest_group() for fork
kthread: Don't abuse kthread_create_on_cpu() in __kthread_create_worker()
kthread: Don't use to_live_kthread() in kthread_[un]park()
kthread: Don't use to_live_kthread() in kthread_stop()
Revert "kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function"
kthread: Make struct kthread kmalloc'ed
x86/uaccess, sched/preempt: Verify access_ok() context
sched/x86: Make CONFIG_SCHED_MC_PRIO=y easier to enable
sched/x86: Change CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIO
x86/sched: Use #include <linux/mutex.h> instead of #include <asm/mutex.h>
cpufreq/intel_pstate: Use CPPC to get max performance
acpi/bus: Set _OSC for diverse core support
acpi/bus: Enable HWP CPPC objects
x86/sched: Add SD_ASYM_PACKING flags to x86 ITMT CPU
x86/sysctl: Add sysctl for ITMT scheduling feature
x86: Enable Intel Turbo Boost Max Technology 3.0
x86/topology: Define x86's arch_update_cpu_topology
sched: Extend scheduler's asym packing
sched/fair: Clean up the tunable parameter definitions
...
Linus Torvalds [Mon, 12 Dec 2016 19:46:21 +0000 (11:46 -0800)]
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"This update is pretty big and almost exclusively includes tooling
changes, because v4.9's LTS status forced to completion most of the
pending kernel side hardware enablement work and because we tried to
freeze core perf work a bit to give a time window for the fuzzing
efforts.
The diff is large mostly due to the JSON hardware event tables added
for Intel and Power8 CPUs. This was a popular feature request from
people working close to hardware and from the HPC community.
Tree size is big because this added the CPU event tables for over a
decade of Intel CPUs. Future changes for a CPU vendor alrady support
should be much smaller, as events for new models are added. The new
events are listed in 'perf list', for the CPU model the tool is
running on. If you find an interesting event it can be used as-is:
* The cachelines where false sharing was detected.
* The readers and writers to those cachelines, and the offsets where those accesses occurred.
* The pid, tid, instruction addr, function name, binary object name for those readers and writers.
* The source file and line number for each reader and writer.
* The average load latency for the loads to those cachelines.
* Which numa nodes the samples a cacheline came from and which CPUs were involved.
Using perf c2c is similar to using the Linux perf tool today.
First collect data with “perf c2c record”, then generate a
report output with “perf c2c report”
There one finds extensive details on using the tool, with tips on
reducing the volume of samples while still capturing enough to do
its job. (Dick Fowles, Joe Mario, Don Zickus, Jiri Olsa)
- The new 'perf sched timehist' tool provides tailored analysis of
scheduling events.
Example usage:
perf sched record -- sleep 1
perf sched timehist
By default it shows the individual schedule events, including the
wait time (time between sched-out and next sched-in events for the
task), the task scheduling delay (time between wakeup and actually
running) and run time for the task:
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
-------- ------ ---------------- --------- --------- --------
1.874569 [0011] gcc[31949] 0.014 0.000 1.148
1.874591 [0010] gcc[31951] 0.000 0.000 0.024
1.874603 [0010] migration/10[59] 3.350 0.004 0.011
1.874604 [0011] <idle> 1.148 0.000 0.035
1.874723 [0005] <idle> 0.016 0.000 1.383
1.874746 [0005] gcc[31949] 0.153 0.078 0.022
...
Times are in msec.usec. (David Ahern, Namhyung Kim)
- Add CPU vendor hardware event tables:
Add JSON files with vendor event naming for Intel and Power8
processors, allowing users of tools like oprofile to keep using the
event names they are used to, as well as people reading vendor
documentation, where such naming is used. (Andi Kleen, Sukadev
Bhattiprolu)
You should see all the new events with 'perf list' and you should
be able to search them, for example 'perf list miss' will list all
the myriads of miss events.
Other tooling features added were:
- Cross-arch annotation support:
o Improve ARM support in the annotation code, affecting 'perf
annotate', 'perf report' and live annotation in 'perf top' (Kim
Phillips)
o Initial support for PowerPC in the annotation code (Ravi
Bangoria)
o Support AArch64 in the 'annotate' code, native/local and
cross-arch/remote (Kim Phillips)
- Allow considering just events in a given time interval, via the
'--time start.s.ms,end.s.ms' command line, added to 'perf kmem',
'perf report', 'perf sched timehist' and 'perf script' (David
Ahern)
- Add option to stop printing a callchain at one of a given group of
symbol names (David Ahern)
- Track memory freed in 'perf kmem stat' (David Ahern)
- Allow querying and setting .perfconfig variables (Taeung Song)
- Show branch information in callchains (predicted, TSX aborts, loop
iteractions, etc) (Jin Yao)
- Dynamicly change verbosity level by pressing 'V' in the 'perf
top/report' hists TUI browser (Alexis Berlemont)
- Implement 'perf trace --delay' in the same fashion as in 'perf
record --delay', to skip sampling workload initialization events
(Alexis Berlemont)
- Make vendor named events case insensitive in 'perf list', i.e.
'perf list LONGEST_LAT' works just the same as 'perf list
longest_lat' (Andi Kleen)
- Add unwinding support for jitdump (Stefano Sanfilippo)
Tooling infrastructure changes:
- Support linking perf with clang and LLVM libraries, initially
statically, but this limitation will be lifted and shared
libraries, when available, will be preferred to the static build,
that should, as with other features, be enabled explicitly (Wang
Nan)
- Add initial support (and perf test entry) for tooling hooks,
starting with 'record_start' and 'record_end', that will have as
its initial user the eBPF infrastructure, where perf_ prefixed
functions will be JITed and run when such hooks are called (Wang
Nan)
... and lots of other changes, features, cleanups and refactorings I
did not list, see the shortlog and the git log for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (220 commits)
perf/x86: Fix exclusion of BTS and LBR for Goldmont
perf tools: Explicitly document that --children is enabled by default
perf sched timehist: Cleanup idle_max_cpu handling
perf sched timehist: Handle zero sample->tid properly
perf callchain: Introduce callchain_cursor__copy()
perf sched: Cleanup option processing
perf sched timehist: Improve error message when analyzing wrong file
perf tools: Move perf build related variables under non fixdep leg
perf tools: Force fixdep compilation at the start of the build
perf tools: Move PERF-VERSION-FILE target into rules area
perf build: Check LLVM version in feature check
perf annotate: Show raw form for jump instruction with indirect target
perf tools: Add non config targets
perf tools: Cleanup build directory before each test
perf tools: Move python/perf.so target into rules area
perf tools: Move install-gtk target into rules area
tools build: Move tabs to spaces where suitable
tools build: Make the .cmd file more readable
perf clang: Compile BPF script using builtin clang support
perf clang: Support compile IR to BPF object and add testcase
...
- Rework and generalize the mutex code to remove per arch mutex
primitives. (Peter Zijlstra)
- Add vCPU preemption support: add an interface to query the
preemption status of vCPUs and use it in locking primitives - this
optimizes paravirt performance. (Pan Xinhui, Juergen Gross,
Christian Borntraeger)
- Introduce cpu_relax_yield() and remov cpu_relax_lowlatency() to
clean up and improve the s390 lock yielding machinery and its core
kernel impact. (Christian Borntraeger)
- Micro-optimize mutexes some more. (Waiman Long)
- Reluctantly add the to-be-deprecated mutex_trylock_recursive()
interface on a temporary basis, to give the DRM code more time to
get rid of its locking hacks. Any other users will be NAK-ed on
sight. (We turned off the deprecation warning for the time being to
not pollute the build log.) (Peter Zijlstra)
- Improve the rtmutex code a bit, in light of recent long lived
bugs/races. (Thomas Gleixner)
- Misc fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/paravirt: Fix bool return type for PVOP_CALL()
x86/paravirt: Fix native_patch()
locking/ww_mutex: Use relaxed atomics
locking/rtmutex: Explain locking rules for rt_mutex_proxy_unlock()/init_proxy_locked()
locking/rtmutex: Get rid of RT_MUTEX_OWNER_MASKALL
x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted()
locking/mutex: Break out of expensive busy-loop on {mutex,rwsem}_spin_on_owner() when owner vCPU is preempted
locking/osq: Break out of spin-wait busy waiting loop for a preempted vCPU in osq_lock()
Documentation/virtual/kvm: Support the vCPU preemption check
x86/xen: Support the vCPU preemption check
x86/kvm: Support the vCPU preemption check
x86/kvm: Support the vCPU preemption check
kvm: Introduce kvm_write_guest_offset_cached()
locking/core, x86/paravirt: Implement vcpu_is_preempted(cpu) for KVM and Xen guests
locking/spinlocks, s390: Implement vcpu_is_preempted(cpu)
locking/core, powerpc: Implement vcpu_is_preempted(cpu)
sched/core: Introduce the vcpu_is_preempted(cpu) interface
sched/wake_q: Rename WAKE_Q to DEFINE_WAKE_Q
locking/core: Provide common cpu_relax_yield() definition
locking/mutex: Don't mark mutex_trylock_recursive() as deprecated, temporarily
...
Linus Torvalds [Mon, 12 Dec 2016 18:03:44 +0000 (10:03 -0800)]
Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The main changes in this development cycle were:
- Implement EFI dev path parser and other changes to fully support
thunderbolt devices on Apple Macbooks (Lukas Wunner)
- Add RNG seeding via the EFI stub, on ARM/arm64 (Ard Biesheuvel)
- Expose EFI framebuffer configuration to user-space, to improve
tooling (Peter Jones)
- Misc fixes and cleanups (Ivan Hu, Wei Yongjun, Yisheng Xie, Dan
Carpenter, Roy Franz)"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Make efi_random_alloc() allocate below 4 GB on 32-bit
thunderbolt: Compile on x86 only
thunderbolt, efi: Fix Kconfig dependencies harder
thunderbolt, efi: Fix Kconfig dependencies
thunderbolt: Use Device ROM retrieved from EFI
x86/efi: Retrieve and assign Apple device properties
efi: Allow bitness-agnostic protocol calls
efi: Add device path parser
efi/arm*/libstub: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table
efi/libstub: Add random.c to ARM build
efi: Add support for seeding the RNG from a UEFI config table
MAINTAINERS: Add ARM and arm64 EFI specific files to EFI subsystem
efi/libstub: Fix allocation size calculations
efi/efivar_ssdt_load: Don't return success on allocation failure
efifb: Show framebuffer layout as device attributes
efi/efi_test: Use memdup_user() as a cleanup
efi/efi_test: Fix uninitialized variable 'rv'
efi/efi_test: Fix uninitialized variable 'datasize'
efi/arm*: Fix efi_init() error handling
efi: Remove unused include of <linux/version.h>
Linus Torvalds [Mon, 12 Dec 2016 18:02:01 +0000 (10:02 -0800)]
Merge branch 'core-smp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP bootup updates from Ingo Molnar:
"Three changes to unify/standardize some of the bootup message printing
in kernel/smp.c between architectures"
* 'core-smp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/smp: Tell the user we're bringing up secondary CPUs
kernel/smp: Make the SMP boot message common on all arches
kernel/smp: Define pr_fmt() for smp.c
Linus Torvalds [Mon, 12 Dec 2016 17:09:54 +0000 (09:09 -0800)]
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this development cycle were:
- Miscellaneous fixes, including a change to call_rcu()'s rcu_head
alignment check.
- Security-motivated list consistency checks, which are disabled by
default behind DEBUG_LIST.
- Torture-test updates.
- Documentation updates, yet again just simple changes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
torture: Prevent jitter from delaying build-only runs
torture: Remove obsolete files from rcutorture .gitignore
rcu: Don't kick unless grace period or request
rcu: Make expedited grace periods recheck dyntick idle state
torture: Trace long read-side delays
rcu: RCU_TRACE enables event tracing as well as debugfs
rcu: Remove obsolete comment from __call_rcu()
rcu: Remove obsolete rcu_check_callbacks() header comment
rcu: Tighten up __call_rcu() rcu_head alignment check
Documentation/RCU: Fix minor typo
documentation: Present updated RCU guarantee
bug: Avoid Kconfig warning for BUG_ON_DATA_CORRUPTION
lib/Kconfig.debug: Fix typo in select statement
lkdtm: Add tests for struct list corruption
bug: Provide toggle for BUG on data corruption
list: Split list_del() debug checking into separate function
rculist: Consolidate DEBUG_LIST for list_add_rcu()
list: Split list_add() debug checking into separate function
Linus Torvalds [Mon, 12 Dec 2016 17:06:38 +0000 (09:06 -0800)]
Merge tag 'cris-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
Pull CRIS updates from Jesper Nilsson:
"Three patches for minor issues"
* tag 'cris-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
cris: No need to append -O2 and $(LINUXINCLUDE)
tty: serial: make crisv10 explicitly non-modular
cris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected
Linus Torvalds [Mon, 12 Dec 2016 16:51:37 +0000 (08:51 -0800)]
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull Openrisc updates from Stafford Horne:
- changes to MAINTAINER for openrisc
- probably biggest actual change is the move to memblock from bootmem
- ... plus several bug and build fixes
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
openrisc: prevent VGA console, fix builds
openrisc: include l.swa in check for write data pagefault
openrisc: Updates after openrisc.net has been lost
openrisc: Consolidate setup to use memblock instead of bootmem
openrisc: remove the redundant of_platform_populate
openrisc: add NR_CPUS Kconfig default value
openrisc: Support both old (or32) and new (or1k) toolchain
openrisc: Add thread-local storage (TLS) support
openrisc: restore all regs on rt_sigreturn
openrisc: fix PTRS_PER_PGD define
Linus Torvalds [Mon, 12 Dec 2016 16:48:28 +0000 (08:48 -0800)]
Merge tag 'm68k-for-v4.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
"Use seq_puts() for fixed strings"
* tag 'm68k-for-v4.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/atari: Use seq_puts() in atari_get_hardware_list()
m68k/amiga: Use seq_puts() in amiga_get_hardware_list()
Linus Torvalds [Mon, 12 Dec 2016 16:46:34 +0000 (08:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 updates from Hans-Christian Noren Egtvedt.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
avr32: wire up pkey syscalls
AVR32-pio: Replace two seq_printf() calls by seq_puts() in pio_bank_show()
AVR32-pio: Use seq_putc() in pio_bank_show()
AVR32-clock: Combine nine seq_printf() calls into one call in clk_show()
AVR32-clock: Use seq_putc() in two functions
Linus Torvalds [Mon, 12 Dec 2016 16:44:23 +0000 (08:44 -0800)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"There are two sets of changes in this pull.
The largest is the addition of the ColdFire platform side i2c support
(the IO addressing, setup and clock definitions). The i2c hardware
module itself is driven by the kernels existing iMX i2c driver.
The other change is the addition of support for the Amcore board"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: AMCORE board, add iMX i2c support
m68k: add Sysam AMCORE open board support
m68knommu: platform support for i2c devices on ColdFire SoC
Pull sparc updates from David Miller:
"Just a bunch of small cleanups and fixes here, and support for user
probes from Allen Pais"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: fix a building error reported by kbuild
sparc64: fix typo in pgd_clear()
sparc64: restore irq in error paths in iommu
sparc: leon: Fix a retry loop in leon_init_timers()
sparc64: make string buffers large enough
sparc64: move dereference after check for NULL
sparc: kernel: use builtin_platform_driver
sparc64:Support User Probes for sparc
1) Platform regulatory domain support for ath10k, from Bartosz
Markowski.
2) Centralize min/max MTU checking, thus removing tons of duplicated
code all of the the various drivers. From Jarod Wilson.
3) Support ingress actions in act_mirred, from Shmulik Ladkani.
4) Improve device adjacency tracking, from David Ahern.
5) Add support for LED triggers on PHY link state changes, from Zach
Brown.
6) Improve UDP socket memory accounting, from Paolo Abeni.
7) Set SK_MEM_QUANTUM to a fixed size of 4096, instead of PAGE_SIZE.
From Eric Dumazet.
8) Collapse TCP SKBs at retransmit time even if the right side SKB has
frags. Also from Eric Dumazet.
9) Add IP_RECVFRAGSIZE and IPV6_RECVFRAGSIZE cmsgs, from Willem de
Bruijn.
10) Support routing by UID, from Lorenzo Colitti.
11) Handle L3 domain binding (ie. VRF) for RAW sockets, from David
Ahern.
12) tcp_get_info() can run lockless, from Eric Dumazet.
13) 4-tuple UDP hashing in SFC driver, from Edward Cree.
14) Avoid reorders in GRO code, from Eric Dumazet.
15) IPV6 Segment Routing support, from David Lebrun.
16) Support MPLS push and pop for L3 packets in openvswitch, from Jiri
Benc.
17) Add LRU datastructure support for BPF, Martin KaFai Lau.
18) VF support in liquidio driver, from Raghu Vatsavayi.
19) Multiqueue support in alx driver, from Tobias Regnery.
20) Networking cgroup BPF support, from Daniel Mack.
21) TCP chronograph measurements, from Francis Yan.
22) XDP support for qed driver, from Yuval Mintz.
23) BPF based lwtunnels, from Thomas Graf.
24) Consistent FIB dumping to offloading drivers, from Ido Schimmel.
25) Many optimizations for UDP under high load, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
netfilter: nft_counter: rework atomic dump and reset
e1000: use disable_hardirq() for e1000_netpoll()
i40e: don't truncate match_method assignment
net: ethernet: ti: netcp: add support of cpts
net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause
net: l2tp: ppp: change PPPOL2TP_MSG_* => L2TP_MSG_*
net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*
net: l2tp: export debug flags to UAPI
net: ethernet: stmmac: remove private tx queue lock
net: ethernet: sxgbe: remove private tx queue lock
net: bridge: shorten ageing time on topology change
net: bridge: add helper to set topology change
net: bridge: add helper to offload ageing time
net: nicvf: use new api ethtool_{get|set}_link_ksettings
net: ethernet: ti: cpsw: sync rates for channels in dual emac mode
net: ethernet: ti: cpsw: re-split res only when speed is changed
net: ethernet: ti: cpsw: combine budget and weight split and check
net: ethernet: ti: cpsw: don't start queue twice
net: ethernet: ti: cpsw: use same macros to get active slave
net: mvneta: select GENERIC_ALLOCATOR
...
Randy Dunlap [Sun, 20 Nov 2016 23:40:32 +0000 (08:40 +0900)]
openrisc: prevent VGA console, fix builds
OpenRISC does not support VGA console, so prevent that kconfig symbol
from being enabled for OpenRISC, thus fixing these build errors:
drivers/built-in.o: In function `vgacon_save_screen':
vgacon.c:(.text+0x20e0): undefined reference to `screen_info'
vgacon.c:(.text+0x20e8): undefined reference to `screen_info'
drivers/built-in.o: In function `vgacon_init':
vgacon.c:(.text+0x284c): undefined reference to `screen_info'
vgacon.c:(.text+0x2850): undefined reference to `screen_info'
drivers/built-in.o: In function `vgacon_startup':
vgacon.c:(.text+0x28d8): undefined reference to `screen_info'
drivers/built-in.o:vgacon.c:(.text+0x28f0): more undefined references to `screen_info' follow
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Chen Gang <gang.chen@asianux.com> Cc: Jonas Bonn <jonas@southpole.se> Signed-off-by: Stafford Horne <shorne@gmail.com>
openrisc: include l.swa in check for write data pagefault
During page fault handling we check the last instruction to understand
if the fault was for a read or for a write. By default we fall back to
read. New instructions were added to the openrisc 1.1 spec for an
atomic load/store pair (l.lwa/l.swa).
This patch adds the opcode for l.swa (0x33) allowing it to be treated as
a write operation.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
[shorne@gmail.com: expanded a bit on the comment] Signed-off-by: Stafford Horne <shorne@gmail.com>
Stafford Horne [Mon, 21 Mar 2016 08:11:10 +0000 (17:11 +0900)]
openrisc: Updates after openrisc.net has been lost
The openrisc.net domain expired and was taken over by squatters.
These updates point documentation to the new domain, mailing lists
and git repos.
Also, Jonas is not the main maintainer anylonger, he reviews changes
but does not maintain a repo or sent pull requests. Updating this to
add Stafford and Stefan who are the active maintainers.
Rob Herring [Tue, 30 Aug 2016 15:10:59 +0000 (00:10 +0900)]
openrisc: remove the redundant of_platform_populate
The of_platform_populate call in the openrisc arch code is now redundant
as the DT core provides a default call. Openrisc has a NULL match table
which means only top level nodes with compatible strings will have
devices creates. The default version will also descend nodes in the
match table such as "simple-bus" which should be fine as openrisc
doesn't have any of these (though it is preferred that memory-mapped
peripherals be grouped under a bus node(s)).
Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jonas Bonn <jonas@southpole.se> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
openrisc: Support both old (or32) and new (or1k) toolchain
The output file format for or1k has changed from "elf32-or32"
to "elf32-or1k". Select the correct output format automatically
to be able to compile the kernel with both toolchain variants.
Jonas Bonn [Mon, 23 Sep 2013 10:04:20 +0000 (12:04 +0200)]
openrisc: restore all regs on rt_sigreturn
Fix signal handling for when signals are handled as the result of timers
or exceptions, previous code assumed syscalls. This was noticeable with X
crashing where it uses SIGALRM.
This patch restores all regs before returning to userspace via
_resume_userspace instead of via syscall return path.
The rt_sigreturn syscall is more like a context switch than a function
call; it entails a return from one context (the signal handler) to another
(the process in question). For a context switch like this there are
effectively no call-saved regs that remain constant across the transition.
Reported-by: Sebastian Macke <sebastian@macke.de> Signed-off-by: Jonas Bonn <jonas@southpole.se> Tested-by: Guenter Roeck <linux@roeck-us.net>
[shorne@gmail.com: Updated comment better reflect change and issue] Signed-off-by: Stafford Horne <shorne@gmail.com>
On OpenRISC, with its 8k pages, PAGE_SHIFT is defined to be 13.
That makes the expression (1UL << (PAGE_SHIFT-2)) evaluate
to 2048.
The correct value for PTRS_PER_PGD should be 256.
Correcting the PTRS_PER_PGD define unveiled a bug in map_ram(),
where PTRS_PER_PGD was used when the intent was to iterate
over a set of page table entries.
This patch corrects that issue as well.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Acked-by: Jonas Bonn <jonas@southpole.se> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
>> arch/sparc/include/asm/topology_64.h:44:44:
error: implicit declaration of function 'cpu_data'
[-Werror=implicit-function-declaration]
#define topology_physical_package_id(cpu) (cpu_data(cpu).proc_id)
^
Let's include cpudata.h in topology_64.h.
Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 25 Nov 2016 21:15:37 +0000 (00:15 +0300)]
sparc64: restore irq in error paths in iommu
There are some error paths where we should restore IRQs but we don't.
Fixes: bb620c3d3925 ("sparc: Make sparc64 use scalable lib/iommu-common.c functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 25 Nov 2016 11:25:54 +0000 (14:25 +0300)]
sparc: leon: Fix a retry loop in leon_init_timers()
The original code causes a static checker warning because it has a
continue inside a do { } while (0); loop. In that context, a continue
and a break are equivalent. The intent was to go back to the start of
the loop so the continue was a bug.
I've added a retry label at the start and changed the continue to a goto
retry. Then I removed the do { } while (0) loop and pulled the code in
one indent level.
Fixes: 2791c1a43900 ("SPARC/LEON: added support for selecting Timer Core and Timer within core") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 25 Nov 2016 11:03:55 +0000 (14:03 +0300)]
sparc64: make string buffers large enough
My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit)
then some of the strings will overflow. I don't know if that's possible
but it seems simple enough to make the buffers slightly larger.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 25 Nov 2016 11:01:32 +0000 (14:01 +0300)]
sparc64: move dereference after check for NULL
We shouldn't dereference "iommu" until after we have checked that it is
non-NULL.
Fixes: f08978b0fdbf ("sparc64: Enable sun4v dma ops to use IOMMU v2 APIs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allen Pais [Thu, 13 Oct 2016 04:36:13 +0000 (10:06 +0530)]
sparc64:Support User Probes for sparc
Signed-off-by: Eric Saint Etienne <eric.saint.etienne@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 11 Dec 2016 18:17:39 +0000 (10:17 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Two more MIPS fixes for 4.9:
- RTC: Return -ENODEV so an external RTC will be tried
- Fix mask of GPE frequency
These two have been tested on Imagination's automated test system and
also both received positive reviews on the linux-mips mailing list"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Lantiq: Fix mask of GPE frequency
MIPS: Return -ENODEV from weak implementation of rtc_mips_set_time
Pablo Neira [Sun, 11 Dec 2016 10:43:59 +0000 (11:43 +0100)]
netfilter: nft_counter: rework atomic dump and reset
Dump and reset doesn't work unless cmpxchg64() is used both from packet
and control plane paths. This approach is going to be slow though.
Instead, use a percpu seqcount to fetch counters consistently, then
subtract bytes and packets in case a reset was requested.
The cpu that running over the reset code is guaranteed to own this stats
exclusively, we have to turn counters into signed 64bit though so stats
update on reset don't get wrong on underflow.
This patch is based on original sketch from Eric Dumazet.
Fixes: 43da04a593d8 ("netfilter: nf_tables: atomic dump and reset for stateful objects") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Guittot [Thu, 8 Dec 2016 16:56:54 +0000 (17:56 +0100)]
sched/core: Use load_avg for selecting idlest group
find_idlest_group() only compares the runnable_load_avg when looking
for the least loaded group. But on fork intensive use case like
hackbench where tasks blocked quickly after the fork, this can lead to
selecting the same CPU instead of other CPUs, which have similar
runnable load but a lower load_avg.
When the runnable_load_avg of 2 CPUs are close, we now take into
account the amount of blocked load as a 2nd selection factor. There is
now 3 zones for the runnable_load of the rq:
- [0 .. (runnable_load - imbalance)]:
Select the new rq which has significantly less runnable_load
- [(runnable_load - imbalance) .. (runnable_load + imbalance)]:
The runnable loads are close so we use load_avg to chose
between the 2 rq
- [(runnable_load + imbalance) .. ULONG_MAX]:
Keep the current rq which has significantly less runnable_load
The scale factor that is currently used for comparing runnable_load,
doesn't work well with small value. As an example, the use of a
scaling factor fails as soon as this_runnable_load == 0 because we
always select local rq even if min_runnable_load is only 1, which
doesn't really make sense because they are just the same. So instead
of scaling factor, we use an absolute margin for runnable_load to
detect CPUs with similar runnable_load and we keep using scaling
factor for blocked load.
For use case like hackbench, this enable the scheduler to select
different CPUs during the fork sequence and to spread tasks across the
system.
Tests have been done on a Hikey board (ARM based octo cores) for
several kernel. The result below gives min, max, avg and stdev values
of 18 runs with each configuration.
The patches depend on the "no missing update_rq_clock()" work.
Vincent Guittot [Thu, 8 Dec 2016 16:56:53 +0000 (17:56 +0100)]
sched/core: Fix find_idlest_group() for fork
During fork, the utilization of a task is init once the rq has been
selected because the current utilization level of the rq is used to
set the utilization of the fork task. As the task's utilization is
still 0 at this step of the fork sequence, it doesn't make sense to
look for some spare capacity that can fit the task's utilization.
Furthermore, I can see perf regressions for the test:
hackbench -P -g 1
because the least loaded policy is always bypassed and tasks are not
spread during fork.
With this patch and the fix below, we are back to same performances as
for v4.8. The fix below is only a temporary one used for the test
until a smarter solution is found because we can't simply remove the
test which is useful for others benchmarks
| @@ -5708,13 +5708,6 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t
|
| avg_cost = this_sd->avg_scan_cost;
|
| - /*
| - * Due to large variance we need a large fuzz factor; hackbench in
| - * particularly is sensitive here.
| - */
| - if ((avg_idle / 512) < avg_cost)
| - return -1;
| -
| time = local_clock();
|
| for_each_cpu_wrap(cpu, sched_domain_span(sd), target, wrap) {
Tested-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: kernellwp@gmail.com Cc: umgwanakikbuti@gmail.com Cc: yuyang.du@intel.comc Link: http://lkml.kernel.org/r/1481216215-24651-2-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
introduced a paravirt op with bool return type [*]
It turns out that the PVOP_CALL*() macros miscompile when rettype is
bool. Code that looked like:
83 ef 01 sub $0x1,%edi
ff 15 32 a0 d8 00 callq *0xd8a032(%rip) # ffffffff81e28120 <pv_lock_ops+0x20>
84 c0 test %al,%al
ended up looking like so after PVOP_CALL1() was applied:
83 ef 01 sub $0x1,%edi
48 63 ff movslq %edi,%rdi
ff 14 25 20 81 e2 81 callq *0xffffffff81e28120
48 85 c0 test %rax,%rax
Note how it tests the whole of %rax, even though a typical bool return
function only sets %al, like:
0f 95 c0 setne %al
c3 retq
This is because ____PVOP_CALL() does:
__ret = (rettype)__eax;
and while regular integer type casts truncate the result, a cast to
bool tests for any !0 value. Fix this by explicitly truncating to
sizeof(rettype) before casting.
[*] The actual bug should've been exposed in commit: 446f3dc8cc0a ("locking/core, x86/paravirt: Implement vcpu_is_preempted(cpu) for KVM and Xen guests")
but that didn't properly implement the paravirt call.
Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alok Kataria <akataria@vmware.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 3cded4179481 ("x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted()") Link: http://lkml.kernel.org/r/20161208154349.346057680@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Fri, 9 Dec 2016 00:14:17 +0000 (16:14 -0800)]
perf/x86: Fix exclusion of BTS and LBR for Goldmont
An earlier patch allowed enabling PT and LBR at the same
time on Goldmont. However it also allowed enabling BTS and LBR
at the same time, which is still not supported. Fix this by
bypassing the check only for PT.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: alexander.shishkin@intel.com Cc: kan.liang@intel.com Cc: <stable@vger.kernel.org> Fixes: ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it") Link: http://lkml.kernel.org/r/20161209001417.4713-1-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luuk Paulussen [Wed, 7 Dec 2016 22:43:34 +0000 (11:43 +1300)]
MIPS: Return -ENODEV from weak implementation of rtc_mips_set_time
The sync_cmos_clock function in kernel/time/ntp.c first tries to update
the internal clock of the cpu by calling the "update_persistent_clock64"
architecture specific function. If this returns -ENODEV, it then tries
to update an external RTC using "rtc_set_ntp_time".
On the mips architecture, the weak implementation of the underlying
function would return 0 if it wasn't overridden. This meant that the
sync_cmos_clock function would never try to update an external RTC
(if both CONFIG_GENERIC_CMOS_UPDATE and CONFIG_RTC_SYSTOHC are
configured)
Returning -ENODEV instead, means that an external RTC will be tried.
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Reviewed-by: Scott Parlane <scott.parlane@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14649/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
WANG Cong [Sat, 10 Dec 2016 22:22:42 +0000 (14:22 -0800)]
e1000: use disable_hardirq() for e1000_netpoll()
In commit 02cea3958664 ("genirq: Provide disable_hardirq()")
Peter introduced disable_hardirq() for netpoll, but it is forgotten
to use it for e1000.
This patch changes disable_irq() to disable_hardirq() for e1000.
Reported-by: Dave Jones <davej@codemonkey.org.uk> Suggested-by: Sabrina Dubroca <sd@queasysnail.net> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Keller, Jacob E [Fri, 9 Dec 2016 21:39:21 +0000 (13:39 -0800)]
i40e: don't truncate match_method assignment
The .match_method field is a u8, so we shouldn't be casting to a u16,
and because it is only one byte, we do not need to byte swap anything.
Just assign the value directly. This avoids issues on Big Endian
architectures which would have byte swapped and then incorrectly
truncated the value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bimmy Pujari <bimmy.pujari@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WingMan Kwok [Thu, 8 Dec 2016 22:21:56 +0000 (16:21 -0600)]
net: ethernet: ti: netcp: add support of cpts
This patch adds support of the cpts device found in the
gbe and 10gbe ethernet switches on the keystone 2 SoCs
(66AK2E/L/Hx, 66AK2Gx).
Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Wed, 7 Dec 2016 19:20:51 +0000 (13:20 -0600)]
net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause
Instead of having individual PHY drivers set the SUPPORTED_Pause and
SUPPORTED_Asym_Pause flags, phylib itself should set those flags,
unless there is a hardware erratum or other special case. During
autonegotiation, the PHYs will determine whether to enable pause
frame support.
Pause frames are a feature that is supported by the MAC. It is the MAC
that generates the frames and that processes them. The PHY can only be
configured to allow them to pass through.
This commit also effectively reverts the recently applied c7a61319
("net: phy: dp83848: Support ethernet pause frames").
So the new process is:
1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause
and SUPPORTED_AsymPause bits in phydev->supported. This indicates that
the PHY supports pause frames.
2) The MAC driver checks phydev->supported before it calls phy_start().
If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver
sets those bits in phydev->advertising, if it wants to enable pause
frame support.
3) When the link state changes, the MAC driver checks phydev->pause and
phydev->asym_pause, If the bits are set, then it enables the corresponding
features in the MAC. The algorithm is:
if (phydev->pause)
The MAC should be programmed to receive and honor
pause frames it receives, i.e. enable receive flow control.
if (phydev->pause != phydev->asym_pause)
The MAC should be programmed to transmit pause
frames when needed, i.e. enable transmit flow control.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*
PPPOL2TP_MSG_* and L2TP_MSG_* are duplicates, and are being used
interchangeably in the kernel, so let's standardize on L2TP_MSG_*
internally, and keep PPPOL2TP_MSG_* defined in UAPI for compatibility.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver uses a private lock for synchronization of the xmit function and
the xmit completion handler, but since the NETIF_F_LLTX flag is not set,
the xmit function is also called with the xmit_lock held.
On the other hand the completion handler uses the reverse locking order by
first taking the private lock and (in case that the tx queue had been
stopped) then the xmit_lock.
Improve the locking by removing the private lock and using only the
xmit_lock for synchronization instead.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver uses a private lock for synchronization of the xmit function and
the xmit completion handler, but since the NETIF_F_LLTX flag is not set,
the xmit function is also called with the xmit_lock held.
On the other hand the completion handler uses the reverse locking order by
first taking the private lock and (in case that the tx queue had been
stopped) then the xmit_lock.
Improve the locking by removing the private lock and using only the
xmit_lock for synchronization instead.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: bridge: fast ageing on topology change
802.1D [1] specifies that the bridges in a network must use a short
value to age out dynamic entries in the Filtering Database for a period,
once a topology change has been communicated by the root bridge.
This patchset fixes this for the in-kernel STP implementation.
Once the topology change flag is set in a net_bridge instance, the
ageing time value is shorten to twice the forward delay used by the
topology.
When the topology change flag is cleared, the ageing time configured for
the bridge is restored.
To accomplish that, a new bridge_ageing_time member is added to the
net_bridge structure, to store the user configured bridge ageing time.
Two helpers are added to offload the ageing time and set the topology
change flag in the net_bridge instance. Then the required logic is added
in the topology change helper if in-kernel STP is used.
When unplugging/replugging the laptop, the slave bridge (under test)
gets the topology change flag sent by the root bridge, and fast ageing
is triggered on the bridges. Once the topology change timer of the root
bridge expires, the topology change flag is cleared and the configured
ageing time is restored on the bridges.
A similar test has been done between two bridges under test.
When changing the forward delay of the root bridge with:
Vivien Didelot [Sat, 10 Dec 2016 18:44:29 +0000 (13:44 -0500)]
net: bridge: shorten ageing time on topology change
802.1D [1] specifies that the bridges must use a short value to age out
dynamic entries in the Filtering Database for a period, once a topology
change has been communicated by the root bridge.
Add a bridge_ageing_time member in the net_bridge structure to store the
bridge ageing time value configured by the user (ioctl/netlink/sysfs).
If we are using in-kernel STP, shorten the ageing time value to twice
the forward delay used by the topology when the topology change flag is
set. When the flag is cleared, restore the configured ageing time.
Vivien Didelot [Sat, 10 Dec 2016 18:44:27 +0000 (13:44 -0500)]
net: bridge: add helper to offload ageing time
The SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME switchdev attr is actually set
when initializing a bridge port, and when configuring the bridge ageing
time from ioctl/netlink/sysfs.
Add a __set_ageing_time helper to offload the ageing time to physical
switches, and add the SWITCHDEV_F_DEFER flag since it can be called
under bridge lock.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Sat, 10 Dec 2016 12:23:49 +0000 (14:23 +0200)]
net: ethernet: ti: cpsw: re-split res only when speed is changed
Don't re-split res in the following cases:
- speed of phys is not changed
- speed of phys is changed and no rate limited channels
- speed of phys is changed and all channels are rate limited
- phy is unlinked while dev is open
- phy is linked back but speed is not changed
The maximum speed is sum of "linked" phys, thus res are split taken
in account two interfaces, both for dual emac mode and for
switch mode.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Sat, 10 Dec 2016 12:23:48 +0000 (14:23 +0200)]
net: ethernet: ti: cpsw: combine budget and weight split and check
Re-split weight along with budget. It simplify code a little
and update state after every rate change. Also it's necessarily
to move arguments checks to this combined function. Replace
maximum rate check for an interface on maximum possible rate.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Sat, 10 Dec 2016 10:38:32 +0000 (11:38 +0100)]
net: mvneta: select GENERIC_ALLOCATOR
We previously relied on GENERIC_ALLOCATOR to be selected by CONFIG_ARM,
but now we can compile-test the driver on other architectures that
don't select it:
drivers/net/built-in.o: In function `mvneta_bm_remove':
mvneta_bm.c:(.text+0x4ee35): undefined reference to `gen_pool_free'
This adds an explicit select for the part of the driver that has
the dependency.
Fixes: a0627f776a45 ("net: marvell: Allow drivers to be built with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / karo-tx-linux.git / log