Jiang Liu [Thu, 6 Jun 2013 16:07:22 +0000 (00:07 +0800)]
zram: avoid invalid memory access in zram_exit()
Memory for zram->disk object may have already been freed after returning
from destroy_device(zram), then it's unsafe for zram_reset_device(zram)
to access zram->disk again.
We can't solve this bug by flipping the order of destroy_device(zram)
and zram_reset_device(zram), that will cause deadlock issues to the
zram sysfs handler.
So fix it by holding an extra reference to zram->disk before calling
destroy_device(zram).
Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a local variable for the 'reg' offset that is stored in the
comedi_subdevice 'private' pointer to minimize the number of casts.
Also, add local variables for the 'mask' and 'bits'.
The outputs only need to be updated if the 'mask' indicates that the
'bits' are changing. Move the update code into the main 'if (mask)'
block.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmad: properly handle analog input encoding configuration
The comedi_config utility is used to attach to this board. One of the
configuration options passed by the user sets the analog input encoding
for straight binary or two's complement data. The hardware produces
straight binary data when jumpered for 5V unipolar inputs and two's
complement data when jumpered for +-10V bipolar inputs.
Use the configuration option to correctly set the comedi_subdevice
range_table.
We can then use a helper function to determine what the range is when
reading the analog inputs. This allows removing the 'twos_comp' variable
from the private data (which was actually never used).
Since the private data is now empty, remove it completely.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_config utility is used to attach to this board. One of the
configuration options passed by the user sets the analog input reference
for single-ended or differential inputs.
Use the configuration option to correctly set the comedi_subdevice flags
as well as the number of channels.
Remove the 'differential' variable from the private data. Its not used
by the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcmad: remove need for boardinfo in pcmad_ai_insn_read()
The const boardinfo pointer is only used in this function to work out
the value needed to convert the data to its twos complement. Use the
comedi_subdevice 'maxdata' to do this conversion and remove the 'board'
pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
read_nic_*() functions are defined in r8192U_core.c.
They call internally usb_control_msg() to read the
nic registers and return the value read.
Following a remark made by Dan Carpenter, if usb_control_msg()
fails, the value returned will be invalid.
To accommodate for this, this patch changes the functions
to take a pointer as argument to set the value read and
return 0 on success and the error status on failure, so
that callers of read_nic_*() can check the return status.
Some other fixes introduced in read_nic_*() functions are:
The expressions (1<<EPROM_*_SHIFT) used to address and set
the individual bits of the eeprom register were replaced
with EPROM_*_BIT bitmasks to make the code more intuitive.
EPROM_*_BIT bitmasks were defined in r8192U_hw.h and
EPROM_*_SHIFT were removed.
In netdev_err(), which is called in case of failure,
the hardcoded function name in the error log message was
replaced with __func__ to reduce line size.
Also, from the error log message, it was omitted the word
"Timeout" and it is just reported the error code since the
failure can not only be due to timeout expiration but also
due to a memory allocation failure. In case of timeout
expiration, usb_start_wait_urb() prints an appropriate log
message when debug is enabled.
Finally, some minor fixes to the coding style were applied in
lines affected by the above changes, including the removal
of ifdef DEBUG_RX (the debugging of reads and writes of the
nic registers shall be done with explicit check on their
return status which will be added in a follow on patch).
Dan Carpenter [Thu, 6 Jun 2013 07:30:49 +0000 (10:30 +0300)]
Staging: rtl8192u: fix a reversed test
Sean MacLennan fixed this in the rtl8192e driver and we should fix
it here as well.
It's pretty harmless. This information comes from the firmware, if
we were to hit this bug we would read beyond the end of the array
once or twice before returning and update our statistics with bogus
data.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Lawniczak [Thu, 6 Jun 2013 16:10:47 +0000 (18:10 +0200)]
keucr: migrate printk to dev_dbg/info/warn/err
as per suggestion of checkpatch.pl; this resolves warnings like "Prefer
netdev_info .. then dev_info .. to printk".
Changed signature of function usb_stor_print_cmd in init.c to enable
usage of dev_err
Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com> Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Thu, 6 Jun 2013 14:59:13 +0000 (22:59 +0800)]
staging/lustre/libcfs: cleanup linux-crypto
We don't need to implement crc32 and crc32pclmul on our own.
The crc32-pclmul support was merged into the 3.8 kernel in commit 78c37d1, no need to keep a local copy in Lustre anymore.
The crc32 implementation is identical to crypto-crc32. So drop
Lustre's private implementation and select kernel crypto in Kconfig.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: rtl8192u: replace macro rx_hal_is_cck_rate() in r8192U_core.c
This patch replaces macro rx_hal_is_cck_rate() with
the static inline function rx_hal_is_cck_rate().
This replacement was suggested by Dan Carpenter and
has the following benefits:
- improves code readability
- guarantees type safety
- improves code efficiency by enforcing the evaluation of
the simple boolean expression (!pdrvinfo->RxHT) to be
done before the evaluation of the more complex one
(pdrvinfo->RxRate == DESC90_RATE1M ||
pdrvinfo->RxRate == DESC90_RATE2M ||
pdrvinfo->RxRate == DESC90_RATE5_5M ||
pdrvinfo->RxRate == DESC90_RATE11M)
staging: rtl8192u: add spaces around ?:&&|| in r8192U_core.c
This patch fixes the following checkpatch errors:
ERROR: spaces required around that '?'
ERROR: spaces required around that ':'
ERROR: spaces required around that '&&'
ERROR: spaces required around that '||'
staging: comedi: pcmda12: rename the analog output (*insn_{read, write}) functions
For aesthetic reasons. rename these functions so they have namespace
associated with the driver. Also remove the unnecessary '&' when setting
the callbacks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'BITS' is a pretty generic name for a define. It's only used in
the board attach to set the subdevice 'maxdata' so instead of
renaming the define just open code the value and remove the define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor this function into two new functions in order to reduce the indent
levels and clean up the ugly line breaks that, unsuccessfully, try to keep
the lines < 80 chars.
The first function handles the irq for a specific asic.
The second function handles the irq for a specific subdevice that is
associated with the asic.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Chan [Tue, 4 Jun 2013 05:55:38 +0000 (22:55 -0700)]
staging: gdm72xx: WIMAX_GDM72XX should depend on either USB or MMC
The gdm72xx driver needs to have either the USB or SDIO implementation
enabled to provide useful functionalities, so the driver should depend
on either USB or MMC. This patch makes WIMAX_GDM72XX depend on either
USB or MMC.
Also, WIMAX_GDM72XX needs to be built as a module if its dependent
interface, either USB or MMC, is built as a module. This patch enforces
that in the WIMAX_GDM72XX_USB and WIMAX_GDM72XX_SDIO dependency.
Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ben Chan <benchan@chromium.org> Cc: Sage Ahn <syahn@gctsemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Wed, 5 Jun 2013 13:13:40 +0000 (21:13 +0800)]
staging/lustre/lprocfs: interpret result of dt_statfs() correctly
I accidentally reversed the sense of the error check after the call to
dt_statfs() in lprocfs_dt_rd_{blksize,{files,kbytes}{free,avail}.
Unreverse the error checking.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3300
Lustre-change: http://review.whamcloud.com/6385 Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Robert Read <robert.read@intel.com> Reviewed-by: Emoly Liu <emoly.liu@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Sat, 1 Jun 2013 18:42:58 +0000 (21:42 +0300)]
staging: MIPS: add Octeon USB HCD support
Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB
mass storage.
The driver has been extracted from GPL sources of EdgeRouter Lite firmware
(based on Linux 2.6.32.13). Some minor fixes and cleanups have been done
to make it work with 3.10-rc3.
$ uname -a
Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux
$ modprobe octeon-usb
[ 37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned.
[ 37.983649] OcteonUSB: Detected 1 ports
[ 37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller
[ 38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
[ 38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
[ 38.019970] hub 1-0:1.0: USB hub found
[ 38.023851] hub 1-0:1.0: 1 port detected
[ 38.028101] OcteonUSB: Registered HCD for port 0 on irq 122
[ 38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB
[ 38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 38.597375] scsi0 : usb-storage 1-1:1.0
[ 39.604111] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[ 39.630696] sd 0:0:0:0: [sda] Write Protect is off
[ 39.635945] sd 0:0:0:0: [sda] No Caching mode page present
[ 39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 39.651341] sd 0:0:0:0: [sda] No Caching mode page present
[ 39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 39.664296] sda: sda1 sda2
[ 39.675574] sd 0:0:0:0: [sda] No Caching mode page present
[ 39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harsh Kumar [Fri, 31 May 2013 15:30:42 +0000 (21:00 +0530)]
Staging: winbond: Check for unsuccessful allocation immediately
Check to see if allocation by kzalloc() or usb_alloc_urb() was unsuccessful
immediately after the allocation. Exit from the function can be right at that
point in case of allocation failure.
This avoids unnecessary use of usb_alloc_urb() & usb_free_urb() if kzalloc()
returns NULL.
Also, makes the code better structured & easier to understand.
Dan Carpenter [Thu, 30 May 2013 08:00:34 +0000 (11:00 +0300)]
Staging: crystalhd: remove an unneeded NULL check
We already established earlier in the function that "temp" is
non-NULL. We also don't need to set to NULL because it's a stack
variable an we return immediately.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: rts5139: Use correct USB transfer interval to fix syslog spamming
Using correct transfer interval as specified by the USB endpoint
when doing the interrupt transfer fixes the warning printed by
xhci USB core on every transfer that resulted in spamming
"xhci_queue_intr_tx: 74 callbacks suppressed" to syslog
every 5 seconds.
Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: rts5139: Fix SD card detection on Samsung NP730U3E Ultrabook
The timeout detection implemented in this driver isn't very
robust. Although the USB interrupt transfer was successful,
the polling thread often reported timeouts because the 50ms
had expired before it got scheduled, and the SD card wasn't
detected. Increasing it to 100ms, as used in other places of
this driver, makes it work.
Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Mon, 3 Jun 2013 02:08:13 +0000 (10:08 +0800)]
staging/lustre: fix return value check in libcfs_sock_ioctl()
In case of error, the function sock_alloc_file() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
projects / linux-beck.git / log