Paul Mundt [Fri, 15 May 2009 03:03:04 +0000 (12:03 +0900)]
sh: hd64461: Fix up I/O base register offsets.
hd64461 is mapped in a fixed location, so the I/O base itself is fairly
meaningless as a configuration item. Additionally, this makes it
impossible to share hd64461 code alongside generic drivers (in the case
of sh_dac_audio), so simply make it commonly defined and permit the
mach_is_foo() logic to work out the proper semantics.
Paul Mundt [Thu, 14 May 2009 08:40:08 +0000 (17:40 +0900)]
sh: Provide FORCE_MAX_ZONEORDER.
Several platforms want to be able to do large physically contiguous
allocations (primarily nommu and video codecs on SH-Mobile), provide a
MAX_ORDER override for those cases.
Tested-by: Conrad Parker <conrad@metadecks.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Tue, 12 May 2009 10:25:54 +0000 (10:25 +0000)]
sh: remove old TMU driver
This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c)
As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU
and configure timer channel using platform data.
If multiple TMU channels are enabled using platform data, use the
earlytimer parameter on the kernel command line to select channel.
For instance, use "earlytimer=sh_tmu.0" to select the first channel.
To verify which timer is being used, look at printouts or the timer
irq count in /proc/interrupts.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Tue, 12 May 2009 10:21:11 +0000 (10:21 +0000)]
sh: CMT platform data for sh7720/sh7721
This patch adds CMT platform data for sh7720 and sh7721.
All 5 32-bit CMT channels unfortunately share a single IRQ.
Both clockevent and clocksource support is enabled.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Mon, 11 May 2009 09:01:08 +0000 (09:01 +0000)]
sh: multiple vectors per irq - sh7760
Update intc tables and platform data to use one linux irq
per maskable interrupt source instead of keeping the one-to-one
mapping between vectors and linux irqs.
This fixes potential irq masking issues for sh7760 hardware
blocks such as DMAC/TMU2/REF.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 11 May 2009 03:15:14 +0000 (12:15 +0900)]
sh: Account for INITIAL_JIFFIES when using jiffies clocksource.
In the case where we fall back on the generic jiffies clocksource,
INITIAL_JIFFIES needs to be accounted for so that printk times aren't
completely skewed.
Paul Mundt [Sun, 10 May 2009 05:25:39 +0000 (14:25 +0900)]
sh: Fix up R0 dependence in __arch_swab16/32.
There is nothing in these routines that inherently depends on R0 use.
Given that these routines are inlined, it is rather easy to blow up the
compiler by exhausting the spill class when performing a 64-bit swab.
This presently manifests itself as the following:
CC fs/ocfs2/suballoc.o
fs/ocfs2/suballoc.c: In function 'ocfs2_reserve_suballoc_bits':
fs/ocfs2/suballoc.c:638: error: unrecognizable insn:
(insn 2793 1230 1231 103 arch/sh/include/asm/swab.h:33 (set (reg:HI 853)
(subreg:HI (reg:SI 149 macl) 2)) -1 (expr_list:REG_DEAD (reg:SI 149 macl)
(nil)))
fs/ocfs2/suballoc.c:638: internal compiler error: in extract_insn, at recog.c:1991
This patch switches over to using an arbitrarily assigned register instead.
While the same issue does not exist in the SH-5 case, there is likewise no harm
in having an alternate register used for the byterev/shari pair.
Paul Mundt [Sat, 9 May 2009 16:23:25 +0000 (01:23 +0900)]
sh: Consolidate the boot link and entry offset definitions.
Consolidate these in a single place in the Kconfig menus. At the same
time, disable their interactivity and set them according to the board
config defaults.
Paul Mundt [Sat, 9 May 2009 15:55:45 +0000 (00:55 +0900)]
sh: Provide a BITS definition, use it in the arch/sh/boot/ Makefiles.
This introduces a BITS export that can handily be picked up by Makefiles
for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in
preparation for unifying the Makefiles.
Paul Mundt [Sat, 9 May 2009 15:25:08 +0000 (00:25 +0900)]
sh: Tidy up the ldscript output format specifier.
Tie this in to the Makefile directly, where we already know what we are
running on. This tidies up the linker script a bit, and is prep work for
unifying the arch/sh/boot/compressed linker scripts.
Paul Mundt [Sat, 9 May 2009 14:33:02 +0000 (23:33 +0900)]
sh: Integrate sh64 bits in vmlinux_32.lds.S.
This adds all of the requisite bits from vmlinux_64.lds.S in to the _32
variant, resulting in a unified and generic linker script that can be
shared across both.
Paul Mundt [Sat, 9 May 2009 08:57:21 +0000 (17:57 +0900)]
sh: Provide an __sdivsi3_2 export for sh64.
Newer code paths that are heavier in 64-bit math manage to get this
generated by newer compilers, provide a definition and export
accordingly. This is trivially wrapped around the existing __sdivsi3
code.
Paul Mundt [Fri, 8 May 2009 14:48:33 +0000 (23:48 +0900)]
serial: sh-sci: Fix up section mismatch in error path.
The sci_probe_single() path attempts to use sci_remove() for the error
path, while sci_remove() is still flagged as __devexit. So, we simply
discard the section annotation.
Paul Mundt [Fri, 8 May 2009 13:14:01 +0000 (22:14 +0900)]
sh: Kill off the GENERIC_CALIBRATE_DELAY ifndef.
Now that everyone is using the clock framework directly and we
unconditionally provide our own calibrate_delay() function, having it
wrapped in an ifndef is no longer useful. So, kill it off.
Paul Mundt [Fri, 8 May 2009 11:32:56 +0000 (20:32 +0900)]
sh: Always fixup unaligned userspace accesses on sh64.
sh64 has traditionally had this configurable via a Kconfig option
(CONFIG_SH64_USER_MISALIGNED_FIXUP). In practice it has never really been
terribly useful to turn this off, so just get rid of the option entirely.
We leave the sysctl around so we don't end up breaking existing root
file systems, and to allow folks that really want this off to do so at
their own risk.
Paul Mundt [Fri, 8 May 2009 10:48:47 +0000 (19:48 +0900)]
sh: Always select RTC_LIB, not just for SUPERH32.
The RTC_LIB helpers are used in arch/sh/kernel/time.c, which was
previously only the case for the 32-bit variant. Now that this has
become the common implementation, move the RTC_LIB select to reflect
that. Fixes up the sh64 build.
Paul Mundt [Fri, 8 May 2009 09:01:03 +0000 (18:01 +0900)]
sh: Drop dead rules from arch/sh/kernel/Makefile_64.
Several of these options are specific to the SHcompact ISA and will need
to be rewritten for SHmedia if they are to be supported at all. Drop
the impossible rules for now.
Magnus Damm [Fri, 8 May 2009 08:32:18 +0000 (08:32 +0000)]
sh: TMU platform data for sh7723
This patch adds TMU platform data for sh7723. Both clockevent
and clocksource support is enabled. While at it, adjust the
CMT clocksource rating to prioritize the TMU.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Fri, 8 May 2009 08:23:29 +0000 (08:23 +0000)]
sh: clock framework update, fix count and kill off kref
This patch updates the clock framework use count code.
With this patch the enable() and disable() callbacks
only get called when counting from and to zero.
While at it the kref stuff gets replaced with an int.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Fri, 8 May 2009 08:41:59 +0000 (17:41 +0900)]
sh: Move out cayman-specific panic handler code to its own file.
This moves out the cayman-specific panic handler code to a better
location, and leaves the generic implementation a simple stub that is
still used under emulation.
Paul Mundt [Fri, 8 May 2009 07:57:35 +0000 (16:57 +0900)]
sh: mach-sh03: Give the sh03 rtc its own spinlock.
This converts the sh03 rtc code off of using the global rtc_lock and on
to its own spinlock. There are no other possible users of the rtc_lock,
so serializing with it is not necessary.
Paul Mundt [Fri, 8 May 2009 07:36:13 +0000 (16:36 +0900)]
sh: Wire up GENERIC_CMOS_UPDATE for the platforms that need it.
Now that everything has converted over to generic timekeeping, we need an
alternate method for keeping the RTC updated for those platforms that are
still using the rtc_sh_get/set_time pairs, presently limited to SH-03 and
the Dreamcast. This wires up the GENERIC_CMOS_UPDATE hooks for those to
maintain the same behaviour.
Paul Mundt [Fri, 8 May 2009 07:12:17 +0000 (16:12 +0900)]
sh: Finish the sh64 migration off of ARCH_USES_GETTIMEOFFSET.
This adds sh_tmu support to the SH-5 subtypes, which subsequently allows
us to kill off time_64.c and use the now generic time_32.c. As a bonus,
SH-5 now supports highres timers and tickless for the first time.
Magnus Damm [Thu, 7 May 2009 10:31:39 +0000 (10:31 +0000)]
sh: call clock framework init() callback once
Make sure that clk->ops->init() only gets called once in
the case of CLK_ALWAYS_ENABLED. Without this patch the
init() callback may be called multiple times.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Thu, 7 May 2009 10:17:44 +0000 (10:17 +0000)]
sh: sh7785 early scif fix
This patch moves the SH4 case of EARLY_SCIF_CONSOLE_PORT
so the SH7785 default value gets used. Without this patch
the value for SH7785 is set to 0xffe80000.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 7 May 2009 09:10:27 +0000 (18:10 +0900)]
sh: Integrate the SH-5 onchip_remap() more coherently.
Presently this is special-cased for early initialization. While there are
situations where these static early initializations are still necessary,
with minor changes it is possible to use this for the regular ioremap
implementation as well. This allows us to kill off the special-casing for
the remap completely and to start tidying up all of the SH-5
special-casing in drivers.
Paul Mundt [Sun, 3 May 2009 09:29:27 +0000 (18:29 +0900)]
sh: Move dummy clockevents broadcast timer to its new home.
The old arch/sh/kernel/timers/ directly will be going away completely
once the rest of the TMU users are migrated, so move the dummy broadcast
driver up a level in preparation.
Paul Mundt [Sun, 3 May 2009 09:18:14 +0000 (18:18 +0900)]
sh: Kill off the now unused ARCH_USES_GETTIMEOFFSET code.
Now that the stragglers (MTU2/CMT/etc.) have been rewritten and we are
selecting both GENERIC_TIME and GENERIC_CLOCKEVENTS, the get_offset()
timer op is completely unused. As a result, we are now able to kill off
the ARCH_USES_GETTIMEOFFSET references.
Paul Mundt [Sun, 3 May 2009 08:57:17 +0000 (17:57 +0900)]
sh: Consolidate MTU2/CMT/TMU timer platform data.
All of the SH timers use a roughly identical structure for platform data,
which presently is broken out for each block. Consolidate all of these
definitions, as there is no reason for them to be broken out in the first
place.
Magnus Damm [Fri, 1 May 2009 06:58:52 +0000 (06:58 +0000)]
sh: TMU platform data for sh7722
This patch adds TMU platform data for sh7722. Only clockevent
mode is enabled for now, clocksource requires this patch:
"clocksource: setup mult_orig in clocksource_enable()"
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Fri, 1 May 2009 06:51:00 +0000 (06:51 +0000)]
clocksource: SuperH TMU Timer driver
This patch adds a TMU driver for the SuperH architecture.
The TMU driver is a platform driver with early platform
support to allow using a TMU channel as clockevent or
clocksource during system bootup or later.
Clocksource or clockevent can be selected.
Both periodic and oneshot clockevents are supported.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Thu, 30 Apr 2009 07:12:09 +0000 (07:12 +0000)]
sh: remove old MTU2 driver
This patch removes the old MTU2 driver (CONFIG_SH_MTU2/timer-mtu2.c)
As replacement, select the sh_cmt driver with CONFIG_SH_TIMER_MTU2
and configure timer channel using platform data.
If multiple MTU channels are enabled using platform data, use the
earlytimer parameter on the kernel command line to select channel.
For instance, use "earlytimer=sh_mtu2.0" to select the first channel.
To verify which timer is being used, look at printouts or the timer
irq count in /proc/interrupts.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
projects / mv-sheeva.git / log