]> git.karo-electronics.de Git - karo-tx-uboot.git/log
karo-tx-uboot.git
8 years agodefconfig: dra74_evm: enable eth driver model
Mugunthan V N [Thu, 28 Apr 2016 10:06:13 +0000 (15:36 +0530)]
defconfig: dra74_evm: enable eth driver model

Enable eth driver model for dra74_evm as cpsw supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agodefconfig: am437x_sk_evm: enable eth driver model
Mugunthan V N [Thu, 28 Apr 2016 10:06:12 +0000 (15:36 +0530)]
defconfig: am437x_sk_evm: enable eth driver model

Enable eth driver model for am437x_sk_evm as cpsw supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agodefconfig: am437x_gp_evm: enable eth driver model
Mugunthan V N [Thu, 28 Apr 2016 10:06:11 +0000 (15:36 +0530)]
defconfig: am437x_gp_evm: enable eth driver model

Enable eth driver model for am437x_gp_evm as cpsw supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agoarm: dts: dra7: fix ethernet name with proper device address
Mugunthan V N [Thu, 28 Apr 2016 10:06:10 +0000 (15:36 +0530)]
arm: dts: dra7: fix ethernet name with proper device address

Fix typo error for cpsw device name with proper device address

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agoarm: dts: dra7: add syscon node to cpsw to read mac address
Mugunthan V N [Thu, 28 Apr 2016 10:06:09 +0000 (15:36 +0530)]
arm: dts: dra7: add syscon node to cpsw to read mac address

Add syscon node to cpsw device node to read mac address
from efuse.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agoarm: dts: am4372: add syscon node to cpsw to read mac address
Mugunthan V N [Thu, 28 Apr 2016 10:06:08 +0000 (15:36 +0530)]
arm: dts: am4372: add syscon node to cpsw to read mac address

Add syscon node to cpsw device node to read mac address
from efuse.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agodrivers: net: cpsw: add support for reading mac address from efuse
Mugunthan V N [Thu, 28 Apr 2016 10:06:07 +0000 (15:36 +0530)]
drivers: net: cpsw: add support for reading mac address from efuse

Different TI platforms has to read with different combination to
get the mac address from efuse. So add support to read mac address
based on machine/device compatibles.

The code is taken from Linux drivers/net/ethernet/ti/cpsw-common.c
done by Tony Lindgren.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agodrivers: net: cpsw: fix get mdio base and gmii_sel reg from DT
Mugunthan V N [Thu, 28 Apr 2016 10:06:06 +0000 (15:36 +0530)]
drivers: net: cpsw: fix get mdio base and gmii_sel reg from DT

Since dra7x platforms address bus is define as 64 bits to support
LAPE, fdtdec_get_addr() returns a invalid address for mdio based
and gmii_sel register address. Fixing this by using
fdtdec_get_addr_size_auto_noparent() which will derive address
cell and size cell from its parent.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agoARM: omap5: add platform specific ethernet phy modes configurations
Mugunthan V N [Thu, 28 Apr 2016 10:06:05 +0000 (15:36 +0530)]
ARM: omap5: add platform specific ethernet phy modes configurations

Add platforms specific phy mode configuration bits to be used
to configure phy mode in control module.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agodrivers: net: cpsw: fix cpsw dp parse when num slaves as 1
Mugunthan V N [Thu, 28 Apr 2016 10:06:04 +0000 (15:36 +0530)]
drivers: net: cpsw: fix cpsw dp parse when num slaves as 1

On some boards number of slaves can be 1 when only one port
ethernet is pinned out. So do not break when slave_index and
num slaves check fails, instead continue to parse the next
child.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agoti_omap5_common: eth: do not define DM_ETH for spl
Mugunthan V N [Thu, 28 Apr 2016 10:06:03 +0000 (15:36 +0530)]
ti_omap5_common: eth: do not define DM_ETH for spl

Since omap's spl doesn't support DM currently, do not define
DM_ETH for spl build.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agodrivers: core: device: add support to check dt compatible for a device/machine
Mugunthan V N [Thu, 28 Apr 2016 10:06:02 +0000 (15:36 +0530)]
drivers: core: device: add support to check dt compatible for a device/machine

Provide an api to check whether the given device or machine is
compatible with the given compat string which helps in making
decisions in drivers based on device or machine compatible.

Idea taken from Linux.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agonet: phy: Add PHY driver for mv88e61xx switches
Kevin Smith [Thu, 31 Mar 2016 19:33:12 +0000 (19:33 +0000)]
net: phy: Add PHY driver for mv88e61xx switches

The previous mv88e61xx driver was a driver for configuring the
switch, but did not integrate with the PHY/networking system, so
it could not be used as a PHY by U-boot.  This is a complete
rework to support this device as a PHY.

Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agonet: Remove unused mv88e61xx switch driver
Kevin Smith [Thu, 31 Mar 2016 19:33:12 +0000 (19:33 +0000)]
net: Remove unused mv88e61xx switch driver

No boards are using this driver.  Remove in preparation for a new
driver with integrated PHY support.

Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
8 years agoMerge branch 'master' of git://git.denx.de/u-boot-mips
Tom Rini [Sat, 21 May 2016 00:43:27 +0000 (20:43 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mips

8 years agoARM: fix ifdef in ARMv8 lowlevel_init() again
Masahiro Yamada [Fri, 20 May 2016 03:13:10 +0000 (12:13 +0900)]
ARM: fix ifdef in ARMv8 lowlevel_init() again

Commit 116611937faa ("ARM: fix ifdefs in ARMv8 lowlevel_init()")
accidentally inverted the logic of CONFIG_ARMV8_MULTIENTRY.

Fixes: 116611937faa ("ARM: fix ifdefs in ARMv8 lowlevel_init()")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
8 years agoSPL: fat: Fix spl_parse_image_header() return value handling
Tom Rini [Mon, 23 May 2016 15:51:13 +0000 (11:51 -0400)]
SPL: fat: Fix spl_parse_image_header() return value handling

The spl_parse_image_header() can return 0 and it is not an error.
Only treat non-zero return value as an error.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
8 years agoomap3: Fix SPI registers on am33xx and am43xx
Martin Hejnfelt [Thu, 19 May 2016 07:11:58 +0000 (09:11 +0200)]
omap3: Fix SPI registers on am33xx and am43xx

When the base registers are read from device tree the base is not
0x48030100 as the driver expects, but 0x48030000, resulting in
non functioning SPI. To deal with this, use same idea as how this
is done in the linux kernel (drivers/spi/spi-omap2-mcspi.c) and
add a structure with a field that is used to shift the registers
on these systems.

v2: Fixed commit subject line to correct cpu

Signed-off-by: Martin Hejnfelt <mh@newtec.dk>
8 years agokbuild: fixdep: Check fstat(2) return value
Tom Rini [Fri, 13 May 2016 14:54:04 +0000 (10:54 -0400)]
kbuild: fixdep: Check fstat(2) return value

Coverity has recently added a check that will find when we don't check
the return code from fstat(2).  Copy/paste the checking logic that
print_deps() has with an appropriate re-wording of the perror() message.

[ Linux commit : 46fe94ad18aa7ce6b3dad8c035fb538942020f2b ]

Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
8 years agospl: Setup default value for OF_LIST
Michal Simek [Wed, 4 May 2016 13:14:11 +0000 (15:14 +0200)]
spl: Setup default value for OF_LIST

OF_LIST can't remain empty that's why setup it up to default DTB.

If it is empty u-boot.img is created without FDT partition:
For example:
  ./tools/mkimage -f auto -A arm -T firmware -C none -O u-boot -a
0x8000000 -e 0 -n "U-Boot 2016.05-rc3 ..." -E -b  -d u-boot-nodtb.bin u-boot.img
Can't set 'timestamp' property for '' node (FDT_ERR_NOSPACE)
FIT description: Firmware image with one or more FDT blobs
Created:         Wed May  4 15:02:52 2016
 Image 0 (firmware@1)
  Description:  U-Boot 2016.05-rc3-00080-gff2e12ae22a8-dirty for zynqmp
board
  Created:      Wed May  4 15:02:52 2016
  Type:         Firmware
  Compression:  uncompressed
  Data Size:    unavailable
  Architecture: ARM
  Load Address: 0x08000000
 Default Configuration: 'conf@1'
 Configuration 0 (conf@1)
  Description:  unavailable
  Kernel:       unavailable

And then image like this doesn't contain description and link to FDT and
can't boot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
8 years agospl: fit: Print error message when FDT is not present
Michal Simek [Wed, 4 May 2016 13:08:00 +0000 (15:08 +0200)]
spl: fit: Print error message when FDT is not present

When FDT is not present in the image user doesn't get any error what's
wrong. Print error message if LIBCOMMON_SUPPORT is enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Seris-cc: uboot
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
8 years agomkimage: Add a quiet mode
Simon Glass [Sun, 1 May 2016 19:55:38 +0000 (13:55 -0600)]
mkimage: Add a quiet mode

Some build systems want to be quiet unless there is a problem. At present
mkimage displays quite a bit of information when generating a FIT file. Add
a '-q' flag to silence this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
8 years agoimage-fit: Don't display an error in fit_set_timestamp()
Simon Glass [Sun, 1 May 2016 19:55:37 +0000 (13:55 -0600)]
image-fit: Don't display an error in fit_set_timestamp()

This function returns an error code and its caller may be able to fix the
error. For example fit_handle_file() expands the device tree to fit if there
is a lack of space.

In this case the caller does not want an error displayed. It is confusing,
since it suggests that something is wrong, when it fact everything is fine.
Drop the error.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agomalloc: improve memalign fragmentation fix
Stephen Warren [Mon, 25 Apr 2016 21:55:42 +0000 (15:55 -0600)]
malloc: improve memalign fragmentation fix

Commit 4f144a416469 "malloc: work around some memalign fragmentation
issues" enhanced memalign() so that it can succeed in more cases where
heap fragmentation is present. However, it did not solve as many cases
as it could. This patch enhances the code to cover more cases.

The alignment code works by allocating more space than the user requests,
then adjusting the returned pointer to achieve alignment. In general, one
must allocate "alignment" bytes more than the user requested in order to
guarantee that alignment is possible. This is what the original code does.
The previous enhancement attempted a second allocation if the padded
allocation failed, and succeeded if that allocation just happened to be
aligned; a fluke that happened often in practice. There are still cases
where this could fail, yet where it is still possible to honor the user's
allocation request. In particular, if the heap contains a free region that
is large enough for the user's request, and for leading padding to ensure
alignment, but has no or little space for any trailing padding. In this
case, we can make a third(!) allocation attempt after calculating exactly
the size of the leading padding required to achieve alignment, which is
the minimal over-allocation needed for the overall memalign() operation to
succeed if the third and second allocations end up at the same location.

This patch isn't checkpatch-clean, since it conforms to the existing
coding style in dlmalloc.c, which is different to the rest of U-Boot.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
8 years agopico-imx6ul: Select CONFIG_HUSH_PARSER option
Fabio Estevam [Tue, 17 May 2016 13:51:44 +0000 (10:51 -0300)]
pico-imx6ul: Select CONFIG_HUSH_PARSER option

Select CONFIG_HUSH_PARSER option in order to fix the following
problem:

Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'

Reported-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Daiane Angolini <daiane.angolini@nxp.com>
8 years agoeeprom: merge cmdline parsing of eeprom commands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:13 +0000 (17:55 +0300)]
eeprom: merge cmdline parsing of eeprom commands

Merge the parsing of layout aware and layout unaware eeprom commands into
one parsing function. With this change, layout aware commands now follow
the eeprom read and eeprom write conventions of making i2c bus and i2c address
parameters optional.

Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoeeprom: use eeprom_execute_command for all eeprom functions
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:12 +0000 (17:55 +0300)]
eeprom: use eeprom_execute_command for all eeprom functions

Update eeprom_execute_command() and related code to accommodate both layout
aware and layout unaware functions.

No functional changes.

Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
[trini: Make eeprom_execute_command have ulong for i2c_addr]
Signed-off-by: Tom Rini <trini@konsulko.com>
8 years agomalta: Support MIPS32r6 configurations
Paul Burton [Mon, 16 May 2016 09:52:14 +0000 (10:52 +0100)]
malta: Support MIPS32r6 configurations

Both real Malta boards & QEMU's Malta emulation can feature MIPS32r6
CPUs. Allow building U-Boot for such systems by selecting
CONFIG_SUPPORTS_CPU_MIPS32_R6 for Malta.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
8 years agomalta: Remove ".set mips32" directive
Paul Burton [Mon, 16 May 2016 09:52:13 +0000 (10:52 +0100)]
malta: Remove ".set mips32" directive

We always build for a mips32 or higher ISA, so this ".set mips32"
directive is redundant. Once MIPSr6 support is added it will become
harmful since some instruction encodings change & this directive will
cause the older encodings to be incorrectly emitted instead of the
appropriate ones for the build.

In preparation for supporting MIPSr6, remove this redundant directive.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
8 years agoMIPS: Support for targetting MIPSr6
Paul Burton [Mon, 16 May 2016 09:52:12 +0000 (10:52 +0100)]
MIPS: Support for targetting MIPSr6

Add support for targetting MIPS32r6 & MIPS64r6 systems, in the same way
that we currently select release 1 or release 2 targets. MIPSr6 is not
entirely backwards compatible with earlier releases of the architecture.
Some instructions are encoded differently, some are removed, some are
reused, so it is not practical to run U-Boot built for earlier revisions
on a MIPSr6 system. Update their Kconfig help text to reflect that.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
8 years agoMIPS: Simplify CONFIG_SYS_CPU values
Paul Burton [Mon, 16 May 2016 09:52:11 +0000 (10:52 +0100)]
MIPS: Simplify CONFIG_SYS_CPU values

Rather than having the values for CONFIG_SYS_CPU depend upon each
architecture revision, have them depend upon the more general
CONFIG_CPU_MIPS32 & CONFIG_CPU_MIPS64 which in turn depend upon the
architecture revisions.

This is done in preparation for adding MIPSr6 support, which would
otherwise need to introduce new cases here.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
8 years agoMIPS: Use unchecked immediate addition/subtraction
Paul Burton [Mon, 16 May 2016 09:52:10 +0000 (10:52 +0100)]
MIPS: Use unchecked immediate addition/subtraction

In MIPS assembly there have historically been 2 variants of immediate
addition - the standard "addi" which traps if an overflow occurs, and
the unchecked "addiu" which does not trap on overflow. In release 6 of
the MIPS architecture the trapping variants of immediate addition &
subtraction have been removed. In preparation for supporting MIPSr6,
stop using the trapping instructions from assembly & switch to their
unchecked variants.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
8 years agomips: ath79: Add support for TPLink WDR4300
Marek Vasut [Fri, 6 May 2016 18:10:41 +0000 (20:10 +0200)]
mips: ath79: Add support for TPLink WDR4300

Add support for the TPLink WDR4300 router, which is based on the
AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported
on this system as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: Add AR934x support
Marek Vasut [Fri, 6 May 2016 18:10:40 +0000 (20:10 +0200)]
mips: ath79: Add AR934x support

Add support for the Atheros AR934x WiSoCs. This patchs adds complete
system init, including PLL and DRAM init, both of which happen from
full C environment, since the AR934x has proper SRAM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: Add support for ungating ethernet on ar933x and ar934x
Marek Vasut [Fri, 6 May 2016 18:10:39 +0000 (20:10 +0200)]
mips: ath79: Add support for ungating ethernet on ar933x and ar934x

Add code to ungate the ethernet controller on ar933x and ar934x .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: dts: Add ethernet MAC nodes for ar933x
Marek Vasut [Fri, 6 May 2016 18:10:38 +0000 (20:10 +0200)]
mips: ath79: dts: Add ethernet MAC nodes for ar933x

Add node for both ethernet controllers in the ar933x.
The PHY is attached only to the first ethernet controller.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: Add support for ungating USB on ar933x and ar934x
Marek Vasut [Fri, 6 May 2016 18:10:37 +0000 (20:10 +0200)]
mips: ath79: Add support for ungating USB on ar933x and ar934x

Add code to ungate the USB controller on ar933x and ar934x .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: dts: Add generic-ehci node
Marek Vasut [Fri, 6 May 2016 18:10:36 +0000 (20:10 +0200)]
mips: ath79: dts: Add generic-ehci node

Add generic EHCI node for the ChipIdea EHCI controller in the ath79.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: Fix compiler warning on const assignment
Marek Vasut [Fri, 6 May 2016 18:10:35 +0000 (20:10 +0200)]
mips: ath79: Fix compiler warning on const assignment

The assignment const T var; var = value; is illegal, since var is
constant. Drop the const to fix the compiler warning.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: Fix ar71xx_regs.h indent
Marek Vasut [Fri, 6 May 2016 18:10:34 +0000 (20:10 +0200)]
mips: ath79: Fix ar71xx_regs.h indent

The indent in this file triggers my OCD, so fix it. Replace multiple
spaces with tabs and align the values in one column.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
8 years agomips: Add MIPS 74Kc tune
Marek Vasut [Fri, 6 May 2016 18:10:33 +0000 (20:10 +0200)]
mips: Add MIPS 74Kc tune

Add MIPS 74Kc tune Kconfig option.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
[added missing tune-y entry in arch/mips/Makefile]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
8 years agomips: Fix compiler warning in cpu.c
Marek Vasut [Thu, 5 May 2016 18:14:00 +0000 (20:14 +0200)]
mips: Fix compiler warning in cpu.c

There really is zero reason for including netdev.h in generic mips CPU code.
Removing the netdev.h from cpu.c also fixes the following compiler warning:

In file included from arch/mips/cpu/cpu.c:10:0:
include/netdev.h:204:41: warning: 'struct eth_device' declared inside parameter list [enabled by default]
 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
                                         ^
include/netdev.h:204:41: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
8 years agoath79: add readonly attribute for ath79_soc_desc
Wills Wang [Tue, 12 Apr 2016 10:24:10 +0000 (18:24 +0800)]
ath79: add readonly attribute for ath79_soc_desc

use 'const' keywork to qualify readonly attribute for lookup-table member

Signed-off-by: Wills Wang <wills.wang@live.com>
8 years agoath79: ar933x: use BIT macro for bit shift operation
Wills Wang [Tue, 12 Apr 2016 03:09:20 +0000 (11:09 +0800)]
ath79: ar933x: use BIT macro for bit shift operation

used a uniform BIT macro for register bit-field shift

Signed-off-by: Wills Wang <wills.wang@live.com>
8 years agoar933x: serial: Remove the explicit pinctrl setting
Wills Wang [Tue, 12 Apr 2016 03:09:19 +0000 (11:09 +0800)]
ar933x: serial: Remove the explicit pinctrl setting

The correct pinctrl is handled automatically so we don't need to do it in
the driver.

Signed-off-by: Wills Wang <wills.wang@live.com>
8 years agoath79: spi: Remove the explicit pinctrl setting
Wills Wang [Tue, 12 Apr 2016 03:09:18 +0000 (11:09 +0800)]
ath79: spi: Remove the explicit pinctrl setting

The correct pinctrl is handled automatically so we don't need to do it in
the driver.

Signed-off-by: Wills Wang <wills.wang@live.com>
8 years agomips: Report reloc information in bdinfo
Tim Chick [Thu, 31 Mar 2016 11:51:20 +0000 (12:51 +0100)]
mips: Report reloc information in bdinfo

Signed-off-by: Tim Chick <tim.chick@mediatek.com>
8 years agodrivers: mtd: add Microchip PIC32 internal non-CFI flash driver.
Purna Chandra Mandal [Fri, 18 Mar 2016 13:06:08 +0000 (18:36 +0530)]
drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.

PIC32 internal flash devices are parallel NOR flash divided into
number of banks to allow erase-programming in one while fetch and
execution continues on other. As the flash banks are memory mapped
stored code can be executed directly from flash (XIP), also there
is additional hardware logic to prefetch and cache contents to
improve execution performance. These flash can also be used to
store user data (like environment).
Flash erase and programming are handled by on-chip NVM controller.

Driver implemented driver model but MTD is not really support.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
8 years agoflash: add device ID for Microchip PIC32 internal flash.
Purna Chandra Mandal [Fri, 18 Mar 2016 13:06:07 +0000 (18:36 +0530)]
flash: add device ID for Microchip PIC32 internal flash.

Microchip PIC32 has internal parallel flash (non-CFI compliant).
These flash devices do not support any identifier command so no
standard IDs. Added unique IDs to seperate these flash devices
from others supported by U-Boot.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
8 years agomips: ath79: add AP143 reference board
Wills Wang [Wed, 16 Mar 2016 09:00:00 +0000 (17:00 +0800)]
mips: ath79: add AP143 reference board

This patch add board-level code and base DT for AP143.

Signed-off-by: Wills Wang <wills.wang@live.com>
[updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
8 years agomips: ath79: add AP121 reference board
Wills Wang [Wed, 16 Mar 2016 08:59:59 +0000 (16:59 +0800)]
mips: ath79: add AP121 reference board

This patch add board-level code and base DT for AP121.

Signed-off-by: Wills Wang <wills.wang@live.com>
[updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
8 years agodrivers: spi: add spi support for QCA/Atheros ath79 SOCs
Wills Wang [Wed, 16 Mar 2016 08:59:58 +0000 (16:59 +0800)]
drivers: spi: add spi support for QCA/Atheros ath79 SOCs

This patch add a compatible spi driver for ath79 series SOC.

Signed-off-by: Wills Wang <wills.wang@live.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
8 years agodrivers: serial: add serial driver for ar933x SOC
Wills Wang [Wed, 16 Mar 2016 08:59:57 +0000 (16:59 +0800)]
drivers: serial: add serial driver for ar933x SOC

This patch add support for ar933x serial.

Signed-off-by: Wills Wang <wills.wang@live.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
8 years agodrivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros qca953x.
Wills Wang [Wed, 16 Mar 2016 08:59:56 +0000 (16:59 +0800)]
drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros qca953x.

This is a simple pinctrl driver, it just support uart and spi pin-mux now.

Signed-off-by: Wills Wang <wills.wang@live.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[fixed typo in commit subject line]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
8 years agodrivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros ar933x.
Wills Wang [Wed, 16 Mar 2016 08:59:55 +0000 (16:59 +0800)]
drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros ar933x.

This is a simple pinctrl driver, it just support uart and spi pin-mux now.

Signed-off-by: Wills Wang <wills.wang@live.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[fixed typo in commit subject line]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
8 years agomips: ath79: add support for QCA953x SOCs
Wills Wang [Wed, 16 Mar 2016 08:59:54 +0000 (16:59 +0800)]
mips: ath79: add support for QCA953x SOCs

This patch enable work for qca953x SOC.

Signed-off-by: Wills Wang <wills.wang@live.com>
8 years agomips: ath79: add support for AR933x SOCs
Wills Wang [Wed, 16 Mar 2016 08:59:53 +0000 (16:59 +0800)]
mips: ath79: add support for AR933x SOCs

This patch enable work for ar933x SOC.

Signed-off-by: Wills Wang <wills.wang@live.com>
8 years agomips: add base support for QCA/Atheros ath79 SOCs
Wills Wang [Wed, 16 Mar 2016 08:59:52 +0000 (16:59 +0800)]
mips: add base support for QCA/Atheros ath79 SOCs

This patch add some common code for QCA/Atheros ath79 SOCs such as
DDR tuning, chip reset and CPU detection.

Signed-off-by: Wills Wang <wills.wang@live.com>
8 years agoAdd support for 64-bit MIPS to examples/standalone
Stanislav Galabov [Wed, 17 Feb 2016 13:23:33 +0000 (15:23 +0200)]
Add support for 64-bit MIPS to examples/standalone

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
8 years agoFix FreeBSD loader API so that it works on both 32-bit and 64-bit targets.
Stanislav Galabov [Wed, 17 Feb 2016 13:23:31 +0000 (15:23 +0200)]
Fix FreeBSD loader API so that it works on both 32-bit and 64-bit targets.

Specifically tested on MIPS under QEMU (works with all  combination of bit-ness and endian-ness)

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
8 years agoUse CONFIG_IDE_SWAP_IO when running on big-endian MIPS (32 or 64-bit) in QEMU so...
Stanislav Galabov [Wed, 17 Feb 2016 13:23:30 +0000 (15:23 +0200)]
Use CONFIG_IDE_SWAP_IO when running on big-endian MIPS (32 or 64-bit) in QEMU so that IDE transfers work properly

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
8 years agoProperly calculate ATA_SECTORWORDS, using a fixed-size integer, so it works for both...
Stanislav Galabov [Wed, 17 Feb 2016 13:23:29 +0000 (15:23 +0200)]
Properly calculate ATA_SECTORWORDS, using a fixed-size integer, so it works for both 32-bit and 64-bit targets

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
8 years agoeeprom: refactor i2c bus and devaddr parsing
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:11 +0000 (17:55 +0300)]
eeprom: refactor i2c bus and devaddr parsing

Introduce parse_i2c_bus_addr() to generalize the parsing of i2c bus number and
i2c device address. This is done in preparation for merging layout aware and
layout unaware command parsing into one function.

No functional changes.

Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoarm: cm-t43: add support for eeprom layout comands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:10 +0000 (17:55 +0300)]
arm: cm-t43: add support for eeprom layout comands

Add support for EEPROM and EEPROM layout commands for CM-T43.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoarm: cm-t35: add support for eeprom layout comands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:09 +0000 (17:55 +0300)]
arm: cm-t35: add support for eeprom layout comands

Add support for EEPROM and EEPROM layout commands for CM-T35.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoarm: cm-t3517: add support for eeprom layout comands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:08 +0000 (17:55 +0300)]
arm: cm-t3517: add support for eeprom layout comands

Add support for EEPROM and EEPROM layout commands for CM-T3517.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoarm: cm-t54: add support for eeprom layout comands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:07 +0000 (17:55 +0300)]
arm: cm-t54: add support for eeprom layout comands

Add support for EEPROM and EEPROM layout commands for CM-T54.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoarm: cm-t335: add support for eeprom layout comands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:06 +0000 (17:55 +0300)]
arm: cm-t335: add support for eeprom layout comands

Add support for EEPROM and EEPROM layout commands for CM-T335.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoarm: cm-fx6: add support for eeprom layout comands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:05 +0000 (17:55 +0300)]
arm: cm-fx6: add support for eeprom layout comands

Add support for EEPROM and EEPROM layout commands for CM-FX6.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agocompulab: add support for layout aware eeprom commands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:04 +0000 (17:55 +0300)]
compulab: add support for layout aware eeprom commands

Add layout definitions and implement functions for field printing/updating,
layout detection, layout assignment, and layout parsing.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agocmd: eeprom: add support for layout aware commands
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:03 +0000 (17:55 +0300)]
cmd: eeprom: add support for layout aware commands

Introduce the (optional) eeprom print and eeprom update commands.

These commands are eeprom layout aware:
* The eeprom print command prints the contents of the eeprom in a human
  readable way (eeprom layout fields, and data formatted to be fit for human
  consumption).
* The eeprom update command allows user to update eeprom fields by specifying
  the field name, and providing the new data in a human readable format (same
  format as displayed by the eeprom print command).
* Both commands can either auto detect the layout, or be told which layout to
  use.

New CONFIG options:
CONFIG_CMD_EEPROM_LAYOUT - enables commands.
CONFIG_EEPROM_LAYOUT_HELP_STRING - tells user what layout names are supported

Feature API:
__weak int parse_layout_version(char *str)
- override to provide your own layout name parsing
__weak void __eeprom_layout_assign(struct eeprom_layout *layout, int layout_version);
- override to setup the layout metadata based on the version
__weak int eeprom_layout_detect(unsigned char *data)
- override to provide your own algorithm for detecting layout version
eeprom_field.c
- contains various printing and updating functions for common types of
  eeprom fields. Can be used for defining custom layouts.

Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agocmd: eeprom: add bus switching support for all i2c drivers
Nikita Kiryanov [Sat, 16 Apr 2016 14:55:02 +0000 (17:55 +0300)]
cmd: eeprom: add bus switching support for all i2c drivers

The i2c_init function is always provided when CONFIG_SYS_I2C is
defined. No need to limit ourselves to just one supported I2C driver
(soft_i2c). Update the #ifdef conditions to support bus switching for
all I2C drivers.

Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
8 years agoarm: mvebu: theadorable: Enable CONFIG_ZERO_BOOTDELAY_CHECK
Stefan Roese [Wed, 13 Apr 2016 09:02:20 +0000 (11:02 +0200)]
arm: mvebu: theadorable: Enable CONFIG_ZERO_BOOTDELAY_CHECK

Enable bootdelay 0 check so that booting can be interrupted even with
bootdelay configured to 0.

Signed-off-by: Stefan Roese <sr@denx.de>
8 years agoarm: mvebu: a38x: Weed out floating point use
Marek Vasut [Sat, 30 Apr 2016 12:45:42 +0000 (14:45 +0200)]
arm: mvebu: a38x: Weed out floating point use

For reason unknown, recently, the DDR init code writers are really fond
of hiding some small floating point operating deep in their creations.
This patch removes one from the Marvell A38x code.

Instead of returning size of chip as float from ddr3_get_device_size()
in GiB units, return it as int in MiB units. Since this would interfere
with the huge switch code in ddr3_calc_mem_cs_size(), rework the code
to match the change.

Before this patch, the cs_mem_size variable could have these values:
 ( { 16, 32 } x { 8, 16 } x { 0.01, 0.5, 1, 2, 4, 8 } ) / 8 =
   { 0.000000, 0.001250, 0.002500, 0.005000, 0.062500, 0.125000,
     0.250000, 0.500000, 1.000000, 2.000000, 4.000000, }
The switch code checked for a subset of the resulting RAM sizes, which
is in range 128 MiB ... 2048 MiB.

With this patch, the cs_mem_size variable can have these values:
 ( { 16, 32 } x { 8, 16 } x { 0, 512, 1024, 2048, 4096, 8192 } ) / 8 =
   { 0, 64, 128, 256, 512, 1024, 2048, 4096 }
To retain previous behavior, filter out 0 MiB (invalid size), 64 MiB
and 4096 MiB options.

Removing the floating point stuff also saves 1.5k from text segment:
  clearfog       :  spl/u-boot-spl:all -1592  spl/u-boot-spl:text -1592

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
8 years agoMerge git://git.denx.de/u-boot-dm
Tom Rini [Tue, 17 May 2016 17:58:27 +0000 (13:58 -0400)]
Merge git://git.denx.de/u-boot-dm

8 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-imx
Tom Rini [Tue, 17 May 2016 16:10:35 +0000 (12:10 -0400)]
Merge branch 'master' of git://www.denx.de/git/u-boot-imx

8 years agodm: mmc: test: Add tests for MMC
Simon Glass [Sun, 1 May 2016 19:52:44 +0000 (13:52 -0600)]
dm: mmc: test: Add tests for MMC

Add a simple test which checks that a sandbox-emulated SD card can be used
correctly. This tests plumbing through the MMC stack's block-device
implementaion.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: sandbox: mmc: Enable building MMC code for sandbox
Simon Glass [Sun, 1 May 2016 19:52:43 +0000 (13:52 -0600)]
dm: sandbox: mmc: Enable building MMC code for sandbox

Enable building the MMC code for sandbox. This increases build
coverage for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: sandbox: Add an SD-card emulation
Simon Glass [Sun, 1 May 2016 19:52:42 +0000 (13:52 -0600)]
dm: mmc: sandbox: Add an SD-card emulation

Add an emulation of an SD card to sandbox, allowing MMC to be used in tests.
The emulation is very simple, supporting only card detection and reading
test data.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Add support for driver-model block devices
Simon Glass [Sun, 1 May 2016 19:52:41 +0000 (13:52 -0600)]
dm: mmc: Add support for driver-model block devices

Add support for enabling CONFIG_BLK with MMC. This involves changing a
few functions to use struct udevice and adding a MMC block device driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Add a way to bind MMC devices with driver model
Simon Glass [Sun, 1 May 2016 19:52:40 +0000 (13:52 -0600)]
dm: mmc: Add a way to bind MMC devices with driver model

Binding an MMC device when CONFIG_BLK is enabled requires that a block
device be bound as a child of the MMC device. Add a function to do this.
The mmc_create() method will be used only when DM_BLK is disabled.

Add an unbind method also.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Implement the MMC functions for block devices
Simon Glass [Sun, 1 May 2016 19:52:39 +0000 (13:52 -0600)]
dm: mmc: Implement the MMC functions for block devices

Implement the functions in mmc_legacy.c for driver-model block devices, so
that MMC can use driver model for these. This allows CONFIG_BLK to be enabled
with DM_MMC.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: sandbox: Only enable the sandbox MMC driver when valid
Simon Glass [Sun, 1 May 2016 19:52:38 +0000 (13:52 -0600)]
dm: sandbox: Only enable the sandbox MMC driver when valid

This driver will require generic MMC and block-device support in a future
commit. To avoid test errors, make this change now.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Adjust mmc_switch_part() to use a struct mmc
Simon Glass [Sun, 1 May 2016 19:52:37 +0000 (13:52 -0600)]
dm: mmc: Adjust mmc_switch_part() to use a struct mmc

Instead of looking up the MMC device by number, just pass it in. This makes
it possible to use this function with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: blk: Use the correct error code for blk_get_device_by_str()
Simon Glass [Sun, 1 May 2016 19:52:36 +0000 (13:52 -0600)]
dm: blk: Use the correct error code for blk_get_device_by_str()

Return -EINVAL instead of -1 in this function, to provide a more meaningful
error.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Move the device list into a separate file
Simon Glass [Sun, 1 May 2016 19:52:35 +0000 (13:52 -0600)]
dm: mmc: Move the device list into a separate file

At present the MMC subsystem maintains its own list of MMC devices. This
cannot work with driver model, which needs to maintain this itself. Move the
list code into a separate 'legacy' file. The core MMC code remains, and will
be shared with the driver-model implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Set up the device pointer when using the MMC uclass
Simon Glass [Sun, 1 May 2016 19:52:34 +0000 (13:52 -0600)]
dm: mmc: Set up the device pointer when using the MMC uclass

Update the existing drivers to set up this new pointer. This will be required
by the MMC uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: blk: Add a comment as to why the bdev member is needed
Simon Glass [Sun, 1 May 2016 19:52:33 +0000 (13:52 -0600)]
dm: blk: Add a comment as to why the bdev member is needed

This member should be explained, since it is not obvious why it is needed.
Add a comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: part: Drop the block_drvr table
Simon Glass [Sun, 1 May 2016 19:52:32 +0000 (13:52 -0600)]
dm: part: Drop the block_drvr table

This is not needed since we can use the functions provided by the legacy
block device support.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: part: Use the legacy block driver for hardware partition support
Simon Glass [Sun, 1 May 2016 19:52:31 +0000 (13:52 -0600)]
dm: part: Use the legacy block driver for hardware partition support

Drop use of the table in part.c for this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: blk: Add functions to select a hardware partition
Simon Glass [Sun, 1 May 2016 19:52:30 +0000 (13:52 -0600)]
dm: blk: Add functions to select a hardware partition

The block device uclass does not currently support selecting a particular
hardware partition but this is needed for MMC. Add it so that the blk API
can support MMC properly.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Use the new select_hwpart() API
Simon Glass [Sun, 1 May 2016 19:52:29 +0000 (13:52 -0600)]
dm: mmc: Use the new select_hwpart() API

Avoid calling directly into the MMC code - use the new API call instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: spl: Use the legacy block interface in SPL
Simon Glass [Sun, 1 May 2016 19:52:28 +0000 (13:52 -0600)]
dm: mmc: spl: Use the legacy block interface in SPL

Bring this in for SPL so that we can use generic code for loading from
block devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Add a function to obtain the block device
Simon Glass [Sun, 1 May 2016 19:52:27 +0000 (13:52 -0600)]
dm: mmc: Add a function to obtain the block device

The MMC block device is contained within struct mmc. But with driver model
this will not be the case. Add a function to obtain the block device. We
can later implement this for CONFIG_BLK.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Implement the select_hwpart() method
Simon Glass [Sun, 1 May 2016 19:52:26 +0000 (13:52 -0600)]
dm: mmc: Implement the select_hwpart() method

Implement this method so that hardware partitions will work correctly with
MMC.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: mmc: Move mmc_switch_part() above its callers
Simon Glass [Sun, 1 May 2016 19:52:25 +0000 (13:52 -0600)]
dm: mmc: Move mmc_switch_part() above its callers

This function is defined after it is used. In preparation for making it
static, move it up a little. Also drop the printf() which should not appear
in a driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: blk: Free the block device name when unbound
Simon Glass [Sun, 1 May 2016 19:52:24 +0000 (13:52 -0600)]
dm: blk: Free the block device name when unbound

Mark the device name as allocated so that it will be freed correctly when the
device is unbound.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: core: Allow device names to be freed automatically
Simon Glass [Sun, 1 May 2016 19:52:23 +0000 (13:52 -0600)]
dm: core: Allow device names to be freed automatically

Some devices have a name that is stored in allocated memory. At present
there is no mechanism to free this memory when the device is unbound.

Add a device flag to track whether a name is allocated and a function to
add the flag. Free the memory when the device is unbound.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: blk: Fix allocation of block-device numbering
Simon Glass [Sun, 1 May 2016 19:52:22 +0000 (13:52 -0600)]
dm: blk: Fix allocation of block-device numbering

Due to code ordering the block devices are not numbered sequentially. Fix
this.

Signed-off-by: Simon Glass <sjg@chromium.org>
8 years agodm: sandbox: Enable systemace
Simon Glass [Sun, 1 May 2016 17:36:32 +0000 (11:36 -0600)]
dm: sandbox: Enable systemace

Enable building the systemace code for sandbox. This increases build
coverage for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>