Alexander Graf [Wed, 24 Mar 2010 20:48:37 +0000 (21:48 +0100)]
KVM: PPC: Disable MSR_FEx for Cell hosts
Cell can't handle MSR_FE0 and MSR_FE1 too well. It gets dog slow.
So let's just override the guest whenever we see one of the two and mask them
out. See commit ddf5f75a16b3e7460ffee881795aa168dffcd0cf for reference.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:36 +0000 (21:48 +0100)]
KVM: PPC: Make bools bitfields
Bool defaults to at least byte width. We usually only want to waste a single
bit on this. So let's move all the bool values to bitfields, potentially
saving memory.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:32 +0000 (21:48 +0100)]
KVM: PPC: Fix dcbz emulation
On most systems we need to emulate dcbz when running 32 bit guests. So
far we've been rather slack, not giving correct DSISR values to the guest.
This patch makes the emulation more accurate, introducing a difference
between "page not mapped" and "write protection fault". While at it, it
also speeds up dcbz emulation by an order of magnitude by using kmap.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:29 +0000 (21:48 +0100)]
KVM: Add support for enabling capabilities per-vcpu
Some times we don't want all capabilities to be available to all
our vcpus. One example for that is the OSI interface, implemented
in the next patch.
In order to have a generic mechanism in how to enable capabilities
individually, this patch introduces a new ioctl that can be used
for this purpose. That way features we don't want in all guests or
userspace configurations can just not be enabled and we're good.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:28 +0000 (21:48 +0100)]
KVM: PPC: Implement alignment interrupt
Mac OS X has some applications - namely the Finder - that require alignment
interrupts to work properly. So we need to implement them.
But the spec for 970 and 750 also looks different. While 750 requires the
DSISR and DAR fields to reflect some instruction bits (DSISR) and the fault
address (DAR), the 970 declares this as an optional feature. So we need
to reconstruct DSISR and DAR manually.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:26 +0000 (21:48 +0100)]
KVM: PPC: Make XER load 32 bit
We have a 32 bit value in the PACA to store XER in. We also do an stw
when storing XER in there. But then we load it with ld, completely
screwing it up on every entry.
Welcome to the Big Endian world.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:24 +0000 (21:48 +0100)]
KVM: PPC: Implement mfsr emulation
We emulate the mfsrin instruction already, that passes the SR number
in a register value. But we lacked support for mfsr that encoded the
SR number in the opcode.
So let's implement it.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:22 +0000 (21:48 +0100)]
KVM: PPC: Don't reload FPU with invalid values
When the guest activates the FPU, we load it up. That's fine when
it wasn't activated before on the host, but if it was we end up
reloading FPU values from last time the FPU was deactivated on the
host without writing the proper values back to the vcpu struct.
This patch checks if the FPU is enabled already and if so just doesn't
bother activating it, making FPU operations survive guest context switches.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:21 +0000 (21:48 +0100)]
KVM: PPC: Split instruction reading out
The current check_ext function reads the instruction and then does
the checking. Let's split the reading out so we can reuse it for
different functions.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Wed, 24 Mar 2010 20:48:17 +0000 (21:48 +0100)]
KVM: PPC: Ensure split mode works
On PowerPC we can go into MMU Split Mode. That means that either
data relocation is on but instruction relocation is off or vice
versa.
That mode didn't work properly, as we weren't always flushing
entries when going into a new split mode, potentially mapping
different code or data that we're supposed to.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Sun, 14 Mar 2010 08:16:40 +0000 (10:16 +0200)]
KVM: MMU: Disassociate direct maps from guest levels
Direct maps are linear translations for a section of memory, used for
real mode or with large pages. As such, they are independent of the guest
levels.
Teach the mmu about this by making page->role.glevels = 0 for direct maps.
This allows direct maps to be shared among real mode and the various paging
modes.
Gleb Natapov [Sun, 21 Mar 2010 11:08:21 +0000 (13:08 +0200)]
KVM: x86 emulator: add decoding of CMPXCHG8B dst operand
Decode CMPXCHG8B destination operand in decoding stage. Fixes regression
introduced by "If LOCK prefix is used dest arg should be memory" commit.
This commit relies on dst operand be decoded at the beginning of an
instruction emulation.
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Gleb Natapov [Thu, 18 Mar 2010 13:20:26 +0000 (15:20 +0200)]
KVM: x86 emulator: restart string instruction without going back to a guest.
Currently when string instruction is only partially complete we go back
to a guest mode, guest tries to reexecute instruction and exits again
and at this point emulation continues. Avoid all of this by restarting
instruction without going back to a guest mode, but return to a guest
mode each 1024 iterations to allow interrupt injection. Pending
exception causes immediate guest entry too.
Gleb Natapov [Thu, 18 Mar 2010 13:20:24 +0000 (15:20 +0200)]
KVM: x86 emulator: Move string pio emulation into emulator.c
Currently emulation is done outside of emulator so things like doing
ins/outs to/from mmio are broken it also makes it hard (if not impossible)
to implement single stepping in the future. The implementation in this
patch is not efficient since it exits to userspace for each IO while
previous implementation did 'ins' in batches. Further patch that
implements pio in string read ahead address this problem.
Gleb Natapov [Thu, 18 Mar 2010 13:20:23 +0000 (15:20 +0200)]
KVM: x86 emulator: fix in/out emulation.
in/out emulation is broken now. The breakage is different depending
on where IO device resides. If it is in userspace emulator reports
emulation failure since it incorrectly interprets kvm_emulate_pio()
return value. If IO device is in the kernel emulation of 'in' will do
nothing since kvm_emulate_pio() stores result directly into vcpu
registers, so emulator will overwrite result of emulation during
commit of shadowed register.
Gleb Natapov [Thu, 18 Mar 2010 13:20:21 +0000 (15:20 +0200)]
KVM: x86 emulator: add decoding of X,Y parameters from Intel SDM
Add decoding of X,Y parameters from Intel SDM which are used by string
instruction to specify source and destination. Use this new decoding
to implement movs, cmps, stos, lods in a generic way.
Gleb Natapov [Thu, 18 Mar 2010 13:20:20 +0000 (15:20 +0200)]
KVM: x86 emulator: populate OP_MEM operand during decoding.
All struct operand fields are initialized during decoding for all
operand types except OP_MEM, but there is no reason for that. Move
OP_MEM operand initialization into decoding stage for consistency.
Gleb Natapov [Thu, 18 Mar 2010 13:20:09 +0000 (15:20 +0200)]
KVM: x86 emulator: 0f (20|21|22|23) ignore mod bits.
Resent spec says that for 0f (20|21|22|23) the 2 bits in the mod field
are ignored. Interestingly enough older spec says that 11 is only valid
encoding.
Gleb Natapov [Thu, 18 Mar 2010 13:20:03 +0000 (15:20 +0200)]
KVM: Provide callback to get/set control registers in emulator ops.
Use this callback instead of directly call kvm function. Also rename
realmode_(set|get)_cr to emulator_(set|get)_cr since function has nothing
to do with real mode.
kvm_coalesced_mmio_init() keeps to hold the addresses of a coalesced
mmio ring page and dev even after it has freed them.
Also, if this function fails, though it might be rare, it seems to be
suggesting the system's serious state: so we'd better stop the works
following the kvm_creat_vm().
This patch clears these problems.
We move the coalesced mmio's initialization out of kvm_create_vm().
This seems to be natural because it includes a registration which
can be done only when vm is successfully created.
Avi Kivity [Mon, 15 Mar 2010 11:59:57 +0000 (13:59 +0200)]
KVM: MMU: Reinstate pte prefetch on invlpg
Commit fb341f57 removed the pte prefetch on guest invlpg, citing guest races.
However, the SDM is adamant that prefetch is allowed:
"The processor may create entries in paging-structure caches for
translations required for prefetches and for accesses that are a
result of speculative execution that would never actually occur
in the executed code path."
And, in fact, there was a race in the prefetch code: we picked up the pte
without the mmu lock held, so an older invlpg could install the pte over
a newer invlpg.
Reinstate the prefetch logic, but this time note whether another invlpg has
executed using a counter. If a race occured, do not install the pte.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Mon, 15 Mar 2010 11:59:56 +0000 (13:59 +0200)]
KVM: MMU: Do not instantiate nontrapping spte on unsync page
The update_pte() path currently uses a nontrapping spte when a nonpresent
(or nonaccessed) gpte is written. This is fine since at present it is only
used on sync pages. However, on an unsync page this will cause an endless
fault loop as the guest is under no obligation to invlpg a gpte that
transitions from nonpresent to present.
Needed for the next patch which reinstates update_pte() on invlpg.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Mon, 15 Mar 2010 11:59:55 +0000 (13:59 +0200)]
KVM: Don't follow an atomic operation by a non-atomic one
Currently emulated atomic operations are immediately followed by a non-atomic
operation, so that kvm_mmu_pte_write() can be invoked. This updates the mmu
but undoes the whole point of doing things atomically.
Fix by only performing the atomic operation and the mmu update, and avoiding
the non-atomic write.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Mon, 15 Mar 2010 11:59:54 +0000 (13:59 +0200)]
KVM: Make locked operations truly atomic
Once upon a time, locked operations were emulated while holding the mmu mutex.
Since mmu pages were write protected, it was safe to emulate the writes in
a non-atomic manner, since there could be no other writer, either in the
guest or in the kernel.
These days emulation takes place without holding the mmu spinlock, so the
write could be preempted by an unshadowing event, which exposes the page
to writes by the guest. This may cause corruption of guest page tables.
Fix by using an atomic cmpxchg for these operations.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avi Kivity [Mon, 15 Mar 2010 11:59:53 +0000 (13:59 +0200)]
KVM: MMU: Consolidate two guest pte reads in kvm_mmu_pte_write()
kvm_mmu_pte_write() reads guest ptes in two different occasions, both to
allow a 32-bit pae guest to update a pte with 4-byte writes. Consolidate
these into a single read, which also allows us to consolidate another read
from an invlpg speculating a gpte into the shadow page table.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Wei Yongjun [Fri, 12 Mar 2010 02:11:15 +0000 (10:11 +0800)]
KVM: ia64: fix the error of ioctl KVM_IRQ_LINE if no irq chip
If no irq chip in kernel, ioctl KVM_IRQ_LINE will return -EFAULT.
But I see in other place such as KVM_[GET|SET]IRQCHIP, -ENXIO is
return. So this patch used -ENXIO instead of -EFAULT.
Wei Yongjun [Fri, 12 Mar 2010 02:09:45 +0000 (10:09 +0800)]
KVM: x86: fix the error of ioctl KVM_IRQ_LINE if no irq chip
If no irq chip in kernel, ioctl KVM_IRQ_LINE will return -EFAULT.
But I see in other place such as KVM_[GET|SET]IRQCHIP, -ENXIO is
return. So this patch used -ENXIO instead of -EFAULT.
Wei Yongjun [Fri, 12 Mar 2010 00:45:39 +0000 (08:45 +0800)]
KVM: ia64: fix the error code of ioctl KVM_IA64_VCPU_GET_STACK failure
The ioctl KVM_IA64_VCPU_GET_STACK does not set the error code if
copy_to_user() fail, and 0 will be return, we should use -EFAULT
instead of 0 in this case, so this patch fixed it.
Joerg Roedel [Mon, 1 Mar 2010 14:34:39 +0000 (15:34 +0100)]
KVM; SVM: Add correct handling of nested iopm
This patch adds the correct handling of the nested io
permission bitmap. Old behavior was to not lookup the port
in the iopm but only reinject an io intercept to the guest.
Joerg Roedel [Mon, 1 Mar 2010 14:34:38 +0000 (15:34 +0100)]
KVM: SVM: Use svm_msrpm_offset in nested_svm_exit_handled_msr
There is a generic function now to calculate msrpm offsets.
Use that function in nested_svm_exit_handled_msr() remove
the duplicate logic (which had a bug anyway).
Joerg Roedel [Mon, 1 Mar 2010 14:34:37 +0000 (15:34 +0100)]
KVM: SVM: Optimize nested svm msrpm merging
This patch optimizes the way the msrpm of the host and the
guest are merged. The old code merged the 2 msrpm pages
completly. This code needed to touch 24kb of memory for that
operation. The optimized variant this patch introduces
merges only the parts where the host msrpm may contain zero
bits. This reduces the amount of memory which is touched to
48 bytes.
Joerg Roedel [Mon, 1 Mar 2010 14:34:36 +0000 (15:34 +0100)]
KVM: SVM: Introduce direct access msr list
This patch introduces a list with all msrs a guest might
have direct access to and changes the svm_vcpu_init_msrpm
function to use this list.
It also adds a check to set_msr_interception which triggers
a warning if a developer changes a msr intercept that is not
in the list.
Joerg Roedel [Mon, 1 Mar 2010 14:34:34 +0000 (15:34 +0100)]
KVM: SVM: Return correct values in nested_svm_exit_handled_msr
The nested_svm_exit_handled_msr() returned an bool which is
a bug. I worked by accident because the exected integer
return values match with the true and false values. This
patch changes the return value to int and let the function
return the correct values.
Joerg Roedel [Wed, 24 Feb 2010 17:59:19 +0000 (18:59 +0100)]
KVM: SVM: Clear exit_info for injected INTR exits
When injecting an vmexit.intr into the nested hypervisor
there might be leftover values in the exit_info fields.
Clear them to not confuse nested hypervisors.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Then we get an cr0 write intercept which is handled on the
host. But that intercepts may actually be a selective cr0
intercept for the guest. This patch checks for this
condition and injects a selective cr0 intercept if needed.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Wed, 24 Feb 2010 17:59:17 +0000 (18:59 +0100)]
KVM: x86: Don't set arch.cr0 in kvm_set_cr0
The vcpu->arch.cr0 variable is already set in the
architecture specific set_cr0 callbacks. There is no need to
set it in the common code.
This allows the architecture code to keep the old arch.cr0
value if it wants. This is required for nested svm to decide
if a selective_cr0 exit needs to be injected.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
projects / linux-beck.git / log