staging: comedi: addi_apci_1564: store PCI BAR 1 base address in private data
According to ADDI-DATA, only the PLD Revision 2.x versions of the APCI-1564
have the 3 counters. The base address for these counters is found in PCI BAR 1.
For aesthetics, save this base address in the private data. The dev->iobase
can then be used for the main registers of the board.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: use correct I/O base for APCI1564_DI_INT_STATUS_REG
The APCI1564_DI_INT_STATUS_REG is located in the PCI BAR 0 I/O space. That
base address is stored in devpriv->amcc_iobase. Use that to correctly read
the register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: board does not use an AMCC PCI controller
According to ADDI-DATA, the APCI-1564 board has a FPGA with a PCI core, it
does not use an AMCC PCI controller chip.
Remove the amcc_s5933.h include as well as the read of the AMCC_OP_REG_INTCSR
register. That offset would actually read APCI1564_WDOG_STATUS_REG register
in the FPGA which has nothing to do with the interrupt status.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A rather obvious typo in one of the identifier has been found. This patch
fixes the typo and ensures any lines changed do not exceed 80 characters
as indicated by scripts/checkpatch.pl
Signed-off-by: Krzysztof Konopko <kris@konagma.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_led.* files include Free Software Foundation's mailing address in
the sample GPL notice. This is not desired and picked when running
scripts/checkpatch.pl.
Signed-off-by: Krzysztof Konopko <kris@konagma.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Elfring [Mon, 24 Nov 2014 21:58:48 +0000 (22:58 +0100)]
staging: olpc_dcon: Deletion of a check before backlight_device_unregister()
The backlight_device_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Fri, 7 Nov 2014 20:44:58 +0000 (22:44 +0200)]
staging: octeon-ethernet: drop multiple NAPI instances
Octeon Ethernet driver is currently trying to wake up multiple
CPU cores for parallel NAPI processing when needed, to cope
with the fact that all network interfaces are handled through
the same receive queue processed by a single core/interrupt
(see http://marc.info/?l=linux-kernel&m=137209784914565&w=2).
This partially overlaps with generic RPS functionality.
Commit a6a39a7fcff5 ("staging: octeon-ethernet: disable load balance
for receiving packet when CONFIG_RPS is enabled") already disabled this
when RPS is enabled. Let's delete this code altogether as it has issues
like packet reordering and potential problems with CPU offlining/onlining.
Tested on EdgeRouter Lite.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-By: David Daney <david.daney@cavium.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Ruprecht [Sun, 23 Nov 2014 13:37:51 +0000 (14:37 +0100)]
staging: lustre: ldlm: Fix indentation errors for switch-case
checkpatch complains about two indentation errors where the case
statements are on a higher indentation level than the corresponding
switch statement. This patch removes these errors.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Ruprecht [Sun, 23 Nov 2014 13:37:49 +0000 (14:37 +0100)]
staging: lustre: ldlm: Fix overlong lines
checkpatch complains about a number of lines which are over the
80 character line limit. This patch changes most of them to comply,
the few remaining lines with warnings are not changed for readability
reasons.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleh Suprunovich [Mon, 17 Nov 2014 10:22:41 +0000 (13:22 +0300)]
staging: rtl8723au: fix sparse warning
drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c:747:1: warning: symbol
'rtl8723a_EfusePgPacketRead' was not declared. Should it be static?
Function 'rtl8723a_EfusePgPacketRead' seems to be unused in current
staging code.
Before, it was available as 'static s32 Hal_EfusePgPacketRead',
but code that was using it removed, in the same commit as rename and
signature change to 'bool rtl8723a_EfusePgPacketRead' has taken place.
staging: lustre: Fix sparse warnings for lnet/lnet/router.c
Fix the following sparse errors:
drivers/staging/lustre/lnet/lnet/router.c:756:1: warning: symbol 'lnet_wait_known_routerstate' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:788:1: warning: symbol 'lnet_update_ni_status_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:828:1: warning: symbol 'lnet_destroy_rc_data' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:848:16: warning: symbol 'lnet_create_rc_data_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1228:1: warning: symbol 'lnet_destroy_rtrbuf' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1238:15: warning: symbol 'lnet_new_rtrbuf' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1274:1: warning: symbol 'lnet_rtrpool_free_bufs' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1303:1: warning: symbol 'lnet_rtrpool_alloc_bufs' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/router.c:1337:1: warning: symbol 'lnet_rtrpool_init' was not declared. Should it be static?
Juston Li [Wed, 19 Nov 2014 01:03:51 +0000 (17:03 -0800)]
staging: lustre: mdc: use __FMODE_EXEC macro
FMODE_EXEC is type fmode_t but is used in operations
with integers which leads to sparse warnings:
drivers/staging/lustre/lustre/mdc/mdc_lib.c:198:21: warning: restricted fmode_t degrades to integer
drivers/staging/lustre/lustre/mdc/mdc_locks.c:300:49: warning: restricted fmode_t degrades to integer
Fix by using __FMODE_EXEC macro defined in fs.h.
Note the same warnings occurs with other fmode flags
here but they don't have a corresponding int macro.
Changes since v1:
remove ifdefs. FMODE_EXEC and __FMODE_EXEC should
always be defined in fs.h
Signed-off-by: Juston Li <juston.h.li@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Domagoj Trsan [Mon, 17 Nov 2014 08:44:56 +0000 (09:44 +0100)]
staging: skein: fix sparse warnings related to shift operator
Fix warnings:
drivers/staging/skein/skein_base.h:89:30: warning: shift too big (50) for type int
...
drivers/staging/skein/skein_base.h:89:30: warning: shift too big (39)for type int
drivers/staging/skein/skein_base.h:89:19: warning: too many warnings
Chen Gang [Sun, 9 Nov 2014 03:54:06 +0000 (11:54 +0800)]
drivers: staging: lustre: Kconfig: Let LUSTRE_LLITE_LLOOP depend on all !"*_64K*" page
It does not support 64K page, so let it disabled for 64K page under all
architectures. The related error (with allmodconfig under tile):
CC [M] drivers/staging/lustre/lustre/llite/lloop.o
In file included from drivers/staging/lustre/lustre/llite/../include/../../include/linux/libcfs/libcfs.h:160:0,
from drivers/staging/lustre/lustre/llite/../include/lustre_lib.h:52,
from drivers/staging/lustre/lustre/llite/lloop.c:106:
drivers/staging/lustre/lustre/llite/lloop.c: In function 'loop_set_fd':
drivers/staging/lustre/lustre/llite/../include/../../include/linux/libcfs/libcfs_private.h:411:54: error: duplicate case value
#define CLASSERT(cond) do {switch (42) {case (cond): case 0: break; } } while (0)
^
drivers/staging/lustre/lustre/llite/lloop.c:525:2: note: in expansion of macro 'CLASSERT'
CLASSERT(PAGE_CACHE_SIZE < (1 << (sizeof(unsigned short) * 8)));
^
drivers/staging/lustre/lustre/llite/../include/../../include/linux/libcfs/libcfs_private.h:411:41: error: previously used here
#define CLASSERT(cond) do {switch (42) {case (cond): case 0: break; } } while (0)
^
drivers/staging/lustre/lustre/llite/lloop.c:525:2: note: in expansion of macro 'CLASSERT'
CLASSERT(PAGE_CACHE_SIZE < (1 << (sizeof(unsigned short) * 8)));
^
Use "find ./ | grep Kconfig | xargs grep --color 64K" to find all 64K
page macros.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niklas Svensson [Sat, 8 Nov 2014 15:49:18 +0000 (16:49 +0100)]
staging: skein: fixed sparse warnings related to static declarations
drivers/staging/skein/skein_generic.c:30:5: warning: symbol 'skein256_update' was not declared. Should it be static?
drivers/staging/skein/skein_generic.c:65:5: warning: symbol 'skein512_update' was not declared. Should it be static?
drivers/staging/skein/skein_generic.c:100:5: warning: symbol 'skein1024_update' was not declared. Should it be static?
Signed-off-by: Niklas Svensson <nks@flawful.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 9 Nov 2014 22:49:56 +0000 (14:49 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- enable bpf syscall for compat
- cpu_suspend fix when checking the idle state type
- defconfig update
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: update defconfig for 3.18
arm64: compat: Enable bpf syscall
arm64: psci: fix cpu_suspend to check idle state type for index
Linus Torvalds [Sun, 9 Nov 2014 22:46:36 +0000 (14:46 -0800)]
Merge tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another quiet week:
- a fix to silence edma probe error on non-supported platforms from
Arnd
- a fix to enable the PL clock for Parallella, to make mainline
usable with the SDK.
- a somewhat verbose fix for the PLL clock tree on VF610
- enabling of SD/MMC on one of the VF610-based boards (for testing)
- a fix for i.MX where CONFIG_SPI used to be implicitly enabled and
now needs to be added to the defconfig instead
- another maintainer added for bcm2835: Lee Jones"
* tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: zynq: Enable PL clocks for Parallella
dma: edma: move device registration to platform code
ARM: dts: vf610: add SD node to cosmic dts
MAINTAINERS: update bcm2835 entry
ARM: imx: Fix the removal of CONFIG_SPI option
ARM: imx: clk-vf610: define PLL's clock tree
Linus Torvalds [Sun, 9 Nov 2014 22:30:24 +0000 (14:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"It's a one liner for an error cleanup path that leads to crashes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
Linus Torvalds [Sun, 9 Nov 2014 22:11:58 +0000 (14:11 -0800)]
Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 tiny fixes for 3.18-rc4.
One fixes up a long-stading race condition in the driver core for
removing directories in /sys/devices/virtual/ and the other 2 fix up
the wording of a new Kconfig option that was added in 3.18-rc1"
* tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
tiny: reverse logic for DISABLE_DEV_COREDUMP
sysfs: driver core: Fix glue dir race condition by gdp_mutex
Linus Torvalds [Sun, 9 Nov 2014 22:11:07 +0000 (14:11 -0800)]
Merge tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging/iio fixes for 3.18-rc4.
Nothing major, just a few bugfixes of things that have been reported"
* tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging:iio:ade7758: Remove "raw" from channel name
staging:iio:ade7758: Fix check if channels are enabled in prenable
staging:iio:ade7758: Fix NULL pointer deref when enabling buffer
iio: as3935: allocate correct iio_device size
io: accel: kxcjk-1013: Fix iio_event_spec direction
iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined
iio: adc: mxs-lradc: Disable the clock on probe failure
iio: st_sensors: Fix buffer copy
staging:iio:ad5933: Drop "raw" from channel names
staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
Linus Torvalds [Sun, 9 Nov 2014 22:07:30 +0000 (14:07 -0800)]
Merge tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some
reported issues"
* tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix pty master poll() after slave closes v2
serial: of-serial: fix uninitialized kmalloc variable
tty/vt: don't set font mappings on vc not supporting this
tty: serial: 8250_mtk: Fix quot calculation
tty: Prevent "read/write wait queue active!" log flooding
tty: Fix high cpu load if tty is unreleaseable
serial: Fix divide-by-zero fault in uart_get_divisor()
Linus Torvalds [Sun, 9 Nov 2014 22:05:53 +0000 (14:05 -0800)]
Merge tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 3.18-rc4.
Just a bunch of little fixes resolving reported issues and new device
ids for existing drivers. Full details are in the shortlog"
* tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: Update default usb-storage delay_use value in kernel-parameters.txt
USB: cdc-acm: add quirk for control-line state requests
phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly
USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init()
USB: cdc-acm: only raise DTR on transitions from B0
Revert "storage: Replace magic number with define in usb_stor_euscsi_init()"
usb: core: notify disconnection when core detects disconnect
usb: core: need to call usb_phy_notify_connect after device setup
uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models
xhci: no switching back on non-ULT Haswell
USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen
USB: quirks: enable device-qualifier quirk for another Elan touchscreen
MAINTAINERS: Remove duplicate entry for usbip driver
usb: storage: fix build warnings !CONFIG_PM
usb: Remove references to non-existent PLAT_S5P symbol
uas: Add NO_ATA_1X for VIA VL711 devices
xhci: Disable streams on Asmedia 1042 xhci controllers
USB: HWA: fix a warning message
uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model
usb-storage: handle a skipped data phase
...
Andreas Färber [Thu, 6 Nov 2014 17:22:10 +0000 (18:22 +0100)]
ARM: dts: zynq: Enable PL clocks for Parallella
The Parallella board comes with a U-Boot bootloader that loads one of
two predefined FPGA bitstreams before booting the kernel. Both define an
AXI interface to the on-board Epiphany processor.
Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
Otherwise accessing, e.g., the ESYSRESET register freezes the board,
as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.
Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sat, 8 Nov 2014 17:32:29 +0000 (09:32 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c bugfixes from Wolfram Sang:
"One bigger cleanup (FSF address removal) and two bugfixes for I2C"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Dispose OF IRQ mapping at client removal time
i2c: at91: don't account as iowait
i2c: remove FSF address
Pull media fixes from Mauro Carvalho Chehab:
"For:
- some regression fixes at the Remote Controller core and imon driver
- a build fix for certain randconfigs with ir-hix5hd2
- don't feed power to satellite system at ds3000 driver init
It also contains some fixes for drivers added for Kernel 3.18:
- some fixes at the new ISDB-S driver, and the corresponding bits to
fix some descriptors for this Japanese TV standard at the DVB core
- two warning cleanups for sp2 driver if PM is disabled
- change the default mode for the new vivid driver"
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] sp2: sp2_init() can be static
[media] dvb:tc90522: fix always-false expression
[media] dvb-core: set default properties of ISDB-S
[media] dvb:tc90522: fix stats report
[media] vivid: default to single planar device instances
[media] imon: fix other RC type protocol support
[media] ir-hix5hd2 fix build warning
[media] ds3000: fix LNB supply voltage on Tevii S480 on initialization
[media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding
[media] rc-core: fix protocol_change regression in ir_raw_event_register
Linus Torvalds [Sat, 8 Nov 2014 02:08:02 +0000 (18:08 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This weeks' round of MIPS bug fixes for 3.18:
- wire up the bpf syscall
- fix TLB dump output for R3000 class TLBs
- fix strnlen_user return value if no NUL character was found.
- fix build with binutils 2.24.51+. While there is no binutils 2.25
release yet, toolchains derived from binutils 2.24.51+ are already
in common use.
- the Octeon GPIO code forgot to offline GPIO IRQs.
- fix build error for XLP.
- fix possible BUG assertion with EVA for CMA"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Fix build with binutils 2.24.51+
MIPS: R3000: Fix debug output for Virtual page number
MIPS: Fix strnlen_user() return value in case of overlong strings.
MIPS: CMA: Do not reserve memory if not required
MIPS: Wire up bpf syscall.
MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
Linus Torvalds [Fri, 7 Nov 2014 22:08:13 +0000 (14:08 -0800)]
Merge tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This update fixes a warning in the new pagecache_isize_extended() and
updates some related comments, another fix for zero-range
misbehaviour, and an unforntuately large set of fixes for regressions
in the bulkstat code.
The bulkstat fixes are large but necessary. I wouldn't normally push
such a rework for a -rcX update, but right now xfsdump can silently
create incomplete dumps on 3.17 and it's possible that even xfsrestore
won't notice that the dumps were incomplete. Hence we need to get
this update into 3.17-stable kernels ASAP.
In more detail, the refactoring work I committed in 3.17 has exposed a
major hole in our QA coverage. With both xfsdump (the major user of
bulkstat) and xfsrestore silently ignoring missing files in the
dump/restore process, incomplete dumps were going unnoticed if they
were being triggered. Many of the dump/restore filesets were so small
that they didn't evenhave a chance of triggering the loop iteration
bugs we introduced in 3.17, so we didn't exercise the code
sufficiently, either.
We have already taken steps to improve QA coverage in xfstests to
avoid this happening again, and I've done a lot of manual verification
of dump/restore on very large data sets (tens of millions of inodes)
of the past week to verify this patch set results in bulkstat behaving
the same way as it does on 3.16.
Unfortunately, the fixes are not exactly simple - in tracking down the
problem historic API warts were discovered (e.g xfsdump has been
working around a 20 year old bug in the bulkstat API for the past 10
years) and so that complicated the process of diagnosing and fixing
the problems. i.e. we had to fix bugs in the code as well as
discover and re-introduce the userspace visible API bugs that we
unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly.
Summary:
- incorrect warnings about i_mutex locking in pagecache_isize_extended()
and updates comments to match expected locking
- another zero-range bug fix for stray file size updates
- a bunch of fixes for regression in the bulkstat code introduced in
3.17"
* tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: track bulkstat progress by agino
xfs: bulkstat error handling is broken
xfs: bulkstat main loop logic is a mess
xfs: bulkstat chunk-formatter has issues
xfs: bulkstat chunk formatting cursor is broken
xfs: bulkstat btree walk doesn't terminate
mm: Fix comment before truncate_setsize()
xfs: rework zero range to prevent invalid i_size updates
mm: Remove false WARN_ON from pagecache_isize_extended()
xfs: Check error during inode btree iteration in xfs_bulkstat()
xfs: bulkstat doesn't release AGI buffer on error
Linus Torvalds [Fri, 7 Nov 2014 19:55:47 +0000 (11:55 -0800)]
Merge tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"More changes than I'd like here, most of them for a single bug
repeated in a bunch of drivers with data not being initialized
correctly, plus a fix to lower the severity of a warning introduced in
the last merge window which can legitimately go off so we don't want
to alarm users excessively"
* tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mpa01: zero-initialize regulator match table array
regulator: max8660: zero-initialize regulator match table array
regulator: max77802: zero-initialize regulator match table
regulator: max77686: zero-initialize regulator match table
regulator: max1586: zero-initialize regulator match table array
regulator: max77693: Fix use of uninitialized regulator config
regulator: of: Lower the severity of the error with no container
Linus Torvalds [Fri, 7 Nov 2014 19:54:44 +0000 (11:54 -0800)]
Merge tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi bugfixes from Mark Brown:
"A couple of small driver fixes for v3.18, both quite problematic if
you hit a use case that's affected"
* tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM
spi: fsl-dspi: Fix CTAR selection
Johannes Berg [Thu, 30 Oct 2014 09:00:35 +0000 (10:00 +0100)]
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
The ENABLE_DEV_COREDUMP option is misleading as it implies that
it gets the framework enabled, this isn't true it just allows it
to get enabled if a driver needs it.
Rename it to ALLOW_DEV_COREDUMP to better capture its semantics.
Aristeu Rozanski [Thu, 16 Oct 2014 15:49:49 +0000 (11:49 -0400)]
tiny: reverse logic for DISABLE_DEV_COREDUMP
It's desirable for allnconfig and tinyconfig targets to result in the
least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to
switch off DEV_COREDUMP regardless if any drivers select
WANT_DEV_COREDUMP.
This patch renames the option to ENABLE_DEV_COREDUMP and setting it to
'n' (as in allnconfig or tinyconfig) will effectively disable device
coredump.
Sudip Mukherjee [Fri, 7 Nov 2014 11:20:46 +0000 (16:50 +0530)]
staging: rtl8188eu: unneeded NULL check
before these NULL checks we are already checking it for NULL, and if
it is NULL then we are jumping to the error label and handling
the error before returning.
So we can reach this part of the code only if the variable is known
to be not NULL, and if we already know that it is not NULL, then no
need to check it again.
Sudip Mukherjee [Fri, 7 Nov 2014 11:20:45 +0000 (16:50 +0530)]
staging: rtl8188eu: unneeded return variable
a variable is declared and initialized and then never updated in the
function.This default value is then used as the return from the
function.
So removed that unneeded return variable and returning that default
initial value directly.
projects / karo-tx-linux.git / log