Calling omap_sham_handle_queue from "done" tasklet should be done
after irq scheduled tasklet completes.
Having additional tasklet does not solve that issue because it might
be execute before.
So queue handling tasklet has been removed and functionality integrated
into single tasklet.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dmitry Kasatkin [Thu, 2 Jun 2011 18:10:06 +0000 (21:10 +0300)]
crypto: omap-sham - replace flags operation with atomic bit operations
Some flags are changed in interrupt handlers and verified in the tasklet.
There might be a race condition when tasklet is interrupted or another
cpu/core will run IRQ handler and tasklet in parallel.
Atomic bitops functions are now used instead of bitmask operations.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dmitry Kasatkin [Thu, 2 Jun 2011 18:10:05 +0000 (21:10 +0300)]
crypto: omap-sham - replace flags bit mask with bit number
Flags mask cannot be used with atomic bit operations.
This patch changes masks to bit numbers.
Atomic bit operations will be used by following patches.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
e1 = clk_get@p1(...);
... when != e1 = e2
when != clk_put(e1)
when any
if (...) { ... when != clk_put(e1)
when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
} else S
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
e1 = clk_get@p1(...);
... when != e1 = e2
when != clk_put(e1)
when any
if (...) { ... when != clk_put(e1)
when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
} else S
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jarod Wilson [Tue, 31 May 2011 05:23:57 +0000 (15:23 +1000)]
crypto: testmgr - add xts-aes-256 self-test
FIPS compliance requires a known-answer self-test for all approved
cipher and mode combinations, for all valid key sizes. Presently,
there are only self-tests for xts-aes-128. This adds a 256-bit one,
pulled from the same reference document, which should satisfy the
requirement.
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kim Phillips [Thu, 26 May 2011 03:30:34 +0000 (13:30 +1000)]
crypto: caam - fix operator precedence in shared descriptor allocation
setkey allocates 16 bytes (CAAM_CMD_SZ *
DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to
store the shared descriptor, resulting in memory
corruption. Fix this.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Mon, 27 Jun 2011 02:39:22 +0000 (19:39 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
cifs: propagate errors from cifs_get_root() to mount(2)
cifs: tidy cifs_do_mount() up a bit
cifs: more breakage on mount failures
cifs: close sget() races
cifs: pull freeing mountdata/dropping nls/freeing cifs_sb into cifs_umount()
cifs: move cifs_umount() call into ->kill_sb()
cifs: pull cifs_mount() call up
sanitize cifs_umount() prototype
cifs: initialize ->tlink_tree in cifs_setup_cifs_sb()
cifs: allocate mountdata earlier
cifs: leak on mount if we share superblock
cifs: don't pass superblock to cifs_mount()
cifs: don't leak nls on mount failure
cifs: double free on mount failure
take bdi setup/destruction into cifs_mount/cifs_umount
Linus Torvalds [Sat, 25 Jun 2011 14:23:27 +0000 (07:23 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: Remove unneeded version.h includes from sound/
ASoC: pxa-ssp: Correct check for stream presence
ASoC: imx: add missing module informations
ASoC: imx: Remove unused Kconfig SND_MXC_SOC_SSI entry
ALSA: HDA: Pinfix quirk for HP Z200 Workstation
ALSA: VIA HDA: Create a master amplifier control for VT1718S.
ALSA: VIA HDA: Mute/unmute mixer conncted to Headphone for VT1718S.
ALSA: VIA HDA: Modify initial verbs list for VT1718S.
ALSA: hda - Remove ALC268 model override for CPR2000
ALSA: HDA: Remove quirk for an HP device
ASoC: Remove unused and about to be broken SND_SOC_CUSTOM I/O bus
Linus Torvalds [Sat, 25 Jun 2011 05:01:40 +0000 (22:01 -0700)]
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
drm/i915: save/resume forcewake lock fixes
Revert "drm/i915: Kill GTT mappings when moving from GTT domain"
drm/i915: Apply HWSTAM workaround for BSD ring on SandyBridge
drm/i915: Call intel_enable_plane from i9xx_crtc_mode_set (again)
Al Viro [Fri, 17 Jun 2011 13:50:44 +0000 (09:50 -0400)]
cifs: more breakage on mount failures
if cifs_get_root() fails, we end up with ->mount() returning NULL,
which is not what callers expect. Moreover, in case of superblock
reuse we end up leaking a superblock reference...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 17 Jun 2011 13:32:10 +0000 (09:32 -0400)]
cifs: move cifs_umount() call into ->kill_sb()
instead of calling it manually in case if cifs_read_super() fails
to set ->s_root, just call it from ->kill_sb(). cifs_put_super()
is gone now *and* we have cifs_sb shutdown and destruction done
after the superblock is gone from ->s_instances.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 17 Jun 2011 13:05:48 +0000 (09:05 -0400)]
cifs: don't pass superblock to cifs_mount()
To close sget() races we'll need to be able to set cifs_sb up before
we get the superblock, so we'll want to be able to do cifs_mount()
earlier. Fortunately, it's easy to do - setting ->s_maxbytes can
be done in cifs_read_super(), ditto for ->s_time_gran and as for
putting MS_POSIXACL into ->s_flags, we can mirror it in ->mnt_cifs_flags
until cifs_read_super() is called. Kill unused 'devname' argument,
while we are at it...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 17 Jun 2011 12:49:12 +0000 (08:49 -0400)]
cifs: don't leak nls on mount failure
if cifs_sb allocation fails, we still need to drop nls we'd stashed
into volume_info - the one we would've copied to cifs_sb if we could
allocate the latter.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 17 Jun 2011 12:34:57 +0000 (08:34 -0400)]
cifs: double free on mount failure
if we get to out_super with ->s_root already set (e.g. with
cifs_get_root() failure), we'll end up with cifs_put_super()
called and ->mountdata freed twice. We'll also get cifs_sb
freed twice and cifs_sb->local_nls dropped twice. The problem
is, we can get to out_super both with and without ->s_root,
which makes ->put_super() a bad place for such work.
Switch to ->kill_sb(), have all that work done there after
kill_anon_super(). Unlike ->put_super(), ->kill_sb() is
called by deactivate_locked_super() whether we have ->s_root
or not.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jeff Layton [Tue, 21 Jun 2011 11:18:26 +0000 (07:18 -0400)]
cifs: mark CONFIG_CIFS_NFSD_EXPORT as BROKEN
This does not work properly with CIFS as current servers do not
enable support for the FILE_OPEN_BY_FILE_ID on SMB NTCreateX
and not all NFS clients handle ESTALE.
For now, it just plain doesn't work. Mark it BROKEN to discourage
distros from enabling it.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Mon, 20 Jun 2011 18:33:16 +0000 (14:33 -0400)]
cifs: free blkcipher in smbhash
This is currently leaked in the rc == 0 case.
Reported-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Linus Torvalds [Fri, 24 Jun 2011 15:42:35 +0000 (08:42 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block:
block: add REQ_SECURE to REQ_COMMON_MASK
block: use the passed in @bdev when claiming if partno is zero
block: Add __attribute__((format(printf...) and fix fallout
block: make disk_block_events() properly wait for work cancellation
block: remove non-syncing __disk_block_events() and fold it into disk_block_events()
block: don't use non-syncing event blocking in disk_check_events()
cfq-iosched: fix locking around ioc->ioc_data assignment
Linus Torvalds [Fri, 24 Jun 2011 15:41:36 +0000 (08:41 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_marvell: Add support for 88SE91A0, 88SE91A4
libata/sas: only set FROZEN flag if new EH is supported
libata: apply NOSETXFER horkage to the affected Pioneer drives regardless of firmware revision
drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding'
Linus Torvalds [Fri, 24 Jun 2011 15:39:43 +0000 (08:39 -0700)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: handle special cases for vddc
drm/radeon/kms: fix num_banks tiling config for fusion
Linus Torvalds [Fri, 24 Jun 2011 15:36:16 +0000 (08:36 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86/PCI/ACPI: fix type mismatch
PCI: fix new kernel-doc warning
PCI: Fix warning in drivers/pci/probe.c on sparc64
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix wsize negotiation to respect max buffer size and active signing (try #4)
CIFS: Fix problem with 3.0-rc1 null user mount failure
Jesper Juhl [Thu, 23 Jun 2011 21:54:40 +0000 (23:54 +0200)]
ALSA: Remove unneeded version.h includes from sound/
In the sound/ directory there are two files (flagged by 'make
versioncheck'); sound/pci/asihpi/asihpi.c and
sound/soc/codecs/wm8991.c that include linux/version.h although they
don't need it. This patch removes the unneeded includes.
This patch fixes the following conversion specification warning for size_t
drivers/target/tcm_fc/tfc_io.c: In function ‘ft_queue_data_in’:
drivers/target/tcm_fc/tfc_io.c:209: warning: format ‘%x’ expects type ‘unsigned int’, but argument 5 has type ‘size_t’
Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Kiran Patil [Wed, 22 Jun 2011 23:30:22 +0000 (16:30 -0700)]
tcm_fc: Fix ft_send_tm LUN lookup OOPs
This patch fixes a bug in ft_send_tm() that was incorrectly calling
ft_get_lun_for_cmd() -> transport_get_lun_for_cmd(), instead of using
transport_get_lun_for_tmr() for the proper struct se_lun lookup
that was triggering an OOPs in the se_cmd->tmr_req failure path.
This patch fixes the issue by re-arranging the codepath where
transport_get_lun_for_tmr() is called after tmr request is allocated and
made it available as part of se_cmd.
It also drops the now unnecessary ft_get_lun_for_cmd() unpacking code, and
uses scsilun_to_int() directly ahead of transport_get_lun_for_cmd() and
transport_get_lun_for_tmr() usage.
Signed-off-by: Patil, Kiran <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Dan Carpenter [Mon, 13 Jun 2011 20:10:49 +0000 (23:10 +0300)]
target: Drop bogus ERR_PTR usage in target_fabric_configfs_init
In the original code, there were several places inside the
target_fabric_configfs_init() function that returned NULL on error
and one place the returned an ERR_PTR. There are two places that
call this function and they only check for NULL returns; they don't
check for ERR_PTRs. So I've changed the ERR_PTR so now the function
only returns NULL on error.
Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Roland Dreier [Wed, 22 Jun 2011 08:02:21 +0000 (01:02 -0700)]
target: Convert transport_deregister_session_configfs nacl_sess_lock to save irq state
This patch converts transport_deregister_session_configfs() to save/restore
spinlock IRQ state for struct se_node_acl->nacl_sess_lock access as tcm_qla2xxx
logic expects to call transport_deregister_session_configfs() code with
irq save already held for struct qla_hw_data.
Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes two possible NULL pointer dereferences in target v4.0
code where se_tmr release path in core_tmr_release_req() can OOPs upon
transport_get_lun_for_tmr() failure by attempting to access se_device or
se_tmr->tmr_list without a valid member of se_device->tmr_list during
transport_free_se_cmd() release. This patch moves the se_tmr->tmr_dev
pointer assignment in transport_get_lun_for_tmr() until after possible
-ENODEV failures during unpacked_lun lookup.
This addresses an OOPs originally reported with LIO v4.1 upstream on
.39 code here:
libata/sas: only set FROZEN flag if new EH is supported
On 16.06.2011 [08:28:39 -0500], Brian King wrote:
> On 06/16/2011 02:51 AM, Tejun Heo wrote:
> > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote:
> >>> That looks like the right thing to do. For ipr's usage of
> >>> libata, we don't have the concept of a port frozen state, so this flag
> >>> should really never get set. The alternate way to fix this would be to
> >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler
> >>> is not NULL.
> >>
> >> It seemed like ipr is as you say, but I wasn't sure if it was
> >> appropriate to make the change above in the common libata-scis code or
> >> not. I don't want to break some other device on accident.
> >>
> >> Also, I tried your suggestion, but I don't think that can happen in
> >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like
> >> ap->ops typically gets set only after ata_port_alloc returns?
> >
> > Maybe we can test error_handler in ata_sas_port_start()?
>
> Good point. Since libsas is converted to the new eh now, we would need to have
> this test.
Commit 7b3a24c57d2eeda8dba9c205342b12689c4679f9 ("ahci: don't enable
port irq before handler is registered") caused a regression for CD-ROMs
attached to the IPR SATA bus on Power machines:
ata_port_alloc: ENTER
ata_port_probe: ata1: bus probe begin
ata1.00: ata_dev_read_id: ENTER
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
ata1.00: ata_dev_read_id: ENTER
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
ata1.00: limiting speed to UDMA7:PIO5
ata1.00: ata_dev_read_id: ENTER
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
ata1.00: disabled
ata_port_probe: ata1: bus probe end
scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
The FROZEN flag added in that commit is only cleared by the new EH code,
which is not used by ipr. Clear this flag in the SAS code if we don't
support new EH.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Tejun Heo [Wed, 22 Jun 2011 10:13:10 +0000 (12:13 +0200)]
libata: apply NOSETXFER horkage to the affected Pioneer drives
regardless of firmware revision
It's unlikely NOSETXFER works for a revision of drive but doesn't for
another and pioneer doesn't seem to be fixing firmwares for the
affected drives. Apply NOSETXFER to the affected pioneer drives
regardless of firmware revision.
http://article.gmane.org/gmane.linux.ide/49734
Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fl-00@gmx.de Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Daniel Mack [Wed, 22 Jun 2011 18:48:25 +0000 (20:48 +0200)]
ASoC: pxa-ssp: Correct check for stream presence
Don't rely on the codec's channels_min information to decide wheter or
not allocate a substream's DMA buffer. Rather check if the substream
itself was allocated previously.
Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
CAP_LARGE_WRITEX is ignored when signing is active. Also, the maximum
size for a write without CAP_LARGE_WRITEX should be the maxBuf that
the server sent in the NEGOTIATE request.
Fix the wsize negotiation to take this into account. While we're at it,
alter the other wsize definitions to use sizeof(WRITE_REQ) to allow for
slightly larger amounts of data to potentially be written per request.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Russell King [Wed, 22 Jun 2011 10:55:50 +0000 (11:55 +0100)]
Fix CPU spinlock lockups on secondary CPU bringup
Secondary CPU bringup typically calls calibrate_delay() during its
initialization. However, calibrate_delay() modifies a global variable
(loops_per_jiffy) used for udelay() and __delay().
A side effect of 71c696b1 ("calibrate: extract fall-back calculation
into own helper") introduced in the 2.6.39 merge window means that we
end up with a substantial period where loops_per_jiffy is zero. This
causes the spinlock debugging code to malfunction:
u64 loops = loops_per_jiffy * HZ;
for (;;) {
for (i = 0; i < loops; i++) {
if (arch_spin_trylock(&lock->raw_lock))
return;
__delay(1);
}
...
}
by never calling arch_spin_trylock() - resulting in the CPU locking
up in an infinite loop inside __spin_lock_debug().
Work around this by only writing to loops_per_jiffy only once we have
completed all the calibration decisions.
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@kernel.org> (2.6.39-stable)
--
Better solutions (such as omitting the calibration for secondary CPUs,
or arranging for calibrate_delay() to return the LPJ value and leave
it to the caller to decide where to store it) are a possibility, but
would be much more invasive into each architecture.
I think this is the best solution for -rc and stable, but it should be
revisited for the next merge window.
The driver went to initialize its waitqueue at the start of the main
processing thread. However, it is possible that this thread is not
scheduled on a CPU before the write function is called which leads to a
following error:
William Douglas [Thu, 23 Jun 2011 12:38:36 +0000 (13:38 +0100)]
mrst_max3110: Change max missing message priority.
Change print message to notice instead of error to clean up non critical
messages showing on startup. The MAX3111 not being present is a normal
path for end user systems.
Signed-off-by: William Douglas <william.douglas@intel.com>
[rebased on 3.0, switched to dev_dbg()] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 23 Jun 2011 04:49:07 +0000 (21:49 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
jfs: agstart field must be 64 bits
JFS: Don't save agno in the inode
jfs: Update agstart when resizing volume
jfs: old_agsize should be 64 bits in jfs_extendfs
David Rientjes [Thu, 23 Jun 2011 01:13:04 +0000 (18:13 -0700)]
mm, hotplug: protect zonelist building with zonelists_mutex
Commit 959ecc48fc75 ("mm/memory_hotplug.c: fix building of node hotplug
zonelist") does not protect the build_all_zonelists() call with
zonelists_mutex as needed. This can lead to races in constructing
zonelist ordering if a concurrent build is underway. Protecting this
with lock_memory_hotplug() is insufficient since zonelists can be
rebuild though sysfs as well.
David Rientjes [Thu, 23 Jun 2011 01:13:01 +0000 (18:13 -0700)]
mm, hotplug: fix error handling in mem_online_node()
The error handling in mem_online_node() is incorrect: hotadd_new_pgdat()
returns NULL if the new pgdat could not have been allocated and a pointer
to it otherwise.
mem_online_node() should fail if hotadd_new_pgdat() fails, not the
inverse. This fixes an issue when memoryless nodes are not onlined and
their sysfs interface is not registered when their first cpu is brought
up.
The bug was introduced by commit cf23422b9d76 ("cpu/mem hotplug: enable
CPUs online before local memory online") iow v2.6.35.
Pavel Shilovsky [Mon, 20 Jun 2011 08:33:16 +0000 (12:33 +0400)]
CIFS: Fix problem with 3.0-rc1 null user mount failure
Figured it out: it was broken by b946845a9dc523c759cae2b6a0f6827486c3221a commit - "cifs: cifs_parse_mount_options: do not tokenize mount options in-place". So, as a quick fix I suggest to apply this patch.
[PATCH] CIFS: Fix kfree() with constant string in a null user case
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Ben Widawsky [Wed, 22 Jun 2011 16:55:01 +0000 (09:55 -0700)]
drm/i915: save/resume forcewake lock fixes
The lock must be held for the saving and restoring of VGA state.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> CC: Alexander Zhaunerchyk <alex.vizor@gmail.com> CC: Andrey Rahmatullin <wrar@wrar.name> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
David Howells [Tue, 21 Jun 2011 13:32:05 +0000 (14:32 +0100)]
KEYS: Fix error handling in construct_key_and_link()
Fix error handling in construct_key_and_link().
If construct_alloc_key() returns an error, it shouldn't pass out through
the normal path as the key_serial() called by the kleave() statement
will oops when it gets an error code in the pointer:
David Howells [Tue, 21 Jun 2011 09:29:51 +0000 (10:29 +0100)]
MN10300: asm/uaccess.h needs to #include linux/kernel.h for might_sleep()
MN10300's asm/uaccess.h needs to #include linux/kernel.h to get might_sleep()
otherwise it fails to build on MN10300 allyesconfig. This fails in a few
places with messages like the following:
In file included from security/keys/trusted.c:14:
include/linux/uaccess.h: In function '__copy_from_user_nocache':
include/linux/uaccess.h:52: error: implicit declaration of function 'might_sleep'
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 22 Jun 2011 01:20:55 +0000 (18:20 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix decode_secinfo_maxsz
NFSv4.1: Fix an off-by-one error in pnfs_generic_pg_test
NFSv4.1: Fix some issues with pnfs_generic_pg_test
NFSv4.1: file layout must consider pg_bsize for coalescing
pnfs-obj: No longer needed to take an extra ref at add_device
SUNRPC: Ensure the RPC client only quits on fatal signals
NFSv4: Fix a readdir regression
nfs4.1: mark layout as bad on error path in _pnfs_return_layout
nfs4.1: prevent race that allowed use of freed layout in _pnfs_return_layout
NFSv4.1: need to put_layout_hdr on _pnfs_return_layout error path
NFS: (d)printks should use %zd for ssize_t arguments
NFSv4.1: fix break condition in pnfs_find_lseg
nfs4.1: fix several problems with _pnfs_return_layout
NFSv4.1: allow zero fh array in filelayout decode layout
NFSv4.1: allow nfs_fhget to succeed with mounted on fileid
NFSv4.1: Fix a refcounting issue in the pNFS device id cache
NFSv4.1: deprecate headerpadsz in CREATE_SESSION
NFS41: do not update isize if inode needs layoutcommit
NLM: Don't hang forever on NLM unlock requests
NFS: fix umount of pnfs filesystems
John Stultz [Fri, 17 Jun 2011 01:47:37 +0000 (18:47 -0700)]
alarmtimers: Return -ENOTSUPP if no RTC device is present
Toralf Förster and Richard Weinberger noted that if there is
no RTC device, the alarm timers core prints out an annoying
"ALARM timers will not wake from suspend" message.
This warning has been removed in a previous patch, however
the issue still remains: The original idea was to support
alarm timers even if there was no rtc device, as long as the
system didn't go into suspend.
However, after further consideration, communicating to the application
that alarmtimers are not fully functional seems like the better
solution.
So this patch makes it so we return -ENOTSUPP to any posix _ALARM
clockid calls if there is no backing RTC device on the system.
Further this changes the behavior where when there is no rtc device
we will check for one on clock_getres, clock_gettime, timer_create,
and timer_nsleep instead of on suspend.
CC: Toralf Förster <toralf.foerster@gmx.de> CC: Richard Weinberger <richard@nod.at CC: Peter Zijlstra <peterz@infradead.org> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Reported by: Richard Weinberger <richard@nod.at> Signed-off-by: John Stultz <john.stultz@linaro.org>
John Stultz [Fri, 17 Jun 2011 01:27:09 +0000 (18:27 -0700)]
alarmtimers: Handle late rtc module loading
The alarmtimers code currently picks a rtc device to use at
late init time. However, if your rtc driver is loaded as a module,
it may be registered after the alarmtimers late init code, leaving
the alarmtimers nonfunctional.
This patch moves the the rtcdevice selection to when we actually try
to use it, allowing us to make use of rtc modules that may have been
loaded at any point since bootup.
CC: Thomas Gleixner <tglx@linutronix.de> CC: Meelis Roos <mroos@ut.ee> Reported-by: Meelis Roos <mroos@ut.ee> Signed-off-by: John Stultz <john.stultz@linaro.org>
PCI / PM: Block races between runtime PM and system sleep
After commit e8665002477f0278f84f898145b1f141ba26ee26
(PM: Allow pm_runtime_suspend() to succeed during system suspend) it
is possible that a device resumed by the pm_runtime_resume(dev) in
pci_pm_prepare() will be suspended immediately from a work item,
timer function or otherwise, defeating the very purpose of calling
pm_runtime_resume(dev) from there. To prevent that from happening
it is necessary to increment the runtime PM usage counter of the
device by replacing pm_runtime_resume() with pm_runtime_get_sync().
Moreover, the incremented runtime PM usage counter has to be
decremented by the corresponding pci_pm_complete(), via
pm_runtime_put_sync().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Commit 4d27e9dcff00a6425d779b065ec8892e4f391661 (PM: Make power
domain callbacks take precedence over subsystem ones) forgot to
update the device power management documentation to take changes
made by it into account. Correct that mistake.
PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset
Commit 85eb8c8d0b0900c073b0e6f89979ac9c439ade1a (PM / Runtime:
Generic clock manipulation rountines for runtime PM (v6)) converted
the shmobile platform to using generic code for runtime PM clock
management, but it changed the behavior for CONFIG_PM_RUNTIME unset
incorrectly.
Specifically, for CONFIG_PM_RUNTIME unset pm_runtime_clk_notify()
should enable clocks for action equal to BUS_NOTIFY_BIND_DRIVER and
it should disable them for action equal to BUS_NOTIFY_UNBOUND_DRIVER
(instead of BUS_NOTIFY_ADD_DEVICE and BUS_NOTIFY_DEL_DEVICE,
respectively). Make this function behave as appropriate.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
Alan Stern [Sat, 18 Jun 2011 20:42:09 +0000 (22:42 +0200)]
PM: Fix async resume following suspend failure
The PM core doesn't handle suspend failures correctly when it comes to
asynchronously suspended devices. These devices are moved onto the
dpm_suspended_list as soon as the corresponding async thread is
started up, and they remain on the list even if they fail to suspend
or the sleep transition is cancelled before they get suspended. As a
result, when the PM core unwinds the transition, it tries to resume
the devices even though they were never suspended.
This patch (as1474) fixes the problem by adding a new "is_suspended"
flag to dev_pm_info. Devices are resumed only if the flag is set.
[rjw:
* Moved the dev->power.is_suspended check into device_resume(),
because we need to complete dev->power.completion and clear
dev->power.is_prepared too for devices whose
dev->power.is_suspended flags are unset.
* Fixed __device_suspend() to avoid setting dev->power.is_suspended
if async_error is different from zero.]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
Michal Kubecek [Sat, 18 Jun 2011 18:34:01 +0000 (20:34 +0200)]
PM: Free memory bitmaps if opening /dev/snapshot fails
When opening /dev/snapshot device, snapshot_open() creates memory
bitmaps which are freed in snapshot_release(). But if any of the
callbacks called by pm_notifier_call_chain() returns NOTIFY_BAD, open()
fails, snapshot_release() is never called and bitmaps are not freed.
Next attempt to open /dev/snapshot then triggers BUG_ON() check in
create_basic_memory_bitmaps(). This happens e.g. when vmwatchdog module
is active on s390x.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
Alan Stern [Sat, 18 Jun 2011 18:22:23 +0000 (20:22 +0200)]
PM: Rename dev_pm_info.in_suspend to is_prepared
This patch (as1473) renames the "in_suspend" field in struct
dev_pm_info to "is_prepared", in preparation for an upcoming change.
The new name is more descriptive of what the field really means.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
The part of Documentation/power/devices.txt regarding sysdevs is not
valid any more after commit 2e711c04dbbf7a7732a3f7073b1fc285d12b369d
(PM: Remove sysdev suspend, resume and shutdown operations), so
remove it.
Kevin Hilman [Fri, 10 Jun 2011 23:05:51 +0000 (16:05 -0700)]
PM / Runtime: Update doc: usage count no longer incremented across system PM
Commit e8665002477f0278f84f898145b1f141ba26ee26 (PM: Allow
pm_runtime_suspend() to succeed during system suspend) removed usage
count increment across system PM.
Update doc to reflect this.
Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Eric Anholt [Tue, 14 Jun 2011 23:43:09 +0000 (16:43 -0700)]
Revert "drm/i915: Kill GTT mappings when moving from GTT domain"
This reverts commit 4a684a4117abd756291969336af454e8a958802f.
Userland has always been required to set the object's domain to GTT
before using it through a GTT mapping, it's not something that the
kernel is supposed to enforce. (The pagefault support is so that we
can handle multiple mappings without userland having to pin across
them, not so that userland can use GTT after GPU domains without
telling the kernel).
Fixes 19.2% +/- 0.8% (n=6) performance regression in cairo-gl
firefox-talos-gfx on my T420 latop.
Reported-and-tested-by: nkalkhof@web.de
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38529 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
Linus Torvalds [Tue, 21 Jun 2011 17:36:06 +0000 (10:36 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/qib: Ensure that LOS and DFE are being turned off
RDMA/cxgb4: Couple of abort fixes
RDMA/cxgb4: Don't truncate MR lengths
RDMA/cxgb4: Don't exceed hw IQ depth limit for user CQs
Linus Torvalds [Tue, 21 Jun 2011 17:22:35 +0000 (10:22 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: Fix oops in jbd2_journal_remove_journal_head()
jbd2: Remove obsolete parameters in the comments for some jbd2 functions
ext4: fixed tracepoints cleanup
ext4: use FIEMAP_EXTENT_LAST flag for last extent in fiemap
ext4: Fix max file size and logical block counting of extent format file
ext4: correct comments for ext4_free_blocks()
Trond Myklebust [Fri, 10 Jun 2011 17:30:22 +0000 (13:30 -0400)]
NFSv4.1: Fix some issues with pnfs_generic_pg_test
1. If the intention is to coalesce requests 'prev' and 'req' then we
have to ensure at least that we have a layout starting at
req_offset(prev).
2. If we're only requesting a minimal layout of length desc->pg_count,
we need to test the length actually returned by the server before
we allow the coalescing to occur.
3. We need to deal correctly with (pgio->lseg == NULL)
4. Fixup the test guarding the pnfs_update_layout.