Linus Torvalds [Thu, 15 Dec 2016 01:25:18 +0000 (17:25 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- a few misc things
- kexec updates
- DMA-mapping updates to better support networking DMA operations
- IPC updates
- various MM changes to improve DAX fault handling
- lots of radix-tree changes, mainly to the test suite. All leading up
to reimplementing the IDA/IDR code to be a wrapper layer over the
radix-tree. However the final trigger-pulling patch is held off for
4.11.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
radix tree test suite: delete unused rcupdate.c
radix tree test suite: add new tag check
radix-tree: ensure counts are initialised
radix tree test suite: cache recently freed objects
radix tree test suite: add some more functionality
idr: reduce the number of bits per level from 8 to 6
rxrpc: abstract away knowledge of IDR internals
tpm: use idr_find(), not idr_find_slowpath()
idr: add ida_is_empty
radix tree test suite: check multiorder iteration
radix-tree: fix replacement for multiorder entries
radix-tree: add radix_tree_split_preload()
radix-tree: add radix_tree_split
radix-tree: add radix_tree_join
radix-tree: delete radix_tree_range_tag_if_tagged()
radix-tree: delete radix_tree_locate_item()
radix-tree: improve multiorder iterators
btrfs: fix race in btrfs_free_dummy_fs_info()
radix-tree: improve dump output
radix-tree: make radix_tree_find_next_bit more useful
...
Linus Torvalds [Thu, 15 Dec 2016 01:21:53 +0000 (17:21 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block IO fixes from Jens Axboe:
"A few fixes that I collected as post-merge.
I was going to wait a bit with sending this out, but the O_DIRECT fix
should really go in sooner rather than later"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: Fix failed allocation path when mapping queues
blk-mq: Avoid memory reclaim when remapping queues
block_dev: don't update file access position for sync direct IO
nvme/pci: Log PCI_STATUS when the controller dies
block_dev: don't test bdev->bd_contains when it is not stable
Linus Torvalds [Thu, 15 Dec 2016 01:09:00 +0000 (17:09 -0800)]
Merge branch 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-block
Pull fs meta data unmap optimization from Jens Axboe:
"A series from Jan Kara, providing a more efficient way for unmapping
meta data from in the buffer cache than doing it block-by-block.
Provide a general helper that existing callers can use"
* 'for-4.10/fs-unmap' of git://git.kernel.dk/linux-block:
fs: Remove unmap_underlying_metadata
fs: Add helper to clean bdev aliases under a bh and use it
ext2: Use clean_bdev_aliases() instead of iteration
ext4: Use clean_bdev_aliases() instead of iteration
direct-io: Use clean_bdev_aliases() instead of handmade iteration
fs: Provide function to unmap metadata for a range of blocks
Linus Torvalds [Thu, 15 Dec 2016 00:30:12 +0000 (16:30 -0800)]
docs: add back 'Documentation/Changes' file (as symlink)
Jaegeuk Kim reports that the debian kernel package build gets confused
by the lack of Documentation/Changes file. We also refer to that path
name in ver_linux and various how-to files and Kconfig files.
The file got renamed away in commit 186128f75392 ("docs-rst: add
documents to development-process"), and as Jaegeuk Kim points out, the
commit message for that change says "use symlinks instead of renames",
but then the commit itself actually does renames after all.
Maybe we should do the other files too, but for now this just adds the
minimal symlink back to the historical name, so that people looking for
Documentation/Changes will actually find what they are looking for, and
the debian scripts continue to work.
Matthew Wilcox [Wed, 14 Dec 2016 23:09:36 +0000 (15:09 -0800)]
radix tree test suite: delete unused rcupdate.c
This file was used to implement call_rcu() before liburcu implemented
that function. It hasn't even been compiled since before the test suite
was added to the kernel. Remove it to reduce confusion.
Link: http://lkml.kernel.org/r/1481667692-14500-5-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:34 +0000 (15:09 -0800)]
radix tree test suite: add new tag check
We have a check that setting a tag on a single entry at root succeeds,
but we were missing a check that clearing a tag on that same entry also
succeeds.
Link: http://lkml.kernel.org/r/1481667692-14500-4-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:31 +0000 (15:09 -0800)]
radix-tree: ensure counts are initialised
radix_tree_join() was freeing nodes with a non-zero ->exceptional count,
and radix_tree_split() wasn't zeroing ->exceptional when it allocated
the new node. Fix this by making all callers of radix_tree_node_alloc()
pass in the new counts (and some other always-initialised fields), which
will prevent the problem recurring if in future we decide to do
something similar.
Link: http://lkml.kernel.org/r/1481667692-14500-3-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:28 +0000 (15:09 -0800)]
radix tree test suite: cache recently freed objects
The kmem_cache_alloc implementation simply allocates new memory from
malloc() and calls the ctor, which zeroes out the entire object. This
means it cannot spot bugs where the object isn't properly reinitialised
before being freed.
Add a small (11 objects) cache before freeing objects back to malloc.
This is enough to let us write a test to catch it, although the memory
allocator is now aware of the structure of the radix tree node, since it
chains free objects through ->private_data (like the percpu cache does).
Link: http://lkml.kernel.org/r/1481667692-14500-2-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:22 +0000 (15:09 -0800)]
idr: reduce the number of bits per level from 8 to 6
In preparation for merging the IDR and radix tree, reduce the fanout at
each level from 256 to 64. If this causes a performance problem then a
bisect will point to this commit, and we'll have a better idea about
what we might do to fix it.
Link: http://lkml.kernel.org/r/1480369871-5271-66-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:19 +0000 (15:09 -0800)]
rxrpc: abstract away knowledge of IDR internals
Add idr_get_cursor() / idr_set_cursor() APIs, and remove the reference
to IDR_SIZE.
Link: http://lkml.kernel.org/r/1480369871-5271-65-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:16 +0000 (15:09 -0800)]
tpm: use idr_find(), not idr_find_slowpath()
idr_find_slowpath() is not intended to be part of the public API, it's
an implementation detail. There's no reason to skip straight to the
slowpath here.
Link: http://lkml.kernel.org/r/1480369871-5271-64-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:10 +0000 (15:09 -0800)]
radix tree test suite: check multiorder iteration
The random iteration test only inserts order-0 entries currently.
Update it to insert entries of order between 7 and 0. Also make the
maximum index configurable, make some variables static, make the test
duration variable, remove some useless spinning, and add a fifth thread
which calls tag_tagged_items().
Link: http://lkml.kernel.org/r/1480369871-5271-62-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:07 +0000 (15:09 -0800)]
radix-tree: fix replacement for multiorder entries
When replacing an entry with NULL, we need to delete any sibling
entries. Also account deleting exceptional entries properly. Also fix
a bug with radix_tree_iter_replace() where we would fail to remove
entirely freed nodes. Also fix accounting bug when switching between
normal and exceptional entries with replace_slot. Also add testcases
for all these bugs.
Link: http://lkml.kernel.org/r/1480369871-5271-61-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:04 +0000 (15:09 -0800)]
radix-tree: add radix_tree_split_preload()
Calculate how many nodes we need to allocate to split an old_order entry
into multiple entries, each of size new_order. The test suite checks
that we allocated exactly the right number of nodes; neither too many
(checked by rtp->nr == 0), nor too few (checked by comparing
nr_allocated before and after the call to radix_tree_split()).
Link: http://lkml.kernel.org/r/1480369871-5271-60-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:09:01 +0000 (15:09 -0800)]
radix-tree: add radix_tree_split
This new function splits a larger multiorder entry into smaller entries
(potentially multi-order entries). These entries are initialised to
RADIX_TREE_RETRY to ensure that RCU walkers who see this state aren't
confused. The caller should then call radix_tree_for_each_slot() and
radix_tree_replace_slot() in order to turn these retry entries into the
intended new entries. Tags are replicated from the original multiorder
entry into each new entry.
Link: http://lkml.kernel.org/r/1480369871-5271-59-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:58 +0000 (15:08 -0800)]
radix-tree: add radix_tree_join
This new function allows for the replacement of many smaller entries in
the radix tree with one larger multiorder entry. From the point of view
of an RCU walker, they may see a mixture of the smaller entries and the
large entry during the same walk, but they will never see NULL for an
index which was populated before the join.
Link: http://lkml.kernel.org/r/1480369871-5271-58-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is an exceptionally complicated function with just one caller
(tag_pages_for_writeback). We devote a large portion of the runtime of
the test suite to testing this one function which has one caller. By
introducing the new function radix_tree_iter_tag_set(), we can eliminate
all of the complexity while keeping the performance. The caller can now
use a fairly standard radix_tree_for_each() loop, and it doesn't need to
worry about tricksy things like 'start' wrapping.
The test suite continues to spend a large amount of time investigating
this function, but now it's testing the underlying primitives such as
radix_tree_iter_resume() and the radix_tree_for_each_tagged() iterator
which are also used by other parts of the kernel.
Link: http://lkml.kernel.org/r/1480369871-5271-57-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:52 +0000 (15:08 -0800)]
radix-tree: delete radix_tree_locate_item()
This rather complicated function can be better implemented as an
iterator. It has only one caller, so move the functionality to the only
place that needs it. Update the test suite to follow the same pattern.
Link: http://lkml.kernel.org/r/1480369871-5271-56-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:49 +0000 (15:08 -0800)]
radix-tree: improve multiorder iterators
This fixes several interlinked problems with the iterators in the
presence of multiorder entries.
1. radix_tree_iter_next() would only advance by one slot, which would
result in the iterators returning the same entry more than once if
there were sibling entries.
2. radix_tree_next_slot() could return an internal pointer instead of
a user pointer if a tagged multiorder entry was immediately followed by
an entry of lower order.
3. radix_tree_next_slot() expanded to a lot more code than it used to
when multiorder support was compiled in. And I wasn't comfortable with
entry_to_node() being in a header file.
Fixing radix_tree_iter_next() for the presence of sibling entries
necessarily involves examining the contents of the radix tree, so we now
need to pass 'slot' to radix_tree_iter_next(), and we need to change the
calling convention so it is called *before* dropping the lock which
protects the tree. Also rename it to radix_tree_iter_resume(), as some
people thought it was necessary to call radix_tree_iter_next() each time
around the loop.
radix_tree_next_slot() becomes closer to how it looked before multiorder
support was introduced. It only checks to see if the next entry in the
chunk is a sibling entry or a pointer to a node; this should be rare
enough that handling this case out of line is not a performance impact
(and such impact is amortised by the fact that the entry we just
processed was a multiorder entry). Also, radix_tree_next_slot() used to
force a new chunk lookup for untagged entries, which is more expensive
than the out of line sibling entry skipping.
Link: http://lkml.kernel.org/r/1480369871-5271-55-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:46 +0000 (15:08 -0800)]
btrfs: fix race in btrfs_free_dummy_fs_info()
We drop the lock which protects the radix tree, so we must call
radix_tree_iter_next() in order to avoid a modification to the tree
invalidating the iterator state.
Link: http://lkml.kernel.org/r/1480369871-5271-54-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:43 +0000 (15:08 -0800)]
radix-tree: improve dump output
Print the indices of the entries as unsigned (instead of signed)
integers and print the parent node of each entry to help navigate around
larger trees where the layout is not quite so obvious. Print the
indices covered by a node. Rearrange the order of fields printed so the
indices and parents line up for each type of entry.
Link: http://lkml.kernel.org/r/1480369871-5271-53-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:40 +0000 (15:08 -0800)]
radix-tree: make radix_tree_find_next_bit more useful
Since this function is specialised to the radix tree, pass in the node
and tag to calculate the address of the bitmap in
radix_tree_find_next_bit() instead of the caller. Likewise, there is no
need to pass in the size of the bitmap.
Link: http://lkml.kernel.org/r/1480369871-5271-52-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:34 +0000 (15:08 -0800)]
radix-tree: move rcu_head into a union with private_list
I want to be able to reference node->parent after freeing node.
Currently node->parent is in a union with rcu_head, so it is overwritten
when the node is put on the RCU list. We know that private_list is not
referenced after the node is freed, so it is safe for these two members
to share space.
Link: http://lkml.kernel.org/r/1480369871-5271-50-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:31 +0000 (15:08 -0800)]
radix-tree: fix typo
Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:26 +0000 (15:08 -0800)]
tools: add more bitmap functions
I need the following functions for the radix tree:
bitmap_fill
bitmap_empty
bitmap_full
Copy the implementations from include/linux/bitmap.h
Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:23 +0000 (15:08 -0800)]
radix tree test suite: record order in each item
This probably doubles the size of each item allocated by the test suite
but it lets us check a few more things, and may be needed for upcoming
API changes that require the caller pass in the order of the entry.
Link: http://lkml.kernel.org/r/1480369871-5271-46-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:20 +0000 (15:08 -0800)]
radix tree test suite: handle exceptional entries
item_kill_tree() assumes that everything in the tree is a pointer to a
struct item, which is annoying when testing the behaviour of exceptional
entries. Fix it to delete exceptional entries on the assumption they
don't need to be freed.
Link: http://lkml.kernel.org/r/1480369871-5271-45-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:17 +0000 (15:08 -0800)]
radix tree test suite: use rcu_barrier
Calling rcu_barrier() allows all of the rcu-freed memory to be actually
returned to the pool, and allows nr_allocated to return to 0. As well
as allowing diffs between runs to be more useful, it also lets us
pinpoint leaks more effectively.
Link: http://lkml.kernel.org/r/1480369871-5271-44-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:11 +0000 (15:08 -0800)]
radix tree test suite: iteration test misuses RCU
Each thread needs to register itself with RCU, otherwise the reading
thread's read lock has no effect and the freeing thread will free the
memory in the tree without waiting for the read lock to be dropped.
Link: http://lkml.kernel.org/r/1480369871-5271-42-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:08 +0000 (15:08 -0800)]
radix tree test suite: make runs more reproducible
Instead of reseeding the random number generator every time around the
loop in big_gang_check(), seed it at the beginning of execution. Use
rand_r() and an independent base seed for each thread in
iteration_test() so they don't stomp all over each others state. Since
this particular test depends on the kernel scheduler, the iteration test
can't be reproduced based purely on the random seed, but at least it
won't pollute the other tests.
Print the seed, and allow the seed to be specified so that a run which
hits a problem can be reproduced.
Link: http://lkml.kernel.org/r/1480369871-5271-41-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:05 +0000 (15:08 -0800)]
radix tree test suite: free preallocated nodes
It can be a source of mild concern when the test suite shows that we're
leaking nodes. While poring over the source code looking for leaks can
lead to some fascinating bugs being discovered, sometimes the leak is
simply that these nodes were preallocated and are sitting on the per-CPU
list. Free them by calling the CPU dead callback.
Link: http://lkml.kernel.org/r/1480369871-5271-40-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:08:02 +0000 (15:08 -0800)]
radix tree test suite: track preempt_count
Rather than simply NOP out preempt_enable() and preempt_disable(), keep
track of preempt_count and display it regularly in case either the test
suite or the code under test is forgetting to balance the enables &
disables. Only found a test-case that was forgetting to re-enable
preemption, but it's a possibility worth checking.
Link: http://lkml.kernel.org/r/1480369871-5271-39-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@infradead.org> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Wed, 14 Dec 2016 23:07:59 +0000 (15:07 -0800)]
radix tree test suite: allow GFP_ATOMIC allocations to fail
In order to test the preload code, it is necessary to fail GFP_ATOMIC
allocations, which requires defining GFP_KERNEL and GFP_ATOMIC properly.
Remove the obsolete __GFP_WAIT and copy the definitions of the __GFP
flags which are used from the kernel include files. We also need the
real definition of gfpflags_allow_blocking() to persuade the radix tree
to actually use its preallocated nodes.
Link: http://lkml.kernel.org/r/1480369871-5271-38-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:53 +0000 (15:07 -0800)]
dax: clear dirty entry tags on cache flush
Currently we never clear dirty tags in DAX mappings and thus address
ranges to flush accumulate. Now that we have locking of radix tree
entries, we have all the locking necessary to reliably clear the radix
tree dirty tag when flushing caches for corresponding address range.
Similarly to page_mkclean() we also have to write-protect pages to get a
page fault when the page is next written to so that we can mark the
entry dirty again.
Link: http://lkml.kernel.org/r/1479460644-25076-21-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:50 +0000 (15:07 -0800)]
dax: protect PTE modification on WP fault by radix tree entry lock
Currently PTE gets updated in wp_pfn_shared() after dax_pfn_mkwrite()
has released corresponding radix tree entry lock. When we want to
writeprotect PTE on cache flush, we need PTE modification to happen
under radix tree entry lock to ensure consistent updates of PTE and
radix tree (standard faults use page lock to ensure this consistency).
So move update of PTE bit into dax_pfn_mkwrite().
Link: http://lkml.kernel.org/r/1479460644-25076-20-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:47 +0000 (15:07 -0800)]
dax: make cache flushing protected by entry lock
Currently, flushing of caches for DAX mappings was ignoring entry lock.
So far this was ok (modulo a bug that a difference in entry lock could
cause cache flushing to be mistakenly skipped) but in the following
patches we will write-protect PTEs on cache flushing and clear dirty
tags. For that we will need more exclusion. So do cache flushing under
an entry lock. This allows us to remove one lock-unlock pair of
mapping->tree_lock as a bonus.
Link: http://lkml.kernel.org/r/1479460644-25076-19-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:45 +0000 (15:07 -0800)]
mm: export follow_pte()
DAX will need to implement its own version of page_check_address(). To
avoid duplicating page table walking code, export follow_pte() which
does what we need.
Link: http://lkml.kernel.org/r/1479460644-25076-18-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:42 +0000 (15:07 -0800)]
mm: change return values of finish_mkwrite_fault()
Currently finish_mkwrite_fault() returns 0 when PTE got changed before
we acquired PTE lock and VM_FAULT_WRITE when we succeeded in modifying
the PTE. This is somewhat confusing since 0 generally means success, it
is also inconsistent with finish_fault() which returns 0 on success.
Change finish_mkwrite_fault() to return 0 on success and VM_FAULT_NOPAGE
when PTE changed. Practically, there should be no behavioral difference
since we bail out from the fault the same way regardless whether we
return 0, VM_FAULT_NOPAGE, or VM_FAULT_WRITE. Also note that
VM_FAULT_WRITE has no effect for shared mappings since the only two
places that check it - KSM and GUP - care about private mappings only.
Generally the meaning of VM_FAULT_WRITE for shared mappings is not well
defined and we should probably clean that up.
Link: http://lkml.kernel.org/r/1479460644-25076-17-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:39 +0000 (15:07 -0800)]
mm: provide helper for finishing mkwrite faults
Provide a helper function for finishing write faults due to PTE being
read-only. The helper will be used by DAX to avoid the need of
complicating generic MM code with DAX locking specifics.
Link: http://lkml.kernel.org/r/1479460644-25076-16-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:36 +0000 (15:07 -0800)]
mm: move part of wp_page_reuse() into the single call site
wp_page_reuse() handles write shared faults which is needed only in
wp_page_shared(). Move the handling only into that location to make
wp_page_reuse() simpler and avoid a strange situation when we sometimes
pass in locked page, sometimes unlocked etc.
Link: http://lkml.kernel.org/r/1479460644-25076-15-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:33 +0000 (15:07 -0800)]
mm: use vmf->page during WP faults
So far we set vmf->page during WP faults only when we needed to pass it
to the ->page_mkwrite handler. Set it in all the cases now and use that
instead of passing page pointer explicitly around.
Link: http://lkml.kernel.org/r/1479460644-25076-14-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:30 +0000 (15:07 -0800)]
mm: pass vm_fault structure into do_page_mkwrite()
We will need more information in the ->page_mkwrite() helper for DAX to
be able to fully finish faults there. Pass vm_fault structure to
do_page_mkwrite() and use it there so that information propagates
properly from upper layers.
Link: http://lkml.kernel.org/r/1479460644-25076-13-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:27 +0000 (15:07 -0800)]
mm: factor out common parts of write fault handling
Currently we duplicate handling of shared write faults in
wp_page_reuse() and do_shared_fault(). Factor them out into a common
function.
Link: http://lkml.kernel.org/r/1479460644-25076-12-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:24 +0000 (15:07 -0800)]
mm: move handling of COW faults into DAX code
Move final handling of COW faults from generic code into DAX fault
handler. That way generic code doesn't have to be aware of
peculiarities of DAX locking so remove that knowledge and make locking
functions private to fs/dax.c.
Link: http://lkml.kernel.org/r/1479460644-25076-11-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:21 +0000 (15:07 -0800)]
mm: factor out functionality to finish page faults
Introduce finish_fault() as a helper function for finishing page faults.
It is rather thin wrapper around alloc_set_pte() but since we'd want to
call this from DAX code or filesystems, it is still useful to avoid some
boilerplate code.
Link: http://lkml.kernel.org/r/1479460644-25076-10-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:18 +0000 (15:07 -0800)]
mm: allow full handling of COW faults in ->fault handlers
Patch series "dax: Clear dirty bits after flushing caches", v5.
Patchset to clear dirty bits from radix tree of DAX inodes when caches
for corresponding pfns have been flushed. In principle, these patches
enable handlers to easily update PTEs and do other work necessary to
finish the fault without duplicating the functionality present in the
generic code. I'd like to thank Kirill and Ross for reviews of the
series!
This patch (of 20):
To allow full handling of COW faults add memcg field to struct vm_fault
and a return value of ->fault() handler meaning that COW fault is fully
handled and memcg charge must not be canceled. This will allow us to
remove knowledge about special DAX locking from the generic fault code.
Link: http://lkml.kernel.org/r/1479460644-25076-9-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:16 +0000 (15:07 -0800)]
mm: add orig_pte field into vm_fault
Add orig_pte field to vm_fault structure to allow ->page_mkwrite
handlers to fully handle the fault.
This also allows us to save some passing of extra arguments around.
Link: http://lkml.kernel.org/r/1479460644-25076-8-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:13 +0000 (15:07 -0800)]
mm: use passed vm_fault structure for in wp_pfn_shared()
Instead of creating another vm_fault structure, use the one passed to
wp_pfn_shared() for passing arguments into pfn_mkwrite handler.
Link: http://lkml.kernel.org/r/1479460644-25076-7-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:10 +0000 (15:07 -0800)]
mm: trim __do_fault() arguments
Use vm_fault structure to pass cow_page, page, and entry in and out of
the function.
That reduces number of __do_fault() arguments from 4 to 1.
Link: http://lkml.kernel.org/r/1479460644-25076-6-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:07 +0000 (15:07 -0800)]
mm: use passed vm_fault structure in __do_fault()
Instead of creating another vm_fault structure, use the one passed to
__do_fault() for passing arguments into fault handler.
Link: http://lkml.kernel.org/r/1479460644-25076-5-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:04 +0000 (15:07 -0800)]
mm: use pgoff in struct vm_fault instead of passing it separately
struct vm_fault has already pgoff entry. Use it instead of passing
pgoff as a separate argument and then assigning it later.
Link: http://lkml.kernel.org/r/1479460644-25076-4-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:07:01 +0000 (15:07 -0800)]
mm: use vmf->address instead of of vmf->virtual_address
Every single user of vmf->virtual_address typed that entry to unsigned
long before doing anything with it so the type of virtual_address does
not really provide us any additional safety. Just use masked
vmf->address which already has the appropriate type.
Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 14 Dec 2016 23:06:58 +0000 (15:06 -0800)]
mm: join struct fault_env and vm_fault
Currently we have two different structures for passing fault information
around - struct vm_fault and struct fault_env. DAX will need more
information in struct vm_fault to handle its faults so the content of
that structure would become event closer to fault_env. Furthermore it
would need to generate struct fault_env to be able to call some of the
generic functions. So at this point I don't think there's much use in
keeping these two structures separate. Just embed into struct vm_fault
all that is needed to use it for both purposes.
Link: http://lkml.kernel.org/r/1479460644-25076-2-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Wed, 14 Dec 2016 23:06:55 +0000 (15:06 -0800)]
mm: unexport __get_user_pages_unlocked()
Unexport the low-level __get_user_pages_unlocked() function and replaces
invocations with calls to more appropriate higher-level functions.
In hva_to_pfn_slow() we are able to replace __get_user_pages_unlocked()
with get_user_pages_unlocked() since we can now pass gup_flags.
In async_pf_execute() and process_vm_rw_single_vec() we need to pass
different tsk, mm arguments so get_user_pages_remote() is the sane
replacement in these cases (having added manual acquisition and release
of mmap_sem.)
Additionally get_user_pages_remote() reintroduces use of the FOLL_TOUCH
flag. However, this flag was originally silently dropped by commit 1e9877902dc7 ("mm/gup: Introduce get_user_pages_remote()"), so this
appears to have been unintentional and reintroducing it is therefore not
an issue.
[akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20161027095141.2569-3-lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lorenzo Stoakes [Wed, 14 Dec 2016 23:06:52 +0000 (15:06 -0800)]
mm: add locked parameter to get_user_pages_remote()
Patch series "mm: unexport __get_user_pages_unlocked()".
This patch series continues the cleanup of get_user_pages*() functions
taking advantage of the fact we can now pass gup_flags as we please.
It firstly adds an additional 'locked' parameter to
get_user_pages_remote() to allow for its callers to utilise
VM_FAULT_RETRY functionality. This is necessary as the invocation of
__get_user_pages_unlocked() in process_vm_rw_single_vec() makes use of
this and no other existing higher level function would allow it to do
so.
Secondly existing callers of __get_user_pages_unlocked() are replaced
with the appropriate higher-level replacement -
get_user_pages_unlocked() if the current task and memory descriptor are
referenced, or get_user_pages_remote() if other task/memory descriptors
are referenced (having acquiring mmap_sem.)
This patch (of 2):
Add a int *locked parameter to get_user_pages_remote() to allow
VM_FAULT_RETRY faulting behaviour similar to get_user_pages_[un]locked().
Taking into account the previous adjustments to get_user_pages*()
functions allowing for the passing of gup_flags, we are now in a
position where __get_user_pages_unlocked() need only be exported for his
ability to allow VM_FAULT_RETRY behaviour, this adjustment allows us to
subsequently unexport __get_user_pages_unlocked() as well as allowing
for future flexibility in the use of get_user_pages_remote().
[sfr@canb.auug.org.au: merge fix for get_user_pages_remote API change] Link: http://lkml.kernel.org/r/20161122210511.024ec341@canb.auug.org.au Link: http://lkml.kernel.org/r/20161027095141.2569-2-lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Wed, 14 Dec 2016 23:06:49 +0000 (15:06 -0800)]
ipc/sem: avoid idr tree lookup for interrupted semop
We can avoid the idr tree lookup (albeit possibly avoiding
idr_find_fast()) when being awoken in EINTR, as the semid will not
change in this context while blocked. Use the sma pointer directly and
take the sem_lock, then re-check for RMID races. We continue to
re-check the queue.status with the lock held such that we can detect
situations where we where are dealing with a spurious wakeup but another
task that holds the sem_lock updated the queue.status while we were
spinning for it. Once we take the lock it obviously won't change again.
Being the only caller, get rid of sem_obtain_lock() altogether.
Davidlohr Bueso [Wed, 14 Dec 2016 23:06:46 +0000 (15:06 -0800)]
ipc/sem: simplify wait-wake loop
Instead of using the reverse goto, we can simplify the flow and make it
more language natural by just doing do-while instead. One would hope
this is the standard way (or obviously just with a while bucle) that we
do wait/wakeup handling in the kernel. The exact same logic is kept,
just more indented.
Davidlohr Bueso [Wed, 14 Dec 2016 23:06:40 +0000 (15:06 -0800)]
ipc/sem: explicitly inline check_restart
The compiler already does this, but make it explicit. This helper is
really small and also used in update_queue's main loop, which is O(N^2)
scanning. Inline and avoid the function overhead.
Davidlohr Bueso [Wed, 14 Dec 2016 23:06:37 +0000 (15:06 -0800)]
ipc/sem: optimize perform_atomic_semop()
This is the main workhorse that deals with semop user calls such that
the waitforzero or semval update operations, on the set, can complete on
not as the sma currently stands. Currently, the set is iterated twice
(setting semval, then backwards for the sempid value). Slowpaths, and
particularly SEM_UNDO calls, must undo any altered sem when it is
detected that the caller must block or has errored-out.
With larger sets, there can occur situations where this involves a lot
of cycles and can obviously be a suboptimal use of cached resources in
shared memory. Ie, discarding CPU caches that are also calling semop
and have the sembuf cached (and can complete), while the current lock
holder doing the semop will block, error, or does a waitforzero
operation.
This patch proposes still iterating the set twice, but the first scan is
read-only, and we perform the actual updates afterward, once we know
that the call will succeed. In order to not suffer from the overhead of
dealing with sops that act on the same sem_num, such (rare) cases use
perform_atomic_semop_slow(), which is exactly what we have now.
Duplicates are detected before grabbing sem_lock, and uses simple a
32/64-bit hash array variable to based on the sem_num we are working on.
In addition add some comments to when we expect to the caller to block.
[akpm@linux-foundation.org: coding-style fixes]
[colin.king@canonical.com: ensure we left shift a ULL rather than a 32 bit integer] Link: http://lkml.kernel.org/r/20161028181129.7311-1-colin.king@canonical.com Link: http://lkml.kernel.org/r/20160921194603.GB21438@linux-80c1.suse Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Wed, 14 Dec 2016 23:06:34 +0000 (15:06 -0800)]
ipc/sem: rework task wakeups
Our sysv sems have been using the notion of lockless wakeups for a
while, ever since commit 0a2b9d4c7967 ("ipc/sem.c: move wake_up_process
out of the spinlock section"), in order to reduce the sem_lock hold
times. This in-house pending queue can be replaced by wake_q (just like
all the rest of ipc now), in that it provides the following advantages:
o Simplifies and gets rid of unnecessary code.
o We get rid of the IN_WAKEUP complexities. Given that wake_q_add()
grabs reference to the task, if awoken due to an unrelated event,
between the wake_q_add() and wake_up_q() window, we cannot race with
sys_exit and the imminent call to wake_up_process().
o By not spinning IN_WAKEUP, we no longer need to disable preemption.
In consequence, the wakeup paths (after schedule(), that is) must
acknowledge an external signal/event, as well spurious wakeup occurring
during the pending wakeup window. Obviously no changes in semantics
that could be visible to the user. The fastpath is _only_ for when we
know for sure that we were awoken due to a the waker's successful semop
call (queue.status is not -EINTR).
On a 48-core Haswell, running the ipcscale 'waitforzero' test, the
following is seen with increasing thread counts:
Davidlohr Bueso [Wed, 14 Dec 2016 23:06:31 +0000 (15:06 -0800)]
ipc/sem: do not call wake_sem_queue_do() prematurely ... as this call should obviously be paired with its _prepare()
counterpart. At least whenever possible, as there is no harm in calling
it bogusly as we do now in a few places. Immediate error semop(2) paths
that are far from ever having the task block can be simplified and avoid
a few unnecessary loads on their way out of the call as it is not deeply
nested.
Babu Moger [Wed, 14 Dec 2016 23:06:28 +0000 (15:06 -0800)]
sparc: implement watchdog_nmi_enable and watchdog_nmi_disable
Implement functions watchdog_nmi_enable and watchdog_nmi_disable to
enable/disable nmi watchdog. Sparc uses arch specific nmi watchdog
handler. Currently, we do not have a way to enable/disable nmi watchdog
dynamically. With these patches we can enable or disable arch specific
nmi watchdogs using proc or sysctl interface.
Example commands.
To enable: echo 1 > /proc/sys/kernel/nmi_watchdog
To disable: echo 0 > /proc/sys/kernel/nmi_watchdog
It can also achieved using the sysctl parameter kernel.nmi_watchdog
Babu Moger [Wed, 14 Dec 2016 23:06:24 +0000 (15:06 -0800)]
kernel/watchdog.c: move hardlockup detector to separate file
Separate hardlockup code from watchdog.c and move it to watchdog_hld.c.
It is mostly straight forward. Remove everything inside
CONFIG_HARDLOCKUP_DETECTORS. This code will go to file watchdog_hld.c.
Also update the makefile accordigly.
Babu Moger [Wed, 14 Dec 2016 23:06:21 +0000 (15:06 -0800)]
kernel/watchdog.c: move shared definitions to nmi.h
Patch series "Clean up watchdog handlers", v2.
This is an attempt to cleanup watchdog handlers. Right now,
kernel/watchdog.c implements both softlockup and hardlockup detectors.
Softlockup code is generic. Hardlockup code is arch specific. Some
architectures don't use hardlockup detectors. They use their own
watchdog detectors. To make both these combination work, we have
numerous #ifdefs in kernel/watchdog.c.
We are trying here to make these handlers independent of each other.
Also provide an interface for architectures to implement their own
handlers. watchdog_nmi_enable and watchdog_nmi_disable will be defined
as weak such that architectures can override its definitions.
Thanks to Don Zickus for his suggestions.
Here are our previous discussions
http://www.spinics.net/lists/sparclinux/msg16543.html
http://www.spinics.net/lists/sparclinux/msg16441.html
This patch (of 3):
Move shared macros and definitions to nmi.h so that watchdog.c, new file
watchdog_hld.c or any other architecture specific handler can use those
definitions.
Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Pitre [Wed, 14 Dec 2016 23:06:13 +0000 (15:06 -0800)]
posix-timers: give lazy compilers some help optimizing code away
The OpenRISC compiler (so far) fails to optimize away a large portion of
code containing a reference to posix_timer_event in alarmtimer.c when
CONFIG_POSIX_TIMERS is unset. Let's give it a direct clue to let the
build succeed.
This fixes
[linux-next:master 6682/7183] alarmtimer.c:undefined reference to `posix_timer_event'
reported by kbuild test robot.
Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shailesh Pandey [Wed, 14 Dec 2016 23:06:10 +0000 (15:06 -0800)]
ipc/shm.c: coding style fixes
This patch fixes below warnings:
WARNING: Missing a blank line after declarations
WARNING: Block comments use a trailing */ on a separate line
ERROR: spaces required around that '=' (ctx:WxV)
Jiri Slaby [Wed, 14 Dec 2016 23:06:07 +0000 (15:06 -0800)]
ipc: msg, make msgrcv work with LONG_MIN
When LONG_MIN is passed to msgrcv, one would expect to recieve any
message. But convert_mode does *msgtyp = -*msgtyp and -LONG_MIN is
undefined. In particular, with my gcc -LONG_MIN produces -LONG_MIN
again.
So handle this case properly by assigning LONG_MAX to *msgtyp if
LONG_MIN was specified as msgtyp to msgrcv.
This code:
long msg[] = { 100, 200 };
int m = msgget(IPC_PRIVATE, IPC_CREAT | 0644);
msgsnd(m, &msg, sizeof(msg), 0);
msgrcv(m, &msg, sizeof(msg), LONG_MIN, 0);
initramfs: allow again choice of the embedded initram compression algorithm
Choosing the appropriate compression option when using an embedded
initramfs can result in significant size differences in the resulting
data.
This is caused by avoiding double compression of the initramfs contents.
For example on my tests, choosing CONFIG_INITRAMFS_COMPRESSION_NONE when
compressing the kernel using XZ) results in up to 500KiB differences
(9MiB to 8.5MiB) in the kernel size as the dictionary will not get
polluted with uncomprensible data and may reuse kernel data too.
Despite embedding an uncompressed initramfs, a user may want to allow
for a compressed extra initramfs to be passed using the rd system, for
example to boot a recovery system. 9ba4bcb645898d ("initramfs: read
CONFIG_RD_ variables for initramfs compression") broke that behavior by
making the choice based on CONFIG_RD_* instead of adding
CONFIG_INITRAMFS_COMPRESSION_LZ4. Saddly, CONFIG_RD_* is also used to
choose the supported RD compression algorithms by the kernel and a user
may want to support more than one.
This patch also reverts commit 3e4e0f0a875 ("initramfs: remove
"compression mode" choice") restoring back the "compression mode" choice
and includes the CONFIG_INITRAMFS_COMPRESSION_LZ4 option which was never
added.
As a result the following options are added or readed affecting the embedded
initramfs compression:
INITRAMFS_COMPRESSION_NONE Do no compression
INITRAMFS_COMPRESSION_GZIP Compress using gzip
INITRAMFS_COMPRESSION_BZIP2 Compress using bzip2
INITRAMFS_COMPRESSION_LZMA Compress using lzma
INITRAMFS_COMPRESSION_XZ Compress using xz
INITRAMFS_COMPRESSION_LZO Compress using lzo
INITRAMFS_COMPRESSION_LZ4 Compress using lz4
These depend on the corresponding CONFIG_RD_* option being set (except
NONE which has no dependencies).
This patch depends on the previous one (the previous version didn't) to
simplify the way in which the algorithm is chosen and keep backwards
compatibility with the behaviour introduced by 9ba4bcb645898
("initramfs: read CONFIG_RD_ variables for initramfs compression").
Link: http://lkml.kernel.org/r/57EAD77B.7090607@klondike.es Signed-off-by: Francisco Blas Izquierdo Riera (klondike) <klondike@klondike.es> Cc: P J P <ppandit@redhat.com> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
initramfs: select builtin initram compression algorithm on KConfig instead of Makefile
Move the current builtin initram compression algorithm selection from
the Makefile into the INITRAMFS_COMPRESSION variable. This makes
deciding algorithm precedence easier and would allow for overrides if
new algorithms want to be tested.
Link: http://lkml.kernel.org/r/57EAD769.1090401@klondike.es Signed-off-by: Francisco Blas Izquierdo Riera (klondike) <klondike@klondike.es> Cc: P J P <ppandit@redhat.com> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Wed, 14 Dec 2016 23:05:58 +0000 (15:05 -0800)]
kdb: call vkdb_printf() from vprintk_default() only when wanted
kdb_trap_printk allows to pass normal printk() messages to kdb via
vkdb_printk(). For example, it is used to get backtrace using the
classic show_stack(), see kdb_show_stack().
vkdb_printf() tries to avoid a potential infinite loop by disabling the
trap. But this approach is racy, for example:
Problem1: Now, a nested printk() on CPU0 calls vkdb_printf()
even when it should have been disabled. It will not
cause a deadlock but...
// using the outdated saved value: 0
kdb_trap_printk = saved_trap_printk;
kdb_trap_printk--;
Problem2: Now, kdb_trap_printk == -1 and will stay like this.
It means that all messages will get passed to kdb from
now on.
This patch removes the racy saved_trap_printk handling. Instead, the
recursion is prevented by a check for the locked CPU.
The solution is still kind of racy. A non-related printk(), from
another process, might get trapped by vkdb_printf(). And the wanted
printk() might not get trapped because kdb_printf_cpu is assigned. But
this problem existed even with the original code.
A proper solution would be to get_cpu() before setting kdb_trap_printk
and trap messages only from this CPU. I am not sure if it is worth the
effort, though.
In fact, the race is very theoretical. When kdb is running any of the
commands that use kdb_trap_printk there is a single active CPU and the
other CPUs should be in a holding pen inside kgdb_cpu_enter().
The only time this is violated is when there is a timeout waiting for
the other CPUs to report to the holding pen.
Finally, note that the situation is a bit schizophrenic. vkdb_printf()
explicitly allows recursion but only from KDB code that calls
kdb_printf() directly. On the other hand, the generic printk()
recursion is not allowed because it might cause an infinite loop. This
is why we could not hide the decision inside vkdb_printf() easily.
Link: http://lkml.kernel.org/r/1480412276-16690-4-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Wed, 14 Dec 2016 23:05:55 +0000 (15:05 -0800)]
kdb: properly synchronize vkdb_printf() calls with other CPUs
kdb_printf_lock does not prevent other CPUs from entering the critical
section because it is ignored when KDB_STATE_PRINTF_LOCK is set.
The problematic situation might look like:
CPU0 CPU1
vkdb_printf()
if (!KDB_STATE(PRINTF_LOCK))
KDB_STATE_SET(PRINTF_LOCK);
spin_lock_irqsave(&kdb_printf_lock, flags);
vkdb_printf()
if (!KDB_STATE(PRINTF_LOCK))
BANG: The PRINTF_LOCK state is set and CPU1 is entering the critical
section without spinning on the lock.
The problem is that the code tries to implement locking using two state
variables that are not handled atomically. Well, we need a custom
locking because we want to allow reentering the critical section on the
very same CPU.
Let's use solution from Petr Zijlstra that was proposed for a similar
scenario, see
https://lkml.kernel.org/r/20161018171513.734367391@infradead.org
This patch uses the same trick with cmpxchg(). The only difference is
that we want to handle only recursion from the same context and
therefore we disable interrupts.
In addition, KDB_STATE_PRINTF_LOCK is removed. In fact, we are not able
to set it a non-racy way.
Link: http://lkml.kernel.org/r/1480412276-16690-3-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Wed, 14 Dec 2016 23:05:52 +0000 (15:05 -0800)]
kdb: remove unused kdb_event handling
kdb_event state variable is only set but never checked in the kernel
code.
http://www.spinics.net/lists/kdb/msg01733.html suggests that this
variable affected WARN_CONSOLE_UNLOCKED() in the original
implementation. But this check never went upstream.
The semantic is unclear and racy. The value is updated after the
kdb_printf_lock is acquired and after it is released. It should be
symmetric at minimum. The value should be manipulated either inside or
outside the locked area.
Fortunately, it seems that the original function is gone and we could
simply remove the state variable.
Link: http://lkml.kernel.org/r/1480412276-16690-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Douglas Anderson [Wed, 14 Dec 2016 23:05:49 +0000 (15:05 -0800)]
kernel/debug/debug_core.c: more properly delay for secondary CPUs
We've got a delay loop waiting for secondary CPUs. That loop uses
loops_per_jiffy. However, loops_per_jiffy doesn't actually mean how
many tight loops make up a jiffy on all architectures. It is quite
common to see things like this in the boot log:
Calibrating delay loop (skipped), value calculated using timer
frequency.. 48.00 BogoMIPS (lpj=24000)
In my case I was seeing lots of cases where other CPUs timed out
entering the debugger only to print their stack crawls shortly after the
kdb> prompt was written.
Elsewhere in kgdb we already use udelay(), so that should be safe enough
to use to implement our timeout. We'll delay 1 ms for 1000 times, which
should give us a full second of delay (just like the old code wanted)
but allow us to notice that we're done every 1 ms.
[akpm@linux-foundation.org: simplifications, per Daniel] Link: http://lkml.kernel.org/r/1477091361-2039-1-git-send-email-dianders@chromium.org Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Brian Norris <briannorris@chromium.org> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 14 Dec 2016 23:05:38 +0000 (15:05 -0800)]
relay: check array offset before using it
Smatch complains that we started using the array offset before we
checked that it was valid.
Fixes: 017c59c042d0 ('relay: Use per CPU constructs for the relay channel buffer pointers') Link: http://lkml.kernel.org/r/20161013084947.GC16198@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Duyck [Wed, 14 Dec 2016 23:05:34 +0000 (15:05 -0800)]
igb: update code to better handle incrementing page count
Update the driver code so that we do bulk updates of the page reference
count instead of just incrementing it by one reference at a time. The
advantage to doing this is that we cut down on atomic operations and
this in turn should give us a slight improvement in cycles per packet.
In addition if we eventually move this over to using build_skb the gains
will be more noticeable.
Link: http://lkml.kernel.org/r/20161110113616.76501.17072.stgit@ahduyck-blue-test.jf.intel.com Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Duyck [Wed, 14 Dec 2016 23:05:30 +0000 (15:05 -0800)]
igb: update driver to make use of DMA_ATTR_SKIP_CPU_SYNC
The ARM architecture provides a mechanism for deferring cache line
invalidation in the case of map/unmap. This patch makes use of this
mechanism to avoid unnecessary synchronization.
A secondary effect of this change is that the portion of the page that
has been synchronized for use by the CPU should be writable and could be
passed up the stack (at least on ARM).
The last bit that occurred to me is that on architectures where the
sync_for_cpu call invalidates cache lines we were prefetching and then
invalidating the first 128 bytes of the packet. To avoid that I have
moved the sync up to before we perform the prefetch and allocate the
skbuff so that we can actually make use of it.
Link: http://lkml.kernel.org/r/20161110113611.76501.98897.stgit@ahduyck-blue-test.jf.intel.com Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Duyck [Wed, 14 Dec 2016 23:05:26 +0000 (15:05 -0800)]
mm: add support for releasing multiple instances of a page
Add a function that allows us to batch free a page that has multiple
references outstanding. Specifically this function can be used to drop
a page being used in the page frag alloc cache. With this drivers can
make use of functionality similar to the page frag alloc cache without
having to do any workarounds for the fact that there is no function that
frees multiple references.
Link: http://lkml.kernel.org/r/20161110113606.76501.70752.stgit@ahduyck-blue-test.jf.intel.com Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Duyck [Wed, 14 Dec 2016 23:05:23 +0000 (15:05 -0800)]
dma: add calls for dma_map_page_attrs and dma_unmap_page_attrs
Add support for mapping and unmapping a page with attributes.
The primary use for this is currently to allow for us to pass the
DMA_ATTR_SKIP_CPU_SYNC attribute when mapping and unmapping a page. On
some architectures such as ARM the synchronization has significant
overhead and if we are already taking care of the sync_for_cpu and
sync_for_device from the driver there isn't much need to handle this in
the map/unmap calls as well.
Alexander Duyck [Wed, 14 Dec 2016 23:05:21 +0000 (15:05 -0800)]
arch/xtensa: add option to skip DMA sync as a part of mapping
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Alexander Duyck [Wed, 14 Dec 2016 23:05:18 +0000 (15:05 -0800)]
arch/tile: add option to skip DMA sync as a part of map and unmap
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Alexander Duyck [Wed, 14 Dec 2016 23:05:15 +0000 (15:05 -0800)]
arch/sparc: add option to skip DMA sync as a part of map and unmap
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Alexander Duyck [Wed, 14 Dec 2016 23:05:12 +0000 (15:05 -0800)]
arch/sh: add option to skip DMA sync as a part of mapping
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Link: http://lkml.kernel.org/r/20161110113539.76501.6539.stgit@ahduyck-blue-test.jf.intel.com Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Duyck [Wed, 14 Dec 2016 23:05:09 +0000 (15:05 -0800)]
arch/powerpc: add option to skip DMA sync as a part of mapping
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Alexander Duyck [Wed, 14 Dec 2016 23:05:06 +0000 (15:05 -0800)]
arch/parisc: add option to skip DMA sync as a part of map and unmap
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Alexander Duyck [Wed, 14 Dec 2016 23:05:03 +0000 (15:05 -0800)]
arch/openrisc: add option to skip DMA sync as a part of mapping
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Alexander Duyck [Wed, 14 Dec 2016 23:05:00 +0000 (15:05 -0800)]
arch/nios2: add option to skip DMA sync as a part of map and unmap
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Link: http://lkml.kernel.org/r/20161110113518.76501.52225.stgit@ahduyck-blue-test.jf.intel.com Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Cc: Ley Foon Tan <lftan@altera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Duyck [Wed, 14 Dec 2016 23:04:58 +0000 (15:04 -0800)]
arch/mips: add option to skip DMA sync as a part of map and unmap
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
projects / karo-tx-linux.git / log