Vincent Guittot [Mon, 12 Dec 2011 19:21:08 +0000 (20:21 +0100)]
sched: Ensure cpu_power periodic update
With a lot of small tasks, the softirq sched is nearly never called
when no_hz is enabled. In this case load_balance() is mainly called
with the newly_idle mode which doesn't update the cpu_power.
Add a next_update field which ensure a maximum update period when
there is short activity.
Having stale cpu_power information can skew the load-balancing
decisions, this is cured by the guaranteed update.
Peter Zijlstra [Thu, 26 Jan 2012 11:44:34 +0000 (12:44 +0100)]
sched, block: Unify cache detection
The block layer has some code trying to determine if two CPUs share a
cache, the scheduler has a similar function. Expose the function used
by the scheduler and make the block layer use it, thereby removing the
block layers usage of CONFIG_SCHED* and topology bits.
Chanho Min [Thu, 5 Jan 2012 11:00:19 +0000 (20:00 +0900)]
sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
This issue happens under the following conditions:
1. preemption is off
2. __ARCH_WANT_INTERRUPTS_ON_CTXSW is defined
3. RT scheduling class
4. SMP system
Sequence is as follows:
1.suppose current task is A. start schedule()
2.task A is enqueued pushable task at the entry of schedule()
__schedule
prev = rq->curr;
...
put_prev_task
put_prev_task_rt
enqueue_pushable_task
4.pick the task B as next task.
next = pick_next_task(rq);
3.rq->curr set to task B and context_switch is started.
rq->curr = next;
4.At the entry of context_swtich, release this cpu's rq->lock.
context_switch
prepare_task_switch
prepare_lock_switch
raw_spin_unlock_irq(&rq->lock);
5.Shortly after rq->lock is released, interrupt is occurred and start IRQ context
6.try_to_wake_up() which called by ISR acquires rq->lock
try_to_wake_up
ttwu_remote
rq = __task_rq_lock(p)
ttwu_do_wakeup(rq, p, wake_flags);
task_woken_rt
7.push_rt_task picks the task A which is enqueued before.
task_woken_rt
push_rt_tasks(rq)
next_task = pick_next_pushable_task(rq)
8.At find_lock_lowest_rq(), If double_lock_balance() returns 0,
lowest_rq can be the remote rq.
(But,If preemption is on, double_lock_balance always return 1 and it
does't happen.)
push_rt_task
find_lock_lowest_rq
if (double_lock_balance(rq, lowest_rq))..
9.find_lock_lowest_rq return the available rq. task A is migrated to
the remote cpu/rq.
push_rt_task
...
deactivate_task(rq, next_task, 0);
set_task_cpu(next_task, lowest_rq->cpu);
activate_task(lowest_rq, next_task, 0);
10. But, task A is on irq context at this cpu.
So, task A is scheduled by two cpus at the same time until restore from IRQ.
Task A's stack is corrupted.
To fix it, don't migrate an RT task if it's still running.
Yasunori Goto [Tue, 17 Jan 2012 08:40:31 +0000 (17:40 +0900)]
sched: Fix ancient race in do_exit()
try_to_wake_up() has a problem which may change status from TASK_DEAD to
TASK_RUNNING in race condition with SMI or guest environment of virtual
machine. As a result, exited task is scheduled() again and panic occurs.
Here is the sequence how it occurs:
----------------------------------+-----------------------------
|
CPU A | CPU B
----------------------------------+-----------------------------
TASK A calls exit()....
do_exit()
exit_mm()
down_read(mm->mmap_sem);
rwsem_down_failed_common()
set TASK_UNINTERRUPTIBLE
set waiter.task <= task A
list_add to sem->wait_list
:
raw_spin_unlock_irq()
(I/O interruption occured)
__rwsem_do_wake(mmap_sem)
list_del(&waiter->list);
waiter->task = NULL
wake_up_process(task A)
try_to_wake_up()
(task is still
TASK_UNINTERRUPTIBLE)
p->on_rq is still 1.)
schedule()
(exit task is running again)
BUG_ON() is called!
--------------------------------------------------------
The execution time between (*A) and (*B) is usually very short,
because the interruption is disabled, and setting TASK_RUNNING at (*C)
must be executed before setting TASK_DEAD.
HOWEVER, if SMI is interrupted between (*A) and (*B),
(*C) is able to execute AFTER setting TASK_DEAD!
Then, exited task is scheduled again, and BUG_ON() is called....
If the system works on guest system of virtual machine, the time
between (*A) and (*B) may be also long due to scheduling of hypervisor,
and same phenomenon can occur.
By this patch, do_exit() waits for releasing task->pi_lock which is used
in try_to_wake_up(). It guarantees the task becomes TASK_DEAD after
waking up.
Suresh Siddha [Fri, 20 Jan 2012 02:28:57 +0000 (18:28 -0800)]
sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
With the recent nohz scheduler changes, rq's nohz flag
'NOHZ_TICK_STOPPED' and its associated state doesn't get cleared
immediately after the cpu exits idle. This gets cleared as part
of the next tick seen on that cpu.
For the cpu offline support, we need to clear this state
manually. Fix it by registering a cpu notifier, which clears the
nohz idle load balance state for this rq explicitly during the
CPU_DYING notification.
There won't be any nohz updates for that cpu, after the
CPU_DYING notification. But lets be extra paranoid and skip
updating the nohz state in the select_nohz_load_balancer() if
the cpu is not in active state anymore.
Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-and-tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1327026538.16150.40.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
CC kernel/sched/core.o
kernel/sched/core.c: In function ‘mutex_spin_on_owner’:
kernel/sched/core.c:3287: error: implicit declaration of function ‘arch_mutex_cpu_relax’
Kosaki-San's scenario is possible when CPU0 runs
__sched_setscheduler() against CPU1's current @task.
__sched_setscheduler() does a dequeue/enqueue in order to move
the task to its new queue (position) to reflect the newly provided
scheduling parameters. However it should be completely invariant to
nr_uninterruptible accounting, sched_setscheduler() doesn't affect
readyness to run, merely policy on when to run.
So convert the inappropriate activate/deactivate_task usage to
enqueue/dequeue_task, which avoids the nr_uninterruptible accounting.
Also convert the two other sites: __migrate_task() and
normalize_task() that still use activate/deactivate_task. These sites
aren't really a problem since __migrate_task() will only be called on
non-running task (and therefore are immume to the described problem)
and normalize_task() isn't ever used on regular systems.
Also remove the comments from activate/deactivate_task since they're
misleading at best.
Linus Torvalds [Wed, 25 Jan 2012 23:36:44 +0000 (15:36 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Quoth Ben Myers:
"Please pull in the following bugfix for xfs. We forgot to drop a lock on
error in xfs_readlink. It hasn't been through -next yet, but there is no
-next tree tomorrow. The fix is clear so I'm sending this request today."
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: Fix missing xfs_iunlock() on error recovery path in xfs_readlink()
Linus Torvalds [Wed, 25 Jan 2012 23:13:04 +0000 (15:13 -0800)]
Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error
ASoC: wm8958: Use correct format string in dev_err() call
ASoC: wm8996: Call _POST_PMU callback for CPVDD
ASoC: mxs: Fix mxs-saif timeout
ASoC: Disable register synchronisation for low frequency WM8996 SYSCLK
ASoC: Don't go through cache when applying WM5100 rev A updates
ASoC: Mark WM5100 register map cache only when going into BIAS_OFF
ASoC: tlv320aic32x4: always enable analouge block
ASoC: tlv320aic32x4: always enable dividers
ASoC: sgtl5000: Fix wrong register name in restore
Linus Torvalds [Wed, 25 Jan 2012 23:11:57 +0000 (15:11 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
A fairly simple bugfix for a WARN_ON() which was triggered in the cache
reset support as a result of some subsequent work. There's only one
mainline user for the code path that's updated right now (wm8994) so
should be low risk.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Reset cache status when reinitialsing the cache
Li Wang [Wed, 25 Jan 2012 07:40:31 +0000 (15:40 +0800)]
eCryptfs: move misleading function comments
The data encryption was moved from ecryptfs_write_end into
ecryptfs_writepage, this patch moves the corresponding function
comments to be consistent with the modification.
Signed-off-by: Li Wang <liwang@nudt.edu.cn> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 25 Jan 2012 23:03:04 +0000 (15:03 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Says Tyler:
"Tim's logging message update will be really helpful to users when
they're trying to locate a problematic file in the lower filesystem
with filename encryption enabled.
You'll recognize the fix from Li, as you commented on that.
You should also be familiar with my setattr/truncate improvements,
since you were the one that pointed them out to us (thanks again!).
Andrew noted the /dev/ecryptfs write count sanitization needed to be
improved, so I've got a fix in there for that along with some other
less important cleanups of the /dev/ecryptfs read/write code."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Fix oops when printing debug info in extent crypto functions
eCryptfs: Remove unused ecryptfs_read()
eCryptfs: Check inode changes in setattr
eCryptfs: Make truncate path killable
eCryptfs: Infinite loop due to overflow in ecryptfs_write()
eCryptfs: Replace miscdev read/write magic numbers
eCryptfs: Report errors in writes to /dev/ecryptfs
eCryptfs: Sanitize write counts of /dev/ecryptfs
ecryptfs: Remove unnecessary variable initialization
ecryptfs: Improve metadata read failure logging
MAINTAINERS: Update eCryptfs maintainer address
Tyler Hicks [Tue, 24 Jan 2012 16:02:22 +0000 (10:02 -0600)]
eCryptfs: Fix oops when printing debug info in extent crypto functions
If pages passed to the eCryptfs extent-based crypto functions are not
mapped and the module parameter ecryptfs_verbosity=1 was specified at
loading time, a NULL pointer dereference will occur.
Note that this wouldn't happen on a production system, as you wouldn't
pass ecryptfs_verbosity=1 on a production system. It leaks private
information to the system logs and is for debugging only.
The debugging info printed in these messages is no longer very useful
and rather than doing a kmap() in these debugging paths, it will be
better to simply remove the debugging paths completely.
https://launchpad.net/bugs/913651
Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reported-by: Daniel DeFreez Cc: <stable@vger.kernel.org>
Tyler Hicks [Fri, 20 Jan 2012 02:33:44 +0000 (20:33 -0600)]
eCryptfs: Check inode changes in setattr
Most filesystems call inode_change_ok() very early in ->setattr(), but
eCryptfs didn't call it at all. It allowed the lower filesystem to make
the call in its ->setattr() function. Then, eCryptfs would copy the
appropriate inode attributes from the lower inode to the eCryptfs inode.
This patch changes that and actually calls inode_change_ok() on the
eCryptfs inode, fairly early in ecryptfs_setattr(). Ideally, the call
would happen earlier in ecryptfs_setattr(), but there are some possible
inode initialization steps that must happen first.
Since the call was already being made on the lower inode, the change in
functionality should be minimal, except for the case of a file extending
truncate call. In that case, inode_newsize_ok() was never being
called on the eCryptfs inode. Rather than inode_newsize_ok() catching
maximum file size errors early on, eCryptfs would encrypt zeroed pages
and write them to the lower filesystem until the lower filesystem's
write path caught the error in generic_write_checks(). This patch
introduces a new function, called ecryptfs_inode_newsize_ok(), which
checks if the new lower file size is within the appropriate limits when
the truncate operation will be growing the lower file.
In summary this change prevents eCryptfs truncate operations (and the
resulting page encryptions), which would exceed the lower filesystem
limits or FSIZE rlimits, from ever starting.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reviewed-by: Li Wang <liwang@nudt.edu.cn> Cc: <stable@vger.kernel.org>
Tyler Hicks [Thu, 19 Jan 2012 00:30:04 +0000 (18:30 -0600)]
eCryptfs: Make truncate path killable
ecryptfs_write() handles the truncation of eCryptfs inodes. It grabs a
page, zeroes out the appropriate portions, and then encrypts the page
before writing it to the lower filesystem. It was unkillable and due to
the lack of sparse file support could result in tying up a large portion
of system resources, while encrypting pages of zeros, with no way for
the truncate operation to be stopped from userspace.
This patch adds the ability for ecryptfs_write() to detect a pending
fatal signal and return as gracefully as possible. The intent is to
leave the lower file in a useable state, while still allowing a user to
break out of the encryption loop. If a pending fatal signal is detected,
the eCryptfs inode size is updated to reflect the modified inode size
and then -EINTR is returned.
Li Wang [Thu, 19 Jan 2012 01:44:36 +0000 (09:44 +0800)]
eCryptfs: Infinite loop due to overflow in ecryptfs_write()
ecryptfs_write() can enter an infinite loop when truncating a file to a
size larger than 4G. This only happens on architectures where size_t is
represented by 32 bits.
This was caused by a size_t overflow due to it incorrectly being used to
store the result of a calculation which uses potentially large values of
type loff_t.
[tyhicks@canonical.com: rewrite subject and commit message] Signed-off-by: Li Wang <liwang@nudt.edu.cn> Signed-off-by: Yunchuan Wen <wenyunchuan@kylinos.com.cn> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
ecryptfs_miscdev_read() and ecryptfs_miscdev_write() contained many
magic numbers for specifying packet header field sizes and offsets. This
patch defines those values and replaces the magic values.
Tyler Hicks [Thu, 12 Jan 2012 10:30:44 +0000 (11:30 +0100)]
eCryptfs: Sanitize write counts of /dev/ecryptfs
A malicious count value specified when writing to /dev/ecryptfs may
result in a a very large kernel memory allocation.
This patch peeks at the specified packet payload size, adds that to the
size of the packet headers and compares the result with the write count
value. The resulting maximum memory allocation size is approximately 532
bytes.
Removes unneeded variable initialization in ecryptfs_read_metadata(). Also adds
a small comment to help explain metadata reading logic.
[tyhicks@canonical.com: Pulled out of for-stable patch and wrote commit msg] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tim Gardner [Thu, 12 Jan 2012 15:31:55 +0000 (16:31 +0100)]
ecryptfs: Improve metadata read failure logging
Print inode on metadata read failure. The only real
way of dealing with metadata read failures is to delete
the underlying file system file. Having the inode
allows one to 'find . -inum INODE`.
[tyhicks@canonical.com: Removed some minor not-for-stable parts] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
move_notify() was originally able to presume that bo->mem is the old node,
and new_mem is the new node. The above commit moves the call to
move_notify() to after move() has been done, which means that now, sometimes,
new_mem isn't the new node at all, bo->mem is, and new_mem points at a
stale, possibly-just-been-killed-by-move node.
This is clearly not a good situation. This patch reverts this change, and
replaces it with a cleanup in the move() failure path instead.
The second issue is that the call to move_notify() from cleanup_memtype_use()
causes the TTM ghost objects to get passed into the driver. This is clearly
bad as the driver knows nothing about these "fake" TTM BOs, and ends up
accessing uninitialised memory.
I worked around this in nouveau's move_notify() hook by ensuring the BO
destructor was nouveau's. I don't particularly like this solution, and
would rather TTM never pass the driver these objects. However, I don't
clearly understand the reason why we're calling move_notify() here anyway
and am happy to work around the problem in nouveau instead of breaking the
behaviour expected by other drivers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jan Kara [Wed, 11 Jan 2012 18:52:10 +0000 (18:52 +0000)]
xfs: Fix missing xfs_iunlock() on error recovery path in xfs_readlink()
Commit b52a360b forgot to call xfs_iunlock() when it detected corrupted
symplink and bailed out. Fix it by jumping to 'out' instead of doing return.
CC: stable@kernel.org CC: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Alex Elder <elder@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Jerome Glisse [Mon, 23 Jan 2012 16:52:15 +0000 (11:52 -0500)]
drm/radeon: avoid deadlock if GPU lockup is detected in ib_pool_get
If GPU lockup is detected in ib_pool get we are holding the ib_pool
mutex that will be needed by the GPU reset code. As ib_pool code is
safe to be reentrant from GPU reset code we should not block if we
are trying to get the ib pool lock on the behalf of the same userspace
caller, thus use the radeon_mutex_lock helper.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Tue, 24 Jan 2012 17:08:52 +0000 (12:08 -0500)]
drm/radeon: silence out possible lock dependency warning
Silence out the lock dependency warning by moving bo allocation out
of ib mutex protected section. Might lead to useless temporary
allocation but it's not harmful as such things only happen at
initialization.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Tue, 24 Jan 2012 17:54:21 +0000 (18:54 +0100)]
drm: Fix authentication kernel crash
If the master tries to authenticate a client using drm_authmagic and
that client has already closed its drm file descriptor,
either wilfully or because it was terminated, the
call to drm_authmagic will dereference a stale pointer into kmalloc'ed memory
and corrupt it.
Typically this results in a hard system hang.
This patch fixes that problem by removing any authentication tokens
(struct drm_magic_entry) open for a file descriptor when that file
descriptor is closed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 25 Jan 2012 06:05:44 +0000 (22:05 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Quoth Len:
"This fixes a merge-window regression due to a conflict
between error injection and preparation to remove atomicio.c
Here we fix that regression and complete the removal
of atomicio.c.
This also re-orders some idle initialization code to
complete the merge window series that allows cpuidle
to cope with bringing processors on-line after boot."
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
Use acpi_os_map_memory() instead of ioremap() in einj driver
ACPI, APEI, EINJ, cleanup 0 vs NULL confusion
ACPI, APEI, EINJ Allow empty Trigger Error Action Table
thermal: Rename generate_netlink_event
ACPI / PM: Add Sony Vaio VPCCW29FX to nonvs blacklist.
ACPI: Remove ./drivers/acpi/atomicio.[ch]
ACPI, APEI: Add RAM mapping support to ACPI
ACPI, APEI: Add 64-bit read/write support for APEI on i386
ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged cores
ACPI processor hotplug: Split up acpi_processor_add
Linus Torvalds [Wed, 25 Jan 2012 05:17:51 +0000 (21:17 -0800)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix build on some non-freescale platforms
powerpc/powernv: Fix PCI resource handling
powerpc/crash: Fix build error without SMP
powerpc/cpuidle: Make it a bool, not a tristate
powerpc/85xx: Add dr_mode property in USB nodes
powerpc/85xx: Enable USB2 controller node for P1020RDB
powerpc/85xx: Fix cmd12 bug and add the chip compatible for eSDHC
arch/powerpc/sysdev/fsl_pci.c: add missing iounmap
powerpc: fix compile error with 85xx/p1022_ds.c
powerpc: Fix build on some non-freescale platforms
Commit 9deaa53ac7fa373623123aa4f18828dd62292b1a broke build
on platforms that use legacy_serial.c without also having
CONFIG_SERIAL_8250_FSL enabled due to an unconditional code
to a routine in that module.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Recent changes to the handling of PCI resources for host bridges
are breaking the PowerNV code for assigning resources on IODA.
The root of the problem is that the pci_bus attached to a host
bridge no longer has its "legacy" resource pointers populated
but only uses the newer list instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
14) skge carrier assertion and DMA mapping fixes from Stephen Hemminger.
15) Congestion recovery undo performed at the wrong spot in BIC and CUBIC
congestion control modules, fix from Neal Cardwell.
16) Ethtool ETHTOOL_GSSET_INFO is unnecessarily restrictive, from Michał Mirosław.
17) Fix triggerable race in ipv6 sysctl handling, from Francesco Ruggeri.
18) Statistics bug fixes in mlx4 from Eugenia Emantayev.
19) rds locking bug fix during info dumps, from your's truly.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
rds: Make rds_sock_lock BH rather than IRQ safe.
netprio_cgroup.h: dont include module.h from other includes
net: flow_dissector.c missing include linux/export.h
team: send only changed options/ports via netlink
net/hyperv: fix possible memory leak in do_set_multicast()
drivers/net: dsa/mv88e6xxx.c files need linux/module.h
stmmac: added PCI identifiers
llc: Fix race condition in llc_ui_recvmsg
stmmac: fix phy naming inconsistency
dsa: Add reporting of silicon revision for Marvell 88E6123/88E6161/88E6165 switches.
tg3: fix ipv6 header length computation
skge: add byte queue limit support
mv643xx_eth: Add Rx Discard and Rx Overrun statistics
bnx2x: fix compilation error with SOE in fw_dump
bnx2x: handle CHIP_REVISION during init_one
bnx2x: allow user to change ring size in ISCSI SD mode
bnx2x: fix Big-Endianess in ethtool -t
bnx2x: fixed ethtool statistics for MF modes
bnx2x: credit-leakage fixup on vlan_mac_del_all
macvlan: fix a possible use after free
...
Deepthi Dharwar [Thu, 12 Jan 2012 03:05:55 +0000 (03:05 +0000)]
powerpc/cpuidle: Make it a bool, not a tristate
As pointed out, asm/system.h has empty inline implementations for
update_smt_snooze_delay and pseries_notify_cpuidle_add_cpu, which are
used when CONFIG_PSERIES_IDLE is undefined. Since those two functions
are used in core power architecture functions (store_smt_snooze_delay
at kernel/sysfs.c and smp_xics_setup_cpu at platforms/pseries/smp.c),
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
David S. Miller [Tue, 24 Jan 2012 22:03:44 +0000 (17:03 -0500)]
rds: Make rds_sock_lock BH rather than IRQ safe.
rds_sock_info() triggers locking warnings because we try to perform a
local_bh_enable() (via sock_i_ino()) while hardware interrupts are
disabled (via taking rds_sock_lock).
There is no reason for rds_sock_lock to be a hardware IRQ disabling
lock, none of these access paths run in hardware interrupt context.
Therefore making it a BH disabling lock is safe and sufficient to
fix this bug.
Reported-by: Kumar Sanghvi <kumaras@chelsio.com> Reported-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Gortmaker [Tue, 24 Jan 2012 11:33:19 +0000 (11:33 +0000)]
netprio_cgroup.h: dont include module.h from other includes
A considerable effort was invested in wiping out module.h
from being present in all the other standard includes. This
one leaked back in, but once again isn't strictly necessary,
so remove it.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 24 Jan 2012 05:16:00 +0000 (05:16 +0000)]
team: send only changed options/ports via netlink
This patch changes event message behaviour to send only updated records
instead of whole list. This fixes bug on which userspace receives non-actual
data in case multiple events occur in row.
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 24 Jan 2012 10:21:28 +0000 (10:21 +0000)]
net/hyperv: fix possible memory leak in do_set_multicast()
do_set_multicast() may not free the memory malloc in
netvsc_set_multicast_list().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Gortmaker [Tue, 24 Jan 2012 10:41:40 +0000 (10:41 +0000)]
drivers/net: dsa/mv88e6xxx.c files need linux/module.h
An implicit instance of module.h leaked back into existence
and was masking the fact that these drivers weren't calling
out the include for itself. Fix the drivers before we remove
the implicit include path via net/netprio_cgroup.h file.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
STM has a device ID within its own VENDOR space, and it is being
used in the STA2X11 I/O Hub.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
After commit "db8857b stmmac: use an unique MDIO bus name" my
device stopped being probed because two different names were being
used in different places. This fixes the inconsistency.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Florian Fainelli <florian@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 24 Jan 2012 20:12:40 +0000 (12:12 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Pass information that quota is stored in system file to userspace
ext2: protect inode changes in the SETVERSION and SETFLAGS ioctls
jbd: Issue cache flush after checkpointing
Mark Brown [Tue, 24 Jan 2012 11:17:26 +0000 (11:17 +0000)]
regulator: Fix documentation for of_node parameter of regulator_register()
Commit 5bc75a886353 ("kernel-doc: fix new warning in regulator core")
added documentation for of_node to address a warning but the
documentation didn't explain what the parameter is for so would be
likely to be unhelpful for users. Clarify that.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Deucher [Fri, 20 Jan 2012 20:03:30 +0000 (15:03 -0500)]
drm/radeon/kms: refine TMDS dual link checks
HDMI 1.3 defines single link clocks up to 340 Mhz.
Refine the current dual link checks to only enable
dual link for DVI > 165 Mhz or HDMI > 340 Mhz if the
hw supports HDMI 1.3 (DCE3+).
Igor Murzov [Sun, 22 Jan 2012 14:47:28 +0000 (18:47 +0400)]
drm/radeon: finish getting bios earlier
Return a number of bytes read in radeon_atrm_get_bios_chunk() and
properly check this value in radeon_atrm_get_bios().
If radeon_atrm_get_bios_chunk() read less bytes then were requested,
it means that it finished reading bios data.
Prior to this patch, condition in radeon_atrm_get_bios() was always
equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false,
thus radeon_atrm_get_bios() was trying to read past the bios data
wasting boot time.
On my lenovo ideapad u455 laptop this patch drops bios reading time
from ~5.5s to ~1.5s.
Signed-off-by: Igor Murzov <e-mail@date.by> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Call to acpi_evaluate_object() not always returns 4096 bytes chunks,
on my system it can return 2048 bytes chunk, so pass the length of
retrieved chunk to memcpy(), not the length of the recieving buffer.
Signed-off-by: Igor Murzov <e-mail@date.by> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jesper Juhl [Mon, 23 Jan 2012 21:28:44 +0000 (22:28 +0100)]
ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error
In wm2000_i2c_probe(), if we take the true branch in
"
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000,
NULL, 0);
if (ret != 0)
goto err_fw;
"
then we'll release_firmware(fw) at the 'err_fw' label. But we've already
done that just a few lines above. That's a use-after-free bug.
This patch restructures the code so that we always call
release_firmware(fw) before leaving the function, but only ever call
it once.
This means that we have to initialize 'fw' to NULL since some paths
may now end up calling it without having called request_firmware(),
but since request_firmware() deals gracefully with NULL pointers, we
are fine if we just NULL initialize it.
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Luck, Tony [Mon, 23 Jan 2012 23:27:56 +0000 (15:27 -0800)]
Use acpi_os_map_memory() instead of ioremap() in einj driver
ioremap() has become more picky and is now spitting out console messages like:
ioremap error for 0xbddbd000-0xbddbe000, requested 0x10, got 0x0
when loading the einj driver. What we are trying to so here is map
a couple of data structures that the EINJ table points to. Perhaps
acpi_os_map_memory() is a better tool for this?
Most importantly it works, but as a side benefit it maps the structures
into kernel virtual space so we can access them with normal C memory
dereferences, so instead of using:
writel(param1, &v5param->apicid);
we can use the more natural:
v5param->apicid = param1;
Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Mon, 23 Jan 2012 23:11:27 +0000 (15:11 -0800)]
Merge tag 'pm-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Power management fixes for 3.3
Two fixes for regressions introduced during the merge window, one fix for
a long-standing obscure issue in the computation of hibernate image size
and two small PM documentation fixes.
* tag 'pm-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Sleep: Fix read_unlock_usermodehelper() call.
PM / Hibernate: Rewrite unlock_system_sleep() to fix s2disk regression
PM / Hibernate: Correct additional pages number calculation
PM / Documentation: Fix minor issue in freezing_of_tasks.txt
PM / Documentation: Fix spelling mistake in basic-pm-debugging.txt
Linus Torvalds [Mon, 23 Jan 2012 22:50:30 +0000 (14:50 -0800)]
Merge tag 'arm-soc-imx-move' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Consolidate i.MX 5 platforms to be under the new shared i.MX 3/5/6 tree.
* tag 'arm-soc-imx-move' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM i.MX: Update defconfig
ARM i.MX: Merge i.MX5 support into mach-imx
ARM i.MX5: remove unnecessary includes from board files
Fix up fairly trivial conflicts due to various changes nearby in
arch/arm/{mach,plat}-imx/{Kconfig,Makefile}
Pull request had been sent to the wrong email address, but happened
before the merge window closed. I'm merging the MX 5 consolidation,
since it apparently will help the next development window and will avoid
conflicts later as per Arnd.
Commit b298d289
"PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()"
added read_unlock_usermodehelper() but read_unlock_usermodehelper() is called
without read_lock_usermodehelper() when kmalloc() failed.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Eric Dumazet [Mon, 23 Jan 2012 01:22:09 +0000 (01:22 +0000)]
tg3: fix ipv6 header length computation
tg3_start_xmit() makes the wrong assumption for TSOV6 that skb->head
doesnt include any payload data.
if (skb_is_gso_v6(skb))
hdr_len = skb_headlen(skb) - ETH_HLEN;
This is not true anymore after commit f07d960df3 (tcp: avoid frag
allocation for small frames)
We should instead use : skb_transport_offset(skb) + tcp_hdrlen(skb)
Its also true for IPv4
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This also changes the cleanup logic slightly to aggregate
completed notifications for multiple packets.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paulius Zaleckas [Mon, 23 Jan 2012 01:16:35 +0000 (01:16 +0000)]
mv643xx_eth: Add Rx Discard and Rx Overrun statistics
These statistics helped me a lot while searching who is losing
packets in my setup.
I added these stats to MIB group since they are very similar,
but just in other registers.
I have tested this patch on 88F6281 SoC.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Mon, 23 Jan 2012 07:31:56 +0000 (07:31 +0000)]
bnx2x: fix compilation error with SOE in fw_dump
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Mon, 23 Jan 2012 07:31:55 +0000 (07:31 +0000)]
bnx2x: handle CHIP_REVISION during init_one
The macro `CHIP_IS_E1x' requires `bp' to be initialized.
As `bp' is not yet initialized during this phase of `bnx2x_init_dev',
it accessed uninitialized fields in the struct.
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Mon, 23 Jan 2012 07:31:54 +0000 (07:31 +0000)]
bnx2x: allow user to change ring size in ISCSI SD mode
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Mon, 23 Jan 2012 07:31:53 +0000 (07:31 +0000)]
bnx2x: fix Big-Endianess in ethtool -t
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Mon, 23 Jan 2012 07:31:52 +0000 (07:31 +0000)]
bnx2x: fixed ethtool statistics for MF modes
Previosuly, in MF modes `ethtool -S' lacked some of the statistics
which appeared in non-MF modes. This has been fixed.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Mon, 23 Jan 2012 07:31:51 +0000 (07:31 +0000)]
bnx2x: credit-leakage fixup on vlan_mac_del_all
Upon insertion of elements into the execution queue, it is validated
that there are enough credits to support additional vlan-macs,
and the credits are consumed. However, when removing a pending
command in `bnx2x_vland_mac_del_all' the consumed credits are not
released, which might cause leakage and eventually the inability to
add new vlan-macs in certain scenarios.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 23 Jan 2012 05:38:59 +0000 (05:38 +0000)]
macvlan: fix a possible use after free
Commit bc416d9768 (macvlan: handle fragmented multicast frames) added a
possible use after free in macvlan_handle_frame(), since
ip_check_defrag() uses pskb_may_pull() : skb header can be reallocated.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 23 Jan 2012 18:08:08 +0000 (10:08 -0800)]
Merge branch 'kernel-doc' from Randy Dunlap
The usual kernel-doc fixups from Randy. Some of them David acked as
merged in his tree, this is the random left-overs.
* kernel-doc:
docbook: fix sched source file names in device-drivers book
docbook: change iomap source filename in deviceiobook
docbook: don't use serial_core.h in device-drivers book
kernel-doc: fix kernel-doc warnings in sched
kernel-doc: fix new warnings in cfg80211.h
kernel-doc: fix new warning in usb.h
kernel-doc: fix new warnings in device.h
kernel-doc: fix new warnings in debugfs
kernel-doc: fix new warning in regulator core
kernel-doc: fix new warnings in pci
kernel-doc: fix new warnings in driver-core
kernel-doc: fix new warnings in auditsc.c
scripts/kernel-doc: fix fatal error caused by cfg80211.h
Linus Torvalds [Mon, 23 Jan 2012 17:27:54 +0000 (09:27 -0800)]
Merge branch 'akpm'
Quoth Andrew:
"Random fixes. And a simple new LED driver which I'm trying to sneak
in while you're not looking."
Sneaking successful.
* akpm:
score: fix off-by-one index into syscall table
mm: fix rss count leakage during migration
SHM_UNLOCK: fix Unevictable pages stranded after swap
SHM_UNLOCK: fix long unpreemptible section
kdump: define KEXEC_NOTE_BYTES arch specific for s390x
mm/hugetlb.c: undo change to page mapcount in fault handler
mm: memcg: update the correct soft limit tree during migration
proc: clear_refs: do not clear reserved pages
drivers/video/backlight/l4f00242t03.c: return proper error in l4f00242t03_probe if regulator_get() fails
drivers/video/backlight/adp88x0_bl.c: fix bit testing logic
kprobes: initialize before using a hlist
ipc/mqueue: simplify reading msgqueue limit
leds: add led driver for Bachmann's ot200
mm: __count_immobile_pages(): make sure the node is online
mm: fix NULL ptr dereference in __count_immobile_pages
mm: fix warnings regarding enum migrate_mode
Takashi Iwai [Mon, 23 Jan 2012 17:23:36 +0000 (18:23 +0100)]
ALSA: hda - Fix silent outputs from docking-station jacks of Dell laptops
The recent change of the power-widget handling for IDT codecs caused
the silent output from the docking-station line-out jack. This was
partially fixed by the commit f2cbba7602383cd9cdd21f0a5d0b8bd1aad47b33
"ALSA: hda - Fix the lost power-setup of seconary pins after PM resume".
But the line-out on the docking-station is still silent when booted
with the jack plugged even by this fix.
The remainig bug is that the power-widget is set off in stac92xx_init()
because the pins in cfg->line_out_pins[] aren't checked there properly
but only hp_pins[] are checked in is_nid_hp_pin().
This patch fixes the problem by checking both HP and line-out pins
and leaving the power-map correctly.
Linus Torvalds [Mon, 23 Jan 2012 16:59:49 +0000 (08:59 -0800)]
Merge git://git.samba.org/sfrench/cifs-2.6
* git://git.samba.org/sfrench/cifs-2.6:
CIFS: Rename *UCS* functions to *UTF16*
[CIFS] ACL and FSCACHE support no longer EXPERIMENTAL
[CIFS] Fix build break with multiuser patch when LANMAN disabled
cifs: warn about impending deprecation of legacy MultiuserMount code
cifs: fetch credentials out of keyring for non-krb5 auth multiuser mounts
cifs: sanitize username handling
keys: add a "logon" key type
cifs: lower default wsize when unix extensions are not used
cifs: better instrumentation for coalesce_t2
cifs: integer overflow in parse_dacl()
cifs: Fix sparse warning when calling cifs_strtoUCS
CIFS: Add descriptions to the brlock cache functions
Randy Dunlap [Sat, 21 Jan 2012 19:03:13 +0000 (11:03 -0800)]
kernel-doc: fix kernel-doc warnings in sched
Fix new kernel-doc notation warnings:
Warning(include/linux/sched.h:2094): No description found for parameter 'p'
Warning(include/linux/sched.h:2094): Excess function parameter 'tsk' description in 'is_idle_task'
Warning(kernel/sched/cpupri.c:139): No description found for parameter 'newpri'
Warning(kernel/sched/cpupri.c:139): Excess function parameter 'pri' description in 'cpupri_set'
Warning(kernel/sched/cpupri.c:208): Excess function parameter 'bootmem' description in 'cpupri_init'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 21 Jan 2012 19:03:00 +0000 (11:03 -0800)]
kernel-doc: fix new warnings in cfg80211.h
Fix new kernel-doc warnings:
Warning(include/net/cfg80211.h:1165): No description found for parameter 'channel_type'
Warning(include/net/cfg80211.h:2090): No description found for parameter 'probe_resp_offload'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 21 Jan 2012 19:02:51 +0000 (11:02 -0800)]
kernel-doc: fix new warnings in device.h
Fix new kernel-doc warnings:
Warning(include/linux/device.h:299): No description found for parameter 'name'
Warning(include/linux/device.h:299): No description found for parameter 'subsys'
Warning(include/linux/device.h:299): No description found for parameter 'node'
Warning(include/linux/device.h:299): No description found for parameter 'add_dev'
Warning(include/linux/device.h:299): No description found for parameter 'remove_dev'
Warning(include/linux/device.h:685): No description found for parameter 'id'
Warning(include/linux/device.h:1009): No description found for parameter '__driver'
Warning(include/linux/device.h:1009): No description found for parameter '__register'
Warning(include/linux/device.h:1009): No description found for parameter '__unregister'
Randy Dunlap [Sat, 21 Jan 2012 19:02:42 +0000 (11:02 -0800)]
kernel-doc: fix new warnings in debugfs
Fix new kernel-doc warnings:
Warning(fs/debugfs/file.c:556): No description found for parameter 'nregs'
Warning(fs/debugfs/file.c:556): Excess function parameter 'mregs' description in 'debugfs_print_regs32'
Randy Dunlap [Sat, 21 Jan 2012 19:02:35 +0000 (11:02 -0800)]
kernel-doc: fix new warnings in pci
Fix new kernel-doc warnings:
Warning(drivers/pci/pci.c:2811): No description found for parameter 'dev'
Warning(drivers/pci/pci.c:2811): Excess function parameter 'pdev' description in 'pci_intx_mask_supported'
Warning(drivers/pci/pci.c:2894): No description found for parameter 'dev'
Warning(drivers/pci/pci.c:2894): Excess function parameter 'pdev' description in 'pci_check_and_mask_intx'
Warning(drivers/pci/pci.c:2908): No description found for parameter 'dev'
Warning(drivers/pci/pci.c:2908): Excess function parameter 'pdev' description in 'pci_check_and_unmask_intx'
Randy Dunlap [Sat, 21 Jan 2012 19:02:28 +0000 (11:02 -0800)]
kernel-doc: fix new warnings in driver-core
Fix new kernel-doc warnings:
Warning(drivers/base/bus.c:925): No description found for parameter 'key'
Warning(drivers/base/bus.c:1241): No description found for parameter 'subsys'
Warning(drivers/base/bus.c:1241): No description found for parameter 'groups'
projects / mv-sheeva.git / log