staging: sm750fb: remove redundant __func__ in debug statement
This patch removes the redundant __func__ from dynamic debug prints as
the pr_xxx set of functions can be dynamically controlled to include
function name.Also fix a typo in debug statement.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Santhosh Pai [Mon, 29 Jun 2015 09:44:03 +0000 (10:44 +0100)]
staging: Comedi: comedi_fops: Fixed the return error code
This patch fixes the checkpatch.pl warning:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
try_module_get fails when the reference count of the module is not
allowed to be incremented ,and hence -ENXIO is returned indicating
no device or address.
[IA - combined two of santhosh's changes to the error return value!]
Signed-off-by: santhosh pai <santhosh.pai88@yahoo.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 7 Jul 2015 16:06:52 +0000 (17:06 +0100)]
staging: comedi: use CAP_SYS_ADMIN instead of CAP_NET_ADMIN
If the "comedi" module has been loaded with the
"comedi_num_legacy_minors" module parameter set to a non-zero value,
some reserved comedi devices get created. These can be attached to a
low-level comedi driver using the `COMEDI_DEVCONFIG` ioctl command,
which checks for the `CAP_SYS_ADMIN` capability. Of course, the comedi
device needs to be opened before the ioctl command can be sent. If the
comedi device is unattached, `comedi_open()` currently requires the
`CAP_NET_ADMIN` capability. It makes more sense to just require the
`CAP_SYS_ADMIN` capability here, so change it.
For the curious, commit a8f80e8ff94e ("Networking: use CAP_NET_ADMIN
when deciding to call request_module") changed this capability from
`CAP_SYS_MODULE` to `CAP_NET_ADMIN`, even though it doesn't seem
relevant here. The original `CAP_SYS_MODULE` capability was due to the
function having some code to request a module using a "char-major-%i-%i"
alias, but that was never compiled in and was removed by commit f30f2c2d417b ("staging: comedi: remove check for CONFIG_KMOD").
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 7 Jul 2015 17:06:07 +0000 (18:06 +0100)]
staging: comedi: cb_pcimdas: add external analog output ranges
The analog output range is not programmable, but the ranges for each of
the two analog output channels are settable via jumpers. These jumper
settings are not readable by the driver. The driver
provides a range table containing all the possible internal ranges
(+/-10V, +/-5V, 0-10V, 0-5V) to provide information to the user
application (although any range selected by the application that differs
from the jumper settings will not produce the expected voltage output).
The range table does not cover all possible ranges of the analog output
channels. The jumpers also allow an external reference voltage between
0 and 10V to be used as bipolar or unipolar output range. Add a couple
more ranges to the end of the range table to define these two external
ranges.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16m1: fix lines over 80 characters
Warnings found by checkpatch.pl
WARNING: line over 80 characters
/drivers/staging/comedi/drivers/das16m1.c:414
+ if (devpriv->adc_count == 0 && hw_counter == devpriv->initial_hw_count) {
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Warning found by checkpatch.pl
WARNING: please, no space before tabs
/drivers/staging/comedi/drivers/das16m1.c:83
+ 404-407 ^I8254$
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixes checkpatch.pl WARNING: quoted string split across lines
+MODULE_AUTHOR("David A. Schleef <ds@schleef.org>, "
+ "Frank Mori Hess <fmhess@users.sourceforge.net>");
Modules with multiple authors have a MODULE_AUTHOR line for each one.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Elfring [Tue, 14 Jul 2015 07:35:42 +0000 (09:35 +0200)]
staging: lustre: Deletion of unnecessary checks before three function calls
The following functions test whether their argument is NULL and then
return immediately.
* kfree
* ll_file_data_put
* ptlrpc_connection_put
Thus the test around such calls is not needed.
This issue was detected by using the Coccinelle software.
See also a previous update suggestion:
"remove unneeded null test before free" by Julia Lawall
https://lkml.org/lkml/2015/5/1/498
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg878600.html
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging/lustre/libcfs: get rid of debugfs/lnet/console_{min, max}_delay_centisecs
They are just fancy module parameters wrappers,
so just the same functionality now would be accessible via
/sys/module/libcfs/parameters/libcfs_console_{min,max}_delay
staging/lustre/libcfs: get rid of debugfs/lnet/debug_mb
It's just a fancy libcfs_debug_mb module parameter wrapper,
so just add debug buffer size check and resizing and the same
functionality now would be accessible via
/sys/module/libcfs/parameters/libcfs_debug_mb
staging/lustre/libcfs: get rid of debugfs/lnet/console_backoff
module parameter libcfs_console_backoff accessible through
/sys/module/libcfs/parameters/libcfs_console_backoff would
do the same thing, just add a special "uintpos" parameter
type to disallow 0 values too.
Also add a symlink to the module parameter variable for
backwards compatibility
/proc/sys/lnet/console_ratelimit, debug_path and panic_on_lbug
are module parameters with no special magic accessible via
/sys/module/libcfs/parameters/libcfs_console_ratelimit,
/sys/module/libcfs/parameters/libcfs_debug_file_path and
/sys/module/libcfs/parameters/libcfs_panic_on_lbug respectively.
As such just replace them with corresponding symlinks
staging/lustre: Remove unneeded ldlm_timeout control
ldlm_timeout is used server-side to determine AST timeouts,
so it makes no sense on the client, esp. since it's not really used
anywhere.
Remove all traces of it except from the config where make
it a noop.
staging/lustre: Remove now obsolete memory tracking sysctls
In the past when Lustre did its own allocation amounts tracking
the results were shown in sysctl as current and overall max
number of bytes and pages allocated. Now that we don't
track these, remove the sysctls.
staging/lustre/obdclass: fix class_procfs_init error return value
Dan Carpenter noticed that procfs conversion patches introduced
a bug where should kobject_create_and_add, an error is not returned
from class_procfs_init.
staging/lustre/ldlm: In ldlm_pools_fini make sure there was init first.
It turns out if you call ldlm_pools_fini without completing the
ldlm_pools_init, then attempt to unregister not yet registered
shrinkers makes the kernel very unhappy.
So make sure we have them registered first.
ldebugfs_remove is usually called on directories with files passed in
as attributes, so simple debugfs_remove failes on them as not empty
Switch to debugfs_remove_recursive.
This fixes a number of problems where a new filesystem is mounted after
being unmounted first.
Oleg Drokin [Wed, 24 Jun 2015 14:07:45 +0000 (10:07 -0400)]
staging/lustre/lnet: Move asm/irq.h include after linux includes
Apparently m86k cannot build if you include asm/irq.h before
linux/* includes and fixing it there is hard.
So just move asm/irq.h include to where it does not cause any problems.
Thanks to Geert Uytterhoeven for getting to the root of it.
staging: wilc1000: switch printks to vsprintf IPv4 extension
Switch printks with IP addresses to use vsprintf extension %pI4.
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 30 Jun 2015 08:21:51 +0000 (13:51 +0530)]
staging: wilc1000: fix build failure
commit 80279fb7ba5b ("cfg80211: properly send
NL80211_ATTR_DISCONNECTED_BY_AP in disconnect") has changed the api of
cfg80211_disconnected() and caused a build failure.
Add the extra argument as false since it appears from the code that the
disconnection is not locally generated.
And incase of doubt we can use false as that is the default behaviour.
Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull late x86 platform driver updates from Darren Hart:
"The following came in a bit later and I wanted them to bake in next a
few more days before submitting, thus the second pull.
A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
dell-laptop, a couple minor fixes, and some updated documentation in
the dell-laptop comments.
intel_pmc_ipc:
- Add Intel Apollo Lake PMC IPC driver
tc1100-wmi:
- Delete an unnecessary check before the function call "kfree"
dell-laptop:
- Fix allocating & freeing SMI buffer page
- Show info about WiGig and UWB in debugfs
- Update information about wireless control"
* tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver
tc1100-wmi: Delete an unnecessary check before the function call "kfree"
dell-laptop: Fix allocating & freeing SMI buffer page
dell-laptop: Show info about WiGig and UWB in debugfs
dell-laptop: Update information about wireless control
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
Commit 835a6a2f8603 ("Bluetooth: Stop sabotaging list poisoning")
thought that the code was sabotaging the list poisoning when NULL'ing
out the list pointers and removed it.
But what was going on was that the bluetooth code was using NULL
pointers for the list as a way to mark it empty, and that commit just
broke it (and replaced the test with NULL with a "list_empty()" test on
a uninitialized list instead, breaking things even further).
So fix it all up to use the regular and real list_empty() handling
(which does not use NULL, but a pointer to itself), also making sure to
initialize the list properly (the previous NULL case was initialized
implicitly by the session being allocated with kzalloc())
This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong
An.
[ I would normally expect to get this through the bt tree, but I'm going
to release -rc1, so I'm just committing this directly - Linus ]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"It's been a busy development cycle for target-core in a number of
different areas.
The fabric API usage for se_node_acl allocation is now within
target-core code, dropping the external API callers for all fabric
drivers tree-wide.
There is a new conversion to RCU hlists for se_node_acl and
se_portal_group LUN mappings, that turns fast-past LUN lookup into a
completely lockless code-path. It also removes the original
hard-coded limitation of 256 LUNs per fabric endpoint.
The configfs attributes for backends can now be shared between core
and driver code, allowing existing drivers to use common code while
still allowing flexibility for new backend provided attributes.
The highlights include:
- Merge sbc_verify_dif_* into common code (sagi)
- Remove iscsi-target support for obsolete IFMarker/OFMarker
(Christophe Vu-Brugier)
- Add bidi support in target/user backend (ilias + vangelis + agover)
- Move se_node_acl allocation into target-core code (hch)
- Add crc_t10dif_update common helper (akinobu + mkp)
- Handle target-core odd SGL mapping for data transfer memory
(akinobu)
- Move transport ID handling into target-core (hch)
- Move task tag into struct se_cmd + support 64-bit tags (bart)
- Convert se_node_acl->device_list[] to RCU hlist (nab + hch +
paulmck)
- Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch +
paulmck)
- Simplify target backend driver registration (hch)
- Consolidate + simplify target backend attribute implementations
(hch + nab)
- Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch)
- Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab)
- Drop unnecessary core_tpg_register TFO parameter (nab)
- Use 64-bit LUNs tree-wide (hannes)
- Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits)
target: Bump core version to v5.0
target: remove target_core_configfs.h
target: remove unused TARGET_CORE_CONFIG_ROOT define
target: consolidate version defines
target: implement WRITE_SAME with UNMAP bit using ->execute_unmap
target: simplify UNMAP handling
target: replace se_cmd->execute_rw with a protocol_data field
target/user: Fix inconsistent kmap_atomic/kunmap_atomic
target: Send UA when changing LUN inventory
target: Send UA upon LUN RESET tmr completion
target: Send UA on ALUA target port group change
target: Convert se_lun->lun_deve_lock to normal spinlock
target: use 'se_dev_entry' when allocating UAs
target: Remove 'ua_nacl' pointer from se_ua structure
target_core_alua: Correct UA handling when switching states
xen-scsiback: Fix compile warning for 64-bit LUN
target: Remove TARGET_MAX_LUNS_PER_TRANSPORT
target: use 64-bit LUNs
target: Drop duplicate + unused se_dev_check_wce
target: Drop unnecessary core_tpg_register TFO parameter
...
projects / karo-tx-linux.git / log