Markus Grabner [Sat, 10 Dec 2011 01:12:32 +0000 (02:12 +0100)]
staging: line6: fixed ALSA/PCM interaction
The PCM subsystem in the Line6 driver is mainly used for PCM playback and
capture by ALSA, but also has other tasks, most notably providing a
low-latency software monitor for devices which don't support hardware
monitoring (e.g., the TonePort series). This patch makes ALSA "play nicely"
with the other components, i.e., prevents it from resetting the isochronous
USB transfer while other PCM tasks (software monitoring) are running.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stefan Hajnoczi [Sat, 10 Dec 2011 01:12:31 +0000 (02:12 +0100)]
staging: line6: wait for urbs in snd_line6_prepare()
The .trigger() pcm callbacks are not allowed to block and cannot wait
until urbs have completed. We need to ensure that stopping, preparing,
and then restarting a stream always works.
Currently the driver will sometimes return -EBUSY when restarting the
stream because urbs have not completed yet. This can be triggered by
jackd from userspace.
The solution is to wait on urbs in the .prepare() pcm callback since
blocking is allowed in that callback. This guarantees that all urbs are
quiesced and ready to be submitted when the start trigger callback is
invoked.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stefan Hajnoczi [Sat, 10 Dec 2011 01:12:30 +0000 (02:12 +0100)]
staging: line6: eliminate useless NULL checks
The line6 driver checks struct field addresses for NULL where it does
not make sense to do so. The struct has already been checked for NULL
and there is no value in checking the first field's address too.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Playback urbs use the index_out counter to decide which part of the
playback buffer to use. Since the urb already has a unique index in
range [0, LINE6_ISO_BUFFERS) there is no need to keep a separate
counter.
Use the urb index instead. This also eliminates the possibility of two
urbs using the same playback buffer space if they ever complete
out-of-order for some reason.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
However, we're lucky that LINE6_ISO_PACKETS is currently defined as 1 so
this patch does not change any behavior. It's still worth including
this fix in case the LINE6_ISO_PACKETS value is changed in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Fri, 2 Dec 2011 19:56:25 +0000 (11:56 -0800)]
net/hyperv: Fix the stop/wake queue mechanism
The ring buffer is only used to pass meta data for outbound packets. The
actual payload is accessed by DMA from the host. So the stop/wake queue
mechanism based on counting and comparing number of pages sent v.s. number
of pages in the ring buffer is wrong. Also, there is a race condition in
the stop/wake queue calls, which can stop xmit queue forever.
The new stop/wake queue mechanism is based on the actual bytes used by
outbound packets in the ring buffer. The check for number of outstanding
sends after stop queue prevents the race condition that can cause wake
queue happening earlier than stop queue.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reported-by: Long Li <longli@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Fri, 9 Dec 2011 22:45:44 +0000 (14:45 -0800)]
Merge git://git.samba.org/sfrench/cifs-2.6
* git://git.samba.org/sfrench/cifs-2.6:
cifs: check for NULL last_entry before calling cifs_save_resume_key
cifs: attempt to freeze while looping on a receive attempt
cifs: Fix sparse warning when calling cifs_strtoUCS
CIFS: Add descriptions to the brlock cache functions
Linus Torvalds [Fri, 9 Dec 2011 22:45:12 +0000 (14:45 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, efi: Calling __pa() with an ioremap()ed address is invalid
x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
x86/intel_mid: Kconfig select fix
x86/intel_mid: Fix the Kconfig for MID selection
Linus Torvalds [Fri, 9 Dec 2011 22:41:50 +0000 (14:41 -0800)]
Merge branch 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6
* 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6:
spi/gpio: fix section mismatch warning
spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build
spi/nuc900: Include linux/module.h
spi/ath79: fix compile error due to missing include
Linus Torvalds [Fri, 9 Dec 2011 16:18:08 +0000 (08:18 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: raid5 crash during degradation
md/raid5: never wait for bad-block acks on failed device.
md: ensure new badblocks are handled promptly.
md: bad blocks shouldn't cause a Blocked status on a Faulty device.
md: take a reference to mddev during sysfs access.
md: refine interpretation of "hold_active == UNTIL_IOCTL".
md/lock: ensure updates to page_attrs are properly locked.
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: use new generic {enable,disable}_percpu_irq() routines
drivers/net/ethernet/tile: use skb_frag_page() API
asm-generic/unistd.h: support new process_vm_{readv,write} syscalls
arch/tile: fix double-free bug in homecache_free_pages()
arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.
Linus Torvalds [Fri, 9 Dec 2011 16:07:42 +0000 (08:07 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix lost speaker volume controls
ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins
ALSA: hda/realtek - Don't create extra controls with channel suffix
ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes
ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs
ASoC: Provide a more complete DMA driver stub
ASoC: Remove references to corgi and spitz from machine driver document
ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C
ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700
ASoC: uda1380: Return proper error in uda1380_modinit failure path
ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C
ASoC: Mark WM8994 ADC muxes as virtual
ALSA: hda/realtek - Fix Oops in alc_mux_select()
ALSA: sis7019 - give slow codecs more time to reset
Linus Torvalds [Fri, 9 Dec 2011 16:07:24 +0000 (08:07 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Do no try to schedule task events if there are none
lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
perf header: Use event_name() to get an event name
perf stat: Failure with "Operation not supported"
Modify initialization of PCIe capability registers in Tsi721 mport driver:
- change Completion Timeout value to avoid unexpected data transfer
aborts during intensive traffic.
- replace hardcoded offset of PCIe capability block by making it use the
common function.
This patch is applicable to kernel versions starting from 3.2-rc1.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO
mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification. Mailbox
resources has to be properly reported to allow use of all available
mailboxes (initial version reports only MBOX0).
This patch is applicable to kernel versions staring from 3.2-rc1.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Thu, 8 Dec 2011 22:34:32 +0000 (14:34 -0800)]
procfs: do not overflow get_{idle,iowait}_time for nohz
Since commit a25cac5198d4 ("proc: Consider NO_HZ when printing idle and
iowait times") we are reporting idle/io_wait time also while a CPU is
tickless. We rely on get_{idle,iowait}_time functions to retrieve
proper data.
These functions, however, use usecs_to_cputime to translate micro
seconds time to cputime64_t. This is just an alias to usecs_to_jiffies
which reduces the data type from u64 to unsigned int and also checks
whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET)
and returns MAX_JIFFY_OFFSET in that case.
When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300
it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for
>3000s! until we overflow unsigned int. Just for reference
CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and
CONFIG_HZ_1000 ~2s.
This results in a bug when people saw [h]top going mad reporting 100%
CPU usage even though there was basically no CPU load. The reason was
simply that /proc/stat stopped reporting idle/io_wait changes (and
reported MAX_JIFFY_OFFSET) and so the only change happening was for user
system time.
Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision
to 32b type and it is much more appropriate for cumulative time values
(unlike usecs_to_jiffies which intended for timeout calculations).
Signed-off-by: Michal Hocko <mhocko@suse.cz> Tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dave Jones <davej@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 8 Dec 2011 22:34:30 +0000 (14:34 -0800)]
mm: vmalloc: check for page allocation failure before vmlist insertion
Commit f5252e00 ("mm: avoid null pointer access in vm_struct via
/proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after
it is fully initialised. Unfortunately, it did not check that
__vmalloc_area_node() successfully populated the area. In the event of
allocation failure, the vmalloc area is freed but the pointer to freed
memory is inserted into the vmlist leading to a a crash later in
get_vmalloc_info().
This patch adds a check for ____vmalloc_area_node() failure within
__vmalloc_node_range. It does not use "goto fail" as in the previous
error path as a warning was already displayed by __vmalloc_area_node()
before it called vfree in its failure path.
Credit goes to Luciano Chavez for doing all the real work of identifying
exactly where the problem was.
Michal Hocko [Thu, 8 Dec 2011 22:34:27 +0000 (14:34 -0800)]
mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks
setup_zone_migrate_reserve() expects that zone->start_pfn starts at
pageblock_nr_pages aligned pfn otherwise we could access beyond an
existing memblock resulting in the following panic if
CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid:
We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because
highstart_pfn = 0x36ffe.
The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page
in a pageblock is reserved before marking it MIGRATE_RESERVE").
Make sure that start_pfn is always aligned to pageblock_nr_pages to
ensure that pfn_valid s always called at the start of each pageblock.
Architectures with holes in pageblocks will be correctly handled by
pfn_valid_within in pageblock_is_reserved.
Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Dang Bo <bdang@vmware.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Arve Hjnnevg <arve@android.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [3.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Youquan Song [Thu, 8 Dec 2011 22:34:18 +0000 (14:34 -0800)]
thp: set compound tail page _count to zero
Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all
page_tail->_count zero at all times. But the current kernel does not
set page_tail->_count to zero if a 1GB page is utilized. So when an
IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a
tail page's _count does not equal zero.
Youquan Song [Thu, 8 Dec 2011 22:34:16 +0000 (14:34 -0800)]
thp: add compound tail page _mapcount when mapped
With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried
to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page
failed to be used.
The root cause is that 1GB page allocation calls gup_huge_pud() while 2M
page calls gup_huge_pmd. If compound pages are used and the page is a
tail page, gup_huge_pmd() increases _mapcount to record tail page are
mapped while gup_huge_pud does not do that.
So when the mapped page is relesed, it will result in kernel oops
because the page is not marked mapped.
This patch add tail process for compound page in 1GB huge page which
keeps the same process as 2M page.
Peter Zijlstra [Thu, 8 Dec 2011 22:34:13 +0000 (14:34 -0800)]
printk: avoid double lock acquire
Commit 4f2a8d3cf5e ("printk: Fix console_sem vs logbuf_lock unlock race")
introduced another silly bug where we would want to acquire an already
held lock. Avoid this.
Reported-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
More players joined to memory cgroup developments and Johannes' great work
changed internal design of memory cgroup dramatically. And he will do
more works. Michal Hokko did many bug fixes and know memory cgroup very
well. Daisuke Nishimura helped us very much but he seems busy now.
Thanks to his works.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
khugepaged can sometimes cause suspend to fail, requiring that the user
retry the suspend operation.
Use wait_event_freezable_timeout() instead of
schedule_timeout_interruptible() to avoid missing freezer wakeups. A
try_to_freeze() would have been needed in the khugepaged_alloc_hugepage
tight loop too in case of the allocation failing repeatedly, and
wait_event_freezable_timeout will provide it too.
khugepaged would still freeze just fine by trying again the next minute
but it's better if it freezes immediately.
Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Tested-by: Jiri Slaby <jslaby@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rjw@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A shrinker function can return -1, means that it cannot do anything
without a risk of deadlock. For example prune_super() does this if it
cannot grab a superblock refrence, even if nr_to_scan=0. Currently we
interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan'
according to this. So the next time around this shrinker can cause
really big pressure. Let's skip such shrinkers instead.
Also make total_scan signed, otherwise the check (total_scan < 0) below
never works.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matt Fleming [Fri, 18 Nov 2011 13:09:11 +0000 (13:09 +0000)]
x86, efi: Calling __pa() with an ioremap()ed address is invalid
If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set
in ->attribute we currently call set_memory_uc(), which in turn
calls __pa() on a potentially ioremap'd address.
On CONFIG_X86_32 this is invalid, resulting in the following
oops on some machines:
BUG: unable to handle kernel paging request at f7f22280
IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210
[...]
A better approach to this problem is to map the memory region
with the correct attributes from the start, instead of modifying
it after the fact. The uncached case can be handled by
ioremap_nocache() and the cached by ioremap_cache().
Despite first impressions, it's not possible to use
ioremap_cache() to map all cached memory regions on
CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really
don't like being mapped into the vmalloc space, as detailed in
the following bug report,
Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA
regions are covered by the direct kernel mapping table on
CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI
regions via the direct kernel mapping with the initial call to
init_memory_mapping() in setup_arch(), whereas previously these
regions wouldn't be mapped if they were after the last E820_RAM
region until efi_ioremap() was called. Doing it this way allows
us to delete efi_ioremap() completely.
Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jeff Layton [Fri, 2 Dec 2011 01:23:34 +0000 (20:23 -0500)]
cifs: check for NULL last_entry before calling cifs_save_resume_key
Prior to commit eaf35b1, cifs_save_resume_key had some NULL pointer
checks at the top. It turns out that at least one of those NULL
pointer checks is needed after all.
When the LastNameOffset in a FIND reply appears to be beyond the end of
the buffer, CIFSFindFirst and CIFSFindNext will set srch_inf.last_entry
to NULL. Since eaf35b1, the code will now oops in this situation.
Fix this by having the callers check for a NULL last entry pointer
before calling cifs_save_resume_key. No change is needed for the
call site in cifs_readdir as it's not reachable with a NULL
current_entry pointer.
Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Reported-by: Adam G. Metzler <adamgmetzler@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Fri, 2 Dec 2011 01:22:41 +0000 (20:22 -0500)]
cifs: attempt to freeze while looping on a receive attempt
In the recent overhaul of the demultiplex thread receive path, I
neglected to ensure that we attempt to freeze on each pass through the
receive loop.
Reported-and-Tested-by: Woody Suwalski <terraluna977@gmail.com> Reported-and-Tested-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
Staging: lttng: remove from the drivers/staging/ tree
The "proper" way to do this is to work with the existing in-kernel
tracing subsystem and work to get the missing features that are in lttng
into those subsystems.
staging: lttng: TODO update: lttng reported to work fine on -rt now
The patch "lttng: Fix recent modifications to string_from_user
operation" has been confirmed to fix the corrupted trace problem
experienced on -rt kernel by the original bug reporter. Remove the
entry from the LTTng TODO list.
staging: lttng: Fix recent modifications to string_from_user operation
Include: a fix for a recently introduced change: obviously max_t should
be used instead of min_t here. Also, a likely should apply to the result
of the comparison, not the variable per se.
Rob Clark [Tue, 6 Dec 2011 01:19:22 +0000 (19:19 -0600)]
drm/omap: add GEM support for tiled/dmm buffers
TILER/DMM provides two features for omapdrm GEM objects:
1) providing a physically contiguous view to discontiguous memory
for hw initiators that cannot otherwise support discontiguous
buffers (DSS scanout, IVAHD video decode/encode, etc)
2) providing untiling for 2d tiled buffers, which are used in some
cases to provide rotation and reduce memory bandwidth for hw
initiators that tend to access data in 2d block patterns.
For 2d tiled buffers, there are some additional complications when
it comes to userspace mmap'ings. For non-tiled buffers, the original
(potentially physically discontiguous) pages are used to back the
mmap. For tiled buffers, we need to mmap via the tiler/dmm region to
provide an unswizzled view of the buffer. But (a) the buffer is not
necessarily pinned in TILER all the time (it can be unmapped when
there is no DMA access to the buffer), and (b) when they are they
are pinned, they not necessarily page aligned from the perspective of
the CPU. And non-page aligned userspace buffer mapping is evil.
To solve this, we reserve one or more small regions in each of the 2d
containers when the driver is loaded to use as a "user-GART" where we
can create a second page-aligned mapping of parts of the buffer being
accessed from userspace. Page faulting is used to evict and remap
different regions of whichever buffers are being accessed from user-
space.
Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andy Gross [Tue, 6 Dec 2011 01:19:21 +0000 (19:19 -0600)]
drm/omap: DMM/TILER support for OMAP4+ platform
Dynamic Memory Manager (DMM) is a hardware block in the OMAP4+
processor that contains at least one TILER instance. TILER, or
Tiling and Isometric Lightweight Engine for Rotation, provides
IOMMU capabilities through the use of a physical address translation
table. The TILER also provides zero cost rotation and mirroring.
The TILER provides both 1D and 2D access by providing different views
or address ranges that can be used to access the physical memory that
has been mapped in through the PAT. Access to the 1D view results in
linear access to the underlying memory. Access to the 2D views result
in tiled access to the underlying memory resulted in increased
efficiency.
The TILER address space is managed by a tiler container manager (TCM)
and allocates the address space through the use of the Simple Tiler
Allocation algorithm (SiTA). The purpose of the algorithm is to keep
fragmentation of the address space as low as possible.
Signed-off-by: Andy Gross <andy.gross@ti.com> Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark Einon [Tue, 6 Dec 2011 23:23:10 +0000 (23:23 +0000)]
staging: et131x: Revert changes from previous commit
In commit 834d0ee317b (uintxy_t removal) not all changes were trival text replacements, some converted u64 -> dma_addr_t.
In some configurations dma_addr_t is a u32, meaning that some bit operations cause build warnings. From Randy Dunlap:
----------------
on i386 (X86_32) builds:
drivers/staging/et131x/et131x.c:2483:8: warning: right shift count >= width of type
drivers/staging/et131x/et131x.c:2531:8: warning: right shift count >= width of type
----------------
Removed these by reverting dma_addr_t back to u64 types, as well as
reverting some other non-trivial changes from the aforementioned commit.
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mark Einon <mark.einon@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: olpc_dcon.c: obsolete use of strict_stroul
As Dan mentioned, dcon_write() will only write u16 values. The
appropriate parts have been changed. As a result of module_param()
not accepting u16 as a valid data type, ushort is used.
Oren Weil [Tue, 6 Dec 2011 21:25:18 +0000 (23:25 +0200)]
staging: mei: updating mei driver documentation
The following changes were made in the document:
1. Update URLs to working links
2. remove old information about module parameters
3. Add IOCTL information.
4. cleanups and fix spelling
5. driver changed from character device to misc character device
Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging/mei: fix failure for multiple mei clients connection
The irq handler processes queued mei clients connect requests, which were
not transferred to the device in ioctl context due to unavailability
of the write buffer.
The handler may transfer the connection request only if there is
no other ongoing requests for the same mei id.
This condition was implemented inversely which depending on
the write buffer availability lead to seemingly random
failures during connection attempts.
Cc: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Natalia Ovsyanikov <natalia.ovsyanikov@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Xi Wang [Fri, 2 Dec 2011 21:28:43 +0000 (16:28 -0500)]
staging: olpc_dcon: ->read_status() API change
Change ->read_status() by separating the error handling and the
status bits. This also fixes a signedness bug in dcon_interrupt()
that would break the error handling.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jerome Marchand [Wed, 30 Nov 2011 13:16:16 +0000 (14:16 +0100)]
Staging: zram: Add a missing GFP_KERNEL specifier in zram_init_device()
The allocation of zram->compress_buffer is misssing a GFP_* specifier.
This is equivalent to GFP_NOWAIT but it is more likely a omission.
Since the allocation just above it uses GFP_KERNEL, there is no reason
to use GFP_NOWAIT here. Therefore, add GFP_KERNEL.
Staging: hv: storvsc: Fix a bug in create_bounce_buffer()
Set the length field of the scatter gather elements correctly when we create
the bounce buffer. When we use the bounce buffer for a "write" operation,
the act of copying to the bounce buffer, correctly deals with this issue.
However, on the "read" side, the current code was not correctly setting
the buffer length. Fix this bug. Note that when we copy from the bounce
buffer (for the read case), the amount we copy is controlled by the original
scatter gather list given to the driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reported-by: Dadok Milan <dadok@kvados.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Thu, 8 Dec 2011 21:18:59 +0000 (13:18 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: drop spin lock when memory alloc fails
Btrfs: check if the to-be-added device is writable
Btrfs: try cluster but don't advance in search list
Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE
Tetsuo Handa [Thu, 8 Dec 2011 12:24:06 +0000 (21:24 +0900)]
TOMOYO: Fix pathname handling of disconnected paths.
Current tomoyo_realpath_from_path() implementation returns strange pathname
when calculating pathname of a file which belongs to lazy unmounted tree.
Use local pathname rather than strange absolute pathname in that case.
Also, this patch fixes a regression by commit 02125a82 "fix apparmor
dereferencing potentially freed dentry, sanitize __d_path() API".
Mark Langsdorf [Fri, 18 Nov 2011 15:33:06 +0000 (16:33 +0100)]
x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
When HPET is operating in RTC mode, the TN_ENABLE bit on timer1
controls whether the HPET or the RTC delivers interrupts to irq8. When
the system goes into suspend, the RTC driver sends a signal to the
HPET driver so that the HPET releases control of irq8, allowing the
RTC to wake the system from suspend. The switchover is accomplished by
a write to the HPET configuration registers which currently only
occurs while servicing the HPET interrupt.
On some systems, I have seen the system suspend before an HPET
interrupt occurs, preventing the write to the HPET configuration
register and leaving the HPET in control of the irq8. As the HPET is
not active during suspend, it does not generate a wake signal and RTC
alarms do not work.
This patch forces the HPET driver to immediately transfer control of
the irq8 channel to the RTC instead of waiting until the next
interrupt event.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
Kevin McKinney [Tue, 6 Dec 2011 03:17:03 +0000 (22:17 -0500)]
Staging: bcm: Alter return value for copy_to/from_user() to "return -EFAULT" when an error occurs.
In this clean up patch, I altered functions: copy_to/
from_user() to return -EFAULT when an error occurs.
I also replaced break statements when an error occurs
from copy_to/from_user() with direct returns of -EFAULT.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin McKinney [Fri, 2 Dec 2011 03:02:16 +0000 (22:02 -0500)]
Staging: bcm: Alter code to move error handling closer to the calls; and remove white space, IOCTL_BCM_NVM_WRITE.
This is a clean up patch for IOCTL_BCM_NVM_WRITE
that replaces the assignment of the Status
variable with direct returns of the error code,
replaces the break statements with direct returns,
and removes a white space.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kevin McKinney [Fri, 2 Dec 2011 03:02:15 +0000 (22:02 -0500)]
Staging: bcm: Fix double free of 'pReadData' in IOCTL_BCM_NVM_WRITE.
This patch fixes a memory error in ioctl,
IOCTL_BCM_NVM_WRITE. While copying data to
user space, if an error occurs, pReadData
is freed. Then, at the end of the ioctl,
pReadData was being freed again.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Wed, 30 Nov 2011 08:42:21 +0000 (11:42 +0300)]
Staging: comedi: unlock on error in usbdux_ao_inttrig()
If we had an invalid trignum (anything other than zero is invalid) then
we returned without unlocking. I've modified this function to just have
one return point.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Mon, 5 Dec 2011 22:10:44 +0000 (00:10 +0200)]
staging: xgifb: disable LVDS on XG27
XG27 has the second display output already hardcoded to disabled. Just
in case, ensure that it has the LVDS code paths disabled. This will
simplify the future cleanups.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / mv-sheeva.git / log