Alan Tull [Wed, 7 Oct 2015 15:36:28 +0000 (16:36 +0100)]
add FPGA manager core
API to support programming FPGA's.
The following functions are exported as GPL:
* fpga_mgr_buf_load
Load fpga from image in buffer
* fpga_mgr_firmware_load
Request firmware and load it to the FPGA.
* fpga_mgr_register
* fpga_mgr_unregister
FPGA device drivers can be added by calling
fpga_mgr_register() to register a set of
fpga_manager_ops to do device specific stuff.
* of_fpga_mgr_get
* fpga_mgr_put
Get/put a reference to a fpga manager.
The following sysfs files are created:
* /sys/class/fpga_manager/<fpga>/name
Name of low level driver.
* /sys/class/fpga_manager/<fpga>/state
State of fpga manager
Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Poirier [Wed, 7 Oct 2015 15:26:41 +0000 (09:26 -0600)]
coresight: etm3x: adding cpu affinity to sysFS interface
Without access to the device tree, it is impossible to know
what CPU a tracer is affined to. As such adding a new sysFS
interface to convey the information.
Chunyan Zhang [Wed, 7 Oct 2015 15:26:38 +0000 (09:26 -0600)]
Coresight: ETMv4: Prevent TRCRSCTLR0&1 from being accessed
1. TRCRSCTLRn - Resource Selection Control Registers n=0~1 are reserved,
we shouldn't access them.
2. The max number of 'n' here is defined in TRCIDR4.NUMRSPAIR whoes value
indicates the number of resource selection *pairs*, and 0 indicates
one resource selection pair, 1 indicates two pairs, and so on ...
So, the total number of resource selection control registers which we can
access is (TRCIDR4.NUMRSPAIR * 2)
Sudeep Dutt [Mon, 5 Oct 2015 17:37:01 +0000 (10:37 -0700)]
Revert "iommu: Allow iova to be used without requiring IOMMU_SUPPORT"
Revert 'commit 353649e5da90 ("iommu: Allow iova to be used without
requiring IOMMU_SUPPORT"). This commit is made unnecessary by
'commit ac6d83ccd9c5 ("misc: mic: Fix SCIF build failure with
IOMMU_SUPPORT disabled") and will create a conflict upon merging
with 4.3-rc4. The correct long term solution is to move the iova
library from drivers/iommu into lib/iova which will be done in
a future patch.
Cc: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vignesh R [Mon, 14 Sep 2015 17:54:33 +0000 (10:54 -0700)]
w1: masters: omap_hdq: add support for 1-wire mode
This patches makes following changes to omap_hdq driver
- Enable 1-wire mode.
- Implement w1_triplet callback to facilitate search rom
procedure and auto detection of 1-wire slaves.
- Proper enabling and disabling of interrupt.
- Cleanups (formatting and return value checks).
HDQ mode remains unchanged.
Signed-off-by: Vignesh R <vigneshr@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> Cc: Vignesh R <vigneshr@ti.com> Cc: NeilBrown <neilb@suse.de> Cc: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/w1/w1_int.c: call put_device if device_register fails
Currently, memsetting and kfreeing the device is bad behaviour. The
device will have a reference count of 1 and hence can cause trouble
because it has kfree'd. Proper way to handle a failed device_register is
to call put_device right after it fails.
memory: fsl-corenet: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Sun, 4 Oct 2015 20:38:40 +0000 (13:38 -0700)]
misc: mic: Fix SCIF build failure with IOMMU_SUPPORT disabled
SCIF depends on IOVA which requires IOMMU_SUPPORT to be enabled.
The long term fix is to move IOVA from drivers/iommu to lib/
but this current patch should fix the reported issue.
Memory Storage Unit (MSU) is a trace output device that collects trace
data to system memory. It consists of 2 independent Memory Storage
Controllers (MSCs).
This driver provides userspace interfaces to configure in-memory tracing
parameters, such as contiguous (high-order allocation) buffer or multiblock
(scatter list) buffer mode, wrapping (data overwrite) and number and sizes
of windows in multiblock mode. Userspace can read the buffers via mmap()ing
or read()ing of the corresponding device node.
Software Trace Hub (STH) is a trace source device in the Intel TH
architecture, it generates data that then goes through the switch into
one or several output ports.
STH collects data from software sources using the stm device class
abstraction.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Global Trace Hub (GTH) is the central component of Intel TH architecture;
it carries out switching between the trace sources and trace outputs, can
enable/disable tracing, perform STP encoding, internal buffering, control
backpressure from outputs to sources and so on.
This property is also reflected in the software model; GTH (switch) driver
is required for the other subdevices to probe, because it matches trace
output devices against its output ports and configures them accordingly.
It also implements an interface for output ports to request trace enabling
or disabling and a few other useful things.
For userspace, it provides an attribute group "masters", which allows
configuration of per-master trace output destinations for up to master 255
and "256+" meaning "masters 256 and above". It also provides an attribute
group to discover and configure some of the parameters of its output ports,
called "outputs". Via these the user can set up data retention policy for
an individual output port or check if it is in reset state.
intel_th: Add pci glue layer for Intel(R) Trace Hub
This patch adds basic support for PCI-based Intel TH devices. It requests
2 bars (configuration registers for the subdevices and STH channel MMIO
region) and calls into Intel TH core code to create the bus with subdevices
etc.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
intel_th: Add driver infrastructure for Intel(R) Trace Hub devices
Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that
produce, switch and output trace data from multiple hardware and
software sources over several types of trace output ports encoded
in System Trace Protocol (MIPI STPv2) and is intended to perform
full system debugging.
For these subdevices, we create a bus, where they can be discovered
and configured by userspace software.
This patch creates this bus infrastructure, three types of devices
(source, output, switch), resource allocation, some callback mechanisms
to facilitate communication between the subdevices' drivers and some
common sysfs attributes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
stm class: Introduce an abstraction for System Trace Module devices
A System Trace Module (STM) is a device exporting data in System Trace
Protocol (STP) format as defined by MIPI STP standards. Examples of such
devices are Intel(R) Trace Hub and Coresight STM.
This abstraction provides a unified interface for software trace sources
to send their data over an STM device to a debug host. In order to do
that, such a trace source needs to be assigned a pair of master/channel
identifiers that all the data from this source will be tagged with. The
STP decoder on the debug host side will use these master/channel tags to
distinguish different trace streams from one another inside one STP
stream.
This abstraction provides a configfs-based policy management mechanism
for dynamic allocation of these master/channel pairs based on trace
source-supplied string identifier. It has the flexibility of being
defined at runtime and at the same time (provided that the policy
definition is aligned with the decoding end) consistency.
For userspace trace sources, this abstraction provides write()-based and
mmap()-based (if the underlying stm device allows this) output mechanism.
For kernel-side trace sources, we provide "stm_source" device class that
can be connected to an stm device at run time.
Linus Torvalds [Sun, 4 Oct 2015 15:31:13 +0000 (16:31 +0100)]
Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull strscpy string copy function implementation from Chris Metcalf.
Chris sent this during the merge window, but I waffled back and forth on
the pull request, which is why it's going in only now.
The new "strscpy()" function is definitely easier to use and more secure
than either strncpy() or strlcpy(), both of which are horrible nasty
interfaces that have serious and irredeemable problems.
strncpy() has a useless return value, and doesn't NUL-terminate an
overlong result. To make matters worse, it pads a short result with
zeroes, which is a performance disaster if you have big buffers.
strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking
the insane NUL padding, but having a differently broken return value
which returns the original length of the source string. Which means
that it will read characters past the count from the source buffer, and
you have to trust the source to be properly terminated. It also makes
error handling fragile, since the test for overflow is unnecessarily
subtle.
strscpy() avoids both these problems, guaranteeing the NUL termination
(but not excessive padding) if the destination size wasn't zero, and
making the overflow condition very obvious by returning -E2BIG. It also
doesn't read past the size of the source, and can thus be used for
untrusted source data too.
So why did I waffle about this for so long?
Every time we introduce a new-and-improved interface, people start doing
these interminable series of trivial conversion patches.
And every time that happens, somebody does some silly mistake, and the
conversion patch to the improved interface actually makes things worse.
Because the patch is mindnumbing and trivial, nobody has the attention
span to look at it carefully, and it's usually done over large swatches
of source code which means that not every conversion gets tested.
So I'm pulling the strscpy() support because it *is* a better interface.
But I will refuse to pull mindless conversion patches. Use this in
places where it makes sense, but don't do trivial patches to fix things
that aren't actually known to be broken.
* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: use global strscpy() rather than private copy
string: provide strscpy()
Make asm/word-at-a-time.h available on all architectures
Stephen Boyd [Fri, 28 Aug 2015 19:21:42 +0000 (12:21 -0700)]
spmi: pmic-arb: Don't byte swap when reading/writing FIFO
We don't want to swap bytes that we're reading and writing to the
FIFOs when we're running on a big-endian CPU. Doing so causes
problems like where the qcom-spmi-iadc driver can't detect the
type of device because the bytes are all mixed up. Use the raw IO
accessors for these API instead, and collapse pmic_arb_base_read()
into the byte reading API so that we aren't tempted to read non-FIFO
data like commands with that function.
Cc: Andy Gross <agross@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify the behavior of the first start of the balloon and a reset. Also on
unload, declare that the balloon driver does not have any capabilities
anymore.
Acked-by: Andy King <acking@vmware.com> Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use 2 MB pages as the hypervisor is alwys 64bit and 2 MB is the smallest
supported super-page size.
The code has to run on older versions of ESX and old balloon drivers run on
newer version of ESX. Hence match the capabilities with the host before 2m
page ballooning could be enabled.
VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode.
When VMware's hypervisor requests a VM to reclaim memory this is preferrably done
via ballooning. If the balloon driver does not return memory fast enough, more
drastic methods, such as hypervisor-level swapping are needed. These other methods
cause performance issues, e.g. hypervisor-level swapping requires the hypervisor to
swap in a page syncronously while the virtual CPU is blocked.
Hence it is in the interest of the VM to balloon memory as fast as possible. The
problem with doing this is that the VM might end up doing nothing else than
ballooning and the user might notice that the VM is stalled, esp. when the VM has
only a single virtual CPU.
This is less of a problem if the VM and the hypervisor perform balloon operations
faster. Also the balloon driver yields regularly, hence on a single virtual CPU
the Linux scheduler should be able to properly time-slice between ballooning and
other tasks.
Testing Done: quickly ballooned a lot of pages while wathing if there are any
perceived hickups (periods of non-responsiveness) in the execution of the
linux VM. No such hickups were seen.
VMware balloon: Update balloon target on each lock/unlock.
Instead of waiting for the next GET_TARGET command, we can react faster
by exploiting the fact that each hypervisor call also returns the
balloon target.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Philip P. Moltmann <moltmann@vmware.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new capability to the driver that allow sending 512 pages in
one hypervisor call. This reduce the cost of the driver when reclaiming
memory.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Philip P. Moltmann <moltmann@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If kzalloc() fails then gms is NULL and we are returning NULL, but the
functions which called this function gru_register_mmu_notifier() are not
expecting NULL as the return. They are expecting either a valid pointer
or the error code in ERR_PTR.
misc: mic: SCIF RMA nodeqp and minor miscellaneous changes
This patch adds the SCIF kernel node QP control messages required to
enable SCIF RMAs. Examples of such node QP control messages include
registration, unregistration, remote memory allocation requests,
remote memory unmap and SCIF remote fence requests.
The patch also updates the SCIF driver with minor changes required to
enable SCIF RMAs by adding the new files to the build, initializing
RMA specific information during SCIF endpoint creation, reserving SCIF
DMA channels, initializing SCIF RMA specific global data structures,
adding the IOCTL hooks required for SCIF RMAs and updating RMA
specific debugfs hooks.
This patch implements the fence APIs required to synchronize
DMAs. SCIF provides an interface to return a "mark" for all DMAs
programmed at the instant the API was called. Users can then "wait" on
the mark provided previously by blocking inside the kernel. Upon
receipt of a DMA completion interrupt the waiting thread is woken
up. There is also an interface to signal DMA completion by polling for
a location to be updated via a "signal" cookie to avoid the interrupt
overhead in the mark/wait interface. SCIF allows programming fences on
both the local and the remote node for both the mark/wait or the fence
signal APIs.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCIF allows users to read from or write to registered remote memory
via CPU copies or DMA. The API verifies that both local and remote
windows are valid before initiating the CPU or DMA transfers. SCIF has
optimized algorithms for handling byte aligned as well as cache line
aligned DMA engines. A registration cache is maintained to avoid the
overhead of pinning pages repeatedly if buffers are reused. The
registration cache is invalidated upon receipt of MMU notifier
callbacks. SCIF windows are destroyed and the pages are unpinned only
once all prior DMAs initiated using that window are drained. Users can
request synchronous DMA operations as well as tail byte ordering if
required. CPU copies are always performed synchronously.
This patch implements the SCIF mmap/munmap interface. A similar
capability is provided to kernel clients via the
scif_get_pages()/scif_put_pages() APIs. The SCIF mmap interface
queries to check if a window is valid and then remaps the local
virtual address to the remote physical pages. These mappings are
subsequently destroyed upon receipt of the VMA close operation or
scif_get_pages(). This functionality allows SCIF users to directly
access remote memory without any driver interaction once the mappings
are created thereby providing bare-metal PCIe latency. These mappings
are zapped to avoid RMA accesses from user space, if a Coprocessor is
reset.
This patch adds the implementation for operations performed on the
list of SCIF windows. Examples of such operations includes adding the
windows to the list of registered (or cached) windows, querying the
list of self or remote windows and unregistering windows. The query
operation is used by SCIF APIs which initiate DMAs, CPU copies or
fences to ensure that a window remains valid during a transfer.
misc: mic: SCIF memory registration and unregistration
This patch implements the SCIF APIs required to pin and unpin
pages. SCIF registration locks down the pages. It then sends a remote
window allocation request to the peer. Once the peer has allocated
memory, the local SCIF endpoint copies the pinned page information to
the peer and notifies the peer once the copy has complete. The peer
upon receipt of the registration notification adds the new remote
window to its list. At this point the window page information is
available on both self and remote nodes so that they can start
performing SCIF DMAs, CPU copies and fences. The unregistration API
tears down the registration at both self and remote nodes.
This patch adds the internal data structures required to perform SCIF
RMAs. The data structures required to maintain per SCIF endpoint, RMA
information are contained in scif_endpt_rma_info. scif_pinned_pages
describes a set of SCIF pinned pages maintained locally. The
scif_window is a data structure which contains all the fields required
to describe a SCIF registered window on self and remote nodes. It
contains an offset which is used as a key to perform SCIF DMAs and CPU
copies between self and remote registered windows.
This patch updates the SCIF header file and IOCTL interface with the
changes required to support RMAs. APIs added include the ability to
pin pages and register those pages with SCIF. SCIF kernel clients can
also add references to remote registered pages and access them via the
CPU. The user space IOCTL interface has been updated to enable SCIF
registration, RDMA/CPU copies and fence APIs for RDMA synchronization.
Ashutosh Dixit [Wed, 30 Sep 2015 01:14:30 +0000 (18:14 -0700)]
misc: mic: Update MIC host daemon with COSM changes
This patch updates the MIC host daemon to work with corresponding
changes in COSM. Other MIC daemon fixes, cleanups and enhancements as
are also rolled into this patch. Changes to MIC sysfs ABI which go
into effect with this patch are also documented.
Ashutosh Dixit [Wed, 30 Sep 2015 01:13:54 +0000 (18:13 -0700)]
misc: mic: Remove COSM functionality from the MIC card driver
Since card side COSM functionality, to trigger MIC device shutdowns
and communicate shutdown status to the host, is now moved into a
separate COSM client driver, this patch removes this functionality
from the base MIC card driver. The mic_bus driver is also updated to
use the device index provided by COSM rather than maintain its own
device index.
Ashutosh Dixit [Wed, 30 Sep 2015 01:13:26 +0000 (18:13 -0700)]
misc: mic: Remove COSM functionality from the MIC host driver
Since COSM functionality is now moved into a separate COSM driver
drivers, this patch removes this functionality from the base MIC host
driver. The MIC host driver now implements cosm_hw_ops and registers a
COSM device which allows the COSM driver to trigger
boot/shutdown/reset of the MIC devices via the cosm_hw_ops.
Ashutosh Dixit [Wed, 30 Sep 2015 01:13:03 +0000 (18:13 -0700)]
misc: mic: COSM client driver
The COSM client driver running on the MIC cards is implemented as a
kernel mode SCIF client. It responds to a "shutdown" message from the
host by triggering a card shutdown and also communicates the shutdown
or reboot status back the host. It is also responsible for syncing the
card time to that of the host. Because SCIF messaging cannot be used
in a panic context, the COSM client driver also periodically sends a
heartbeat SCIF message to the host thereby enabling the host to detect
card crashes.
Ashutosh Dixit [Wed, 30 Sep 2015 01:12:48 +0000 (18:12 -0700)]
misc: mic: COSM SCIF server
The COSM driver communicates with the MIC cards over SCIF. A SCIF
"server" listens for incoming connections from "client" MIC cards as
they boot. After the connection is accepted a separate work item is
scheduled for each MIC card. This work item normally stays blocked in
scif_poll but wakes up to process messages from the card.
The SCIF connection between the host and card COSM components is used
to (a) send the command to shut down the card (b) receive shutdown
status back from the card upon completion of shutdown (c) receive
periodic heartbeat messages to detect card crashes (d) send host time
to the card to enable the card to sync its time to the host.
Ashutosh Dixit [Wed, 30 Sep 2015 01:12:27 +0000 (18:12 -0700)]
misc: mic: Coprocessor State Management (COSM) driver
The COSM driver allows boot, shutdown and reset of Intel MIC devices
via sysfs. This functionality was previously present in the Intel MIC
host driver but has now been taken out into a separate driver so that
it can be shared between multiple generations of Intel MIC products.
The sysfs kernel ABI used by the COSM driver is the same as that
defined originally for the MIC host driver in
Documentation/ABI/testing/sysfs-class-mic.txt.
The COSM driver also contains support for dumping the MIC card log_buf
and doing a "force reset" for the card via debugfs. The OSPM support
present in the MIC host driver has now largely been moved to user
space and only a small required OSPM functionality is now present in
the driver.
Ashutosh Dixit [Wed, 30 Sep 2015 01:12:03 +0000 (18:12 -0700)]
misc: mic: MIC COSM bus
The MIC COSM bus allows the co-processor state management (COSM)
functionality to be shared between multiple generations of Intel MIC
products. The COSM driver registers itself on the COSM bus. The base
PCIe drivers implement the bus ops and register COSM devices on the
bus, resulting in the COSM driver being probed with the COSM devices.
COSM bus ops, e.g. start, stop, ready, reset, therefore abstract out
common functionality from its specific implementation for individual
generations of MIC products.
Ashutosh Dixit [Wed, 30 Sep 2015 01:11:15 +0000 (18:11 -0700)]
misc: mic: Add support for kernel mode SCIF clients
Add support for registration/de-registration of kernel mode SCIF
clients. SCIF clients are probed with new and existing SCIF peer
devices. Similarly the client remove method is called when SCIF
peer devices are removed.
Changes to SCIF peer device framework necessitated by supporting
kernel mode SCIF clients are also included in this patch.
Ashutosh Dixit [Wed, 30 Sep 2015 01:10:44 +0000 (18:10 -0700)]
misc: mic: SCIF poll
SCIF poll allows both user and kernel mode clients to wait on
events on a SCIF endpoint. These events include availability of
space or data in the SCIF ring buffer, availability of connection
requests on a listening endpoint and completion of connections
when using async connects.
dma: Add support to program MIC x100 status descriptiors
The MIC X100 DMA engine has a special status descriptor which writes
an 8 byte value to a destination location. This is used to signal
completion of all DMA descriptors prior to the status descriptor.
This patch add a new DMA engine API which enables updating a
destination address with an 8 byte immediate data value.
This specific allocation and some others in genwqe are unnecessary flagged
as atomic.
All of genwqe's atomic allocations happen in a context where it's allowed
to sleep. Change these to use GFP_KERNEL.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The warning is a false positive because uio_read doesn't depent on
TASK_INTERRUPTIBLE after copy_to_user so it is safe to silence the
warning by an explicit setting the state to TASK_RUNNING in the path
which might call into TASK_RUNNING.
Reported-by: Andy Grover <agrover@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some SoC specified values store in eFuse,
such as the cpu_leakage and cpu_version,
this driver can expose these values to /sys base on nvmem.
Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Zabel [Wed, 30 Sep 2015 12:55:47 +0000 (13:55 +0100)]
nvmem: imx-ocotp: Add i.MX6 OCOTP driver
This driver handles the i.MX On-Chip OTP Controller found in
i.MX6Q/D, i.MX6S/DL, i.MX6SL, and i.MX6SX SoCs. Currently it
just returns the values stored in the shadow registers.
Linus Torvalds [Sun, 4 Oct 2015 10:47:28 +0000 (11:47 +0100)]
Merge tag 'md/4.3-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Assorted fixes for md in 4.3-rc.
Two tagged for -stable, and one is really a cleanup to match and
improve kmemcache interface.
* tag 'md/4.3-fixes' of git://neil.brown.name/md:
md/bitmap: don't pass -1 to bitmap_storage_alloc.
md/raid1: Avoid raid1 resync getting stuck
md: drop null test before destroy functions
md: clear CHANGE_PENDING in readonly array
md/raid0: apply base queue limits *before* disk_stack_limits
md/raid5: don't index beyond end of array in need_this_block().
raid5: update analysis state for failed stripe
md: wait for pending superblock updates before switching to read-only
Linus Torvalds [Sun, 4 Oct 2015 10:41:58 +0000 (11:41 +0100)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This week's round of MIPS fixes:
- Fix JZ4740 build
- Fix fallback to GFP_DMA
- FP seccomp in case of ENOSYS
- Fix bootmem panic
- A number of FP and CPS fixes
- Wire up new syscalls
- Make sure BPF assembler objects can properly be disassembled
- Fix BPF assembler code for MIPS I"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: scall: Always run the seccomp syscall filters
MIPS: Octeon: Fix kernel panic on startup from memory corruption
MIPS: Fix R2300 FP context switch handling
MIPS: Fix octeon FP context switch handling
MIPS: BPF: Fix load delay slots.
MIPS: BPF: Do all exports of symbols with FEXPORT().
MIPS: Fix the build on jz4740 after removing the custom gpio.h
MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT
MIPS: CPS: Don't include MT code in non-MT kernels.
MIPS: CPS: Stop dangling delay slot from has_mt.
MIPS: dma-default: Fix 32-bit fall back to GFP_DMA
MIPS: Wire up userfaultfd and membarrier syscalls.
Linus Torvalds [Sun, 4 Oct 2015 10:40:09 +0000 (11:40 +0100)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"This update contains:
- Fix for a long standing race affecting /proc/irq/NNN
- One line fix for ARM GICV3-ITS counting the wrong data
- Warning silencing in ARM GICV3-ITS. Another GCC trying to be
overly clever issue"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Count additional LPIs for the aliased devices
irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined
genirq: Fix race in register_irq_proc()
MIPS: scall: Always run the seccomp syscall filters
The MIPS syscall handler code used to return -ENOSYS on invalid
syscalls. Whilst this is expected, it caused problems for seccomp
filters because the said filters never had the change to run since
the code returned -ENOSYS before triggering them. This caused
problems on the chromium testsuite for filters looking for invalid
syscalls. This has now changed and the seccomp filters are always
run even if the syscall is invalid. We return -ENOSYS once we
return from the seccomp filters. Moreover, similar codepaths have
been merged in the process which simplifies somewhat the overall
syscall code.
Linus Torvalds [Sat, 3 Oct 2015 14:53:05 +0000 (10:53 -0400)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fixes all around the map: W+X kernel mapping fix, WCHAN fixes, two
build failure fixes for corner case configs, x32 header fix and a
speling fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds
x86/mm: Set NX on gap between __ex_table and rodata
x86/kexec: Fix kexec crash in syscall kexec_file_load()
x86/process: Unify 32bit and 64bit implementations of get_wchan()
x86/process: Add proper bound checks in 64bit get_wchan()
x86, efi, kasan: Fix build failure on !KASAN && KMEMCHECK=y kernels
x86/hyperv: Fix the build in the !CONFIG_KEXEC_CORE case
x86/cpufeatures: Correct spelling of the HWP_NOTIFY flag
Linus Torvalds [Sat, 3 Oct 2015 14:46:41 +0000 (10:46 -0400)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two EFI fixes: one for x86, one for ARM, fixing a boot crash bug that
can trigger under newer EFI firmware"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/efi: Fix boot crash by not padding between EFI_MEMORY_RUNTIME regions
x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down
Linus Torvalds [Sat, 3 Oct 2015 14:39:31 +0000 (10:39 -0400)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Bunch of fixes all over the place, all pretty small: amdgpu, i915,
exynos, one qxl and one vmwgfx.
There is also a bunch of mst fixes, I left some cleanups in the series
as I didn't think it was worth splitting up the tested series"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (37 commits)
drm/dp/mst: add some defines for logical/physical ports
drm/dp/mst: drop cancel work sync in the mstb destroy path (v2)
drm/dp/mst: split connector registration into two parts (v2)
drm/dp/mst: update the link_address_sent before sending the link address (v3)
drm/dp/mst: fixup handling hotplug on port removal.
drm/dp/mst: don't pass port into the path builder function
drm/radeon: drop radeon_fb_helper_set_par
drm: handle cursor_set2 in restore_fbdev_mode
drm/exynos: Staticize local function in exynos_drm_gem.c
drm/exynos: fimd: actually disable dp clock
drm/exynos: dp: remove suspend/resume functions
drm/qxl: recreate the primary surface when the bo is not primary
drm/amdgpu: only print meaningful VM faults
drm/amdgpu/cgs: remove import_gpu_mem
drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2
drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2
drm/vmwgfx: Fix a command submission hang regression
drm/exynos: remove unused mode_fixup() code
drm/exynos: remove decon_mode_fixup()
drm/exynos: remove fimd_mode_fixup()
...
Linus Torvalds [Fri, 2 Oct 2015 21:53:25 +0000 (17:53 -0400)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
"Fixes for two recent regressions (in Synaptics PS/2 and uinput
drivers) and some more driver fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - fix handling of disabling gesture mode"
Input: psmouse - fix data race in __ps2_command
Input: elan_i2c - add all valid ic type for i2c/smbus
Input: zhenhua - ensure we have BITREVERSE
Input: omap4-keypad - fix memory leak
Input: serio - fix blocking of parport
Input: uinput - fix crash when using ABS events
Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF
Input: elan_i2c - add ic type 0x03
Input: elan_i2c - don't require known iap version
Input: imx6ul_tsc - fix controller name
Input: imx6ul_tsc - use the preferred method for kzalloc()
Input: imx6ul_tsc - check for negative return value
Input: imx6ul_tsc - propagate the errors
Input: walkera0701 - fix abs() calculations on 64 bit values
Input: mms114 - remove unneded semicolons
Input: pm8941-pwrkey - remove unneded semicolon
Input: fix typo in MT documentation
Input: cyapa - fix address of Gen3 devices in device tree documentation
Linus Torvalds [Fri, 2 Oct 2015 18:51:46 +0000 (14:51 -0400)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
"Summary:
- Fix for accidental modification of arguments of syscall functions
- Wire up new syscalls
- Update defconfigs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.3-rc1
m68k: Define asmlinkage_protect
m68k: Wire up membarrier
m68k: Wire up userfaultfd
m68k: Wire up direct socket calls
Marc Zyngier [Fri, 2 Oct 2015 15:44:06 +0000 (16:44 +0100)]
irqchip/gic-v3-its: Count additional LPIs for the aliased devices
When configuring the interrupt mapping for a new device, we
iterate over all the possible aliases to account for their
maximum MSI allocation. This was introduced by e8137f4f5088
("irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration").
Turns out that the code doing that is a bit braindead, and repeatedly
accounts for the same device over and over.
Fix this by counting the actual alias that is passed to us by the
core code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Alex Shi <alex.shi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Marc Zyngier [Fri, 2 Oct 2015 15:44:05 +0000 (16:44 +0100)]
irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined
More agressive inlining in recent versions of GCC have uncovered
a new set of warnings:
drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare:
drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used
uninitialized in this function [-Wmaybe-uninitialized]
dev->event_map.lpi_base = lpi_base;
^
drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here
int lpi_base;
^
drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used
uninitialized in this function [-Wmaybe-uninitialized]
dev->event_map.nr_lpis = nr_lpis;
^
drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here
int nr_lpis;
^
The warning is fairly benign (there is no code path that could
actually use uninitialized variables), but let's silence it anyway
by zeroing the variables on the error path.
Reported-by: Alex Shi <alex.shi@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Fri, 2 Oct 2015 18:46:15 +0000 (14:46 -0400)]
Merge tag 'dmaengine-fix-4.3-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This contains fixes spread throughout the drivers, and also fixes one
more instance of privatecnt in dmaengine.
Driver fixes summary:
- bunch of pxa_dma fixes for reuse of descriptor issue, residue and
no-requestor
- odd fixes in xgene, idma, sun4i and zxdma
- at_xdmac fixes for cleaning descriptor and block addr mode"
* tag 'dmaengine-fix-4.3-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: pxa_dma: fix residue corner case
dmaengine: pxa_dma: fix the no-requestor case
dmaengine: zxdma: Fix off-by-one for testing valid pchan request
dmaengine: at_xdmac: clean used descriptor
dmaengine: at_xdmac: change block increment addressing mode
dmaengine: dw: properly read DWC_PARAMS register
dmaengine: xgene-dma: Fix overwritting DMA tx ring
dmaengine: fix balance of privatecnt
dmaengine: sun4i: fix unsafe list iteration
dmaengine: idma64: improve residue estimation
dmaengine: xgene-dma: fix handling xgene_dma_get_ring_size result
dmaengine: pxa_dma: fix initial list move
Linus Torvalds [Fri, 2 Oct 2015 18:40:57 +0000 (14:40 -0400)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Another week, another round of fixes.
These have been brewing for a bit and in various iterations, but I
feel pretty comfortable about the quality of them. They fix real
issues. The pull request is mostly blk-mq related, and the only one
not fixing a real bug, is the tag iterator abstraction from Christoph.
But it's pretty trivial, and we'll need it for another fix soon.
Apart from the blk-mq fixes, there's an NVMe affinity fix from Keith,
and a single fix for xen-blkback from Roger fixing failure to free
requests on disconnect"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: factor out a helper to iterate all tags for a request_queue
blk-mq: fix racy updates of rq->errors
blk-mq: fix deadlock when reading cpu_list
blk-mq: avoid inserting requests before establishing new mapping
blk-mq: fix q->mq_usage_counter access race
blk-mq: Fix use after of free q->mq_map
blk-mq: fix sysfs registration/unregistration race
blk-mq: avoid setting hctx->tags->cpumask before allocation
NVMe: Set affinity after allocating request queues
xen/blkback: free requests on disconnection
Dmitry Torokhov [Fri, 2 Oct 2015 17:31:32 +0000 (10:31 -0700)]
Revert "Input: synaptics - fix handling of disabling gesture mode"
This reverts commit e51e38494a8ecc18650efb0c840600637891de2c: we
actually do want the device to work in extended W mode, as this is the
mode that allows us receiving multiple contact information.
Matt Bennett [Wed, 30 Sep 2015 04:40:42 +0000 (17:40 +1300)]
MIPS: Octeon: Fix kernel panic on startup from memory corruption
During development it was found that a number of builds would panic
during the kernel init process, more specifically in 'delayed_fput()'.
The panic showed the kernel trying to access a memory address of
'0xb7fdc00' while traversing the 'delayed_fput_list' structure.
Comparing this memory address to the value of the pointer used on
builds that did not panic confirmed that the pointer on crashing
builds must have been corrupted at some stage earlier in the init
process.
By traversing the list earlier and earlier in the code it was found
that 'plat_mem_setup()' was responsible for corrupting the list.
Specifically the line:
Where 'new_ent_addr'=0x4800000 (the address of 'delayed_fput_list')
and the second argument (size)=0xb7fdc00 (the address causing the
kernel panic). The job of this part of 'plat_mem_setup()' is to
allocate chunks of memory for the kernel to use. At the start of
each chunk of memory the size of the chunk is written, hence the
value 0xb7fdc00 is written onto memory at 0x4800000, therefore the
kernel panics when it goes back to access 'delayed_fput_list' later
on in the initialisation process.
On builds that were not crashing it was found that the compiler had
placed 'delayed_fput_list' at 0x4800008, meaning it wasn't corrupted
(but something else in memory was overwritten).
As can be seen in the first function call above the code begins to
allocate chunks of memory beginning from the symbol '__init_end'.
The MIPS linker script (vmlinux.lds.S) however defines the .bss
section to begin after '__init_end'. Therefore memory within the
.bss section is allocated to the kernel to use (System.map shows
'delayed_fput_list' and other kernel structures to be in .bss).
To stop the kernel panic (and the .bss section being corrupted)
memory should begin being allocated from the symbol '_end'.
Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: aleksey.makarov@auriga.com
Patchwork: https://patchwork.linux-mips.org/patch/11251/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Mon, 21 Sep 2015 17:07:42 +0000 (10:07 -0700)]
MIPS: Fix R2300 FP context switch handling
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP
context saving from the asm-written resume function in favour of reusing
existing code to perform the same task. However it only removed the FP
context saving code from the r4k_switch.S implementation of resume.
Remove it from the r2300_switch.S implementation too in order to prevent
attempting to save the FP context twice, which would likely lead to an
exception from the second save because the FPU had already been disabled
by the first save.
This patch has only been build tested, using rbtx49xx_defconfig.
Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Manuel Lauss <manuel.lauss@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/11167/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Mon, 21 Sep 2015 17:07:41 +0000 (10:07 -0700)]
MIPS: Fix octeon FP context switch handling
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP
context saving from the asm-written resume function in favour of reusing
existing code to perform the same task. However it only removed the FP
context saving code from the r4k_switch.S implementation of resume.
Octeon uses its own implementation in octeon_switch.S, so remove FP
context saving there too in order to prevent attempting to save context
twice. That formerly led to an exception from the second save as follows
because the FPU had already been disabled by the first save:
Linus Torvalds [Fri, 2 Oct 2015 12:03:04 +0000 (08:03 -0400)]
Merge tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.3 rc4:
MMC core:
- Allow users of mmc_of_parse() to succeed when CONFIG_GPIOLIB is
unset
- Prevent infinite loop of re-tuning for CRC-errors for CMD19 and
CMD21
* tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: core: fix dead loop of mmc_retune
mmc: pxamci: fix card detect with slot-gpio API
mmc: sunxi: Fix clk-delay settings
mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset
projects / linux-beck.git / log