staging: comedi: dt282x: cleanup analog output range table
The DT2821 series boards do not have programmable analog output ranges.
The range is set, per-channel, with jumpers on the board.
Currently the user has to pass some configuration options when attaching
to the driver in order to set the range for each channel. If they do not
pass the range options they will default to 0. If they pass an invalid
range option they will also default to 0. The 0 range option is bipolar
10V. If the user passes a range option that does not match the hardware
setting it doesn't cause any problems in the driver it just causes the
user space comedilib library to incorrectly convert the hardware values
to physical values.
Make the attach a bit simpler by deprecating these options and providing
a range table with all the valid ranges for the analog outputs. The user
can then select the correct range when they use the comedilib functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: fix Analog Input se/diff channel configuration
Most of the boards supported by this driver can do either single-ended or
differential Analog Input but there are a couple that can only do one or
the other. On the boards that can do both the type of input is set with
jumpers on the board.
The 'it->options[4]' passed by the user during the board (*attach) is used
to determine how the Analog Inputs are configured. This is used to set
the subdevice flags and number of channels correctly.
Fix the check of this option so that it only applies when the board can
actually do differential input. Also, default to differential inputs if
that is the only mode the board supports.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This enum is used to index the 'options' values that are passed
by the user attaches to the driver. These options are identified
in the comedi comment block.
For aesthetics, remove the enum and just open code the index values.
Refactor the Analog Input subdevice init so that the it->options[4],
indicating differential inputs, does not have to be checked multiple
times.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: tidy up dt282x_ai_dma_interrupt()
The main interrupt handler already has the comedi_subdevice pointer
needed in this function. Pass that subdevice pointer so that it does
not need to be fetched as a local variable.
Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: tidy up dt282x_ao_dma_interrupt()
The main interrupt handler already has the comedi_subdevice pointer
needed in this function. Pass that subdevice pointer so that it does
not need to be fetched as a local variable.
Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: remove sanity checks of 's->async->prealloc_buf'
The comedi core sanity checks that the subdevice has a buffer allocated
before allowing an async command to start. The helper functions in comedi_buf
will also sanity check the buffer as a side effect of the 'alloc' helpers
with reading or writing data for the buffer.
Remove the unnecessary sanity checks in the ai/ao dma interrupt handlers.
This will allow the handlers to disable the dma and then fail when they
try to read/write the buffer. Currently dma is left enabled due to the
sanity checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: IRQ and DMA are needed for async command support
This driver requires an IRQ and 2 DMA channels in order to execute async
commands.
Modify the (*attach) so that command support is only hooked up if
DMA is available. This allows removing the extra checks in the
command support functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: remove 'volatile' on private data variables
As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The (*insn_write) functions are expected to write 'insn->n' samples to the
hardware. Fix this function so it works like the comedi core expects.
The comedi core sanity checks that the samples are within the 'maxdata' range
of the subdevice before calling the (*insn_write) so this function does not
need to mask each sample by 's->maxdata'.
Also, the wrong '*2scomp' flag in the private data was being checked to see
if the sample needs to be munged before being written. Fix this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: convert 'dabits' boardinfo to 'ao_maxdata'
This member of the boardinfo is the number of bits in the analog output data.
Convert this member into the subdevice 'maxdata', (1 << board->dabits) - 1,
to avoid needing to do the calculation.
Use the subdevice 'maxdata' in the driver instead of using the boardinfo and
use the comedi_offset_munge() helper to convert the two's complement data to
the offset binary form that the comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: convert 'adbits' boardinfo to 'ai_maxdata'
This member of the boardinfo is the number of bits in the analog input data.
Convert this member into the subdevice 'maxdata', (1 << board->adbits) - 1,
to avoid needing to do the calculation.
Use the subdevice 'maxdata' in the driver instead of using the boardinfo and
use the comedi_offset_munge() helper to convert the two's complement data to
the offset binary form that the comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce an inline helper to return the number of bytes that are
ready to read from the comedi_async buffer. Use the helper in the
comedi drivers that currently do the calculation as part of the
(*poll) operation.
Also, use the helper in comedi_fops where the calculation is used as
part of the subdevice going nonbusy.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Himangi Saraogi [Sat, 21 Jun 2014 15:09:51 +0000 (20:39 +0530)]
Staging: rtl8192e: adjust error handling
This patch removes a test in error handling code by adding a return
path.
The Coccinelle semantic match that found the problem is:
// <smpl>
@@
expression E,E1,E2;
@@
E = alloc_etherdev(...)
... when != E = E1
if (...) { ... free_netdev(E); ... return ...; }
... when != E = E2
(
if (...)
{
... when != free_netdev(E);
return dev; }
|
* if (...)
{
... when != free_netdev(E);
return ...; }
|
register_netdev(E)
)
This is a patch to the serqt_usb2.c file that fixes three instances
of the following checkpatch.pl warning:
WARNING: else is not generally useful after a break or return
Signed-off-by: Vincent Heuken <me@vincentheuken.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: fix sparse warnings for static symbols
This patch fixes the following sparse warnings:
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:46:20: warning: symbol 'the_ksocklnd' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:49:19: warning: symbol 'ksocknal_ip2iface' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:67:15: warning: symbol 'ksocknal_create_route' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:103:1: warning: symbol 'ksocknal_create_peer' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:218:1: warning: symbol 'ksocknal_unlink_peer_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:248:1: warning: symbol 'ksocknal_get_peer_info' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:323:1: warning: symbol 'ksocknal_associate_route_conn_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:368:1: warning: symbol 'ksocknal_add_route_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:409:1: warning: symbol 'ksocknal_del_route_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:511:1: warning: symbol 'ksocknal_del_peer_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:566:1: warning: symbol 'ksocknal_del_peer' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:624:14: warning: symbol 'ksocknal_get_conn_by_idx' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:661:15: warning: symbol 'ksocknal_choose_scheduler_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:685:1: warning: symbol 'ksocknal_local_ipvec' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:713:1: warning: symbol 'ksocknal_match_peerip' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:745:1: warning: symbol 'ksocknal_select_ips' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:847:1: warning: symbol 'ksocknal_create_routes' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:997:1: warning: symbol 'ksocknal_connecting' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1853:1: warning: symbol 'ksocknal_push_peer' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1886:1: warning: symbol 'ksocknal_push' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1935:1: warning: symbol 'ksocknal_add_interface' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1997:1: warning: symbol 'ksocknal_peer_del_interface_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2038:1: warning: symbol 'ksocknal_del_interface' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2213:1: warning: symbol 'ksocknal_free_buffers' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2256:1: warning: symbol 'ksocknal_base_shutdown' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2349:1: warning: symbol 'ksocknal_new_incarnation' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2364:1: warning: symbol 'ksocknal_base_startup' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2496:1: warning: symbol 'ksocknal_debug_peerhash' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2603:1: warning: symbol 'ksocknal_enumerate_interfaces' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2660:1: warning: symbol 'ksocknal_search_new_ipif' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2702:1: warning: symbol 'ksocknal_start_schedulers' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2748:1: warning: symbol 'ksocknal_net_start_threads' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2860:1: warning: symbol 'ksocknal_module_fini' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2866:1: warning: symbol 'ksocknal_module_init' was not declared. Should it be static?
Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Tue, 24 Jun 2014 13:03:57 +0000 (15:03 +0200)]
staging: rtl8723au: Only validate vendor specific ies, when they it is vendor specific
Don't run rtw_validate_vendor_specific_ies() on anything but
WLAN_EID_VENDOR_SPECIFIC. In addition use the proper
WLAN_OUI_TYPE_MICROSOFT_* definitions.
Jes Sorensen [Tue, 24 Jun 2014 13:03:29 +0000 (15:03 +0200)]
staging: rtl8723au: Stop carrying half the beacon frame header in the stored IE array
This gets rid of the odd carrying of half the beacon frame in the IE
array stored for the network. Instead we rely on the relevant fields
(timestamp, beacon_interval, and capability) stored in struct
wlan_bssid_ex.
Carrying only half the ieee80211_mgmt header led to a number of bugs
and simply obfuscated the code.
I have tried catching all instances relying on these three elements in
the IEs array, but missed cases may still need to be tracked down.
Jes Sorensen [Tue, 24 Jun 2014 13:03:20 +0000 (15:03 +0200)]
staging: rtl8723au: rtw_add_beacon(): Construct a full beacon frame for validation
Clean up and correct the beacon frame validation using a full beacon
frame, and pass that to rtw_check_beacon_data23a(). Previous we went
through hoops to construct the frame, minus the ieee80211_3addr header
which just made it more complicated, and resulted in inconsistencies
and bugs.
Linus Torvalds [Sun, 22 Jun 2014 05:01:15 +0000 (19:01 -1000)]
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c new drivers from Wolfram Sang:
"Here is a pull request from i2c hoping for the "new driver" rule.
Originally, I wanted to send this request during the merge window, but
code checkers with very recent additions complained, so a few fixups
were needed. So, some more time went by and I merged rc1 to get a
stable base"
So the "new driver" rule is really about drivers that people absolutely
need for the kernel to work on new hardware, which is not so much the
case for i2c. So I considered not pulling this, but eventually
relented.
Just for FYI: the whole (and only) point of "new drivers" is not that
new drivers cannot regress things (they can, and they have - by
triggering badly tested code on machines that never triggered that code
before), but because they can bring to life machines that otherwise
wouldn't be useful at all without the drivers.
So the new driver rule is for essential things that actual consumers
would care about, ie devices like networking or disk drivers that matter
to normal people (not server people - they run old kernels anyway, so
mainlining new drivers is irrelevant for them).
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sun6-p2wi: fix call to snprintf
i2c: rk3x: add NULL entry to the end of_device_id array
i2c: sun6i-p2wi: use proper return value in probe
i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support
i2c: sunxi: add P2WI DT bindings documentation
i2c: rk3x: add driver for Rockchip RK3xxx SoC I2C adapter
Linus Torvalds [Sun, 22 Jun 2014 02:40:30 +0000 (16:40 -1000)]
Merge tag 'locks-v3.16-2' of git://git.samba.org/jlayton/linux
Pull file locking fixes from Jeff Layton:
"File locking related bugfixes
Nothing too earth-shattering here. A fix for a potential regression
due to a patch in pile #1, and the addition of a memory barrier to
prevent a race condition between break_deleg and generic_add_lease"
* tag 'locks-v3.16-2' of git://git.samba.org/jlayton/linux:
locks: set fl_owner for leases back to current->files
locks: add missing memory barrier in break_deleg
Linus Torvalds [Sun, 22 Jun 2014 02:38:16 +0000 (16:38 -1000)]
Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
"There are three fixes for regressions caused by the relative paths
series: deb-pkg, tar-pkg and *docs did not work with O=.
Plus, there is a fix for the linux-headers deb package and a fixed
typo. These are not regression fixes but are safe enough"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: fix a typo in a kbuild document
builddeb: fix missing headers in linux-headers package
Documentation: Fix DocBook build with relative $(srctree)
kbuild: Fix tar-pkg with relative $(objtree)
deb-pkg: Fix for relative paths
Linus Torvalds [Sun, 22 Jun 2014 00:21:43 +0000 (14:21 -1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This fixes some lockups in btrfs reported with rc1. It probably has
some performance impact because it is backing off our spinning locks
more often and switching to a blocking lock. I'll be able to nail
that down next week, but for now I want to get the lockups taken care
of.
Otherwise some more stack reduction and assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix wrong error handle when the device is missing or is not writeable
Btrfs: fix deadlock when mounting a degraded fs
Btrfs: use bio_endio_nodec instead of open code
Btrfs: fix NULL pointer crash when running balance and scrub concurrently
btrfs: Skip scrubbing removed chunks to avoid -ENOENT.
Btrfs: fix broken free space cache after the system crashed
Btrfs: make free space cache write out functions more readable
Btrfs: remove unused wait queue in struct extent_buffer
Btrfs: fix deadlocks with trylock on tree nodes
Linus Torvalds [Sun, 22 Jun 2014 00:20:38 +0000 (14:20 -1000)]
Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
"Fixes for a new regression from the xdr encoding rewrite, and a
delegation problem we've had for a while (made somewhat more annoying
by the vfs delegation support added in 3.13)"
* 'for-3.16' of git://linux-nfs.org/~bfields/linux:
NFSD: fix bug for readdir of pseudofs
NFSD: Don't hand out delegations for 30 seconds after recalling them.
Jes Sorensen [Sat, 21 Jun 2014 14:50:16 +0000 (16:50 +0200)]
staging: rtl8723au: rtw_survey_event_cb23a(): Remember to clone beacon data
We need to clone all the beacon information, not just the IE data, in
particular as the long term goal is to stop carrying this information
in the IE data.
Linus Torvalds [Sat, 21 Jun 2014 17:07:17 +0000 (07:07 -1000)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This is larger than usual: the main reason are the ARM symbol lookup
speedups that came in late and were hard to resist.
There's also a kprobes fix and various tooling fixes, plus the minimal
re-enablement of the mmap2 support interface"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/kprobes: Fix build errors and blacklist context_track_user
perf tests: Add test for closing dso objects on EMFILE error
perf tests: Add test for caching dso file descriptors
perf tests: Allow reuse of test_file function
perf tests: Spawn child for each test
perf tools: Add dso__data_* interface descriptons
perf tools: Allow to close dso fd in case of open failure
perf tools: Add file size check and factor dso__data_read_offset
perf tools: Cache dso data file descriptor
perf tools: Add global count of opened dso objects
perf tools: Add global list of opened dso objects
perf tools: Add data_fd into dso object
perf tools: Separate dso data related variables
perf tools: Cache register accesses for unwind processing
perf record: Fix to honor user freq/interval properly
perf timechart: Reflow documentation
perf probe: Improve error messages in --line option
perf probe: Improve an error message of perf probe --vars mode
perf probe: Show error code and description in verbose mode
perf probe: Improve error message for unknown member of data structure
...
Linus Torvalds [Sat, 21 Jun 2014 17:06:02 +0000 (07:06 -1000)]
Merge branch 'locking-urgent-for-linus.patch' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rtmutex fixes from Thomas Gleixner:
"Another three patches to make the rtmutex code more robust. That's
the last urgent fallout from the big futex/rtmutex investigation"
* 'locking-urgent-for-linus.patch' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Plug slow unlock race
rtmutex: Detect changes in the pi lock chain
rtmutex: Handle deadlock detection smarter
Linus Torvalds [Sat, 21 Jun 2014 16:47:01 +0000 (06:47 -1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 patches from Martin Schwidefsky:
"A couple of bug fixes, a debug change for qdio, an update for the
default config, and one small extension.
The watchdog module based on diagnose 0x288 is converted to the
watchdog API and it now works under LPAR as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ccwgroup: use ccwgroup_ungroup wrapper
s390/ccwgroup: fix an uninitialized return code
s390/ccwgroup: obtain extra reference for asynchronous processing
qdio: Keep device-specific dbf entries
s390/compat: correct ucontext layout for high gprs
s390/cio: set device name as early as possible
s390: update default configuration
s390: avoid format strings leaking into names
s390/airq: silence lockdep warning
s390/watchdog: add support for LPAR operation (diag288)
s390/watchdog: use watchdog API
s390/sclp_vt220: Enable ASCII console per default
s390/qdio: replace shift loop by ilog2
s390/cio: silence lockdep warning
s390/uaccess: always load the kernel ASCE after task switch
s390/ap_bus: Make modules parameters visible in sysfs
Linus Torvalds [Sat, 21 Jun 2014 16:45:54 +0000 (06:45 -1000)]
Merge tag 'for-linus' of git://github.com/gxt/linux
Pull UniCore32 bug fixes from Guan Xuetao:
"This includes bugfixes to make unicore32 successfully build under
defconfig, and some changes for allmodconfig (though not finished)"
* tag 'for-linus' of git://github.com/gxt/linux:
unicore32: Remove ARCH_HAS_CPUFREQ config option
UniCore32: Change git tree location information in MAINTAINERS
arch: unicore32: ksyms: export '__cpuc_coherent_kern_range' to avoid compiling failure
arch: unicore32: ksyms: export 'pm_power_off' to avoid compiling failure.
arch: unicore32: ksyms: export additional find_first_*() to avoid compiling failure
arch:unicore32:mm: add devmem_is_allowed() to support STRICT_DEVMEM
unicore32: include: asm: add missing ')' for PAGE_* macros in pgtable.h
arch/unicore32/kernel/setup.c: add generic 'screen_info' to avoid compiling failure
drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause"
arch: unicore32: kernel: ksyms: remove 'bswapsi2' and 'muldi3' to avoid compiling failure
arch/unicore32/kernel/ksyms.c: remove 2 export symbols to avoid compiling failure
drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue MIME-Version: 1.0
drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue
arch/unicore32/include/asm/io.h: add readl_relaxed() generic definition
arch/unicore32/include/asm/ptrace.h: add generic definition for profile_pc()
arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error
arch/unicore32/kernel/clock.c: add readl() and writel() for 'PM_' macros
arch/unicore32/kernel/module.c: use __vmalloc_node_range() instead of __vmalloc_area()
arch/unicore32/kernel/ksyms.c: remove several undefined exported symbols
Linus Torvalds [Sat, 21 Jun 2014 16:43:19 +0000 (06:43 -1000)]
Merge tag 'char-misc-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are 3 patches, one a revert of the UIO patch you objected to in
3.16-rc1 and that no one wanted to defend, a w1 driver bugfix, and a
MAINTAINERS update for the vmware balloon driver.
All of these, except for the MAINTAINERS update which just got added,
have been in linux-next just fine"
* tag 'char-misc-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: add entry for VMware Balloon driver
w1: mxc_w1: Fix incorrect "presence" status
Revert "uio: fix vma io range check in mmap"
projects / linux-beck.git / log