Ville Syrjälä [Fri, 13 Jun 2014 08:10:53 +0000 (11:10 +0300)]
drm/i915: Add locking around framebuffer_references--
obj->framebuffer_references isn't an atomic_t so the decrement needs to
be protected by some lock. struct_mutex seems like the appropriate lock
here, and we may already take it for the obj unref anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 12 Jun 2014 17:16:46 +0000 (10:16 -0700)]
drm/i915: PSR HSW: update after enabling sprite.
On the current structure HSW doesn't support PSR with sprites enabled
but sprites can be enabled after PSR was enabled what would cause
user to miss screen updates.
v2: move it to update_plane.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 12 Jun 2014 17:16:42 +0000 (10:16 -0700)]
drm/i915: BDW PSR: Add single frame update support.
When link is in stand by and PSR exit is triggered by a primary or sprite
plane flip this mode allows only one single updated frame to be send to
display than get back to PSR immediately.
Matt Roper [Tue, 10 Jun 2014 15:28:13 +0000 (08:28 -0700)]
drm/i915: Switch to unified plane cursor handling (v4)
The DRM core will translate calls to legacy cursor ioctls into universal
cursor calls automatically, so there's no need to maintain the legacy
cursor support. This greatly simplifies the transition since we don't
have to handle reference counting differently depending on which cursor
interface was called.
The aim here is to transition to the universal plane interface with
minimal code change. There's a lot of cleanup that can be done (e.g.,
using state stored in crtc->cursor->fb rather than intel_crtc) that is
left to future patches.
v4:
- Drop drm_gem_object_unreference() that is no longer needed now that
we receive the GEM obj directly rather than looking up the ID.
v3:
- Pass cursor obj to intel_crtc_cursor_set_obj() if cursor fb changes,
even if 'visible' is false. intel_crtc_cursor_set_obj() will notice
that the cursor isn't visible and disable it properly, but we still
need to get intel_crtc->cursor_addr set properly so that we behave
properly if the cursor becomes visible again in the future without
changing the cursor buffer (noted by Chris Wilson and verified
via i-g-t kms_cursor_crc).
- s/drm_plane_init/drm_universal_plane_init/. Due to type
compatibility between enum and bool, everything actually works
correctly with the wrong init call, except for the type of plane that
gets exposed to userspace (it shows up as type 'primary' rather than
type 'cursor').
v2:
- Remove duplicate dimension checks on cursor
- Drop explicit cursor disable from crtc destroy (fb & plane
destruction will take care of that now)
- Use DRM plane helper to check update parameters
Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Pallavi G<pallavi.g@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Tue, 10 Jun 2014 15:28:12 +0000 (08:28 -0700)]
drm/i915: Add intel_crtc_cursor_set_obj() to set cursor buffer (v2)
Refactor cursor buffer setting such that the code to actually update the
cursor lives in a new function, intel_crtc_cursor_set_obj(), and takes
a GEM object as a parameter. The existing legacy cursor ioctl handler,
intel_crtc_cursor_set() will now perform the userspace handle lookup and
then call this new function.
This refactoring is in preparation for the universal plane cursor
support where we'll want to update the cursor with an actual GEM buffer
object (obtained via drm_framebuffer) rather than a userspace handle.
v2: Drop obvious kerneldoc and replace with note about function's
reference consumption
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Pallavi G<pallavi.g@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Tue, 10 Jun 2014 15:28:11 +0000 (08:28 -0700)]
drm: Allow drivers to register cursor planes with crtc
Universal plane support had placeholders for cursor planes, but didn't
actually do anything with them. Save the cursor plane reference inside
the crtc and update the cursor plane parameter from void* to drm_plane.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Pallavi G<pallavi.g@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 13 Jun 2014 14:22:28 +0000 (15:22 +0100)]
drm: Avoid NULL deference when disabling a plane from userspace
To disable a plane, userspace passes in an framebuffer id of 0. This
causes us to pass CRTC == NULL to setplane_internal, who promptly
deferences it to grab the struct drm_device. Oops.
drm: Support legacy cursor ioctls via universal planes when possible (v4)
While at it move the plane parameter to the first position in
setplane_internal since that's the main object we're manipulating.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Pallavi G<pallavi.g@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[danvet: Add note about parameter reordering.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Tue, 10 Jun 2014 15:28:10 +0000 (08:28 -0700)]
drm: Support legacy cursor ioctls via universal planes when possible (v4)
If drivers support universal planes and have registered a cursor plane
with the DRM core, we should use that universal plane support when
handling legacy cursor ioctls. Drivers that transition to universal
planes won't have to maintain separate legacy ioctl handling; drivers
that don't transition to universal planes will continue to operate
without any change to behavior.
Note that there's a bit of a mismatch between the legacy cursor ioctls
and the universal plane API's --- legacy ioctl's use driver buffer
handles directly whereas the universal plane API takes drm_framebuffers.
Since there's no way to recover the driver handle from a
drm_framebuffer, we can implement legacy ioctl's in terms of universal
plane interfaces, but cannot implement universal plane interfaces in
terms of legacy ioctls. Specifically, there's no way to create a
general cursor helper in the way we previously created a primary plane
helper.
It's important to land this patch before any patches that add universal
cursor support to individual drivers so that drivers don't have to worry
about juggling two different styles of reference counting for cursor
buffers when userspace mixes and matches legacy and universal cursor
calls. With this patch, a driver that switches to universal cursor
support may assume that all cursor buffers are wrapped in a
drm_framebuffer and can rely on framebuffer reference counting for all
cursor operations.
v4:
- Add comments pointing out setplane_internal's reference-eating
semantics.
v3:
- Drop drm_mode_rmfb() call that is no longer needed now that we're
using setplane_internal(), which takes care of deref'ing the
appropriate framebuffer.
v2:
- Use new add_framebuffer_internal() function to create framebuffer
rather than trying to call directly into the ioctl interface and
look up the handle returned.
- Use new setplane_internal() function to update the cursor plane
rather than calling through the ioctl interface. Note that since
we're no longer looking up an fb_id, no extra reference will be
taken here.
- Grab extra reference to fb under lock in !BO case to avoid issues
where racing userspace could cause the fb to be destroyed out from
under us after we grab the fb pointer.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Pallavi G<pallavi.g@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Tue, 10 Jun 2014 15:28:09 +0000 (08:28 -0700)]
drm: Refactor setplane to allow internal use (v3)
Refactor DRM setplane code into a new setplane_internal() function that
takes DRM objects directly as parameters rather than looking them up by
ID. We'll use this in a future patch when we implement legacy cursor
ioctls on top of the universal plane interface.
v3:
- Move integer overflow checking from setplane_internal to setplane
ioctl. The upcoming legacy cursor support via universal planes needs
to maintain current cursor ioctl semantics and not return error for
these extreme values (found via intel-gpu-tools kms_cursor_crc test).
v2:
- Allow planes to be disabled without a valid crtc again (and add
mention of this to setplane's kerneldoc, since it doesn't seem to be
mentioned anywhere else).
- Reformat some parameter line wrap
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Pallavi G<pallavi.g@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Tue, 10 Jun 2014 15:28:08 +0000 (08:28 -0700)]
drm: Refactor framebuffer creation to allow internal use (v2)
Refactor DRM framebuffer creation into a new function that returns a
struct drm_framebuffer directly. The upcoming universal cursor support
will want to create framebuffers internally to wrap cursor buffers, so
we want to be able to share that framebuffer creation with the
drm_mode_addfb2 ioctl handler.
v2: Take struct drm_mode_fb_cmd2 parameter directly rather than void*
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Pallavi G<pallavi.g@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Wa*:chv belongs in cherryview_enable_rps, not gen8_enable_rps.
Signed-off-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 10 Jun 2014 11:14:40 +0000 (12:14 +0100)]
drm/i915: Prefault the entire object on first page fault
Inserting additional PTEs has no side-effect for us as the pfn are fixed
for the entire time the object is resident in the global GTT. The
downside is that we pay the entire cost of faulting the object upon the
first hit, for which we in return receive the benefit of removing the
per-page faulting overhead.
On an Ivybridge i7-3720qm with 1600MHz DDR3, with 32 fences,
Upload rate for 2 linear surfaces: 8127MiB/s -> 8134MiB/s
Upload rate for 2 tiled surfaces: 8607MiB/s -> 8625MiB/s
Upload rate for 4 linear surfaces: 8127MiB/s -> 8127MiB/s
Upload rate for 4 tiled surfaces: 8611MiB/s -> 8602MiB/s
Upload rate for 8 linear surfaces: 8114MiB/s -> 8124MiB/s
Upload rate for 8 tiled surfaces: 8601MiB/s -> 8603MiB/s
Upload rate for 16 linear surfaces: 8110MiB/s -> 8123MiB/s
Upload rate for 16 tiled surfaces: 8595MiB/s -> 8606MiB/s
Upload rate for 32 linear surfaces: 8104MiB/s -> 8121MiB/s
Upload rate for 32 tiled surfaces: 8589MiB/s -> 8605MiB/s
Upload rate for 64 linear surfaces: 8107MiB/s -> 8121MiB/s
Upload rate for 64 tiled surfaces: 2013MiB/s -> 3017MiB/s
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Goel, Akash" <akash.goel@intel.com>
Testcasee: igt/gem_fence_upload/performance Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Fri, 6 Jun 2014 09:59:39 +0000 (12:59 +0300)]
drm/i915: preserve user forcewake over system suspend/resume
Atm, the forcewake refcount will be incorrectly set to zero during
system suspend if there is any reference held via the
i915_forcewake_user debugfs entry.
Fix this by simply not zeroing the sw counters during suspend and
restoring the original state using them. Note that the only other
places where we zeroed the counters were driver load and unload time,
where it was redundant anyway.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78059 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Fri, 6 Jun 2014 11:04:37 +0000 (14:04 +0300)]
drm/i915: fix possible refcount leak when resetting forcewake
If the timer putting the last forcewake refcount was pending and we
canceled it, we'll leak the corresponding forcewake and RPM references.
v2:
- do the ptr casting at the caller instead of adding a separate helper
for this (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 5 Jun 2014 16:15:52 +0000 (19:15 +0300)]
drm/i915: Don't get hw state from DVO chip unless DVO is enabled
Certain DVO chips (ns2501 for example) don't like to be accessed unless
the PLL is running. Simply skip the DVO get_hw_state if the DVO port
is disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 5 Jun 2014 16:15:50 +0000 (19:15 +0300)]
drm/i915: Use named initializers for gmch wm params
Using names initializers when filling out the watermark structs
saves you from having go look up the struct definition every
single time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 6 Jun 2014 09:22:54 +0000 (10:22 +0100)]
drm/i915: Use the .release hook to drop the stolen drm_mm tracking
Now that we have a release hook into i915_gem_object_free, we can move
the explicit call to the internal stolen function and hook it up
throught the callback instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 6 Jun 2014 06:22:08 +0000 (08:22 +0200)]
drm/i915: Only wait one vblank when disabling crc if the pipe is on
Otherwise we incur an unsightly WARNING. The mutex locking is a bit
overkill, but it curbs races and eventially we might grow a locking
check in the vblank wait code to make sure the right crtc lock is
held.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79612 Tested-by: Guo Jinxian <jinxianx.guo@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Rebase on top of drm core ww locking changes.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Robert Beckett [Tue, 3 Jun 2014 08:08:26 +0000 (10:08 +0200)]
drm/i915: Simplify intel_gpu_reset
Replaced ever growing switch for gen version with chained conditionals.
Futre gen's only need to add a new one if they require something different.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Robert Beckett <robert.beckett@intel.com>
[danvet: Picked from internal tree and white-wash commit message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Pimp commit message as suggested by Damien] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 24 Apr 2014 21:55:42 +0000 (23:55 +0200)]
drm/i915: runtime PM support for DPMS
Keeping track of the power domains is a bit messy since crtc->active
is currently updated by the platform hooks, but we need to be aware of
which state transition exactly is going on. Maybe we simply need to
shovel all the power domain handling down into platform code to
simplify this. But doing that requires some more auditing since
currently the ->mode_set callbacks still read some random registers
(to e.g. figure out the reference clocks).
Also note that intel_crtc_update_dpms is always call first/last even
for encoders which have their own dpms functions. Hence we really only
need to update this place here.
Being a quick "does it blow up?" run not really tested yet.
v2: Don't do runtime PM in the DPMS hooks for HAS_DDI platforms since
that is stalled. Also add a comment to explain what's going on.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Mon, 2 Jun 2014 12:37:48 +0000 (18:07 +0530)]
drm/i915: Use transcoder as index to MIPI regs
Conceptually, the MIPI registers are addressed by the MIPI transcoder
index, not the pipe. It doesn't matter right now, because there's a
1:1 relationship between pipes and MIPI transcoders, but that change
allows us to break that link in the future
V1: Created new patch to address Damien's review comment.
Replacing _PIPE calls to _TRANSCODER calls
V2: Re-basing on patch 2
V3: Re-basing on patch 2
V4: Re-basing on patch 2
Shashank Sharma [Mon, 2 Jun 2014 12:37:47 +0000 (18:07 +0530)]
drm/i915: Change Mipi register definitions
Re-define MIPI register definitions in such a way that most of
the existing DSI code can be re-used for future platforms. Register
definitions are re-written using MMIO offset variable, so that without
changing the existing sequence, same code can be generically applied.
V4: Addressing review comments by Damien and Ville, splitting into two patches
This patch removes all the un-necessary formatting changes from previous patch.
V5: Removed 80 char limit formatting for existing MIPI regs
V6: Removed extra space, change one definition
David Herrmann [Sun, 25 May 2014 12:34:10 +0000 (14:34 +0200)]
drm/i915: use shmem helpers if possible
Instead of shuffling gfp-masks all the time, use the
shmem_read_mapping_page() helper. Note that __GFP_IO and __GFP_WAIT are
set in mapping_gfp_mask() for i915, so the behavior is still the same.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Intel hardware allows the primary plane to be disabled independently of
the CRTC. Provide custom primary plane handling to allow this.
v8:
- Pin/unpin properly when clipping causes the primary plane to be
disabled when it has previously been enabled.
- s/drm_primary_helper_check_update/drm_plane_helper_check_update/
v7:
- Clip primary plane to invisible when crtc is disabled since
intel_crtc->config.pipe_src_{w,h} may be garbage otherwise.
- Unpin old fb before pinning new one in the "just pin and
return" case that is used when the crtc is disabled.
- Don't treat implicit disabling of the primary plane (caused by
clipping) the same way as explicit disabling (caused by fb=0).
For implicit disables, we should leave the fb set and pinned,
whereas for explicit disables we need to unpin the fb before
primary->fb is cleared.
v6:
- Pass rectangles to primary helper check function and get plane
visibility back.
- Wait for pending pageflips on primary plane update/disable.
- Allow primary plane to be updated while the crtc is disabled (changes
will take effect when the crtc is re-enabled if modeset passes -1
for the fb id).
- Drop WARN() if we try to disable the primary plane when it's
already been disabled. This will happen if the crtc gets disabled
after the primary plane has already been disabled independently.
v5:
- Use new drm_primary_helper_check_update() helper function to check
setplane parameter validity.
- Swap primary plane's pipe for pre-gen4 FBC (caught by Ville Syrjälä)
- Cleanup primary plane properly on crtc init failure
v4:
- Don't add a primary_plane field to intel_crtc; that was left over
from a much earlier iteration of this patch series, but is no longer
needed/used now that the DRM core primary plane support has been
merged.
v3:
- Provide gen-specific primary plane format lists (suggested by Daniel
Vetter).
- If the primary plane is already enabled, go ahead and just call the
primary plane helper to do the update (suggested by Daniel Vetter).
- Don't try to disable the primary plane on destruction; the DRM layer
should have already taken care of this for us.
v2:
- Unpin fb properly on primary plane disable
- Provide an Intel-specific set of primary plane formats
- Additional sanity checks on setplane (in line with the checks
currently being done by the DRM core primary plane helper)
Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 29 May 2014 15:06:53 +0000 (08:06 -0700)]
drm/i915: don't force full modeset if primary plane is disabled (v2)
In a future patch, we'll allow the primary plane to be disabled by
userspace via the universal plane API. If a modeset is requested while
the primary plane is disabled, crtc->primary->fb will be NULL which
generally triggers a full modeset (except in fastboot situations). If
we detect that the crtc is active, but there's no primary plane fb,
we should still allow a simple plane update rather than a full modeset
if the mode isn't actually changing (after re-enabling the primary plane
of course).
v2:
- Enable plane after set_base to avoid enabling the plane if set_base
fails, and to make flip+enable atomic (suggested by Ville)
- Drop BUG to WARN if we somehow enter the 'fb_changed' modeset case
with the crtc disabled (suggested by Ville)
Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 29 May 2014 21:23:08 +0000 (23:23 +0200)]
drm/i915: Fix context locking in debugfs
This goes all the way back to the introduction of this debugfs file,
even though back then no locking really was required. None of the
intermediate patches fixed this.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Wed, 28 May 2014 11:30:56 +0000 (12:30 +0100)]
drm/i915: Make intel_dsi_init() return void
Functions that can't fail are such a bliss to work with, it'd be shame
to miss the occasion. The "failure" mode is the DSI connector not being
created, the rest of the initialization can carry on happily.
We weren't even checking that value anyway.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Shobhit Kumar <shobhit.kumar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Also convert the missed return statement due to other patches
merged meanwhile.]
[danvet2: Squash in fixup from Damien to remove empty return; at the
end of intel_dsi_init.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 9 Apr 2014 10:29:09 +0000 (13:29 +0300)]
drm/i915/chv: Handle video DIP registers on CHV
The DIP registers are a mess on VLV and CHV. The register block on pipe
A is different than the register block on pipes B and C. In order to
handle that using the pipe offsets, we'd need a new pipe offset per
register, which seems wasteful. So instead just use the _PIPE3() macro
to handle these registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 27 May 2014 13:32:55 +0000 (16:32 +0300)]
drm/i915/chv: Force PHY clock buffers off after PLL disable
Now that we forced the clock buffers on in .pre_pll_enable() we
should probably undo the damage after we've turned the PLL off.
We do the clock buffer force enable in the .pre_pll_enable() hook
as we need to know which port is going to be used, but in the disable
case we don't need the port since we just disable the clock buffers
to both channels. So we can do this in chv_disable_pll() instead
of having to add any kind of .post_pll_disable() hook.
v2: Improve the commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 27 May 2014 13:30:18 +0000 (16:30 +0300)]
drm/i915/chv: Force clock buffer enables
Try to force the PHY clock buffer enables to make the clock routing
work.
v2: Fix the pipe B case to actually enable CH0 clock buffers
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 9 Apr 2014 10:29:05 +0000 (13:29 +0300)]
drm/i915/chv: Try to program the PHY used clock channel overrides
These should make it possible to feed port C from pipe A or port B from
pipe B. Didn't quite seem to work though.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 23 May 2014 15:30:19 +0000 (21:00 +0530)]
drm/i915/chv: Skip gen6_gt_check_fifodbg() on CHV
CHV uses the gen8 shadow register mechanism so we shouldn't be
checking the GT FIFO status.
This effectively removes the posting read, so add an explicit
posting read using FORCEWAKE_ACK_VLV (which is what use in
vlv_forcewake_reset()).
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 23 May 2014 15:30:18 +0000 (21:00 +0530)]
drm/i915/chv: CHV doesn't need WaRsForcewakeWaitTC0
Skip __gen6_gt_wait_for_thread_c0() on CHV.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Tue, 27 May 2014 10:29:30 +0000 (15:59 +0530)]
drm/i915/chv: Enable RPS (Turbo) for Cherryview
v2: Disable media turbo and Add DOWN_IDLE_AVG support (Ville)
v3: Mass rename of the dev_priv->rps variables in upstream.
v4: Rebase against latest code. (Deepak)
v5: Rebase against latest nightly code. (Deepak)
v6: Rename the variables to match the spec (Mika)
v7: change min/max freq variable naming to match spec (Mika)
Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 22 May 2014 14:48:06 +0000 (17:48 +0300)]
drm/i915: Keep vblank interrupts enabled while enabling/disabling planes
Because of the upcoming vblank interrupt driven watermark update
mechanism we will have use for vblank interrupts during plane
enabling/disabling. So don't call drm_vblank_off() until planes
are off, and call drm_vblank_on() just before we start to enable
the planes.
v2: Pimp commit message (Paulo)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Fri, 23 May 2014 15:30:16 +0000 (21:00 +0530)]
drm/i915/chv: Added CHV specific register read and write and Streamline CHV forcewake stuff
Support to individually control Media/Render well based on the register access.
Add CHV specific write function to habdle difference between registers
that are sadowed vs those that need forcewake even for writes.
Streamline the CHV forcewake functions just like was done for VLV.
This will also fix a bug in accessing the common well registers,
where we'd end up trying to wake up the wells too many times
since we'd call force_wake_get/put twice per register access, with
FORCEFAKE_ALL both times.
v2: Drop write FIFO for CHV and add comman well forcewake (Ville)
Re-factor CHV/VLV Forcewake offsets (Ben)
v3: Fix for decrementing fw count in chv read/write. (Deepak)
v4: Squash the patches (Mika)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[vsyrjala: Move the register range macros into intel_uncore.c] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Fri, 23 May 2014 15:30:15 +0000 (21:00 +0530)]
drm/i915/chv: Enable Render Standby (RC6) for Cherryview
v2: Configure PCBR if BIOS fails allocate pcbr (deepak)
v3: Fix PCBR condition check during CHV RC6 Enable flag set
v4: Fixup PCBR comment msg. (Chris)
Rebase against latest code (Deak)
Fixup Spurious hunk (Ben)
v5: Fix PCBR and commentis msg (mika)
v6: Rebase patch on latest nightly (Deepak)
Signed-off-by: Deepak S <deepak.s@linux.intel.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Fri, 23 May 2014 20:45:51 +0000 (13:45 -0700)]
drm/i915: move psr_setup_done to psr struct
"Because our driver assumes only one panel is PSR capable, and we
already have other PSR information on dev_priv instead of intel_dp. If
we ever support multiple PSR panels, we'll have to move struct
i915_psr to intel_dp anyway." (by Paulo)
v2: Avoid more than one setup. Removing initialization
and trusting allocation. (By Paulo Zanoni).
v3: rebase.
v4: Adding comment.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Wed, 11 Jun 2014 06:28:10 +0000 (16:28 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
display rework fixes lots of displayport issues.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (43 commits)
drm/nouveau/disp/dp: fix tmds passthrough on dp connector
drm/nouveau/dp: probe dpcd to determine connectedness
drm/nv50-: trigger update after all connectors disabled
drm/nv50-: prepare for attaching a SOR to multiple heads
drm/gf119-/disp: fix debug output on update failure
drm/nouveau/disp/dp: make use of postcursor when its available
drm/g94-/disp/dp: take max pullup value across all lanes
drm/nouveau/bios/dp: parse lane postcursor data
drm/nouveau/dp: fix support for dpms
drm/nouveau: register a drm_dp_aux channel for each dp connector
drm/g94-/disp: add method to power-off dp lanes
drm/nouveau/disp/dp: maintain link in response to hpd signal
drm/g94-/disp: bash and wait for something after changing lane power regs
drm/nouveau/disp/dp: split link config/power into two steps
drm/nv50/disp: train PIOR-attached DP from second supervisor
drm/nouveau/disp/dp: make use of existing output data for link training
drm/gf119/disp: start removing direct vbios parsing from supervisor
drm/nv50/disp: start removing direct vbios parsing from supervisor
drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
drm/nouveau/disp/dp: create subclass for dp outputs
...
Ben Skeggs [Fri, 30 May 2014 15:48:06 +0000 (01:48 +1000)]
drm/nouveau/dp: fix support for dpms
SOR_PWR has no effect to power-off DP links, unlike other SOR protocols.
Instead, on the source side, we cut power to the lanes after having put
the sink into D3. Link training takes care of everything required to
bring it back again.
Ben Skeggs [Tue, 20 May 2014 00:18:03 +0000 (10:18 +1000)]
drm/nouveau/disp/dp: maintain link in response to hpd signal
This previously worked for the most part due to userspace doing a
modeset in response to HPD interrupts. This will allow us to
properly handle cases where sync is lost for other reasons, or if
userspace isn't caring.
Ben Skeggs [Fri, 16 May 2014 04:36:15 +0000 (14:36 +1000)]
drm/nouveau/disp: add internal representaion of output paths and connectors
This will, at some point, be used to replace various bits and pieces of
code doing direct bios parsing. For now, it'll just be used for some
DP improvements.
Ben Skeggs [Thu, 29 May 2014 01:07:16 +0000 (11:07 +1000)]
drm/nouveau/i2c: balance port acquire/release
This was a half-finished hack before, just enough to handle the shared
aux/i2c pad thing on G94 and up.
We got lucky with locking etc up until now, as this was (generally) all
protected by the DRM mode_config lock. It's about to become a lot more
likely to hit the races.
projects / linux-beck.git / log