Hans Verkuil [Mon, 25 Aug 2014 11:02:14 +0000 (08:02 -0300)]
[media] vivid: add the Test Pattern Generator
The test patterns for video capture are generated by this code. All patterns
are precalculated taking into account colorspace information, pixel and video
aspect ratios and scaling information.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Mon, 25 Aug 2014 11:00:20 +0000 (08:00 -0300)]
[media] vivid: add the kthread code that controls the video rate
Add the kthread handlers for video/vbi capture and video/vbi output.
These carefully control the rate at which frames are generated (video
capture) and accepted (video output). While the short-term jitter is
around the order of a jiffie, in the long term the rate matches the
configured framerate exactly.
The capture thread handler also takes care of the video looping and
of capture and overlay support. This is probably the most complex part
of this driver due to the many combinations of crop, compose and scaling
on the input and output, and the blending that has to be done if
overlay support is enabled as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Mon, 25 Aug 2014 10:56:49 +0000 (07:56 -0300)]
[media] vivid: add VBI capture and output code
This adds support for VBI capture (raw and sliced) and VBI output
(raw and sliced) to the vivid driver. In addition a VBI generator
is added that generates simple VBI data in either sliced or raw
format.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 25 Jul 2014 09:08:36 +0000 (06:08 -0300)]
[media] vb2: fix multiplanar read() with non-zero data_offset
If this is a multiplanar buf_type and the plane we want to read has a
non-zero data_offset, then that data_offset was not taken into account.
Note that read() or write() for formats with more than one plane is currently
not allowed, hence the use of 'planes[0]' since this is only relevant for a
single-plane format.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Thu, 21 Aug 2014 17:02:27 +0000 (14:02 -0300)]
[media] m88ts2022: fix 32bit overflow on filter calc
Maximum satellite symbol rate used is 45000000Sps which overflows
when multiplied by 135. As final calculation result is fraction,
we could use mult_frac macro in order to keep calculation inside
32 bit number limits and prevent overflow.
Original bug and fix was provided by Nibble Max. I decided to
implement it differently as it is now.
Reported-by: Nibble Max <nibble.max@gmail.com> Tested-by: Nibble Max <nibble.max@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olli Salonen [Fri, 8 Aug 2014 07:06:37 +0000 (04:06 -0300)]
[media] cxusb: Add support for TechnoTrend TT-connect CT2-4650 CI
TechnoTrend TT-connect CT2-4650 CI (0b48:3012) is an USB DVB-T2/C tuner with
the following components:
USB interface: Cypress CY7C68013A-56LTXC
Demodulator: Silicon Labs Si2168-A20
Tuner: Silicon Labs Si2158-A20
CI chip: CIMaX SP2HF
The firmware for the tuner is the same as for TechnoTrend TT-TVStick CT2-4400.
See https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html
The demodulator needs a firmware that can be extracted from the Windows drivers.
File ttConnect4650_64.sys should be extracted from
http://www.tt-downloads.de/bda-treiber_4.1.0.4.zip (MD5 sum below).
Then the firmware can be extracted:
dd if=ttConnect4650_64.sys ibs=1 skip=273376 count=6424 of=dvb-demod-si2168-a20-01.fw
The SP2 CI module requires a definition of a function cxusb_tt_ct2_4650_ci_ctrl
that is passed on to the SP2 driver and called back for CAM operations.
[crope@iki.fi: meld USB ID define patch to this] Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olli Salonen [Fri, 8 Aug 2014 07:06:35 +0000 (04:06 -0300)]
[media] sp2: Add I2C driver for CIMaX SP2 common interface module
Driver for the CIMaX SP2 common interface chip. It is very much based on
the existing cimax2 driver for cx23885, but should be more reusable. The
product has been sold with name Atmel T90FJR as well and the data sheets
for that chip seem to be publicly available.
It seems that the USB device that I have and the cx23885 based devices will
need to interact differently with the chip for the CAM operations. Thus
there is one callback function that is passed on to the sp2 driver
(see function sp2_ci_op_cam for that one).
IRQ functionality is not included currently (not needed by USB devices
and I don't have a PCIe device for development).
Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olli Salonen [Mon, 11 Aug 2014 19:58:10 +0000 (16:58 -0300)]
[media] si2168: add ts_mode setting and move to si2168_init
Luis Alves submitted a TS mode patch to si2168 earlier, but the
patch was rejected due to a small issue. Here is a working version.
Also, setting of TS mode is moved from si2168_set_frontend to
si2168_init.
This patch adds the TS mode as a config option for the si2168 demod:
- ts_mode added to config struct.
- Possible (interesting) values are
* Parallel mode = 0x06
* Serial mode = 0x03
Currently the modules using this demod only use parallel mode.
Patches for these modules later in this patch series.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olli Salonen [Tue, 5 Aug 2014 12:03:54 +0000 (09:03 -0300)]
[media] si2157: clean logging
Same thing for si2157 as Antti did earlier for tda18212:
There is no need to print module name nor function name as those
are done by kernel logging system when dev_xxx logging is used and
driver is proper I2C driver.
While here, fix a typo ("unknown") in si2157_init.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olli Salonen [Tue, 5 Aug 2014 11:54:08 +0000 (08:54 -0300)]
[media] si2168: clean logging
Same thing for si2168 as Antti did earlier for tda18212:
There is no need to print module name nor function name as those
are done by kernel logging system when dev_xxx logging is used and
driver is proper I2C driver.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Changbing Xiong [Thu, 21 Aug 2014 02:05:07 +0000 (23:05 -0300)]
[media] media: correct return value in dvb_demux_poll
Data type of return value is unsigned int, but in function of dvb_demux_poll,
when the pointer of dmxdevfilter equals NULL, it will return -EINVAL, which
is invalid.
Changbing Xiong [Thu, 21 Aug 2014 02:04:25 +0000 (23:04 -0300)]
[media] media: fix kernel deadlock due to tuner pull-out while playing
Normally, ADAP_STREAMING bit is set in dvb_usb_start_feed and cleared in
dvb_usb_stop_feed.
But in exceptional cases, for example, when the tv is playing programs
and the tuner is pulled out, then dvb_usbv2_disconnect is called.
In such case, it will first call dvb_usbv2_adapter_frontend_exit to stop
dvb_frontend_thread, and then call dvb_usbv2_adapter_dvb_exit to clear
ADAP_STREAMING bit.
At this point, if dvb_frontend_thread is sleeping and waiting for
ADAP_STREAMING to be cleared to get out of sleep. then
dvb_frontend_thread can never be stoped, because clearing ADAP_STREAMING
bit is performed after dvb_frontend_thread is stopped (i.e. performed in
dvb_usbv2_adapter_dvb_exit).
So, deadlock:
[ 240.822037] INFO: task khubd:497 blocked for more than 120 seconds.
[ 240.822655] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.830493] khubd D c0013b3c 0 497 2 0x00000000
[ 240.836996] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c00110f4>] (schedule_timeout+0x14c/0x19c)
[ 240.845940] [<c00110f4>] (schedule_timeout+0x14c/0x19c) from [<c00137f4>] (wait_for_common+0xac/0x150)
[ 240.855234] [<c00137f4>] (wait_for_common+0xac/0x150) from [<c004989c>] (kthread_stop+0x58/0x90)
[ 240.864004] [<c004989c>] (kthread_stop+0x58/0x90) from [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c)
[ 240.872849] [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c) from [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8)
[ 240.882666] [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8) from [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc)
[ 240.892204] [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc) from [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70)
[ 240.901499] [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70) from [<c031c050>] (usb_unbind_interface+0x58/0x188)
[ 240.911395] [<c031c050>] (usb_unbind_interface+0x58/0x188) from [<c02c3e78>] (__device_release_driver+0x74/0xd0)
[ 240.921544] [<c02c3e78>] (__device_release_driver+0x74/0xd0) from [<c02c3ef0>] (device_release_driver+0x1c/0x28)
[ 240.931697] [<c02c3ef0>] (device_release_driver+0x1c/0x28) from [<c02c39b8>] (bus_remove_device+0xc4/0xe4)
[ 240.941332] [<c02c39b8>] (bus_remove_device+0xc4/0xe4) from [<c02c1344>] (device_del+0xf4/0x178)
[ 240.950106] [<c02c1344>] (device_del+0xf4/0x178) from [<c0319eb0>] (usb_disable_device+0xa0/0x1c8)
[ 240.959040] [<c0319eb0>] (usb_disable_device+0xa0/0x1c8) from [<c03128b4>] (usb_disconnect+0x88/0x188)
[ 240.968326] [<c03128b4>] (usb_disconnect+0x88/0x188) from [<c0313edc>] (hub_thread+0x4d0/0x1200)
[ 240.977100] [<c0313edc>] (hub_thread+0x4d0/0x1200) from [<c0049690>] (kthread+0xa4/0xb0)
[ 240.985174] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c)
[ 240.993259] INFO: task kdvb-ad-0-fe-0:3256 blocked for more than 120 seconds.
[ 241.000349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 241.008162] kdvb-ad-0-fe-0 D c0013b3c 0 3256 2 0x00000000
[ 241.014507] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c03eda44>] (wait_schedule+0x8/0x10)
[ 241.022924] [<c03eda44>] (wait_schedule+0x8/0x10) from [<c001120c>] (__wait_on_bit+0x74/0xb8)
[ 241.031434] [<c001120c>] (__wait_on_bit+0x74/0xb8) from [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70)
[ 241.040902] [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70) from [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc)
[ 241.050618] [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc) from [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8)
[ 241.060164] [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8) from [<c0049690>] (kthread+0xa4/0xb0)
[ 241.068929] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c)
Fix it by calling dvb_usbv2_adapter_frontend_exit() latter.
Test enviroment: odroidx2 + Hauppauge(WinTV-Aero-M)
There are several arch-specific media drivers that don't
require asm-specific includes and can be successfully
compiled on x86. Add COMPILE_TEST dependency for them, in
order to allow a broader test on those drivers.
That helps static analysis tools like Coverity to discover
eventual troubles there.
That helps some static checks, so enable it. While there, it was
noticed that linux/sizes.h was missing:
drivers/media/platform/exynos4-is/mipi-csis.c: In function ‘s5pcsis_s_rx_buffer’:
drivers/media/platform/exynos4-is/mipi-csis.c:114:31: error: ‘SZ_4K’ undeclared (first use in this function)
#define S5PCSIS_PKTDATA_SIZE SZ_4K
^
Allowing COMPILE_TEST here is trivial, but there's one missing
header to be added:
drivers/media/platform/ti-vpe/vpe.c: In function ‘vpe_probe’:
drivers/media/platform/ti-vpe/vpe.c:2266:56: error: ‘SZ_32K’ undeclared (first use in this function)
dev->base = devm_ioremap(&pdev->dev, dev->res->start, SZ_32K);
^
drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c: In function 's5p_jpeg_clear_int':
drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:327:16: warning: variable 'reg' set but not used [-Wunused-but-set-variable]
unsigned long reg;
^
drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming':
drivers/media/platform/soc_camera/atmel-isi.c:387:6: warning: variable 'sr' set but not used [-Wunused-but-set-variable]
u32 sr = 0;
^
drivers/media/platform/soc_camera/mx2_camera.c: In function 'mx27_camera_emma_prp_reset':
drivers/media/platform/soc_camera/mx2_camera.c:812:6: warning: variable 'cntl' set but not used [-Wunused-but-set-variable]
u32 cntl;
^
[media] exynos4-is/media-dev: get rid of a warning for a dead code
drivers/media/platform/exynos4-is/media-dev.c: In function 'fimc_md_link_notify':
drivers/media/platform/exynos4-is/media-dev.c:1102:4: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
; /* TODO: Link state change validation */
^
drivers/media/platform/exynos4-is/mipi-csis.c: In function 's5pcsis_parse_dt':
drivers/media/platform/exynos4-is/mipi-csis.c:756:2: warning: comparison is always false due to limited range of data type [-Wtype-limits]
if (state->index < 0 || state->index >= CSIS_MAX_ENTITIES)
^
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:826:5: warning: no previous prototype for 'vidioc_decoder_cmd' [-Wmissing-prototypes]
int vidioc_decoder_cmd(struct file *file, void *priv,
^
drivers/media/platform/s5p-mfc/s5p_mfc.c: In function 's5p_mfc_runtime_resume':
drivers/media/platform/s5p-mfc/s5p_mfc.c:1314:6: warning: variable 'pre_power' set but not used [-Wunused-but-set-variable]
int pre_power;
^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c:163:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v5' [-Wmissing-prototypes]
struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v5(void)
^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c:156:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v6' [-Wmissing-prototypes]
struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v6(void)
^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c: In function 's5p_mfc_run_dec_frame':
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:1189:15: warning: variable 'index' set but not used [-Wunused-but-set-variable]
unsigned int index;
^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'cleanup_ref_queue':
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:27: warning: variable 'mb_c_addr' set but not used [-Wunused-but-set-variable]
unsigned long mb_y_addr, mb_c_addr;
^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:16: warning: variable 'mb_y_addr' set but not used [-Wunused-but-set-variable]
unsigned long mb_y_addr, mb_c_addr;
^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: At top level:
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1684:5: warning: no previous prototype for 'vidioc_encoder_cmd' [-Wmissing-prototypes]
int vidioc_encoder_cmd(struct file *file, void *priv,
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:119:5: warning: no previous prototype for 's5p_mfc_release_firmware' [-Wmissing-prototypes]
int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:132:5: warning: no previous prototype for 's5p_mfc_reset' [-Wmissing-prototypes]
int s5p_mfc_reset(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:214:5: warning: no previous prototype for 's5p_mfc_init_hw' [-Wmissing-prototypes]
int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:291:6: warning: no previous prototype for 's5p_mfc_deinit_hw' [-Wmissing-prototypes]
void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:301:5: warning: no previous prototype for 's5p_mfc_sleep' [-Wmissing-prototypes]
int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:330:5: warning: no previous prototype for 's5p_mfc_wakeup' [-Wmissing-prototypes]
int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:378:5: warning: no previous prototype for 's5p_mfc_open_mfc_inst' [-Wmissing-prototypes]
int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:420:6: warning: no previous prototype for 's5p_mfc_close_mfc_inst' [-Wmissing-prototypes]
void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
^
In file included from drivers/media/platform/exynos4-is/fimc-is-param.c:31:0:
drivers/media/platform/exynos4-is/fimc-is-errno.h:245:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
const char * const fimc_is_strerr(unsigned int error);
^
drivers/media/platform/exynos4-is/fimc-is-errno.h:246:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
const char * const fimc_is_param_strerr(unsigned int error);
^
drivers/media/platform/exynos4-is/fimc-is-param.c: In function 'fimc_is_set_initial_params':
drivers/media/platform/exynos4-is/fimc-is-param.c:670:23: warning: variable 'sensor' set but not used [-Wunused-but-set-variable]
struct sensor_param *sensor;
^
drivers/media/platform/s5p-g2d/g2d.c: In function 'job_abort':
drivers/media/platform/s5p-g2d/g2d.c:493:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
The job_abort function returns void. No sense to get the
returned argument, if this won't be used.
drivers/media/platform/s5p-jpeg/jpeg-core.c:732:6: warning: no previous prototype for 'exynos4_jpeg_set_huff_tbl' [-Wmissing-prototypes]
void exynos4_jpeg_set_huff_tbl(void __iomem *base)
^
And don't compile this dead code, while not needed:
drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:236:14: warning: no previous prototype for 'exynos3250_jpeg_get_y' [-Wmissing-prototypes]
unsigned int exynos3250_jpeg_get_y(void __iomem *regs)
^
drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:241:14: warning: no previous prototype for 'exynos3250_jpeg_get_x' [-Wmissing-prototypes]
unsigned int exynos3250_jpeg_get_x(void __iomem *regs)
^
drivers/media/platform/omap/omap_vout.c: In function 'omapvid_setup_overlay':
drivers/media/platform/omap/omap_vout.c:372:29: warning: variable 'pixheight' set but not used [-Wunused-but-set-variable]
int cropheight, cropwidth, pixheight, pixwidth;
^
drivers/media/platform/omap/omap_vout.c: In function 'vidioc_s_ctrl':
drivers/media/platform/omap/omap_vout.c:1454:24: warning: variable 'ovl' set but not used [-Wunused-but-set-variable]
struct omap_overlay *ovl;
^
drivers/media/platform/omap/omap_vout.c: In function 'vidioc_reqbufs':
drivers/media/platform/omap/omap_vout.c:1492:55: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0))
^
[media] omap: fix compilation if !VIDEO_OMAP2_VOUT_VRFB
When CONFIG_VIDEO_OMAP2_VOUT_VRFB is disabled, the compilation
will fail, as the function stubs are wrong. Also, as they weren't
declared as static inline, lots of warnings will be generated.
[media] dvb_frontend: estimate bandwidth also for DVB-S/S2/Turbo
The needed bandwidth can be estimated using the symbol rate and
the rolloff factor. This could be useful for the frontend drivers,
as they don't need to calculate it themselves.
Reported-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] s5p_mfc: don't use an external symbol called 'debug'
The 'debug' name is known to cause conflicts with allyesconfig
on several archs. So, localize its name.
>> drivers/built-in.o:(.bss+0xc7ee2c): multiple definition of `debug'
arch/x86/built-in.o:(.entry.text+0xf78): first defined here
ld: Warning: size of symbol `debug' changed from 86 in arch/x86/built-in.o to 4 in drivers/built-in.o
While here, fix a wrong file name reference
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming':
drivers/media/platform/soc_camera/atmel-isi.c:397:26: warning: large integer implicitly truncated to unsigned type [-Woverflow]
isi_writel(isi, ISI_INTDIS, ~0UL);
^
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of using u32 for DMA address, use the proper
Kernel type for it.
drivers/media/platform/soc_camera/atmel-isi.c: In function 'atmel_isi_probe':
>> drivers/media/platform/soc_camera/atmel-isi.c:981:26: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type
isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
^
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/ti-vpe/vpdma.c: In function 'vpdma_alloc_desc_buf':
>> drivers/media/platform/ti-vpe/vpdma.c:332:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
WARN_ON((u32) buf->addr & VPDMA_DESC_ALIGN);
^
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/ti-vpe/vpdma.c: In function 'dump_dtd':
include/linux/dynamic_debug.h:64:16: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
static struct _ddebug __aligned(8) \
^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA'
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
^
include/linux/printk.h:263:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^
>> drivers/media/platform/ti-vpe/vpdma.c:587:2: note: in expansion of macro 'pr_debug'
pr_debug("word2: start_addr = 0x%08x\n", dtd->start_addr);
^
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/exynos-gsc/gsc-m2m.c: In function 'gsc_m2m_reqbufs':
drivers/media/platform/exynos-gsc/gsc-m2m.c:365:20: warning: variable 'frame' s
et but not used [-Wunused-but-set-variable]
struct gsc_frame *frame;
^
drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_probe':
drivers/media/platform/exynos-gsc/gsc-core.c:1089:2: warning: comparison is alw
ays false due to limited range of data type [-Wtype-limits]
if (gsc->id < 0 || gsc->id >= drv_data->num_entities) {
^
gsc->id is declared as u16, so it should always be a positive
value.
drivers/media/platform/davinci/dm355_ccdc.c:463:5: warning: no previous prototy
pe for 'ccdc_write_dfc_entry' [-Wmissing-prototypes]
int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
^
drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_channel_isr':
drivers/media/platform/davinci/vpif_capture.c:376:18: warning: variable 'field'
set but not used [-Wunused-but-set-variable]
enum v4l2_field field;
^
drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_calculate_offs
ets':
drivers/media/platform/davinci/vpif_capture.c:536:23: warning: variable 'vpitch
' set but not used [-Wunused-but-set-variable]
unsigned int hpitch, vpitch, sizeimage;
^
drivers/media/platform/davinci/vpif_display.c: In function 'vpif_channel_isr':
drivers/media/platform/davinci/vpif_display.c:363:18: warning: variable 'field'
set but not used [-Wunused-but-set-variable]
enum v4l2_field field;
^
drivers/media/platform/davinci/vpif_display.c: In function 'vpif_calculate_offs
ets':
drivers/media/platform/davinci/vpif_display.c:505:23: warning: variable 'vpitch
' set but not used [-Wunused-but-set-variable]
unsigned int hpitch, vpitch, sizeimage;
^
drivers/media/platform/davinci/vpif_display.c: In function 'vpif_set_output':
drivers/media/platform/davinci/vpif_display.c:816:27: warning: variable 'subdev
_info' set but not used [-Wunused-but-set-variable]
struct vpif_subdev_info *subdev_info = NULL;
Randy Dunlap [Sat, 16 Aug 2014 00:15:53 +0000 (21:15 -0300)]
[media] media: ttpci: fix av7110 build to be compatible with CONFIG_INPUT_EVDEV
Fix build when CONFIG_INPUT_EVDEV=m and DVB_AV7110=y.
Only build av7110_ir.c when CONFIG_INPUT_EVDEV is compatible with
CONFIG_DVB_AV7110.
Fixes these build errors:
drivers/built-in.o: In function `input_sync':
av7110_ir.c:(.text+0x1223ac): undefined reference to `input_event'
drivers/built-in.o: In function `av7110_emit_key':
av7110_ir.c:(.text+0x12247c): undefined reference to `input_event'
av7110_ir.c:(.text+0x122495): undefined reference to `input_event'
av7110_ir.c:(.text+0x122569): undefined reference to `input_event'
av7110_ir.c:(.text+0x1225a7): undefined reference to `input_event'
drivers/built-in.o:av7110_ir.c:(.text+0x122629): more undefined
references to `input_event' follow
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x1227e4): undefined reference to `input_allocate_device'
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x12298f): undefined reference to `input_register_device'
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x12299e): undefined reference to `input_free_device'
drivers/built-in.o: In function `av7110_ir_exit':
(.text+0x122a94): undefined reference to `input_unregister_device'
drivers/built-in.o: In function `av7110_detach':
av7110.c:(.text+0x228d4a): undefined reference to `av7110_ir_exit'
drivers/built-in.o: In function `arm_thread':
av7110.c:(.text+0x22a404): undefined reference to `av7110_check_ir_config'
av7110.c:(.text+0x22a626): undefined reference to `av7110_check_ir_config'
drivers/built-in.o: In function `av7110_attach':
av7110.c:(.text+0x22b08c): undefined reference to `av7110_ir_init'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Jim Davis <jim.epost@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Now that alsa code is part of the driver, it can be compiled
only if alsa is enabled.
drivers/built-in.o: In function `snd_usbtv_hw_free':
>> usbtv-audio.c:(.text+0x21eb55): undefined reference to `snd_pcm_lib_free_pages'
drivers/built-in.o: In function `snd_usbtv_hw_params':
>> usbtv-audio.c:(.text+0x21eb72): undefined reference to `snd_pcm_lib_malloc_pages'
drivers/built-in.o: In function `usbtv_audio_urb_received':
>> usbtv-audio.c:(.text+0x21ed66): undefined reference to `snd_pcm_link_rwlock'
>> usbtv-audio.c:(.text+0x21ed9f): undefined reference to `snd_pcm_link_rwlock'
>> usbtv-audio.c:(.text+0x21edf5): undefined reference to `snd_pcm_period_elapsed'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f00a): undefined reference to `snd_card_new'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f0a2): undefined reference to `snd_pcm_new'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f0e5): undefined reference to `snd_pcm_set_ops'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f103): undefined reference to `snd_pcm_lib_preallocate_pages_for_all'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f10c): undefined reference to `snd_card_register'
drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f12a): undefined reference to `snd_card_free'
drivers/built-in.o: In function `usbtv_audio_free':
>> (.text+0x21f15c): undefined reference to `snd_card_free'
>> drivers/built-in.o:(.data+0x43250): undefined reference to `snd_pcm_lib_ioctl'
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Shuah Khan [Wed, 13 Aug 2014 18:52:39 +0000 (15:52 -0300)]
[media] media: fix au0828 dvb suspend/resume to call dvb_frontend_suspend/resume
au0828 doesn't resume correctly and TV tuning fails with
xc_set_signal_source(0) failed message. Change au0828 dvb
suspend and resume interfaces to suspend and resume frontend
during suspend and resume respectively. dvb_frontend_suspend()
suspends tuner and fe using tuner and fe ops. dvb_frontend_resume()
resumes fe and tuner using fe and tuner ops ini before waking up
the frontend. With this change HVR950Q suspend and resume work
when system gets suspended when digital function is tuned to a
channel and with active TV stream, and after resume it went right
back to active TV stream.
Frank Schaefer [Sat, 9 Aug 2014 09:37:20 +0000 (06:37 -0300)]
[media] em28xx-v4l: give back all active video buffers to the vb2 core properly on streaming stop
When a new video frame is started, the driver takes the next video buffer from
the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf
for further processing.
On streaming stop we currently only give back the pending buffers from the list
but not the ones which are currently processed.
This causes the following warning from the vb2 core since kernel 3.15:
Axel Lin [Fri, 8 Aug 2014 13:32:56 +0000 (10:32 -0300)]
[media] tda7432: Fix setting TDA7432_MUTE bit for TDA7432_RF register
Fix a copy-paste bug when converting to the control framework.
Fixes: commit 5d478e0de871 ("[media] tda7432: convert to the control framework") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 8 Aug 2014 12:59:02 +0000 (09:59 -0300)]
[media] vb2: use pr_info instead of pr_debug
Modern kernels enable dynamic printk support, which is fine, except when it is
combined with a debug module option. Enabling debug in videobuf2-core now produces
no debugging unless it is also enabled through the dynamic printk support in debugfs.
Either use a debug module option + pr_info, or use pr_debug without a debug module
option. In this case the fact that you can set various debug levels is very useful,
so I believe that for videobuf2-core.c we should use pr_info.
The mix of the two is very confusing: I've spent too much time already trying to
figure out why I am not seeing any debug output in the kernel log when I do:
The reason is that vb2_fop_mmap and vb2_fop_get_unmapped_area take the core lock
while they are called with the mmap_sem semaphore held. But elsewhere in the code
the core lock is taken first but calls to copy_to/from_user() can take the mmap_sem
semaphore as well, potentially causing a classical A-B/B-A deadlock.
However, the mmap/get_unmapped_area calls really shouldn't take the core lock
at all. So what would happen if they don't take the core lock anymore?
There are two situations that need to be taken into account: calling mmap while
new buffers are being added and calling mmap while buffers are being deleted.
The first case works almost fine without a lock: in all cases mmap relies on
correctly filled-in q->num_buffers/q->num_planes values and those are only
updated by reqbufs and create_buffers *after* any new buffers have been
initialized completely. Except in one case: if an error occurred while allocating
the buffers it will increase num_buffers and rely on __vb2_queue_free to
decrease it again. So there is a short period where the buffer information
may be wrong.
The second case definitely does pose a problem: buffers may be in the process
of being deleted, without the internal structure being updated.
In order to fix this a new mutex is added to vb2_queue that is taken when
buffers are allocated or deleted, and in vb2_mmap. That way vb2_mmap won't
get stale buffer data. Note that this is a problem only for MEMORY_MMAP, so
even though __qbuf_userptr and __qbuf_dmabuf also mess around with buffers
(mem_priv in particular), this doesn't clash with vb2_mmap or
vb2_get_unmapped_area since those are MMAP specific.
As an additional bonus the hack in __buf_prepare, the USERPTR case, can be
removed as well since mmap() no longer takes the core lock.
All in all a much cleaner solution.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Dan Carpenter [Tue, 5 Aug 2014 08:11:13 +0000 (05:11 -0300)]
[media] vmalloc_sg: off by one in error handling
The "i--" needs to happen at the start of the loop or it will try to
release something bogus (probably it will crash) and it won't release
the first ->vaddr_page[].
Fixes: 7b4eeed174b7 ('[media] vmalloc_sg: make sure all pages in vmalloc area are really DMA-ready') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>