Antti Palosaari [Mon, 25 Aug 2014 01:54:06 +0000 (22:54 -0300)]
[media] msi2500: logging changes
Kernel logging system needs pointer to usb interface device in
order to print names and bus numbers properly. There was wrong
device pointer given and log printings wasn't correct.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Sample rate calculation gives a little bit too large results because
in real life there was around one milliseconds (~one usb packet) too
much data for given time. Calculate time more accurate in order to
provide better results.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Antti Palosaari [Sun, 24 Aug 2014 22:14:32 +0000 (19:14 -0300)]
[media] airspy: logging changes
Kernel logging system needs pointer to usb interface device in
order to print names and bus numbers properly. There was wrong
device pointer given and log printings wasn't correct.
Remove some debug logging from v4l2 ioctl functions. v4l2 core debug
prints almost same information when enabled.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Merge tag 'media-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"some media bug fixes:
- a Kconfig dependency issue
- some fixes for af9033/it913x demod to be more reliable and address
a performance regression
- cx18: fix an oops on devices with tda8290 tuner
- two new USB IDs for af9035
- a couple fixes on smapp driver"
* tag 'media-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] af9035: new IDs: add support for PCTV 78e and PCTV 79e
[media] af9033: feed clock to RF tuner
[media] it913x: init tuner on attach
[media] af9033: update IT9135 tuner inittabs
[media] Kconfig: do not select SPI bus on sub-driver auto-select
[media] cx18: fix kernel oops with tda8290 tuner
[media] smiapp: Set sub-device owner
[media] smiapp: Fix power count handling
Merge tag 'staging-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO fixes from Greg KH:
"Here are some IIO and Staging driver fixes for 3.17-rc6. They are all
pretty simple, and resolve reported issues"
* tag 'staging-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt6655: buffer overflow in ioctl
iio:magnetometer: bugfix magnetometers gain values
iio: adc: at91: don't use the last converted data register
iio: adc: xilinx-xadc: assign auxiliary channels address correctly
iio: meter: ade7758: Fix indio_dev->trig assignment
iio: inv_mpu6050: Fix indio_dev->trig assignment
iio: gyro: itg3200: Fix indio_dev->trig assignment
iio: st_sensors: Fix indio_dev->trig assignment
iio: hid_sensor_hub: Fix indio_dev->trig assignment
iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment
iio: accel: bma180: Fix indio_dev->trig assignment
iio:trigger: modify return value for iio_trigger_get
iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name
Merge tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes / quirks from Greg KH:
"Here are some USB and PHY fixes and quirks for 3.17-rc6. Nothing
major, just a few things that have been reported"
* tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
USB: EHCI: unlink QHs even after the controller has stopped
phy: spear1340-miphy: fix driver dependencies
phy: spear1310-miphy: fix driver dependencies
phy: miphy365x: Fix off-by-one error
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target pending fixes for v3.17-rc6.
Included are Sagi's long overdue fixes related to iser-target
shutdown, along with a couple of fixes from Sebastian related to ALUA
Referrals changes that when in during the v3.14 time-frame.
Also included are a few iscsi-target fixes, most recently of which
where found during Joern's Coverity scanning of target code"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid
target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE
target: Fix user data segment multiplier in spc_emulate_evpd_b3()
iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup
Target/iser: Fix initiator_depth and responder_resources
Target/iser: Avoid calling rdma_disconnect twice
Target/iser: Don't put isert_conn inside disconnected handler
Target/iser: Get isert_conn reference once got to connected_handler
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of radeon fixes for oops on module unload, and problems with
resetting the dma engine, one nouveau fix for black boxes in rendering
on my mbp retina, one sti fix, and a couple of intel fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
drm/bochs: add missing drm_connector_register call
drm/cirrus: add missing drm_connector_register call
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
drm/nouveau/runpm: fix module unload
drm/radeon/px: fix module unload
vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
drm/radeon: don't reset dma on r6xx-evergreen init
drm/radeon: don't reset sdma on CIK init
drm/radeon: don't reset dma on NI/SI init
drm/radeon/dpm: fix resume on mullins
drm/radeon: Disable HDP flush before every CS again for < r600
drm/radeon: delete unused PTE_* defines
drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv
drm: sti: do not iterate over the info frame array
drm/i915: Fix SRC_COPY width on 830/845g
Ben Skeggs [Sat, 20 Sep 2014 07:39:00 +0000 (17:39 +1000)]
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
A mismatch between FB and LTC's idea of how big a large page is causes
issues such as black "holes" in rendering to occur on some boards
(those where LTC is configured for 64KiB large pages) when compression
is used.
Confirmed to fix at least the GK107 MBP.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sat, 20 Sep 2014 07:23:37 +0000 (17:23 +1000)]
Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
single fix for regression on rs4xx/rs690/rs740
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
Merge tag 'iio-fixes-3.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First round of IIO fixes for the 3.17 cycle.
* Fix an overwritten error return that can prevent deferred probing when
using of_iio_channel_get_by_name
* A series that deals with an incorrect reference count when the default
trigger is set within the main probe routine for a driver. Can result
in a double free if the trigger is changed.
* Fix a buglet with xilinx-xadc concerning setup of the address for an
aux channel.
* At91 adc driver could sometimes get a touchscreen reading rather than
the intended adc channel. This is fixed by using the channel data register
instead.
* Fix some ST magnetometer gain values that differ in production parts from
the prerelease ones used for driver development.
Mark [Wed, 17 Sep 2014 18:15:43 +0000 (19:15 +0100)]
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB-
SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The
US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI
chain to be accessed. Without it only the (single) device with SCSI ID 0
can be used.
The standalone converter sold by Entrega had model number U1-SC25. Xircom
acquired Entrega and re-branded the product line PortGear. The PortGear USB
to SCSI Converter (model PGSCSI) is internally identical to the Entrega
product, but later models may use a different USB ID. The Entrega-branded
units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and
Macintosh drivers also support 085A:0028.
Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac
(8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as
a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may
have initially used the same ID as the standalone U1-SC25 (1645:0007), but
later production used 085A:0026.
My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133
probably also exist.
This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows
driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I
couldn't find any mention of that actually existing in the wild; perhaps it
was cancelled before release?
Mark [Tue, 16 Sep 2014 15:51:41 +0000 (16:51 +0100)]
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
Hi,
The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g.
iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM
Microsystems chips. Only the connectors differ; both have the same USB ID.
The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other
than 0.
I don't have one of these, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the products use.
Mark [Tue, 16 Sep 2014 15:22:50 +0000 (16:22 +0100)]
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
The Adaptec USBConnect 2000 is another SCSI-USB converter which uses
Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is
required to use SCSI devices with ID other than 0.
I don't have a USBConnect 2000, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the product uses.
Alan Stern [Wed, 17 Sep 2014 15:23:54 +0000 (11:23 -0400)]
USB: EHCI: unlink QHs even after the controller has stopped
Old code in ehci-hcd tries to expedite disabling endpoints after the
controller has stopped, by destroying the endpoint's associated QH
without first unlinking the QH. This was necessary back when the
driver wasn't so careful about keeping track of the controller's
state.
But now we are careful about it, and the driver knows that when the
controller isn't running, no unlinking delay is needed. Furthermore,
skipping the unlink step will trigger a BUG() in qh_destroy() when the
preceding QH is released, because the link pointer will be non-NULL.
Removing the lines that skip the unlinking step and go directly to
QH_STATE_IDLE fixes the problem.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"I've got a revert to fix a regression with btrfs device registration,
and Filipe has part two of his fsync fix from last week"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "Btrfs: device_list_add() should not update list when mounted"
Btrfs: set inode's logged_trans/last_log_commit after ranged fsync
Merge tag 'nfs-for-3.17-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highligts:
- fix an Oops in nfs4_open_and_get_state
- fix an Oops in the nfs4_state_manager
- fix another bug in the close/open_downgrade code"
* tag 'nfs-for-3.17-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix another bug in the close/open_downgrade code
NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()
NFS: remove BUG possibility in nfs4_open_and_get_state
Merge tag 'pci-v3.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These fix:
- Boot video device detection on dual-GPU Apple systems
- Hotplug fiascos on VGA switcheroo with radeon & nouveau drivers
- Boot hang on Freescale i.MX6 systems
- Excessive "no hotplug settings from platform" warnings
In particular:
Enumeration
- Don't default exclusively to first video device (Bruno Prémont)
PCI device hotplug
- Remove "no hotplug settings from platform" warning (Bjorn Helgaas)
- Add pci_ignore_hotplug() for VGA switcheroo (Bjorn Helgaas)
Freescale i.MX6
- Put LTSSM in "Detect" state before disabling (Lucas Stach)"
* tag 'pci-v3.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
vgaarb: Drop obsolete #ifndef
vgaarb: Don't default exclusively to first video device with mem+io
ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()
PCI: Remove "no hotplug settings from platform" warning
PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device
PCI: imx6: Put LTSSM in "Detect" state before disabling it
MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three fixes.
One represents a nasty shared tag map regression (another inverted
condition) caused by recent SCSI MQ patches, one is a longstanding
potential buffer overrun in the iscsi data buffer and the final one is
a use after free for the rare bidirectional commands"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] fix for bidi use after free
[SCSI] fix regression that accidentally disabled block-based tcq
[SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two kernel side fixes: a kprobes fix and a perf_remove_from_context()
fix (which does not yet fix the migration bug which is WIP)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix a race condition in perf_remove_from_context()
kprobes/x86: Free 'optinsn' cache when range check fails
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
EFI fixes, a build fix, a page table dumping (debug) fix and a clang
build fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm64: Fix fdt-related memory reservation
x86/mm: Apply the section attribute to the variable, not its type
x86/efi: Fixup GOT in all boot code paths
x86/efi: Only load initrd above 4g on second try
x86-64, ptdump: Mark espfix area only if existent
x86, irq: Fix build error caused by 9eabc99a635a77cbf09
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"A fair number of build fixes for various configurations.
Fixes to BPF, and the BCM47xx platform code, a preemption fix for the
Loongson core, a syscall auditing fix, wire up the new getrandom and
memfd_create. Several patches for EVA"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (30 commits)
MIPS: SmartMIPS: Disable assembler warnings
MIPS: Move CPU topology macros to topology.h
MIPS: Wire up new syscalls getrandom and memfd_create.
MIPS: Fix a warning for virt_to_page
arch/mips/net/bpf_jit.c: fix failure check
MIPS: COP2: CPP macro safety fixes.
MIPS: Kconfig: Select SMP symbols for CMP
MIPS: ZBOOT: add missing <linux/string.h> include
MIPS: IP28: Fix/clean spaces.h
MIPS: IP28: Select correct L1_CACHE_SHIFT
MIPS: BCM63xx: delete double assignment
MIPS: Spelling s/confugrations/configurations/
MIPS: OCTEON: make get_system_type() thread-safe
MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
MIPS: EVA: Add new EVA header
MIPS: scall64-o32: Fix indirect syscall detection
MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
MIPS: Loongson: Fix COP2 usage for preemptible kernel
MIPS: NL: Fix nlm_xlp_defconfig build error
...
When ending a bi-directionional SCSI request, blk_finish_request()
cleans up and frees the request, but scsi_release_bidi_buffers() tries
to indirect through the request to find it's data buffers. This causes
a panic due to a null pointer dereference.
Move the call to scsi_release_bidi_buffers() before the call to
blk_finish_request().
Signed-off-by: Daniel Gryniewicz <dang@linuxbox.com> Reviewed-by: Webb Scales <webbnh@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[SCSI] fix regression that accidentally disabled block-based tcq
The scsi blk-mq support accidentally flipped a conditional, which lead to
never enabling block based tcq when using the legacy request path.
Fixes: d285203cf647d7c9 scsi: add support for a blk-mq based I/O path. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Mike Christie [Wed, 3 Sep 2014 05:00:39 +0000 (00:00 -0500)]
[SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu.
This function is used by iscsi drivers and userspace to send iscsi PDUs/
commands. For login commands, we have a set buffer size. For all other
commands we do not support data buffers.
This was reported by Dan Carpenter here:
http://www.spinics.net/lists/linux-scsi/msg66838.html
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Michel Dänzer [Fri, 19 Sep 2014 01:22:46 +0000 (10:22 +0900)]
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83996 Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 19 Sep 2014 00:34:34 +0000 (10:34 +1000)]
Merge tag 'drm-intel-fixes-2014-09-18' of git://anongit.freedesktop.org/drm-intel into drm-fixes
couple of display fixes.
* tag 'drm-intel-fixes-2014-09-18' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv
drm/i915: Fix SRC_COPY width on 830/845g
Dave Airlie [Fri, 19 Sep 2014 00:34:06 +0000 (10:34 +1000)]
Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- fix a resume hang on mullins
- fix an oops on module unload with vgaswitcheroo (radeon and nouveau)
- fix possible hangs DMA engine hangs due to hw bugs
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
drm/nouveau/runpm: fix module unload
drm/radeon/px: fix module unload
vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
drm/radeon: don't reset dma on r6xx-evergreen init
drm/radeon: don't reset sdma on CIK init
drm/radeon: don't reset dma on NI/SI init
drm/radeon/dpm: fix resume on mullins
drm/radeon: Disable HDP flush before every CS again for < r600
drm/radeon: delete unused PTE_* defines
Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Cc: Ben Skeggs <bskeggs@redhat.com>
Michel Dänzer [Wed, 17 Sep 2014 07:25:55 +0000 (16:25 +0900)]
drm/radeon: Disable HDP flush before every CS again for < r600
It was causing display corruption with R300 generation GPUs at least.
Reported-and-Tested-by: Mikael Pettersson <mikpelinux@gmail.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition
#define PTE_VALID (_AT(pteval_t, 1) << 0)
^
In file included from drivers/gpu/drm/radeon/r600_cs.c:31:0:
drivers/gpu/drm/radeon/r600d.h:48:0: warning: "PTE_VALID" redefined [enabled by default]
#define PTE_VALID (1 << 0)
^
In file included from ./arch/arm64/include/asm/io.h:29:0,
from include/linux/clocksource.h:19,
from include/clocksource/arm_arch_timer.h:19,
from ./arch/arm64/include/asm/arch_timer.h:27,
from ./arch/arm64/include/asm/timex.h:19,
from include/linux/timex.h:65,
<snip>
from include/drm/drmP.h:51,
from drivers/gpu/drm/radeon/r600_cs.c:29:
./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition
#define PTE_VALID (_AT(pteval_t, 1) << 0)
^
Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs/smb3 fixes from Steve French:
"Fixes for problems found during testing and debugging at the SMB3
storage test event (plugfest) this week"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
Fix mfsymlinks file size check
Update version number displayed by modinfo for cifs.ko
cifs: remove dead code
Revert "cifs: No need to send SIGKILL to demux_thread during umount"
[SMB3] Fix oops when creating symlinks on smb3
[CIFS] Fix setting time before epoch (negative time values)
Merge tag 'sound-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small fixes in random various drivers, mostly for ASoC at this
time, which look reasonable for a high rc number"
* tag 'sound-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rockchip-i2s: dt: swap tx and rx channed request number in example
ASoC: rockchip-i2s: fix registers' property of rockchip i2s controller
ASoC: rockchip-i2s: fix master mode set bit error
ASoC: cs4265: Fix register address to set the proper data type.
ALSA: hda - Fix invalid pin powermap without jack detection
ASoC: soc-pcm: fix dpcm_path_get error handling
ASoC: samsung-i2s: Check secondary DAI exists before referencing
ASoC: Update email id of the author
ASoC: dwc: Update email id of the author
ASoC: davinci-mcasp: Correct rx format unit configuration
ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclk
Krzysztof Hałasa [Thu, 18 Sep 2014 13:12:02 +0000 (15:12 +0200)]
Fix unbalanced mutex in dma_pool_create().
dma_pool_create() needs to unlock the mutex in error case. The bug was
introduced in the 3.16 by commit cc6b664aa26d ("mm/dmapool.c: remove
redundant NULL check for dev in dma_pool_create()")/
Merge tag 'regulator-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Fix some leaked OF node references in regulator drivers that have been
left over following a fix on a fix to the reference counting"
* tag 'regulator-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: remove unnecessary of_node_get() to parent
Merge tag 'spi-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes for v3.17:
- Fix davinci so that GPIO chip selects work with deferred probe of
GPIOs (which could happen in production depending on kernel config)
plus one incremental stylistic fix to that.
- Several fixes for the newly introduced rockchip driver that came up
in wider testing of the device.
- A couple of small things in the sirf driver, one bug that would
stop DMA transfers working and another update to follow the
documented procedure in the datasheet.
- Fix some memory leaks with devm_kzalloc() being used outside of the
device bind path"
* tag 'spi-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: davinci: remove empty function davinci_spi_cleanup
spi: davinci: request cs_gpio's from probe
spi/pl022: Fix error message
spi/rockchip: Mark DMA as optional
spi/rockchip: Don't warn if SPI is busy but disabled
spi/rockchip: Fix the wait_for_idle() timeout
spi: sirf: add fifo reset/start for cmd transfer
spi: sirf: enable RX_IO_DMA_INT interrupt
spi: dw: Don't use devm_kzalloc in master->setup callback
spi: fsl: Don't use devm_kzalloc in master->setup callback
NFSv4: Fix another bug in the close/open_downgrade code
James Drew reports another bug whereby the NFS client is now sending
an OPEN_DOWNGRADE in a situation where it should really have sent a
CLOSE: the client is opening the file for O_RDWR, but then trying to
do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec.
Reported-by: James Drews <drews@engr.wisc.edu> Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af356e15 (NFSv4: Fix problems with close in the presence...) Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Steve Dickson [Thu, 18 Sep 2014 13:13:17 +0000 (09:13 -0400)]
NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()
There is a race between nfs4_state_manager() and
nfs_server_remove_lists() that happens during a nfsv3 mount.
The v3 mount notices there is already a supper block so
nfs_server_remove_lists() called which uses the nfs_client_lock
spin lock to synchronize access to the client list.
At the same time nfs4_state_manager() is running through
the client list looking for work to do, using the same
lock. When nfs4_state_manager() wins the race to the
list, a v3 client pointer is found and not ignored
properly which causes the panic.
Moving some protocol checks before the state checking
avoids the panic.
CC: Stable Tree <stable@vger.kernel.org> Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This commit is triggering failures to mount by subvolume id in some
configurations. The main problem is how many different ways this
scanning function is used, both for scanning while mounted and
unmounted. A proper cleanup is too big for late rcs.
For now, just revert the commit and we'll put a better fix into a later
merge window.
Ville Syrjälä [Fri, 12 Sep 2014 12:46:29 +0000 (15:46 +0300)]
drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv
The limited color range knob is in the port registers on
g4x and vlv/chv for HDMI, and on g4x for DP. Add the relevant code
to read out the hardware state into pipe config. On vlv/chv the
DP port limited color range knob is in PIPECONF for which we
already have readout code.
Cc: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Joern Engel [Tue, 2 Sep 2014 21:49:54 +0000 (17:49 -0400)]
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
In iscsi_copy_param_list() a failed iscsi_param_list memory allocation
currently invokes iscsi_release_param_list() to cleanup, and will promptly
trigger a NULL pointer dereference.
Instead, go ahead and return for the first iscsi_copy_param_list()
failure case.
Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org> Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid
This patch fixes a bug in iscsit_logout_post_handler_diffcid() where
a pointer used as storage for list_for_each_entry() was incorrectly
being used to determine if no matching entry had been found.
This patch changes iscsit_logout_post_handler_diffcid() to key off
bool conn_found to determine if the function needs to exit early.
Reported-by: Joern Engel <joern@logfs.org> Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE
Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE for setting
the supported ALUA access states via configfs, originally introduced
in commit b0a382c5.
A value of 1 should enable the support, not disable it.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Here we move the rootdelay code to be right beside the rootwait code, so
that their behaviour is consistent.
...which is fine, but in hindsight, perhaps moving the rootwait to be
beside the rootdelay would have been better. We also indicated:
It should be noted that in doing so, the actions based on the
saved_root_name[0] and initrd_load() were previously put on hold by
rootdelay=N and now currently will not be delayed. However, I think
consistent behaviour is more important than matching historical behaviour
of delaying the above two operations.
But Pavel reported an instance where an ARM target with root on MMC
was failing to mount root, and Russell diagnosed it to the fact that
the call to set ROOT_DEV within the saved_root_name[0] processing
block mentioned above was no longer being delayed.
Rather than moving both wait clauses to the original position of
rootdelay and risking unearthing other possible corner case breakage
at this point in time, we simply revert now and we can revisit
trying the alternate/earlier location in another development cycle.
Cc: Pavel Machek <pavel@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel code overrides the default ISA as passed by the compiler
in quite a few places. This has unfortunate side effects when smartmips
is enabled leading to hundreds of warnings during build such as:
{standard input}: Assembler messages:
{standard input}:411: Warning: the `smartmips' extension requires MIPS32
revision 1 or greater
{standard input}: Assembler messages:
{standard input}:43: Warning: the 64-bit MIPS architecture does not support the
`smartmips' extension
[...]
Until the kernel code is fixed properly (if possible), disable all the
assembler warning messages to make the build logs readable again.
This has no runtime side effects but it makes it easier to spot
more critical warnings and problems during build.
Filipe Manana [Thu, 11 Sep 2014 20:22:14 +0000 (21:22 +0100)]
Btrfs: set inode's logged_trans/last_log_commit after ranged fsync
When a ranged fsync finishes if there are still extent maps in the modified
list, still set the inode's logged_trans and last_log_commit. This is important
in case an inode is fsync'ed and unlinked in the same transaction, to ensure its
inode ref gets deleted from the log and the respective dentries in its parent
are deleted too from the log (if the parent directory was fsync'ed in the same
transaction).
Instead make btrfs_inode_in_log() return false if the list of modified extent
maps isn't empty.
This is an incremental on top of the v4 version of the patch:
"Btrfs: fix fsync data loss after a ranged fsync"
which was added to its v5, but didn't make it on time.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Bruno Prémont [Sun, 24 Aug 2014 21:13:15 +0000 (23:13 +0200)]
vgaarb: Drop obsolete #ifndef
Commit 20cde694027e ("x86, ia64: Move EFI_FB vga_default_device()
initialization to pci_vga_fixup()") moved boot video device detection from
efifb to x86 and ia64 pci/fixup.c.
Remove the left-over #ifndef check that will always match since the
corresponding arch-specific define is gone with above patch.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Garrett <matthew.garrett@nebula.com>
Bruno Prémont [Sun, 24 Aug 2014 21:09:53 +0000 (23:09 +0200)]
vgaarb: Don't default exclusively to first video device with mem+io
Commit 20cde694027e ("x86, ia64: Move EFI_FB vga_default_device()
initialization to pci_vga_fixup()") moved boot video device detection from
efifb to x86 and ia64 pci/fixup.c.
For dual-GPU Apple computers above change represents a regression as code
in efifb did forcefully override vga_default_device while the merge did not
(vgaarb happens prior to PCI fixup).
To improve on initial device selection by vgaarb (it cannot know if PCI
device not behind bridges see/decode legacy VGA I/O or not), move the
screen_info based check from pci_video_fixup() to vgaarb's init function and
use it to refine/override decision taken while adding the individual PCI
VGA devices. This way PCI fixup has no reason to adjust vga_default_device
anymore but can depend on its value for flagging shadowed VBIOS.
This has the nice benefit of removing duplicated code but does introduce a
#if defined() block in vgaarb. Not all architectures have screen_info and
would cause compile to fail without it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461 Reported-and-Tested-By: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Garrett <matthew.garrett@nebula.com> CC: stable@vger.kernel.org # v3.5+
Merge tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes
Pull gfs2 fixes from Steven Whitehouse:
"Here are a number of small fixes for GFS2.
There is a fix for FIEMAP on large sparse files, a negative dentry
hashing fix, a fix for flock, and a bug fix relating to d_splice_alias
usage.
There are also (patches 1 and 5) a couple of updates which are less
critical, but small and low risk"
* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: fix d_splice_alias() misuses
GFS2: Don't use MAXQUOTAS value
GFS2: Hash the negative dentry during inode lookup
GFS2: Request demote when a "try" flock fails
GFS2: Change maxlen variables to size_t
GFS2: fs/gfs2/super.c: replace seq_printf by seq_puts
James Hogan [Tue, 16 Sep 2014 12:07:35 +0000 (13:07 +0100)]
vfs: workaround gcc <4.6 build error in link_path_walk()
Commit d6bb3e9075bb ("vfs: simplify and shrink stack frame of
link_path_walk()") introduced build problems with GCC versions older
than 4.6 due to the initialisation of a member of an anonymous union in
struct qstr without enclosing braces.
This hits GCC bug 10676 [1] (which was fixed in GCC 4.6 by [2]), and
causes the following build error:
fs/namei.c: In function 'link_path_walk':
fs/namei.c:1778: error: unknown field 'hash_len' specified in initializer
Merge tag 'asoc-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.17
This is mostly driver fixes, the biggest one being the tlv320aic31xx
which is relatively large but simple and device specific. There's a
small fix in the error handling in DPCM too which is relatively minor
error handling fix.
cifs provides two dummy functions 'sess_auth_lanman' and
'sess_auth_kerberos' for the case in which the respective
features are not defined. However, the caller is also under
an #ifdef, so we just get warnings about unused code:
fs/cifs/sess.c:1109:1: warning: 'sess_auth_kerberos' defined but not used [-Wunused-function]
sess_auth_kerberos(struct sess_data *sess_data)
Removing the dead functions gets rid of the warnings without
any downsides that I can see.
(Yalin Wang reported the identical problem and fix so added him)
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com> Signed-off-by: Steve French <smfrench@gmail.com>
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio fixes from Rusty Russell:
"virtio-rng corner case fixes, with cc:stable.
Survived a few days in linux-next"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio-rng: skip reading when we start to remove the device
virtio-rng: fix stuck of hot-unplugging busy device
Merge tag 'regmap-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Fix registers file in debugfs
Ensure that the mode reported for the registers file in debugfs is
accurate by marking it as read only when the define to enable writes
has not been set. This is on the edge of being a bug fix but it's
debugfs and it makes it much easier for users to spot what's going
wrong when they forget to enable writeability"
* tag 'regmap-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix debugfs-file 'registers' mode
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"A few quirks for i8042/AT keyboards and a small device tree doc fix
for Atmel Touchscreens"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: atmel_mxt_ts - fix merge in DT documentation
Input: i8042 - also set the firmware id for MUXed ports
Input: i8042 - add nomux quirk for Avatar AVIU-145A6
Input: i8042 - add Fujitsu U574 to no_timeout dmi table
Input: atkbd - do not try 'deactivate' keyboard on any LG laptops
iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup
This patch adds a explicit check in iscsit_find_cmd_from_itt_or_dump()
to ignore commands with ICF_GOT_LAST_DATAOUT set. This is done to
address the case where an ITT is being reused for DataOUT, but the
previous command with the same ITT has not yet been acknowledged by
ExpStatSN and removed from the per connection command list.
This issue was originally manifesting itself by referencing the
previous command during ITT lookup, and subsequently hitting the
check in iscsit_check_dataout_hdr() for ICF_GOT_LAST_DATAOUT, that
resulted in the DataOUT PDU + associated payload being silently
dumped.
Sagi Grimberg [Thu, 19 Jun 2014 10:54:19 +0000 (13:54 +0300)]
Target/iser: Fix initiator_depth and responder_resources
The iser target is the RDMA requester and the iser initiator is the
RDMA responder. In order to determine the max inflight RDMA READ requests
to set on the QP (initiator_depth), it should take the min between the
initiator published initiator_depth and the max inflight rdma read
requests its local HCA support (max_qp_init_rd_atom).
The target will never handle incoming RDMA READ requests so no need to
set responder_resources.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
rdma_disconnect may be called in 2 code flows:
- isert_wait_conn: disconnect initiated be the target
- disconnected_handler: disconnect invoked by the initiator
In case isert_conn->disconnect is true then rdma_disconnect
was called in disconnected handler, no need to call it again
from isert_wait_conn.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Target/iser: Don't put isert_conn inside disconnected handler
disconnected_handler is invoked on several CM events (such
as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since
multiple events can occur while before isert_free_conn is
invoked, we might put all isert_conn references and free
the connection too early.
Target/iser: Get isert_conn reference once got to connected_handler
In case the connection didn't reach connected state, disconnected
handler will never be invoked thus the second kref_put on
isert_conn will be missing.
Revert parts of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA
switcheroo problem related to hotplug").
A previous commit 5493b31f0b55 ("PCI: Add pci_ignore_hotplug() to ignore
hotplug events for a device") added equivalent functionality implemented in
a different way for both acpiphp and pciehp.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Rajat Jain <rajatxjain@gmail.com>
vfs: simplify and shrink stack frame of link_path_walk()
Commit 9226b5b440f2 ("vfs: avoid non-forwarding large load after small
store in path lookup") made link_path_walk() always access the
"hash_len" field as a single 64-bit entity, in order to avoid mixed size
accesses to the members.
However, what I didn't notice was that that effectively means that the
whole "struct qstr this" is now basically redundant. We already
explicitly track the "const char *name", and if we just use "u64
hash_len" instead of "long len", there is nothing else left of the
"struct qstr".
We do end up wanting the "struct qstr" if we have a filesystem with a
"d_hash()" function, but that's a rare case, and we might as well then
just squirrell away the name and hash_len at that point.
End result: fewer live variables in the loop, a smaller stack frame, and
better code generation. And we don't need to pass in pointers variables
to helper functions any more, because the return value contains all the
relevant information. So this removes more lines than it adds, and the
source code is clearer too.
Pull crypto fixes from Herbert Xu:
"This fixes the newly added drbg generator so that it actually works on
32-bit machines. Previously the code was only tested on 64-bit and on
32-bit it overflowed and simply doesn't work"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - remove check for uninitialized DRBG handle
crypto: drbg - backport "fix maximum value checks on 32 bit systems"
Steve French [Mon, 15 Sep 2014 04:27:09 +0000 (23:27 -0500)]
[SMB3] Fix oops when creating symlinks on smb3
We were not checking for symlink support properly for SMB2/SMB3
mounts so could oops when mounted with mfsymlinks when try
to create symlink when mfsymlinks on smb2/smb3 mounts
Signed-off-by: Steve French <smfrench@gmail.com> Cc: <stable@vger.kernel.org> # 3.14+ CC: Sachin Prabhu <sprabhu@redhat.com>
was to update the copy width for the compact BLT copy instruction.
Reported-by: Thomas Richter <thor@math.tu-berlin.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Richter <thor@math.tu-berlin.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Tested-by: Thomas Richter <thor@math.tu-berlin.de> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"double iput() on failure exit in lustre, racy removal of spliced
dentries from ->s_anon in __d_materialise_dentry() plus a bunch of
assorted RCU pathwalk fixes"
The RCU pathwalk fixes end up fixing a couple of cases where we
incorrectly dropped out of RCU walking, due to incorrect initialization
and testing of the sequence locks in some corner cases. Since dropping
out of RCU walk mode forces the slow locked accesses, those corner cases
slowed down quite dramatically.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
be careful with nd->inode in path_init() and follow_dotdot_rcu()
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
fix bogus read_seqretry() checks introduced in b37199e
move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
[fix] lustre: d_make_root() does iput() on dentry allocation failure
vfs: avoid non-forwarding large load after small store in path lookup
The performance regression that Josef Bacik reported in the pathname
lookup (see commit 99d263d4c5b2 "vfs: fix bad hashing of dentries") made
me look at performance stability of the dcache code, just to verify that
the problem was actually fixed. That turned up a few other problems in
this area.
There are a few cases where we exit RCU lookup mode and go to the slow
serializing case when we shouldn't, Al has fixed those and they'll come
in with the next VFS pull.
But my performance verification also shows that link_path_walk() turns
out to have a very unfortunate 32-bit store of the length and hash of
the name we look up, followed by a 64-bit read of the combined hash_len
field. That screws up the processor store to load forwarding, causing
an unnecessary hickup in this critical routine.
It's caused by the ugly calling convention for the "hash_name()"
function, and easily fixed by just making hash_name() fill in the whole
'struct qstr' rather than passing it a pointer to just the hash value.
With that, the profile for this function looks much smoother.
Steve French [Sun, 14 Sep 2014 22:06:36 +0000 (17:06 -0500)]
[CIFS] Fix setting time before epoch (negative time values)
xfstest generic/258 sets the time on a file to a negative value
(before 1970) which fails since do_div can not handle negative
numbers. In addition 'normal' division of 64 bit values does
not build on 32 bit arch so have to workaround this by special
casing negative values in cifs_NTtimeToUnix
Samba server also has a bug with this (see samba bugzilla 7771)
but it works to Windows server.
Merge branch 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"The most important patch is a new Light Weigth Syscall (LWS) for 8,
16, 32 and 64 bit atomic CAS operations which is required in order to
be able to implement the atomic gcc builtins on our platform.
Other than that, we wire up the seccomp, getrandom and memfd_create
syscalls, fixes a minor off-by-one bug and a wrong printk string"
* 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Implement new LWS CAS supporting 64 bit operations.
parisc: Wire up seccomp, getrandom and memfd_create syscalls
parisc: dino: fix %d confusingly prefixed with 0x in format string
parisc: sys_hpux: NUL terminator is one past the end
Al Viro [Sun, 14 Sep 2014 01:59:43 +0000 (21:59 -0400)]
be careful with nd->inode in path_init() and follow_dotdot_rcu()
in the former we simply check if dentry is still valid after picking
its ->d_inode; in the latter we fetch ->d_inode in the same places
where we fetch dentry and its ->d_seq, under the same checks.
Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Sep 2014 01:55:46 +0000 (21:55 -0400)]
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
return the value instead, and have path_init() do the assignment. Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination. This one should go where
it went.
To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers. And do the same to set_root(), to keep them
in sync.
Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
projects / linux-beck.git / log