Bandan Das [Sat, 19 Apr 2014 22:17:45 +0000 (18:17 -0400)]
KVM: nVMX: Ack and write vector info to intr_info if L1 asks us to
This feature emulates the "Acknowledge interrupt on exit" behavior.
We can safely emulate it for L1 to run L2 even if L0 itself has it
disabled (to run L1).
Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Bandan Das [Sat, 19 Apr 2014 22:17:44 +0000 (18:17 -0400)]
KVM: nVMX: Don't advertise single context invalidation for invept
For single context invalidation, we fall through to global
invalidation in handle_invept() except for one case - when
the operand supplied by L1 is different from what we have in
vmcs12. However, typically hypervisors will only call invept
for the currently loaded eptp, so the condition will
never be true.
Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Merge tag 'kvm-s390-20140422' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into queue
Lazy storage key handling
-------------------------
Linux does not use the ACC and F bits of the storage key. Newer Linux
versions also do not use the storage keys for dirty and reference
tracking. We can optimize the guest handling for those guests for faults
as well as page-in and page-out by simply not caring about the guest
visible storage key. We trap guest storage key instruction to enable
those keys only on demand.
Migration bitmap
Until now s390 never provided a proper dirty bitmap. Let's provide a
proper migration bitmap for s390. We also change the user dirty tracking
to a fault based mechanism. This makes the host completely independent
from the storage keys. Long term this will allow us to back guest memory
with large pages.
per-VM device attributes
------------------------
To avoid the introduction of new ioctls, let's provide the
attribute semanantic also on the VM-"device".
Userspace controlled CMMA
-------------------------
The CMMA assist is changed from "always on" to "on if requested" via
per-VM device attributes. In addition a callback to reset all usage
states is provided.
Proper guest DAT handling for intercepts
----------------------------------------
While instructions handled by SIE take care of all addressing aspects,
KVM/s390 currently does not care about guest address translation of
intercepts. This worked out fine, because
- the s390 Linux kernel has a 1:1 mapping between kernel virtual<->real
for all pages up to memory size
- intercepts happen only for a small amount of cases
- all of these intercepts happen to be in the kernel text for current
distros
Of course we need to be better for other intercepts, kernel modules etc.
We provide the infrastructure and rework all in-kernel intercepts to work
on logical addresses (paging etc) instead of real ones. The code has
been running internally for several months now, so it is time for going
public.
GDB support
-----------
We provide breakpoints, single stepping and watchpoints.
Fixes/Cleanups
--------------
- Improve program check delivery
- Factor out the handling of transactional memory on program checks
- Use the existing define __LC_PGM_TDB
- Several cleanups in the lowcore structure
- Documentation
NOTES
-----
- All patches touching base s390 are either ACKed or written by the s390
maintainers
- One base KVM patch "KVM: add kvm_is_error_gpa() helper"
- One patch introduces the notion of VM device attributes
Michael Mueller [Thu, 13 Mar 2014 11:16:45 +0000 (12:16 +0100)]
KVM: s390: Factor out handle_itdb to handle TX aborts
Factor out the new function handle_itdb(), which copies the ITDB into
guest lowcore to fully handle a TX abort.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM: s390: no timer interrupts when single-stepping a guest
When a guest is single-stepped, we want to disable timer interrupts. Otherwise,
the guest will continuously execute the external interrupt handler and make
debugging of code where timer interrupts are enabled almost impossible.
The delivery of timer interrupts can be enforced in such sections by setting a
breakpoint and continuing execution.
In order to disable timer interrupts, they are disabled in the control register
of the guest just before SIE entry and are suppressed in the interrupt
check/delivery methods.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM: s390: move timer interrupt checks into own functions
This patch moves the checks for enabled timer (clock-comparator) interrupts and pending
timer interrupts into own functions, making the code better readable and easier to
maintain.
The method kvm_cpu_has_pending_timer is filled with life.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).
All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM: s390: kernel header addition for guest debugging
This patch adds the structs to the kernel headers needed to pass information
from/to userspace in order to debug a guest on s390 with hardware support.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM: s390: deliver program irq parameters and use correct ilc
When a program interrupt was to be delivered until now, no program interrupt
parameters were stored in the low-core of the target vcpu.
This patch enables the delivery of those program interrupt parameters, takes
care of concurrent PER events which can be injected in addition to any program
interrupt and uses the correct instruction length code (depending on the
interception code) for the injection of program interrupts.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM: s390: extract irq parameters of intercepted program irqs
Whenever a program interrupt is intercepted, some parameters are stored in the
sie control block. These parameters have to be extracted in order to be
reinjected correctly. This patch also takes care of intercepted PER events which
can occurr in addition to any program interrupt.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Jens Freimann [Mon, 10 Feb 2014 09:55:37 +0000 (10:55 +0100)]
s390: fix name of lowcore field at offset 0xa3
According to the Principles of Operation, at offset 0xA3
in the lowcore we have the "Architectural-Mode identification",
not an "access identification".
Heiko Carstens [Wed, 1 Jan 2014 15:55:48 +0000 (16:55 +0100)]
KVM: s390: convert handle_tpi()
Convert handle_tpi() to new guest access functions.
The code now sets up a structure which is copied with a single call to
guest space instead of issuing several separate guest access calls.
This is necessary since the to be copied data may cross a page boundary.
If a protection exception happens while accessing any of the pages, the
instruction is suppressed and may not have modified any memory contents.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heiko Carstens [Wed, 1 Jan 2014 15:37:47 +0000 (16:37 +0100)]
KVM: s390: convert handle_prog()
Convert handle_prog() to new guest access functions.
Also make the code a bit more readable and look at the return code
of write_guest_lc() which was missing before.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The new guest memory access function write_guest() and read_guest() can be
used to access guest memory in an architecture compliant way.
These functions will look at the vcpu's PSW and select the correct address
space for memory access and also perform correct address wrap around.
In case DAT is turned on, page tables will be walked otherwise access will
happen to real or absolute memory.
Any access exception will be recognized and exception data will be stored
in the vcpu's kvm_vcpu_arch.pgm member. Subsequently an exception can be
injected if necessary.
Missing are:
- key protection checks
- access register mode support
- program event recording support
This patch also adds write_guest_real(), read_guest_real(),
write_guest_absolute() and read_guest_absolute() guest functions which can
be used to access real and absolute storage. These functions currently do
not perform any access checks, since there is no use case (yet?).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heiko Carstens [Wed, 1 Jan 2014 15:23:29 +0000 (16:23 +0100)]
KVM: s390: add lowcore access functions
put_guest_lc, read_guest_lc and write_guest_lc are guest access
functions which shall only be used to access the lowcore of a vcpu.
These functions should be used for e.g. interrupt handlers where no
guest memory access protection facilities, like key or low address
protection, are applicable.
At a later point guest vcpu lowcore access should happen via pinned
prefix pages, so that these pages can be accessed directly via the
kernel mapping. All of these *_lc functions can be removed then.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heiko Carstens [Wed, 1 Jan 2014 15:31:49 +0000 (16:31 +0100)]
KVM: s390: add 'pgm' member to kvm_vcpu_arch and helper function
Add a 'struct kvm_s390_pgm_info pgm' member to kvm_vcpu_arch. This
structure will be used if during instruction emulation in the context
of a vcpu exception data needs to be stored somewhere.
Also add a helper function kvm_s390_inject_prog_cond() which can inject
vcpu's last exception if needed.
Add kvm_s390_logical_to_effective() helper which converts a guest vcpu's
logical storage address to a guest vcpu effective address by applying the
rules of the vcpu's addressing mode defined by PSW bits 31 and 32
(extendended and basic addressing mode).
Depending on the vcpu's addressing mode the upper 40 bits (24 bit addressing
mode), 33 bits (31 bit addressing mode) or no bits (64 bit addressing mode)
will be zeroed and the remaining bits will be returned.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heiko Carstens [Wed, 1 Jan 2014 15:08:37 +0000 (16:08 +0100)]
s390/ctl_reg: add union type for control register 0
Add 'union ctlreg0_bits' to easily allow setting and testing bits of
control register 0 bits.
This patch only adds the bits needed for the new guest access functions.
Other bits and control registers can be added when needed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heiko Carstens [Wed, 1 Jan 2014 15:08:06 +0000 (16:08 +0100)]
s390/ptrace: add struct psw and accessor function
Introduce a 'struct psw' which makes it easier to decode and test if
certain bits in a psw are set or are not set.
In addition also add a 'psw_bits()' helper define which allows to
directly modify and test a psw_t structure. E.g.
psw_t psw;
psw_bits(psw).t = 1; /* set dat bit */
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Heiko Carstens [Tue, 17 Dec 2013 08:08:28 +0000 (09:08 +0100)]
KVM: s390: export test_vfacility()
Make test_vfacility() available for other files. This is needed for the
new guest access functions, which test if certain facilities are available
for a guest.
Heiko Carstens [Wed, 1 Jan 2014 15:09:21 +0000 (16:09 +0100)]
KVM: add kvm_is_error_gpa() helper
It's quite common (in the s390 guest access code) to test if a guest
physical address points to a valid guest memory area or not.
So add a simple helper function in common code, since this might be
of interest for other architectures as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Dominik Dingel [Tue, 25 Mar 2014 12:47:11 +0000 (13:47 +0100)]
KVM: s390: make cmma usage conditionally
When userspace reset the guest without notifying kvm, the CMMA state
of the pages might be unused, resulting in guest data corruption.
To avoid this, CMMA must be enabled only if userspace understands
the implications.
CMMA must be enabled before vCPU creation. It can't be switched off
once enabled. All subsequently created vCPUs will be enabled for
CMMA according to the CMMA state of the VM.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[remove now unnecessary calls to page_table_reset_pgste]
Jason J. Herne [Thu, 2 Aug 2012 14:10:17 +0000 (10:10 -0400)]
KVM: s390: Add proper dirty bitmap support to S390 kvm.
Replace the kvm_s390_sync_dirty_log() stub with code to construct the KVM
dirty_bitmap from S390 memory change bits. Also add code to properly clear
the dirty_bitmap size when clearing the bitmap.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> CC: Dominik Dingel <dingel@linux.vnet.ibm.com>
[Dominik Dingel: use gmap_test_and_clear_dirty, locking fixes] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Dominik Dingel [Mon, 24 Mar 2014 13:27:58 +0000 (14:27 +0100)]
KVM: s390/mm: new gmap_test_and_clear_dirty function
For live migration kvm needs to test and clear the dirty bit of guest pages.
That for is ptep_test_and_clear_user_dirty, to be sure we are not racing with
other code, we protect the pte. This needs to be done within
the architecture memory management code.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM: s390/mm: use software dirty bit detection for user dirty tracking
Switch the user dirty bit detection used for migration from the hardware
provided host change-bit in the pgste to a fault based detection method.
This reduced the dependency of the host from the storage key to a point
where it becomes possible to enable the RCP bypass for KVM guests.
The fault based dirty detection will only indicate changes caused
by accesses via the guest address space. The hardware based method
can detect all changes, even those caused by I/O or accesses via the
kernel page table. The KVM/qemu code needs to take this into account.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Dominik Dingel [Tue, 14 Jan 2014 17:10:17 +0000 (18:10 +0100)]
KVM: s390: Allow skeys to be enabled for the current process
Introduce a new function s390_enable_skey(), which enables storage key
handling via setting the use_skey flag in the mmu context.
This function is only useful within the context of kvm.
Note that enabling storage keys will cause a one-time hickup when
walking the page table; however, it saves us special effort for cases
like clear reset while making it possible for us to be architecture
conform.
s390_enable_skey() takes the page table lock to prevent reseting
storage keys triggered from multiple vcpus.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Dominik Dingel [Wed, 29 Jan 2014 15:02:32 +0000 (16:02 +0100)]
KVM: s390: Clear storage keys
page_table_reset_pgste() already does a complete page table walk to
reset the pgste. Enhance it to initialize the storage keys to
PAGE_DEFAULT_KEY if requested by the caller. This will be used
for lazy storage key handling. Also provide an empty stub for
!CONFIG_PGSTE
Lets adopt the current code (diag 308) to not clear the keys.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
With KVM, MMIO is much slower than PIO, due to the need to
do page walk and emulation. But with EPT, it does not have to be: we
know the address from the VMCS so if the address is unique, we can look
up the eventfd directly, bypassing emulation.
Unfortunately, this only works if userspace does not need to match on
access length and data. The implementation adds a separate FAST_MMIO
bus internally. This serves two purposes:
- minimize overhead for old userspace that does not use eventfd with lengtth = 0
- minimize disruption in other code (since we don't know the length,
devices on the MMIO bus only get a valid address in write, this
way we don't need to touch all devices to teach them to handle
an invalid length)
At the moment, this optimization only has effect for EPT on x86.
It will be possible to speed up MMIO for NPT and MMU using the same
idea in the future.
With this patch applied, on VMX MMIO EVENTFD is essentially as fast as PIO.
I was unable to detect any measureable slowdown to non-eventfd MMIO.
Making MMIO faster is important for the upcoming virtio 1.0 which
includes an MMIO signalling capability.
The idea was suggested by Peter Anvin. Lots of thanks to Gleb for
pre-review and suggestions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It is sometimes benefitial to ignore IO size, and only match on address.
In hindsight this would have been a better default than matching length
when KVM_IOEVENTFD_FLAG_DATAMATCH is not set, In particular, this kind
of access can be optimized on VMX: there no need to do page lookups.
This can currently be done with many ioeventfds but in a suboptimal way.
However we can't change kernel/userspace ABI without risk of breaking
some applications.
Use len = 0 to mean "ignore length for matching" in a more optimal way.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 patches from Martin Schwidefsky:
"An update to the oops output with additional information about the
crash. The renameat2 system call is enabled. Two patches in regard
to the PTR_ERR_OR_ZERO cleanup. And a bunch of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/sclp_cmd: replace PTR_RET with PTR_ERR_OR_ZERO
s390/sclp: replace PTR_RET with PTR_ERR_OR_ZERO
s390/sclp_vt220: Fix kernel panic due to early terminal input
s390/compat: fix typo
s390/uaccess: fix possible register corruption in strnlen_user_srst()
s390: add 31 bit warning message
s390: wire up sys_renameat2
s390: show_registers() should not map user space addresses to kernel symbols
s390/mm: print control registers and page table walk on crash
s390/smp: fix smp_stop_cpu() for !CONFIG_SMP
s390: fix control register update
Merge tag 'please-pull-ia64-erratum' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull itanium erratum fix from Tony Luck:
"Small workaround for a rare, but annoying, erratum #237"
* tag 'please-pull-ia64-erratum' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)
=========================================================================
237. Under a complex set of conditions, store to load forwarding for a
sub 8-byte load may complete incorrectly
Problem: A load instruction may complete incorrectly when a code sequence
using 4-byte or smaller load and store operations to the same address
is executed in combination with specific timing of all the following
concurrent conditions: store to load forwarding, alignment checking
enabled, a mis-predicted branch, and complex cache utilization activity.
Implication: The affected sub 8-byte instruction may complete
incorrectly resulting in unpredictable system behavior. There is an
extremely low probability of exposure due to the significant number of
complex microarchitectural concurrent conditions required to encounter
the erratum.
Workaround: Set PSR.ac = 0 to completely avoid the erratum. Disabling
Hyper-Threading will significantly reduce exposure to the conditions
that contribute to encountering the erratum.
Status: See the Summary Table of Changes for the affected steppings.
=========================================================================
[Table of changes essentially lists all models from McKinley to Tukwila]
The PSR.ac bit controls whether the processor will always generate
an unaligned reference trap (0x5a00) for a misaligned data access
(when PSR.ac=1) or if it will let the access succeed when running
on a cpu that implements logic to handle some unaligned accesses.
Way back in 2008 in commit b704882e70d87d7f56db5ff17e2253f3fa90e4f3
[IA64] Rationalize kernel mode alignment checking
we made the decision to always enable strict checking. We were
already doing so in trap/interrupt context because the common
preamble code set this bit - but the rest of supervisor code
(and by inheritance user code) ran with PSR.ac=0.
We now reverse that decision and set PSR.ac=0 everywhere in the
kernel (also inherited by user processes). This will avoid the
erratum using the method described in the Itanium specification
update. Net effect for users is that the processor will handle
unaligned access when it can (typically with a tiny performance
bubble in the pipeline ... but much less invasive than taking a
trap and having the OS perform the access).
1) Fix BPF filter validation of netlink attribute accesses, from
Mathias Kruase.
2) Netfilter conntrack generation seqcount not initialized properly,
from Andrey Vagin.
3) Fix comparison mask computation on big-endian in nft_cmp_fast(),
from Patrick McHardy.
4) Properly limit MTU over ipv6, from Eric Dumazet.
5) Fix seccomp system call argument population on 32-bit, from Daniel
Borkmann.
6) skb_network_protocol() should not use hard-coded ETH_HLEN, instead
skb->mac_len needs to be used. From Vlad Yasevich.
7) We have several cases of using socket based communications to
implement a tunnel. For example, some tunnels are encapsulations
over UDP so we use an internal kernel UDP socket to do the
transmits.
These tunnels should behave just like other software devices and
pass the packets on down to the next layer.
Most importantly we want the top-level socket (eg TCP) that created
the traffic to be charged for the SKB memory.
However, once you get into the IP output path, we have code that
assumed that whatever was attached to skb->sk is an IP socket.
To keep the top-level socket being charged for the SKB memory,
whilst satisfying the needs of the IP output path, we now pass in an
explicit 'sk' argument.
From Eric Dumazet.
8) ping_init_sock() leaks group info, from Xiaoming Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
cxgb4: use the correct max size for firmware flash
qlcnic: Fix MSI-X initialization code
ip6_gre: don't allow to remove the fb_tunnel_dev
ipv4: add a sock pointer to dst->output() path.
ipv4: add a sock pointer to ip_queue_xmit()
driver/net: cosa driver uses udelay incorrectly
at86rf230: fix __at86rf230_read_subreg function
at86rf230: remove check if AVDD settled
net: cadence: Add architecture dependencies
net: Start with correct mac_len in skb_network_protocol
Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer"
cxgb4: Save the correct mac addr for hw-loopback connections in the L2T
net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_W
seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF
qlcnic: Do not disable SR-IOV when VFs are assigned to VMs
qlcnic: Fix QLogic application/driver interface for virtual NIC configuration
qlcnic: Fix PVID configuration on eSwitch port.
qlcnic: Fix max ring count calculation
qlcnic: Fix to send INIT_NIC_FUNC as first mailbox.
qlcnic: Fix panic due to uninitialzed delayed_work struct in use.
...
Function qlcnic_setup_tss_rss_intr() might enter endless
loop in case pci_enable_msix() contiguously returns a
positive number of MSI-Xs that could have been allocated.
Besides, the function contains 'err = -EIO;' assignment
that never could be reached. This update fixes the
aforementioned issues.
Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Mon, 14 Apr 2014 15:11:38 +0000 (17:11 +0200)]
ip6_gre: don't allow to remove the fb_tunnel_dev
It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but
this is unsafe, the module always supposes that this device exists. For example,
ip6gre_tunnel_lookup() may use it unconditionally.
Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we
let ip6gre_destroy_tunnels() do the job).
Introduced by commit c12b395a4664 ("gre: Support GRE over IPv6").
CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 15 Apr 2014 17:47:15 +0000 (13:47 -0400)]
ipv4: add a sock pointer to dst->output() path.
In the dst->output() path for ipv4, the code assumes the skb it has to
transmit is attached to an inet socket, specifically via
ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the
provider of the packet is an AF_PACKET socket.
The dst->output() method gets an additional 'struct sock *sk'
parameter. This needs a cascade of changes so that this parameter can
be propagated from vxlan to final consumer.
Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 15 Apr 2014 16:58:34 +0000 (12:58 -0400)]
ipv4: add a sock pointer to ip_queue_xmit()
ip_queue_xmit() assumes the skb it has to transmit is attached to an
inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership")
changed l2tp to not change skb ownership and thus broke this assumption.
One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(),
so that we do not assume skb->sk points to the socket used by l2tp
tunnel.
Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Reported-by: Zhan Jianyu <nasa4836@gmail.com> Tested-by: Zhan Jianyu <nasa4836@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Mon, 14 Apr 2014 16:48:02 +0000 (18:48 +0200)]
at86rf230: fix __at86rf230_read_subreg function
The __at86rf230_read_subreg function don't mask and shift register
contents which it should do. This patch adds the necessary masks and
shift operations in this function.
Since we have csma support this can make some trouble on state changes.
Since CSMA support turned on some bits in the TRX_STATUS register that
used to be zero, not masking broke checking of the TRX_STATUS field
after commanding a state change.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Mon, 14 Apr 2014 16:48:01 +0000 (18:48 +0200)]
at86rf230: remove check if AVDD settled
The AVDD regulator is only enabled when the RF section is active TX_ON
(PLL_ON) state. Since commit 7dcbd22a97eb0689e6c583ad630ae0e7341e34c1
("ieee802154: ensure that first RF212 state comes from TRX_OFF").
We are in TRX_OFF state at the time at86rf230_hw_init is run.
Note that this test would only fail in case of a severe hardware
malfunction (faulty/shorted power supply, etc.) so it wasn't all that
useful in the first place.
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jean Delvare [Mon, 14 Apr 2014 13:38:49 +0000 (15:38 +0200)]
net: cadence: Add architecture dependencies
The Cadence ethernet chipsets are only used on specific ARM
architectures. Add Kconfig dependencies so that drivers for these
chipsets are only buildable on the relevant architectures.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull KVM fixes from Marcelo Tosatti:
- Fix for guest triggerable BUG_ON (CVE-2014-0155)
- CR4.SMAP support
- Spurious WARN_ON() fix
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: remove WARN_ON from get_kernel_ns()
KVM: Rename variable smep to cr4_smep
KVM: expose SMAP feature to guest
KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode
KVM: Add SMAP support when setting CR4
KVM: Remove SMAP bit from CR4_RESERVED_BITS
KVM: ioapic: try to recover if pending_eoi goes out of range
KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
Pull bmc2835 crypto fix from Herbert Xu:
"This fixes a potential boot crash on bcm2835 due to the recent change
that now causes hardware RNGs to be accessed on registration"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: bcm2835 - fix oops when rng h/w is accessed during registration
smp_read_barrier_depends() can be used if there is data dependency between
the readers - i.e. if the read operation after the barrier uses address
that was obtained from the read operation before the barrier.
In this file, there is only control dependency, no data dependecy, so the
use of smp_read_barrier_depends() is incorrect. The code could fail in the
following way:
* the cpu predicts that idx < entries is true and starts executing the
body of the for loop
* the cpu fetches map->extent[0].first and map->extent[0].count
* the cpu fetches map->nr_extents
* the cpu verifies that idx < extents is true, so it commits the
instructions in the body of the for loop
The problem is that in this scenario, the cpu read map->extent[0].first
and map->nr_extents in the wrong order. We need a full read memory barrier
to prevent it.
The following patchset contains three Netfilter fixes for your net tree,
they are:
* Fix missing generation sequence initialization which results in a splat
if lockdep is enabled, it was introduced in the recent works to improve
nf_conntrack scalability, from Andrey Vagin.
* Don't flush the GRE keymap list in nf_conntrack when the pptp helper is
disabled otherwise this crashes due to a double release, from Andrey
Vagin.
* Fix nf_tables cmp fast in big endian, from Patrick McHardy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: Start with correct mac_len in skb_network_protocol
Sometimes, when the packet arrives at skb_mac_gso_segment()
its skb->mac_len already accounts for some of the mac lenght
headers in the packet. This seems to happen when forwarding
through and OpenSSL tunnel.
When we start looking for any vlan headers in skb_network_protocol()
we seem to ignore any of the already known mac headers and start
with an ETH_HLEN. This results in an incorrect offset, dropped
TSO frames and general slowness of the connection.
We can start counting from the known skb->mac_len
and return at least that much if all mac level headers
are known and accounted for.
Fixes: 53d6471cef17262d3ad1c7ce8982a234244f68ec (net: Account for all vlan headers in skb_mac_gso_segment) CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Daniel Borkman <dborkman@redhat.com> Tested-by: Martin Filip <nexus+kernel@smoula.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode
SMAP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMAP needs to be
manually disabled when guest switches to non-paging mode.
Daniel Borkmann [Mon, 14 Apr 2014 19:45:17 +0000 (21:45 +0200)]
Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer"
This reverts commit ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management
to reflect real state of the receiver's buffer") as it introduced a
serious performance regression on SCTP over IPv4 and IPv6, though a not
as dramatic on the latter. Measurements are on 10Gbit/s with ixgbe NICs.
With the reverted patch applied, the SCTP/IPv4 performance is back
to normal on latest upstream for IPv4 and IPv6 and has same throughput
as 3.4.2 test kernel, steady and interval reports are smooth again.
Fixes: ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") Reported-by: Peter Butler <pbutler@sonusnet.com> Reported-by: Dongsheng Song <dongsheng.song@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Peter Butler <pbutler@sonusnet.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com> Cc: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 14 Apr 2014 19:20:12 +0000 (21:20 +0200)]
net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_W
While reviewing seccomp code, we found that BPF_S_ANC_SECCOMP_LD_W has
been wrongly decoded by commit a8fc927780 ("sk-filter: Add ability to
get socket filter program (v2)") into the opcode BPF_LD|BPF_B|BPF_ABS
although it should have been decoded as BPF_LD|BPF_W|BPF_ABS.
In practice, this should not have much side-effect though, as such
conversion is/was being done through prctl(2) PR_SET_SECCOMP. Reverse
operation PR_GET_SECCOMP will only return the current seccomp mode, but
not the filter itself. Since the transition to the new BPF infrastructure,
it's also not used anymore, so we can simply remove this as it's
unreachable.
Fixes: a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
These audit messages are being triggered via audit_seccomp() through
__secure_computing() in seccomp mode (BPF) filter with seccomp return
codes 0x30000 (== SECCOMP_RET_TRAP) and 0x50000 (== SECCOMP_RET_ERRNO)
during filter runtime. Moreover, Linus reports that x86_64 Chromium
seems fine.
The underlying issue that explains this is that the implementation of
populate_seccomp_data() is wrong. Our seccomp data structure sd that
is being shared with user ABI is:
Therefore, a simple cast to 'unsigned long *' for storing the value of
the syscall argument via syscall_get_arguments() is just wrong as on
32-bit x86 (or any other 32bit arch), it would result in storing a0-a5
at wrong offsets in args[] member, and thus i) could leak stack memory
to user space and ii) tampers with the logic of seccomp BPF programs
that read out and check for syscall arguments:
syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]);
Tested on 32-bit x86 with Google Chrome, unfortunately only via remote
test machine through slow ssh X forwarding, but it fixes the issue on
my side. So fix it up by storing args in type correct variables, gcc
is clever and optimizes the copy away in other cases, e.g. x86_64.
Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set") Reported-and-bisected-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 14 Apr 2014 17:43:58 +0000 (13:43 -0400)]
Merge branch 'qlcnic'
Shahed Shaikh says:
====================
qlcnic: Bug fixes
This patch series contains following bug fixes -
* Send INIT_NIC_FUNC mailbox command as first mailbox
* Fix a panic because of uninitialized delayed_work.
* Fix inconsistent calculation of max rings count.
* Fix PVID configuration issue. Driver needs to clear older
PVID before adding new one.
* Fix QLogic application/driver interface by packing vNIC information
array.
* Fix a crash when user tries to disable SR-IOV while VFs are
still assigned to VMs.
Please apply to net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
qlcnic: Do not disable SR-IOV when VFs are assigned to VMs
o While disabling SR-IOV when VFs are assigned to VMs causes host crash
so return -EPERM when user request to disable SR-IOV using pci sysfs in
case of VFs are assigned to VMs.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qlcnic: Fix QLogic application/driver interface for virtual NIC configuration
o Application expect vNIC number as the array index but driver interface
return configuration in array index form.
o Pack the vNIC information array in the buffer such that application can
access it using vNIC number as the array index.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Clear older PVID before adding a newer PVID to the eSwicth port
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Do not read max rings count from qlcnic_get_nic_info(). Use driver defined
values for 82xx adapters. In case of 83xx adapters, use minimum of firmware
provided and driver defined values.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qlcnic: Fix to send INIT_NIC_FUNC as first mailbox.
o INIT_NIC_FUNC should be first mailbox sent. Sending DCB capability and
parameter query commands after that command.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qlcnic: Fix panic due to uninitialzed delayed_work struct in use.
o AEN event was being received before initializing delayed_work struct
and handlers for it. This was resulting in crash. This patch fixes it.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 14 Apr 2014 17:41:42 +0000 (13:41 -0400)]
Merge branch 'be2net'
Sathya Perla says:
====================
be2net: patch set
Patch 1/2 is a v2 of a patch that was submitted earlier (as a part of a
different patch-set). v2 incorporates a suggestion given by David Laight
for how long to poll for pending TX completions while disabling a device.
Patch 2/2 fixes a crash in be_remove()->be_close()
path after be2net has aborted an EEH error recovery
due to a permanant failure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh AP [Mon, 14 Apr 2014 10:42:41 +0000 (16:12 +0530)]
be2net: Fix invocation of be_close() after be_clear()
In the EEH error recovery path, when a permanent failure occurs,
we clean up adapter structure (i.e. destroy queues etc) by calling
be_clear() and return PCI_ERS_RESULT_DISCONNECT.
After this the stack tries to remove device from bus and calls
be_remove() which invokes netdev_unregister()->be_close().
be_close() operating on destroyed queues results in a
NULL dereference.
This patch fixes this problem by introducing a flag to keep track
of the setup state.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
be2net: Fix to reap TX compls till HW doesn't respond for some time
be_close() currently waits for a max of 200ms to receive all pending
TX compls. This timeout value was roughly calculated based on 10G
transmission speeds and the TX queue depth. This timeout may not be
enough when the link is operating at lower speeds or in multi-channel/SR-IOV
configs with TX-rate limiting setting.
It is hard to calculate a "proper timeout value" that works in all
configurations. This patch solves this problem by continuing to reap
TX completions till the HW is completely silent for a period of 10ms or
a HW error is detected.
v2: implements the new scheme (as suggested by David Laight) instead of
just waiting longer than 200ms for reaping all completions.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log