Fix coding style issue which requires a space before the open
curly brace '{', after the open parenthesis '(', after a comma, and
after the equal sign '=' in an assignment.
Also, remove unnecessary whitespace after open parenthesis '(' and
before a quoted newline.
Signed-off-by: An Ha <zero579911@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi skeleton driver is one of the few "hybrid" drivers with
both legacy and PCI attach mechanisms. Instead of splitting this
driver, just remove it. There are many other comedi drivers that
provide better examples.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 13:13:30 +0000 (14:13 +0100)]
staging: comedi: ni_at_a2150: range check board index
The "ni_at_a2150" driver determines the board type by calling
`a2150_probe()`. This reads a register and converts it to a board index
in the range 0 to 3. However, the board table array it indexes into
(`a2150_boards[]`) only has 2 entries. Return an error from the
Comedi driver "attach" handler `a2150_attach()` if the probed board
index is beyond the end of the array.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix coding style issues:
* put braces in all if-else branches;
* limit the length of changed lines to 80 columns.
checkpatch.pl warning count reduces by 3.
staging: unisys: uislib: uislib.c: sparse warning of context imbalance
fixed sparse warning : context imbalance in 'pause_device'
unexpected unlock
this patch will generate warning from checkpatch for
lines over 80 character , but since those are user-visible strings
so it was not modified.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Tested-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: unisys: uislib: uisqueue.c: rewrite of do_locked_client_insert
1) removed unused variables
2) fixed sparse warning of context imbalance in 'do_locked_client_insert'
different lock contexts for basic block
3) removed the call to visor_signalqueue_empty() , this function is
checking whether a signal queue is empty, but the return value
of the function is not beeing used, so it is safe to remove.
staging/lustre: annotate lock/unlock in lov_stripe_lock / lov_stripe_unlock
Annotate the lock/unlock pair in lov_stripe_lock/lov_stripe_unlock to
avoid sparse warning about a context imbalance.
Part of the eudyptula challenge: http://eudyptula-challenge.org/
John L. Hammond [Fri, 5 Sep 2014 20:08:12 +0000 (15:08 -0500)]
staging/lustre/mdc: inline llog methods
In mdc_setup() and mdc_precleanup() call mdc_llog_init() and
mdc_llog_finish() directly rather than through the OBD method wrappers
obd_llog_init() and obd_llod_finish(). Simplify the prototypes of
mdc_llog_init() and mdc_llog_finish() according to their uses.
Signed-off-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Fri, 5 Sep 2014 20:08:10 +0000 (15:08 -0500)]
staging/lustre: remove obd_ost.h
Move the structures defined in lustre/include/obd_ost.h to the one
file that uses them (lustre/osc/osc_request.c). Remove the unused
function osc_update_enqueue(). Remove the then empty header
lustre/include/obd_ost.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In osc_request.c there is no reason to handle any llog contexts since
they are never setup. Remove the functions unused function
osc_llog_init() and the obsolete function osc_llog_finish(). Remove
the llog cleanup code in osc_disconnect() and osc_precleanup().
Signed-off-by: John L. Hammond <john.hammond@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging/lustre: Different prototypes between the declaration and the definition
Align the prototype of lprocfs_wr_uint() in the declaration with the one used
in the definition.
The prototype is:
int lprocfs_wr_uint(struct file *file, const char __user *buffer,
unsigned long count, void *data)
In obdclass/lprocfs_status.c
But in lustre/include/lprocfs_status.h, the __user annotation is missing for
the attribute buffer.
The correct prototype is the first one (the definition) since:
- This function is eventually called by the write() function pointer of an
instance of struct file_operations
- In this function, buffer is a parameter of copy_from_user()
- Before the commit 73bb1da692d0dc3e93b9c9e29084d6a5dcbc37a6, the declaration
and the definition had the same prototype, but only the .c has been updated.
Correcting this will remove a sparse error and add sparse warnings.
This is a task of the Eudyptula challenge.
Fix the warning reported by sparse on drivers/staging/lustre/lnet/lnet/router_proc.c
warning: incorrect type in argument 4 (different address spaces)
The correction is to annotate all user buffer variable by __user
Nicolas Thery [Sat, 6 Sep 2014 05:18:47 +0000 (07:18 +0200)]
staging: rtl8188eu: include missing header
This patch fixes the following sparse warnings:
drivers/staging/rtl8188eu/hal/phy.c:46:5: warning: symbol
'phy_query_bb_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:56:6: warning: symbol
'phy_set_bb_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:129:5: warning: symbol
'phy_query_rf_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:140:6: warning: symbol
'phy_set_rf_reg' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:228:6: warning: symbol
'phy_set_tx_power_level' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:324:6: warning: symbol
'phy_set_bw_mode' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/phy.c:360:6: warning: symbol 'phy_sw_chnl'
was not declared. Should it be static?
Signed-off-by: Nicolas Thery <nthery@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lmv_internal.h:96: ERROR: space prohibited after that open parenthesis '('
lmv_internal.h:96: ERROR: space required before the open parenthesis '('
lmv_internal.h:147: WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Juston Li <juston.h.li@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`struct pci230_private` has two members to manage the enabled interrupt
sources. `int_en` is the interrupt sources we want to be enabled and
`ier` is a shadow of the write-only interrupt enable register. They
have the same value most of the time. They differ in the interrupt
handler (`pci230_interrupt()`) itself when it temporarily clears bits in
the interrupt enable register and the `ier` member in order to unlatch
them in hardware, but leaves the `int_en` member alone. They also
differ in `pci230_ai_stop()` and `pci230_ao_stop()` which clear bits in
the `int_en` member and wait for the interrupt handler to finish before
copying the value to the `ier` member and the interrupt enable register.
Simplify the handling a bit, by making the `ier` member take on the role
of the `int_en` member, and allowing the value to differ from the
interrupt enable register while the interrupt handler is running.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some counter channels may be required for AI commands and AO commands.
Depending on how the commands are set up, it may not be possible to run
both at the same time, so we keep some state and code to find out if the
required resources are busy or not.
The existing code is a bit unwieldy - the code for claiming resources
involves two `for` loops for example. Rewrite it to make it simpler.
The new code just has a bit-mask value for each shared resource (counter
channels), and an array indexed by resource "owners" (AI and AO
commands), so the code for claiming resources now just has a single loop
that checks that none of the other owners have claimed the wanted
resources.
Rename the functions involved, because the old names involving 'put' and
'get' suggested some sort of usage counting.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:53 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: replace `state` member with bitfields
The `state` member of `struct pci230_private` is used with the atomic
bit-op functions and has a couple of bits defined, `AI_CMD_STARTED` and
`AO_CMD_STARTED`. Spin-locks are used to protect the clearing of these
bits and other stuff. No special protection is used for setting these
bits. Replace the `state` member with a couple of new, single-bit
bitfield members, `ai_cmd_started` and `ao_cmd_started` to save some
space.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:51 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: use comedi_range_is_bipolar()
Use the inline `comedi_range_is_bipolar()` function from "comedidev.h"
to decide whether a range is bipolar or unipolar instead of using the
local static arrays `pci230_ai_bipolar[]` and `pci230_ao_bipolar[]`
which can then be removed.
Change the types of the `ai_bipolar` and `ao_bipolar` members of `struct
pci230_private` to `bool` to match the return value of
`comedi_range_is_bipolar()` and change them into single-bit bitfields to
save a bit of space. Also change the type and name of some local
variables in `pci230_ai_check_chanlist()` that hold the result of
`comedi_range_is_bipolar()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:50 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: add `pci230_` prefix to functions
Most functions in "amplc_pci230" are named with the prefix `pci230_`,
apart from one or two that have the prefix `amplc_pci230_` and a few
odd-balls with no particular prefix. Rename the ones without a prefix
for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`pci230_ai_read()` reads a sample from the ADC data register and
converts it to a comedi sample value. The AI sample may have 12 or 16
bits of resolution, depending on the board type, but 12-bit sample
values are in bits 15 to 4 of the register. The hardware value is
signed, 2's complement if set to a bipolar mode, or unsigned, straight
binary if set to a unipolar mode. To convert to a Comedi sample value
it may need shifting right by 4 bits, and the top bit of the sample
value may need to be toggled.
Simplify the existing code by doing the 2's complement to straight
binary conversion before the shift. That way, it is always bit 15 that
is inverted regardless of the resolution.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`pci230_ao_mangle_datum()` converts comedi sample values for the AO
subdevice to hardware register values. The comedi sample value will be
an unsigned value in the range 0 to 4095 (assuming 12-bit resolution).
The hardware wants the value shifted so the m.s. bit of the sample in in
bit 15. If set to a bipolar range, it also expects a 2's complement
value, so the top bit of the sample value needs to be inverted in that
case.
Simplify the existing code by doing the 2's complement conversion after
the shift. That way, it is always bit 15 that is inverted regardless of
the resolution.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `ai_bits`, `ao_bits`, and `min_hwver` members of `struct
pci230_board` are only set to small, non-negative values, so make them
`unsigned char`. The `have_dio` member is used as a boolean so change
it to a bitfield of type `bool`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:44 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: remove ao_chans member
The PCI230(+) has an AO subdevice with 2 channels, but the PCI260(+) has
none.
The `ao_chans` member of `struct pci230_board` indicates whether the
board has an AO subdevice and the number of AO channels. The
`ao_bits` member indicates the AO sample width in bits and will only be
non-zero for boards with an AO subdevice.
Use `ao_bits` to indicate whether the board has an AO subdevice. If it
has, assume the the number of AO channels is 2. Then the `ao_chans`
member becomes redundant and can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:43 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: remove ai_chans member
All boards supported by the "amplc_pci230" driver have 16 AI channels,
so the `ai_chans` member of `struct pci230_board` is superfluous and can
be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`pci230_alloc_private()` is now only called from `pci230_auto_attach()`
to allocate private device storage and initialize various spin-lock
members therein. Absorb the body of `pci230_alloc_private()` into
`pci230_auto_attach()` itself.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:41 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: no need to comedi_set_hw_dev() here
The comedi core module calls `comedi_set_hw_dev()` to associate the
hardware `struct device` with the `struct comedi_device` before it calls
the comedi driver's "auto_attach" hook `pci230_auto_attach()`. There is
no need for `pci230_auto_attach()` to call `comedi_set_hw_dev()` itself,
so remove the call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:39 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: set detach handler to comedi_pci_detach()
Since the comedi driver's "detach`" handler `pci230_detach()` now merely
calls `comedi_pci_detach()` with the same parameter, use
`comedi_pci_detach()` itself as the "detach" handler.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 1 Sep 2014 11:03:38 +0000 (12:03 +0100)]
staging: comedi: amplc_pci230: no need to manipulate PCI ref count
This driver no longer supports a "legacy" attach mechanism that searches
for a suitable PCI device and increments it's reference count, but since
the common "detach" handler `pci230_detach()` still has a left-over
`pci_dev_put()`, a matching `pci_dev_get()` is needed in the
"auto_attach" handler `pci230_auto_attach()`. There is no longer any
reason to "get" and "put" the PCI device, so those calls can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "amplc_pci230" driver currently retains the legacy attach mechanism
to allow devices to be attached manually via the `COMEDI_DEVCONFIG`
ioctl. The only real use for this is to pretend that a PCI230+ or
PCI260+ is a PCI230 or PCI260 for backwards compatibility, as they have
different number of bits of resolution on the AI subdevice. Since the
card would be automatically configured as a PCI230+ or PCI260+ at PCI
probe time anyway, hopefully any users who want it to appear as a PCI230
or PCI260 would have got tired of removing the automatically configured
device and configuring it manually by now and will have updated their
software to cope with the PCI230+ or PCI260+.
Get rid of the legacy attach mechanism by removing the Comedi driver
"attach" handler `pci230_attach()` and associated code. Also remove the
"wildcard" entry from the board table `pci230_boards[]` as it is no
longer needed. Don't bother initializing the `board_name`, `offset`,
and `num_names` members of `struct comedi_driver amplc_pci230_driver`
any longer as they are only needed when configuring the device manually.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch completes two final matters of cleanup which are each too small
for their own patch. It corrects a couple of indentation issues and
removes a return statement at the end of a void function.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci1500: clean some whitespace style issues
Now that commented out code has been removed, else statements can move to
the same line as the close brace of the if statement. Also, a blank line
has been added between declarations and code where needed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / karo-tx-linux.git / log