Thomas Abraham [Wed, 1 Dec 2010 12:42:48 +0000 (18:12 +0530)]
ARM: S5PV210: Add SROM controller clock
This patch adds the SROM controller clock to the list of clocks to be enabled at
boot time. It is required to be enabled at boot time since the modules connected
over the SROM interface such as the Ethernet controller need an operational SROM.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Thomas Abraham [Wed, 1 Dec 2010 12:32:30 +0000 (18:02 +0530)]
ARM: S5P: Add SROM bank 4 and 5 register offsets
Some of the S5P platforms like S5PC100 and S5PV210 include SROM banks
4 and 5 in addition to SROM banks 0 to 3. This patch adds register
offsets for SROM bank 4 and 5.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Thomas Abraham [Mon, 15 Nov 2010 00:24:49 +0000 (09:24 +0900)]
ARM: S5P: Add SROM control register shift macros for other banks.
This patch adds shift macros for the SROM Bus width and control
register to represent the shift count for the 5th and 6th SROM
banks. Some of the S5P SOCs have them.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Mon, 15 Nov 2010 00:18:57 +0000 (09:18 +0900)]
ARM: S5P: Move the SROM register definitions to plat-s5p
The SROM register difinitions of S5PV310/S5PC210 (mach/regs-srom.h)
can be used to other S5P SoCs such as S5PV210/S5PC110. So moved into
plat/regs-srom.h of plat-s5p directory.
Changhwan Youn [Fri, 3 Dec 2010 08:14:57 +0000 (17:14 +0900)]
ARM: SAMSUNG: Add support for Power Domain control
This patch implements Power Domain control based on Runtime PM framework.
Each Power Domain is represented by a Power Domain device and the devices
belong to these Power Domains should be set as a child device of the Power
Domain devices. The corresponding drivers of the devices should implement
Runtime PM to control the Power Domains.
Signed-off-by: Changhwan Youn <chaos.youn at samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Mark Brown [Fri, 3 Dec 2010 11:28:21 +0000 (20:28 +0900)]
ARM: SAMSUNG: Convert irq-vic-timer to irq_ functions
Conver the VIC timer interrupts to use the irq_ versions of the IRQ
operatiosn introduced in 2.6.37, storing the mask for the timer
interrupt in the chip_data of the irq_data in order to save having to
do a substraction and a shift on every operation.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Mark Brown [Fri, 3 Dec 2010 11:28:21 +0000 (20:28 +0900)]
ARM: SAMSUNG: Convert irq-uart to use new irq_ functions
Convert to the new irq_ versions of the IRQ operations. As well as
the textual substituion of irq_data for the raw IRQ number we also
convert the register base lookup to in s3c_irq_uart_base() to pick
the irq_data up directly.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Mark Brown [Thu, 2 Dec 2010 05:35:38 +0000 (14:35 +0900)]
ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methods
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Conver S3C64xx irq-eint to use this with a
simple textual substitution.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Mark Brown [Thu, 2 Dec 2010 05:35:38 +0000 (14:35 +0900)]
ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Begin converting Samsung platforms over to
these methods by converting s3c_irqext_wake() with a simple textual
substitution.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:59:57 +0000 (09:59 +0900)]
ARM: S5PV310: Enable I2S device on SMDKC210
Enable I2S_0 device on the SMDKC210.
Also, add the dependency I2C_1 device.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:59:05 +0000 (09:59 +0900)]
ARM: S5PV310: Enable I2S device on SMDKV310
Enable I2S_0 device on the SMDKV310.
Also, add the dependency I2C_1 device.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:57:46 +0000 (09:57 +0900)]
ARM: S5PV310: Add AC97 support for SMDK
Enable AC97 audio device on SMDKV310 and SMDKC210.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:57:03 +0000 (09:57 +0900)]
ARM: S5PV310: Define I2S clocks
Define missing controller clocks for the I2S-0, 1 and 2 blocks.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: Added description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:54:57 +0000 (09:54 +0900)]
ARM: S5PV310: Add AC97 clock
Define clock for the AC97 controller.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:54:35 +0000 (09:54 +0900)]
ARM: S5PV310: Add PDMA clocks
Define PDMA clocks for the controller 0 and 1.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:52:14 +0000 (09:52 +0900)]
ARM: S5PV310: Enable I2C1 device
Enable the I2C1 device on SMDKV310 and SMDKC210.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:48:37 +0000 (09:48 +0900)]
ARM: S5PV210: Enable I2S device to work on SMDKV210
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDKV210.
[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:48:35 +0000 (09:48 +0900)]
ARM: S5PV210: Enable I2S device to work on SMDKC110
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDKC110.
[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:48:32 +0000 (09:48 +0900)]
ARM: S5P6450: Enable I2S device to work on SMDK6450
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDK6450.
[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:46:29 +0000 (09:46 +0900)]
ARM: S5P6440: Enable I2S device to work on SMDK6440
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDK6440.
[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:44:39 +0000 (09:44 +0900)]
ARM: S5P6450: Define base addresses for I2S
Define the base address of I2S-1 and 2 for S5P6450.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: Added description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:44:36 +0000 (09:44 +0900)]
ARM: S5P6450: Define clocks for I2S
Define missing controller clocks for the I2S-0,1 blocks.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:44:30 +0000 (09:44 +0900)]
ARM: S5P6442: Enable I2C0 device on SMDK6442
This patch enables I2C0 device for WM8580 on SMDK6442.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title and description] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Jassi Brar [Tue, 21 Dec 2010 00:44:28 +0000 (09:44 +0900)]
ARM: S5P6442: Implement i2c-gpio config
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Linus Torvalds [Tue, 28 Dec 2010 23:54:24 +0000 (15:54 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ring_buffer: Off-by-one and duplicate events in ring_buffer_read_page
Linus Torvalds [Tue, 28 Dec 2010 23:53:54 +0000 (15:53 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/microcode: Fix double vfree() and remove redundant pointer checks before vfree()
Imre Kaloz [Mon, 27 Dec 2010 21:59:57 +0000 (22:59 +0100)]
ARM: fix IXP4xx build failure
arm: export dma_set_coherent_mask
While a regression was fixed with commit 710224fa2750cf (arm: fix
"arm: fix pci_set_consistent_dma_mask for dmabounce devices"), a
new one was introduced as dma_set_coherent_mask wasn't exported
for modules. This patch takes care for this issue.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ahmed S. Darwish [Sat, 25 Dec 2010 09:57:09 +0000 (11:57 +0200)]
RAMOOPS: Don't overflow over non-allocated regions
The current code mis-calculates the ramoops header size, leading to an
overflow over the next record at best, or over a non-allocated region at
worst. Fix that calculation.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 27 Dec 2010 18:36:27 +0000 (10:36 -0800)]
Merge branch 'nommu-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/nommu-2.6
* 'nommu-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/nommu-2.6:
nommu: Provide stubbed alloc/free_vm_area() implementation.
nommu: Fix up vmalloc_node() symbol export regression.
Linus Torvalds [Mon, 27 Dec 2010 18:33:30 +0000 (10:33 -0800)]
Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
fbdev: sh_mobile_lcdc: increase maximum framebuffer size to support 1080p
video: imxfb: Fix the maximum value for yres
fb: fix overlapping test off-by-one.
fbdev: sh-mobile: retrieve and propagate display sizes from EDID
fbdev: sh-mobile: restore display size configuration
fbdev: sh_mobile_lcdc: increase maximum framebuffer size to support 1080p
LCDC hardware can support 1920x1080 formats, adjust the driver to cover them.
Besides, instead of guessing some "reasonable" validity checks, only verify
values in .fb_check_var(), that we are sure, we cannot support.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Jesper Juhl [Sat, 25 Dec 2010 18:57:41 +0000 (19:57 +0100)]
x86/microcode: Fix double vfree() and remove redundant pointer checks before vfree()
In arch/x86/kernel/microcode_intel.c::generic_load_microcode()
we have this:
while (leftover) {
...
if (get_ucode_data(mc, ucode_ptr, mc_size) ||
microcode_sanity_check(mc) < 0) {
vfree(mc);
break;
}
...
}
if (mc)
vfree(mc);
This will cause a double free of 'mc'. This patch fixes that by
just removing the vfree() call in the loop since 'mc' will be
freed nicely just after we break out of the loop.
There's also a second change in the patch. I noticed a lot of
checks for pointers being NULL before passing them to vfree().
That's completely redundant since vfree() deals gracefully with
being passed a NULL pointer. Removing the redundant checks
yields a nice size decrease for the object file.
Size before the patch:
text data bss dec hex filename
4578 240 1032 5850 16da arch/x86/kernel/microcode_intel.o
Size after the patch:
text data bss dec hex filename
4489 240 984 5713 1651 arch/x86/kernel/microcode_intel.o
Jeff Garzik [Mon, 27 Dec 2010 00:42:15 +0000 (19:42 -0500)]
pata_cs5536: avoid implicit MSR API inclusion on x86-64
We don't need or want MSR usage here, on x86-64.
x86-64 was disabled intentionally in Kconfig, but commit 9272dcc232b84ccb027d6861077934055d42764d changed that.
drivers/ata/pata_cs5536.c:47:1: warning: "rdmsr" redefined
In file included from arch/x86/include/asm/irqflags.h:60,
from include/linux/irqflags.h:15,
from arch/x86/include/asm/system.h:11,
from arch/x86/include/asm/processor.h:17,
from include/linux/prefetch.h:14,
from include/linux/list.h:7,
from include/linux/module.h:9,
from drivers/ata/pata_cs5536.c:33:
arch/x86/include/asm/paravirt.h:146:1: warning: this is the location of the previous definition
drivers/ata/pata_cs5536.c:48:1: warning: "wrmsr" redefined
arch/x86/include/asm/paravirt.h:154:1: warning: this is the location of the previous definition
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
GPEs with corresponding _Lxx/_Exx control methods need to be disabled
during initialization in case they have been enabled by the BIOS, so
that they don't fire up until they are enabled by acpi_update_gpes().
References: https://bugzilla.kernel.org/show_bug.cgi?id=25412 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
ipv4: dont create routes on down devices
epic100: hamachi: yellowfin: Fix skb allocation size
sundance: Fix oopses with corrupted skb_shared_info
Revert "ipv4: Allow configuring subnets as local addresses"
USB: mcs7830: return negative if auto negotiate fails
irda: prevent integer underflow in IRLMP_ENUMDEVICES
tcp: fix listening_get_next()
atl1c: Do not use legacy PCI power management
mac80211: fix mesh forwarding
MAINTAINERS: email address change
net: Fix range checks in tcf_valid_offset().
net_sched: sch_sfq: fix allot handling
hostap: remove netif_stop_queue from init
mac80211/rt2x00: add ieee80211_tx_status_ni()
typhoon: memory corruption in typhoon_get_drvinfo()
net: Add USB PID for new MOSCHIP USB ethernet controller MCS7832 variant
net_sched: always clone skbs
ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed.
netlink: fix gcc -Wconversion compilation warning
asix: add USB ID for Logitec LAN-GTJ U2A
...
Eric Dumazet [Wed, 22 Dec 2010 04:39:39 +0000 (04:39 +0000)]
ipv4: dont create routes on down devices
In ip_route_output_slow(), instead of allowing a route to be created on
a not UPed device, report -ENETUNREACH immediately.
# ip tunnel add mode ipip remote 10.16.0.164 local
10.16.0.72 dev eth0
# (Note : tunl1 is down)
# ping -I tunl1 10.1.2.3
PING 10.1.2.3 (10.1.2.3) from 192.168.18.5 tunl1: 56(84) bytes of data.
(nothing)
# ./a.out tunl1
# ip tunnel del tunl1
Message from syslogd@shelby at Dec 22 10:12:08 ...
kernel: unregister_netdevice: waiting for tunl1 to become free.
Usage count = 3
After patch:
# ping -I tunl1 10.1.2.3
connect: Network is unreachable
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joel Soete reported oopses during pppoe over sundance NIC, caused by
a bug in skb allocation and dma mapping code, where skb_reserve()
bytes weren't taken into account. As a followup to the patch:
"sundance: Fix oopses with corrupted skb_shared_info" very similar
code is fixed here for three other drivers.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Cc: Joel Soete <soete.joel@scarlet.be> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jarek Poplawski [Sat, 25 Dec 2010 05:12:17 +0000 (05:12 +0000)]
sundance: Fix oopses with corrupted skb_shared_info
Joel Soete reported oopses at the beginning of pppoe connections since
v2.6.35. After debugging the bug was found in sundance skb allocation
and dma mapping code, where skb_reserve() bytes aren't taken into
account. This is an old bug, only uncovered by some change in 2.6.35.
Initial debugging patch by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Joel Soete <soete.joel@scarlet.be> Tested-by: Joel Soete <soete.joel@scarlet.be> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[media] v4l: soc-camera: fix multiple simultaneous user case
A recent patch has introduced a regression, whereby a second open of an
soc-camera video device breaks the running capture. This patch fixes this bug
by guaranteeing, that video buffers get initialised only during the first open
of the device node.
Linus Torvalds [Fri, 24 Dec 2010 21:00:37 +0000 (13:00 -0800)]
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
spi/mpc52xx-spi: fix annotation for remove()-pointer
spi/fsl_espi: fix wrong setting of the address in the command buffer
spi/fsl_espi: change the read behaviour of the SPIRF
of/i2c: Fix request module by alias
powerpc/mpc5200: include fs.h in mpc52xx_gpt.c
Linus Torvalds [Fri, 24 Dec 2010 21:00:16 +0000 (13:00 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: issue DIPM enable commands with LPM state updated
libata: no special completion processing for EH commands
pata_mpc52xx: driver needs BMDMA
pata_cs5536: Add support for non-X86_32 platforms
libata-sff: fix HSM_ST_ERR handling in __ata_sff_port_intr()
Linus Torvalds [Fri, 24 Dec 2010 20:59:09 +0000 (12:59 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: print out alloc information with KERN_DEBUG instead of KERN_INFO
kthread_work: make lockdep happy
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] fix up documentation for change in ->queuecommand to lockless calling
[SCSI] bfa: rename log_level to bfa_log_level
Tejun Heo [Thu, 9 Dec 2010 15:13:15 +0000 (16:13 +0100)]
libata: issue DIPM enable commands with LPM state updated
Low level drivers may behave differently depending on the current
link->lpm_policy. During ata_eh_set_lpm(), DIPM enable commands are
issued after the successful completion of ap->ops->set_lpm(), which
means that the controller is already in the target state. This causes
DIPM enable commands to be processed with mismatching controller power
state and link->lpm_policy value.
In ahci, link->lpm_policy is used to ignore certain PHY events if LPM
is enabled; however, as DIPM commands are issued with stale
link->lpm_policy, they sometimes end up triggering these conditions
and get aborted leading to LPM configuration failure.
Fix it by updating link->lpm_policy before issuing DIPM enable
commands.
Tejun Heo [Thu, 9 Dec 2010 14:59:32 +0000 (15:59 +0100)]
libata: no special completion processing for EH commands
ata_qc_complete() contains special handling for certain commands. For
example, it schedules EH for device revalidation after certain
configurations are changed. These shouldn't be applied to EH
commands but they were.
In most cases, it doesn't cause an actual problem because EH doesn't
issue any command which would trigger special handling; however, ACPI
can issue such commands via _GTF which can cause weird interactions.
Restructure ata_qc_complete() such that EH commands are always passed
on to __ata_qc_complete().
stable: Please apply to -stable only after 2.6.38 is released.
Wolfram Sang [Wed, 22 Dec 2010 15:50:10 +0000 (16:50 +0100)]
pata_mpc52xx: driver needs BMDMA
Found by this build-error if BMDMA is disabled:
drivers/ata/pata_mpc52xx.c: In function 'mpc52xx_ata_init_one':
drivers/ata/pata_mpc52xx.c:662: error: 'ata_bmdma_interrupt' undeclared (first use in this function)
...
Wu Zhangjin [Fri, 24 Dec 2010 13:39:08 +0000 (21:39 +0800)]
pata_cs5536: Add support for non-X86_32 platforms
pata_cs5536 does work on the other platforms(e.g. Loongson, a MIPS
variant), so, remove the dependency of X86_32 and fix the building
errors under the other platforms via only reserving the X86_32 specific
parts for X86_32.
pata_amd also supports cs5536 IDE controller, but this one saves about
33k for the compressed kernel image(vmlinuz for MIPS).
Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Chen Jie <chenj@lemote.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Fri, 3 Dec 2010 14:19:13 +0000 (15:19 +0100)]
libata-sff: fix HSM_ST_ERR handling in __ata_sff_port_intr()
While separating out BMDMA irq handler from SFF, commit c3b28894
(libata-sff: separate out BMDMA irq handler) incorrectly made
__ata_sff_port_intr() consider an IRQ to be an idle one if the host
state was transitioned to HSM_ST_ERR by ata_bmdma_port_intr().
This makes BMDMA drivers ignore IRQs reporting host bus error which
leads to timeouts instead of triggering EH immediately. Fix it by
making __ata_sff_port_intr() consider the IRQ to be an idle one iff
the state is HSM_ST_IDLE. This is equivalent to adding HSM_ST_ERR to
the "break"ing case but less error-prone.
Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Antonio Toma <antonio.toma@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Paul Mundt [Fri, 24 Dec 2010 10:38:37 +0000 (19:38 +0900)]
sh: intc: Initialize radix tree gfp mask explicitly.
Presently the root node is initialized by way of kzalloc on the parent
data structure, which by chance happens to do the bulk of what an
explicit initialization does with GFP_NOWAIT semantics. This however is
more by luck than by design, and as we ideally want to permit radix node
allocations access to the emergency pools anyways, add in the proper
initializer with the desired mask.
Mingkai Hu [Tue, 21 Dec 2010 01:26:07 +0000 (09:26 +0800)]
spi/fsl_espi: change the read behaviour of the SPIRF
The user must read N bytes of SPIRF (1 <= N <= 4) that do not exceed the
amount of data in the receive FIFO, so read the SPIRF byte by byte when
the data in receive FIFO is less than 4 bytes.
On Simics, when read N bytes that exceed the amount of data in receive
FIFO, we can't read the data out, that is we can't clear the rx FIFO,
then the CPU will loop on the espi rx interrupt.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
of_i2c_register_devices() will try to load a module called ds1337.ko.
There is no such module, so it will fail. If we look in modules.alias
we will find entries like these:
.
.
.
alias i2c:ds1339 rtc_ds1307
alias i2c:ds1338 rtc_ds1307
alias i2c:ds1337 rtc_ds1307
alias i2c:ds1307 rtc_ds1307
alias i2c:ds1374 rtc_ds1374
.
.
.
The module we want is really called rtc_ds1307.ko. If we request a
module called "i2c:ds1337", the userspace module loader will do the
right thing (unless it is busybox) and load rtc_ds1307.ko. So we add
the I2C_MODULE_PREFIX to the request_module() string.
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Paul Mundt [Fri, 24 Dec 2010 03:15:57 +0000 (12:15 +0900)]
sh: Fix up SH7201 clkfwk build.
The master clock initialization for SH7201 was wholly bogus. Users of the
legacy API must initialize the clock rate through the struct clk itself
rather than returning the clock frequency. Given that the init function
itself is void, returning the frequency isn't terribly effective.
Paul Mundt [Fri, 24 Dec 2010 03:08:30 +0000 (12:08 +0900)]
nommu: Provide stubbed alloc/free_vm_area() implementation.
Now that these have been introduced in to the vmalloc API, sync up the
nommu side of things. At present we don't deal with VMAs as such, so for
the time being these will simply BUG() out. In the future it should be
possible to support this interface by layering on top of the vm_regions.
Paul Mundt [Fri, 24 Dec 2010 02:30:10 +0000 (11:30 +0900)]
sh: mach-se: Fix up SE7206 build.
With some recent tidying of duplicate register definitions the se7206 IRQ
code broke:
arch/sh/boards/mach-se/7206/irq.c: error: 'INTC_ICR' undeclared (first use in this function)
arch/sh/boards/mach-se/7206/irq.c: error: (Each undeclared identifier is reported only once
arch/sh/boards/mach-se/7206/irq.c: error: for each function it appears in.)
Linus Torvalds [Fri, 24 Dec 2010 00:36:48 +0000 (16:36 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Fix system inodes cache overflow.
ocfs2: Hold ip_lock when set/clear flags for indexed dir.
ocfs2: Adjust masklog flag values
Ocfs2: Teach 'coherency=full' O_DIRECT writes to correctly up_read i_alloc_sem.
ocfs2/dlm: Migrate lockres with no locks if it has a reference
Linus Torvalds [Fri, 24 Dec 2010 00:04:32 +0000 (16:04 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Fix GPIO2-fixup for Sony laptops
ALSA: hda - Try to find an empty control index when it's occupied
ALSA: hda - Fix conflict of d-mic capture volume controls
ALSA: hda - Don't apply ALC269-specific initialization to ALC275
ALSA: hda - Add fix-up for Sony VAIO with ALC275 codecs
ALSA: pcm: remember to always call va_end() on stuff that we va_start()
ALSA: HDA: Add auto-mute for Thinkpad SL410/SL510
Linus Torvalds [Thu, 23 Dec 2010 23:59:23 +0000 (15:59 -0800)]
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (21 commits)
[media] mceusb: set a default rx timeout
[media] mceusb: fix inverted mask inversion logic
[media] mceusb: add another Fintek device ID
[media] lirc_dev: fixes in lirc_dev_fop_read()
[media] lirc_dev: stray unlock in lirc_dev_fop_poll()
[media] rc: fix sysfs entry for mceusb and streamzap
[media] streamzap: merge timeout space with trailing space
[media] mceusb: fix keybouce issue after parser simplification
[media] IR: add tv power scancode to rc6 mce keymap
[media] mceusb: buffer parsing fixups for 1st-gen device
[media] mceusb: fix up reporting of trailing space
[media] nuvoton-cir: improve buffer parsing responsiveness
[media] mceusb: add support for Conexant Hybrid TV RDU253S
[media] s5p-fimc: Fix output DMA handling in S5PV310 IP revisions
[media] s5p-fimc: Use correct fourcc code for 32-bit RGB format
[media] s5p-fimc: Convert m2m driver to unlocked_ioctl
[media] s5p-fimc: Explicitly add required header file
[media] s5p-fimc: Fix vidioc_g_crop/cropcap on camera sensor
[media] s5p-fimc: BKL lock removal - compilation fix
[media] soc-camera: fix static build of the sh_mobile_csi2.c driver
...
Linus Torvalds [Thu, 23 Dec 2010 23:39:40 +0000 (15:39 -0800)]
Merge branches 'perf-fixes-for-linus' and 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf probe: Fix to support libdwfl older than 0.148
perf tools: Fix lazy wildcard matching
perf buildid-list: Fix error return for success
perf buildid-cache: Fix symbolic link handling
perf symbols: Stop using vmlinux files with no symbols
perf probe: Fix use of kernel image path given by 'k' option
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, kexec: Limit the crashkernel address appropriately
David Howells [Wed, 22 Dec 2010 16:24:13 +0000 (16:24 +0000)]
KEYS: Don't call up_write() if __key_link_begin() returns an error
In construct_alloc_key(), up_write() is called in the error path if
__key_link_begin() fails, but this is incorrect as __key_link_begin() only
returns with the nominated keyring locked if it returns successfully.
Without this patch, you might see the following in dmesg:
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
mount.cifs/5769 is trying to release lock (&key->sem) at:
[<ffffffff81201159>] request_key_and_link+0x263/0x3fc
but there are no more locks to release!
other info that might help us debug this:
3 locks held by mount.cifs/5769:
#0: (&type->s_umount_key#41/1){+.+.+.}, at: [<ffffffff81131321>] sget+0x278/0x3e7
#1: (&ret_buf->session_mutex){+.+.+.}, at: [<ffffffffa0258e59>] cifs_get_smb_ses+0x35a/0x443 [cifs]
#2: (root_key_user.cons_lock){+.+.+.}, at: [<ffffffff81201000>] request_key_and_link+0x10a/0x3fc
Andres Salomon [Tue, 21 Dec 2010 21:04:52 +0000 (13:04 -0800)]
cs5535-gpio: handle GPIO regs where higher (clear) bits are set
The default for non-READ_BACK GPIO regs is to have the clear bits set;
this means that our original errata fix was too simplistic. This
changes it to the following behavior:
- when setting GPIOs, ignore the higher order bits (they're for
clearing, we don't need to care about them).
- when clearing GPIOs, keep all the bits, but unset (via XOR) the
lower order bit that negates the clear bit that we care about. That
is, if we're clearing GPIO 26 (val = 0x04000000), we first XOR what's
currently in the register with 0x0400 (GPIO 26's SET bit), and then
OR that with the GPIO 26's CLEAR bit.
Tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andres Salomon [Tue, 21 Dec 2010 21:04:42 +0000 (13:04 -0800)]
cs5535-gpio: don't apply errata #36 to edge detect GPIOs
The edge detect status GPIOs function differently from the other atomic
model CS5536 GPIO registers; writing 1 to the high bits clears the GPIO,
but writing 1 to the lower bits also clears the bit.
This means that read-modify-write doesn't actually work for it, so don't
apply the errata here. If a negative edge status gets lost after
resume.. well, we tried our best!
Tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PCI hotplug: Fix unexpected driver unregister in pciehp_acpi.c
If pcie_ports_disabled is set, pcie_port_service_register() returns
error code and select_detection_mode() should not attempt to
unregister dummy_driver and use dummy_slots. It should return
PCIEHP_DETECT_ACPI immediately instead.
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
As reported by Ben Greear, this causes regressions:
> Change 4465b469008bc03b98a1b8df4e9ae501b6c69d4b caused rules
> to stop matching the input device properly because the
> FLOWI_FLAG_MATCH_ANY_IIF is always defined in ip_dev_find().
>
> This breaks rules such as:
>
> ip rule add pref 512 lookup local
> ip rule del pref 0 lookup local
> ip link set eth2 up
> ip -4 addr add 172.16.0.102/24 broadcast 172.16.0.255 dev eth2
> ip rule add to 172.16.0.102 iif eth2 lookup local pref 10
> ip rule add iif eth2 lookup 10001 pref 20
> ip route add 172.16.0.0/24 dev eth2 table 10001
> ip route add unreachable 0/0 table 10001
>
> If you had a second interface 'eth0' that was on a different
> subnet, pinging a system on that interface would fail:
>
> [root@ct503-60 ~]# ping 192.168.100.1
> connect: Invalid argument
Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Theodore Ts'o [Tue, 21 Dec 2010 03:30:36 +0000 (22:30 -0500)]
ext4: fix on-line resizing regression
https://bugzilla.kernel.org/show_bug.cgi?id=25352
This regression was caused by commit a31437b85: "ext4: use
sb_issue_zeroout in setup_new_group_blocks", by accidentally dropping
the code which reserved the block group descriptor and inode table
blocks.
Wolfram Sang [Wed, 22 Dec 2010 15:42:55 +0000 (16:42 +0100)]
powerpc/mpc5200: include fs.h in mpc52xx_gpt.c
Fix build errors like these (from a randconfig and my defconfig for a custom board):
src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:549: error: dereferencing pointer to incomplete type: 1 errors in 1 logs
src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:636: error: implicit declaration of function 'nonseekable_open': 1 errors in 1 logs
src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:657: error: variable 'mpc52xx_wdt_fops' has initializer but incomplete type: 1 errors in 1 logs
src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:658: error: excess elements in struct initializer: 1 errors in 1 logs
src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:658: error: unknown field 'owner' specified in initializer: 1 errors in 1 logs
...
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Dan Carpenter [Fri, 17 Dec 2010 03:25:43 +0000 (03:25 +0000)]
USB: mcs7830: return negative if auto negotiate fails
The original code returns 0 on success and 1 on failure. In fact, at
this point, "ret" is already either zero or a negative error code so
we can just return it directly.
Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Rosenberg [Wed, 22 Dec 2010 13:58:27 +0000 (13:58 +0000)]
irda: prevent integer underflow in IRLMP_ENUMDEVICES
If the user-provided len is less than the expected offset, the
IRLMP_ENUMDEVICES getsockopt will do a copy_to_user() with a very large
size value. While this isn't be a security issue on x86 because it will
get caught by the access_ok() check, it may leak large amounts of kernel
heap on other architectures. In any event, this patch fixes it.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 23 Dec 2010 17:32:46 +0000 (09:32 -0800)]
tcp: fix listening_get_next()
Alexey Vlasov found /proc/net/tcp could sometime loop and display
millions of sockets in LISTEN state.
In 2.6.29, when we converted TCP hash tables to RCU, we left two
sk_next() calls in listening_get_next().
We must instead use sk_nulls_next() to properly detect an end of chain.
Reported-by: Alexey Vlasov <renton@renton.name> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Sharp [Thu, 23 Dec 2010 00:38:24 +0000 (16:38 -0800)]
ring_buffer: Off-by-one and duplicate events in ring_buffer_read_page
Fix two related problems in the event-copying loop of
ring_buffer_read_page.
The loop condition for copying events is off-by-one.
"len" is the remaining space in the caller-supplied page.
"size" is the size of the next event (or two events).
If len == size, then there is just enough space for the next event.
size was set to rb_event_ts_length, which may include the size of two
events if the first event is a time-extend, in order to assure time-
extends are kept together with the event after it. However,
rb_advance_reader always advances by one event. This would result in the
event after any time-extend being duplicated. Instead, get the size of
a single event for the memcpy, but use rb_event_ts_length for the loop
condition.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1293064704-8101-1-git-send-email-dhsharp@google.com>
LKML-Reference: <AANLkTin7nLrRPc9qGjdjHbeVDDWiJjAiYyb-L=gH85bx@mail.gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Takashi Iwai [Thu, 23 Dec 2010 15:35:34 +0000 (16:35 +0100)]
ALSA: hda - Fix GPIO2-fixup for Sony laptops
The fix-up entries by the commit 2785591a9760c677a7ee6f541e751c23086f5bfd
ALSA: hda - Add fix-up for Sony VAIO with ALC275 codecs
weren't applied in the right position. They had to be before the quirk
entry matching to all Sony devices.
Takashi Iwai [Thu, 23 Dec 2010 09:17:52 +0000 (10:17 +0100)]
ALSA: hda - Try to find an empty control index when it's occupied
When a mixer control element was already created with the given name,
try to find another index for avoiding conflicts, instead of breaking
with an error. This makes the driver more robust.
Takashi Iwai [Thu, 23 Dec 2010 09:16:05 +0000 (10:16 +0100)]
ALSA: hda - Fix conflict of d-mic capture volume controls
When the d-mics are assigned to the same purpose of another analog mic
pins, the driver doesn't compute the index properly, resulting in an
error with "existing control". This patch fixes it.
Linus Torvalds [Thu, 23 Dec 2010 03:47:37 +0000 (19:47 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm: Include the connector name in the output_poll_execute() debug message
drm/radeon/kms: fix bug in r600_gpu_is_lockup
drm/radeon/kms: reorder display resume to avoid problems
drm/radeon/kms/evergreen: reset the grbm blocks at resume and init
drm/radeon/kms: fix evergreen asic reset
Revert "drm: Don't try and disable an encoder that was never enabled"
drm/radeon: Add early unregister of firmware fb's
drm/radeon: use aperture size not vram size for overlap tests
drm/radeon/kms/evergreen: flush hdp cache when flushing gart tlb
drm/radeon/kms: disable the r600 cb offset checker for linear surfaces
drm/radeon/kms: disable ss fixed ref divide
drm/i915/bios: Reverse order of 100/120 Mhz SSC clocks
agp/intel: Fix missed cached memory flags setting in i965_write_entry()
drm/i915/sdvo: Only use the SDVO pin if it is in the valid range
drm/i915/ringbuffer: Handle wrapping of the autoreported HEAD
drm/i915/dp: Fix I2C/EDID handling with active DisplayPort to DVI converter
projects / mv-sheeva.git / log