Staging: batman-adv: Remove dead max addr and obsolete VIS_FORMAT strings

Max address is not being used anywhere and just misleading, therefore
removing it. VIS_FORMAT string is now obsolete, so also remove it.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: remove the beta from main.h for release

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Update copyright years

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Fix aggregation direct-link bug

So far, neighbour's secondary interface OGMs can involuntarily
piggyback on primary interface OGMs that arrived on the same secondary
interface before. Secondary interface OGMs should NEVER leave their
direct neighbour broadcast domain! This patch ensures that secondary
interface OGMs can only be aggregated to other secondary interface OGMs.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: fix aggregation timing bug

batman-adv aggregates routing packets to reduce the number of packets in
the air. Every outgoing packet is compared with other packets in the
buffer to determine whether it can be aggregated or not. Packets sent
at a lower interval can be held back longer to maximize the aggregation.
Due to insufficient checking batman-adv held back all packets for a
certain time depending on its own lowest interval rate which slowed
down all other nodes.

Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Clone shared bat packets before modifying them

"tcpdump" and "batctl td" will receive packets with a wrong sequence
number on systems with a different endianess than network byte order.
This happens due to the reordering of bytes in the function which
handles aggregated bat packets. The function which receives the bat
packets must ensure that these buffers aren't shared with anything else
before that function tries to write into it. Otherwise it has to copy
the buffers so it is save again to change them.

Reported-by: Kevin Steen <batman@kevinsteen.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: only modify hna-table on active module

If we haven't set the module to MODULE_ACTIVE state before (in general,
no interface has yet been added to batman-adv) then the hna table is not
initialised yet. If the kernel changes the mac address of the bat0
interface at this moment then an hna_local_add() called by interface_set_mac_addr()
then resulted in a null pointer derefernce. With this patch we are now
explicitly checking before if the state is MODULE_ACTIVE right now so
that we can assume having an initialised hna table.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: add device ID of MelCo.,Inc. WLI-UC-G301N

My wireless LAN module 'MelCo.,Inc. WLI-UC-G301N' works fine,
if the following line is added into 2870_main_dev.c.

Signed-off-by: Nobhiro KUSUNO <n-kusuno@fc4.so-net.ne.jp>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rar_register: depends on PCI

rar_register driver uses PCI interfaces and PCI devices, so it
should depend on PCI.

Also format the Kconfig help text as normally done.

drivers/staging/rar_register/rar_register.c:623: error: implicit declaration of function 'pci_dev_get'
drivers/staging/rar_register/rar_register.c:623: warning: assignment makes pointer from integer without a cast

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Fixed long line lengths in comedi.h

This patches fixes some of the long line lengths that checkpatch.pl was
complaining about in comedi.h

Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Fixed long line length in comedidev.h

This patch fixes a long line length in comedidev.h to make checkpatch.pl happy

Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Fixed printk call lengths and log levels

This is a patch to include log levels and fix some over length lines in
printk calls in drivers.c

Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: crystalhd: fix missing semicolon

A semicolon is missing at the end of a statement, but it does compile
fine without it as the macro BCMLOG_ERR expands to a do {...} while (0);

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: netwave: delete the driver

It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore.  So, it is now deleted as scheduled, and documented in the TODO
file.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wavelan: delete the driver

It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore.  So, it is now deleted as scheduled, and documented in the TODO
file.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: strip: delete the driver

It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore.  So, it is now deleted as scheduled, and documented in the TODO
file.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: arlan: delete the driver

It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore.  So, it is now deleted as scheduled, and documented in the TODO
file.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename VersionInfo.h to version_info.h

The great renaming of the hv code is now complete.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename VmbusPacketFormat.h to vmbus_packet_format.h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename VmbusChannelInterface.h to vmbus_channel_interface.h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename VmbusPrivate.h to vmbus_private.h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename VmbusApi.h to vmbus_api.h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename StorVscApi.h to storvsc_api.h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename NetVscApi.h to netvsc_api.h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename ChannelInterface.c and .h to channel_interface.c and .h

All of the uppercase .c files are now gone.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename ChannelMgmt.c and .h to channel_mgmt.c and .h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename RndisFilter.c and .h to rndis_filter.c and .h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename StorVsc.c to storvsc.c

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename NetVsc.c and .h to netvsc.c and .h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename Vmbus.c to vmbus.c

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename BlkVsc.c to blkvsc.c

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename RingBuffer.c and .h to ring_buffer.c and .h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename Connection.c to connection.c

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename Channel.c and .h to channel.c and .h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename Hv.h to hv.h

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename Hv.c to hv.c

No CamelCase in file names.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: rename hyperv_utils.c to hv_utils.c

As the module only has one .c file in it, just name the file
the same as the desired module.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: util.h: fix up space mess again

Again, use tabs, not spaces, it's not difficult to remember...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove typedef that was just added.

It's a u64, so use a u64, it's not some special typedef.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Add Time Sync feature to hv_utils module.

The Time Sync feature synchronizes guest time to host UTC time after reboot,
and restore from saved/paused state.

Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Channel.c: fix up compiler warning

In the series of ASSERT removals, somehow we ended up with a compiler
warning in Channel.c.  This patch fixes that up.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT in logging.h

ASSERT is no longer used in hv, so remove the define

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT() and return -EINVAL in NetVsc.c

return -EINVAL instead of calling ASSERT()

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: replace ASSERT() with WARN_ON() in NetVsc.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in vmbus_drv.c

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s and return -EINVAL in RingBuffer.c

return -EINVAL instead of calling ASSERT() for these conditionals.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: check return value of RingBufferInit()

RingBufferInit() would always return sucess and instead relied on an
ASSERT() to test for an error condition.  Remove the ASSERT() and
return -EINVAL instead.  The return value of RingBufferInit() was also
never checked, so check it.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in RingBuffer.c

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in RndisFilter.c

return -EINVAL instead of calling ASSERT() for these conditionals.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in RndisFilter.c

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in StorVsc.c

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in blkvsc_drv.c

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: make the block driver depend on LBDAF

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: return error instead calling ASSERT in blkvsc_drv.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in storvsc_drv.c

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: remove ASSERT()s in Channel.c

These ASSERT()s serve no purpose other than for debugging.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: return -EINVAL instead of calling ASSERT()

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove ASSERT() in Channel.c

VmbusChannelOpen() will now return -EINVAL if UserDataLen is too big.
Previously this was handled by an assert.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: test return value of VmbusChannelEstablishGpadl()

The return value of VmbusChannelEstablishGpadl() was not examined in
Channel.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove ASSERT() in Channel.c

return an error instead of calling ASSERT() if VmbusPostMessage()
fails.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove ASSERT() in Channel.c

check memory allocation in VmbusChannelCreateGpadlHeader() and
return -ENOMEM if it fails

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove ASSERT()s in Channel.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: test return value of osd_WaitEventCreate()

The return value of osd_WaitEventCreate() was not examined in some
places.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: return correct error values in Connection.c

Also check the kzalloc call return value.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: check return value of osd_PageAlloc()

The return value of osd_PageAlloc() was checked using an ASSERT().
Change that to more useful behaviour.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove ASSERT()s in ChannelMgt.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Remove check for NULL before calling kfree()

kfree() knows how to deal with NULL, so there's no reason to check for
NULL before passing something to it.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155v4l: fix some sparse warnings

Mostly some __iomem markings and some static functions as well.

Cc: Marin Mitov <mitov@issp.bas.bg
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155v4l: Adding the missing linux/delay.h

The prototypes of udelay() and msleep() are in linux/delay.h,
so include it.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: code cleanup, resolved sparse finding

Cleared sparse warning 'Using plain integer as NULL pointer'

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: code cleanup, removed OUT definition

Remoted empty OUT define in ttype.h and its usage across the code.

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: removed SUCCESS define as it is not used

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: arlan: fixed unnecessary whitespace style issue in arlan-main.c

This is a patch to the arlan-main.c file that fixes the unnecessary whitespace
issues found by the checkpatch.pl tool.

Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cxt1e1: fix up one remaining THIS_MODULE usage

Copied from original Patch by Randy Dunlap

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: Check kmalloc return value before use the buffer in ieee80211_softmac.c

Check kmalloc return value before use the buffer.

Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: cb_pcidas64: fix up build warnings

Now that the 8255.h file is being included properly, we were
using the incorrect function prototypes, which causes a build
warning now.  This fixes it up and preserves the __iomem markings that
sparse wants to see.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: 8255: fix up previous static markings.

Ian pointed out that exported symbols should not be marked as static :)

Fixed this up by properly including the 8255.h file, and fixing
the function prototypes there, as the CONFIG variables were not getting
set so users of the header file were seeing the incorrect function
prototypes.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: line6: driver: fix up sparse warnings

minor stuff.

Cc: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: industrialio-trigger.c: minor fixups

We needed to include a header file that declared the functions that are
being exported in this file.

Also fix up an indentation problem, and some sparse warnings.

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: ring_sw.c: fix up sparse warnings

NULL usage, static stuff, etc.

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: industrialio-ring.c: fix up sparse warnings

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: accel: fix up some sparse warnings.

Minor stuff (static, NULL, etc.)

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: trigger: fix up some global variables

These should be static.

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: light: tsl2563: fix static sparse warning

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: adc: max1363_ring.c: fix up sparse warnings

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: max1363_core: fix bug in kzalloc call

The operands were switched around :(

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: adc: max1363_core: fix up some sparse warnings

Also fix a minor coding style issue.

Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: light trivial whitespace fix

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: accelerometers trivial checkpatch related fixes

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: Trivial - remove pointless semi colon (checkpatch found)

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: add basic ethtool support

Ethtool allows querying device information and controlling parameters.
For now just add ability to turn on/off scatter/gather.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: add transmit flow control

Keep track of the number of pages sent over transmit and stop
before going over.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: transmit scatter gather support

The transmit management of pages was confusing for handling
fragmented SKB's. (But since NETIF_F_SG was never set, the code was never hit).

The parameter AdditionalRequestPageBufferCount is always one,
(and leads to ugly code), so just inline and add comments.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: use existing Ethernet header size

Use ETH_ALEN to indicate that MAC address is Ethernet.
Also use Linux printk format for mac addresses.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: ring parameter

The ring size parameter should be number of pages (not bytes).
Add module parameter information as well.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: cleanup network driver

Minor stuff:
   * Add module description
   * Remove variable set but never used.
   * Move variable inside conditional

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: hwdrv_apci3xxx.c: loads of sparse cleanups

__iomem pointer fixes, and static cleanups.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: hwdrv_apci3501.h: make a variable static.

Cleans up the sparse warning.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: hwdrv_apci2032.c: static sparse fix

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>