Takashi Iwai [Mon, 28 Oct 2013 10:24:23 +0000 (11:24 +0100)]
ALSA: 6fire: Fix probe of multiple cards
The probe code of snd-usb-6fire driver overrides the devices[] pointer
wrongly without checking whether it's already occupied or not. This
would screw up the device disconnection later.
Takashi Iwai [Fri, 25 Oct 2013 22:33:58 +0000 (00:33 +0200)]
ALSA: hda - Sync EAPD with vmaster on AD1984A Thinkpads
As EAPD on NID 0x12 (speaker pin) is used as the master amp on
Thinkpads with AD1984A codec, we can hook this to vmaster for saving a
bit more power at master mute state.
Takashi Iwai [Fri, 25 Oct 2013 22:24:14 +0000 (00:24 +0200)]
ALSA: hda - Fix silent headphone on Thinkpads with AD1984A codec
AD1984A codec has a couple of pins with EAPD controls, and the generic
codec driver tries to turn each of them on/off depending on the pin
active state. However, Thinkpads seem to use EAPD of the speaker pin
as a master EAPD for controlling the mute of all outputs, including
the headphone. This results in the dead headphone output via the
headphone plugging because it mutes the speaker and turns off EAPD.
The fix is to simply add spec->gen.keep_on_eapd flag.
[This is a regression fix on 3.12 where we moved the AD codec parser
to the generic parser. 3.11 and earlier didn't show this problem
because still static quirks have been used.]
The generic parser has a support of vmaster hook, but this is
initialized only in the init callback with the check of the presence
of the corresponding kctl. However, since kctl is NULL at the very
first init callback that is called before build_controls callback, the
vmaster hook sync is skipped there. Eventually this leads to the
uninitialized state depending on the hook implementation.
This patch adds a simple workaround, just calling the sync function
explicitly at build_controls callback.
Takashi Iwai [Fri, 25 Oct 2013 09:43:47 +0000 (11:43 +0200)]
Merge tag 'asoc-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.13
- Further work on the dmaengine helpers, including support for
configuring the parameters for DMA by reading the capabilities of the
DMA controller which removes some guesswork and magic numbers fromm
drivers.
- A refresh of the documentation.
- Conversions of many drivers to direct regmap API usage in order to
allow the ASoC level register I/O code to be removed, this will
hopefully be completed by v3.14.
- Support for using async register I/O in DAPM, reducing the time taken
to implement power transitions on systems that support it.
Anssi Hannula [Thu, 24 Oct 2013 22:45:18 +0000 (01:45 +0300)]
ALSA: hda - hdmi: Re-setup pin and infoframe on plug-in on all codecs
hdmi_setup_audio_infoframe() does not set up pin and infoframe if there
is no connected sink. If a sink is connected while audio playback is
already in progress, the pin and infoframe will not be properly set up,
causing no audio or wrongly mapped audio.
On Intel Haswell codecs the hdmi_setup_audio_infoframe() is already
called again from hdmi_present_sense() when an ELD appears because
transcoder:port mapping may have changed.
Make the call non-Haswell-specific so that audio will be properly set up
if the playback was started before a sink was connected.
Tested on non-Haswell Intel HDMI codec by plugging sink in during
playback.
Anssi Hannula [Thu, 24 Oct 2013 18:10:38 +0000 (21:10 +0300)]
ALSA: hda - hdmi: Disable ramp-up/down for non-PCM on AMD codecs
Recent AMD HDMI codecs (revision ID 3 and later, 0x100300 as reported by
procfs codec#0) have a configurable ramp-up/down functionality.
The documentation ( http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf )
specifies that 180 ("180/256 =~ 0.7") is recommended for PCM and 0 for
non-PCM.
Apply the recommended values according to provided S/PDIF AES0 settings
since ramp-up/down does not make sense for non-PCM.
v2: adapted to hdmi_ops infrastructure
* More note from Anssi:
actually, re-reading mails reveals that Olivier didn't find the
expected difference with this setting, except for "maybe slightly
slower startup with AES0=6" (i.e. value 0, which is unexpected).
So maybe
a) it makes too unnoticiable a difference, or
b) only affects certain hardware (card and/or sink), or
c) ramp-up/down is only triggered with the MUTE bit of
ATI_VERB_SET_MULTICHANNEL_xx which is also rev3+ specific,
but is not presently used by the driver,
or something else.
So there's a significant chance setting ramp rate is useless for us ATM,
but probably does not do actual harm either.
Anssi Hannula [Thu, 24 Oct 2013 18:10:37 +0000 (21:10 +0300)]
ALSA: hda - hdmi: Add HBR bitstreaming support for ATI/AMD HDMI codecs
ATI/AMD HDMI codecs do not include standard HDA HDMI HBR support (which
is required for bitstreaming DTS-HD and Dolby TrueHD), instead they have
custom verbs for checking and enabling it.
Add support for the ATI/AMD HDMI HBR verbs.
The specification is available at:
http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf
Anssi Hannula [Thu, 24 Oct 2013 18:10:36 +0000 (21:10 +0300)]
ALSA: hda - hdmi: Add ELD emulation for ATI/AMD codecs
ATI/AMD HDMI/DP codecs do not include standard HDA ELD (EDID-like data)
support.
In place of providing access to an ELD buffer, various vendor-specific
verbs are provided to provide the relevant information. Revision ID 3
and later (0x100300 as reported by procfs codec#X) have support for
providing more information than the previous revisions (but only if
supported by the display driver).
Generate ELD from the information provided by the vendor-specific verbs
on ATI/AMD codecs.
The specification is available at:
http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf
v2: moved code to hda_eld.c and cleaned it up
v3: adapted to hdmi_ops infrastructure
Anssi Hannula [Thu, 24 Oct 2013 18:10:35 +0000 (21:10 +0300)]
ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support
ATI/AMD codecs do not support all the standard HDA HDMI/DP functions,
instead various vendor-specific verbs are provided.
This commit addresses these missing functions:
- standard channel mapping support
- standard infoframe configuration support
ATI/AMD provides their own verbs that allow the following:
- setting CA for infoframe
- setting down-mix information for infoframe
- channel pair remapping
- individual channel remapping (revision ID 3+, 0x100300+)
The documentation for the verbs has now been released by AMD:
http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf
Add support for the ATI/AMD specific verbs and use them instead of the
generic methods on ATI/AMD codecs. This allows multi-channel PCM audio
to work.
Channel remapping is restricted to pairwise mapping on codecs with
revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This
means cards up to Radeon HD7670 as far as I know. This will not affect
standard multi-channel modes since these codecs support automatic
FC-LFE swapping for HDMI.
ATI/AMD codecs do not advertise all of their supported rates, formats
and channel counts, therefore that information is forced accordingly so
that all HDMI 1.x PCM parameters are marked as supported.
Support for multiple ports is also added to patch_atihdmi so that
0x1002aa01 codecs with multiple ports will work properly when switched
back to that patch.
v2: splitted ELD emulation to a separate patch, tlv fixes
v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id
Anssi Hannula [Thu, 24 Oct 2013 18:10:34 +0000 (21:10 +0300)]
ALSA: hda - hdmi: Allow HDA patches to customize more operations
Upcoming AMD multichannel support requires many customized operations
(channel mapping, ELD, HBR) but can otherwise share most of its code
with the generic patch.
Add a local struct hdmi_ops containing customizable HDMI-specific
callbacks and move the current code to those callbacks. Functionality is
unaltered.
Vinod Koul [Thu, 24 Oct 2013 11:07:31 +0000 (16:37 +0530)]
ALSA: compress: fix drain calls blocking other compress functions
The drain and drain_notify callback were blocked by low level driver untill the
draining was complete. Due to this being invoked with big fat mutex held, others
ops like reading timestamp, calling pause, drop were blocked.
So to fix this we add a new snd_compr_drain_notify() API. This would be required
to be invoked by low level driver when drain or partial drain has been completed
by the DSP. Thus we make the drain and partial_drain callback as non blocking
and driver returns immediately after notifying DSP.
The waiting is done while relasing the lock so that other ops can go ahead.
Takashi Iwai [Thu, 24 Oct 2013 12:25:32 +0000 (14:25 +0200)]
ALSA: Add ifdef CONFIG_GENERIC_ALLOCATOR for SNDRV_DMA_TYPE_IRAM code
It turned out that we can't use gen_pool_*() functions on archs
without CONFIG_GENERIC_ALLOCATOR (resulting in missing symbols), since
linux/genalloc.h doesn't provide dummy functions for all. We'd be
able to fix linux/genalloc.h size, but I take an easier path for
now...
Mark Brown [Sat, 19 Oct 2013 20:38:26 +0000 (21:38 +0100)]
ASoC: dmaengine: Use filter_data rather than dma_data for compat requests
When using the legacy filter function channel requests we currently pass
the audio specific struct snd_dmaengine_dai_dma_data which isn't likely to
be helpful for actual filtering. Since there's already a field in the
structure called filter_data clearly intended for use here convert the
driver to use that.
All existing users of plain filter functions have been converted to use
an explicit compat function to override this behaviour except i.MX which
is working around this issue in its filter function and is updated to
just use filter_data directly here.
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Takashi Iwai [Wed, 23 Oct 2013 23:24:15 +0000 (01:24 +0200)]
ALSA: hda - Fix mute LED on HP laptops in runtime suspend
When HP laptops with mute and mic-record LEDs go to runtime suspend,
these LEDs are turned on forcibly no matter whether GPIO pis are on or
off. This strange behavior seems triggered by resetting the HD-audio
bus link at azx_rutime_suspend(). So, just add a new hda_bus flag to
avoid the link reset at runtime suspend and set it for these HP
machines.
Mark Brown [Sat, 19 Oct 2013 16:43:51 +0000 (17:43 +0100)]
ASoC: dmaengine: Support custom channel names
Some devices have more than just simple TX and RX DMA channels, for example
modern Samsung I2S IPs support a secondary transmit DMA stream which is
mixed into the primary stream during playback. Allow such devices to
specify the names of the channels to be requested in their dma_data.
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Takashi Iwai [Wed, 23 Oct 2013 23:20:24 +0000 (01:20 +0200)]
ALSA: hda - Fix unbalanced runtime PM refcount after S3/S4
When a machine goes to S3/S4 after power-save is enabled, the runtime
PM refcount might be incorrectly decreased because the power-down
triggered soon after resume assumes that the controller was already
powered up, and issues the pm_notify down.
This patch fixes the incorrect pm_notify call simply by checking the
current value properly.
Nicolin Chen [Wed, 23 Oct 2013 03:47:43 +0000 (11:47 +0800)]
ALSA: Add SoC on-chip internal ram support for DMA buffer allocation
Now it's quite common that an SoC contains its on-chip internal RAM.
By using this RAM space for DMA buffer during audio playback/record,
we can shutdown the voltage for external RAM to save power.
So add new DEV type with iram malloc()/free() and accordingly modify
current default mmap() for the iram circumstance.
Hebbar, Gururaja [Wed, 23 Oct 2013 12:30:14 +0000 (15:30 +0300)]
ASoC: davinci-evm: Add device tree binding
Device tree support for Davinci Machine driver
When the board boots with device tree, the driver will receive card,
codec, dai interface details (like the card name, DAPM routing map,
phandle for the audio components described in the dts file, codec mclk
speed). The card will be set up based on this information. Since the
routing is provided via DT we can mark the card fully routed so core
can take care of disconnecting the unused pins.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Mark Brown [Sat, 19 Oct 2013 13:13:04 +0000 (14:13 +0100)]
ASoC: ep93xx: Open code dma channel request
Currently the ep93xx DMA code is one of the few users relying on the fact
that the compat code uses the dma_data as the filter data for non-DT
channel requests. Since the rest of the core expects this to be a struct
snd_dmaengine_dai_data this isn't terribly helpful this will be changed to
use the already existing filter data so avoid breaking ep93xx by open
coding the current behaviour.
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
The serial-dir array gives this information so there is no need to have the
num-serializer property in DT description.
Just ignore the property in the driver the DTS files can be updated
separately without regression.
Update the documentation at the same time for davinci-mcasp
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Jyri Sarha [Fri, 18 Oct 2013 15:37:45 +0000 (18:37 +0300)]
ASoC: davinci-mcasp: Improve DT bindings document
Makes interrupts property optional as the interrupts are not currently
used by the driver and adds interrupt-names property to name listed
interrupts. Currently know interrupt names are "tx" and "rx".
- Improve tdm-slots propery description
- Improve op-mode property description
- Add pinctrl-names and pinctrl-0 properties
- Remove #address-cells and #size-cells as they are not needed.
- Bracket named interrupts property tuples for uniformity.
- Add missing "for" to serial-dir prop in DT bindings doc.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Jyri Sarha [Fri, 18 Oct 2013 15:37:43 +0000 (18:37 +0300)]
ASoC: davinci-mcasp: Extract DMA channels directly from DT
Extract DMA channels directly from DT as they can not be found from
platform resources anymore. This is a work-around until davinci audio
driver is updated to use dmaengine.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Jyri Sarha [Fri, 18 Oct 2013 15:37:42 +0000 (18:37 +0300)]
ASoC: davinci-mcasp: Add location for data port registers to DT
This patch adds a separate register location for data port registers to
mcasp DT bindings. On am33xx SoCs the McASP registers are mapped
trough L4 interconnect, but data port registers are also mapped trough
L3 bus to a different memory location.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Vinod Koul [Mon, 21 Oct 2013 13:37:34 +0000 (19:07 +0530)]
ASoC: dont call dapm_sync while reporting jack always
While reporting the jack status snd_soc_jack_report() invokes snd_soc_dapm_sync()
always. This should be required when we have pins associated with jack and
reporting enables or disables these.
So add a check for this case
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Mark Brown [Sun, 20 Oct 2013 17:14:20 +0000 (18:14 +0100)]
ASoC: si476x: Fix locking of core
The conversion of the si476x to regmap removed locking of the core during
register updates, allowing things like power state changes for the MFD to
happen during a register update. Avoid this by taking the core lock in the
DAI operations (which are the only things that do register updates) as we
used to do in the open coded register I/O functions.
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Clemens Ladisch [Tue, 15 Oct 2013 18:26:05 +0000 (20:26 +0200)]
ALSA: dice: restrict the driver to playback-only devices
At the moment, this driver supports only playback, while FFADO supports
(only) full-duplex devices. So, prevent conflicts by not claiming
devices that would be better handled by FFADO.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
projects / linux-beck.git / log