hostfs: set maximum filesize in superblock for proper LFS support
Maximum file size for hostfs mounts defaults to 2GB, so bigger files cannot be
read/written through hostfs. This patch initializes the maximum file size to
MAX_LFS_SIZE.
Signed-off-by: Wolfgang Illmeyer <wolfgang@illmeyer.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Tue, 30 Jun 2009 18:41:43 +0000 (11:41 -0700)]
bfin: delay IRQ registration until driver is ready
Make sure we do not actually request the RTC IRQ until the device driver
is fully ready to handle and process any interrupt. This way a spurious
interrupt won't crash the system (which may happen if the bootloader was
poking the RTC right before booting Linux).
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ville Syrjala [Tue, 30 Jun 2009 18:41:42 +0000 (11:41 -0700)]
atyfb: fix alignment for block writes
Block writes require 64 byte alignment. Since block writes could be used
with SGRAM or WRAM also refine the memory type detection to check for
either type before deciding to use the 64 byte alignment.
Signed-off-by: Ville Syrjala <syrjala@sci.fi> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ville Syrjala [Tue, 30 Jun 2009 18:41:40 +0000 (11:41 -0700)]
atyfb: fix HP OmniBook 500 reboot hang
Apparently HP OmniBook 500's BIOS doesn't like the way atyfb reprograms
the hardware. The BIOS will simply hang after a reboot. Fix the problem
by restoring the hardware to it's original state on reboot.
Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yinghai Lu [Tue, 30 Jun 2009 18:41:37 +0000 (11:41 -0700)]
x86: only clear node_states for 64bit
Nathan reported that
| commit 73d60b7f747176dbdff826c4127d22e1fd3f9f74
| Author: Yinghai Lu <yinghai@kernel.org>
| Date: Tue Jun 16 15:33:00 2009 -0700
|
| page-allocator: clear N_HIGH_MEMORY map before we set it again
|
| SRAT tables may contains nodes of very small size. The arch code may
| decide to not activate such a node. However, currently the early boot
| code sets N_HIGH_MEMORY for such nodes. These nodes therefore seem to be
| active although these nodes have no present pages.
|
| For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too
unintentionally and incorrectly clears the cpuset.mems cgroup attribute on
an i386 kvm guest, meaning that cpuset.mems can not be used.
Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only.
and need to do save/restore for that in find_zone_movable_pfn
Reported-by: Nathan Lynch <ntl@pobox.com> Tested-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cpusets: document adding/removing cpus to cpuset elaborately
By writing a tasks's pid to the file, a process adds that task to that
cgroup/cpuset. But to add a cpu/mem to a cpuset, the new list of cpus
should be written to the cpuset.mems file which would replace the old list
of cpus. Make this clearer in the documentation.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard Kennedy [Tue, 30 Jun 2009 18:41:35 +0000 (11:41 -0700)]
mm: prevent balance_dirty_pages() from doing too much work
balance_dirty_pages can overreact and move all of the dirty pages to
writeback unnecessarily.
balance_dirty_pages makes its decision to throttle based on the number of
dirty plus writeback pages that are over the calculated limit,so it will
continue to move pages even when there are plenty of pages in writeback
and less than the threshold still dirty.
This allows it to overshoot its limits and move all the dirty pages to
writeback while waiting for the drives to catch up and empty the writeback
list.
A simple fio test easily demonstrates this problem.
This is the simplest fix I could find, but I'm not entirely sure that it
alone will be enough for all cases. But it certainly is an improvement on
my desktop machine writing to 2 disks.
Do we need something more for machines with large arrays where
bdi_threshold * number_of_drives is greater than the dirty_ratio ?
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Renaud Lottiaux [Tue, 30 Jun 2009 18:41:34 +0000 (11:41 -0700)]
bsdacct: fix access to invalid filp in acct_on()
The file opened in acct_on and freshly stored in the ns->bacct struct can
be closed in acct_file_reopen by a concurrent call after we release
acct_lock and before we call mntput(file->f_path.mnt).
Record file->f_path.mnt in a local variable and use this variable only.
Signed-off-by: Renaud Lottiaux <renaud.lottiaux@kerlabs.com> Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Tue, 30 Jun 2009 18:41:30 +0000 (11:41 -0700)]
spi: bitbang bugfix in message setup
Bugfix to spi_bitbang infrastructure: make sure to always set transfer
parameters on the first pass through the message's per-transfer loop.
This can matter with drivers that replace the per-word or per-buffer
transfer primitives, on busses with multiple SPI devices.
Previously, this could have started messages using the settings left after
previous messages. The problem was observed when a high speed chip
(m25p80 type flash) was running very slowly because a low speed device
(avr8 microcontroller) had previously used the bus. Similar faults could
have driven the low speed device too fast, or used an unexpected word
size.
Acked-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Helt [Tue, 30 Jun 2009 18:41:29 +0000 (11:41 -0700)]
fbdev: add mutex for fb_mmap locking
Add a mutex to avoid a circular locking problem between the mm layer
semaphore and fbdev ioctl mutex through the fb_mmap() call.
Also, add mutex to all places where smem_start and smem_len fields change
so the mutex inside the fb_mmap() is actually used. Changing of these
fields before calling the framebuffer_register() are not mutexed.
This is 2.6.31 material. It removes one lockdep (fb_mmap() and
register_framebuffer()) but there is still another one (fb_release() and
register_framebuffer()). It also cleans up handling of the smem_start and
smem_len fields used by mutexed section of the fb_mmap().
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Tue, 30 Jun 2009 18:41:27 +0000 (11:41 -0700)]
spi: add spi_master flag word
Add a new spi_master.flags word listing constraints relevant to that
controller. Define the first constraint bit: a half duplex restriction.
Include that constraint in the OMAP1 MicroWire controller driver.
Have the mmc_spi host be the first customer of this flag. Its coding
relies heavily on full duplex transfers, so it must fail when the
underlying controller driver won't perform them.
(The spi_write_then_read routine could use it too: use the
temporarily-withdrawn full-duplex speedup unless this flag is set, in
which case the existing code applies. Similarly, any spi_master
implementing only SPI_3WIRE should set the flag.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Tue, 30 Jun 2009 18:41:26 +0000 (11:41 -0700)]
spi: new spi->mode bits
Add two new spi_device.mode bits to accomodate more protocol options, and
pass them through to usermode drivers:
* SPI_NO_CS ... a second 3-wire variant, where the chipselect
line is removed instead of a data line; transfers are still
full duplex.
This obviously has STRONG protocol implications since the
chipselect transitions can't be used to synchronize state
transitions with the SPI master.
* SPI_READY ... defines open drain signal that's pulled low
to pause the clock. This defines a 5-wire variant (normal
4-wire SPI plus READY) and two 4-wire variants (READY plus
each of the 3-wire flavors).
Such hardware flow control can be a big win. There are ADC
converters and flash chips that expose READY signals, but not
many host controllers support it today.
The spi_bitbang code should be changed to use SPI_NO_CS instead of its
current nonportable hack. That's a mode most hardware can easily support
(unlike SPI_READY).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Paulraj, Sandeep" <s-paulraj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Tue, 30 Jun 2009 18:41:25 +0000 (11:41 -0700)]
dmapools: protect page_list walk in show_pools()
show_pools() walks the page_list of a pool w/o protection against the list
modifications in alloc/free. Take pool->lock to avoid stomping into
nirvana.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bryan Donlan [Tue, 30 Jun 2009 18:41:24 +0000 (11:41 -0700)]
ext2: return -EIO not -ESTALE on directory traversal through deleted inode
ext2_iget() returns -ESTALE if invoked on a deleted inode, in order to
report errors to NFS properly. However, in ext[234]_lookup(), this
-ESTALE can be propagated to userspace if the filesystem is corrupted such
that a directory entry references a deleted inode. This leads to a
misleading error message - "Stale NFS file handle" - and confusion on the
part of the admin.
The bug can be easily reproduced by creating a new filesystem, making a
link to an unused inode using debugfs, then mounting and attempting to ls
-l said link.
This patch thus changes ext2_lookup to return -EIO if it receives -ESTALE
from ext2_iget(), as ext2 does for other filesystem metadata corruption;
and also invokes the appropriate ext*_error functions when this case is
detected.
With ELF, at generating coredump, some more headers other than used
vmas are added.
When max_map_count == 65536, a core generated by following kinds of
code can be unreadable because the number of ELF's program header is
written in 16bit in Ehdr (please see elf.h) and the number overflows.
Commonly available versions of cp and tar don't work well with special
files created using seq_file. Mention this problem in the gcov
documentation and update the helper script example to work around these
problems.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Tue, 30 Jun 2009 18:41:18 +0000 (11:41 -0700)]
alpha: fix percpu build breakage
alpha percpu access requires custom SHIFT_PERCPU_PTR() definition for
modules to work around addressing range limitation. This is done via
generating inline assembly using C preprocessing which forces the
assembler to generate external reference. This happens behind the
compiler's back and makes the compiler think that static percpu variables
in modules are unused.
This used to be worked around by using __unused attribute for percpu
variables which prevent the compiler from omitting the variable; however,
recent declare/definition attribute unification change broke this as
__used can't be used for declaration. Also, in the process,
PER_CPU_ATTRIBUTES definition in alpha percpu.h got broken.
This patch adds PER_CPU_DEF_ATTRIBUTES which is only used for definitions
and make alpha use it to add __used for percpu variables in modules. This
also fixes the PER_CPU_ATTRIBUTES double definition bug.
Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: maximilian attems <max@stro.at> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell [Tue, 30 Jun 2009 18:41:15 +0000 (11:41 -0700)]
fbdev: work around old compiler bug
When building with a 4.1.x compiler on powerpc64 (at least) we get this
error:
drivers/video/logo/logo_linux_mono.c:81: error: logo_linux_mono causes a section type conflict
This was introduced by commit ae52bb2384f721562f15f719de1acb8e934733cb
("fbdev: move logo externs to header file"). This is a partial revert of
that commit sufficient to not hit the compiler bug.
Also convert _clut arrays from __initconst to __initdata.
Sam said:
Al analysed this some time ago. When we say something is const then
_sometimes_ gcc annotate the section as const(?) - sometimes not. So if
we have two variables/functions annotated __*const and gcc decides to
annotate the section const only in one case we get a section type
conflict.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko Carstens [Tue, 30 Jun 2009 18:41:13 +0000 (11:41 -0700)]
gcov: fix __ctors_start alignment
The ctors section for each object file is eight byte aligned (on 64 bit).
However the __ctors_start symbol starts at an arbitrary address dependent
on the size of the previous sections.
Therefore the linker may add some zeroes after __ctors_start to make sure
the ctors contents are properly aligned. However the extra zeroes at the
beginning aren't expected by the code. When walking the functions
pointers contained in there and extra zeroes are added this may result in
random jumps. So make sure that the __ctors_start symbol is always
aligned as well.
Davide Libenzi [Tue, 30 Jun 2009 18:41:11 +0000 (11:41 -0700)]
eventfd: revised interface and cleanups
Change the eventfd interface to de-couple the eventfd memory context, from
the file pointer instance.
Without such change, there is no clean way to racely free handle the
POLLHUP event sent when the last instance of the file* goes away. Also,
now the internal eventfd APIs are using the eventfd context instead of the
file*.
This patch is required by KVM's IRQfd code, which is still under
development.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Gregory Haskins <ghaskins@novell.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY
ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y
ide-cd: handle fragmented packet commands gracefully
ide: always kill the whole request on error
ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests
ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY
This patch fixes a memory overrun in function ide_get_identity_ioctl() which
chooses the size of a memory buffer depending on the ioctl command that led
to the function call, however, passes that buffer to a function which needs the
buffer size to be always chosen unconditionally.
Due to conditional compilation the memory overrun can only happen on big endian
machines. The error can be triggered using ioctl HDIO_OBSOLETE_IDENTITY. Usage
of ioctl HDIO_GET_IDENTITY is safe.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
commit 2f0d0fd2a605666d38e290c5c0d2907484352dc4 ("ide-acpi: cleanup
do_drive_get_GTF()") didn't account for the lack of hwif->acpidata
check in generic_ide_suspend() [ indirect user of do_drive_get_GTF()
through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI
support is enabled but ACPI data is unavailable.
Fix it by adding ide_port_acpi() helper for checking if port needs
ACPI handling and cleaning generic_ide_{suspend,resume}() to use it
instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI
helpers (this should help in preventing similar bugs in the future).
While at it:
- kill superfluous debugging printks in ide_acpi_{get,push}_timing()
Reported-and-tested-by: Etienne Basset <etienne.basset@numericable.fr> Also-reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 29 Jun 2009 16:46:12 +0000 (09:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
sound: OSS: mpu401, fix deadlock
ALSA: hda - Add missing initializations for ALC268 and ALC269
ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug
ALSA: hda - Line In for Acer Inspire 6530G model
sound: oxygen: make mic volume control mono
MAINTAINERS: Add entry for twl4030 series soc codec driver
ALSA: lx6464es - configure ethersound io channels
sound: Use PCI_VDEVICE for CREATIVE and ECTIVA
sound: Use PCI_VDEVICE
ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930G
ALSA: hda - Fix acer-aspire-6530g model quirk
ALSA: hda - Add pin-sense trigger when needed for Realtek codecs
ALSA: hda - Fix support for Samsung P50 with AD1986A codec
ALSA: hda - Generalize the pin-detect quirk for Lenovo N100
ALSA: hda - Simplify AD1986A mixer definitions
Linus Torvalds [Mon, 29 Jun 2009 16:42:01 +0000 (09:42 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
Revert "x86: cap iomem_resource to addressable physical memory"
Ingo Molnar [Mon, 29 Jun 2009 08:07:54 +0000 (10:07 +0200)]
eeepc-laptop: Fix build failure with HOTPLUG_PCI && !SYSFS
FYI, there's a post-rc1 build regression with certain configs:
drivers/built-in.o: In function `pci_hp_deregister':
(.text+0xb166): undefined reference to `pci_hp_remove_module_link'
drivers/built-in.o: In function `pci_hp_deregister':
(.text+0xb19f): undefined reference to `pci_destroy_slot'
drivers/built-in.o: In function `__pci_hp_register':
(.text+0xb583): undefined reference to `pci_create_slot'
drivers/built-in.o: In function `__pci_hp_register':
(.text+0xb5b1): undefined reference to `pci_hp_create_module_link'
make: *** [.tmp_vmlinux1] Error 1
Alan Cox [Mon, 29 Jun 2009 14:21:47 +0000 (15:21 +0100)]
tty: Fix the leak in tty_ldisc_release
Currently we reinit the ldisc on final tty close which is what the old code
did to ensure that if the device retained its termios settings then it had the
right ldisc. tty_ldisc_reinit does that but also leaves us with the reset
ldisc reference which is then leaked.
At this point we know the port will be recycled so we can kill the ldisc
off completely rather than try and add another ldisc free up when the kref
count hits zero.
At this point it is safe to keep the ldisc closed as tty_ldisc waiting
methods are only used from the user side, and as the final close we are
the last such reference. Interrupt/driver side methods will always use the
non wait version and get back a NULL.
Found with kmemleak and investigated/identified by Catalin Marinas.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Mon, 29 Jun 2009 16:05:02 +0000 (18:05 +0200)]
Merge branch 'fix/hda' into for-linus
* fix/hda:
ALSA: hda - Add missing initializations for ALC268 and ALC269
ALSA: hda - Line In for Acer Inspire 6530G model
ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930G
ALSA: hda - Fix acer-aspire-6530g model quirk
ALSA: hda - Add pin-sense trigger when needed for Realtek codecs
Jeremy Kerr [Mon, 29 Jun 2009 06:31:58 +0000 (14:31 +0800)]
fs: allow d_instantiate to be called with negative parent dentry
The new fsnotify infrastructure (starting at 90586523) causes an oops in
spufs, where we populate a directory with files before instantiating the
directory itself. The new changes seem to have introduced an assumption
that a dentry's parent will be positive when instantiating.
This change makes it once again possible to d_instantiate a dentry
with a negative parent, and brings __fsnotify_d_instantiate() into
line with inotify_d_instantiate(), which already has this NULL check.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Eric Paris <eparis@redhat.com>
Nicolas Ferre [Mon, 29 Jun 2009 11:11:50 +0000 (12:11 +0100)]
[ARM] 5562/2: at91: add gpio button support for at91sam9g20ek
This adds input keyboard gpio support on at91sam9g20ek board.
It adds button 3 and 4.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Takashi Iwai [Mon, 29 Jun 2009 09:33:53 +0000 (11:33 +0200)]
ALSA: hda - Add missing initializations for ALC268 and ALC269
During the changes to clean up / fix the realtek codec initialization
routines in commit 4a79ba34cada6a5a4ee86ed53aa8a73ba1e6fc51,
I forgot to add the check for ALC268 and ALC269.
This resulted in the missing EAPD and COEF setup for these codecs.
This patch adds the missing checks for these codecs.
Tony Vroon [Fri, 26 Jun 2009 08:27:50 +0000 (09:27 +0100)]
ALSA: hda - Line In for Acer Inspire 6530G model
The Line In connector is set up as PIN_IN by default, using
VREF_HIZ. It is connected to both ADCs, so add it to both
input selectors.
Also add the ability to use the input mix (on a SoundBlaster
one would call this "What You Hear").
Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
be2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames.
gro: Flush GRO packets in napi_disable_pending path
inet: Call skb_orphan before tproxy activates
mac80211: Use rcu_barrier() on unload.
sunrpc: Use rcu_barrier() on unload.
bridge: Use rcu_barrier() instead of syncronize_net() on unload.
ipv6: Use rcu_barrier() on module unload.
decnet: Use rcu_barrier() on module unload.
sky2: Fix checksum endianness
mdio add missing GPL flag
sh_eth: remove redundant test on unsigned
fsl_pq_mdio: Fix fsl_pq_mdio to work with modules
ipv6: avoid wraparound for expired preferred lifetime
tcp: missing check ACK flag of received segment in FIN-WAIT-2 state
atl1*: add device_set_wakeup_enable to atl1*_set_wol
Phonet: generate Netlink RTM_DELADDR when destroying a device
Phonet: publicize the Netlink notification function
Revert "veth: prevent oops caused by netdev destructor"
cpmac: fix compilation failure introduced with netdev_ops conversion
ipsec: Fix name of CAST algorithm
Ajit Khaparde [Fri, 26 Jun 2009 02:51:07 +0000 (02:51 +0000)]
be2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames.
While testing the driver on PPC, we ran into a crash with LRO, Jumbo frames.
With CONFIG_PPC_64K_PAGES configured (a default in PPC), MAX_SKB_FRAGS drops to 3 and we were crossing the array limits on skb_shinfo(skb)->frags[].
Now we coalesce the frags from the same physical page into one slot in
skb_shinfo(skb)->frags[] and go to the next index when the frag is from
different physical page.
This patch is against the net-2.6 tree.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mimi Zohar [Fri, 26 Jun 2009 18:05:27 +0000 (14:05 -0400)]
integrity: add ima_counts_put (updated)
This patch fixes an imbalance message as reported by J.R. Okajima.
The IMA file counters are incremented in ima_path_check. If the
actual open fails, such as ETXTBSY, decrement the counters to
prevent unnecessary imbalance messages.
Linus Torvalds [Sun, 28 Jun 2009 18:12:52 +0000 (11:12 -0700)]
Merge branch 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: shut up uninit compiler warning in paging_tmpl.h
KVM: Ignore reads to K7 EVNTSEL MSRs
KVM: VMX: Handle vmx instruction vmexits
KVM: s390: Allow stfle instruction in the guest
KVM: kvm/x86_emulate.c toggle_interruptibility() should be static
KVM: ia64: fix ia64 build due to missing kallsyms_lookup() and double export
KVM: protect concurrent make_all_cpus_request
KVM: MMU: Allow 4K ptes with bit 7 (PAT) set
KVM: Fix dirty bit tracking for slots with large pages
Linus Torvalds [Sun, 28 Jun 2009 18:05:28 +0000 (11:05 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, delay: tsc based udelay should have rdtsc_barrier
x86, setup: correct include file in <asm/boot.h>
x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h>
x86, mce: percpu mcheck_timer should be pinned
x86: Add sysctl to allow panic on IOCK NMI error
x86: Fix uv bau sending buffer initialization
x86, mce: Fix mce resume on 32bit
x86: Move init_gbpages() to setup_arch()
x86: ensure percpu lpage doesn't consume too much vmalloc space
x86: implement percpu_alloc kernel parameter
x86: fix pageattr handling for lpage percpu allocator and re-enable it
x86: reorganize cpa_process_alias()
x86: prepare setup_pcpu_lpage() for pageattr fix
x86: rename remap percpu first chunk allocator to lpage
x86: fix duplicate free in setup_pcpu_remap() failure path
percpu: fix too lazy vunmap cache flushing
x86: Set cpu_llc_id on AMD CPUs
Linus Torvalds [Sun, 28 Jun 2009 18:05:16 +0000 (11:05 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timer stats: Optimize by adding quick check to avoid function calls
timers: Fix timer_migration interface which accepts any number as input
Linus Torvalds [Sun, 28 Jun 2009 18:05:04 +0000 (11:05 -0700)]
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ftrace: Fix the output of profile
ring-buffer: Make it generally available
ftrace: Remove duplicate newline
tracing: Fix trace_buf_size boot option
ftrace: Fix t_hash_start()
ftrace: Don't manipulate @pos in t_start()
ftrace: Don't increment @pos in g_start()
tracing: Reset iterator in t_start()
trace_stat: Don't increment @pos in seq start()
tracing_bprintk: Don't increment @pos in t_start()
tracing/events: Don't increment @pos in s_start()
Linus Torvalds [Sun, 28 Jun 2009 18:02:32 +0000 (11:02 -0700)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
leds: Futher document blink_set
leds: Add options to have GPIO LEDs start on or keep their state
leds: LED driver for National Semiconductor LP3944 Funlight Chip
leds: pca9532 - Indent using tabs, not spaces.
leds: Remove an orphan Kconfig entry
leds: Further document parameters for blink_set()
leds: alix-leds2 fixed for Award BIOS
leds: leds-gpio - fix a section mismatch
leds: add the sysfs interface into the leds-bd2802 driver for changing wave pattern and led current.
leds: change the license information
leds: fix led-bd2802 errors while resuming
KVM: shut up uninit compiler warning in paging_tmpl.h
Dixes compilation warning:
CC arch/x86/kernel/io_delay.o
arch/x86/kvm/paging_tmpl.h: In function ‘paging64_fetch’:
arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function
arch/x86/kvm/paging_tmpl.h: In function ‘paging32_fetch’:
arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function
warning is bogus (always have a least one level), but need to shut the compiler
up.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2.6.31-rc introduced an architecture level set checker based on facility
bits. e.g. if the kernel is compiled to run only on z9, several facility
bits are checked very early and the kernel refuses to boot if a z9 specific
facility is missing.
Until now kvm on s390 did not implement the store facility extended (STFLE)
instruction. A 2.6.31-rc kernel that was compiled for z9 or higher did not
boot in kvm. This patch implements stfle.
This patch should go in before 2.6.31.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
H. Peter Anvin [Sat, 27 Jun 2009 19:22:27 +0000 (12:22 -0700)]
Revert "x86: cap iomem_resource to addressable physical memory"
This reverts commit 95ee14e4379c5e19c0897c872350570402014742.
Mikael Petterson <mikepe@it.uu.se> reported that at least one of his
systems will not boot as a result. We have ruled out the detection
algorithm malfunctioning, so it is not a matter of producing the
incorrect bitmasks; rather, something in the application of them
fails.
Revert the commit until we can root cause and correct this problem.
-stable team: this means the underlying commit should be rejected.
Reported-and-isolated-by: Mikael Petterson <mikpe@it.uu.se> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <200906261559.n5QFxJH8027336@pilspetsen.it.uu.se> Cc: stable@kernel.org Cc: Grant Grundler <grundler@parisc-linux.org>
When this lock was converted to a mutex, the locks were turned into
unlocks and vice-versa.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
Here is a little update to the at91sam9rlek lcd interface.
This will correct the power pin of the LCD.
It will also add precision to the struct atmel_lcdfb_info
scructure: backlight enabling and wiring mode correction:
RGB wiring on the -EK board.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Herbert Xu [Sat, 27 Jun 2009 02:27:04 +0000 (19:27 -0700)]
gro: Flush GRO packets in napi_disable_pending path
When NAPI is disabled while we're in net_rx_action, we end up
calling __napi_complete without flushing GRO packets. This is
a bug as it would cause the GRO packets to linger, of course it
also literally BUGs to catch error like this :)
This patch changes it to napi_complete, with the obligatory IRQ
reenabling. This should be safe because we've only just disabled
IRQs and it does not materially affect the test conditions in
between.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sat, 27 Jun 2009 02:22:37 +0000 (19:22 -0700)]
inet: Call skb_orphan before tproxy activates
As transparent proxying looks up the socket early and assigns
it to the skb for later processing, we must drop any existing
socket ownership prior to that in order to distinguish between
the case where tproxy is active and where it is not.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
The mac80211 module uses rcu_call() thus it should use rcu_barrier()
on module unload.
The rcu_barrier() is placed in mech.c ieee80211_stop_mesh() which is
invoked from ieee80211_stop() in case vif.type == NL80211_IFTYPE_MESH_POINT.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
The sunrpc module uses rcu_call() thus it should use rcu_barrier() on
module unload.
Have not verified that the possibility for new call_rcu() callbacks
has been disabled. As a hint for checking, the functions calling
call_rcu() (unx_destroy_cred and generic_destroy_cred) are
registered as crdestroy function pointer in struct rpc_credops.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: Use rcu_barrier() instead of syncronize_net() on unload.
When unloading modules that uses call_rcu() callbacks, then we must
use rcu_barrier(). This module uses syncronize_net() which is not
enough to be sure that all callback has been completed.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
The ipv6 module uses rcu_call() thus it should use rcu_barrier() on
module unload.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
The decnet module unloading as been disabled with a '#if 0' statement,
because it have had issues.
We add a rcu_barrier() anyhow for correctness.
The maintainer (Chrissie Caulfield) will look into the unload issue
when time permits.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Chrissie Caulfield <christine.caulfield@googlemail.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
There are some devices in the wild that clear the DRQ bit during the
last word of a packet command and therefore could use a "second chance"
for that last word of data to be xferred instead of simply failing the
request. Do that by attempting to suck in those last bytes in PIO mode.
In addition, the ATA_ERR bit has to be cleared for we cannot be sure the
data is valid otherwise.
See http://bugzilla.kernel.org/show_bug.cgi?id=13399 for details.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 26 Jun 2009 16:39:40 +0000 (09:39 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: misc small cleanups
amd64_edac: fix ecc_enable_override handling
amd64_edac: check only ECC bit in amd64_determine_edac_cap
Linus Torvalds [Fri, 26 Jun 2009 16:39:02 +0000 (09:39 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
powerpc/rtas: Fix watchdog driver temperature read functionality
powerpc/mm: Fix potential access to freed pages when using hugetlbfs
powerpc/440: Fix warning early debug code
powerpc/of: Fix usage of dev_set_name() in of_device_alloc()
powerpc/pasemi: Use raw spinlock in SMP TB sync
powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
powerpc/rtas: Turn rtas lock into a raw spinlock
powerpc: Add irqtrace support for 32-bit powerpc
powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
powerpc/BSR: add 4096 byte BSR size
powerpc: Map more memory early on 601 processors
powerpc/pmac: Fix DMA ops for MacIO devices
powerpc/mm: Make k(un)map_atomic out of line
powerpc: Fix mpic alloc warning
powerpc: Fix output from show_regs
powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
powerpc/amigaone: Limit ISA I/O range to 4k in the device tree
powerpc/warp: Platform fix for i2c change
powerpc: Have git ignore generated files from dtc compile
powerpc/mpic: Fix mapping of "DCR" based MPIC variants
...
Linus Torvalds [Fri, 26 Jun 2009 16:37:52 +0000 (09:37 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: video: prevent NULL deref in acpi_get_pci_dev()
eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go
eeepc-laptop: get the right value for CMSG
eeepc-laptop: makes get_acpi() returns -ENODEV
eeepc-laptop: right parent device
eeepc-laptop: rfkill refactoring
eeepc-laptop.c: use pr_fmt and pr_<level>
eeepc-laptop: Register as a pci-hotplug device
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] remove unknown mount option warning message
[CIFS] remove bkl usage from umount begin
cifs: Fix incorrect return code being printed in cFYI messages
[CIFS] cleanup asn handling for ntlmssp
[CIFS] Copy struct *after* setting the port, instead of before.
cifs: remove rw/ro options
cifs: fix problems with earlier patches
cifs: have cifs parse scope_id out of IPv6 addresses and use it
[CIFS] Do not send tree disconnect if session is already disconnected
[CIFS] Fix build break
cifs: display scopeid in /proc/mounts
cifs: add new routine for converting AF_INET and AF_INET6 addrs
cifs: have cifs_show_options show forceuid/forcegid options
cifs: remove unneeded NULL checks from cifs_show_options
Borislav Petkov [Mon, 22 Jun 2009 17:42:24 +0000 (19:42 +0200)]
amd64_edac: fix ecc_enable_override handling
amd64_check_ecc_enabled() returns non-zero status when ECC
checking/correcting is disabled and this fails further loading of the
driver even when 'ecc_enable_override' boot param is used.
Borislav Petkov [Wed, 10 Jun 2009 16:29:54 +0000 (18:29 +0200)]
amd64_edac: check only ECC bit in amd64_determine_edac_cap
Checking whether the machine is using ECC enabled DRAM is done through
testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do
that instead of testing all bits from the DimmEccEn upwards.
Also, remove mci->edac_cap assignment and use value returned from
amd64_determine_edac_cap().
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq()
and ide_floppy_do_request() for failed requests.
[ bugfix part ]
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset()
and ide_complete_drive_reset(). Then remove ide_rq_bytes().
[ cleanup part ]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>