Jean Delvare [Tue, 6 Nov 2012 22:15:50 +0000 (09:15 +1100)]
i2c-i801: Enable interrupts for all post-ICH5 chips
I did not receive a single bug report after interrupt support was
added for a limited number of chips. So I'd say the code is good and
should be enabled for all supported chips, that is: ICH5 and later.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Daniel Kurtz <djkurtz@chromium.org>
Ingo Tuchscherer [Wed, 31 Oct 2012 09:38:15 +0000 (10:38 +0100)]
s390/zcrypt: msgType50 (RSA-CRT) fix
The message request handling (type50 - clear key) for RSA operations
(in CRT format) are now handled correctly with respect to the crb
format container.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 30 Oct 2012 13:49:37 +0000 (14:49 +0100)]
s390/mm: keep fault_init() private to fault.c
Just convert fault_init() to an early initcall. That's still early
enough since it only needs be called before user space processes get
executed. No reason to externalize it.
Also add the function to the init section and move the store_indication
variable to the read_mostly section.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jan Glauber [Fri, 26 Oct 2012 13:06:12 +0000 (15:06 +0200)]
s390/crypto: Don't panic after crypto instruction failures
Remove the BUG_ON's that check for failure or incomplete
results of the s390 hardware crypto instructions.
Rather report the errors as -EIO to the crypto layer.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jan Glauber [Wed, 24 Oct 2012 10:38:35 +0000 (12:38 +0200)]
s390/qdio: rework BUG's and WARN_ON's
Remove or replace BUG/BUG_ON where possible and convert WARN_ON
to WARN_ON_ONCE if they can occur freqeuently as pointed out by:
https://lkml.org/lkml/2012/9/27/461
Checks have been removed if:
- the error condition leads to a hardware error which gets logged
and in most cases stops the device
- the error condition is a null pointer access
- the error condition is just pointless or already handled at
another location
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Tue, 23 Oct 2012 18:28:37 +0000 (20:28 +0200)]
s390/dasd: fix multi-line printks with multiple KERN_<level>s
Do not use more than one KERN_<level> per printk.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 18 Oct 2012 16:10:06 +0000 (18:10 +0200)]
s390/traps: preinitialize program check table
Preinitialize the program check table, so we can put it into the
read-only data section.
Also use only four byte entries for the table, since each program
check handler resides within the first 2GB. Therefore this reduces
the size of the table by 50% on 64 bit builds.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 17 Oct 2012 10:18:05 +0000 (12:18 +0200)]
s390/mm,vmemmap: use 1MB frames for vmemmap
Use 1MB frames for vmemmap if EDAT1 is available in order to
reduce TLB pressure
Always use a 1MB frame even if its only partially needed for
struct pages. Otherwise we would end up with a mix of large
frame and page mappings, because vmemmap_populate gets called
for each section (256MB -> 3.5MB memmap) separately.
Worst case is that we would waste 512KB.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Tue, 6 Nov 2012 14:10:05 +0000 (15:10 +0100)]
s390/cio: fix length calculation in idset.c
bitmap_or uses the number of bits as its length parameter and
not the number of words necessary to store those bits.
This fixes a regression introduced by: aa92b33 s390/cio: use generic bitmap functions
Reported-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 31 Oct 2012 16:14:39 +0000 (17:14 +0100)]
s390/sclp: fix addressing mode clobber
The early mini sclp driver may be called in zArch mode either in
31 or 64 bit addressing mode.
If called in 31 bit addressing mode the new external interrupt psw
however would switch to 64 bit addressing mode. This would cause an
addressing exception within the interrupt handler, since the code
didn't expect the zArch/31 bit addressing mode combination.
Fix this by setting the new psw addressing mode bits so they fit
the current addressing mode.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ralf Baechle [Tue, 6 Nov 2012 13:27:19 +0000 (14:27 +0100)]
MIPS: Fix harmlessly missing else statement.
The actual bug is a missing else statement - but really this should be
expressed using a switch() statement.
Found by Al Viro who writes "the funny thing is, it *does* work only
because r2 is syscall number and syscall number around 512 => return
value being ENOSYS and not one of ERESTART... so we really can't hit
the first if and emerge from it with ERESTART_RESTARTBLOCK. still
wrong to write it that way..."
GFS2: Don't call file_accessed() with a shared glock
file_accessed() was being called by gfs2_mmap() with a shared glock. If it
needed to update the atime, it was crashing because it dirtied the inode in
gfs2_dirty_inode() without holding an exclusive lock. gfs2_dirty_inode()
checked if the caller was already holding a glock, but it didn't make sure that
the glock was in the exclusive state. Now, instead of calling file_accessed()
while holding the shared lock in gfs2_mmap(), file_accessed() is called after
grabbing and releasing the glock to update the inode. If file_accessed() needs
to update the atime, it will grab an exclusive lock in gfs2_dirty_inode().
gfs2_dirty_inode() now also checks to make sure that if the calling process has
already locked the glock, it has an exclusive lock.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Taku Izumi [Wed, 31 Oct 2012 00:51:48 +0000 (09:51 +0900)]
PCI/portdrv: Don't create hotplug slots unless port supports hotplug
Commit 2dcfaf85 mistakenly dropped the "flags & PCI_EXP_FLAGS_SLOT" test,
so now we create hotplug slots even for PCIe port devices that don't
support hotplug. This patch fixes this problem.
[bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Bjorn Helgaas [Mon, 5 Nov 2012 23:59:53 +0000 (16:59 -0700)]
Merge branch 'pci/huang-d3cold-fixes' into for-linus
* pci/huang-d3cold-fixes:
PCI/PM: Fix proc config reg access for D3cold and bridge suspending
PCI/PM: Resume device before shutdown
PCI/PM: Fix deadlock when unbinding device if parent in D3cold
Guenter Roeck [Mon, 5 Nov 2012 22:54:48 +0000 (09:54 +1100)]
hwmon: (it87) Support PECI for additional chips
Extend support for reporting and selecting PECI temperature sensors
to IT8718, IT8720, IT8782, and IT8783. For IT8721, report the sensor
type for temp2 as Intel PECI (6) if the chip is configured to report
the PCH temperature.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Guenter Roeck [Mon, 5 Nov 2012 22:54:47 +0000 (09:54 +1100)]
hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate
IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor
can be programmed to display the temperature reported on the PECI interface.
If configured for Intel PECI, the driver reported the wrong sensor type for
the respective thermal sensor. Fix the code to correctly report it as
"Intel PECI (6)".
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Guenter Roeck [Mon, 5 Nov 2012 22:54:47 +0000 (09:54 +1100)]
hwmon: (it87) Manage device specific features with table
This simplifies the code, improves runtime performance, reduces
code size (about 280 bytes on x86_64), and makes it easier
to add support for new devices.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Guenter Roeck [Mon, 5 Nov 2012 22:54:45 +0000 (09:54 +1100)]
hwmon: (it87) Replace macro defining tempX_type sensors with direct definitions
The macro name show_sensor_offset is confusing since it related to the sensor
type, not an offset - even more so when we introduce offset attributes later on.
Replace it with direct definitions, and replace the show_sensor/set_sensor
function names with show_temp_type/set_temp_type. This also resolves a
checkpatch error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
A deeper analysis of the code shows that these are false positives, as
only the lower 3 bits of data->have_temp_offset can be set so the
write is never attempted with i >= 3. However this shows that the code
isn't very robust and future changes could easily introduce a buffer
overflow. So let's add a safety check to prevent that and make smatch
happy.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Huewe <PeterHuewe@gmx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Only the W83627HF could be accessed through I2C. All other supported
chips are LPC-only, so they do not have I2C address registers. Don't
write to nonexistent or reserved registers on these chips.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
Jean Delvare [Mon, 5 Nov 2012 22:54:43 +0000 (09:54 +1100)]
hwmon: (w83627hf) Add support for suspend
On suspend some register values are lost, most notably the Value RAM
areas but also other limits. Restore them on resume. On top of that,
some fixups are needed to work around BIOS bugs, in particular when
the BIOS omits running the same initialization sequence on resume
that it does after boot. In that case we have to carry initialization
over suspend.
Jean Delvare [Mon, 5 Nov 2012 22:54:43 +0000 (09:54 +1100)]
hwmon: Fix chip feature table headers
These got broken by recent patches fixing checkpatch warnings in these
drivers. The trick is that the patches themselves looked good, but the
source files after applying them do not. That's why I am not a big fan
of using tabs inside comments.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
Jean Delvare [Mon, 5 Nov 2012 22:54:43 +0000 (09:54 +1100)]
hwmon: (w83627ehf) Force initial bank selection
Don't assume bank 0 is selected at device probe time. This may not be
the case. Force bank selection at first register access to guarantee
that we read the right registers upon driver loading.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org
Bjorn Helgaas [Mon, 5 Nov 2012 17:53:47 +0000 (10:53 -0700)]
Merge branch 'pci/yinghai-for-pci-root-bus-hotplug' into next
* pci/yinghai-for-pci-root-bus-hotplug:
PCI/ACPI: Remove acpi_root_driver in reverse order
PCI/ACPI: Delete host bridge _PRT during hot remove path
PCI/ACPI: Make acpi_pci_root_remove() stop/remove pci root bus
PCI: Add pci_stop_and_remove_root_bus()
PCI/ACPI: Assign unassigned resource for hot-added root bus
PCI: Move out pci_enable_bridges out of assign_unsigned_bus_res
PCI: Move pci_rescan_bus() back to probe.c
PCI: Separate out pci_assign_unassigned_bus_resources()
Huang Ying [Thu, 25 Oct 2012 01:36:03 +0000 (09:36 +0800)]
PCI/PM: Fix proc config reg access for D3cold and bridge suspending
In https://bugzilla.kernel.org/show_bug.cgi?id=48981
Peter reported that /proc/bus/pci/??/??.? does not work for 3.6.
This is because the device configuration space registers are
not accessible if the corresponding parent bridge is suspended or
the device is put into D3cold state.
This is the same as /sys/bus/pci/devices/0000:??:??.?/config access
issue. So the function used to solve sysfs issue is used to solve
this issue.
This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c
to pci/pci.c and makes them extern so they can be used by both the
sysfs and proc paths.
[bhelgaas: changelog, references, reporters]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis <cybercyst@gmail.com> Reported-by: Peter <lekensteyn@gmail.com> Reported-by: Micael Dias <kam1kaz3@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
Max Filippov [Sat, 3 Nov 2012 20:30:13 +0000 (00:30 +0400)]
xtensa: add device trees support
Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single binary kernel on a range of compatible
boards.
New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat
device tree is passed in it.
Note that current interrupt mapping scheme uses single cell for
interrupt identification. That means that IRQ numbers used in DTS must
be CPU internal IRQ numbers, not external. It is possible to extend
interrupt identification to two cells, and use second cell to tell
external IRQ numbers form internal. That would allow to use single DTS
on multiple boards with different mapping of external IRQ numbers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
Max Filippov [Sat, 3 Nov 2012 20:29:12 +0000 (00:29 +0400)]
xtensa: add IRQ domains support
IRQ domains provide a mechanism for conversion of linux IRQ numbers to
hardware IRQ numbers and vice versus. It is used by OpenFirmware for
linking device tree objects to their respective interrupt controllers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
Jon Hunter [Thu, 25 Oct 2012 20:23:18 +0000 (21:23 +0100)]
ARM: PMU: fix runtime PM enable
Commit 7be2958 (ARM: PMU: Add runtime PM Support) updated the ARM PMU code to
use runtime PM which was prototyped and validated on the OMAP devices. In this
commit, there is no call pm_runtime_enable() and for OMAP devices
pm_runtime_enable() is currently being called from the OMAP PMU code when the
PMU device is created. However, there are two problems with this:
1. For any other ARM device wishing to use runtime PM for PMU they will need
to call pm_runtime_enable() for runtime PM to work.
2. When booting with device-tree and using device-tree to create the PMU
device, pm_runtime_enable() needs to be called from within the ARM PERF
driver as we are no longer calling any device specific code to create the
device. Hence, PMU does not work on OMAP devices that use the runtime PM
callbacks when using device-tree to create the PMU device.
Therefore, call pm_runtime_enable() directly from the ARM PMU driver when
registering the device. For platforms that do not use runtime PM,
pm_runtime_enable() does nothing and for platforms that do use runtime PM but
may not require it specifically for PMU, this will just add a little overhead
when initialising and uninitialising the PMU device.
Tested with PERF on OMAP2420, OMAP3430 and OMAP4460.
Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Mon, 5 Nov 2012 12:34:47 +0000 (12:34 +0000)]
arm64: perf: use architected event for CPU cycle counter
We currently use a fake event encoding (0xFF) to indicate CPU cycles so
that we don't waste an event counter and can target the hardware cycle
counter instead.
The problem with this approach is that the event space defined by the
architecture permits an implementation to allocate 0xFF for some other
event.
This patch uses the architected cycle counter encoding (0x11) so that
we avoid potentially clashing with event encodings on future CPU
implementations.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Catalin Marinas [Wed, 24 Oct 2012 15:34:02 +0000 (16:34 +0100)]
arm64: Make the user fault reporting more specific
For user space faults the kernel reports "unhandled page fault" and it
gives the ESR value. With this patch the error message looked up in the
fault info array to give a better description.
Stefan Achatz [Sun, 4 Nov 2012 08:39:09 +0000 (09:39 +0100)]
HID: roccat: Cleanup of koneplus module
Removed caching of profile data which lowers memory footprint,
speeds up init and fixes problems with device reset.
Removed unnecessary infos in header.
Code moved nearer to format of newer drivers.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stefan Achatz [Sun, 4 Nov 2012 08:39:04 +0000 (09:39 +0100)]
HID: roccat: enable Koneplus device reset
Device can be reset to factory state by sending a command via info sysfs attr.
Added binary attribute info for this purpose, which obsoletes firmware_version
attribute.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
projects / karo-tx-linux.git / log