David S. Miller [Tue, 21 Jul 2015 23:12:56 +0000 (16:12 -0700)]
Merge branch 'explicit-inbound-link-state'
Florian Fainelli says:
====================
net: enable inband link state negotiation only when explicitly requested
Changes in v5:
- removed an invalid use of the link_update callback in the SF2 driver
was appeared after merging "net: phy: fixed_phy: handle link-down case"
- reworded the commit message for patch 2 to make it clear what it fixes and
why this is required
Initial cover letter from Stas:
Hello.
Currently the link status auto-negotiation is enabled
for any SGMII link with fixed-link DT binding.
The regression was reported:
https://lkml.org/lkml/2015/7/8/865
Apparently not all HW that implements SGMII protocol, generates the
inband status for the auto-negotiation to work.
More details here:
https://lkml.org/lkml/2015/7/10/206
The following patches reverts to the old behavior by default,
which is to not enable the auto-negotiation for fixed-link.
The new DT property is added that allows to explicitly request
the auto-negotiation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mvneta: use inband status only when explicitly enabled
The commit 898b2970e2c9 ("mvneta: implement SGMII-based in-band link state
signaling") implemented the link parameters auto-negotiation unconditionally.
Unfortunately it appears that some HW that implements SGMII protocol,
doesn't generate the inband status, so it is not possible to auto-negotiate
anything with such HW.
This patch enables the auto-negotiation only if explicitly requested with
the 'managed' DT property.
This patch fixes the following regression:
https://lkml.org/lkml/2015/7/8/865
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
of_mdio: add new DT property 'managed' to specify the PHY management type
Currently the PHY management type is selected by the MAC driver arbitrary.
The decision is based on the presence of the "fixed-link" node and on a
will of the driver's authors.
This caused a regression recently, when mvneta driver suddenly started
to use the in-band status for auto-negotiation on fixed links.
It appears the auto-negotiation may not work when expected by the MAC driver.
Sebastien Rannou explains:
<< Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's
a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with
inband status) is connected to the switch through QSGMII, and in this context
we are on the media side of the PHY. >>
https://lkml.org/lkml/2015/7/10/206
This patch introduces the new string property 'managed' that allows
the user to set the management type explicitly.
The supported values are:
"auto" - default. Uses either MDIO or nothing, depending on the presence
of the fixed-link node
"in-band-status" - use in-band status
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
fixed_phy_register() currently hardcodes the fixed PHY link to 1, and
expects to find a "speed" parameter to provide correct information
towards the fixed PHY consumer.
In a subsequent change, where we allow "managed" (e.g: (RS)GMII in-band
status auto-negotiation) fixed PHYs, none of these parameters can be
provided since they will be auto-negotiated, hence, we just provide a
zero-initialized fixed_phy_status to fixed_phy_register() which makes it
fail when we call fixed_phy_update_regs() since status.speed = 0 which
makes us hit the "default" label and error out.
Without this change, we would also see potentially inconsistent
speed/duplex parameters for fixed PHYs when the link is DOWN.
CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
[florian: add more background to why this is correct and desirable] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The SF2 driver currently overrides speed settings for its port
configured using a fixed PHY, this is both unnecessary and incorrect,
because we keep feedback to the hardware parameters that we read from
the PHY device, which in the case of a fixed PHY cannot possibly change
speed.
This is a required change to allow the fixed PHY code to allow
registering a PHY with a link configured as DOWN by default and avoid
some sort of circular dependency where we require the link_update
callback to run to program the hardware, and we then utilize the fixed
PHY parameters to program the hardware with the same settings.
Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The sk_classid member is only required when CONFIG_CGROUP_NET_CLASSID is
enabled. #ifdefify it to reduce the size of struct sock on 32 bit
systems, at least.
Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 21 Jul 2015 17:39:07 +0000 (10:39 -0700)]
Merge branch 'lwtunnel'
Thomas Graf says:
====================
Lightweight & flow based encapsulation
This series combines the work previously posted by Roopa, Robert and
myself. It's according to what we discussed at NFWS. The motivation
of this series is to:
* Consolidate code between OVS and the rest of the kernel and get
rid of OVS vports and instead represent them as pure net_devices.
* Introduce a lightweight tunneling mechanism which enables flow
based encapsulation to improve scalability on both RX and TX.
* Do the above in an encapsulation unspecific way so that the
encapsulation type is eventually abstracted away from the user.
* Use the same forwarding decision for both native forwarding and
encapsulation thus allowing to switch between native IPv6 and
UDP encapsulation based on endpoint without requiring additional
logic
The fundamental changes introduces in this series are:
* A new RTA_ENCAP Netlink attribute for routes carrying encapsulation
instructions. Depending on the specified type, the instructions
apply to UDP encapsulations, MPLS and possible other in the future.
* Depending on the encapsulation type, the output function of the
dst is directly overwritten or the dst merely attaches metadata and
relies on a subsequent net_device to apply it to the packet. The
latter is typically used if an inner and outer IP header exist which
require two subsequent routing lookups to be performed.
* A new metadata_dst structure which can be attached to skbs to
carry metadata in between subsystems. This new metadata transport
is used to provide a single interface for VXLAN, routing and OVS
to communicate through metadata.
The OVS interfaces remain as-is but will transparently create a real
VXLAN net_device in the background. iproute2 is extended with a new
use cases:
VXLAN:
ip route add 40.1.1.1/32 encap vxlan id 10 dst 50.1.1.2 dev vxlan0
MPLS:
ip route add 10.1.1.0/30 encap mpls 200 via inet 10.1.1.1 dev swp1
Performance implications:
The additional memory allocation in the receive path should have
performance implications although it is not observable in standard
throughput tests if GRO is properly done. The correct net_device
model outweights the additional cost of the allocation. Furthermore,
this implication can be relaxed by reintroducing a direct unqueued
path from a software device to a consumer like bridge or OVS if
needed.
$ netperf -t TCP_STREAM -H 15.1.1.201
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
15.1.1.201 (15.1.1.201) port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 10.00 9118.17
Changes since v1:
* Properly initialize tun_id as reported by Julian
* Drop dupliate netif_keep_dst() as reported by Alexei
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:44:06 +0000 (10:44 +0200)]
openvswitch: Use regular VXLAN net_device device
This gets rid of all OVS specific VXLAN code in the receive and
transmit path by using a VXLAN net_device to represent the vport.
Only a small shim layer remains which takes care of handling the
VXLAN specific OVS Netlink configuration.
Unexports vxlan_sock_add(), vxlan_sock_release(), vxlan_xmit_skb()
since they are no longer needed.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:44:04 +0000 (10:44 +0200)]
openvswitch: Move dev pointer into vport itself
This is the first step in representing all OVS vports as regular
struct net_devices. Move the net_device pointer into the vport
structure itself to get rid of struct vport_netdev.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:44:03 +0000 (10:44 +0200)]
openvswitch: Make tunnel set action attach a metadata dst
Utilize the new metadata dst to attach encapsulation instructions to
the skb. The existing egress_tun_info via the OVS_CB() is left in
place until all tunnel vports have been converted to the new method.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:44:01 +0000 (10:44 +0200)]
fib: Add fib rule match on tunnel id
This add the ability to select a routing table based on the tunnel
id which allows to maintain separate routing tables for each virtual
tunnel network.
ip rule add from all tunnel-id 100 lookup 100
ip rule add from all tunnel-id 200 lookup 200
A new static key controls the collection of metadata at tunnel level
upon demand.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:44:00 +0000 (10:44 +0200)]
route: Per route IP tunnel metadata via lightweight tunnel
This introduces a new IP tunnel lightweight tunnel type which allows
to specify IP tunnel instructions per route. Only IPv4 is supported
at this point.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:43:59 +0000 (10:43 +0200)]
route: Extend flow representation with tunnel key
Add a new flowi_tunnel structure which is a subset of ip_tunnel_key to
allow routes to match on tunnel metadata. For now, the tunnel id is
added to flowi_tunnel which allows for routes to be bound to specific
virtual tunnels.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:43:58 +0000 (10:43 +0200)]
vxlan: Flow based tunneling
Allows putting a VXLAN device into a new flow-based mode in which
skbs with a ip_tunnel_info dst metadata attached will be encapsulated
according to the instructions stored in there with the VXLAN device
defaults taken into consideration.
Similar on the receive side, if the VXLAN_F_COLLECT_METADATA flag is
set, the packet processing will populate a ip_tunnel_info struct for
each packet received and attach it to the skb using the new metadata
dst. The metadata structure will contain the outer header and tunnel
header fields which have been stripped off. Layers further up in the
stack such as routing, tc or netfitler can later match on these fields
and perform forwarding. It is the responsibility of upper layers to
ensure that the flag is set if the metadata is needed. The flag limits
the additional cost of metadata collecting based on demand.
This prepares the VXLAN device to be steered by the routing and other
subsystems which allows to support encapsulation for a large number
of tunnel endpoints and tunnel ids through a single net_device which
improves the scalability.
It also allows for OVS to leverage this mode which in turn allows for
the removal of the OVS specific VXLAN code.
Because the skb is currently scrubed in vxlan_rcv(), the attachment of
the new dst metadata is postponed until after scrubing which requires
the temporary addition of a new member to vxlan_metadata. This member
is removed again in a later commit after the indirect VXLAN receive API
has been removed.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:43:56 +0000 (10:43 +0200)]
dst: Metadata destinations
Introduces a new dst_metadata which enables to carry per packet metadata
between forwarding and processing elements via the skb->dst pointer.
The structure is set up to be a union. Thus, each separate type of
metadata requires its own dst instance. If demand arises to carry
multiple types of metadata concurrently, metadata dst entries can be
made stackable.
The metadata dst entry is refcnt'ed as expected for now but a non
reference counted use is possible if the reference is forced before
queueing the skb.
In order to allow allocating dsts with variable length, the existing
dst_alloc() is split into a dst_alloc() and dst_init() function. The
existing dst_init() function to initialize the subsystem is being
renamed to dst_subsys_init() to make it clear what is what.
The check before ip_route_input() is changed to ignore metadata dsts
and drop the dst inside the routing function thus allowing to interpret
metadata in a later commit.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:43:55 +0000 (10:43 +0200)]
icmp: Don't leak original dst into ip_route_input()
ip_route_input() unconditionally overwrites the dst. Hide the original
dst attached to the skb by calling skb_dst_set(skb, NULL) prior to
ip_route_input().
Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Tue, 21 Jul 2015 08:43:54 +0000 (10:43 +0200)]
ip_tunnel: Make ovs_tunnel_info and ovs_key_ipv4_tunnel generic
Rename the tunnel metadata data structures currently internal to
OVS and make them generic for use by all IP tunnels.
Both structures are kernel internal and will stay that way. Their
members are exposed to user space through individual Netlink
attributes by OVS. It will therefore be possible to extend/modify
these structures without affecting user ABI.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
For input routes with tunnel encap state this patch redirects
dst output functions to lwtunnel_output which later resolves to
the corresponding lwtunnel output function.
This has been tested to work with mpls ip tunnels.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces lwtunnel_output function to call corresponding
lwtunnels output function to xmit the packet.
It adds two variants lwtunnel_output and lwtunnel_output6 for ipv4 and
ipv6 respectively today. But this is subject to change when lwtstate will
reside in dst or dst_metadata (as per upstream discussions).
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
lwtunnel: infrastructure for handling light weight tunnels like mpls
Provides infrastructure to parse/dump/store encap information for
light weight tunnels like mpls. Encap information for such tunnels
is associated with fib routes.
This infrastructure is based on previous suggestions from
Eric Biederman to follow the xfrm infrastructure.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
rtnetlink: introduce new RTA_ENCAP_TYPE and RTA_ENCAP attributes
This patch introduces two new RTA attributes to attach encap
data to fib routes.
Example iproute2 command to attach mpls encap data to ipv4 routes
$ip route add 10.1.1.0/30 encap mpls 200 via inet 10.1.1.1 dev swp1
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qmi_wwan: Add support for Dell Wireless 5809e 4G Modem
Added the USB IDs 0x413c:0x81b1 for the "Dell Wireless 5809e Gobi(TM) 4G
LTE Mobile Broadband Card", a Dell-branded Sierra Wireless EM7305 LTE
card in M.2 form factor, used eg. in Dell's Latitude E7540 Notebook
series.
Signed-off-by: Pieter Hollants <pieter@hollants.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 21 Jul 2015 07:23:24 +0000 (00:23 -0700)]
Merge branch 'cxgb4-dcb'
Anish Bhatt says:
====================
cxgb4 DCB updates
The following patchset covers changes to work better with the userspace
tools cgdcbxd and cgrulesengd and improves firmware support for
host-managed mode.
Also exports traffic class information that was previously not being
exported via dcbnl_ops and unfifies how app selector information is passed
to firmware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4 : Allow firmware DCB info to be queried in host state
Since finally DCB traffic management is still handled by firmware,
allow firmware to be fully programmed and queried even in host
managed state for the cases where this was previously rejected.
Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 21 Jul 2015 07:20:18 +0000 (00:20 -0700)]
Merge branch 'sctp-src-addr'
Marcelo Ricardo Leitner says:
====================
sctp: fix src address selection if using secondary address
This series improves the way SCTP chooses its src address so that the
choosen one will always belong to the interface being used for output.
v1->v2:
- split out the refactoring from the fix itself
- Doing a full reverse routing as in v1 is not necessary. Only looking
for the interface that has the address and comparing its number is
enough.
====================
Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sctp: fix src address selection if using secondary addresses
In short, sctp is likely to incorrectly choose src address if socket is
bound to secondary addresses. This patch fixes it by adding a new check
that checks if such src address belongs to the interface that routing
identified as output.
This is enough to avoid rp_filter drops on remote peer.
Details:
Currently, sctp will do a routing attempt without specifying the src
address and compare the returned value (preferred source) with the
addresses that the socket is bound to. When using secondary addresses,
this will not match.
Then it will try specifying each of the addresses that the socket is
bound to and re-routing, checking if that address is valid as src for
that dst. Thing is, this check alone is weak:
# ip r l
192.168.100.0/24 dev eth1 proto kernel scope link src 192.168.100.149
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.147
# ip a l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:15:18:6a brd ff:ff:ff:ff:ff:ff
inet 192.168.122.147/24 brd 192.168.122.255 scope global dynamic eth0
valid_lft 2160sec preferred_lft 2160sec
inet 192.168.122.148/24 scope global secondary eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe15:186a/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:b3:91:46 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.149/24 brd 192.168.100.255 scope global dynamic eth1
valid_lft 2162sec preferred_lft 2162sec
inet 192.168.100.148/24 scope global secondary eth1
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:feb3:9146/64 scope link
valid_lft forever preferred_lft forever
4: ens9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:05:47:ee brd ff:ff:ff:ff:ff:ff
inet6 fe80::5054:ff:fe05:47ee/64 scope link
valid_lft forever preferred_lft forever
# ip r g 192.168.100.193 from 192.168.122.148
192.168.100.193 from 192.168.122.148 dev eth1
cache
Even if you specify an interface:
# ip r g 192.168.100.193 from 192.168.122.148 oif eth1
192.168.100.193 from 192.168.122.148 dev eth1
cache
Although this would be valid, peers using rp_filter will drop such
packets as their src doesn't match the routes for that interface.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/vxlan: Fix kernel unaligned access in __vxlan_find_mac
__vxlan_find_mac invokes ether_addr_equal on the eth_addr field,
which triggers unaligned access messages, so rearrange vxlan_fdb
to avoid this in the most non-intrusive way.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Fri, 17 Jul 2015 08:52:48 +0000 (10:52 +0200)]
rhashtable: Allow other tasks to be scheduled in large lookup loops
Depending on system speed, the large lookup/insert/delete loops of the testsuite can
take a considerable amount of time to complete causing watchdog warnings to appear.
Allow other tasks to be scheduled throughout the loops.
Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Let TC+eBPF programs call skb_vlan_push/pop via helpers.
v1->v2:
- reworded commit log to better explain correctness of re-caching
and fixed comparison of mixed endiannes (suggested by Eric)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
improve accuracy of timing in test_bpf and add two stress tests:
- {skb->data[0], get_smp_processor_id} repeated 2k times
- {skb->data[0], vlan_push} x 68 followed by {skb->data[0], vlan_pop} x 68
1st test is useful to test performance of JIT implementation of BPF_LD_ABS
together with BPF_CALL instructions.
2nd test is stressing skb_vlan_push/pop logic together with skb->data access
via BPF_LD_ABS insn which checks that re-caching of skb->data is done correctly.
In order to call bpf_skb_vlan_push() from test_bpf.ko have to add
three export_symbol_gpl.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allow eBPF programs attached to TC qdiscs call skb_vlan_push/pop via
helper functions. These functions may change skb->data/hlen which are
cached by some JITs to improve performance of ld_abs/ld_ind instructions.
Therefore JITs need to recognize bpf_skb_vlan_push/pop() calls,
re-compute header len and re-cache skb->data/hlen back into cpu registers.
Note, skb->data/hlen are not directly accessible from the programs,
so any changes to skb->data done either by these helpers or by other
TC actions are safe.
eBPF JIT supported by three architectures:
- arm64 JIT is using bpf_load_pointer() without caching, so it's ok as-is.
- x64 JIT re-caches skb->data/hlen unconditionally after vlan_push/pop calls
(experiments showed that conditional re-caching is slower).
- s390 JIT falls back to interpreter for now when bpf_skb_vlan_push() is present
in the program (re-caching is tbd).
These helpers allow more scalable handling of vlan from the programs.
Instead of creating thousands of vlan netdevs on top of eth0 and attaching
TC+ingress+bpf to all of them, the program can be attached to eth0 directly
and manipulate vlans as necessary.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 21 Jul 2015 03:50:19 +0000 (20:50 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-07-17
This series contains updates to igb, ixgbe, ixgbevf, i40e, bnx2x,
freescale, siena and dp83640.
Jacob provides several patches to clarify the intended way to implement
both SIOCSHWTSTAMP and ethtool's get_ts_info(). It is okay to support
the specific filters in SIOCSHWTSTAMP by upscaling them to the generic
filters.
Alex Duyck provides a igb patch to pull the time stamp from the fragment
before it gets added to the skb, to avoid a possible issue in which the
fragment can possibly be less than IGB_RX_HDR_LEN due to the time stamp
being pulled after the copybreak check. Also provides a ixgbevf patch to
fold the ixgbevf_pull_tail() call into ixgbevf_add_rx_frag(), which gives
the advantage that the fragment does not have to be modified after it is
added to the skb.
Fan provides patches for ixgbe/ixgbevf to set the receive hash type
based on receive descriptor RSS type.
Todd provides a fix for igb where on check for link on any media other
than copper was not being detected since it was looking on the incorrect
PHY page (due to the page being used gets switched before the function
to check link gets executed).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch series reworks how we perform PHY initialization and resets in the
GENET driver. Although this contains mostly fixes, some of the changes are a
bit too intrusive to be backported to 'net' at the moment.
Some of the motivations behind these changes were to reduce the time spent in how
performing MDIO transactions, since it is better to perform then when we have
interrupts enabled. This reduces the bring-up time of GENET from ~600 msecs down
to ~8 msecs, and about the same time for suspend/resume.
Since I do not currently have a system which is not DT-aware, can you (Petri,
Jaedon) give this a try and confirm things keep working as expected?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: Remove init parameter from bcmgenet_mii_config
Now that we have reworked the way we perform the PHY initialization, we
no longer need to differentiate between init time vs. non-init time
calls, just use a dev_info_once() print to print the PHY type.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: Delay PHY initialization to bcmgenet_open()
We are currently doing a full PHY initialization and even starting the
pHY state machine during bcmgenet_mii_init() which is executed in the
driver's probe function. This is convenient to determine whether we can
attach to a proper PHY device but comes at the expense of spending up to
10ms per MDIO transactions (to reach the waitqueue timeout), which slows
things down.
This also creates a sitaution where we end-up attaching twice to the
PHY, which is not quite correct either.
Fix this by moving bcmgenet_mii_probe() into bcmgenet_open() and update
its error path accordingly.
Avoid printing the message "attached PHY at address 1 [...]" every time
we bring up/down the interface and remove this print since it duplicates
what the PHY driver already does for us.
Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: Determine PHY type before scanning MDIO bus
Our internal GPHY might be powered off before we attempt scanning the
MDIO bus and bind a driver to it. The way we are currently determining
whether a PHY is internal or not is done *after* we have successfully
matched its driver. If the PHY is powered down, it will not respond to
the MDIO bus, so we will not be able to bind a driver to it.
Our Device Tree for GENET interfaces specifies a "phy-mode" value:
"internal" which tells if this internal uses an internal PHY or not.
If of_get_phy_mode() fails to parse the 'phy-mode' property, do an
additional manual lookup, and if we find "internal" set the
corresponding internal variable accordingly.
Replace all uses of phy_is_internal() with a check against
priv->internal_phy to avoid having to rely on whether or not
priv->phydev is set correctly.
Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: Power on integrated GPHY in bcmgenet_power_up()
We are currently disabling the GPHY interface during bcmgenet_close(),
and attempting to power it back on during bcmgenet_open(). This works
fine for the first time, because we called bcmgenet_mii_config() which
took care of enabling the interface, however, bcmgenet_power_up() really
needs to power on the GPHY for correctness.
This will be particularly important as we want to move
bcmgenet_mii_probe() down to bcmgenet_open() to avoid seeing the "PHY
already attached" message.
Fixes: a642c4f7906f36 ("net: bcmgenet: power up and down integrated GPHY when unused") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bcmgenet_open()'s error path call free_irq() with a dev_id argument
different from the one we used to call request_irq() with, this will
make us trip over the warning in kernel/irq/manage.c:__free_irq()
Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We are currently issuing multiple PHY resets during a suspend/resume,
first during bcmgenet_power_up() which does a hardware reset, then a
software reset by calling bcmgenet_mii_reset(). This is both unnecessary
and can take as long as 10ms per MDIO transactions while we re-apply
workarounds because we do not yet have MDIO interrupts enabled.
phy_resume() takes care of re-apply our workarounds in case we need any,
and bcmgenet_power_up() does a PHY hardware reset, all of this is more
than enough to guarantee that the PHY operates correctly.
Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 21 Jul 2015 03:45:58 +0000 (20:45 -0700)]
Merge branch 'stmmac-cleanup'
Joachim Eastwood says:
====================
stmmac clean up for 4.3 part1
This patch set continues the conversion of the dwmac glue layers
to more proper platform drivers. The first part of the patch set
cleans up stmmac_platform a bit. Refactors code from the common
probe function and exports two functions that will be used in
the dwmac-* drivers.
Second part converts two simple dwmac-* drivers to have their
own probe function and use the exported functions. This brings
us closer to point where stmmac_platform is only a library of
common functions for the dwmac-* drivers to use.
The plan next is:
* add probe functions to the rest of the dwmac-* drivers
* move probe function in stmmac_platform to dwmac-generic
* remove struct stmmac_of_data and let those drivers
that actually need match data handle it themselves
* clean up include/linux/stmmac.h
Note that this patch set has only been tested on lpc18xx so
testing on other platforms is greatly appreciated.
Previous parts can be found here:
http://www.spinics.net/lists/netdev/msg328997.html
http://www.spinics.net/lists/netdev/msg329932.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 16 Jul 2015 22:26:11 +0000 (00:26 +0200)]
stmmac: add proper probe function to dwmac-meson
By using a few functions from stmmac_platform we can now create
a proper probe function in this driver. By doing so we can drop
the OF match data and simplify the overall driver.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 16 Jul 2015 22:26:10 +0000 (00:26 +0200)]
stmmac: add proper probe function to dwmac-lpc18xx
By using a few functions from stmmac_platform we can now create
a proper probe function in this driver. By doing so we can drop
the OF match data and simplify the overall driver.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 16 Jul 2015 22:26:09 +0000 (00:26 +0200)]
stmmac: export probe_config_dt() and get_platform_resources()
Export stmmac_probe_config_dt() and stmmac_get_platform_resources()
so they can be used in the dwmac-* drivers themselves. This will
allow us to build more flexible and standalone drivers which just
use stmmac_platform as a library for setup functions.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 16 Jul 2015 22:26:08 +0000 (00:26 +0200)]
stmmac: make stmmac_probe_config_dt return the platform data struct
Since stmmac_probe_config_dt() allocates the platform data structure
it is cleaner if it just returned this structure directly. This
function will later be used in the probe function in dwmac-* drivers.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 16 Jul 2015 22:26:07 +0000 (00:26 +0200)]
stmmac: introduce stmmac_get_platform_resources()
Refactor all code that deals with platform resources into it's
own get function. This function will later be used in the probe
function in dwmac-* drivers.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joachim Eastwood [Thu, 16 Jul 2015 22:26:06 +0000 (00:26 +0200)]
stmmac: clean up platform/of_match data retrieval
Refactor code to clearly separate probing non-dt versus dt. In the
non-dt case platform data must be supplied to probe successfully.
For dt the platform data structure is created and match data is
copied into it. Note that support for supplying platform data in
dt from AUXDATA is dropped as no users in mainline does this.
This change will allow dt dwmac-* drivers to call the config_dt()
function from probe to create the needed platform data struct and
retrieve common dt properties.
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:31 +0000 (16:54 -0400)]
tipc: reduce locking scope during packet reception
We convert packet/message reception according to the same principle
we have been using for message sending and timeout handling:
We move the function tipc_rcv() to node.c, hence handling the initial
packet reception at the link aggregation level. The function grabs
the node lock, selects the receiving link, and accesses it via a new
call tipc_link_rcv(). This function appends buffers to the input
queue for delivery upwards, but it may also append outgoing packets
to the xmit queue, just as we do during regular message sending. The
latter will happen when buffers are forwarded from the link backlog,
or when retransmission is requested.
Upon return of this function, and after having released the node lock,
tipc_rcv() delivers/tranmsits the contents of those queues, but it may
also perform actions such as link activation or reset, as indicated by
the return flags from the link.
This reduces the number of cpu cycles spent inside the node spinlock,
and reduces contention on that lock.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:30 +0000 (16:54 -0400)]
tipc: introduce node contact FSM
The logics for determining when a node is permitted to establish
and maintain contact with its peer node becomes non-trivial in the
presence of multiple parallel links that may come and go independently.
A known failure scenario is that one endpoint registers both its links
to the peer lost, cleans up it binding table, and prepares for a table
update once contact is re-establihed, while the other endpoint may
see its links reset and re-established one by one, hence seeing
no need to re-synchronize the binding table. To avoid this, a node
must not allow re-establishing contact until it has confirmation that
even the peer has lost both links.
Currently, the mechanism for handling this consists of setting and
resetting two state flags from different locations in the code. This
solution is hard to understand and maintain. A closer analysis even
reveals that it is not completely safe.
In this commit we do instead introduce an FSM that keeps track of
the conditions for when the node can establish and maintain links.
It has six states and four events, and is strictly based on explicit
knowledge about the own node's and the peer node's contact states.
Only events leading to state change are shown as edges in the figure
below.
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:29 +0000 (16:54 -0400)]
tipc: move link supervision timer to node level
In our effort to move control of the links to the link aggregation
layer, we move the perodic link supervision timer to struct tipc_node.
The new timer is shared between all links belonging to the node, thus
saving resources, while still kicking the FSM on both its pertaining
links at each expiration.
The current link timer and corresponding functions are removed.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:28 +0000 (16:54 -0400)]
tipc: simplify link timer implementation
We create a second, simpler, link timer function, tipc_link_timeout().
The new function makes use of the new FSM function introduced in the
previous commit, and just like it, takes a buffer queue as parameter.
It returns an event bit field and potentially a link protocol packet
to the caller.
The existing timer function, link_timeout(), is still needed for a
while, so we redesign it to become a wrapper around the new function.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:27 +0000 (16:54 -0400)]
tipc: improve link FSM implementation
The link FSM implementation is currently unnecessarily complex.
It sometimes checks for conditional state outside the FSM data
before deciding next state, and often performs actions directly
inside the FSM logics.
In this commit, we create a second, simpler FSM implementation,
that as far as possible acts only on states and events that it is
strictly defined for, and postpone any actions until it is finished
with its decisions. It also returns an event flag field and an a
buffer queue which may potentially contain a protocol message to
be sent by the caller.
Unfortunately, we cannot yet make the FSM "clean", in the sense
that its decisions are only based on FSM state and event, and that
state changes happen only here. That will have to wait until the
activate/reset logics has been cleaned up in a future commit.
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:26 +0000 (16:54 -0400)]
tipc: introduce new link protocol msg create function
As a preparation for later changes, we introduce a new function
tipc_link_build_proto_msg(). Instead of actually sending the created
protocol message, it only creates it and adds it to the head of a
skb queue provided by the caller.
Since we still need the existing function tipc_link_protocol_xmit()
for a while, we redesign it to make use of the new function.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:25 +0000 (16:54 -0400)]
tipc: clean up definitions and usage of link flags
The status flag LINK_STOPPED is not needed any more, since the
mechanism for delayed deletion of links has been removed.
Likewise, LINK_STARTED and LINK_START_EVT are unnecessary,
because we can just as well start the link timer directly from
inside tipc_link_create().
We eliminate these flags in this commit.
Instead of the above flags, we now introduce three new link modes,
TIPC_LINK_OPEN, TIPC_LINK_BLOCKED and TIPC_LINK_TUNNEL. The values
indicate whether, and in the case of TIPC_LINK_TUNNEL, which, messages
the link is allowed to receive in this state. TIPC_LINK_BLOCKED also
blocks timer-driven protocol messages to be sent out, and any change
to the link FSM. Since the modes are mutually exclusive, we convert
them to state values, and rename the 'flags' field in struct tipc_link
to 'exec_mode'.
Finally, we move the #defines for link FSM states and events from link.h
into enums inside the file link.c, which is the real usage scope of
these definitions.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:24 +0000 (16:54 -0400)]
tipc: make media xmit call outside node spinlock context
Currently, message sending is performed through a deep call chain,
where the node spinlock is grabbed and held during a significant
part of the transmission time. This is clearly detrimental to
overall throughput performance; it would be better if we could send
the message after the spinlock has been released.
In this commit, we do instead let the call revert on the stack after
the buffer chain has been added to the transmission queue, whereafter
clones of the buffers are transmitted to the device layer outside the
spinlock scope.
As a further step in our effort to separate the roles of the node
and link entities we also move the function tipc_link_xmit() to
node.c, and rename it to tipc_node_xmit().
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:23 +0000 (16:54 -0400)]
tipc: change sk_buffer handling in tipc_link_xmit()
When the function tipc_link_xmit() is given a buffer list for
transmission, it currently consumes the list both when transmission
is successful and when it fails, except for the special case when
it encounters link congestion.
This behavior is inconsistent, and needs to be corrected if we want
to avoid problems in later commits in this series.
In this commit, we change this to let the function consume the list
only when transmission is successful, and leave the list with the
sender in all other cases. We also modifiy the socket code so that
it adapts to this change, i.e., purges the list when a non-congestion
error code is returned.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:22 +0000 (16:54 -0400)]
tipc: use bearer index when looking up active links
struct tipc_node currently holds two arrays of link pointers; one,
indexed by bearer identity, which contains all links irrespective of
current state, and one two-slot array for the currently active link
or links. The latter array contains direct pointers into the elements
of the former. This has the effect that we cannot know the bearer id of
a link when accessing it via the "active_links[]" array without actually
dereferencing the pointer, something we want to avoid in some cases.
In this commit, we do instead store the bearer identity in the
"active_links" array, and use this as an index to find the right element
in the overall link entry array. This change should be seen as a
preparation for the later commits in this series.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:21 +0000 (16:54 -0400)]
tipc: move link input queue to tipc_node
At present, the link input queue and the name distributor receive
queues are fields aggregated in struct tipc_link. This is a hazard,
because a link might be deleted while a receiving socket still keeps
reference to one of the queues.
This commit fixes this bug. However, rather than adding yet another
reference counter to the critical data path, we move the two queues
to safe ground inside struct tipc_node, which is already protected, and
let the link code only handle references to the queues. This is also
in line with planned later changes in this area.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:20 +0000 (16:54 -0400)]
tipc: move link creation from neighbor discoverer to node
As a step towards turning links into node internal entities, we move the
creation of links from the neighbor discovery logics to the node's link
control logics.
We also create an additional entry for the link's media address in the
newly introduced struct tipc_link_entry, since this is where it is
needed in the upcoming commits. The current copy in struct tipc_link
is kept for now, but will be removed later.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 16 Jul 2015 20:54:19 +0000 (16:54 -0400)]
tipc: introduce link entry structure to struct tipc_node
struct 'tipc_node' currently contains two arrays for link attributes,
one for the link pointers, and one for the usable link MTUs.
We now group those into a new struct 'tipc_link_entry', and intoduce
one single array consisting of such enties. Apart from being a cosmetic
improvement, this is a starting point for the strict master-slave
relation between node and link that we will introduce in the following
commits.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
- Per Nicolas Dichtel review: remove errant empty union.
v2:
- Per davem review: in sk_buff, union fwd_mark with secmark to save space
since features appear to be mutually exclusive.
- Per Simon Horman review:
- fix grammar in switchdev.txt wrt fwd_mark
- remove some unrelated changes that snuck in
v1:
This patchset was previously submitted as RFC. No changes from the last
version (v2) sent under RFC. Including RFC version history here for reference.
RFC v2:
- s/fwd_mark/offload_fwd_mark
- use consume_skb rather than kfree_skb when dropping pkt on egress.
- Use Jiri's suggestion to use ifindex of one of the ports in a group
as the mark for all the ports in the group. This can be done with
no additional storage (no hashtable from v1). To pull it off, we
need some simple recursive routines to walk the netdev tree ensuring
all leaves in the tree (ports) in the same group (e.g. bridge)
belonging to the same switch device will have the same offload fwd mark.
Maybe someone sees a better design for the recusive routines? They're
not too bad, and should cover the stacked driver cases.
RFC v1:
With switchdev support for offloading L2/L3 forwarding data path to a
switch device, we have a general problem where both the device and the
kernel may forward the packet, resulting in duplicate packets on the wire.
Anytime a packet is forwarded by the device and a copy is sent to the CPU,
there is potential for duplicate forwarding, as the kernel may also do a
forwarding lookup and send the packet on the wire.
The specific problem this patch series is interested in solving is avoiding
duplicate packets on bridged ports. There was a previous RFC from Roopa
(http://marc.info/?l=linux-netdev&m=142687073314252&w=2) to address this
problem, but didn't solve the problem of mixed ports in the bridge from
different devices; there was no way to exclude some ports from forwarding
and include others. This RFC solves that problem by tagging the ingressing
packet with a unique mark, and then comparing the packet mark with the
egress port mark, and skip forwarding when there is a match. For the mixed
ports bridge case, only those ports with matching marks are skipped.
The switchdev port driver must do two things:
1) Generate a fwd_mark for each switch port, using some unique key of the
switch device (and optionally port). This is done when the port netdev
is registered or if the port's group membership changes (joins/leaves
a bridge, for example).
2) On packet ingress from port, mark the skb with the ingress port's
fwd_mark. If the device supports it, it's useful to only mark skbs
which were already forwarded by the device. If the device does not
support such indication, all skbs can be marked, even if they're
local dst.
Two new 32-bit fields are added to struct sk_buff and struct netdevice to
hold the fwd_mark. I've wrapped these with CONFIG_NET_SWITCHDEV for now. I
tried using skb->mark for this purpose, but ebtables can overwrite the
skb->mark before the bridge gets it, so that will not work.
In general, this fwd_mark can be used for any case where a packet is
forwarded by the device and a copy is sent to the CPU, to avoid the kernel
re-forwarding the packet. sFlow is another use-case that comes to mind,
but I haven't explored the details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Sun, 19 Jul 2015 01:24:51 +0000 (18:24 -0700)]
rocker: add offload_fwd_mark support
If device flags ingress packet as "fwd offload", mark the
skb->offlaod_fwd_mark using the ingress port's dev->offlaod_fwd_mark. This
will be the hint to the kernel that this packet has already been forwarded
by device to egress ports matching skb->offlaod_fwd_mark.
For rocker, derive port dev->offlaod_fwd_mark based on device switch ID and
port ifindex. If port is bridged, use the bridge ifindex rather than the
port ifindex.
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Sun, 19 Jul 2015 01:24:50 +0000 (18:24 -0700)]
switchdev: add offload_fwd_mark generator helper
skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be
unique for device and may even be unique for a sub-set of ports within
device, so add switchdev helper function to generate unique marks based on
port's switch ID and group_ifindex. group_ifindex would typically be the
container dev's ifindex, such as the bridge's ifindex.
The generator uses a global hash table to store offload_fwd_marks hashed by
{switch ID, group_ifindex} key.
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Sun, 19 Jul 2015 01:24:48 +0000 (18:24 -0700)]
net: don't reforward packets already forwarded by offload device
Just before queuing skb for xmit on port, check if skb has been marked by
switchdev port driver as already fordwarded by device. If so, drop skb. A
non-zero skb->offload_fwd_mark field is set by the switchdev port
driver/device on ingress to indicate the skb has already been forwarded by
the device to egress ports with matching dev->skb_mark. The switchdev port
driver would assign a non-zero dev->offload_skb_mark for each device port
netdev during registration, for example.
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Thu, 16 Jul 2015 01:39:14 +0000 (10:39 +0900)]
rocker: forward packets to CPU when port is joined to openvswitch
Teach rocker to forward packets to CPU when a port is joined to Open vSwitch.
There is scope to later refine what is passed up as per Open vSwitch flows
on a port.
This does not change the behaviour of rocker ports that are
not joined to Open vSwitch.
Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: mcast: fix br_multicast_dev_del warn when igmp snooping is not defined
Fix:
net/bridge/br_if.c: In function 'br_dev_delete':
>> net/bridge/br_if.c:284:2: error: implicit declaration of function
>> 'br_multicast_dev_del' [-Werror=implicit-function-declaration]
br_multicast_dev_del(br);
^
cc1: some warnings being treated as errors
when igmp snooping is not defined.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter [Wed, 15 Jul 2015 19:56:26 +0000 (21:56 +0200)]
net/ipv6: update flowi6_oif in ip6_dst_lookup_flow if not set
Newly created flows don't have flowi6_oif set (at least if the
associated socket is not interface-bound). This leads to a mismatch in
__xfrm6_selector_match() for policies which specify an interface in the
selector (sel->ifindex != 0).
Backtracing shows this happens in code-paths originating from e.g.
ip6_datagram_connect(), rawv6_sendmsg() or tcp_v6_connect(). (UDP was
not tested for.)
In summary, this patch fixes policy matching on outgoing interface for
locally generated packets.
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
Get rid of these:
drivers/net/bonding//bond_main.c: In function ‘bond_update_slave_arr’:
drivers/net/bonding//bond_main.c:3754:6: warning: variable
‘slaves_in_agg’ set but not used [-Wunused-but-set-variable]
int slaves_in_agg;
^
CC [M] drivers/net/bonding//bond_3ad.o
drivers/net/bonding//bond_3ad.c: In function
‘ad_marker_response_received’:
drivers/net/bonding//bond_3ad.c:1870:61: warning: parameter ‘marker’
set but not used [-Wunused-but-set-parameter]
static void ad_marker_response_received(struct bond_marker *marker,
^
drivers/net/bonding//bond_3ad.c:1871:19: warning: parameter ‘port’ set
but not used [-Wunused-but-set-parameter]
struct port *port)
^
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 20 Jul 2015 19:49:11 +0000 (12:49 -0700)]
Merge branch 'bridge-temp-and-perm'
Nikolay Aleksandrov says:
====================
bridge: multicast: temp and perm entries behaviour enhancements
Patch 01 adds a notify when a group is deleted via br_multicast_del_pg()
(on expire, on device delete or on device down).
Patch 02 changes how bridge device and bridge port delete and down/up are
handled. Until now on bridge down all groups were flushed, now only the
temp ones are (same for port), perm entries are flushed only on port or
bridge removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
bridge: multicast: fix handling of temp and perm entries
When the bridge (or port) is brought down/up flush only temp entries and
leave the perm ones. Flush perm entries only when deleting the bridge
device or the associated port.
Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Group notifications were not sent when a group expired or was deleted
due to bridge/port device being deleted. So add br_mdb_notify() to
br_multicast_del_pg().
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 15 Jul 2015 12:21:42 +0000 (14:21 +0200)]
ebpf: add helper to retrieve net_cls's classid cookie
It would be very useful to retrieve the net_cls's classid from an eBPF
program to allow for a more fine-grained classification, it could be
directly used or in conjunction with additional policies. I.e. docker,
but also tooling such as cgexec, can easily run applications via net_cls
cgroups:
Thus, their respecitve classid cookie of foo can then be looked up on
the egress path to apply further policies. The helper is desigend such
that a non-zero value returns the cgroup id.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 15 Jul 2015 12:21:41 +0000 (14:21 +0200)]
cls_cgroup: factor out classid retrieval
Split out retrieving the cgroups net_cls classid retrieval into its
own function, so that it can be reused later on from other parts of
the traffic control subsystem. If there's no skb->sk, then the small
helper returns 0 as well, which in cls_cgroup terms means 'could not
classify'.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
enic: allow adaptive coalesce setting for msi/legacy intr
* Allow setting of adaptive coalescing setting for all types of interrupt.
* In msi & legacy intr, we use single interrupt for rx & tx. In this case
tx_coalesce_usecs is invalid. We should use only rx_coalesce_usecs.
Do not display tx_coal values for msi/intx. And do not allow user to set
this as well.
* Driver supports only tx/rx_coalesce_usec and adaptive coalesce settings.
For other values, driver does not return error. So ethtool succeeds for
unsupported values. Introduce enic_coalesce_valid() function to validate
the coalescing values.
* If user requests for coalesce value greater than what adaptor supports,
driver uses the max value. We should at least log this.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
enic: add adaptive coalescing intr for intx and msi poll
Adaptive interrupt coalescing is available for msix. This patch adds the support
for msi poll. Interface for adaptive interrupt coalescing is already added in
driver. We just did not enable it for legacy intr & msi.
enic_calc_int_moderation() & enic_set_int_moderation() are defined as static
after enic_poll. Since enic_poll needs it, move both of these function
definitions above enic_poll. No change in functionality.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
igb: Fix i354 88E1112 PHY on RCC boards using AutoMediaDetect
e1000_check_for_link_media_swap() checks PHY page 0 for copper and PHY
page 1 for "other" (fiber) link. The switch back from page 1 to page 0
happened too soon, before e1000_check_for_link_82575() is executed, and
link on fiber (other) was never detected. Check for link while still on
the proper PHY page.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fan Du [Wed, 29 Apr 2015 02:57:41 +0000 (10:57 +0800)]
ixgbe: Don't report flow director filter's status
For two reasons I want to disable this:
1. Not any part actually check the report status(Alexander Duyck)
2. To report hash value of a packet to stack,
RSS -> 32bits hash value
Perfect match fdir filter -> 13bits hash value
Hashed-based fdir filter -> 31bits hash value
fdir filter might hash on masked tuples for IP address,
so it's still not desirable for usage.
So for now, just stick to RSS 32bits hash value.
Signed-off-by: Fan Du <fan.du@intel.com> Suggested-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fan Du [Wed, 29 Apr 2015 02:57:40 +0000 (10:57 +0800)]
ixgbevf: Set Rx hash type for ingress packets
Set hash type for ingress packets according to NIC
advanced receive descriptors RSS type part.
Signed-off-by: Fan Du <fan.du@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fan Du [Wed, 29 Apr 2015 02:57:39 +0000 (10:57 +0800)]
ixgbe: Specify Rx hash type WRT Rx desc RSS type
RSS could be leveraged by taking account L4 src/dst ports
as ingredients, thus ingress skb Rx hash type should honor
such the real configuration.
Signed-off-by: Fan Du <fan.du@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
projects / linux-beck.git / log