Ville Syrjälä [Mon, 2 Feb 2015 17:13:57 +0000 (19:13 +0200)]
drm/modes: Print the mode status in human readable form
Currently when a mode is rejected the reason is printed as a raw number.
Having to manually decode that to a enum drm_mode_status value is
tiresome. Have the code do the decoding instead and print the result
in a human readable format.
Just having an array of strings indexed with the mode status doesn't
work since the enum includes negative values. So we offset the status
by +3 which makes all the indexes non-negative. Also add a bit of
paranoia into the code to catch out of bounds accesses in case
someone adds more enum values but forgets to update the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Chen Gang S [Sun, 1 Feb 2015 14:08:33 +0000 (22:08 +0800)]
drm: Kconfig: Let all DRM_GEM_CMA_HELPER related macros depend on HAVE_DMA_ATTRS
DRM_GEM_CMA_HELPER is depend on HAVE_DMA_ATTRS, or it will break the
building. The related error (with allmodconfig under xtensa):
CC [M] drivers/gpu/drm/drm_gem_cma_helper.o
drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_create':
drivers/gpu/drm/drm_gem_cma_helper.c:110:19: error: implicit declaration of function 'dma_alloc_writecombine' [-Werror=implicit-function-declaration]
cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size,
^
drivers/gpu/drm/drm_gem_cma_helper.c:110:17: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
cma_obj->vaddr = dma_alloc_writecombine(drm->dev, size,
^
drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_free_object':
drivers/gpu/drm/drm_gem_cma_helper.c:193:3: error: implicit declaration of function 'dma_free_writecombine' [-Werror=implicit-function-declaration]
dma_free_writecombine(gem_obj->dev->dev, cma_obj->base.size,
^
drivers/gpu/drm/drm_gem_cma_helper.c: In function 'drm_gem_cma_mmap_obj':
drivers/gpu/drm/drm_gem_cma_helper.c:330:8: error: implicit declaration of function 'dma_mmap_writecombine' [-Werror=implicit-function-declaration]
ret = dma_mmap_writecombine(cma_obj->base.dev->dev, vma,
^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 2 Feb 2015 00:53:23 +0000 (10:53 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
Rebase of main pull for 3.20. There was a mid-air collision between
the bridge changes and msm eDP support. And atomic dpms support broke
msm somewhat, due to using prepare/commit hooks in a different way.
Compared to the initial pull req, this fixes up a memory leak caused
by the bridge changes, rebases the eDP support on the bridge changes,
and migrates to the atomic dpms hooks to fix the dpms breakage.
Highlights (from original pull req):
1) YUV support for mdp4 and mdp5
2) eDP support
3) hw cursor support for mdp5[*]
4) additional hdmi support for apq8084 (snapdragon 805)
5) few bug fixes
Note that I may have a later pull to enable hdmi hpd irqs.. but
(un)fortunately I seem to have a particularly troublesome monitor.. I
managed to figure out a workaround for spurious hpd disconnect irqs
that works with some of my boards but not others, so holding off on
that patch for now. There are also patches for HDCP support, but
those are waiting on some scm patches outside of drm so I think
waiting until 3.21 at this point.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (22 commits)
drm/msm: add moduleparam to disable fbdev
drm/msm: fix build error with W=1
drm/msm/mdp5: Fix negative SMP block allocation
drm/msm/hdmi: disallow interlaced
drm/msm/atomic: fix issue with gnome-shell wayland
drm/msm/mdp5: Add hardware cursor support
drm/msm/hdmi: rework hdmi configurations, using dt_match[]
drm/msm/hdmi: Add HDMI platform config for apq8084
drm/msm/hdmi: use dynamic allocation for hdmi resources
drm/msm/mdp5: fix parameter type for mdp5_ctl_set_intf()
drm/msm/dp: use link power helpers
drm/msm: Add the eDP connector in msm drm driver (V2)
drm/msm: Initial add eDP support in msm drm driver (v5)
drm/msm/mdp4: add YUV format support
drm/msm/mdp5: add NV12 support for MDP5
drm/msm/mdp: add common YUV information for MDP4/MDP5
drm/msm: update generated headers
drm/msm: Do not BUG_ON(!spin_is_locked()) on UP
drm/msm/hdmi: fix memory leak after bridge changes
drm/msm: fix fallout of atomic dpms changes
...
Rob Clark [Tue, 20 Jan 2015 18:04:12 +0000 (13:04 -0500)]
drm/msm: fix build error with W=1
Combining -Werror with all the extra warning flags that W=1 adds doesn't
go so well. Especially because some of the warnings triggered are from
included headers. So just drop -Werror.
Stephane Viau [Fri, 16 Jan 2015 18:22:14 +0000 (13:22 -0500)]
drm/msm/mdp5: Fix negative SMP block allocation
In case we request a number of SMP blocks which is lower than
the already reserved blocks, we should not try to allocate a
negative number, but 0 blocks instead.
Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 14 Jan 2015 16:16:32 +0000 (11:16 -0500)]
drm/msm/hdmi: disallow interlaced
So after clarification from qcom, it seems mdp4 and mdp5 support
*de*interlacing but not generating an interlaced signal. Which would
explain why interlaced modes never worked properly.
So disable in the one connector which was claiming to support
interlaced.
Rob Clark [Mon, 12 Jan 2015 21:11:16 +0000 (16:11 -0500)]
drm/msm/atomic: fix issue with gnome-shell wayland
The gnome-shell wayland compositor triggers a setcrtc with an fb that is
still being rendered, triggering the call to _wait_fence_interruptable().
But a NULL timeout means "don't wait, return -EBUSY if not ready", which
in turn causes the setcrtc to fail.
Stephane Viau [Wed, 7 Jan 2015 21:27:26 +0000 (16:27 -0500)]
drm/msm/hdmi: Add HDMI platform config for apq8084
This change add the regulator/clock configuration for MDP5 v1.3.
This config is close to the one already existing for 8x74, except
that one more regulator is needed (hpd-5v-en).
Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 13 Jan 2015 19:33:40 +0000 (14:33 -0500)]
drm/msm/hdmi: use dynamic allocation for hdmi resources
Instead of reporting BUG_ON when resources arrays are not
dimensioned correctly, this patch does a dynamic allocation of
these arrays. This is needed for the following patches that add a
regulator for a new target.
Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Wed, 7 Jan 2015 23:47:44 +0000 (18:47 -0500)]
drm/msm: Initial add eDP support in msm drm driver (v5)
This change adds a new eDP connector in msm drm driver. With this
change, eDP panel can work with msm platform under drm framework.
v1: Initial change
v2: Address Rob's comments
Use generated header file for register definitions
Change to devm_* APIs
v3: Address Thierry's comments and rebase on top of atomic changes
Remove edp_bridge_mode_fixup
Remove backlight control code and rely on pwm-backlight
Remove continuous splash screen support for now
Change to gpiod_* APIs
v4: Fix kbuild test issue
Signed-off-by: Hai Li <hali@codeaurora.org>
[robclark: v5: rebase on drm_bridge changes in drm-next] Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Mon, 8 Dec 2014 15:48:57 +0000 (10:48 -0500)]
drm/msm/mdp: add common YUV information for MDP4/MDP5
Both MDP4 and MDP5 share some code as far as YUV support is
concerned. This change adds this information and will be followed
by the actual MDP4 and MDP5 YUV support patches.
Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 31 Jan 2015 16:45:09 +0000 (11:45 -0500)]
drm/msm/hdmi: fix memory leak after bridge changes
3d3f8b1f8b ("drm/bridge: make bridge registration independent of drm
flow") resulted that the hdmi bridge object would be leaked at teardown.
Just switch over to devm_kzalloc() as the easy way to solve this.
Rob Clark [Fri, 30 Jan 2015 22:04:45 +0000 (17:04 -0500)]
drm/msm: fix fallout of atomic dpms changes
As a result of atomic DPMS support, the various prepare/commit hooks get
called in a way that msm dislikes. We were expecting prepare/commit to
bracket a modeset, which is no longer the case. This was needed to hold
various extra clk's (such as interface clks) on while we are touching
registers, and in the case of mdp4 holding vblank enabled.
The most straightforward way to deal with this, since we already have
our own atomic_commit(), is to just handle prepare/commit internally to
the driver (with some additional vfuncs for mdp4 vs mdp5), and switch
everything over to instead use the new enable/disable hooks. It doesn't
really change too much, despite the code motion. What used to be in the
encoder/crtc dpms() fxns is split out into enable/disable.
We should be able to drop our own enable-state tracking, as the atomic
helpers should do this for us. But keeping that for the short term for
extra debugging as atomic stablizes.
Boris Brezillon [Fri, 23 Jan 2015 20:03:02 +0000 (21:03 +0100)]
drm: atmel-hlcdc: Add dependency on ARM
The atmel-hlcdc driver selects DRM_GEM_CMA_HELPER which makes use of
symbols only available when HAVE_DMA_ATTRS is selected.
Add a dependency on the ARM architecture which select this option.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
Arnd Bergmann [Wed, 28 Jan 2015 13:48:09 +0000 (14:48 +0100)]
drm: msm: add missing dependencies on OF and COMMON_CLK
The msm gpu drivers depend on both the DT mechanism and the
common clk handling code, if they are not enabled, we get
a number of build errors:
In file included from drivers/gpu/drm/msm/hdmi/hdmi.h:27:0,
from drivers/gpu/drm/msm/hdmi/hdmi_bridge.c:18:
drivers/gpu/drm/msm/msm_drv.h:45:24: fatal error: mach/board.h: No such file or directory
#include <mach/board.h>
^
drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c:503:2: error: implicit declaration of function 'devm_clk_register' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
Arnd Bergmann [Thu, 29 Jan 2015 16:16:38 +0000 (17:16 +0100)]
drm: shmobile: fix Kconfig dependencies
The shmobile drm driver selects BACKLIGHT_CLASS_DEVICE
as of 0a5a5499ad88 "drm: shmobile: Add dependency on
BACKLIGHT_CLASS_DEVICE", but that option in turn depends
on BACKLIGHT_LCD_SUPPORT, so we actually have to select
both, or alternatively use 'depends on BACKLIGHT_CLASS_DEVICE'.
Further, the driver uses FB_SH_MOBILE_MERAM if that is
enabled, but this breaks if MERAM is a module while
the DRM driver is built-in. To solve this, add a dependency
on "FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM", which forces
DRM_SHMOBILE to be a module if FB_SH_MOBILE_MERAM set to 'm'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
Arnd Bergmann [Wed, 28 Jan 2015 13:48:07 +0000 (14:48 +0100)]
drm: rockchip: add reset controller dependency
When the reset controller subsystem is disabled, this driver
fails to build:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c: In function 'vop_initial':
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1267:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration]
The easiest solution is to add a dependency in Kconfig to avoid
that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
Haixia Shi [Fri, 30 Jan 2015 18:51:14 +0000 (10:51 -0800)]
drm/udl: optimize udl_compress_hline16 (v2)
The run-length encoding algorithm should compare 16-bit encoded pixel
values instead of comparing raw pixel values. It allows pixels
with similar but different colors to be encoded as repeat pixels, and
thus potentially save USB bandwidth.
Signed-off-by: Haixia Shi <hshi@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Haixia Shi <hshi@chromium.org> Signed-off-by: Dave Airlie <airlied@gmail.com>
Dave Airlie [Thu, 29 Jan 2015 01:29:35 +0000 (11:29 +1000)]
Merge tag 'drm/panel/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v3.20-rc1
This contains the long-awaited drm_bridge series that makes Chromebooks
work for people. I had thought this would've been perfect by now, but
then I go and build test it and the first thing it does is yell about a
recursive dependency. I fixed that up because I was feeling bad for not
getting around to look at this earlier.
Biseds that there is new support for two more panels, a couple of fixup
patches to the Sharp LQ101R1SX01 dual-channel DSI panel driver and a
potential NULL pointer dereference fix.
* tag 'drm/panel/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (23 commits)
drm/bridge: dw-hdmi: Adapt to bridge API change
drm/sti: fixup for bridge interface
drm/bridge: dw-hdmi: Fix return error path
drm: Check the right variable when setting formats
Documentation: bridge: Add documentation for ps8622 DT properties
Documentation: devicetree: Add vendor prefix for parade
Documentation: drm: bridge: move to video/bridge
drm/bridge: ptn3460: use gpiod interface
drm/bridge: ptn3460: probe connector at the end of bridge attach
drm/bridge: ptn3460: support drm_panel
drm/exynos: dp: support drm_bridge
drm/bridge: ptn3460: Convert to I2C driver model
drm/bridge: make bridge registration independent of drm flow
drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init
drm/bridge: ptn3460: Few trivial cleanups
drm/panel: simple: Add AVIC TM070DDH03 panel support
of: Add vendor prefix for Shanghai AVIC Optoelectronics Co., Ltd.
drm/panel: sharp: lq101r1sx01: Remove unneeded include
drm/panel: sharp: lq101r1sx01: Respect power timings
drm/panel: sharp: lq101r1sx01: Add delay after display on
...
Fabio Estevam [Tue, 27 Jan 2015 12:21:49 +0000 (10:21 -0200)]
drm/bridge: dw-hdmi: Adapt to bridge API change
Commit fbc4572e9c48e45b ("drm/bridge: make bridge registration independent of
drm flow") introduced some drm/bridge API modifications. Make the necessary
changes so that we can avoid the build breakage:
drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_bridge_destroy':
drivers/gpu/drm/bridge/dw_hdmi.c:1378:2: error: implicit declaration of function 'drm_bridge_cleanup' [-Werror=implicit-function-declaration]
drivers/gpu/drm/bridge/dw_hdmi.c: At top level:
drivers/gpu/drm/bridge/dw_hdmi.c:1471:2: error: unknown field 'destroy' specified in initializer
drivers/gpu/drm/bridge/dw_hdmi.c: In function 'dw_hdmi_register':
drivers/gpu/drm/bridge/dw_hdmi.c:1535:2: error: implicit declaration of function 'drm_bridge_init' [-Werror=implicit-function-declaration]
Dan Carpenter [Wed, 28 Jan 2015 06:43:35 +0000 (09:43 +0300)]
drm: Check the right variable when setting formats
When setting the video bus supported formats for a display device using
drm_display_info_set_bus_formats(), check for the proper variable after
duplicating memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
Ajay Kumar [Tue, 20 Jan 2015 16:38:44 +0000 (22:08 +0530)]
drm/bridge: make bridge registration independent of drm flow
Currently, third party bridge drivers(ptn3460) are dependent
on the corresponding encoder driver init, since bridge driver
needs a drm_device pointer to finish drm initializations.
The encoder driver passes the drm_device pointer to the
bridge driver. Because of this dependency, third party drivers
like ptn3460 doesn't adhere to the driver model.
In this patch, we reframe the bridge registration framework
so that bridge initialization is split into 2 steps, and
bridge registration happens independent of drm flow:
--Step 1: gather all the bridge settings independent of drm and
add the bridge onto a global list of bridges.
--Step 2: when the encoder driver is probed, call drm_bridge_attach
for the corresponding bridge so that the bridge receives
drm_device pointer and continues with connector and other
drm initializations.
The old set of bridge helpers are removed, and a set of new helpers
are added to accomplish the 2 step initialization.
The bridge devices register themselves onto global list of bridges
when they get probed by calling "drm_bridge_add".
The parent encoder driver waits till the bridge is available
in the lookup table(by calling "of_drm_find_bridge") and then
continues with its initialization.
The encoder driver should also call "drm_bridge_attach" to pass
on the drm_device to the bridge object.
drm_bridge_attach inturn calls "bridge->funcs->attach" so that
bridge can continue with drm related initializations.
Ajay Kumar [Tue, 20 Jan 2015 16:38:43 +0000 (22:08 +0530)]
drm/bridge: do not pass drm_bridge_funcs to drm_bridge_init
Assign the pointer to bridge ops structure(drm_bridge_funcs) in
the bridge driver itself, instead of passing it to drm_bridge_init.
This will allow bridge driver developer to pack bridge private
information inside the bridge object and pass only the drm-relevant
information to drm_bridge_init.
Ajay Kumar [Tue, 20 Jan 2015 16:38:42 +0000 (22:08 +0530)]
drm/bridge: ptn3460: Few trivial cleanups
This patch does the following changes:
-- Use usleep_range instead of udelay.
-- Remove driver_private member from ptn3460 structure.
-- Make all possible functions and structures static.
-- Use dev_err for non-DRM errors.
-- Arrange header files alphabetically.
-- s/edid/EDID in all error messages.
Thierry Reding [Mon, 8 Dec 2014 14:38:17 +0000 (15:38 +0100)]
drm/panel: sharp: lq101r1sx01: Respect power timings
Before shutting down the display using the DCS display_off command, wait
for 4 frames according to the datasheet.
Furthermore, after enabling the power supply, the supply voltage needs
around 10 ms to settle. After that, another 120 ms is required before a
DCS exit_sleep_mode command can be sent.
While at it, no longer send the DCS soft_reset command. This is totally
unnecessary because we've just powered up the display, hence it will be
in a reset state already.
Thierry Reding [Mon, 8 Dec 2014 14:05:48 +0000 (15:05 +0100)]
drm/panel: sharp: lq101r1sx01: Add delay after display on
After switching the display on (using the DCS display_on command), wait
for 6 frames (100ms at 60 Hz) to give the display more time to prepare.
Failing to do this results in the panel not initializing properly in a
large number of cases.
Philipp Zabel [Wed, 19 Nov 2014 09:29:55 +0000 (10:29 +0100)]
drm/panel: simple: Add support for Giantplus GPG482739QS5
This patch adds support for the GiantPlus GPG48273QS5 4.3" WQVGA TFT LCD
panel to the simple-panel driver.
This panel is connected via a parallel bus and uses both HSYNC and
VSYNC, whose lengths are unfortunately not clearly defined. The
datasheet only specifies the front- and backporch length, but the timing
diagram suggests that both sync signals should be asserted for exactly
one clock cycle.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
The mipi_dsi_packet_create() function dereferences the msg pointer
before checking that it's valid. Move the dereference down to where it
is required to avoid potentially dereferencing a NULL pointer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Linus Torvalds [Wed, 28 Jan 2015 03:12:38 +0000 (19:12 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This feels larger than I'd like but its for three reasons.
a) amdkfd finalising the API more, this is a new feature introduced
last merge window, and I'd prefer to make the tweaks to the API
before it first gets into a stable release.
b) radeon regression required splitting an internal API to fix
properly, so it just changed a few more lines
c) vmwgfx fix changes a lock from a mutex->spin lock, this is fallout
from the new sleep checking.
Otherwise there is just some tda998x fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Remove rdev->gart.pages_addr array
drm/radeon: Restore GART table contents after pinning it in VRAM v3
drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entry
drm/amdkfd: Fix bug in call to init_pipelines()
drm/amdkfd: Fix bug in pipelines initialization
drm/radeon: Don't increment pipe_id in kgd_init_pipeline
drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address
drm/vmwgfx: Replace the hw mutex with a hw spinlock
drm/amdkfd: Allow user to limit only queues per device
drm/amdkfd: PQM handle queue creation fault
drm: tda998x: Fix EDID read timeout on HDMI connect
drm: tda998x: Protect the page register
Dave Airlie [Tue, 27 Jan 2015 23:27:29 +0000 (09:27 +1000)]
Merge tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.20-rc1
The biggest part of these changes is the conversion to atomic mode-
setting. A lot of cleanup and demidlayering was required before the
conversion, with the result being a whole lot of changes.
Besides the atomic mode-setting support, the host1x bus now has the
proper infrastructure to support suspend/resume for child devices.
Finally, a couple of smaller cleanup patches round things off.
* tag 'drm/tegra/for-3.20-rc1' of git://anongit.freedesktop.org/tegra/linux: (54 commits)
drm/tegra: Use correct relocation target offsets
drm/tegra: Add minimal power management
drm/tegra: dc: Unify enabling the display controller
drm/tegra: Track tiling and format in plane state
drm/tegra: Track active planes in CRTC state
drm/tegra: Remove unused ->mode_fixup() callbacks
drm/tegra: Atomic conversion, phase 3, step 3
drm/tegra: Atomic conversion, phase 3, step 2
drm/tegra: dc: Use atomic clock state in modeset
drm/tegra: sor: Implement ->atomic_check()
drm/tegra: hdmi: Implement ->atomic_check()
drm/tegra: dsi: Implement ->atomic_check()
drm/tegra: rgb: Implement ->atomic_check()
drm/tegra: dc: Store clock setup in atomic state
drm/tegra: Atomic conversion, phase 3, step 1
drm/tegra: Atomic conversion, phase 2
drm/tegra: Atomic conversion, phase 1
drm/tegra: dc: Do not needlessly deassert reset
drm/tegra: Output cleanup functions cannot fail
drm/tegra: Remove remnants of the output midlayer
...
1) Don't OOPS on socket AIO, from Christoph Hellwig.
2) Scheduled scans should be aborted upon RFKILL, from Emmanuel
Grumbach.
3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish.
4) Fix RCU locking across copy_to_user() in bpf code, from Alexei
Starovoitov.
5) Lots of crash, memory leak, short TX packet et al bug fixes in
sh_eth from Ben Hutchings.
6) Fix memory corruption in SCTP wrt. INIT collitions, from Daniel
Borkmann.
7) Fix return value logic for poll handlers in netxen, enic, and bnx2x.
From Eric Dumazet and Govindarajulu Varadarajan.
8) Header length calculation fix in mac80211 from Fred Chou.
9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths.
From Ezequiel Garcia.
10) udp_diag has bogus logic in it's hash chain skipping, copy same fix
tcp diag used. From Herbert Xu.
11) amd-xgbe programs wrong rx flow control register, from Thomas
Lendacky.
12) Fix race leading to use after free in ping receive path, from Subash
Abhinov Kasiviswanathan.
13) Cache redirect routes otherwise we can get a heavy backlog of rcu
jobs liberating DST_NOCACHE entries. From Hannes Frederic Sowa.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
net: don't OOPS on socket aio
stmmac: prevent probe drivers to crash kernel
bnx2x: fix napi poll return value for repoll
ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
sh_eth: Fix DMA-API usage for RX buffers
sh_eth: Check for DMA mapping errors on transmit
sh_eth: Ensure DMA engines are stopped before freeing buffers
sh_eth: Remove RX overflow log messages
ping: Fix race in free in receive path
udp_diag: Fix socket skipping within chain
can: kvaser_usb: Fix state handling upon BUS_ERROR events
can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT
can: kvaser_usb: Send correct context to URB completion
can: kvaser_usb: Do not sleep in atomic context
ipv4: try to cache dst_entries which would cause a redirect
samples: bpf: relax test_maps check
bpf: rcu lock must not be held when calling copy_to_user()
net: sctp: fix slab corruption from use after free on INIT collisions
net: mv643xx_eth: Fix highmem support in non-TSO egress path
sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers
...
Andy Shevchenko [Tue, 27 Jan 2015 16:38:03 +0000 (18:38 +0200)]
stmmac: prevent probe drivers to crash kernel
In the case when alloc_netdev fails we return NULL to a caller. But there is no
check for NULL in the probe drivers. This patch changes NULL to an error
pointer. The function description is amended to reflect what we may get
returned.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 27 Jan 2015 18:04:38 +0000 (10:04 -0800)]
Merge tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
"Two powerpc fixes"
* tag 'powerpc-3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc/powernv: Restore LPCR with LPCR_PECE1 cleared
powerpc/xmon: Fix another endiannes issue in RTAS call from xmon
Linus Torvalds [Tue, 27 Jan 2015 17:02:09 +0000 (09:02 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull one more module fix from Rusty Russell:
"SCSI was using module_refcount() to figure out when the module was
unloading: this broke with new atomic refcounting. The code is still
suspicious, but this solves the WARN_ON()"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
scsi: always increment reference count
Thierry Reding [Mon, 8 Dec 2014 15:32:47 +0000 (16:32 +0100)]
drm/tegra: dc: Unify enabling the display controller
Previously output drivers would enable continuous display mode and power
up the display controller at various points during the initialization.
This is suboptimal because it accesses display controller registers in
output drivers and duplicates a bit of code.
Move this code into the display controller driver and enable the display
controller as the final step of the ->mode_set_nofb() implementation.
Thierry Reding [Fri, 28 Nov 2014 12:14:55 +0000 (13:14 +0100)]
drm/tegra: Track tiling and format in plane state
Tracking these in the plane state allows them to be computed in the
->atomic_check() callback and reused when applying the configuration in
->atomic_update().
Thierry Reding [Wed, 26 Nov 2014 11:28:39 +0000 (12:28 +0100)]
drm/tegra: Track active planes in CRTC state
Wrap struct drm_crtc_state in a driver-specific structure and add the
planes field which keeps track of which planes are updated or disabled
during a modeset. This allows atomic updates of the the display engine
at ->atomic_flush() time.
v2: open-code getting the state of the CRTC that the plane is being
attached to (Daniel Vetter)
Thierry Reding [Mon, 24 Nov 2014 16:41:23 +0000 (17:41 +0100)]
drm/tegra: Atomic conversion, phase 3, step 3
Provide a custom ->atomic_commit() implementation which supports async
commits. The generic atomic page-flip helper can use this to implement
page-flipping.
Thierry Reding [Mon, 24 Nov 2014 16:08:20 +0000 (17:08 +0100)]
drm/tegra: Atomic conversion, phase 3, step 2
Replace drm_crtc_helper_set_config() by drm_atomic_helper_set_config().
All drivers have now been converted to use ->atomic_check() to set the
atomic state, therefore the atomic mode setting helpers can be used.
Thierry Reding [Fri, 19 Dec 2014 14:09:16 +0000 (15:09 +0100)]
drm/tegra: dc: Use atomic clock state in modeset
All clock state is now stored in the display controller's atomic state,
so the output drivers no longer need to call back into the display
controller driver to set up the clock. This is also required to make
sure no hardware changes are made before validating a configuration.
Thierry Reding [Mon, 8 Dec 2014 16:26:46 +0000 (17:26 +0100)]
drm/tegra: sor: Implement ->atomic_check()
The implementation of the ->atomic_check() callback precomputes all
parameters to check if the given configuration can be applied. If so the
precomputed values are stored in the atomic state object for the encoder
and applied during modeset. In that way the modeset no longer needs to
perform any checking but simply program values into registers.
Thierry Reding [Mon, 8 Dec 2014 15:33:03 +0000 (16:33 +0100)]
drm/tegra: hdmi: Implement ->atomic_check()
The implementation of the ->atomic_check() callback precomputes all
parameters to check if the given configuration can be applied. If so the
precomputed values are stored in the atomic state object for the encoder
and applied during modeset. In that way the modeset no longer needs to
perform any checking but simply program values into registers.
Thierry Reding [Mon, 8 Dec 2014 15:22:28 +0000 (16:22 +0100)]
drm/tegra: dsi: Implement ->atomic_check()
The implementation of the ->atomic_check() callback precomputes all
parameters to check if the given configuration can be applied. If so the
precomputed values are stored in the atomic state object for the encoder
and applied during modeset. In that way the modeset no longer needs to
perform any checking but simply program values into registers.
Thierry Reding [Wed, 17 Dec 2014 16:04:36 +0000 (17:04 +0100)]
drm/tegra: rgb: Implement ->atomic_check()
The implementation of the ->atomic_check() callback precomputes all
parameters to check if the given configuration can be applied. If so the
precomputed values are stored in the atomic state object for the encoder
and applied during modeset. In that way the modeset no longer needs to
perform any checking but simply program values into registers.
Thierry Reding [Mon, 8 Dec 2014 15:14:45 +0000 (16:14 +0100)]
drm/tegra: dc: Store clock setup in atomic state
This allows the clock setup to be separated from the clock programming
and better matches the expectations of the atomic modesetting where no
code paths must fail during modeset.
Thierry Reding [Mon, 24 Nov 2014 16:08:06 +0000 (17:08 +0100)]
drm/tegra: Atomic conversion, phase 3, step 1
Switch out the regular plane helpers for the atomic plane helpers. Also
use the default atomic helpers to implement the ->atomic_check() and
->atomic_commit() callbacks. The driver now exclusively uses the atomic
interfaces.
Thierry Reding [Mon, 24 Nov 2014 16:02:53 +0000 (17:02 +0100)]
drm/tegra: Atomic conversion, phase 2
Hook up the default ->reset() and ->atomic_duplicate_state() helpers.
This ensures that state objects are properly created and framebuffer
reference counts correctly maintained.
Thierry Reding [Mon, 24 Nov 2014 15:27:13 +0000 (16:27 +0100)]
drm/tegra: Atomic conversion, phase 1
Implement initial atomic state handling. Hook up the CRTCs, planes' and
connectors' ->atomic_destroy_state() callback to ensure that the atomic
state objects don't leak.
Furthermore the CRTC now implements the ->mode_set_nofb() callback that
is used by new helpers to implement ->mode_set() and ->mode_set_base().
These new helpers also make use of the new plane helper functions which
the driver now provides.
Thierry Reding [Fri, 16 Jan 2015 15:30:55 +0000 (16:30 +0100)]
drm/tegra: dc: Do not needlessly deassert reset
Commit 9c0127004ff4 ("drm/tegra: dc: Add powergate support") changed the
driver's ->probe() implementation to deassert the module reset, and with
there being nobody else to assert it until ->remove() there is no need
to deassert again later on.
Thierry Reding [Fri, 28 Nov 2014 14:41:34 +0000 (15:41 +0100)]
drm/tegra: sor: Demidlayer
Implement encoder and connector within the eDP driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Thierry Reding [Tue, 2 Dec 2014 16:30:23 +0000 (17:30 +0100)]
drm/tegra: dsi: Demidlayer
Implement encoder and connector within the DSI driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Thierry Reding [Fri, 28 Nov 2014 15:50:59 +0000 (16:50 +0100)]
drm/tegra: hdmi: Demidlayer
Implement encoder and connector within the HDMI driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Thierry Reding [Tue, 16 Dec 2014 17:30:16 +0000 (18:30 +0100)]
drm/tegra: rgb: Demidlayer
Implement encoder and connector within the RGB driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Thierry Reding [Tue, 2 Dec 2014 14:12:28 +0000 (15:12 +0100)]
drm/tegra: output: Make ->setup_clock() optional
In order to transition output drivers to using the struct tegra_output
as a helper rather than midlayer, make this callback optional. Instead
drivers should implement the equivalent as part of ->mode_fixup(). For
the conversion to atomic modesetting a new callback ->atomic_check()
should be implemented that updates the display controller's state with
the corresponding parent clock, rate and shift clock divider.
Thierry Reding [Fri, 28 Nov 2014 14:38:40 +0000 (15:38 +0100)]
drm/tegra: Convert output midlayer to helpers
The output layer was initially designed to help reduce the amount of
code duplicated in output drivers. An unfortunate side-effect of that
was that it turned into a midlayer and it became difficult to make the
output drivers work without bending over backwards to fit into the
midlayer.
This commit starts to convert the midlayer into a helper library by
exporting most of the common functions so that they can be used by the
output drivers directly. Doing so will allow output drivers to reuse
common code paths but more easily override them where necessary.
Thierry Reding [Mon, 8 Dec 2014 15:03:53 +0000 (16:03 +0100)]
drm/tegra: dc: Wait for idle when disabled
When disabling the display controller, stop it and wait for it to become
idle. Doing so ensures that no further accesses to the framebuffer occur
and the buffers can be safely unmapped or freed.
projects / linux-beck.git / log